Mpc8315e-rdb-ltp

1.6 M3 RC1 20140213 build

total: 36

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. MPC8315e-rdb has 128M memory.	n/a
fanotify01	NAB	n/a	fanotify01 1 TCONF  : fanotify is not configured in this kernel.	n/a		n/a
fanotify02	NAB	n/a	fanotify02 1 TCONF  : fanotify is not configured in this kernel.	n/a		n/a
fanotify04	NAB	n/a	fanotify04 1 TCONF  : fanotify is not configured in this kernel.	n/a		n/a
readahead02	NAB	n/a	readahead02 0 TWARN  : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02	LTP	n/a	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	n/a	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);	n/a
setregid02	LTP	n/a	setregid02 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success	n/a		n/a
setregid02_16	LTP	n/a	setregid02_16 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success	n/a		n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest05		n/a	mmstress 0 TINFO  : test1: Test case tests the race condition between simultaneous read faults in the same address space.map_and_thread(): write(): Bad address	n/a		n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb has 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.6 M2 RC1 20140114 build

total: 30

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. MPC8315e-rdb have 128M memory.	n/a
readahead02	NAB	n/a	readahead02 0 TWARN  : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02	LTP	n/a	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	n/a	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.6 M1 RC1 20131203 build

total: 30

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. MPC8315e-rdb have 128M memory.	n/a
readahead02	NAB	n/a	readahead02 0 TWARN  : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02	LTP	n/a	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	n/a	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.5.1 RC2 20131213 build

total: 29

LTP cases	status	owner	error msg	lsb	comment	bugzilla
proc01	LTP	n/a	proc01 2 TFAIL  : readproc() failed with 1 errors.	n/a	LTP bug for kernel 3.10	n/a
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mount02	NAB	n/a	mount02 4 TBROK  : umount of mnt_22014 failed: errno=EBUSY(16): Device or resource busy	n/a		n/a
mount03	LTP	n/a	mount03 1 TBROK  : stat for setuid_test failed	n/a	It is a LTP testcase bug. Already fixed in upstream.	n/a
readahead02	NAB	n/a	readahead02 0 TWARN  : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02	LTP	n/a	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	n/a	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.5 M5 RC6 build

total: 28

LTP cases	status	owner	error msg	lsb	comment	bugzilla
proc01	LTP	n/a	proc01 2 TFAIL  : readproc() failed with 1 errors.	n/a	LTP bug for kernel 3.10	n/a
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mount02	NAB	n/a	mount02 4 TBROK  : umount of mnt_22014 failed: errno=EBUSY(16): Device or resource busy	n/a		n/a
mount03	LTP	n/a	mount03 1 TBROK  : stat for setuid_test failed	n/a	It is a LTP testcase bug. Already fixed in upstream.	n/a
readahead02	NAB	n/a	readahead02 0 TWARN  : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02	LTP	n/a	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	n/a	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.5 M4 RC3 build

total: 25

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mount02	NAB	n/a	mount02 4 TBROK  : umount of mnt_22014 failed: errno=EBUSY(16): Device or resource busy	n/a		n/a
mount03		n/a	mount03 1 TBROK  : stat for setuid_test failed	n/a		n/a
readahead02	NAB	n/a	readahead02 0 TWARN  : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02		n/a		n/a		n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.5 M4 RC2 build

total: 25

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mount02	NAB	n/a	mount02 4 TBROK  : umount of mnt_22014 failed: errno=EBUSY(16): Device or resource busy	n/a		n/a
mount03		n/a	mount03 1 TBROK  : stat for setuid_test failed	n/a		n/a
readahead02	NAB	n/a	readahead02 0 TWARN  : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02		n/a		n/a		n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.5 M2 RC1 20130703 build

total: 25

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mount02	NAB	n/a	mount02 4 TBROK  : umount of mnt_22014 failed: errno=EBUSY(16): Device or resource busy	n/a		n/a
mount03		n/a	mount03 1 TBROK  : stat for setuid_test failed	n/a		n/a
readahead02	NAB	n/a	readahead02 0 TWARN  : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02		n/a		n/a		n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.4.1 RC1 20130612 build

total: 19

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.5 20130604 build

total: 23

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
readahead02	NAB	n/a	readahead02 0 TWARN  : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3.2 20130516 build

