Minnow Bug Triage: Difference between revisions
From Yocto Project
Jump to navigationJump to search
| (3 intermediate revisions by the same user not shown) | |||
| Line 18: | Line 18: | ||
= Bug Criteria = | = Bug Criteria = | ||
* Priority-Severity | * Priority-Severity | ||
** High | ** High: Two Week | ||
** | ** Medium+: Milestone | ||
** Medium: Nice to have for milestone, must have for release | ** Medium: Nice to have for milestone, must have for release | ||
| Line 35: | Line 35: | ||
}} | }} | ||
== | == NEEDINFO == | ||
{{#bugzilla: | {{#bugzilla: | ||
|status= | |status=NEEDINFO | ||
|hardware=MinnowBoard | |hardware=MinnowBoard,MinnowBoard MAX | ||
|columns=id,summary,to,status,severity,priority,milestone,whiteboard | |||
|columns=id,summary,severity,priority,milestone | |||
|sort=id | |sort=id | ||
|noresultsmessage="No matching bugs found." | |noresultsmessage="No matching bugs found." | ||
| Line 50: | Line 49: | ||
|hardware=MinnowBoard Max | |hardware=MinnowBoard Max | ||
|severity=!janitors | |severity=!janitors | ||
|columns=id,summary,severity,priority,milestone,to,status, | |columns=id,summary,severity,priority,milestone,to,status,component,estimated | ||
|sort=id | |sort=id | ||
|noresultsmessage="No matching bugs found." | |noresultsmessage="No matching bugs found." | ||
|total=summary | |total=summary | ||
}} | }} | ||
== MinnowBoard-MAX Closed Bugs == | == MinnowBoard-MAX Closed Bugs == | ||
{{#bugzilla: | {{#bugzilla: | ||
Latest revision as of 23:04, 20 October 2015
Goal
The output of the bug triage meeting should be that all bugs have an owner, a target milestone, and a priority.
Prior to the meeting, each Product Owner should review their Weekly New and High Bugs and be ready with any opens. An example open would be a bug that may need to change Products.
Agenda
- Opens
- Collect opens
- Discuss opens
- Review Queries
- State number and owner
- Owner makes any modifications
- Assign owner, target milestone, and priority.
Note: for Yocto Project bugs go to: Bug Triage
Bug Criteria
- Priority-Severity
- High: Two Week
- Medium+: Milestone
- Medium: Nice to have for milestone, must have for release
MinnowBoard Bug Triage Searches
Non-Prioritized Bugs
| ID | Summary | Severity | P | Milestone | Assignee | Status | Whiteboard | E |
|---|---|---|---|---|---|---|---|---|
| 0 |
NEEDINFO
| ID | Summary | Assignee | Status | Severity | P | Milestone | Whiteboard |
|---|---|---|---|---|---|---|---|
| 0 |
MinnowBoard-MAX Open Bugs
| ID | Summary | Severity | P | Milestone | Assignee | Status | Component | E |
|---|---|---|---|---|---|---|---|---|
| 0 |
MinnowBoard-MAX Closed Bugs
| ID | Summary (141 tasks) ⇒ | Severity | P | Milestone | Assignee | Status | Whiteboard | E |
|---|---|---|---|---|---|---|---|---|
| 6178 | No firmware Ethernet driver to support 1Gb. | critical | Medium+ | A1 Release | Michael Krau | RESOLVED | ||
| 6179 | DRM Initiation hang without a display. | critical | Medium | --- | Victor Rodriguez | RESOLVED | ||
| 6180 | Unable to see or boot from microSD card. | critical | High | A1 Release | Darren Hart | RESOLVED | ||
| 6181 | Firmware settings are not being saved between reboots. | normal | Medium | --- | He, Tim | RESOLVED | ||
| 6182 | Currently takes more then 2 secs to get the the EFI. Need <.5 sec. | normal | Medium | Production Release | David_Wei | RESOLVED | ||
| 6183 | Resume from S3 fails | critical | Medium | Pre-Production Relea | David_Wei | RESOLVED | ||
| 6184 | USB 3.0 is not being driven properly | critical | High | A1 Release | He, Tim | RESOLVED | ||
| 6185 | Alsa does not detect the audio device | major | High | --- | Darren Hart | VERIFIED | ||
| 6186 | HDMI gpio usage issue | major | Medium | Pre-Production Relea | David Anders | RESOLVED | ||
| 6187 | "Bad displays are connected" error when booting without an HDMI monitor. | major | High | --- | Darren Hart | RESOLVED | ||
| 6188 | without a known-good display, the firmware will fail to boot to the shell | major | Medium+ | --- | Darren Hart | RESOLVED | ||
| 6189 | Minnowboard MAX EDKII implementation | major | High | Pre-Production Relea | Divya Mahesh | RESOLVED | ||
| 6190 | Firmware doesn't autodetect and boot FS0:/EFI/BOOT/bootx64.efi | minor | Medium | Production Release | Darren Hart | VERIFIED | ||
| 6191 | If you remove the SD card while in the shell it must do a reset/reboot | minor | Medium | Pre-Production Relea | Darren Hart | RESOLVED | ||
| 6192 | Doesn't seem to recognize my Lilliput HDMI display | normal | Medium | --- | Stephen K Jolley | RESOLVED | ||
| 6193 | The Ethernet Address is not provided in hardware, we have to do it via Firmware like we did for MinnowBoard 1 | critical | High | A1 Release | Michael Krau | RESOLVED | ||
| 6194 | Ethernet device does not apper in lsbpi | major | High | --- | Darren Hart | RESOLVED | ||
| 6195 | USB 3.0 doesn't work | critical | Medium+ | --- | David Anders | RESOLVED | ||
| 6196 | CPU Heatsink pin just shot me in the eye! | minor | Undecided | --- | David Anders | RESOLVED | ||
| 6197 | SATA - 5 volt Dongle doesn't work at this time. | major | Undecided | --- | David Anders | RESOLVED | ||
| 6198 | Low Speed Expansion Card Testing | normal | High | A1 Release | Darren Hart | RESOLVED | ||
| 6199 | High Speed Expansion Testing | normal | High | A1 Release | David Anders | VERIFIED | ||
| 6200 | JTAG Testing | critical | High | --- | Divya Mahesh | RESOLVED | ||
| 6209 | [MinnowMax] Alsa playback is silent | normal | Medium | Future | Darren Hart | RESOLVED | ||
| 6265 | LPSS configuration requires everything enabled | normal | Medium | A1 Release | He, Tim | RESOLVED | ||
| 6266 | LPSS configuration help is misleading / inaccurate | normal | Medium | A1 Release | Darren Hart | RESOLVED | ||
| 6280 | [intel-corei7-64][MinnowMax] serial8250: too much work for irq4 messages | normal | Medium | Future | California Sullivan | RESOLVED | 3 | |
| 6340 | Option to toggle UART Flow Control | normal | Medium | A1 Release | Darren Hart | RESOLVED | ||
| 6429 | Key to interrupt boot and enter BIOS menu isn't displayed to user | normal | Medium+ | Production Release | He, Tim | RESOLVED | ||
| 6431 | Changing BIOS options renders board ubootable | critical | High | Pre-Production Relea | Darren Hart | RESOLVED | ||
| 6468 | MinnowMax can be run on power from either USB port | minor | Low | A4 Release | David Anders | RESOLVED | ||
| 6470 | Specify ACPI SPI UID=0 | normal | Medium | Production Release | Darren Hart | VERIFIED | ||
| 6471 | ACPI Reduce severity of Linux kernel S2 missing message | normal | Low | Future | Unassigned | RESOLVED | ||
| 6472 | ACPI errors (LPSS ACPI Enumeration) | normal | Medium | Pre-Production Relea | Darren Hart | RESOLVED | ||
| 6485 | Potential issue parsing EDID in firmware | major | Medium | Production Release | He, Tim | RESOLVED | ||
| 6486 | ALSA device is not detected by OS (bad VERB tables maybe?) | critical | High | Production Release | He, Tim | VERIFIED | ||
| 6488 | Enable Calamari LPSS devices by default | normal | Medium+ | Production Release | Darren Hart | VERIFIED | ||
| 6531 | GPIO Pin Muxes not being set properly | normal | Medium | A1 Release | John 'Warthog9' Hawley | RESOLVED | ||
| 6532 | uEFI Networking booting lacks clear indication of what's going on | normal | Medium | A1 Release | David_Wei | RESOLVED | ||
| 6533 | uEFI Network booting should be default to last priority | normal | Medium | A1 Release | John 'Warthog9' Hawley | RESOLVED | ||
| 6554 | SMBIOS Strings need to be populated | normal | Medium+ | Production Release | John 'Warthog9' Hawley | RESOLVED | ||
| 6555 | Provide User-Centric BIOS configuration menus | enhancement | Low | Production Release | Michael Krau | RESOLVED | ||
| 6556 | Intel SSD in USB 3.0 enclosure with USB 3.0 hub not detected at boot time when plugged into USB 2.0 port | normal | Low | Production Release | He, Tim | RESOLVED | ||
| 6557 | Ethernet Link light (left light) is on when no cables or connection present | minor | Medium | Production Release | David Anders | RESOLVED | ||
| 6578 | SD DDR50 support should be disabled by default in the BIOS settings | normal | Low | Production Release | He, Tim | RESOLVED | ||
| 6585 | Firmware doesn't boot past progress bar after power cycle | critical | High | Production Release | He, Tim | RESOLVED | ||
| 6599 | HDMI-DVI conversion does not work: fix in GOP driver required | normal | Medium | Production Release | John 'Warthog9' Hawley | RESOLVED | ||
| 6627 | Minnowboard Max fails to load the SPI device | normal | Medium | Future | Unassigned | RESOLVED | ||
| 6628 | LPSS devices should be in ACPI mode by default | normal | Medium | Production Release | David_Wei | RESOLVED | ||
| 6635 | Serial console no longer display POST messages | major | Undecided | --- | He, Tim | RESOLVED | ||
| 6652 | unable to change boot order | normal | Medium+ | Pre-Production Relea | John 'Warthog9' Hawley | RESOLVED | ||
| 6663 | P-states reports incorrect max frequency | normal | Medium | A2 Release | John 'Warthog9' Hawley | RESOLVED | ||
| 6672 | I2C Touch HID device should be removed from DSDT | normal | Medium | Production Release | Ivan Rouzanov | CLOSED | ||
| 6673 | Bluetooth device should be removed from DSDT | normal | Medium | Production Release | Ivan Rouzanov | CLOSED | ||
| 6674 | GPS device should be removed from DSDT | normal | Medium+ | Production Release | Ivan Rouzanov | CLOSED | ||
| 6679 | Trusted Execution Engine (TXE) exposed over PCI | normal | Medium | Production Release | Marcel Holtmann | RESOLVED | ||
| 6695 | Firmware doesn't output anything on serial during during 5 second timeout | major | Medium | Q4 2014 | John 'Warthog9' Hawley | RESOLVED | ||
| 6696 | I2C number changed in Firmware? | normal | Medium | Production Release | John 'Warthog9' Hawley | RESOLVED | ||
| 6714 | IRQ request for Intel SoC DTS Thermal fails | normal | Medium | Q4 2014 | Marcel Holtmann | RESOLVED | ||
| 6715 | HID over I2C failure for i2c-MSFT0002:00 | normal | Medium | Production Release | Marcel Holtmann | RESOLVED | ||
| 6716 | ASPM gets disabled by kernel | normal | Medium | Production Release | Darren Hart | RESOLVED | ||
| 6717 | ACPI Exception while evaluating sleep state | normal | Medium | Production Release | He, Tim | RESOLVED | ||
| 6718 | Broadcom RFKILL switches are exposed | normal | Medium | Production Release | Marcel Holtmann | RESOLVED | ||
| 6719 | Gummiboot "Reboot Into Firmware Interface" does not work | normal | Medium | Production Release | John 'Warthog9' Hawley | RESOLVED | ||
| 6720 | Number of enumerated MMC/SDIO host controllers | normal | Medium | Future | Unassigned | RESOLVED | ||
| 6722 | Boot entry for partition not exposed | normal | Medium | Production Release | Darren Hart | RESOLVED | ||
| 6723 | hpet: number irqs doesn't agree with number of timers | normal | Medium | Production Release | Lu_Shifei | RESOLVED | ||
| 6725 | setup_efi_pci() failed! | normal | Medium | Production Release | Darren Hart | RESOLVED | ||
| 6727 | Feature request: provide an option to configure any of the HDR26 GPIO_S5[2:0] pins for wake | enhancement | Medium | Production Release | David Anders | RESOLVED | ||
| 6732 | USB 2.0 Network interface causes firmware to stall on boot | critical | Medium+ | Production Release | John 'Warthog9' Hawley | RESOLVED | ||
| 6746 | S3 issue - Yocto which is installed on SD card fails to execute shutdown/reboot command after S3 resume. | normal | Medium+ | 1.9 | California Sullivan | RESOLVED | ||
| 6777 | [FNC] Unable to set CONFIG_COMPAT=y to kernel config | major | Medium | 1.7 M4 | Darren Hart | RESOLVED | ||
| 6792 | Firmware and Device drivers should be tested for compatibility with D0 SoC stepping | normal | Medium | Production Release | Darren Hart | CLOSED | ||
| 6822 | Feature request: enhance I2C/SPI/GPIO connectivity through HDR26 pins. | enhancement | Medium | A2 Release | Ivan Rouzanov | CLOSED | ||
| 6865 | I2S support on LSE needs clock source | normal | Medium+ | A4 Release | David Anders | RESOLVED | ||
| 6866 | No GPIO controlled LED available | normal | Medium | A4 Release | David Anders | RESOLVED | ||
| 6867 | No GPIO controlled "Reset" Jumper | normal | Medium | A4 Release | David_Wei | RESOLVED | ||
| 6868 | Add support for 4gb DDR3 configuration | normal | Medium+ | A3 Release | David Anders | RESOLVED | ||
| 6869 | MinnowMax can not be powered via LSE | normal | Medium | A4 Release | David Anders | RESOLVED | ||
| 6927 | I2C Controller Intermittently Timeout and Lost Arbitration | major | Medium+ | A4 Release | David Anders | RESOLVED | ||
| 6987 | mPCI-E only seems to only recognize wifi cards | major | Medium | Production Release | David Anders | RESOLVED | ||
| 6989 | Error in Create-DevboardKey script, when trying to make a Win8.1 installation | major | Medium | Production Release | Ivan Rouzanov | CLOSED | ||
| 6993 | Linux 3.15+ w/ 0.74 or 0.75 firmware causes kernel panics | critical | High | Production Release | John 'Warthog9' Hawley | RESOLVED | ||
| 7027 | Connecting HDMI cable to the Minnowboard Max doesn't get the monitor ON | normal | Medium | A4 Release | David Anders | RESOLVED | ||
| 7079 | Add lures as components for Minnow-board-MAX | normal | Medium | Future | Michael Halstead | RESOLVED | ||
| 7109 | Is Minnowmax support Wake on Wireless Lan? | normal | Medium | Production Release | austin.zhang | RESOLVED | ||
| 7158 | BIOS date not configured with current date after flash | major | Medium | Production Release | Ivan Rouzanov | CLOSED | ||
| 7255 | The CPU is very hot if break into EFI shell | normal | Medium | Production Release | YONG LI | RESOLVED | ||
| 7266 | Quad Core(E3845) processor fails to boot due to memory init error | major | Medium+ | Production Release | David Anders | RESOLVED | ||
| 7311 | HDMI port cuts signal twice before UEFI starts | normal | Medium | Production Release | Ivan Rouzanov | CLOSED | ||
| 7396 | MBI should be removed from DSDT | normal | Medium | Production Release | Ivan Rouzanov | RESOLVED | ||
| 7438 | add support to enable secondary display interface on baytrail | normal | Medium+ | Production Release | David Anders | RESOLVED | ||
| 7471 | [MinnowBoard MAX] System fails to suspend twice in a row with i915 loaded | major | Medium+ | Future | Darren Hart | RESOLVED | 2 | |
| 7497 | Add "save" option back to the boot ordering screen | normal | Medium | Production Release | He, Tim | RESOLVED | ||
| 7525 | GPIO Wake should not program all GPIO pins for wake. | normal | Medium | Production Release | David_Wei | RESOLVED | ||
| 7572 | SOURCE_DEBUG_ENABLE fails on .76 MinnowMax | major | Medium | Production Release | RESOLVED | |||
| 7579 | GCC build results in larger images | normal | Low | Future | David_Wei | RESOLVED | ||
| 7682 | acpitz-virtual-0 thermal device always returns 26.8 deg C | normal | Medium | Production Release | Unassigned | RESOLVED | ||
| 7719 | HDMI not working with TFP-401 DVI based devices | major | Medium+ | A4 Release | David Anders | RESOLVED | ||
| 7770 | Errors found on dmesg MM 32 bits firmware for core-sato-sdk image | normal | Medium | 1.9 | California Sullivan | VERIFIED | ||
| 7793 | Errors found on dmesg MM 64 bits firmware for core-sato-sdk image | normal | Medium | Production Release | California Sullivan | RESOLVED | ||
| 7888 | stat command on permissions field has undefined output | normal | Medium | Future | Justin Brown | RESOLVED | ||
| 7897 | Dmesg error BAR 14 and BAR 15 failed to assign in Minnow Max | normal | Medium | 2.1 M3 | Saul Wold | RESOLVED | ||
| 7898 | Dmesg error controller can't do DEVSLP on Minnow Max | normal | Low | 1.9 | California Sullivan | VERIFIED | ||
| 7900 | Dmesg error failed to setup card detect gpio on Minnow Max | normal | Low | 2.2 | California Sullivan | RESOLVED | 3 | |
| 7901 | Dmesg error failed to retrieve link info, disabling eDP on Minnow Max | normal | Low | 1.9 | California Sullivan | VERIFIED | ||
| 8085 | Wifi card on Silverjaw lure fails after suspend/resume on Minnowboard Max | normal | Medium | Production Release | John 'Warthog9' Hawley | RESOLVED | ||
| 8473 | Parselogs error: Online check failed for 0xb77b2ab0 Wired on lsb image | normal | Medium | 2.1 | Saul Wold | VERIFIED | ||
| 8526 | Parselogs error: creating IPv4 interface lo failed; interface ignored | normal | Medium | 2.1 | Saul Wold | RESOLVED | ||
| 8689 | Parselogs error: can't open '/dev/ttyPCH0': No such file or directory^M in lsb image | normal | Medium | 2.1 | Cristina Agurida | VERIFIED | 3 | |
| 8972 | failed to add I2C device MSFT8000:00 from ACPI on MinnowBoard Max | normal | Undecided | --- | He, Tim | RESOLVED | ||
| 9062 | Firmware - Upgrade to UDK2015 | normal | Medium | Production Release | Mang Guo | RESOLVED | ||
| 9063 | Firmware - Support for Capsule update mechanism | normal | Medium | Production Release | Mike Wu | RESOLVED | ||
| 9186 | test_parselogs (oeqa.runtime.parselogs.ParseLogsTest) failed on testimage lsb and sdk | normal | Undecided | --- | Saul Wold | RESOLVED | ||
| 9254 | Mismatch between genericx86 and genericx86-64 keyboards | normal | Medium | 2.1 M4 | Saul Wold | RESOLVED | ||
| 9271 | dmi firmware registration failed, ioremap error on 32 bit MinnowBoard | minor | Medium | 2.2 | California Sullivan | RESOLVED | 3 | |
| 9378 | Running testimage test_cvs failed oeqa.runtime.buildcvs.BuildCvsTest | normal | Undecided | 2.1 M4 | Alexandru Georgescu | RESOLVED | ||
| 9386 | Missing 3 steps in quick start in building for Minnowboard max | normal | Undecided | 2.1 M4 | Scott Rifenbark | RESOLVED | 05 April 2016: RESOLVED | 1 |
| 9393 | When running testimage test_xorg_running failed getting the following error message Xorg does not appear to be running | normal | Medium+ | 2.1 M4 | Aníbal Limón | RESOLVED | ||
| 9405 | running testimage dmesg test_parseLogs failed | normal | Medium | 2.2 | Saul Wold | RESOLVED | ||
| 9434 | Running testimage test_parselogs failed getting the following error message failed to retrieve link info, disabling eDP on Minnowboard Max 32 and 64 | normal | Undecided | 2.2 | California Sullivan | RESOLVED | ||
| 9462 | Boot and install from USB failed getting a xhci_hcd error after booting kernel panic is displayed | major | Medium | 2.2 | California Sullivan | RESOLVED | 3 | |
| 9465 | Testimage dmesg test_parseLogs drm failed to retrieve info, disabling eDP (WIC) | normal | Undecided | --- | Saul Wold | RESOLVED | ||
| 9860 | LAN device doesn't retrieve connection after resume from suspend state | normal | Medium+ | 2.2 M3 | David Rodriguez | VERIFIED | ||
| 10021 | testimage test_parselogs WIC image failed for dmi firmware registration, ioremap error, | normal | Undecided | 2.2 | California Sullivan | RESOLVED | ||
| 10219 | MinnowBoard MAX 0.93 64-Bit & network lost | major | Medium | Production Release | He, Tim | RESOLVED | ||
| 10262 | SD card not being recognized when trying to install the image | normal | Medium+ | 2.2 M4 | Alejandro Hernandez | VERIFIED | YP 2.2 M4 RC1 BUILD BLOCKING BUG | |
| 10269 | Ethernet is not working | normal | Undecided | 2.2 M3 | Francisco Pedraza | RESOLVED | ||
| 10390 | Network interface eth0 not showing up on intel-core2-32 | major | Undecided | --- | Alejandro Hernandez | RESOLVED | ||
| 10500 | Benchmark meta-intel build VS generic-x86* build in OE | normal | Medium+ | 2.3 M2 | Todor Minchev | RESOLVED | 4 | |
| 10514 | test_parselogs on genericx86-lsb minnow board max 32 FAILED LOGIN (1) on '/dev/tty1' FOR 'UNKNOWN', Authentication failure | normal | Medium | 2.3 | David Lopez Barriba | VERIFIED | possible 2.2.1 | |
| 11341 | Systemctl fails to rename usb network interfaces | normal | Medium | 2.4 M1 | Dmitry Rozhkov | RESOLVED | ||
| 11476 | Nftables firewall support | enhancement | Medium | 2.4 M1 | Ismo Puustinen | RESOLVED | ||
| 11879 | Testimage: multiple "uvesafb" errors present in log in minnowmax on genericx86/genericx86-64 | normal | Medium+ | 2.4 M4 | Alejandro Hernandez | RESOLVED | 3 | |
| 11985 | Refkit wayland image: failed to return into virtual terminal after terminate wayland (ctrl+alt+backspace) | normal | Undecided | Future | Jussi Laako | RESOLVED | ||
| 11986 | Refkit wayland image: click on weston-terminal icon does not fire up new terminal | normal | Undecided | Future | Jussi Laako | RESOLVED | ||
| 11987 | Refkit X11 image: select the "Exit" in twm does not terminate X11 fully | normal | Undecided | Future | Jussi Laako | RESOLVED | ||
| 12213 | [TC 1059] test_parselogs failed on MMAX64 (Turbot) with direct firmware load for rtl_nic/rtl8168g-2.fw error | normal | Medium | 2.5 | California Sullivan | VERIFIED | ||
| 12214 | [TC 1059] [test_parselogs] failed on MMAX64 (Turbot, WIC image) : usb 1-3: device descriptor read/64, error -71 | normal | Medium | 4.99 | nagarajagopal | RESOLVED | ||
| 12444 | [Test Case 1542] test_2_logrotate fails in MinnowMax with core-image-lsb-sdk-genericx86-64 image | normal | Medium+ | 2.5 M2 | yeoh ee peng | RESOLVED | ||
| 12536 | [Meta-Intel 2.5 M1 RC1] Unable to boot up Minnowboard with core-image-sato-sdk-intel-core2-32 | normal | Medium+ | 2.5 M1 | California Sullivan | RESOLVED | ||
| 141 |
