Qemumips-ltp

From Yocto Project
Revision as of 15:54, 10 March 2011 by Jiajun (talk | contribs)
Jump to navigationJump to search

1.0/M4 -RC1

total: 27

  • NEW Introduced:
  • LTP: 1
  • NAB: 1
  • Fixed: 0
  • Duplicated: 35
  • pending: 0
  • not started: 0
  • Disappear without fixing patch: 2(shmem_test_05, tar)

similarity: 29 (78.00%):

       chdir01A fallocate01 fallocate02 fallocate03 splice02 utimensat01 shmem_test_05 hackbench01 
LTP cases status owner error msg lsb comment bugzilla
fallocate01 Qemuarm n/a n/a n/a n/a n/a
fallocate02 Qemuarm n/a n/a n/a n/a n/a
fallocate03 Qemuarm n/a n/a n/a n/a n/a
lchown02 qemux86 n/a n/a n/a n/a n/a
lchown02_16 qemux86 n/a n/a n/a n/a n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a n/a n/a n/a n/a
mtest06_2 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a


1.0/M2

total: 37 (100% audited)

  • LTP: 1
  • NAB: 1
  • Fixed: 0
  • Duplicated: 35
  • pending: 0
  • not started: 0

similarity: 29 (78.00%):

       chdir01A fallocate01 fallocate02 fallocate03 splice02 utimensat01 shmem_test_05 hackbench01 
LTP cases status owner error msg lsb comment bugzilla
shmem_test_05 LTP Kevin Tian ERROR [line: 222] shmat failed: Invalid argument n/a shmem_test_05 attaches to a piece of shm on a set of fixed addresses among (0x30000000-0x32000000).

Actually this is a bogus test as we don't know which address segments have been occupied already. In this specific case, there're quite a few segments occupied by ld.so and libc.so within that range, and thus -EINVAL is returned.

This doesn't happen on other archs just because they happen to not have that range occupied.

n/a
splice02 NAB Kevin Tian splice failed - errno = 28 : No space left on device n/a this is because no "-d tmpdir" specified when running this test, while standard /dev/hda only have limited space
utimensat01 Qemuarm n/a n/a n/a n/a n/a
hackbench01 Qemuarm n/a n/a n/a n/a n/a
chdir01A Qemuarm n/a n/a n/a n/a n/a
fallocate01 Qemuarm n/a n/a n/a n/a n/a
fallocate02 Qemuarm n/a n/a n/a n/a n/a
fallocate03 Qemuarm n/a n/a n/a n/a n/a
lchown02 qemux86 n/a n/a n/a n/a n/a
lchown02_16 qemux86 n/a n/a n/a n/a n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a n/a n/a n/a n/a
mtest06_2 qemux86 n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld qemux86 n/a n/a n/a n/a n/a
ldd qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
tar qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a