QA: Difference between revisions

From Yocto Project
Jump to navigationJump to search
No edit summary
No edit summary
Line 67: Line 67:


# Boot the image in the target by following the [http://www.yoctoproject.org/docs/2.2/mega-manual/mega-manual.html#building-an-image-for-hardware building an image for hardware] instructions.
# Boot the image in the target by following the [http://www.yoctoproject.org/docs/2.2/mega-manual/mega-manual.html#building-an-image-for-hardware building an image for hardware] instructions.
# Run the image tests by following the [https://wiki.yoctoproject.org/wiki/BSP_Test_Plan#Automated_Tests image test]  
# Run the image tests by following the [https://wiki.yoctoproject.org/wiki/BSP_Test_Plan#Automated_Tests image test] or [http://www.yoctoproject.org/docs/2.2/mega-manual/mega-manual.html#exporting-tests exporting tests] instructions.
or [http://www.yoctoproject.org/docs/2.2/mega-manual/mega-manual.html#exporting-tests exporting tests] instructions.


===Setting up Targets with Devauto===
===Setting up Targets with Devauto===

Revision as of 02:28, 18 June 2019

New QA Process

Current Release QA Trackers

Current Release QA Test Plans

Current Release QA Test Cases

Test Execution

Autobuilder

The AutoBuilder is Yocto Project's tool for non-manual test execution, it performs the following functions:

  • A scheduled nightly build and test execution that includes:
  • A service for on demand testing requests. (Partially working, feature in progress at request #9880)

Yocto Project QA heavily relies in the Autobuilder thanks to the aforementioned scheduled and on demand test execution features.

Image Testing

In order to execute tests in an image, it is necessary to boot it in either a virtual or a physical target.

Testing Images in Virtual Targets:

The execution in a virtual environment has a nice flow, documented in the Image Tests Enabling... section.

Testing Images in Physical Targets:

For executing tests in physical targets it would be required to:

  1. Boot the image in the target by following the building an image for hardware instructions.
  2. Run the image tests by following the image test or exporting tests instructions.

Setting up Targets with Devauto

Manual instructions for setting up the physical test targets appear in many parts of the Yocto Project documentation (i.e. here). It is easy to setup one target using those instructions but it becomes challenging for the cases where multiple targets have to be prepared or the case where it is required to serialize a changing setup over time, for one: testing on several images using the same target.

Devauto is the Python library and command line interface intended to manage the device automation assets that act upon the target's physical state. Refer to the Devauto documentation for more information about the hardware supported and the library and CLI functionality.

Creating and Adding New Tests

Tests for a given component can be automated in the AutoBuilder. With that purpose, follow the Adding Automated Tests to the Autobuilder Guide.

A list of tests that are automated can be seen here.

Reporting

Performance testing

Performance Test

QA Resources

Archive

You can find the previous QA work by release in the Yocto Project QA Archive.

Other Relevant Data

List of Automated Tests