Qemumips-ltp
1.1/M1
total: 57 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
chmod01 | NEW | chmod01 6 TFAIL : testfile: Incorrect modes 0777, Expected 02777
chmod01 7 TFAIL : testfile: Incorrect modes 0777, Expected 04777 chmod01 8 TFAIL : testfile: Incorrect modes 0777, Expected 06777 |
n/a | n/a | ||
shmem_test_05 | LTP | Kevin Tian | ERROR [line: 222] shmat failed: Invalid argument | n/a | shmem_test_05 attaches to a piece of shm on a set of fixed addresses among (0x30000000-0x32000000).
Actually this is a bogus test as we don't know which address segments have been occupied already. In this specific case, there're quite a few segments occupied by ld.so and libc.so within that range, and thus -EINVAL is returned. This doesn't happen on other archs just because they happen to not have that range occupied. |
n/a |
splice02 | NAB | Kevin Tian | splice failed - errno = 28 : No space left on device | n/a | this is because no "-d tmpdir" specified when running this test, while standard /dev/hda only have limited space | |
utimensat01 | Qemuarm | n/a | n/a | n/a | n/a | n/a |
hackbench01 | Qemuarm | n/a | n/a | n/a | n/a | n/a |
chdir01A | Qemuarm | n/a | n/a | n/a | n/a | n/a |
fallocate01 | Qemuarm | n/a | n/a | n/a | n/a | n/a |
fallocate02 | Qemuarm | n/a | n/a | n/a | n/a | n/a |
fallocate03 | Qemuarm | n/a | n/a | n/a | n/a | n/a |
lchown02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
lchown02_16 | qemux86 | n/a | n/a | n/a | n/a | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.0/M4 -RC2
total: 27
- NEW Introduced: 0
- LTP: 0
- NAB: 0
- Fixed: 0
- Duplicated: 27
- pending: 0
- not started: 0
- Disappear without fixing patch: 2(shmem_test_05, tar)
similarity: 27 (100.00%):
1.0/M4 -RC1
total: 27
- NEW Introduced: 0
- LTP: 0
- NAB: 0
- Fixed: 0
- Duplicated: 27
- pending: 0
- not started: 0
- Disappear without fixing patch: 2(shmem_test_05, tar)
similarity: 27 (100.00%):
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
fallocate01 | Qemuarm | n/a | n/a | n/a | n/a | n/a |
fallocate02 | Qemuarm | n/a | n/a | n/a | n/a | n/a |
fallocate03 | Qemuarm | n/a | n/a | n/a | n/a | n/a |
lchown02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
lchown02_16 | qemux86 | n/a | n/a | n/a | n/a | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.0/M2
total: 37 (100% audited)
- LTP: 1
- NAB: 1
- Fixed: 0
- Duplicated: 35
- pending: 0
- not started: 0
similarity: 29 (78.00%):
chdir01A fallocate01 fallocate02 fallocate03 splice02 utimensat01 shmem_test_05 hackbench01
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
shmem_test_05 | LTP | Kevin Tian | ERROR [line: 222] shmat failed: Invalid argument | n/a | shmem_test_05 attaches to a piece of shm on a set of fixed addresses among (0x30000000-0x32000000).
Actually this is a bogus test as we don't know which address segments have been occupied already. In this specific case, there're quite a few segments occupied by ld.so and libc.so within that range, and thus -EINVAL is returned. This doesn't happen on other archs just because they happen to not have that range occupied. |
n/a |
splice02 | NAB | Kevin Tian | splice failed - errno = 28 : No space left on device | n/a | this is because no "-d tmpdir" specified when running this test, while standard /dev/hda only have limited space | |
utimensat01 | Qemuarm | n/a | n/a | n/a | n/a | n/a |
hackbench01 | Qemuarm | n/a | n/a | n/a | n/a | n/a |
chdir01A | Qemuarm | n/a | n/a | n/a | n/a | n/a |
fallocate01 | Qemuarm | n/a | n/a | n/a | n/a | n/a |
fallocate02 | Qemuarm | n/a | n/a | n/a | n/a | n/a |
fallocate03 | Qemuarm | n/a | n/a | n/a | n/a | n/a |
lchown02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
lchown02_16 | qemux86 | n/a | n/a | n/a | n/a | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | qemux86 | n/a | n/a | n/a | n/a | n/a |
ldd | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
tar | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |