Mpc8315e-rdb-ltp: Difference between revisions

Latest revision as of 03:40, 9 April 2020

3.0 RC2 build

total: 9

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03 1 TBROK : safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315-rdb only has 128MB memory.
msgstress03	NAB	msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
mem02	NAB	mem02 1 TFAIL : mem02.c:102: calloc - alloc of 64MB failed	Not enough free memory. MPC8315-rdb only has 128MB memory.
mmapstress06	NAB	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	Not enough free memory. MPC8315-rdb only has 128MB memory.
vma05	LTP	TFAIL: [vdso] bug not patched	https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html
max_map_count		tst_test.c:817: BROK: Test haven't reported results!	PASS when run this case respectively
float_exp_log		TINFO : thread 27 (log) terminated successfully 500 loops sh: line 1: 16611 Killed float_exp_log -v
unshare01_sh	NAB	unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.7 RC2 build

total: 10

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03 1 TBROK : safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315-rdb only has 128MB memory.
msgstress03	NAB	msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
msgstress04	NAB	msgstress04 1 TFAIL : msgstress04.c:220: Child exit status = 1
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
mtest06	NAB	mmap1.c:191: BROK: mmap((nil),67108864,3,34,-1,0) failed: ENOMEM	Not enough free memory. MPC8315-rdb only has 128MB memory.
mem02	NAB	mem02 1 TFAIL : mem02.c:102: calloc - alloc of 64MB failed	Not enough free memory. MPC8315-rdb only has 128MB memory.
mmapstress06	NAB	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	Not enough free memory. MPC8315-rdb only has 128MB memory.
vma05	LTP	TFAIL: [vdso] bug not patched	https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html
max_map_count		tst_test.c:817: BROK: Test haven't reported results!	PASS when run this case respectively
unshare01_sh	NAB	unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.7 M3 RC1 build

total: 13

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03 1 TBROK : safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315-rdb only has 128MB memory.
msgstress03	NAB	msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
msgstress04	NAB	msgstress04 1 TFAIL : msgstress04.c:220: Child exit status = 1
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
mtest05		map_and_thread(): mmap(): Cannot allocate memory mmstress 4 TFAIL : mmstress.c:625: TEST 4 Failed
mtest06	NAB	mmap1.c:191: BROK: mmap((nil),67108864,3,34,-1,0) failed: ENOMEM	Not enough free memory. MPC8315-rdb only has 128MB memory.
mtest06_3		tst_test.c:1126: BROK: Test killed! (timeout?)
mem02	NAB	mem02 1 TFAIL : mem02.c:102: calloc - alloc of 64MB failed	Not enough free memory. MPC8315-rdb only has 128MB memory.
mmapstress06	NAB	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	Not enough free memory. MPC8315-rdb only has 128MB memory.
vma05	LTP	TFAIL: [vdso] bug not patched	https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html
max_map_count		tst_test.c:817: BROK: Test haven't reported results!	PASS when run this case respectively
float_bessel		sh: line 1: 23454 Killed float_bessel -v
unshare01_sh	NAB	unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.7 M2 RC1 build

total: 10

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03 1 TBROK : safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315-rdb only has 128MB memory.
inotify09	NEW	tst_test.c:1072: INFO: Timeout per run is 0h 05m 00s Test timeouted, sending SIGKILL!
msgstress03	NAB	msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
mmapstress06	NAB	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	Not enough free memory. MPC8315-rdb only has 128MB memory.
vma05	NEW	TFAIL: [vdso] bug not patched
max_map_count		tst_test.c:817: BROK: Test haven't reported results!	PASS when run this case respectively
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01	NAB	ld01 3 TFAIL: Failed to build shared library	file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug.

2.7 M1 RC1 build

total: 10

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03 1 TBROK : safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315-rdb only has 128MB memory.
inotify09	NEW	tst_test.c:1072: INFO: Timeout per run is 0h 05m 00s Test timeouted, sending SIGKILL!
msgstress03	NAB	msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
mmapstress06	NAB	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	Not enough free memory. MPC8315-rdb only has 128MB memory.
vma05	NEW	TFAIL: [vdso] bug not patched
max_map_count		tst_test.c:817: BROK: Test haven't reported results!	PASS when run this case respectively
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01	NAB	ld01 3 TFAIL: Failed to build shared library	file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug.

2.6 RC1 build

total: 11

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03 1 TBROK : safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315-rdb only has 128MB memory.
mprotect04	NEW	mprotect04 2 TBROK : mprotect04.c:293: received an unexpected signal: 4
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
mmapstress06	NAB	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	Not enough free memory. MPC8315-rdb only has 128MB memory.
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled	KSM configuration is not enabled
vma05	NEW	TFAIL: [vdso] bug not patched
max_map_count		tst_test.c:817: BROK: Test haven't reported results!	PASS when run this case respectively
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01	NAB	ld01 3 TFAIL: Failed to build shared library	file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug.

2.6 M3 RC1 build

total: 14

LTP cases	status	error msg	comment	bugzilla
fcntl36	NEW	fcntl36.c:276: FAIL: Unexpected data offset 5160 value 102
getrusage03	NAB	getrusage03 1 TBROK : safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315-rdb only has 128MB memory.
mprotect04	NEW	mprotect04 2 TBROK : mprotect04.c:293: received an unexpected signal: 4
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
sigwaitinfo01	LTP	sigwaitinfo01 7 TFAIL : sigwaitinfo01.c:386: Unrecognised child exit code	LTP fixed in commit 4926a47b538060e07bf7a7d36dec5a0c07b7ce9b
mmapstress06	NAB	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	Not enough free memory. MPC8315-rdb only has 128MB memory.
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled	KSM configuration is not enabled
vma05	NEW	TFAIL: [vdso] bug not patched
max_map_count		tst_test.c:817: BROK: Test haven't reported results!	PASS when run this case respectively
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01	NAB	ld01 3 TFAIL: Failed to build shared library	file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug.
unshare01	NAB	TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.6 M2 RC1 build

total: 11

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03 1 TBROK : safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315-rdb only has 128MB memory.
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
mmapstress06	NAB	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	Not enough free memory. MPC8315-rdb only has 128MB memory.
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled	KSM configuration is not enabled
vma05	NEW	TFAIL: [vdso] bug not patched
max_map_count		tst_test.c:817: BROK: Test haven't reported results!	PASS when run this case respectively
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01	NAB	ld01 3 TFAIL: Failed to build shared library	file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug.
unshare01	NAB	TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.6 M1 RC1 build

total: 11

LTP cases	status	error msg	comment	bugzilla
fcntl36	NEW	fcntl36.c:265: FAIL: Unexpected data offset 4372 value 41
getrusage03	NAB	getrusage03 1 TBROK : safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315-rdb only has 128MB memory.
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
mmapstress06	NAB	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	Not enough free memory. MPC8315-rdb only has 128MB memory.
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled	KSM configuration is not enabled
vma05	NEW	TFAIL: [vdso] bug not patched
max_map_count		tst_test.c:817: BROK: Test haven't reported results!	PASS when run this case respectively
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
unshare01	NAB	TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.5 RC1 build

total: 13

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03 1 TBROK : safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315-rdb only has 128MB memory.
mprotect04	NEW	mprotect04 2 TBROK : mprotect04.c:260: received an unexpected signal: 4
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
mmapstress06	NAB	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	Not enough free memory. MPC8315-rdb only has 128MB memory.
ksm03	NAB	mksm03.c:71: CONF: KSM configuration is not enabled	KSM configuration is not enabled
ksm03_1	NAB	mksm03.c:71: CONF: KSM configuration is not enabled	KSM configuration is not enabled
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled	KSM configuration is not enabled
vma05	NEW	TFAIL: [vdso] bug not patched
max_map_count		tst_test.c:817: BROK: Test haven't reported results!	PASS when run this case respectively
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
unshare01	NAB	TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.5 M3 RC1 build

