Buildhistory: Difference between revisions

From Yocto Project
Jump to navigationJump to search
No edit summary
(Remove most of the content and point to updated version in the reference manual)
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
When upgrading a recipe to a new version of an upstream software package, or trying out new configuration options, subtle changes can occur in the output that may not be noticed until later. For example, a new version of a piece of software might introduce an optional dependency on another library which is autodected; if that library has already been built when the software is building, then the software will link to that library and it will now be pulled into your image with the software even if you didn't want it.  
Content previously on this page has been expanded and added as Yocto Project Reference Manual section on [http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#maintaining-build-output-quality Maintaining Build Output Quality].


The buildhistory class was created to highlight unexpected and possibly unwanted changes such as these in the build system output. It will record information about the contents of each package (e.g. size, dependencies, list of files) and image (e.g. packages and files in the image), and commit it to a git repository so you can see when something changes.
== Example repositories ==


== Enabling buildhistory ==
History data from buildhistory is already being collected from various autobuilders and published:


Buildhistory is off by default. To enable it, add the following to the end of your <tt>conf/local.conf</tt>:
* [http://github.com/Angstrom-distribution/buildhistory Angstrom]
 
* [http://git.yoctoproject.org/cgit/cgit.cgi/poky-buildhistory/ Poky]
INHERIT += "buildhistory"
* [http://git.shr-project.org/git/?p=buildhistory.git;a=summary SHR]
BUILDHISTORY_COMMIT = "1"
 
This will enable collection of the build output information as well as committing it to a local git repository.
 
Note that enabling buildhistory will increase your build times slightly (particularly for images) and will use up extra disk space.
 
== Viewing the output ==
 
The default output directory is $TMPDIR/buildhistory.
 
An example (abbreviated) listing:
 
buildhistory/
|-- images
|  `-- atom_pc
|      `-- eglibc
|          `-- core-image-minimal
|              |-- build-id
|              |-- depends.dot
|              |-- depends-nokernel.dot
|              |-- depends-nokernel-nolibc.dot
|              |-- depends-nokernel-nolibc-noupdate.dot
|              |-- depends-nokernel-nolibc-noupdate-nomodules.dot
|              |-- files-in-image.txt
|              |-- image-info.txt
|              |-- installed-package-names.txt
|              |-- installed-package-sizes.txt
|              `-- installed-packages.txt
`-- packages
    `-- core2-poky-linux
        `-- busybox
            |-- busybox
            |  `-- latest
            |-- busybox-dbg
            |  `-- latest
            |-- busybox-dev
            |  `-- latest
            |-- busybox-doc
            |  `-- latest
            |-- busybox-httpd
            |  `-- latest
            |-- busybox-locale
            |  `-- latest
            |-- busybox-mdev
            |  `-- latest
            |-- busybox-staticdev
            |  `-- latest
            |-- busybox-syslog
            |  `-- latest
            |-- busybox-udhcpc
            |  `-- latest
            |-- busybox-udhcpd
            |  `-- latest
            `-- latest
 
=== Package information ===
 
For each package there is a text file containing name-value pairs with information about the package. For example, <tt>buildhistory/packages/core2-poky-linux/busybox/busybox/latest</tt> contains the following:
 
PV = 1.19.3
PR = r3
RDEPENDS = update-rc.d eglibc (>= 2.13)
RRECOMMENDS = busybox-syslog busybox-udhcpc
PKGSIZE = 564701
FILES = /usr/bin/* /usr/sbin/* /usr/libexec/* /usr/lib/lib*.so.* /etc /com /var /bin/* /sbin/* /lib/*.so.* /usr/share/busybox /usr/lib/busybox/* /usr/share/pixmaps /usr/share/applications /usr/share/idl /usr/share/omf /usr/share/sounds /usr/lib/bonobo/servers
FILELIST = /etc/busybox.links /etc/init.d/hwclock.sh /bin/busybox /bin/sh
 
Most of these name/values correspond to variables used to produce the package, except for FILELIST (the actual list of files in the package) and PKGSIZE (the total size of files in the package, in bytes).
 
