Obsolete - AutobuilderSetup: Difference between revisions

From Yocto Project
Jump to navigationJump to search
(Quick checklist for making buildslaves)
 
m (Michael Opdenacker moved page AutobuilderSetup to Obsolete - AutobuilderSetup: Obsolete page - Contents cleared - Can be removed)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
== Checklist for setting up autobuilders ==
Obsolete page - Contents cleared - Can be removed
 
# Fresh OS install (minimal X window profile)
# Make sure NFS is mounted and idmapd is working properly.
# Set firewall to allow connections from qemu sanity tests
# Setup any needed proxies.
## Including git-proxy if needed. You'll test your proxies below.
# Run [https://www.yoctoproject.org/docs/current/yocto-project-qs/yocto-project-qs.html relevant yum, apt-get, or zypper command from the packages section of the quick start guidde]
# Install vncserver and if needed python-zope.interfaces
# Add a pokybuild user
# echo "source /opt/poky/1.5/environment-setup-x86_64-pokysdk-linux" >> /home/pokybuild/.bashrc
# git clone http://git.yoctoproject.org/git/yocto-autobuilder /home/pokybuild/yocto-autobuilder
# git clone git clone git://git.yoctoproject.org/poky /root/poky
# Install a [http://downloads.yoctoproject.org/releases/yocto/yocto-1.5.1/toolchain/x86_64/poky-eglibc-x86_64-core-image-sato-x86_64-toolchain-1.5.1.sh toolchain] at /opt/poky
# Install an [http://downloads.yoctoproject.org/releases/yocto/yocto-1.5.1/buildtools/poky-eglibc-x86_64-buildtools-tarball-i586-buildtools-nativesdk-standalone-1.5.sh SDK] at the default /opt/poky/1.5
# echo "cd /root/poky/scripts/; ./runqemu-gen-tapdevs 1006 100 32 /opt/poky/sysroots/x86_64-pokysdk-linux/" >> /etc/rc.local (or /etc/rc.d/after.local or equivalent.)
# echo "/bin/su - pokybuild -c "/usr/bin/vncserver" >> /etc/rc.local (or /etc/rc.d/after.local or equivalent.)
# Execute /etc/rc.local file to test it. Set your vnc server password
# su - pokybuild
# Run which python and make sure your python is in /opt
# cd yocto-autobuilder and configure config/autobuilder.conf yocto-slave/buildbot.tac yocto-master/master.cfg (maybe yocto-slave/twistd.hostname)
# dot-source: ". yocto-autobuilder-setup" (touch .setupdone if needed)
# ./yocto-start-autobuilder slave
 
Watch /tmp on the first build and make sure it isn't filling up. Missed configuration changes with default to /tmp.

Latest revision as of 18:31, 14 January 2022

Obsolete page - Contents cleared - Can be removed