Mpc8315e-rdb-ltp: Difference between revisions
Line 1: | Line 1: | ||
==1.4 M5 RC1 20121228 build== | |||
'''total: 18 (100%)''' | |||
{|border="1" | |||
|| '''LTP cases'''|| '''status''' || '''owner''' || '''error msg''' || '''lsb''' || '''comment''' || '''bugzilla''' | |||
|- | |||
|| aio02 || NAB || n/a || io_fsync write: Invalid argument || n/a || io_fsync write: Invalid argument || n/a | |||
|- | |||
|| thp02 || NAB || n/a || thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || n/a || PPC doesn't support it || n/a | |||
|- | |||
|| getrusage03 || NAB || n/a || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | |||
|| n/a || Not enough memory. Mpc8315e-rdb have 128M memory. || n/a | |||
|- | |||
|| sysctl03 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a | |||
|- | |||
|| syslog01 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a | |||
|- | |||
|| syslog02 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a | |||
|- | |||
|| mtest06_2 || NAB || n/a || main(): mmap(): Cannot allocate memory || n/a || Not enough memory. Mpc8315e-rdb have 128M memory. || n/a | |||
|- | |||
|| mmapstress06 || [[qemux86-ltp|qemux86]] || || mmapstress06: errno = 12; large mmap failed | |||
for this test to run, it needs a mmap space of | |||
32769 pages | |||
|| n/a || n/a || n/a | |||
|- | |||
|| su01 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a | |||
|- | |||
|| cron02 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a | |||
|- | |||
|| cron_deny01 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a | |||
|- | |||
|| cron_allow01 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a | |||
|- | |||
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a | |||
|- | |||
|| file || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a | |||
|- | |||
|| cron || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a | |||
|- | |||
|| logrotate || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a | |||
|- | |||
|| cpio || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a | |||
|- | |||
|| unzip01 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a | |||
|- | |||
|} | |||
==1.2.2 20121018 build== | ==1.2.2 20121018 build== | ||
'''total: 21 (100%)''' | '''total: 21 (100%)''' | ||
Line 52: | Line 99: | ||
|- | |- | ||
|} | |} | ||
==1.3 M5 RC4 20121010 build== | ==1.3 M5 RC4 20121010 build== |
Revision as of 09:22, 4 December 2012
1.4 M5 RC1 20121228 build
total: 18 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | PPC doesn't support it | n/a |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2.2 20121018 build
total: 21 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
process_vm_readv01 | NAB | n/a | process_vm_readv 29 TFAIL : unexpected failure - expected = 14 : Bad address, actual: TEST_ERRNO=???(38): Function not implemented | n/a | Kernel doesn't support | n/a |
process_vm_writev01 | NAB | n/a | process_vm_writev 29 TFAIL : unexpected failure - expected = 14 : Bad address, actual: TEST_ERRNO=???(38): Function not implemented | n/a | Kernel doesn't support | n/a |
ksm05 | LTP | n/a | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory | n/a | It is a LTP bug. | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | PPC doesn't support it | n/a |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.3 M5 RC4 20121010 build
total: 18 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | PPC doesn't support it | n/a |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.3 M5 RC3 20121003 build
total: 18 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | PPC doesn't support it | n/a |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.3 M4 RC3 20120916 build
total: 20 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
get_robust_list01 | LTP | n/a | get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly | n/a | It is a LTP bug. Wait for upstream | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | PPC doesn't support it | n/a |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.3 M3 RC2 20120814 build
total: 21 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
get_robust_list01 | LTP | n/a | get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly | n/a | It is a LTP bug. Wait for upstream | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | PPC doesn't support it | n/a |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
proc01 | LTP | n/a | proc01 1 TFAIL : read failed: /proc/sys/kernel/ftrace_enabled: errno=ENODEV(19): No such device | n/a | This is a LTP bug | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.3 20120801 build
total: 24 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
get_robust_list01 | LTP | n/a | get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly | n/a | It is a LTP bug. Wait for upstream | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | PPC doesn't support it | n/a |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
proc01 | LTP | n/a | proc01 1 TFAIL : read failed: /proc/sys/kernel/ftrace_enabled: errno=ENODEV(19): No such device | n/a | This is a LTP bug | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1.2 20120630 build
total: 29 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | n/a | |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
readlink03 | LTP | n/a | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22 | n/a | This is a LTP bug. Has been fixed in upstream. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2.1 20120629 build
total: 22 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
dio24 | NEW | n/a | diotest05 3 TFAIL : readv/writev comparision failed | n/a | It could pass when run again | n/a |
setxattr03 | NAB | n/a | setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument
setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument |
n/a | No xattr support in fs or fs mounted without user_xattr option | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | n/a | |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.3 M1 RC1 20120613 build
total: 30 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
get_robust_list01 | LTP | n/a | get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly | n/a | It is a LTP bug. Wait for upstream | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | n/a | |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | mmap1 caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.3 20120606 build
