Accessing Autobuilders
Connecting to Autobuilders
We use an ssh jumphost called access.yoctoproject.org/access.yocto.io to connect to the autobuilders. Jumphosts enhance security by removing the threat of hijacked ssh-agents and limiting the services running on Internet exposed hosts.
Generate keys
In order to access any of the autobuilders your ssh public keys must first be installed. The preferred way to generate a key is type RSA with 2048 bits or greater. Please put your e-mail, the date of generation, and the host the key lives on in the comment. Please set a passphrase even if it's a simple one! Ideally your private key will never leave the host it is generated on - so if you have multiple machines please generate multiple keys. E-mail your public key named id_rsa.pub to hostmaster@yoctoproject.org. Keep id_rsa(the private key) super safe. Please never share it with anyone or copy it onto the Internet. Don't e-mail it to yourself either.
ssh-keygen -b 4096 -t rsa -C "your.email@company.com_2012-05-30_localhostname"
Substitute your own e-mail and your computer's hostname in the command above. Setting these helps with troubleshooting in the future.
Configure ssh
Edit ~/.ssh/config on your local machine and add:
Host access.yoctoproject.org # Make sure your username matches your account on the autobuilder #User [username] # Give the full path to the proper public key if needed #IdentityFile /home/[username]/.ssh/id_rsa # If your network requires you to use a SOCKS proxy enable it here # ProxyCommand nc -X5 -x [proxyserver.address.company.com:1080] %h %p # If your system uses 'ncat', rather than 'netcat', use these options to enable a SOCKS proxy # ProxyCommand nc --proxy-type socks5 --proxy [proxyserver.address.company.com:1080] %h %p # *.yocto.io except for access is internal. Proxy through the bastion. Host !access.yocto.io *.yocto.io ProxyJump access.yoctoproject.org # Correct username and key repeated from above. #User [username] #IdentityFile /home/[username]/.ssh/id_rsa # We don't need strict checking on the private network. StrictHostKeyChecking no VisualHostKey no # Don't bother saving hostkeys we don't check UserKnownHostsFile /dev/null
Verify Fingerprints
Now actually ssh to access.yoctoproject.org and verify that the fingerprint you receive matches a fingerprint below.
access.yocto.io 256 SHA256:d3eQ8azExpEKfcJExpUSpgw9D7gZgVDZ6gl4Bt5r6cQ (ED25519) 256 SHA256:jKW/rkm3+bNdtJ5CepVyHsxnbY8T78hk7lLwB0or0uA (ECDSA) 2048 SHA256:Qpvu4aUBox4eaYTeneRx5zMjwKTsZrJnn5VS9N5w+Fo (RSA)
Connect!
Now that you've added access.yoctoproject.org to your known hosts you don't need to worry about fingerprints anymore. Time to connect to a builder. Run:
ssh centos8-ty-1.yocto.io
If all worked correctly you are now logged in. Build workers are [listed on the controller](https://autobuilder.yoctoproject.org/typhoon/#/workers). Append .yocto.io to the name to ssh.
Need to work on the build scripts?
If you are on the SWAT team you can access pokybuild using this sudo command:
sudo -iu pokybuild
keywords: ssh access auto builder accessing autobuilders