Image tests

From Yocto Project
Revision as of 11:58, 19 August 2013 by Stefans (talk | contribs)
Jump to navigationJump to search

About the the testimage class

The build system has the ability to run a series of automated tests for qemu images.

All the tests are actually commands run on the target system over ssh.

The tests themselves are written in Python, making use of the unittest module.

The class that enables this is testimage.bbclass (which handles loading the tests and starting the qemu image)


Enabling and running the tests

Requirements

You should be aware of the following:

  • runqemu script needs sudo access for setting up the tap interface, so you need to make sure it can do that non-interactively. That means you need to one of the following:
    • add NOPASSWD for your user either for ALL commands in /etc/sudoers, either just for runqemu-ifup (but you need to provide the full path and that can change if you have multiple poky clones)
    • manually configure a tap interface for your system
    • run as root the script in scripts/runqemu-gen-tapdev which should generate a list of tap devices (that's usually done in AutoBuilder-like setups)
  • the DISPLAY variable needs to be set so that means you need to have an X server available (e.g start vncserver)


To use it add "testimage" to global inherit and call your target image with -c testimage, like this:

  • for example build a qemu core-image-sato: bitbake core-image-sato
  • add INHERIT += "testimage" in local.conf
  • then call "bitbake core-image-sato -c testimage". That will run a standard suite of tests.

The name of tests is the name of the python modules in meta/lib/oeqa/runtime.

You can change the tests run by appending or overrding the TEST_SUITES variable in local.conf. Each name in TEST_SUITES represents a required test for the image. That means that no skipping is allowed (even if the test isn't suitable for the image, e.g running the rpm tests on a images with no rpm). Appending "auto" to TEST_SUITES means that it will try to run all tests that are suitable for the image (each test decides that on it's own).

Note that the order in TEST_SUITES is important (it's the order modules run) and it influences tests dependencies. That means that tests that depend on other tests (e.g ssh depends on the ping test) should be added last. Each module can have multiple classes with multiple test methods (and Python unittest rules apply here).

Examples

Examples:

  • to run the default tests for core-image-sato you don't need to change TEST_SUITES. The default for core-image-sato is: "ping ssh connman df rpm smart xorg syslog dmesg"
  • to add your own test to the list of the defaults add: TEST_SUITES_append = " mytest"
  • to run a specific list of tests: TEST_SUITES = "ping ssh rpm" (remember order is important)

Once you call the testimage task (bitbake <my-image> -c testimage) a couple of things happen:

  • a copy of the rootfs is done in ${WORKDIR}/testimage
  • the image is booted under qemu using the standard runqemu script
  • there is a timeout of 500 seconds by default for the boot process to reach the login prompt (you can change the timeout by setting TEST_QEMUBOOT_TIMEOUT in local.conf)
  • once the boot process reached the login prompt the tests are run (you can find the full boot log in ${WORKDIR}/testimage/qemu_boot_log)
  • each test module is loaded in the order found in TEST_SUITES (the full output of the commands ran over ssh is found in ${WORKDIR}/testimgage/ssh_target_log)
  • if there are no fails, the task will end successfully. You can find the output from the unittest in the task log (in ${WORKDIR}/temp/log.do_testimage)

Example of log for an systemd-enabled image that has package-management features and ssh and TEST_SUITES = "ping ssh rpm auto" in local.conf 

$ cat tmp/work/qemux86_64-poky-linux/core-image-base/1.0-r0/temp/log.do_testimage
DEBUG: Executing python function do_testimage
NOTE: Created listening socket for qemu serial console on: 127.0.0.1:56358
NOTE: DISPLAY value: :0
NOTE: rootfs file: /home/stefans/yocto/builds/firefly/tmp/work/qemux86_64-poky-linux/core-image-base/1.0-r0/testimage/core-image-base-qemux86-64-testimage.ext3
NOTE: Qemu log file: /home/stefans/yocto/builds/firefly/tmp/work/qemux86_64-poky-linux/core-image-base/1.0-r0/testimage/qemu_boot_log.20130819115123
NOTE: SSH log file: /home/stefans/yocto/builds/firefly/tmp/work/qemux86_64-poky-linux/core-image-base/1.0-r0/testimage/ssh_target_log.20130819115123
NOTE: runqemu started, pid is 2979
NOTE: waiting at most 60 seconds for qemu pid
NOTE: qemu started - qemu procces pid is 3061
NOTE: IP found: 192.168.7.2
NOTE: Waiting at most 500 seconds for login banner
NOTE: Connection from 127.0.0.1:44406
NOTE: Reached login banner
NOTE: Test modules  ['oeqa.runtime.ping', 'oeqa.runtime.ssh', 'oeqa.runtime.rpm', 'oeqa.runtime.multilib', 'oeqa.runtime.smart', 'oeqa.runtime.dmesg', 'oeqa.runtime.df', 'oeqa.runtime.connman', 'oeqa.runtime.gcc', 'oeqa.runtime.xorg', 'oeqa.runtime.syslog', 'oeqa.runtime.systemd']
NOTE: Found 31 tests
test_ping (oeqa.runtime.ping.PingTest) ... ok
test_ssh (oeqa.runtime.ssh.SshTest) ... ok
test_rpm_help (oeqa.runtime.rpm.RpmHelpTest) ... ok
test_rpm_query (oeqa.runtime.rpm.RpmQueryTest) ... ok
skipped "multilib: this isn't a multilib:lib32 image"
test_smart_help (oeqa.runtime.smart.SmartHelpTest) ... ok
test_smart_info (oeqa.runtime.smart.SmartQueryTest) ... ok
test_smart_query (oeqa.runtime.smart.SmartQueryTest) ... ok
test_dmesg (oeqa.runtime.dmesg.DmesgTest) ... ok
test_df (oeqa.runtime.df.DfTest) ... ok
skipped 'connman: No connman package in image'
skipped "gcc: Image doesn't have tools-sdk in IMAGE_FEATURES"
skipped "xorg: target doesn't have x11 in IMAGE_FEATURES"
test_syslog_help (oeqa.runtime.syslog.SyslogTest) ... ok
test_syslog_running (oeqa.runtime.syslog.SyslogTest) ... ok
test_syslog_logger (oeqa.runtime.syslog.SyslogTestConfig) ... ok
test_syslog_restart (oeqa.runtime.syslog.SyslogTestConfig) ... ok
test_syslog_startup_config (oeqa.runtime.syslog.SyslogTestConfig) ... skipped 'Not appropiate for systemd image'
test_systemd_version (oeqa.runtime.systemd.SystemdBasicTest) ... ok
test_systemd_disable (oeqa.runtime.systemd.SystemdTests) ... ok
test_systemd_enable (oeqa.runtime.systemd.SystemdTests) ... ok
test_systemd_failed (oeqa.runtime.systemd.SystemdTests) ... ok
test_systemd_list (oeqa.runtime.systemd.SystemdTests) ... ok
test_systemd_service (oeqa.runtime.systemd.SystemdTests) ... ok
test_systemd_start (oeqa.runtime.systemd.SystemdTests) ... ok
test_systemd_stop (oeqa.runtime.systemd.SystemdTests) ... ok

----------------------------------------------------------------------
Ran 22 tests in 48.492s

OK (skipped=5)
NOTE: All required tests passed
DEBUG: Python function do_testimage finished

As you can see some tests passed and some of them were skipped (because they weren't applicable for this image). And while I haven added systemd tests to TEST_SUITES the tests were run (because of auto). Let's see what happens if I use TEST_SUITES = "ping ssh xorg" instead (and this image doesn't have X installed): 

--snip--
Retrieved from "https://wiki.yoctoproject.org/wiki/index.php?title=Image_tests&oldid=10916"