Minnow Bug Triage
From Yocto Project
Jump to navigationJump to search
Goal
The output of the bug triage meeting should be that all bugs have an owner, a target milestone, and a priority.
Prior to the meeting, each Product Owner should review their Weekly New and High Bugs and be ready with any opens. An example open would be a bug that may need to change Products.
Agenda
- Opens
- Collect opens
- Discuss opens
- Review Queries
- State number and owner
- Owner makes any modifications
- Assign owner, target milestone, and priority.
Note: for Yocto Project bugs go to: Bug Triage
Bug Criteria
- Priority-Severity
- High-Critical: Two Week
- High: Milestone
- Medium: Nice to have for milestone, must have for release
MinnowBoard Bug Triage Searches
Non-Prioritized Bugs
| ID | Summary | Severity | P | Milestone | Assignee | Status | Whiteboard | E |
|---|---|---|---|---|---|---|---|---|
| 0 |
MinnowBoard v1 Open Bugs
| ID | Summary | Severity | P | Milestone | Assignee | Status | Whiteboard | E |
|---|---|---|---|---|---|---|---|---|
| 0 |
MinnowBoard-MAX Open Bugs
| ID | Summary | Severity | P | Milestone | Assignee | Status | Whiteboard | E |
|---|---|---|---|---|---|---|---|---|
| 0 |
MinnowBoard-MAX Closed Bugs
| ID | Summary (15 tasks) ⇒ | Severity | P | Milestone | Assignee | Status | Whiteboard | E |
|---|---|---|---|---|---|---|---|---|
| 6185 | Alsa does not detect the audio device | major | High | --- | Darren Hart | VERIFIED | ||
| 6190 | Firmware doesn't autodetect and boot FS0:/EFI/BOOT/bootx64.efi | minor | Medium | Production Release | Darren Hart | VERIFIED | ||
| 6199 | High Speed Expansion Testing | normal | High | A1 Release | David Anders | VERIFIED | ||
| 6470 | Specify ACPI SPI UID=0 | normal | Medium | Production Release | Darren Hart | VERIFIED | ||
| 6486 | ALSA device is not detected by OS (bad VERB tables maybe?) | critical | High | Production Release | He, Tim | VERIFIED | ||
| 6488 | Enable Calamari LPSS devices by default | normal | Medium+ | Production Release | Darren Hart | VERIFIED | ||
| 7770 | Errors found on dmesg MM 32 bits firmware for core-sato-sdk image | normal | Medium | 1.9 | California Sullivan | VERIFIED | ||
| 7898 | Dmesg error controller can't do DEVSLP on Minnow Max | normal | Low | 1.9 | California Sullivan | VERIFIED | ||
| 7901 | Dmesg error failed to retrieve link info, disabling eDP on Minnow Max | normal | Low | 1.9 | California Sullivan | VERIFIED | ||
| 8473 | Parselogs error: Online check failed for 0xb77b2ab0 Wired on lsb image | normal | Medium | 2.1 | Saul Wold | VERIFIED | ||
| 8689 | Parselogs error: can't open '/dev/ttyPCH0': No such file or directory^M in lsb image | normal | Medium | 2.1 | Cristina Agurida | VERIFIED | 3 | |
| 9860 | LAN device doesn't retrieve connection after resume from suspend state | normal | Medium+ | 2.2 M3 | David Rodriguez | VERIFIED | ||
| 10262 | SD card not being recognized when trying to install the image | normal | Medium+ | 2.2 M4 | Alejandro Hernandez | VERIFIED | YP 2.2 M4 RC1 BUILD BLOCKING BUG | |
| 10514 | test_parselogs on genericx86-lsb minnow board max 32 FAILED LOGIN (1) on '/dev/tty1' FOR 'UNKNOWN', Authentication failure | normal | Medium | 2.3 | David Lopez Barriba | VERIFIED | possible 2.2.1 | |
| 12213 | [TC 1059] test_parselogs failed on MMAX64 (Turbot) with direct firmware load for rtl_nic/rtl8168g-2.fw error | normal | Medium | 2.5 | California Sullivan | VERIFIED | ||
| 15 |