total: 29 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | n/a | |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | mmap1 caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2 RC5 Denzil
total: 21 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
setxattr03 | NAB | n/a | setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument
setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument |
n/a | No xattr support in fs or fs mounted without user_xattr option | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | n/a | |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2 RC4 Denzil
total: 23 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
sendfile02 | NAB | n/a | sendfile02 2 TBROK : call to bind() failed: Address already in use | n/a | It is not a bug. | n/a |
setxattr03 | NAB | n/a | setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument
setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument |
n/a | No xattr support in fs or fs mounted without user_xattr option | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | n/a | |
ksm05 | LTP | n/a | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory | n/a | It is a LTP bug. | n/a |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2 M4 RC3
total: 21 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
setxattr03 | NAB | n/a | setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument
setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument |
n/a | No xattr support in fs or fs mounted without user_xattr option | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | n/a | |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2 M4 RC2
total: 20 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
readlink03 | LTP | n/a | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22 | n/a | This is a LTP bug. Has been fixed in upstream. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
sched_getaffinity01 | sched_getaffinity01 4 TFAIL : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success | n/a | n/a | |||
vma01 | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | ||
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2 M4 RC1
total: 20 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
readlink03 | LTP | n/a | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22 | n/a | This is a LTP bug. Has been fixed in upstream. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
ksm05 | LTP | n/a | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory | n/a | It is a LTP bug. | n/a |
vma01 | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | ||
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2 M3 RC1
total: 20 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
readlink03 | LTP | n/a | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22 | n/a | This is a LTP bug. Has been fixed in upstream. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
ksm05 | LTP | n/a | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory | n/a | It is a LTP bug. | n/a |
vma01 | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | ||
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1.1
total: 41 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
fork13 | fork13 1 TFAIL : Wait return value: expected pid=9129, got 22911, iteration 998600. | n/a | n/a | |||
sched_getaffinity01 | sched_getaffinity01 4 TFAIL : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success | n/a | n/a | |||
clock_settime03 | LTP | clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument
clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument |
n/a | introduced with 3.0 kernel | n/a | |
proc01 | LTP | proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument
proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument |
n/a | /proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0 | n/a | |
readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
sockioctl01 | LTP | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
mmap11 | LTP | mmap11 0 TINFO : [471]
mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01_1 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03_1 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | n/a | n/a | n/a | n/a | n/a | |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2 M2 RC1
total: 31 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
nm | NEW | -------System test for nm command------
nm: nmfile1.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm -A: FAIL |
n/a | n/a | ||
ldd | NEW | /usr/lib/gcc/powerpc-poky-linux/4.6.3/../../../crt1.o:(.rodata+0x4): undefined reference to `main'
collect2: ld returned 1 exit status ASSERTION 1 ldd: /tmp/ldd01-23462/a.out: No such file or directory ASSERTION #1 FAIL |
n/a | n/a | ||
vma01 | vma01 0 TINFO : t = 0x40002000
vma01 0 TINFO : v = 0x40103000 u = 0x40005000 vma01 0 TINFO : s = 0x40005000, t = 0x40008000 vma01 1 TBROK : no matched s = 0x40008000 found. vma01 2 TBROK : Remaining cases broken vma01 0 TINFO : t = 0x40002000 vma01 0 TINFO : v = 0x40103000 vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | n/a | |||
getrusage03 | getrusage03 0 TINFO : allocate 100MB
getrusage03 1 TBROK : malloc failed at getrusage03.c:344: errno=ENOMEM(12): Cannot allocate memory getrusage03 2 TBROK : Remaining cases broken |
n/a | Not enough memory. Mpc8315e-rdb only have 128M memory. | n/a | ||
ksm05 | LTP | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory | n/a | It is a LTP bug. | n/a | |
clock_settime03 | LTP | clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument
clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument |
n/a | introduced with 3.0 kernel | n/a | |
proc01 | LTP | proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument
proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument |
n/a | /proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0 | n/a | |
readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
sockioctl01 | LTP | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2 M1 RC2
total: 38 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
vma01 | vma01 0 TINFO : t = 0x40002000
vma01 0 TINFO : v = 0x40103000 u = 0x40005000 vma01 0 TINFO : s = 0x40005000, t = 0x40008000 vma01 1 TBROK : no matched s = 0x40008000 found. vma01 2 TBROK : Remaining cases broken vma01 0 TINFO : t = 0x40002000 vma01 0 TINFO : v = 0x40103000 vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | n/a | |||
getrusage03 | getrusage03 0 TINFO : allocate 100MB
getrusage03 1 TBROK : malloc failed at getrusage03.c:344: errno=ENOMEM(12): Cannot allocate memory getrusage03 2 TBROK : Remaining cases broken |
n/a | Not enough memory. Mpc8315e-rdb only have 128M memory. | n/a | ||
ksm05 | LTP | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory | n/a | It is a LTP bug. | n/a | |
sched_getaffinity01 | sched_getaffinity01 4 TFAIL : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success | n/a | n/a | |||
clock_settime03 | LTP | clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument
clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument |
n/a | introduced with 3.0 kernel | n/a | |
proc01 | LTP | proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument
proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument |
n/a | /proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0 | n/a | |
readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
sockioctl01 | LTP | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | n/a | n/a | n/a | n/a | n/a | |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.0.2
total: 36 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
mmap11 | LTP | mmap11 0 TINFO : [471]
mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01_1 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03_1 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
quota_remount_test01 | mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed | n/a | ||||
ioctl03 | Qemuarm | n/a | n/a | n/a | n/a | |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | n/a | n/a | n/a | n/a | n/a | |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1/M4 RC4
total: 39 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
clock_settime03 | clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument
clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument |
n/a | introduced with 3.0 kernel | n/a | ||
proc01 | proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument
proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument |
n/a | /proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0 | n/a | ||
readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
sockioctl01 | LTP | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
mmap11 | LTP | mmap11 0 TINFO : [471]
mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01_1 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03_1 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | n/a | n/a | n/a | n/a | n/a | |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1/M4 RC3
total: 39 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
clock_settime03 | clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument
clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument |
n/a | introduced with 3.0 kernel | n/a | ||
proc01 | proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument
proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument |
n/a | introduced with 3.0 kernel | n/a | ||
readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
sockioctl01 | LTP | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
mmap11 | LTP | mmap11 0 TINFO : [471]
mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01_1 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03_1 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | n/a | n/a | n/a | n/a | n/a | |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1/M4 RC2
total: 39 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
clock_settime03 | NEW | clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument
clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument |
n/a | n/a | ||
readlink03 | NEW | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
sockioctl01 | NEW | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
proc01 | NEW | proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument
proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument |
n/a | n/a | ||
mmap11 | LTP | mmap11 0 TINFO : [471]
mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01_1 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03_1 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | n/a | n/a | n/a | n/a | n/a | |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1/M3
total: 42 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
mmap11 | NEW | mmap11 0 TINFO : [471]
mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
mmap10_2 | NEW | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
mmap10_3 | NEW | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
mmap10_4 | NEW | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
mmap10_5 | NEW | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
ksm01 | NEW | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
ksm01_1 | NEW | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
ksm03 | NEW | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
ksm03_1 | NEW | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
gf02 | growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL : Test failed |
n/a | [bug1138] | |||
gf05 | growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL : Test failed |
n/a | [bug1138] | |||
gf07 | growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL : Test failed |
n/a | [bug1138] | |||
gf09 | growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL : Test failed |
n/a | [bug1138] | |||
gf19 | growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL : Test failed |
n/a | [bug1138] | |||
ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
quota_remount_test01 | mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed | n/a | ||||
ioctl03 | Qemuarm | n/a | n/a | n/a | n/a | |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | NEW | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1/M2
total: 31 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
gf02 | growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL : Test failed |
n/a | [bug1138] | |||
gf05 | growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL : Test failed |
n/a | [bug1138] | |||
gf07 | growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL : Test failed |
n/a | [bug1138] | |||
gf09 | growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL : Test failed |
n/a | [bug1138] | |||
gf19 | growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL : Test failed |
n/a | [bug1138] | |||
ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
quota_remount_test01 | mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed | n/a | ||||
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1/M1
total: 32 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
gf02 | NEW | growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL : Test failed |
n/a | [bug1138] | ||
gf05 | NEW | growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL : Test failed |
n/a | [bug1138] | ||
gf07 | NEW | growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL : Test failed |
n/a | [bug1138] | ||
gf09 | NEW | growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL : Test failed |
n/a | [bug1138] | ||
gf19 | NEW | growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL : Test failed |
n/a | [bug1138] | ||
ld | NEW | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | [bug1162] | ||
quota_remount_test01 | mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed | n/a | ||||
ioctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.0/M4 -RC2
total: 45
- NEW Introduced: 17
- Duplicated: 28
similarity: 28 (62.00%):
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
fchown04 | n/a | n/a | fchown04 1 TBROK : chown(/opt/tmp/ltp-XXXXjXIJS0/fchy8wBtx, -1, 0) failed; errno = 1: Operation not permitted | n/a | n/a | n/a |
fcntl16 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa/.nfs000000000047e62e00000025) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
fcntl16_64 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa/.nfs000000000047e62e00000025) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
fchown04_16 | n/a | n/a | fchown04 1 TBROK : chown(/opt/tmp/ltp-XXXXjXIJS0/fchy8wBtx, -1, 0) failed; errno = 1: Operation not permitted | n/a | n/a | n/a |
fork09 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/forZI4A7w) failed: rmdir(/opt/tmp/ltp-XXXXjXIJS0/forZI4A7w) failed; errno=39: Directory not empty | n/a | n/a | n/a |
inotify02 | n/a | n/a | don't get event: mask=bfc3b270 | n/a | n/a | n/a |
libevent01 | n/a | n/a | sh: /opt/ltp/testcases/bin/libevent/run_libevent.sh: not found | n/a | n/a | n/a |
open10 | n/a | n/a | open10.testdir.B.22779/setgid: Incorrect modes, setgid bit not set | n/a | n/a | n/a |
recvmsg01 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/reca51FYA) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/reca51FYA/.nfs000000000047ea3a00000038) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
sendmsg01 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/senqTfDE6) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/senqTfDE6/.nfs000000000047ea3e0000209d) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
utimensat01 | n/a | n/a | /opt/ltp/testcases/bin/utimensat_tests.sh: exit: line 488: Illegal number: -1 | n/a | n/a | n/a |
openfile01 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/opeSW4SGW) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/opeSW4SGW/.nfs000000000047eab9000020a5) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
quota_remount_test01 | n/a | n/a | mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed | n/a | n/a | n/a |
dio04 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/diopbB3SB) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/diopbB3SB/.nfs000000000047eb7c000020a9) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
dio10 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/dioPqQ0qQ) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/dioPqQ0qQ/.nfs000000000047eb90000020ad) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
mmapstress01 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/mmabR9vuy) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/mmabR9vuy/.nfs000000000047eb98000020d4) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
mmapstress10 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/mmaBuQ5I6) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/mmaBuQ5I6/.nfs000000000047ed29000020d5) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
ioctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
lchown02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
lchown02_16 | qemux86 | n/a | n/a | n/a | n/a | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ldd | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.3 M5 RC2 20120926 build
total: 18 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | PPC doesn't support it | n/a |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.3 M4 RC3 20120916 build
total: 20 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
get_robust_list01 | LTP | n/a | get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly | n/a | It is a LTP bug. Wait for upstream | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | PPC doesn't support it | n/a |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.3 M3 RC2 20120814 build
total: 21 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
get_robust_list01 | LTP | n/a | get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly | n/a | It is a LTP bug. Wait for upstream | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | PPC doesn't support it | n/a |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
proc01 | LTP | n/a | proc01 1 TFAIL : read failed: /proc/sys/kernel/ftrace_enabled: errno=ENODEV(19): No such device | n/a | This is a LTP bug | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.3 20120801 build
total: 24 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
get_robust_list01 | LTP | n/a | get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly | n/a | It is a LTP bug. Wait for upstream | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | PPC doesn't support it | n/a |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
proc01 | LTP | n/a | proc01 1 TFAIL : read failed: /proc/sys/kernel/ftrace_enabled: errno=ENODEV(19): No such device | n/a | This is a LTP bug | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1.2 20120630 build
total: 29 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | n/a | |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
readlink03 | LTP | n/a | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22 | n/a | This is a LTP bug. Has been fixed in upstream. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2.1 20120629 build
total: 22 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
dio24 | NEW | n/a | diotest05 3 TFAIL : readv/writev comparision failed | n/a | It could pass when run again | n/a |
setxattr03 | NAB | n/a | setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument
setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument |
n/a | No xattr support in fs or fs mounted without user_xattr option | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | n/a | |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.3 M1 RC1 20120613 build
total: 30 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
get_robust_list01 | LTP | n/a | get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly | n/a | It is a LTP bug. Wait for upstream | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | n/a | |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | mmap1 caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.3 20120606 build
total: 29 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | n/a | |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | mmap1 caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2 RC5 Denzil
total: 21 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
setxattr03 | NAB | n/a | setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument
setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument |
n/a | No xattr support in fs or fs mounted without user_xattr option | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | n/a | |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2 RC4 Denzil
total: 23 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
sendfile02 | NAB | n/a | sendfile02 2 TBROK : call to bind() failed: Address already in use | n/a | It is not a bug. | n/a |
setxattr03 | NAB | n/a | setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument
setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument |
n/a | No xattr support in fs or fs mounted without user_xattr option | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | n/a | |
ksm05 | LTP | n/a | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory | n/a | It is a LTP bug. | n/a |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2 M4 RC3
total: 21 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
setxattr03 | NAB | n/a | setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument
setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument |
n/a | No xattr support in fs or fs mounted without user_xattr option | n/a |
aio02 | NAB | n/a | io_fsync write: Invalid argument | n/a | io_fsync write: Invalid argument | n/a |
thp02 | NAB | n/a | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo | n/a | n/a | |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
vma01 | LTP | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2 M4 RC2
total: 20 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
readlink03 | LTP | n/a | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22 | n/a | This is a LTP bug. Has been fixed in upstream. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
sched_getaffinity01 | sched_getaffinity01 4 TFAIL : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success | n/a | n/a | |||
vma01 | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | ||
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2 M4 RC1
total: 20 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
readlink03 | LTP | n/a | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22 | n/a | This is a LTP bug. Has been fixed in upstream. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
ksm05 | LTP | n/a | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory | n/a | It is a LTP bug. | n/a |
vma01 | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | ||
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2 M3 RC1
total: 20 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
getrusage03 | NAB | n/a | getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
readlink03 | LTP | n/a | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22 | n/a | This is a LTP bug. Has been fixed in upstream. | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | NAB | n/a | main(): mmap(): Cannot allocate memory | n/a | Not enough memory. Mpc8315e-rdb have 128M memory. | n/a |
mmapstress06 | qemux86 | mmapstress06: errno = 12; large mmap failed
for this test to run, it needs a mmap space of 32769 pages |
n/a | n/a | n/a | |
ksm05 | LTP | n/a | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory | n/a | It is a LTP bug. | n/a |
vma01 | n/a | vma01 1 TBROK : no matched s = 0x40072000 found.
vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | [bug1924] | ||
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ld | LTP | n/a | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1.1
total: 41 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
fork13 | fork13 1 TFAIL : Wait return value: expected pid=9129, got 22911, iteration 998600. | n/a | n/a | |||
sched_getaffinity01 | sched_getaffinity01 4 TFAIL : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success | n/a | n/a | |||
clock_settime03 | LTP | clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument
clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument |
n/a | introduced with 3.0 kernel | n/a | |
proc01 | LTP | proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument
proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument |
n/a | /proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0 | n/a | |
readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
sockioctl01 | LTP | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
mmap11 | LTP | mmap11 0 TINFO : [471]
mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01_1 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03_1 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | n/a | n/a | n/a | n/a | n/a | |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2 M2 RC1
total: 31 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
nm | NEW | -------System test for nm command------
nm: nmfile1.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm -A: FAIL |
n/a | n/a | ||
ldd | NEW | /usr/lib/gcc/powerpc-poky-linux/4.6.3/../../../crt1.o:(.rodata+0x4): undefined reference to `main'
collect2: ld returned 1 exit status ASSERTION 1 ldd: /tmp/ldd01-23462/a.out: No such file or directory ASSERTION #1 FAIL |
n/a | n/a | ||
vma01 | vma01 0 TINFO : t = 0x40002000
vma01 0 TINFO : v = 0x40103000 u = 0x40005000 vma01 0 TINFO : s = 0x40005000, t = 0x40008000 vma01 1 TBROK : no matched s = 0x40008000 found. vma01 2 TBROK : Remaining cases broken vma01 0 TINFO : t = 0x40002000 vma01 0 TINFO : v = 0x40103000 vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | n/a | |||
getrusage03 | getrusage03 0 TINFO : allocate 100MB
getrusage03 1 TBROK : malloc failed at getrusage03.c:344: errno=ENOMEM(12): Cannot allocate memory getrusage03 2 TBROK : Remaining cases broken |
n/a | Not enough memory. Mpc8315e-rdb only have 128M memory. | n/a | ||
ksm05 | LTP | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory | n/a | It is a LTP bug. | n/a | |
clock_settime03 | LTP | clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument
clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument |
n/a | introduced with 3.0 kernel | n/a | |
proc01 | LTP | proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument
proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument |
n/a | /proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0 | n/a | |
readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
sockioctl01 | LTP | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2 M1 RC2
total: 38 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
vma01 | vma01 0 TINFO : t = 0x40002000
vma01 0 TINFO : v = 0x40103000 u = 0x40005000 vma01 0 TINFO : s = 0x40005000, t = 0x40008000 vma01 1 TBROK : no matched s = 0x40008000 found. vma01 2 TBROK : Remaining cases broken vma01 0 TINFO : t = 0x40002000 vma01 0 TINFO : v = 0x40103000 vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken |
n/a | n/a | |||
getrusage03 | getrusage03 0 TINFO : allocate 100MB
getrusage03 1 TBROK : malloc failed at getrusage03.c:344: errno=ENOMEM(12): Cannot allocate memory getrusage03 2 TBROK : Remaining cases broken |
n/a | Not enough memory. Mpc8315e-rdb only have 128M memory. | n/a | ||
ksm05 | LTP | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory | n/a | It is a LTP bug. | n/a | |
sched_getaffinity01 | sched_getaffinity01 4 TFAIL : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success | n/a | n/a | |||
clock_settime03 | LTP | clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument
clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument |
n/a | introduced with 3.0 kernel | n/a | |
proc01 | LTP | proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument
proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument |
n/a | /proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0 | n/a | |
readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
sockioctl01 | LTP | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | n/a | n/a | n/a | n/a | n/a | |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.0.2
total: 36 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
mmap11 | LTP | mmap11 0 TINFO : [471]
mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01_1 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03_1 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
quota_remount_test01 | mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed | n/a | ||||
ioctl03 | Qemuarm | n/a | n/a | n/a | n/a | |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | n/a | n/a | n/a | n/a | n/a | |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1/M4 RC4
total: 39 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
clock_settime03 | clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument
clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument |
n/a | introduced with 3.0 kernel | n/a | ||
proc01 | proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument
proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument |
n/a | /proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0 | n/a | ||
readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
sockioctl01 | LTP | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
mmap11 | LTP | mmap11 0 TINFO : [471]
mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01_1 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03_1 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | n/a | n/a | n/a | n/a | n/a | |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1/M4 RC3
total: 39 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
clock_settime03 | clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument
clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument |
n/a | introduced with 3.0 kernel | n/a | ||
proc01 | proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument
proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument |
n/a | introduced with 3.0 kernel | n/a | ||
readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
sockioctl01 | LTP | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
mmap11 | LTP | mmap11 0 TINFO : [471]
mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01_1 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03_1 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | n/a | n/a | n/a | n/a | n/a | |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1/M4 RC2
total: 39 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
clock_settime03 | NEW | clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument
clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument |
n/a | n/a | ||
readlink03 | NEW | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
sockioctl01 | NEW | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
proc01 | NEW | proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument
proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument |
n/a | n/a | ||
mmap11 | LTP | mmap11 0 TINFO : [471]
mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm01_1 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ksm03_1 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug. | n/a | |
ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | n/a | n/a | n/a | n/a | n/a | |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1/M3
total: 42 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
mmap11 | NEW | mmap11 0 TINFO : [471]
mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
mmap10_2 | NEW | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
mmap10_3 | NEW | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
mmap10_4 | NEW | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
mmap10_5 | NEW | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
ksm01 | NEW | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
ksm01_1 | NEW | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
ksm03 | NEW | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
ksm03_1 | NEW | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | n/a | n/a | |
gf02 | growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL : Test failed |
n/a | [bug1138] | |||
gf05 | growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL : Test failed |
n/a | [bug1138] | |||
gf07 | growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL : Test failed |
n/a | [bug1138] | |||
gf09 | growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL : Test failed |
n/a | [bug1138] | |||
gf19 | growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL : Test failed |
n/a | [bug1138] | |||
ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
quota_remount_test01 | mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed | n/a | ||||
ioctl03 | Qemuarm | n/a | n/a | n/a | n/a | |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog06 | NEW | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1/M2
total: 31 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
gf02 | growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL : Test failed |
n/a | [bug1138] | |||
gf05 | growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL : Test failed |
n/a | [bug1138] | |||
gf07 | growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL : Test failed |
n/a | [bug1138] | |||
gf09 | growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL : Test failed |
n/a | [bug1138] | |||
gf19 | growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL : Test failed |
n/a | [bug1138] | |||
ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
quota_remount_test01 | mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed | n/a | ||||
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1/M1
total: 32 (100%)
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
gf02 | NEW | growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL : Test failed |
n/a | [bug1138] | ||
gf05 | NEW | growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL : Test failed |
n/a | [bug1138] | ||
gf07 | NEW | growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL : Test failed |
n/a | [bug1138] | ||
gf09 | NEW | growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL : Test failed |
n/a | [bug1138] | ||
gf19 | NEW | growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002
growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL : Test failed |
n/a | [bug1138] | ||
ld | NEW | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | [bug1162] | ||
quota_remount_test01 | mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed | n/a | ||||
ioctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | caught unexpected signal - 11 --- exiting | n/a | ||
mtest06_2 | blacksand | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.0/M4 -RC2
total: 45
- NEW Introduced: 17
- Duplicated: 28
similarity: 28 (62.00%):
LTP cases | status | owner | error msg | lsb | comment | bugzilla |
fchown04 | n/a | n/a | fchown04 1 TBROK : chown(/opt/tmp/ltp-XXXXjXIJS0/fchy8wBtx, -1, 0) failed; errno = 1: Operation not permitted | n/a | n/a | n/a |
fcntl16 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa/.nfs000000000047e62e00000025) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
fcntl16_64 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa/.nfs000000000047e62e00000025) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
fchown04_16 | n/a | n/a | fchown04 1 TBROK : chown(/opt/tmp/ltp-XXXXjXIJS0/fchy8wBtx, -1, 0) failed; errno = 1: Operation not permitted | n/a | n/a | n/a |
fork09 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/forZI4A7w) failed: rmdir(/opt/tmp/ltp-XXXXjXIJS0/forZI4A7w) failed; errno=39: Directory not empty | n/a | n/a | n/a |
inotify02 | n/a | n/a | don't get event: mask=bfc3b270 | n/a | n/a | n/a |
libevent01 | n/a | n/a | sh: /opt/ltp/testcases/bin/libevent/run_libevent.sh: not found | n/a | n/a | n/a |
open10 | n/a | n/a | open10.testdir.B.22779/setgid: Incorrect modes, setgid bit not set | n/a | n/a | n/a |
recvmsg01 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/reca51FYA) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/reca51FYA/.nfs000000000047ea3a00000038) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
sendmsg01 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/senqTfDE6) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/senqTfDE6/.nfs000000000047ea3e0000209d) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
utimensat01 | n/a | n/a | /opt/ltp/testcases/bin/utimensat_tests.sh: exit: line 488: Illegal number: -1 | n/a | n/a | n/a |
openfile01 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/opeSW4SGW) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/opeSW4SGW/.nfs000000000047eab9000020a5) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
quota_remount_test01 | n/a | n/a | mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed | n/a | n/a | n/a |
dio04 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/diopbB3SB) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/diopbB3SB/.nfs000000000047eb7c000020a9) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
dio10 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/dioPqQ0qQ) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/dioPqQ0qQ/.nfs000000000047eb90000020ad) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
mmapstress01 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/mmabR9vuy) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/mmabR9vuy/.nfs000000000047eb98000020d4) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
mmapstress10 | n/a | n/a | tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/mmaBuQ5I6) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/mmaBuQ5I6/.nfs000000000047ed29000020d5) failed; errno=16: Device or resource busy | n/a | n/a | n/a |
ioctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
lchown02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
lchown02_16 | qemux86 | n/a | n/a | n/a | n/a | n/a |
sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mtest06_2 | qemux86 | n/a | n/a | n/a | n/a | n/a |
mmapstress06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
ldd | qemux86 | n/a | n/a | n/a | n/a | n/a |
su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
file | qemux86 | n/a | n/a | n/a | n/a | n/a |
cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |