Yocto Project 2.6 Release Test Plan
Reversion history
| Version | Modifier | Comments |
|---|---|---|
| 1.0 | Yeoh Ee Peng | First draft |
References
Documents that support this test plan
Introduction
This is the the overall test plan for version 2.6 of the Yocto Project, for all the generic information this document will be pointing to QA Master Test Plan
Objectives
This test plan for Yocto Project 2.6 release supports the following objectives:
- To define the tools to be used throughout the testing process.
- To communicate to the responsible parties the items to be tested, set expectations around schedule, and define environmental needs.
- To define how the tests will be conducted.
- Release Criteria
- Risks and contingencies
QA_Master_Test_Plan#Objectives_and_Tasks
Risk Analysis & Contingency Plan
This is the document for Risk Analysis https://docs.google.com/spreadsheets/d/1K-MZYo5sfabwI2UozGp6Uuh2sw5y309bXkyEZRPEEgk/edit#gid=0
Test Strategy
Is followed the general strategy defined on QA_Master_Test_Plan#Testing_Strategy and below is showed specific information applicable only for 2.6 Release
Bugs Tracking
- Bugs that need to be implemented by QA Team
- Bugs that need to be verified by QA Team
- Old Bugs that need to be Verified
Test Items
The Yocto Project QA team verifies each release against recent versions of the most popular Linux distributions that provide stable releases.
* centos 7 * Debian 9 * Fedora 26 * Fedora 27 * OpenSuse42.3 * ubuntu 16.04 * ubuntu 17.10
Test Cases
Test Matrix
The components to be tested for version 2.6 of the Yocto Project against the different milestones are included in this section:
| Code of Colors |
|---|
| Active
Tracked on Testpoia |
| Active
Non Tracked on Testopia |
| In Design
Will be tracked on Tesopia |
| Inactive |
ADT
| Component | Environment | Auto | Manual | Owner |
|---|---|---|---|---|
| ADT | Fedora 25 i686 | Y | Y | PG |
| Ubuntu 16.04 x86_64 | Y | Y | PG |
Eclipse Plugin
| Component | Environment | Auto | Manual | Owner |
|---|---|---|---|---|
| Neon + Any Distro | Y | PG | ||
| Oxygen + Any Distro | Y | PG |
Kernel
| Component | Environment | Auto | Manual | Owner |
|---|---|---|---|---|
| Kernel | Any Distro | Y | PG |
Meta-Yocto
| Component | Environment | Auto | Manual | Owner |
|---|---|---|---|---|
| Meta-Yocto | Any Distro | Y | PG |
Toaster
| Component | Environment | Auto | Manual | Owner |
|---|---|---|---|---|
| Toaster | Any Distro | Y | PG |
eSDK
| Component | Environment | Auto | Manual | Owner |
|---|---|---|---|---|
| eSDK | Any Distro + runtime | Y | PG | |
| Any Distro + selftest | Y | PG |
Selftest
| Component | Environment | Auto | Manual | Owner |
|---|---|---|---|---|
| OE-CORE | Ubuntu 16.04 | Y | PG | |
| Ubuntu 17.10 | Y | PG | ||
| OpenSuse 42.3 | Y | PG | ||
| Debian 9 | Y | PG | ||
| Centos 7 | Y | PG | ||
| Fedora 26 | Y | PG | ||
| Fedora 27 | Y | PG |
Bitbake
| Component | Environment | Auto | Manual | Owner |
|---|---|---|---|---|
| Bitbake | Any Distro | Y | PG |
Build - Apliance
| Component | Environment | Auto | Manual | Owner |
|---|---|---|---|---|
| Build - Apliance | VM - Any Distro | Y | PG |
Package Manager
| Component | Environment | Auto | Manual | Owner |
|---|---|---|---|---|
| Package Manager | Any Distro | Y | PG |
Performance
| Component | Environment | Auto | Manual | Owner |
|---|---|---|---|---|
| Performance | Centos 7 | Y | PG | |
| Ubuntu 16.04 | Y | PG |
BSP/QEMU
| Component | Arch | HW | Environment | Image | Auto | Manual | pTest | Compliance |
|---|---|---|---|---|---|---|---|---|
| BSP | x86 | MinwTurbot 32bit | genericx86 | core-image-sato-sdk | Y | |||
| core-image-lsb-sdk | Y | |||||||
| MinwTurbot 64bit | genericx86-64 | core-image-sato-sdk | Y | Y | ||||
| core-image-lsb-sdk | Y | |||||||
| NUC 6 | genericx86-64 | core-image-sato-sdk | Y | Y | ||||
| core-image-lsb-sdk | Y | Y | ||||||
| NUC 7 | genericx86-64 | core-image-sato-sdk | Y | Y | ||||
| core-image-lsb-sdk | Y | |||||||
| QEMU | qemux86 | core-image-sato-sdk | Y | Y | ||||
| core-image-lsb-sdk | Y | |||||||
| qemux86-64 | core-image-sato-sdk | Y | Y | |||||
| core-image-lsb-sdk | Y | |||||||
| non x86 | EdgeRouter | EdgeRouter | core-image-sato-sdk | Y | Y | |||
| MPC8315e-rdb | MPC8315e-rdb | core-image-sato-sdk | Y | Y | ||||
| Beaglebone Black | Beaglebone | core-image-sato-sdk | Y | Y | ||||
| QEMU | qemuarm | core-image-sato-sdk | Y | Y | ||||
| qemuarm-64 | core-image-sato-sdk | Y | Y | |||||
| qemuppc | core-image-sato-sdk | Y | Y | |||||
| qemumips | core-image-sato-sdk | Y | Y | |||||
| qemumips64 | core-image-sato-sdk | Y | Y | |||||
| Meta-Intel | MinwTurbot 32bit | core2-32 | core-image-sato-sdk | Y | ||||
| core-image-lsb-sdk | Y | |||||||
| MinwTurbot 64bit | corei7-64 | core-image-sato-sdk | Y | Y | ||||
| core-image-lsb-sdk | Y | |||||||
| NUC 6 | corei7-64 | core-image-sato-sdk | Y | |||||
| core-image-lsb-sdk | Y | |||||||
| NUC 7 | corei7-64 | core-image-sato-sdk | Y | Y | ||||
| core-image-lsb-sdk | Y | |||||||
| poky-tiny | Y |
All component to be tested on 2.6 are in #Test Items a detailed list of features per component can be found in Test Plan of the components QA_Master_Test_Plan#Component
Testopia Templates
Features pending to be tested
Here is a list of areas that are not yet covered and need some work, implement test cases and add it to a component that belongs or create a new test plan for new component.
ADD FEATURES !!!!!!!!!!
The complete List of QA Implementations for YP 2.6 can be found at Features Implementation by QA Team
Features Not to be tested
Approach
Tests will be conducted per the documented test cases stored in Testopia. The test manager will create test runs for each tester. The tester will execute the tests in Testopia and mark each case as Pass / Fail / Skip /Blocked. The tester should leave notes on actual results and any other relevant details when possible.
Once complete, the test manager should review the test run reports in Testopia and report back to the team by mail and in the wiki as a test report.
Pass / Fail Criteria
This criteria is defined in Yocto_Project_v2.6_Status#Yocto_Project_v2.6_Release_Criteria
Exit Criteria
As defined in QA_Master_Test_Plan#Entry and Exit Criteria
Test Deliverables
- Live Status 2.6_QA_Status
- Final execution Report #Execution History
- Mail sent to the mailing list
Test Environment
There are different environments and tools for every type of testing refer to QA_Master_Test_Plan#Test_Areas for more detailed information.
Schedule
M1 (Apr 30, 2018 to Jun 22, 2018)
M1 Feature/Tasks Development / Cutoff is Jun. 11, 2017
| ID | Requester | Assignee | E | Summary (2 tasks) ⇒ | Severity | P | Whiteboard | Status |
|---|---|---|---|---|---|---|---|---|
| 12689 | Anuj Mittal | Anuj Mittal | 1 | wic should be able to use initrd value for grub | enhancement | High | RESOLVED | |
| 10744 | Jose Perez C | Richard Purdie | 5 | Update test case of smartpm/createrepo under meta/lib/oeqa/runtime | enhancement | Medium+ | RESOLVED | |
| 6 |
M1 Bugs
| ID | Requester | Assignee | E | Summary (14 tasks) ⇒ | Severity | P | Whiteboard | Status |
|---|---|---|---|---|---|---|---|---|
| 12224 | brian avery | Anuj Mittal | 2 | wic image created for qemux86-64 stalls on undefined video mode number: 318 | normal | Medium | RESOLVED | |
| 12773 | pankaj yadav | Anuj Mittal | [Meta-Yocto :2.4.3RC2] QA_WARN and QA_ERROR Mechanism checking Failed | normal | Medium+ | RESOLVED | ||
| 12757 | He Zhe | Bruce Ashfield | kernel do_configure fails to use tools in recipe-sysroot-native | critical | Medium+ | RESOLVED | ||
| 12741 | Ross Burton | Hongxu Jia | distcc: upgrade to 3.3 | normal | Medium+ | RESOLVED | ||
| 12656 | Juro Bystricky | Maxin B. John | at-spi2-core_2.28.0.bb:do_compile error | normal | Medium+ | RESOLVED | ||
| 12711 | Aaron Chan | Mohamad Noor Alim | [2.5 M3 rc1][nightly-arm64][fedora 27][autobuilder2] - Event handler runqueue_stats failed | major | Medium+ | RESOLVED | ||
| 12736 | Mohamad Noor Alim | Mohamad Noor Alim | 2.5 rc1: CentOS 7 oe-selftest fail at runtime_test.TestImage.test_testimage_dnf | normal | Medium+ | RESOLVED | ||
| 12739 | Matt Hoosier | Richard Purdie | Fetcher for Git submodules ('gitsm') bypasses BB_NO_NETWORK checks | normal | Medium+ | Backport to YP 2.4 and 2.5 | RESOLVED | |
| 12765 | Hains | Richard Purdie | Race condition do_package_write_ipk fails due to empty package-split dir. | normal | Medium+ | RESOLVED | ||
| 12756 | Armin Kuster | Ross Burton | [ross/MUT] nightly-oecore failed | normal | Medium+ | RESOLVED | ||
| 12475 | Amber Elliot | Stephen K Jolley | 1 | Bug tracking BKMS should be documented | normal | Medium+ | 10 May 2018: IN PROGRESS REVIEW | RESOLVED |
| 12517 | Stephano Cetola | Scott Rifenbark | 1 | Update documentation on gen-tapdevs script | normal | Medium+ | 15 May 2018: RESOLVED | RESOLVED |
| 11567 | Phlip Balister | Stephano Cetola | 1 | Trying to create an new layer with the yocto-layer script fails. | normal | Medium+ | May 15 2018: RESOLVED | RESOLVED |
| 12772 | Scott Branden | Tim Orling | bitbake after devtool doesn't work properly with qemu | normal | Medium+ | RESOLVED | ||
| 5 |
The planed schedule for 2.6 can be found at Yocto_2.6_Schedule
Live Schedule & Execution History
| MILESTONE | STARTED | FINISHED | STATUS | REPORT |
|---|---|---|---|---|
| M1 rc1 | 6/19/2018 | 7/2/2018 | DONE | https://wiki.yoctoproject.org/wiki/WW27_-_2018-07-02_-_Full_Test_Cycle_2.6_M1_rc1 |