total: 13

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03 1 TBROK : safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315-rdb only has 128MB memory.
keyctl06	NAB	keyctl06.c:68: FAIL: KEYCTL_READ returned 4 but expected 8	This case is for regression test for kernel commits e645016abc80 and 3239b6f29bdf which were introduced by kernel 4.14. It would fail on 4.12 kernel.
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
mmapstress06	NAB	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	Not enough free memory. MPC8315-rdb only has 128MB memory.
ksm03	NAB	mksm03.c:71: CONF: KSM configuration is not enabled	KSM configuration is not enabled
ksm03_1	NAB	mksm03.c:71: CONF: KSM configuration is not enabled	KSM configuration is not enabled
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled	KSM configuration is not enabled
vma05	NEW	TFAIL: [vdso] bug not patched
max_map_count		tst_test.c:817: BROK: Test haven't reported results!	PASS when run this case respectively
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
unshare01	NAB	TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.5 M2 RC1 build

total: 13

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03 1 TBROK : safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315-rdb only has 128MB memory.
fanotify06	LTP	tst_test.c:1025: BROK: Test killed by SIGSEGV!	LTP bug. Upstream had fixed it.
keyctl06	NAB	keyctl06.c:68: FAIL: KEYCTL_READ returned 4 but expected 8	This case is for regression test for kernel commits e645016abc80 and 3239b6f29bdf which were introduced by kernel 4.14. It would fail on 4.12 kernel.
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
mmapstress06	NAB	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	Not enough free memory. MPC8315-rdb only has 128MB memory.
ksm03	NAB	mksm03.c:71: CONF: KSM configuration is not enabled	KSM configuration is not enabled
ksm03_1	NAB	mksm03.c:71: CONF: KSM configuration is not enabled	KSM configuration is not enabled
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled	KSM configuration is not enabled
max_map_count		tst_test.c:817: BROK: Test haven't reported results!	PASS when run this case respectively
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
unshare01	NAB	TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.5 M1 RC3 build

total: 13

LTP cases	status	error msg	comment	bugzilla
add_key03		add_key03.c:86: FAIL: created user keyring for another user
fcntl36	NEW	fcntl36.c:265: FAIL: Unexpected data offset 9592 value 175
getrusage03	NAB	getrusage03 1 TBROK : safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
keyctl06		keyctl06.c:50: FAIL: KEYCTL_READ overran the buffer
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y
mmapstress06	NAB	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
ksm03	NAB	mksm03.c:71: CONF: KSM configuration is not enabled
ksm03_1	NAB	mksm03.c:71: CONF: KSM configuration is not enabled
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled
max_map_count		tst_test.c:817: BROK: Test haven't reported results!
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.

2.5 M1 RC1 build

total: 15

LTP cases	status	error msg	comment	bugzilla
add_key03	NEW	add_key03.c:86: FAIL: created user keyring for another user
getrusage03	NAB	getrusage03 1 TBROK : safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
keyctl06	NEW	keyctl06.c:50: FAIL: KEYCTL_READ overran the buffer
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y
mmapstress06	NAB	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
ksm03	NAB	mksm03.c:71: CONF: KSM configuration is not enabled
ksm03_1	NAB	mksm03.c:71: CONF: KSM configuration is not enabled
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled
max_map_count		tst_test.c:817: BROK: Test haven't reported results!
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_allow01	LTP	(2) TEST THAT PERSON NOT IN /var/spool/cron/allow IS NOT ABLE TO RUN JOB. Cron allowed user to execute test job, TEST FAILED	The test case specifies /var/spool/cron/allow and /var/spool/cron/deny as the default configure, but in Yocto, we use /etc/cron.allow and /etc/cron.deny. Modify the test script before testing.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ar		ar: `u' modifier ignored since `D' is the default (see `U') 14 TFAIL: ar haven't updated modified file0 (-u)	Already sent a patch to oe
tar01		tar: invalid option -- 'd' 1 TFAIL: tar dvf test.tar > tar.out failed unexpectedly	Busybox tar doesn't have 'd' option. Need to install tar package

2.4 RC3 build

total: 29

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled.	kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).	Upstream have already remove the corresponding case: https://github.com/linux-test-project/ltp/commit/259db6fed55f88ab32a0875e66803eee44d298be
shmat01	LTP	shmat01.c:118: FAIL: shared memory address was not correct	LTP had a fix in master
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
ksm03	NEW	mksm03.c:71: CONF: KSM configuration is not enabled
ksm03_1	NEW	mksm03.c:71: CONF: KSM configuration is not enabled
ksm05	NEW	ksm05.c:98: CONF: KSM configuration is not enabled
thp01	NEW	tst_test.c:908: INFO: Timeout per run is 0h 05m 00s execvp: Argument list too long	LTP had a fix for this issue in master
max_map_count	NEW	tst_test.c:785: BROK: Test haven't reported results!
su01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01		cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed	image shuold install ltp-staticdev
tar01		tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly	Busybox tar has different behavior
df01_ext2		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]	stat from busybox is missing some options
df01_ext3		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ext4		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_xfs		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_vfat		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_exfat		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ntfs		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
mkfs01		1 TFAIL: 'mkfs /dev/loop0 ' failed.	no loop device, I have test it for another /dev/sd* is OK
mkfs01_ext2		1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext3		1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext4		1 TFAIL: 'mkfs /dev/loop0 ' failed.

2.4 RC2 build

total: 30

LTP cases	status	error msg	comment	bugzilla
fsync02		fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 278.000000 seconds; max_block: 119463; data_blocks: 384
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled.	kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).	Upstream have already remove the corresponding case: https://github.com/linux-test-project/ltp/commit/259db6fed55f88ab32a0875e66803eee44d298be
shmat01	LTP	shmat01.c:118: FAIL: shared memory address was not correct	LTP had a fix in master
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
ksm03	NEW	mksm03.c:71: CONF: KSM configuration is not enabled
ksm03_1	NEW	mksm03.c:71: CONF: KSM configuration is not enabled
ksm05	NEW	ksm05.c:98: CONF: KSM configuration is not enabled
thp01	NEW	tst_test.c:908: INFO: Timeout per run is 0h 05m 00s execvp: Argument list too long	LTP had a fix for this issue in master
max_map_count	NEW	tst_test.c:785: BROK: Test haven't reported results!
su01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01		cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed	image shuold install ltp-staticdev
tar01		tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly	Busybox tar has different behavior
df01_ext2		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]	stat from busybox is missing some options
df01_ext3		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ext4		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_xfs		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_vfat		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_exfat		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ntfs		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
mkfs01		1 TFAIL: 'mkfs /dev/loop0 ' failed.	no loop device, I have test it for another /dev/sd* is OK
mkfs01_ext2		1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext3		1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext4		1 TFAIL: 'mkfs /dev/loop0 ' failed.

2.4 RC1 build

total: 31

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory	Before run the ltp, we should add the tun device: modprobe tun
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled.	kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).	Upstream have already remove the corresponding case: https://github.com/linux-test-project/ltp/commit/259db6fed55f88ab32a0875e66803eee44d298be
shmat01	LTP	shmat01.c:118: FAIL: shared memory address was not correct	LTP had a fix in master
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mtest06_3		tst_test.c:958: INFO: If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1 tst_test.c:959: BROK: Test killed! (timeout?)
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
ksm03	NEW	mksm03.c:71: CONF: KSM configuration is not enabled
ksm03_1	NEW	mksm03.c:71: CONF: KSM configuration is not enabled
ksm05	NEW	ksm05.c:98: CONF: KSM configuration is not enabled
thp01	NEW	tst_test.c:908: INFO: Timeout per run is 0h 05m 00s execvp: Argument list too long	LTP had a fix for this issue in master
max_map_count	NEW	tst_test.c:785: BROK: Test haven't reported results!
su01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01		cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed	image shuold install ltp-staticdev
tar01		tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly	Busybox tar has different behavior
df01_ext2		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]	stat from busybox is missing some options
df01_ext3		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ext4		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_xfs		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_vfat		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_exfat		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ntfs		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
mkfs01		1 TFAIL: 'mkfs /dev/loop0 ' failed.	no loop device, I have test it for another /dev/sd* is OK
mkfs01_ext2		1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext3		1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext4		1 TFAIL: 'mkfs /dev/loop0 ' failed.

