Linux Kernel/Boot Time

Vision

Provide an example layer which demonstrates how to minimize the boot-time of the Intel N-450 Development platform. Using a core-image-minimal image, boot to a login prompt in 2.0 seconds.

Design

The current linux-yocto kernel configuration does not focus on minimal boot time. Eliminating unnecessary Linux kernel config options will reduce the image size as well as the boot time. Various boot parameters can also have a significant impact. Identify specific items through exploration of:

• linux/scripts/bootgraph.pl
• comparison with MeeGo .config
• discussions with MeeGo leads
• survey of talks and papers on the subject
• research coreboot and other BIOS replacements for the N450

The boot process should look like the following:

BIOS -> Loader -> Kernel -> Userspace -> basic init -> start apps -> module load

The boot-time budget follows:

• BIOS: 0.5s
  • Assuming a BLDK or other custom fast-boot BIOS
• Kernel + Modules: 1s
• Init to prompt: 0.5s

Next Steps

• what runs before start @ 0.38s
• e100_init_module (0.4s)
• [23]_async_port_probe (0.8s-1.3s)
• alsa_card_azx_init (0.4s)
• serial8250* (0.4s)
• Current total: 2.6s (2.2s without async_port)
• Possibly M3 work
  • udev audit
  • hardcode required /dev/* nodes
  • remove unnecessary configurations from udev (SCSI, IB, etc.)
  • start udev early, but delay the event handler and settling until after boot

Resources

• Boot Time Layer
• ELC 2010: The Right Approach to Minimal Boot Times
• http://elinux.org/Boot_Time

Journal

Bootgraph Results

Initial State: 2.6.34 (UP), USB

• Yocto 1.0
• Intel N-450
• USB flash boot media
• linux-yocto 2.6.34
• Total boot time: 28.72s
  • Some 15 seconds is due to the default BIOS
• Bootgraph logged 12s

2.6.34 (SMT), SSD

• Yocto 1.0
• Intel N-450
• SATA SSD boot media
• linux-yocto 2.6.34 w/ SMT
• Bootgraph logged 6.32s
  • SSD saves some 6 seconds

2.6.34 (SMT), SSD, NOKMS

• Yocto 1.0
• Intel N-450
• SATA SSD boot media
• Boot parameters: i915.modeset=0
• linux-yocto 2.6.34 w/ SMT
• Bootgraph logged 3.98s
  • NOKMS saves some 2.36s

2.6.37 (SMT), SSD, NOKMS

• Yocto 1.0+
• Intel N-450
• SATA SSD boot media
• Boot parameters: i915.modeset=0
• Bootgraph logged 4.05s

2.6.37 (SMT), SSD, NOKMS, No Serial

• Yocto 1.0+
• Intel N-450
• SATA SSD boot media
• Boot parameters: i915.modeset=0 console=tty0
  • All others also have console=ttyS0,115200
• Bootgraph logged 2.39s
  • no serial saves 1.66s

Notes

Discussion w/ Arjan

• Establish a budget
• Things to look at first
  • boot media
    • use SSD or MMC over Standard IO
    • avoid USB and spinning media
  • SATA
    • restrict ports to those being used
  • Kernel Mode Switching (KMS)
  • Eliminate UDEV