total: 18

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.4 M6 RC2 20130418 build

total: 19

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.4 M5 RC3 20130403 build

total: 21

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.4 M5 RC2 20130327 build

total: 19 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.4 M4 RC1 20130220 build

total: 19 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.4 M3 RC2 20130131 build

total: 23 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.4 M3 RC1 20130122 build

total: 22 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.4 M1 RC1 20121128 build

total: 18 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2.2 20121018 build

total: 21 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
process_vm_readv01	NAB	n/a	process_vm_readv 29 TFAIL  : unexpected failure - expected = 14 : Bad address, actual: TEST_ERRNO=???(38): Function not implemented	n/a	Kernel doesn't support	n/a
process_vm_writev01	NAB	n/a	process_vm_writev 29 TFAIL  : unexpected failure - expected = 14 : Bad address, actual: TEST_ERRNO=???(38): Function not implemented	n/a	Kernel doesn't support	n/a
ksm05	LTP	n/a	ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M5 RC4 20121010 build

total: 18 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M5 RC3 20121003 build

total: 18 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M4 RC3 20120916 build

total: 20 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
get_robust_list01	LTP	n/a	get_robust_list01 4 TFAIL  : get_robust_list succeeded unexpectedly	n/a	It is a LTP bug. Wait for upstream	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M3 RC2 20120814 build

total: 21 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
get_robust_list01	LTP	n/a	get_robust_list01 4 TFAIL  : get_robust_list succeeded unexpectedly	n/a	It is a LTP bug. Wait for upstream	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
proc01	LTP	n/a	proc01 1 TFAIL  : read failed: /proc/sys/kernel/ftrace_enabled: errno=ENODEV(19): No such device	n/a	This is a LTP bug	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 20120801 build

total: 24 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
get_robust_list01	LTP	n/a	get_robust_list01 4 TFAIL  : get_robust_list succeeded unexpectedly	n/a	It is a LTP bug. Wait for upstream	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
proc01	LTP	n/a	proc01 1 TFAIL  : read failed: /proc/sys/kernel/ftrace_enabled: errno=ENODEV(19): No such device	n/a	This is a LTP bug	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1.2 20120630 build

total: 29 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
readlink03	LTP	n/a	readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22	n/a	This is a LTP bug. Has been fixed in upstream.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2.1 20120629 build

total: 22 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
dio24	NEW	n/a	diotest05 3 TFAIL  : readv/writev comparision failed	n/a	It could pass when run again	n/a
setxattr03	NAB	n/a	setxattr03 0 TWARN  : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument setxattr03 0 TWARN  : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument	n/a	No xattr support in fs or fs mounted without user_xattr option	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M1 RC1 20120613 build

total: 30 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
get_robust_list01	LTP	n/a	get_robust_list01 4 TFAIL  : get_robust_list succeeded unexpectedly	n/a	It is a LTP bug. Wait for upstream	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	mmap1 caught unexpected signal - 11 --- exiting	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 20120606 build

total: 29 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	mmap1 caught unexpected signal - 11 --- exiting	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 RC5 Denzil

total: 21 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
setxattr03	NAB	n/a	setxattr03 0 TWARN  : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument setxattr03 0 TWARN  : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument	n/a	No xattr support in fs or fs mounted without user_xattr option	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 RC4 Denzil

total: 23 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
sendfile02	NAB	n/a	sendfile02 2 TBROK  : call to bind() failed: Address already in use	n/a	It is not a bug.	n/a
setxattr03	NAB	n/a	setxattr03 0 TWARN  : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument setxattr03 0 TWARN  : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument	n/a	No xattr support in fs or fs mounted without user_xattr option	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
ksm05	LTP	n/a	ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M4 RC3

total: 21 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
setxattr03	NAB	n/a	setxattr03 0 TWARN  : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument setxattr03 0 TWARN  : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument	n/a	No xattr support in fs or fs mounted without user_xattr option	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M4 RC2

total: 20 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
readlink03	LTP	n/a	readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22	n/a	This is a LTP bug. Has been fixed in upstream.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
sched_getaffinity01			sched_getaffinity01 4 TFAIL  : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success	n/a		n/a
vma01		n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M4 RC1

total: 20 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
readlink03	LTP	n/a	readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22	n/a	This is a LTP bug. Has been fixed in upstream.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
ksm05	LTP	n/a	ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
vma01		n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M3 RC1

total: 20 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
readlink03	LTP	n/a	readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22	n/a	This is a LTP bug. Has been fixed in upstream.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
ksm05	LTP	n/a	ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
vma01		n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1.1

total: 41 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
fork13			fork13 1 TFAIL  : Wait return value: expected pid=9129, got 22911, iteration 998600.	n/a		n/a
sched_getaffinity01			sched_getaffinity01 4 TFAIL  : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success	n/a		n/a
clock_settime03	LTP		clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01	LTP		proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	/proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0	n/a
readlink03	LTP		readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap11	LTP		mmap11 0 TINFO  : [471] mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M2 RC1

total: 31 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
nm	NEW		-------System test for nm command------ nm: nmfile1.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm -A: FAIL	n/a		n/a
ldd	NEW		/usr/lib/gcc/powerpc-poky-linux/4.6.3/../../../crt1.o:(.rodata+0x4): undefined reference to `main' collect2: ld returned 1 exit status ASSERTION 1 ldd: /tmp/ldd01-23462/a.out: No such file or directory ASSERTION #1 FAIL	n/a		n/a
vma01			vma01 0 TINFO  : t = 0x40002000 vma01 0 TINFO  : v = 0x40103000 u = 0x40005000 vma01 0 TINFO  : s = 0x40005000, t = 0x40008000 vma01 1 TBROK  : no matched s = 0x40008000 found. vma01 2 TBROK  : Remaining cases broken vma01 0 TINFO  : t = 0x40002000 vma01 0 TINFO  : v = 0x40103000 vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		n/a
getrusage03			getrusage03 0 TINFO  : allocate 100MB getrusage03 1 TBROK  : malloc failed at getrusage03.c:344: errno=ENOMEM(12): Cannot allocate memory getrusage03 2 TBROK  : Remaining cases broken	n/a	Not enough memory. Mpc8315e-rdb only have 128M memory.	n/a
ksm05	LTP		ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
clock_settime03	LTP		clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01	LTP		proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	/proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0	n/a
readlink03	LTP		readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M1 RC2

total: 38 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
vma01			vma01 0 TINFO  : t = 0x40002000 vma01 0 TINFO  : v = 0x40103000 u = 0x40005000 vma01 0 TINFO  : s = 0x40005000, t = 0x40008000 vma01 1 TBROK  : no matched s = 0x40008000 found. vma01 2 TBROK  : Remaining cases broken vma01 0 TINFO  : t = 0x40002000 vma01 0 TINFO  : v = 0x40103000 vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		n/a
getrusage03			getrusage03 0 TINFO  : allocate 100MB getrusage03 1 TBROK  : malloc failed at getrusage03.c:344: errno=ENOMEM(12): Cannot allocate memory getrusage03 2 TBROK  : Remaining cases broken	n/a	Not enough memory. Mpc8315e-rdb only have 128M memory.	n/a
ksm05	LTP		ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
sched_getaffinity01			sched_getaffinity01 4 TFAIL  : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success	n/a		n/a
clock_settime03	LTP		clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01	LTP		proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	/proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0	n/a
readlink03	LTP		readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.0.2

total: 36 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
mmap11	LTP		mmap11 0 TINFO  : [471] mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
quota_remount_test01			mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed	n/a
ioctl03	Qemuarm	n/a	n/a	n/a		n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M4 RC4

total: 39 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
clock_settime03			clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01			proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	/proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0	n/a
readlink03	LTP		readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap11	LTP		mmap11 0 TINFO  : [471] mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M4 RC3

total: 39 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
clock_settime03			clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01			proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
readlink03	LTP		readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap11	LTP		mmap11 0 TINFO  : [471] mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M4 RC2

total: 39 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
clock_settime03	NEW		clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a		n/a
readlink03	NEW		readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	NEW		sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
proc01	NEW		proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a		n/a
mmap11	LTP		mmap11 0 TINFO  : [471] mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M3

total: 42 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
mmap11	NEW		mmap11 0 TINFO  : [471] mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
mmap10_2	NEW		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
mmap10_3	NEW		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
mmap10_4	NEW		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
mmap10_5	NEW		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
ksm01	NEW		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
ksm01_1	NEW		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
ksm03	NEW		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
ksm03_1	NEW		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
gf02			growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL  : Test failed	n/a		[bug1138]
gf05			growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL  : Test failed	n/a		[bug1138]
gf07			growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL  : Test failed	n/a		[bug1138]
gf09			growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL  : Test failed	n/a		[bug1138]
gf19			growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL  : Test failed	n/a		[bug1138]
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
quota_remount_test01			mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed	n/a
ioctl03	Qemuarm	n/a	n/a	n/a		n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	NEW	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M2

total: 31 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
gf02			growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL  : Test failed	n/a		[bug1138]
gf05			growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL  : Test failed	n/a		[bug1138]
gf07			growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL  : Test failed	n/a		[bug1138]
gf09			growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL  : Test failed	n/a		[bug1138]
gf19			growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL  : Test failed	n/a		[bug1138]
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
quota_remount_test01			mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M1

total: 32 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
gf02	NEW		growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL  : Test failed	n/a		[bug1138]
gf05	NEW		growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL  : Test failed	n/a		[bug1138]
gf07	NEW		growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL  : Test failed	n/a		[bug1138]
gf09	NEW		growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL  : Test failed	n/a		[bug1138]
gf19	NEW		growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL  : Test failed	n/a		[bug1138]
ld	NEW		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a		[bug1162]
quota_remount_test01			mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed	n/a
ioctl03	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.0/M4 -RC2

total: 45

• NEW Introduced: 17

• Duplicated: 28

similarity: 28 (62.00%):

LTP cases	status	owner	error msg	lsb	comment	bugzilla
fchown04	n/a	n/a	fchown04 1 TBROK  : chown(/opt/tmp/ltp-XXXXjXIJS0/fchy8wBtx, -1, 0) failed; errno = 1: Operation not permitted	n/a	n/a	n/a
fcntl16	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa/.nfs000000000047e62e00000025) failed; errno=16: Device or resource busy	n/a	n/a	n/a
fcntl16_64	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa/.nfs000000000047e62e00000025) failed; errno=16: Device or resource busy	n/a	n/a	n/a
fchown04_16	n/a	n/a	fchown04 1 TBROK  : chown(/opt/tmp/ltp-XXXXjXIJS0/fchy8wBtx, -1, 0) failed; errno = 1: Operation not permitted	n/a	n/a	n/a
fork09	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/forZI4A7w) failed: rmdir(/opt/tmp/ltp-XXXXjXIJS0/forZI4A7w) failed; errno=39: Directory not empty	n/a	n/a	n/a
inotify02	n/a	n/a	don't get event: mask=bfc3b270	n/a	n/a	n/a
libevent01	n/a	n/a	sh: /opt/ltp/testcases/bin/libevent/run_libevent.sh: not found	n/a	n/a	n/a
open10	n/a	n/a	open10.testdir.B.22779/setgid: Incorrect modes, setgid bit not set	n/a	n/a	n/a
recvmsg01	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/reca51FYA) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/reca51FYA/.nfs000000000047ea3a00000038) failed; errno=16: Device or resource busy	n/a	n/a	n/a
sendmsg01	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/senqTfDE6) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/senqTfDE6/.nfs000000000047ea3e0000209d) failed; errno=16: Device or resource busy	n/a	n/a	n/a
utimensat01	n/a	n/a	/opt/ltp/testcases/bin/utimensat_tests.sh: exit: line 488: Illegal number: -1	n/a	n/a	n/a
openfile01	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/opeSW4SGW) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/opeSW4SGW/.nfs000000000047eab9000020a5) failed; errno=16: Device or resource busy	n/a	n/a	n/a
quota_remount_test01	n/a	n/a	mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed	n/a	n/a	n/a
dio04	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/diopbB3SB) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/diopbB3SB/.nfs000000000047eb7c000020a9) failed; errno=16: Device or resource busy	n/a	n/a	n/a
dio10	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/dioPqQ0qQ) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/dioPqQ0qQ/.nfs000000000047eb90000020ad) failed; errno=16: Device or resource busy	n/a	n/a	n/a
mmapstress01	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/mmabR9vuy) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/mmabR9vuy/.nfs000000000047eb98000020d4) failed; errno=16: Device or resource busy	n/a	n/a	n/a
mmapstress10	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/mmaBuQ5I6) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/mmaBuQ5I6/.nfs000000000047ed29000020d5) failed; errno=16: Device or resource busy	n/a	n/a	n/a
ioctl03	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02_16	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	qemux86	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
ldd	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M5 RC2 20120926 build

total: 18 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M4 RC3 20120916 build

total: 20 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
get_robust_list01	LTP	n/a	get_robust_list01 4 TFAIL  : get_robust_list succeeded unexpectedly	n/a	It is a LTP bug. Wait for upstream	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M3 RC2 20120814 build

total: 21 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
get_robust_list01	LTP	n/a	get_robust_list01 4 TFAIL  : get_robust_list succeeded unexpectedly	n/a	It is a LTP bug. Wait for upstream	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
proc01	LTP	n/a	proc01 1 TFAIL  : read failed: /proc/sys/kernel/ftrace_enabled: errno=ENODEV(19): No such device	n/a	This is a LTP bug	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 20120801 build

total: 24 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
get_robust_list01	LTP	n/a	get_robust_list01 4 TFAIL  : get_robust_list succeeded unexpectedly	n/a	It is a LTP bug. Wait for upstream	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
proc01	LTP	n/a	proc01 1 TFAIL  : read failed: /proc/sys/kernel/ftrace_enabled: errno=ENODEV(19): No such device	n/a	This is a LTP bug	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1.2 20120630 build

total: 29 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
readlink03	LTP	n/a	readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22	n/a	This is a LTP bug. Has been fixed in upstream.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2.1 20120629 build

total: 22 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
dio24	NEW	n/a	diotest05 3 TFAIL  : readv/writev comparision failed	n/a	It could pass when run again	n/a
setxattr03	NAB	n/a	setxattr03 0 TWARN  : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument setxattr03 0 TWARN  : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument	n/a	No xattr support in fs or fs mounted without user_xattr option	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M1 RC1 20120613 build

total: 30 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
get_robust_list01	LTP	n/a	get_robust_list01 4 TFAIL  : get_robust_list succeeded unexpectedly	n/a	It is a LTP bug. Wait for upstream	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	mmap1 caught unexpected signal - 11 --- exiting	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 20120606 build

total: 29 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	mmap1 caught unexpected signal - 11 --- exiting	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 RC5 Denzil

total: 21 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
setxattr03	NAB	n/a	setxattr03 0 TWARN  : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument setxattr03 0 TWARN  : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument	n/a	No xattr support in fs or fs mounted without user_xattr option	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 RC4 Denzil

total: 23 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
sendfile02	NAB	n/a	sendfile02 2 TBROK  : call to bind() failed: Address already in use	n/a	It is not a bug.	n/a
setxattr03	NAB	n/a	setxattr03 0 TWARN  : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument setxattr03 0 TWARN  : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument	n/a	No xattr support in fs or fs mounted without user_xattr option	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
ksm05	LTP	n/a	ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M4 RC3

total: 21 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
setxattr03	NAB	n/a	setxattr03 0 TWARN  : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument setxattr03 0 TWARN  : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument	n/a	No xattr support in fs or fs mounted without user_xattr option	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M4 RC2

total: 20 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
readlink03	LTP	n/a	readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22	n/a	This is a LTP bug. Has been fixed in upstream.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
sched_getaffinity01			sched_getaffinity01 4 TFAIL  : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success	n/a		n/a
vma01		n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M4 RC1

total: 20 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
readlink03	LTP	n/a	readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22	n/a	This is a LTP bug. Has been fixed in upstream.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
ksm05	LTP	n/a	ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
vma01		n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M3 RC1

total: 20 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
getrusage03	NAB	n/a	getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
readlink03	LTP	n/a	readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22	n/a	This is a LTP bug. Has been fixed in upstream.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
ksm05	LTP	n/a	ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
vma01		n/a	vma01 1 TBROK  : no matched s = 0x40072000 found. vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1.1

total: 41 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
fork13			fork13 1 TFAIL  : Wait return value: expected pid=9129, got 22911, iteration 998600.	n/a		n/a
sched_getaffinity01			sched_getaffinity01 4 TFAIL  : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success	n/a		n/a
clock_settime03	LTP		clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01	LTP		proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	/proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0	n/a
readlink03	LTP		readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap11	LTP		mmap11 0 TINFO  : [471] mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M2 RC1

total: 31 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
nm	NEW		-------System test for nm command------ nm: nmfile1.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm -A: FAIL	n/a		n/a
ldd	NEW		/usr/lib/gcc/powerpc-poky-linux/4.6.3/../../../crt1.o:(.rodata+0x4): undefined reference to `main' collect2: ld returned 1 exit status ASSERTION 1 ldd: /tmp/ldd01-23462/a.out: No such file or directory ASSERTION #1 FAIL	n/a		n/a
vma01			vma01 0 TINFO  : t = 0x40002000 vma01 0 TINFO  : v = 0x40103000 u = 0x40005000 vma01 0 TINFO  : s = 0x40005000, t = 0x40008000 vma01 1 TBROK  : no matched s = 0x40008000 found. vma01 2 TBROK  : Remaining cases broken vma01 0 TINFO  : t = 0x40002000 vma01 0 TINFO  : v = 0x40103000 vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		n/a
getrusage03			getrusage03 0 TINFO  : allocate 100MB getrusage03 1 TBROK  : malloc failed at getrusage03.c:344: errno=ENOMEM(12): Cannot allocate memory getrusage03 2 TBROK  : Remaining cases broken	n/a	Not enough memory. Mpc8315e-rdb only have 128M memory.	n/a
ksm05	LTP		ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
clock_settime03	LTP		clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01	LTP		proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	/proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0	n/a
readlink03	LTP		readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M1 RC2

total: 38 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
vma01			vma01 0 TINFO  : t = 0x40002000 vma01 0 TINFO  : v = 0x40103000 u = 0x40005000 vma01 0 TINFO  : s = 0x40005000, t = 0x40008000 vma01 1 TBROK  : no matched s = 0x40008000 found. vma01 2 TBROK  : Remaining cases broken vma01 0 TINFO  : t = 0x40002000 vma01 0 TINFO  : v = 0x40103000 vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken	n/a		n/a
getrusage03			getrusage03 0 TINFO  : allocate 100MB getrusage03 1 TBROK  : malloc failed at getrusage03.c:344: errno=ENOMEM(12): Cannot allocate memory getrusage03 2 TBROK  : Remaining cases broken	n/a	Not enough memory. Mpc8315e-rdb only have 128M memory.	n/a
ksm05	LTP		ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
sched_getaffinity01			sched_getaffinity01 4 TFAIL  : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success	n/a		n/a
clock_settime03	LTP		clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01	LTP		proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	/proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0	n/a
readlink03	LTP		readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.0.2

total: 36 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
mmap11	LTP		mmap11 0 TINFO  : [471] mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
quota_remount_test01			mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed	n/a
ioctl03	Qemuarm	n/a	n/a	n/a		n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M4 RC4

total: 39 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
clock_settime03			clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01			proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	/proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0	n/a
readlink03	LTP		readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap11	LTP		mmap11 0 TINFO  : [471] mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M4 RC3

total: 39 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
clock_settime03			clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01			proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
readlink03	LTP		readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap11	LTP		mmap11 0 TINFO  : [471] mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M4 RC2

total: 39 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
clock_settime03	NEW		clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a		n/a
readlink03	NEW		readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	NEW		sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
proc01	NEW		proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a		n/a
mmap11	LTP		mmap11 0 TINFO  : [471] mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M3

total: 42 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
mmap11	NEW		mmap11 0 TINFO  : [471] mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
mmap10_2	NEW		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
mmap10_3	NEW		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
mmap10_4	NEW		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
mmap10_5	NEW		mmap10 0 TINFO  : add to KSM regions. mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
ksm01	NEW		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
ksm01_1	NEW		ksm01 0 TINFO  : KSM merging... ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
ksm03	NEW		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
ksm03_1	NEW		ksm03 0 TINFO  : KSM merging... ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken	n/a	n/a	n/a
gf02			growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL  : Test failed	n/a		[bug1138]
gf05			growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL  : Test failed	n/a		[bug1138]
gf07			growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL  : Test failed	n/a		[bug1138]
gf09			growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL  : Test failed	n/a		[bug1138]
gf19			growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL  : Test failed	n/a		[bug1138]
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
quota_remount_test01			mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed	n/a
ioctl03	Qemuarm	n/a	n/a	n/a		n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	NEW	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M2

total: 31 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
gf02			growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL  : Test failed	n/a		[bug1138]
gf05			growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL  : Test failed	n/a		[bug1138]
gf07			growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL  : Test failed	n/a		[bug1138]
gf09			growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL  : Test failed	n/a		[bug1138]
gf19			growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL  : Test failed	n/a		[bug1138]
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
quota_remount_test01			mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M1

total: 32 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
gf02	NEW		growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL  : Test failed	n/a		[bug1138]
gf05	NEW		growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL  : Test failed	n/a		[bug1138]
gf07	NEW		growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL  : Test failed	n/a		[bug1138]
gf09	NEW		growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL  : Test failed	n/a		[bug1138]
gf19	NEW		growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL  : Test failed	n/a		[bug1138]
ld	NEW		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a		[bug1162]
quota_remount_test01			mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed	n/a
ioctl03	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.0/M4 -RC2

total: 45

• NEW Introduced: 17

• Duplicated: 28

similarity: 28 (62.00%):

LTP cases	status	owner	error msg	lsb	comment	bugzilla
fchown04	n/a	n/a	fchown04 1 TBROK  : chown(/opt/tmp/ltp-XXXXjXIJS0/fchy8wBtx, -1, 0) failed; errno = 1: Operation not permitted	n/a	n/a	n/a
fcntl16	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa/.nfs000000000047e62e00000025) failed; errno=16: Device or resource busy	n/a	n/a	n/a
fcntl16_64	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa/.nfs000000000047e62e00000025) failed; errno=16: Device or resource busy	n/a	n/a	n/a
fchown04_16	n/a	n/a	fchown04 1 TBROK  : chown(/opt/tmp/ltp-XXXXjXIJS0/fchy8wBtx, -1, 0) failed; errno = 1: Operation not permitted	n/a	n/a	n/a
fork09	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/forZI4A7w) failed: rmdir(/opt/tmp/ltp-XXXXjXIJS0/forZI4A7w) failed; errno=39: Directory not empty	n/a	n/a	n/a
inotify02	n/a	n/a	don't get event: mask=bfc3b270	n/a	n/a	n/a
libevent01	n/a	n/a	sh: /opt/ltp/testcases/bin/libevent/run_libevent.sh: not found	n/a	n/a	n/a
open10	n/a	n/a	open10.testdir.B.22779/setgid: Incorrect modes, setgid bit not set	n/a	n/a	n/a
recvmsg01	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/reca51FYA) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/reca51FYA/.nfs000000000047ea3a00000038) failed; errno=16: Device or resource busy	n/a	n/a	n/a
sendmsg01	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/senqTfDE6) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/senqTfDE6/.nfs000000000047ea3e0000209d) failed; errno=16: Device or resource busy	n/a	n/a	n/a
utimensat01	n/a	n/a	/opt/ltp/testcases/bin/utimensat_tests.sh: exit: line 488: Illegal number: -1	n/a	n/a	n/a
openfile01	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/opeSW4SGW) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/opeSW4SGW/.nfs000000000047eab9000020a5) failed; errno=16: Device or resource busy	n/a	n/a	n/a
quota_remount_test01	n/a	n/a	mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed	n/a	n/a	n/a
dio04	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/diopbB3SB) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/diopbB3SB/.nfs000000000047eb7c000020a9) failed; errno=16: Device or resource busy	n/a	n/a	n/a
dio10	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/dioPqQ0qQ) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/dioPqQ0qQ/.nfs000000000047eb90000020ad) failed; errno=16: Device or resource busy	n/a	n/a	n/a
mmapstress01	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/mmabR9vuy) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/mmabR9vuy/.nfs000000000047eb98000020d4) failed; errno=16: Device or resource busy	n/a	n/a	n/a
mmapstress10	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/mmaBuQ5I6) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/mmaBuQ5I6/.nfs000000000047ed29000020d5) failed; errno=16: Device or resource busy	n/a	n/a	n/a
ioctl03	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02_16	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	qemux86	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
ldd	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a