Qemumips-ltp

1.0/M4 -RC2

total: 27

• NEW Introduced: 0

• LTP: 0

• NAB: 0

• Fixed: 0

• Duplicated: 27

• pending: 0

• not started: 0

• Disappear without fixing patch: 2(shmem_test_05, tar)

similarity: 27 (100.00%):

1.0/M4 -RC1

total: 27

• NEW Introduced: 0

• LTP: 0

• NAB: 0

• Fixed: 0

• Duplicated: 27

• pending: 0

• not started: 0

• Disappear without fixing patch: 2(shmem_test_05, tar)

similarity: 27 (100.00%):

LTP cases	status	owner	error msg	lsb	comment	bugzilla
fallocate01	Qemuarm	n/a	n/a	n/a	n/a	n/a
fallocate02	Qemuarm	n/a	n/a	n/a	n/a	n/a
fallocate03	Qemuarm	n/a	n/a	n/a	n/a	n/a
lchown02	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02_16	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.0/M2

total: 37 (100% audited)

• LTP: 1

• NAB: 1

• Fixed: 0

• Duplicated: 35

• pending: 0

• not started: 0

similarity: 29 (78.00%):

       chdir01A fallocate01 fallocate02 fallocate03 splice02 utimensat01 shmem_test_05 hackbench01 

LTP cases	status	owner	error msg	lsb	comment	bugzilla
shmem_test_05	LTP	Kevin Tian	ERROR [line: 222] shmat failed: Invalid argument	n/a	shmem_test_05 attaches to a piece of shm on a set of fixed addresses among (0x30000000-0x32000000). Actually this is a bogus test as we don't know which address segments have been occupied already. In this specific case, there're quite a few segments occupied by ld.so and libc.so within that range, and thus -EINVAL is returned. This doesn't happen on other archs just because they happen to not have that range occupied.	n/a
splice02	NAB	Kevin Tian	splice failed - errno = 28 : No space left on device	n/a	this is because no "-d tmpdir" specified when running this test, while standard /dev/hda only have limited space
utimensat01	Qemuarm	n/a	n/a	n/a	n/a	n/a
hackbench01	Qemuarm	n/a	n/a	n/a	n/a	n/a
chdir01A	Qemuarm	n/a	n/a	n/a	n/a	n/a
fallocate01	Qemuarm	n/a	n/a	n/a	n/a	n/a
fallocate02	Qemuarm	n/a	n/a	n/a	n/a	n/a
fallocate03	Qemuarm	n/a	n/a	n/a	n/a	n/a
lchown02	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02_16	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	qemux86	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	qemux86	n/a	n/a	n/a	n/a	n/a
ldd	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
tar	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a