There is also a file corresponding to the recipe from which the package came, for example <tt>buildhistory/packages/core2-poky-linux/busybox/latest</tt>:
 
PV = 1.19.3
PR = r3
DEPENDS = virtual/i586-poky-linux-gcc virtual/i586-poky-linux-compilerlibs virtual/libc update-rc.d-native
PACKAGES = busybox-httpd busybox-udhcpd busybox-udhcpc busybox-syslog busybox-mdev busybox-dbg busybox busybox-doc busybox-dev busybox-staticdev busybox-locale
 
=== Image information ===
 
The files produced for each image are as follows:
 
{| class="wikitable" border="2"
|| '''File''' || '''Purpose'''
|-
||build-id||Human-readable information about the build configuration and metadata source revisions
|-
||*.dot||graphviz-compatible dependency graphs for the image
|-
||files-in-image.txt||A list of files in the image with permissions, owner/group, size, and symlink information.
|-
||image-info.txt||A text file containing name-value pairs with information about the image (see below)
|-
||installed-package-names.txt||A list of installed packages (names only)
|-
||installed-package-sizes.txt||A list of installed packages ordered by size
|-
||installed-packages.txt||A list of installled packages (full package filename)
|}
 
An example image-info.txt:
 
DISTRO = poky
DISTRO_VERSION = 1.1+snapshot-20120207
USER_CLASSES = image-mklibs image-prelink
IMAGE_CLASSES = image_types
IMAGE_FEATURES = debug-tweaks x11-base apps-x11-core package-management ssh-server-dropbear package-management
IMAGE_LINGUAS = en-us en-gb
IMAGE_INSTALL = task-core-boot task-base-extended
BAD_RECOMMENDATIONS =
ROOTFS_POSTPROCESS_COMMAND = buildhistory_get_image_installed ;  rootfs_update_timestamp ; 
IMAGE_POSTPROCESS_COMMAND = buildhistory_get_imageinfo ;
IMAGESIZE = 171816
 
Other than IMAGESIZE (the total size of the files in the image in KiB) the name/value pairs are variables that may have influenced the content of the image. These are often useful when you are trying to determine why a change in the package/file listings has occurred.
 
== Analysing changes ==
 
To see any changes that have occurred (assuming you have <tt>BUILDHISTORY_COMMIT = "1"</tt>) you can simply use <tt>git log -p</tt> or some other method of viewing the git history, however this will show changes that aren't significant e.g. a package changing in size by a few bytes. However, there is a command-line tool called <tt>buildhistory-diff</tt> which will query the git repository and print just the differences that might be significant in human-readable form. For example:
 
paul@helios:~/poky/poky/build/tmp/buildhistory$ ~/poky/poky/scripts/buildhistory-diff . HEAD^
Changes to images/qemux86_64/eglibc/core-image-minimal (files-in-image.txt):
  /etc/anotherpkg.conf was added
  /sbin/anotherpkg was added
  * (installed-package-names.txt):
  *  anotherpkg was added
Changes to images/qemux86_64/eglibc/core-image-minimal (installed-package-names.txt):
  anotherpkg was added
packages/qemux86_64-poky-linux/v86d: PACKAGES: added "v86d-extras"
  * PR changed from "r0" to "r1"
  * PV changed from "0.1.10" to "0.1.12"
packages/qemux86_64-poky-linux/v86d/v86d: PKGSIZE changed from 110579 to 144381 (+30%)
  * PR changed from "r0" to "r1"
  * PV changed from "0.1.10" to "0.1.12"

Latest revision as of 11:05, 18 July 2013

Content previously on this page has been expanded and added as Yocto Project Reference Manual section on Maintaining Build Output Quality.

Example repositories

History data from buildhistory is already being collected from various autobuilders and published: