|
|
| (One intermediate revision by the same user not shown) |
| Line 1: |
Line 1: |
| == Checklist for setting up autobuilders ==
| | Obsolete page - Contents cleared - Can be removed |
| | |
| # Fresh OS install (minimal X window profile)
| |
| # Make sure NFS is mounted and idmapd is working properly.
| |
| # Set firewall to allow connections from qemu sanity tests
| |
| # Setup any needed proxies.
| |
| ## Including git-proxy if needed. You'll test your proxies below.
| |
| # Run [https://www.yoctoproject.org/docs/current/yocto-project-qs/yocto-project-qs.html relevant yum, apt-get, or zypper command from the packages section of the quick start guidde]
| |
| # Install vncserver and if needed python-zope.interfaces
| |
| # Add a pokybuild user
| |
| # echo "source /opt/poky/1.5/environment-setup-x86_64-pokysdk-linux" >> /home/pokybuild/.bashrc
| |
| # git clone http://git.yoctoproject.org/git/yocto-autobuilder /home/pokybuild/yocto-autobuilder
| |
| # git clone git clone git://git.yoctoproject.org/poky /root/poky
| |
| # Install a [http://downloads.yoctoproject.org/releases/yocto/yocto-1.5.1/toolchain/x86_64/poky-eglibc-x86_64-core-image-sato-x86_64-toolchain-1.5.1.sh toolchain] at /opt/poky
| |
| # Install an [http://downloads.yoctoproject.org/releases/yocto/yocto-1.5.1/buildtools/poky-eglibc-x86_64-buildtools-tarball-i586-buildtools-nativesdk-standalone-1.5.sh SDK] at the default /opt/poky/1.5
| |
| # echo "cd /root/poky/scripts/; ./runqemu-gen-tapdevs 1006 100 32 /opt/poky/sysroots/x86_64-pokysdk-linux/" >> /etc/rc.local (or /etc/rc.d/after.local or equivalent.)
| |
| # echo "/bin/su - pokybuild -c "/usr/bin/vncserver" >> /etc/rc.local (or /etc/rc.d/after.local or equivalent.)
| |
| # Execute /etc/rc.local file to test it. Set your vnc server password
| |
| # su - pokybuild
| |
| # Run which python and make sure your python is in /opt
| |
| # cd yocto-autobuilder and configure config/autobuilder.conf yocto-slave/buildbot.tac yocto-master/master.cfg (maybe yocto-slave/twistd.hostname)
| |
| # dot-source: ". yocto-autobuilder-setup" (touch .setupdone if needed)
| |
| # ./yocto-start-autobuilder slave
| |
| | |
| Watch /tmp on the first build and make sure it isn't filling up. Missed configuration changes with default to /tmp.
| |