2.4 M3 RC1 build

total: 31

LTP cases	status	error msg	comment	bugzilla
add_key02		add_key02.c:98: FAIL: unexpected error with key type 'user': EINVAL	This is a kernel bug, failed on kernel older than 4.12-rc5: https://github.com/linux-test-project/ltp/commit/25045624e941ee76a13febd36187e23c6c435507
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory	Before run the ltp, we should add the tun device: modprobe tun
mprotect04	NEW	mprotect04 2 TBROK : mprotect04.c:260: received an unexpected signal: 4
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled.	kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).	Upstream have already remove the corresponding case: https://github.com/linux-test-project/ltp/commit/259db6fed55f88ab32a0875e66803eee44d298be
shmat01 shmat01	NEW	shmat01.c:118: FAIL: shared memory address was not correct
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
ksm03	NEW	mksm03.c:71: CONF: KSM configuration is not enabled
ksm03_1	NEW	mksm03.c:71: CONF: KSM configuration is not enabled
ksm05	NEW	ksm05.c:98: CONF: KSM configuration is not enabled
max_map_count	NEW	tst_test.c:785: BROK: Test haven't reported results!
su01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01		cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed	image shuold install ltp-staticdev
tar01		tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly	Busybox tar has different behavior
df01_ext2		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]	stat from busybox is missing some options
df01_ext3		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ext4		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_xfs		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_vfat		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_exfat		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ntfs		stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
mkfs01		1 TFAIL: 'mkfs /dev/loop0 ' failed.	no loop device, I have test it for another /dev/sd* is OK
mkfs01_ext2		1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext3		1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext4		1 TFAIL: 'mkfs /dev/loop0 ' failed.

2.4 M2 RC3 build

total: 30

LTP cases	status	error msg	comment	bugzilla
add_key02	NEW	add_key02.c:98: FAIL: unexpected error with key type 'user': EINVAL	This is a kernel bug, failed on kernel older than 4.12-rc5: https://github.com/linux-test-project/ltp/commit/25045624e941ee76a13febd36187e23c6c435507
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory	Before run the ltp, we should add the tun device: modprobe tun
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled.	kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).	Upstream have already remove the corresponding case: https://github.com/linux-test-project/ltp/commit/259db6fed55f88ab32a0875e66803eee44d298be
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
su01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
at_deny01		Can't open /var/run/atd.pid to signal atd. No atd running?
ar		ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01		cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed	image shuold install ltp-staticdev
file01		file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory)	Fixed
tar01		tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly	Busybox tar has different behavior
df01_ext2	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]	stat from busybox is missing some options
df01_ext3	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ext4	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_xfs	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_vfat	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_exfat	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ntfs	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
mkfs01	NEW	1 TFAIL: 'mkfs /dev/loop0 ' failed.	no loop device, I have test it for another /dev/sd* is OK
mkfs01_ext2	NEW	1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext3	NEW	1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext4	NEW	1 TFAIL: 'mkfs /dev/loop0 ' failed.

2.4 M2 RC2 build

total: 30

LTP cases	status	error msg	comment	bugzilla
add_key02	NEW	add_key02.c:98: FAIL: unexpected error with key type 'user': EINVAL	This is a kernel bug, failed on kernel older than 4.12-rc5: https://github.com/linux-test-project/ltp/commit/25045624e941ee76a13febd36187e23c6c435507
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory	Before run the ltp, we should add the tun device: modprobe tun
mprotect04	NEW	improtect04 2 TBROK : mprotect04.c:260: received an unexpected signal: 4
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
msgctl11		msgctl11 1 TFAIL : msgctl11.c:220: Child exit status = 1
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled.	kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
dio30	NEW	diotest06 1 TFAIL : diotest6.c:316: Read with Direct IO, Write without
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
su01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
at_deny01		Can't open /var/run/atd.pid to signal atd. No atd running?
ar		ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01		cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
file01		file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory)
tar01		tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly	Busybox tar has different behavior
df01_ext2	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ext3	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ext4	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_xfs	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_vfat	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_exfat	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ntfs	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
mkfs01	NEW	1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext2	NEW	1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext3	NEW	1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext4	NEW	1 TFAIL: 'mkfs /dev/loop0 ' failed.

2.4 M1 RC1 build

total: 30

LTP cases	status	error msg	comment	bugzilla
faccessat01		faccessat01 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15279).
fchmodat01		fchmodat01 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15306).
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
mprotect04	NEW	improtect04 2 TBROK : mprotect04.c:260: received an unexpected signal: 4
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled.	quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
dio30	NEW	diotest06 1 TFAIL : diotest6.c:316: Read with Direct IO, Write without
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
su01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
at_deny01		Can't open /var/run/atd.pid to signal atd. No atd running?
ar		ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01		cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
file01		file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory)
tar01		tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly	Busybox tar has different behavior
df01_ext2	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ext3	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ext4	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_xfs	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_vfat	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_exfat	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ntfs	NEW	stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
mkfs01	NEW	1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext2	NEW	1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext3	NEW	1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext4	NEW	1 TFAIL: 'mkfs /dev/loop0 ' failed.

2.3 RC2 build

total: 18

LTP cases	status	error msg	comment	bugzilla
faccessat01		faccessat01 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15279).
fchmodat01		fchmodat01 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15306).
fsync02	NAB	fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 264.000000 seconds; max_block: 214375; data_blocks: 384
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled.	quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).
utimensat01		utimensat01 55 TFAIL : FAILED test 55
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
su01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01		cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
file01		file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory)
tar01		tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly	Busybox tar has different behavior

2.3 M3 RC2 build

total: 18

LTP cases	status	error msg	comment	bugzilla
faccessat01	NEW	faccessat01 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15279).
fchmodat01	NEW	fchmodat01 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15306).
fsync02	NAB	fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 264.000000 seconds; max_block: 214375; data_blocks: 384
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled.	quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).
utimensat01		utimensat01 55 TFAIL : FAILED test 55
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
su01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01	NEW	cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
file01		file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory)
tar01		tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly	Busybox tar has different behavior

2.3 M2 RC3 build

total: 38

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
mprotect04		mprotect04 2 TBROK : mprotect04.c:246: received an unexpected signal: 4
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
pwritev01_64		pwritev01 3 TFAIL : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202	renameat202 1 TFAIL : renameat202.c:161: renameat2() didn't swap the content of the two files
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15036).
utimensat01		utimensat01 55 TFAIL : FAILED test 55
writev01		writev01 4 TFAIL : writev01.c:204: writev failed unexpectedly: errno=EFAULT(14): Bad address
writev03		writev03 1 TFAIL : writev03.c:145: Got EFAULT
writev04		writev04 1 TFAIL : writev04.c:164: Got error EFAULT
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		FAIL - ar with -u flag failed
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86
df01_ext2		stat: invalid option -- '-'	stat from busybox is missing some options
df01_ext3		df01 1 TBROK : mkfs.ext3 /dev/loop0 failed
df01_ext4		stat: invalid option -- '-'	stat from busybox is missing some options
mkfs01		mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed
mkfs01_ext2		mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed.
mkfs01_ext3		mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed.
mkfs01_ext4		mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed.
which01		which01 1 TFAIL : 'which pname' failed, not expected.

2.3 M1 RC1 build

total: 36

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
pwritev01_64		pwritev01 3 TFAIL : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202	NEW	renameat202 1 TFAIL : renameat202.c:161: renameat2() didn't swap the content of the two files
utimensat01		utimensat01 55 TFAIL : FAILED test 55
writev01		writev01 4 TFAIL : writev01.c:204: writev failed unexpectedly: errno=EFAULT(14): Bad address
writev03		writev03 1 TFAIL : writev03.c:145: Got EFAULT
writev04		writev04 1 TFAIL : writev04.c:164: Got error EFAULT
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		FAIL - ar with -u flag failed
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86
df01_ext2		stat: invalid option -- '-'	stat from busybox is missing some options
df01_ext3		df01 1 TBROK : mkfs.ext3 /dev/loop0 failed
df01_ext4		stat: invalid option -- '-'	stat from busybox is missing some options
mkfs01		mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed
mkfs01_ext2		mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed.
mkfs01_ext3		mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed.
mkfs01_ext4		mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed.
which01		which01 1 TFAIL : 'which pname' failed, not expected.

2.2 RC4 build

total: 35

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
pwritev01_64		pwritev01 3 TFAIL : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
utimensat01		utimensat01 55 TFAIL : FAILED test 55
writev01		writev01 4 TFAIL : writev01.c:204: writev failed unexpectedly: errno=EFAULT(14): Bad address
writev03		writev03 1 TFAIL : writev03.c:145: Got EFAULT
writev04		writev04 1 TFAIL : writev04.c:164: Got error EFAULT
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		FAIL - ar with -u flag failed
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86
df01_ext2		stat: invalid option -- '-'	stat from busybox is missing some options
df01_ext3		df01 1 TBROK : mkfs.ext3 /dev/loop0 failed
df01_ext4		stat: invalid option -- '-'	stat from busybox is missing some options
mkfs01		mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed
mkfs01_ext2		mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed.
mkfs01_ext3		mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed.
mkfs01_ext4		mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed.
which01		which01 1 TFAIL : 'which pname' failed, not expected.

2.2 M3 RC1 build

total: 33

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
pwritev01_64		pwritev01 3 TFAIL : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202		renameat202 1 TFAIL : renameat202.c:161: renameat2() didn't swap the content of the two files
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		FAIL - ar with -u flag failed
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86
df01_ext2		stat: invalid option -- '-'	stat from busybox is missing some options
df01_ext3		df01 1 TBROK : mkfs.ext3 /dev/loop0 failed
df01_ext4		stat: invalid option -- '-'	stat from busybox is missing some options
mkfs01		mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed
mkfs01_ext2		mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed.
mkfs01_ext3		mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed.
mkfs01_ext4		mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed.
mkfs01_minix		mkfs01 1 TFAIL : 'mkfs -t minix /dev/loop0 ' failed.
which01		which01 1 TFAIL : 'which pname' failed, not expected.

2.2 M2 RC1 build

total: 35

LTP cases	status	error msg	comment	bugzilla
chmod06		chmod06 0 TINFO : No free devices found
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
inotify03		inotify03 0 TINFO : No free devices found
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
pwritev01_64		pwritev01 3 TFAIL : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202		renameat202 1 TFAIL : renameat202.c:161: renameat2() didn't swap the content of the two files
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		FAIL - ar with -u flag failed
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86
df01_ext2		stat: invalid option -- '-'	stat from busybox is missing some options
df01_ext3		df01 1 TBROK : mkfs.ext3 /dev/loop0 failed
df01_ext4		stat: invalid option -- '-'	stat from busybox is missing some options
mkfs01		mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed
mkfs01_ext2		mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed.
mkfs01_ext3		mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed.
mkfs01_ext4		mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed.
mkfs01_minix		mkfs01 1 TFAIL : 'mkfs -t minix /dev/loop0 ' failed.
which01		which01 1 TFAIL : 'which pname' failed, not expected.

2.0 RC3 build

total: 33

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
proc01	NEW	proc01 7 TFAIL : proc01.c:461: readproc() failed with 6 errors.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

2.0 RC2 build

total: 33

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
proc01	NEW	proc01 7 TFAIL : proc01.c:461: readproc() failed with 6 errors.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.9 M3 RC1 build

total: 33

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
mprotect04	NEW	mprotect04 2 TBROK : mprotect04.c:168: received an unexpected signal: 4
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.9 M2 RC2 build

total: 33

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
mprotect04	NEW	mprotect04 2 TBROK : mprotect04.c:168: received an unexpected signal: 4
msgctl10	NEW	msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.9 M1 RC2 build

total: 32

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
msgctl10	NEW	msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.8 M4 RC2 build

total: 32

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar	LTP	FAIL - ar with -u flag failed	LTP bug. Already fixed in upstream
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.8 M3 RC3 build

total: 32

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
isofs	NEW	isofs 1 TFAIL : tst_resm
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.8 M1 RC1 build

total: 32

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
isofs	NEW	isofs 1 TFAIL : tst_resm
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.7 M4 RC5 20141018 build

total: 33

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
sendmsg02	LTP	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
min_free_kbytes		min_free_kbytes 1 TFAIL : child unexpectedly failed: 9
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.7 M4 RC4 20141011 build

total: 32

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
sendmsg02	LTP	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
min_free_kbytes		min_free_kbytes 1 TFAIL : child unexpectedly failed: 9
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.6 M5 RC4 20140411 build

total: 34

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
sendmsg02	LTP	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);
setregid02	LTP	setregid02 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success
setregid02_16	LTP	setregid02_16 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success
sigaltstack02	LTP	sigaltstack02 2 TFAIL : sigaltstack() returned 0, expected -1, errno:12	The value of MINSIGSTKSZ defined by glibc can be different as the value defined by kernel. Should use value which is low enough for all kernel versions. Already fixed in upstream.
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86
gzip01	qemux86

1.6 M5 RC2 20140402 build

total: 34

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
sendmsg02	LTP	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);
setregid02	LTP	setregid02 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success
setregid02_16	LTP	setregid02_16 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success
sigaltstack02	LTP	sigaltstack02 2 TFAIL : sigaltstack() returned 0, expected -1, errno:12	The value of MINSIGSTKSZ defined by glibc can be different as the value defined by kernel. Should use value which is low enough for all kernel versions. Already fixed in upstream.
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06	qemux86	mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	PPC doesn't support it
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86
gzip01	qemux86

1.6 M5 RC1 20140326 build

total: 34

LTP cases	status	owner	error msg	lsb	comment	bugzilla
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. MPC8315e-rdb has 128M memory.	n/a
fanotify01	NAB	n/a	fanotify01 1 TCONF : fanotify is not configured in this kernel.	n/a		n/a
fanotify02	NAB	n/a	fanotify02 1 TCONF : fanotify is not configured in this kernel.	n/a		n/a
fanotify04	NAB	n/a	fanotify04 1 TCONF : fanotify is not configured in this kernel.	n/a		n/a
readahead02	NAB	n/a	readahead02 0 TWARN : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02	LTP	n/a	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	n/a	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);	n/a
setregid02	LTP	n/a	setregid02 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success	n/a		n/a
setregid02_16	LTP	n/a	setregid02_16 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success	n/a		n/a
sigaltstack02	LTP	n/a	sigaltstack02 2 TFAIL : sigaltstack() returned 0, expected -1, errno:12	n/a	The value of MINSIGSTKSZ defined by glibc can be different as the value defined by kernel. Should use value which is low enough for all kernel versions. Already fixed in upstream.	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb has 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.6 M4 RC1 20140312 build

total: 36

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. MPC8315e-rdb has 128M memory.	n/a
fanotify01	NAB	n/a	fanotify01 1 TCONF : fanotify is not configured in this kernel.	n/a		n/a
fanotify02	NAB	n/a	fanotify02 1 TCONF : fanotify is not configured in this kernel.	n/a		n/a
fanotify04	NAB	n/a	fanotify04 1 TCONF : fanotify is not configured in this kernel.	n/a		n/a
readahead02	NAB	n/a	readahead02 0 TWARN : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02	LTP	n/a	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	n/a	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);	n/a
setregid02	LTP	n/a	setregid02 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success	n/a		n/a
setregid02_16	LTP	n/a	setregid02_16 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success	n/a		n/a
sigaltstack02	LTP	n/a	sigaltstack02 2 TFAIL : sigaltstack() returned 0, expected -1, errno:12	n/a	The value of MINSIGSTKSZ defined by glibc can be different as the value defined by kernel. Should use value which is low enough for all kernel versions. Already fixed in upstream.	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb has 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.6 M3 RC2 20140218 build

total: 36

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. MPC8315e-rdb has 128M memory.	n/a
fanotify01	NAB	n/a	fanotify01 1 TCONF : fanotify is not configured in this kernel.	n/a		n/a
fanotify02	NAB	n/a	fanotify02 1 TCONF : fanotify is not configured in this kernel.	n/a		n/a
fanotify04	NAB	n/a	fanotify04 1 TCONF : fanotify is not configured in this kernel.	n/a		n/a
readahead02	NAB	n/a	readahead02 0 TWARN : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02	LTP	n/a	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	n/a	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);	n/a
setregid02	LTP	n/a	setregid02 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success	n/a		n/a
setregid02_16	LTP	n/a	setregid02_16 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success	n/a		n/a
sigaltstack02	LTP	n/a	sigaltstack02 2 TFAIL : sigaltstack() returned 0, expected -1, errno:12	n/a	The value of MINSIGSTKSZ defined by glibc can be different as the value defined by kernel. Should use value which is low enough for all kernel versions. Already fixed in upstream.	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb has 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.6 M3 RC1 20140213 build

total: 36

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. MPC8315e-rdb has 128M memory.	n/a
fanotify01	NAB	n/a	fanotify01 1 TCONF : fanotify is not configured in this kernel.	n/a		n/a
fanotify02	NAB	n/a	fanotify02 1 TCONF : fanotify is not configured in this kernel.	n/a		n/a
fanotify04	NAB	n/a	fanotify04 1 TCONF : fanotify is not configured in this kernel.	n/a		n/a
readahead02	NAB	n/a	readahead02 0 TWARN : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02	LTP	n/a	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	n/a	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);	n/a
setregid02	LTP	n/a	setregid02 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success	n/a		n/a
setregid02_16	LTP	n/a	setregid02_16 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success	n/a		n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest05		n/a	mmstress 0 TINFO : test1: Test case tests the race condition between simultaneous read faults in the same address space.map_and_thread(): write(): Bad address	n/a		n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb has 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.6 M2 RC1 20140114 build

total: 30

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. MPC8315e-rdb have 128M memory.	n/a
readahead02	NAB	n/a	readahead02 0 TWARN : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02	LTP	n/a	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	n/a	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.6 M1 RC1 20131203 build

total: 30

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. MPC8315e-rdb have 128M memory.	n/a
readahead02	NAB	n/a	readahead02 0 TWARN : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02	LTP	n/a	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	n/a	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.5.1 RC2 20131213 build

total: 29

LTP cases	status	owner	error msg	lsb	comment	bugzilla
proc01	LTP	n/a	proc01 2 TFAIL : readproc() failed with 1 errors.	n/a	LTP bug for kernel 3.10	n/a
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mount02	NAB	n/a	mount02 4 TBROK : umount of mnt_22014 failed: errno=EBUSY(16): Device or resource busy	n/a		n/a
mount03	LTP	n/a	mount03 1 TBROK : stat for setuid_test failed	n/a	It is a LTP testcase bug. Already fixed in upstream.	n/a
readahead02	NAB	n/a	readahead02 0 TWARN : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02	LTP	n/a	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	n/a	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.5 M5 RC6 build

total: 28

LTP cases	status	owner	error msg	lsb	comment	bugzilla
proc01	LTP	n/a	proc01 2 TFAIL : readproc() failed with 1 errors.	n/a	LTP bug for kernel 3.10	n/a
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mount02	NAB	n/a	mount02 4 TBROK : umount of mnt_22014 failed: errno=EBUSY(16): Device or resource busy	n/a		n/a
mount03	LTP	n/a	mount03 1 TBROK : stat for setuid_test failed	n/a	It is a LTP testcase bug. Already fixed in upstream.	n/a
readahead02	NAB	n/a	readahead02 0 TWARN : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02	LTP	n/a	sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault	n/a	This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL. So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: union semun arg; arg.val = 1 or 0; semctl(sem_id, 0, SETVAL, arg);	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.5 M4 RC3 build

total: 25

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mount02	NAB	n/a	mount02 4 TBROK : umount of mnt_22014 failed: errno=EBUSY(16): Device or resource busy	n/a		n/a
mount03		n/a	mount03 1 TBROK : stat for setuid_test failed	n/a		n/a
readahead02	NAB	n/a	readahead02 0 TWARN : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02		n/a		n/a		n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.5 M4 RC2 build

total: 25

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mount02	NAB	n/a	mount02 4 TBROK : umount of mnt_22014 failed: errno=EBUSY(16): Device or resource busy	n/a		n/a
mount03		n/a	mount03 1 TBROK : stat for setuid_test failed	n/a		n/a
readahead02	NAB	n/a	readahead02 0 TWARN : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02		n/a		n/a		n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.5 M2 RC1 20130703 build

total: 25

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mount02	NAB	n/a	mount02 4 TBROK : umount of mnt_22014 failed: errno=EBUSY(16): Device or resource busy	n/a		n/a
mount03		n/a	mount03 1 TBROK : stat for setuid_test failed	n/a		n/a
readahead02	NAB	n/a	readahead02 0 TWARN : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
sendmsg02		n/a		n/a		n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.4.1 RC1 20130612 build

total: 19

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.5 20130604 build

total: 23

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ftruncate04	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
ftruncate04_64	NAB	n/a	mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed	n/a	Different method for mounting root	n/a
readahead02	NAB	n/a	readahead02 0 TWARN : using less cache than expected	n/a	The system doesn't have /proc/pid/io, unable to determine read bytes during test	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
thp03	NAB	n/a	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3.2 20130516 build

total: 18

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.4 M6 RC2 20130418 build

total: 19

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.4 M5 RC3 20130403 build

total: 21

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel.	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.4 M5 RC2 20130327 build

total: 19 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.4 M4 RC1 20130220 build

total: 19 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.4 M3 RC2 20130131 build

total: 23 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.4 M3 RC1 20130122 build

total: 22 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.4 M1 RC1 20121128 build

total: 18 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2.2 20121018 build

total: 21 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
process_vm_readv01	NAB	n/a	process_vm_readv 29 TFAIL : unexpected failure - expected = 14 : Bad address, actual: TEST_ERRNO=???(38): Function not implemented	n/a	Kernel doesn't support	n/a
process_vm_writev01	NAB	n/a	process_vm_writev 29 TFAIL : unexpected failure - expected = 14 : Bad address, actual: TEST_ERRNO=???(38): Function not implemented	n/a	Kernel doesn't support	n/a
ksm05	LTP	n/a	ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M5 RC4 20121010 build

total: 18 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M5 RC3 20121003 build

total: 18 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M4 RC3 20120916 build

total: 20 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
get_robust_list01	LTP	n/a	get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly	n/a	It is a LTP bug. Wait for upstream	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M3 RC2 20120814 build

total: 21 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
get_robust_list01	LTP	n/a	get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly	n/a	It is a LTP bug. Wait for upstream	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
proc01	LTP	n/a	proc01 1 TFAIL : read failed: /proc/sys/kernel/ftrace_enabled: errno=ENODEV(19): No such device	n/a	This is a LTP bug	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 20120801 build

total: 24 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
get_robust_list01	LTP	n/a	get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly	n/a	It is a LTP bug. Wait for upstream	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
proc01	LTP	n/a	proc01 1 TFAIL : read failed: /proc/sys/kernel/ftrace_enabled: errno=ENODEV(19): No such device	n/a	This is a LTP bug	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1.2 20120630 build

total: 29 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
readlink03	LTP	n/a	readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22	n/a	This is a LTP bug. Has been fixed in upstream.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2.1 20120629 build

total: 22 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
dio24	NEW	n/a	diotest05 3 TFAIL : readv/writev comparision failed	n/a	It could pass when run again	n/a
setxattr03	NAB	n/a	setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument	n/a	No xattr support in fs or fs mounted without user_xattr option	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M1 RC1 20120613 build

total: 30 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
get_robust_list01	LTP	n/a	get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly	n/a	It is a LTP bug. Wait for upstream	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	mmap1 caught unexpected signal - 11 --- exiting	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 20120606 build

total: 29 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	mmap1 caught unexpected signal - 11 --- exiting	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 RC5 Denzil

total: 21 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
setxattr03	NAB	n/a	setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument	n/a	No xattr support in fs or fs mounted without user_xattr option	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 RC4 Denzil

total: 23 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
sendfile02	NAB	n/a	sendfile02 2 TBROK : call to bind() failed: Address already in use	n/a	It is not a bug.	n/a
setxattr03	NAB	n/a	setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument	n/a	No xattr support in fs or fs mounted without user_xattr option	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
ksm05	LTP	n/a	ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M4 RC3

total: 21 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
setxattr03	NAB	n/a	setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument	n/a	No xattr support in fs or fs mounted without user_xattr option	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M4 RC2

total: 20 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
readlink03	LTP	n/a	readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22	n/a	This is a LTP bug. Has been fixed in upstream.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
sched_getaffinity01			sched_getaffinity01 4 TFAIL : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success	n/a		n/a
vma01		n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M4 RC1

total: 20 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
readlink03	LTP	n/a	readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22	n/a	This is a LTP bug. Has been fixed in upstream.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
ksm05	LTP	n/a	ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
vma01		n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M3 RC1

total: 20 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
readlink03	LTP	n/a	readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22	n/a	This is a LTP bug. Has been fixed in upstream.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
ksm05	LTP	n/a	ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
vma01		n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1.1

total: 41 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
fork13			fork13 1 TFAIL : Wait return value: expected pid=9129, got 22911, iteration 998600.	n/a		n/a
sched_getaffinity01			sched_getaffinity01 4 TFAIL : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success	n/a		n/a
clock_settime03	LTP		clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01	LTP		proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	/proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0	n/a
readlink03	LTP		readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap11	LTP		mmap11 0 TINFO : [471] mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M2 RC1

total: 31 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
nm	NEW		-------System test for nm command------ nm: nmfile1.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm -A: FAIL	n/a		n/a
ldd	NEW		/usr/lib/gcc/powerpc-poky-linux/4.6.3/../../../crt1.o:(.rodata+0x4): undefined reference to `main' collect2: ld returned 1 exit status ASSERTION 1 ldd: /tmp/ldd01-23462/a.out: No such file or directory ASSERTION #1 FAIL	n/a		n/a
vma01			vma01 0 TINFO : t = 0x40002000 vma01 0 TINFO : v = 0x40103000 u = 0x40005000 vma01 0 TINFO : s = 0x40005000, t = 0x40008000 vma01 1 TBROK : no matched s = 0x40008000 found. vma01 2 TBROK : Remaining cases broken vma01 0 TINFO : t = 0x40002000 vma01 0 TINFO : v = 0x40103000 vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		n/a
getrusage03			getrusage03 0 TINFO : allocate 100MB getrusage03 1 TBROK : malloc failed at getrusage03.c:344: errno=ENOMEM(12): Cannot allocate memory getrusage03 2 TBROK : Remaining cases broken	n/a	Not enough memory. Mpc8315e-rdb only have 128M memory.	n/a
ksm05	LTP		ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
clock_settime03	LTP		clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01	LTP		proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	/proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0	n/a
readlink03	LTP		readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M1 RC2

total: 38 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
vma01			vma01 0 TINFO : t = 0x40002000 vma01 0 TINFO : v = 0x40103000 u = 0x40005000 vma01 0 TINFO : s = 0x40005000, t = 0x40008000 vma01 1 TBROK : no matched s = 0x40008000 found. vma01 2 TBROK : Remaining cases broken vma01 0 TINFO : t = 0x40002000 vma01 0 TINFO : v = 0x40103000 vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		n/a
getrusage03			getrusage03 0 TINFO : allocate 100MB getrusage03 1 TBROK : malloc failed at getrusage03.c:344: errno=ENOMEM(12): Cannot allocate memory getrusage03 2 TBROK : Remaining cases broken	n/a	Not enough memory. Mpc8315e-rdb only have 128M memory.	n/a
ksm05	LTP		ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
sched_getaffinity01			sched_getaffinity01 4 TFAIL : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success	n/a		n/a
clock_settime03	LTP		clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01	LTP		proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	/proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0	n/a
readlink03	LTP		readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.0.2

total: 36 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
mmap11	LTP		mmap11 0 TINFO : [471] mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
quota_remount_test01			mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed	n/a
ioctl03	Qemuarm	n/a	n/a	n/a		n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M4 RC4

total: 39 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
clock_settime03			clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01			proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	/proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0	n/a
readlink03	LTP		readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap11	LTP		mmap11 0 TINFO : [471] mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M4 RC3

total: 39 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
clock_settime03			clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01			proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
readlink03	LTP		readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap11	LTP		mmap11 0 TINFO : [471] mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M4 RC2

total: 39 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
clock_settime03	NEW		clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a		n/a
readlink03	NEW		readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	NEW		sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
proc01	NEW		proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a		n/a
mmap11	LTP		mmap11 0 TINFO : [471] mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M3

total: 42 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
mmap11	NEW		mmap11 0 TINFO : [471] mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken	n/a	n/a	n/a
mmap10_2	NEW		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	n/a	n/a
mmap10_3	NEW		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	n/a	n/a
mmap10_4	NEW		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	n/a	n/a
mmap10_5	NEW		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	n/a	n/a
ksm01	NEW		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	n/a	n/a
ksm01_1	NEW		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	n/a	n/a
ksm03	NEW		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	n/a	n/a
ksm03_1	NEW		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	n/a	n/a
gf02			growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL : Test failed	n/a		[bug1138]
gf05			growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL : Test failed	n/a		[bug1138]
gf07			growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL : Test failed	n/a		[bug1138]
gf09			growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL : Test failed	n/a		[bug1138]
gf19			growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL : Test failed	n/a		[bug1138]
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
quota_remount_test01			mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed	n/a
ioctl03	Qemuarm	n/a	n/a	n/a		n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	NEW	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M2

total: 31 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
gf02			growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL : Test failed	n/a		[bug1138]
gf05			growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL : Test failed	n/a		[bug1138]
gf07			growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL : Test failed	n/a		[bug1138]
gf09			growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL : Test failed	n/a		[bug1138]
gf19			growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL : Test failed	n/a		[bug1138]
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
quota_remount_test01			mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M1

total: 32 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
gf02	NEW		growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL : Test failed	n/a		[bug1138]
gf05	NEW		growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL : Test failed	n/a		[bug1138]
gf07	NEW		growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL : Test failed	n/a		[bug1138]
gf09	NEW		growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL : Test failed	n/a		[bug1138]
gf19	NEW		growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL : Test failed	n/a		[bug1138]
ld	NEW		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a		[bug1162]
quota_remount_test01			mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed	n/a
ioctl03	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.0/M4 -RC2

total: 45

NEW Introduced: 17

Duplicated: 28

similarity: 28 (62.00%):

LTP cases	status	owner	error msg	lsb	comment	bugzilla
fchown04	n/a	n/a	fchown04 1 TBROK : chown(/opt/tmp/ltp-XXXXjXIJS0/fchy8wBtx, -1, 0) failed; errno = 1: Operation not permitted	n/a	n/a	n/a
fcntl16	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa/.nfs000000000047e62e00000025) failed; errno=16: Device or resource busy	n/a	n/a	n/a
fcntl16_64	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa/.nfs000000000047e62e00000025) failed; errno=16: Device or resource busy	n/a	n/a	n/a
fchown04_16	n/a	n/a	fchown04 1 TBROK : chown(/opt/tmp/ltp-XXXXjXIJS0/fchy8wBtx, -1, 0) failed; errno = 1: Operation not permitted	n/a	n/a	n/a
fork09	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/forZI4A7w) failed: rmdir(/opt/tmp/ltp-XXXXjXIJS0/forZI4A7w) failed; errno=39: Directory not empty	n/a	n/a	n/a
inotify02	n/a	n/a	don't get event: mask=bfc3b270	n/a	n/a	n/a
libevent01	n/a	n/a	sh: /opt/ltp/testcases/bin/libevent/run_libevent.sh: not found	n/a	n/a	n/a
open10	n/a	n/a	open10.testdir.B.22779/setgid: Incorrect modes, setgid bit not set	n/a	n/a	n/a
recvmsg01	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/reca51FYA) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/reca51FYA/.nfs000000000047ea3a00000038) failed; errno=16: Device or resource busy	n/a	n/a	n/a
sendmsg01	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/senqTfDE6) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/senqTfDE6/.nfs000000000047ea3e0000209d) failed; errno=16: Device or resource busy	n/a	n/a	n/a
utimensat01	n/a	n/a	/opt/ltp/testcases/bin/utimensat_tests.sh: exit: line 488: Illegal number: -1	n/a	n/a	n/a
openfile01	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/opeSW4SGW) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/opeSW4SGW/.nfs000000000047eab9000020a5) failed; errno=16: Device or resource busy	n/a	n/a	n/a
quota_remount_test01	n/a	n/a	mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed	n/a	n/a	n/a
dio04	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/diopbB3SB) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/diopbB3SB/.nfs000000000047eb7c000020a9) failed; errno=16: Device or resource busy	n/a	n/a	n/a
dio10	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/dioPqQ0qQ) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/dioPqQ0qQ/.nfs000000000047eb90000020ad) failed; errno=16: Device or resource busy	n/a	n/a	n/a
mmapstress01	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/mmabR9vuy) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/mmabR9vuy/.nfs000000000047eb98000020d4) failed; errno=16: Device or resource busy	n/a	n/a	n/a
mmapstress10	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/mmaBuQ5I6) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/mmaBuQ5I6/.nfs000000000047ed29000020d5) failed; errno=16: Device or resource busy	n/a	n/a	n/a
ioctl03	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02_16	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	qemux86	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
ldd	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M5 RC2 20120926 build

total: 18 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M4 RC3 20120916 build

total: 20 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
get_robust_list01	LTP	n/a	get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly	n/a	It is a LTP bug. Wait for upstream	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M3 RC2 20120814 build

total: 21 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
get_robust_list01	LTP	n/a	get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly	n/a	It is a LTP bug. Wait for upstream	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
proc01	LTP	n/a	proc01 1 TFAIL : read failed: /proc/sys/kernel/ftrace_enabled: errno=ENODEV(19): No such device	n/a	This is a LTP bug	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 20120801 build

total: 24 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
get_robust_list01	LTP	n/a	get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly	n/a	It is a LTP bug. Wait for upstream	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a	PPC doesn't support it	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
proc01	LTP	n/a	proc01 1 TFAIL : read failed: /proc/sys/kernel/ftrace_enabled: errno=ENODEV(19): No such device	n/a	This is a LTP bug	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1.2 20120630 build

total: 29 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
readlink03	LTP	n/a	readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22	n/a	This is a LTP bug. Has been fixed in upstream.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2.1 20120629 build

total: 22 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
dio24	NEW	n/a	diotest05 3 TFAIL : readv/writev comparision failed	n/a	It could pass when run again	n/a
setxattr03	NAB	n/a	setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument	n/a	No xattr support in fs or fs mounted without user_xattr option	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 M1 RC1 20120613 build

total: 30 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
get_robust_list01	LTP	n/a	get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly	n/a	It is a LTP bug. Wait for upstream	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	mmap1 caught unexpected signal - 11 --- exiting	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.3 20120606 build

total: 29 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	mmap1 caught unexpected signal - 11 --- exiting	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 RC5 Denzil

total: 21 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
setxattr03	NAB	n/a	setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument	n/a	No xattr support in fs or fs mounted without user_xattr option	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 RC4 Denzil

total: 23 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
sendfile02	NAB	n/a	sendfile02 2 TBROK : call to bind() failed: Address already in use	n/a	It is not a bug.	n/a
setxattr03	NAB	n/a	setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument	n/a	No xattr support in fs or fs mounted without user_xattr option	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
ksm05	LTP	n/a	ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M4 RC3

total: 21 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
setxattr03	NAB	n/a	setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument	n/a	No xattr support in fs or fs mounted without user_xattr option	n/a
aio02	NAB	n/a	io_fsync write: Invalid argument	n/a	io_fsync write: Invalid argument	n/a
thp02	NAB	n/a	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	n/a		n/a
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
vma01	LTP	n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M4 RC2

total: 20 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
readlink03	LTP	n/a	readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22	n/a	This is a LTP bug. Has been fixed in upstream.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
sched_getaffinity01			sched_getaffinity01 4 TFAIL : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success	n/a		n/a
vma01		n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M4 RC1

total: 20 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
readlink03	LTP	n/a	readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22	n/a	This is a LTP bug. Has been fixed in upstream.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
ksm05	LTP	n/a	ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
vma01		n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M3 RC1

total: 20 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
getrusage03	NAB	n/a	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
readlink03	LTP	n/a	readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22	n/a	This is a LTP bug. Has been fixed in upstream.	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	NAB	n/a	main(): mmap(): Cannot allocate memory	n/a	Not enough memory. Mpc8315e-rdb have 128M memory.	n/a
mmapstress06	qemux86		mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages	n/a	n/a	n/a
ksm05	LTP	n/a	ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
vma01		n/a	vma01 1 TBROK : no matched s = 0x40072000 found. vma01 2 TBROK : Remaining cases broken vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		[bug1924]
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	LTP	n/a	Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1.1

total: 41 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
fork13			fork13 1 TFAIL : Wait return value: expected pid=9129, got 22911, iteration 998600.	n/a		n/a
sched_getaffinity01			sched_getaffinity01 4 TFAIL : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success	n/a		n/a
clock_settime03	LTP		clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01	LTP		proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	/proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0	n/a
readlink03	LTP		readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap11	LTP		mmap11 0 TINFO : [471] mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M2 RC1

total: 31 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
nm	NEW		-------System test for nm command------ nm: nmfile1.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm -A: FAIL	n/a		n/a
ldd	NEW		/usr/lib/gcc/powerpc-poky-linux/4.6.3/../../../crt1.o:(.rodata+0x4): undefined reference to `main' collect2: ld returned 1 exit status ASSERTION 1 ldd: /tmp/ldd01-23462/a.out: No such file or directory ASSERTION #1 FAIL	n/a		n/a
vma01			vma01 0 TINFO : t = 0x40002000 vma01 0 TINFO : v = 0x40103000 u = 0x40005000 vma01 0 TINFO : s = 0x40005000, t = 0x40008000 vma01 1 TBROK : no matched s = 0x40008000 found. vma01 2 TBROK : Remaining cases broken vma01 0 TINFO : t = 0x40002000 vma01 0 TINFO : v = 0x40103000 vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		n/a
getrusage03			getrusage03 0 TINFO : allocate 100MB getrusage03 1 TBROK : malloc failed at getrusage03.c:344: errno=ENOMEM(12): Cannot allocate memory getrusage03 2 TBROK : Remaining cases broken	n/a	Not enough memory. Mpc8315e-rdb only have 128M memory.	n/a
ksm05	LTP		ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
clock_settime03	LTP		clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01	LTP		proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	/proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0	n/a
readlink03	LTP		readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.2 M1 RC2

total: 38 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
vma01			vma01 0 TINFO : t = 0x40002000 vma01 0 TINFO : v = 0x40103000 u = 0x40005000 vma01 0 TINFO : s = 0x40005000, t = 0x40008000 vma01 1 TBROK : no matched s = 0x40008000 found. vma01 2 TBROK : Remaining cases broken vma01 0 TINFO : t = 0x40002000 vma01 0 TINFO : v = 0x40103000 vma01 1 TBROK : unexpected VMA found. vma01 2 TBROK : Remaining cases broken	n/a		n/a
getrusage03			getrusage03 0 TINFO : allocate 100MB getrusage03 1 TBROK : malloc failed at getrusage03.c:344: errno=ENOMEM(12): Cannot allocate memory getrusage03 2 TBROK : Remaining cases broken	n/a	Not enough memory. Mpc8315e-rdb only have 128M memory.	n/a
ksm05	LTP		ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory	n/a	It is a LTP bug.	n/a
sched_getaffinity01			sched_getaffinity01 4 TFAIL : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success	n/a		n/a
clock_settime03	LTP		clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01	LTP		proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	/proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0	n/a
readlink03	LTP		readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.0.2

total: 36 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
mmap11	LTP		mmap11 0 TINFO : [471] mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
quota_remount_test01			mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed	n/a
ioctl03	Qemuarm	n/a	n/a	n/a		n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M4 RC4

total: 39 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
clock_settime03			clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01			proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	/proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0	n/a
readlink03	LTP		readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap11	LTP		mmap11 0 TINFO : [471] mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M4 RC3

total: 39 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
clock_settime03			clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
proc01			proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a	introduced with 3.0 kernel	n/a
readlink03	LTP		readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	LTP		sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
mmap11	LTP		mmap11 0 TINFO : [471] mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M4 RC2

total: 39 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
clock_settime03	NEW		clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument	n/a		n/a
readlink03	NEW		readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2	n/a	When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug.	n/a
sockioctl01	NEW		sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22)	n/a	Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug.	n/a
proc01	NEW		proc01 1 TFAIL : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument	n/a		n/a
mmap11	LTP		mmap11 0 TINFO : [471] mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_2	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_3	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_4	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
mmap10_5	LTP		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm01_1	LTP		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ksm03_1	LTP		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	This is a LTP bug.	n/a
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06		n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M3

total: 42 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
mmap11	NEW		mmap11 0 TINFO : [471] mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken	n/a	n/a	n/a
mmap10_2	NEW		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	n/a	n/a
mmap10_3	NEW		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	n/a	n/a
mmap10_4	NEW		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	n/a	n/a
mmap10_5	NEW		mmap10 0 TINFO : add to KSM regions. mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken	n/a	n/a	n/a
ksm01	NEW		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	n/a	n/a
ksm01_1	NEW		ksm01 0 TINFO : KSM merging... ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken	n/a	n/a	n/a
ksm03	NEW		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	n/a	n/a
ksm03_1	NEW		ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken	n/a	n/a	n/a
gf02			growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL : Test failed	n/a		[bug1138]
gf05			growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL : Test failed	n/a		[bug1138]
gf07			growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL : Test failed	n/a		[bug1138]
gf09			growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL : Test failed	n/a		[bug1138]
gf19			growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL : Test failed	n/a		[bug1138]
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
quota_remount_test01			mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed	n/a
ioctl03	Qemuarm	n/a	n/a	n/a		n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog06	NEW	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M2

total: 31 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
gf02			growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL : Test failed	n/a		[bug1138]
gf05			growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL : Test failed	n/a		[bug1138]
gf07			growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL : Test failed	n/a		[bug1138]
gf09			growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL : Test failed	n/a		[bug1138]
gf19			growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL : Test failed	n/a		[bug1138]
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
quota_remount_test01			mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M1

total: 32 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
gf02	NEW		growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL : Test failed	n/a		[bug1138]
gf05	NEW		growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL : Test failed	n/a		[bug1138]
gf07	NEW		growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL : Test failed	n/a		[bug1138]
gf09	NEW		growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL : Test failed	n/a		[bug1138]
gf19	NEW		growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL : Test failed	n/a		[bug1138]
ld	NEW		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a		[bug1162]
quota_remount_test01			mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed	n/a
ioctl03	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	caught unexpected signal - 11 --- exiting	n/a
mtest06_2	blacksand	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.0/M4 -RC2

total: 45

NEW Introduced: 17

Duplicated: 28

similarity: 28 (62.00%):

LTP cases	status	owner	error msg	lsb	comment	bugzilla
fchown04	n/a	n/a	fchown04 1 TBROK : chown(/opt/tmp/ltp-XXXXjXIJS0/fchy8wBtx, -1, 0) failed; errno = 1: Operation not permitted	n/a	n/a	n/a
fcntl16	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa/.nfs000000000047e62e00000025) failed; errno=16: Device or resource busy	n/a	n/a	n/a
fcntl16_64	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa/.nfs000000000047e62e00000025) failed; errno=16: Device or resource busy	n/a	n/a	n/a
fchown04_16	n/a	n/a	fchown04 1 TBROK : chown(/opt/tmp/ltp-XXXXjXIJS0/fchy8wBtx, -1, 0) failed; errno = 1: Operation not permitted	n/a	n/a	n/a
fork09	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/forZI4A7w) failed: rmdir(/opt/tmp/ltp-XXXXjXIJS0/forZI4A7w) failed; errno=39: Directory not empty	n/a	n/a	n/a
inotify02	n/a	n/a	don't get event: mask=bfc3b270	n/a	n/a	n/a
libevent01	n/a	n/a	sh: /opt/ltp/testcases/bin/libevent/run_libevent.sh: not found	n/a	n/a	n/a
open10	n/a	n/a	open10.testdir.B.22779/setgid: Incorrect modes, setgid bit not set	n/a	n/a	n/a
recvmsg01	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/reca51FYA) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/reca51FYA/.nfs000000000047ea3a00000038) failed; errno=16: Device or resource busy	n/a	n/a	n/a
sendmsg01	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/senqTfDE6) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/senqTfDE6/.nfs000000000047ea3e0000209d) failed; errno=16: Device or resource busy	n/a	n/a	n/a
utimensat01	n/a	n/a	/opt/ltp/testcases/bin/utimensat_tests.sh: exit: line 488: Illegal number: -1	n/a	n/a	n/a
openfile01	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/opeSW4SGW) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/opeSW4SGW/.nfs000000000047eab9000020a5) failed; errno=16: Device or resource busy	n/a	n/a	n/a
quota_remount_test01	n/a	n/a	mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL : Quota on Remount Failed	n/a	n/a	n/a
dio04	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/diopbB3SB) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/diopbB3SB/.nfs000000000047eb7c000020a9) failed; errno=16: Device or resource busy	n/a	n/a	n/a
dio10	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/dioPqQ0qQ) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/dioPqQ0qQ/.nfs000000000047eb90000020ad) failed; errno=16: Device or resource busy	n/a	n/a	n/a
mmapstress01	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/mmabR9vuy) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/mmabR9vuy/.nfs000000000047eb98000020d4) failed; errno=16: Device or resource busy	n/a	n/a	n/a
mmapstress10	n/a	n/a	tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/mmaBuQ5I6) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/mmaBuQ5I6/.nfs000000000047ed29000020d5) failed; errno=16: Device or resource busy	n/a	n/a	n/a
ioctl03	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02_16	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	qemux86	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
ldd	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

@@ Line 1: / Line 1: @@
+==3.0 RC2 build==
+'''total: 9'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03    1  TBROK  :  safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. MPC8315-rdb only has 128MB memory. ||
+|-
+|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| mem02 || NAB || mem02       1  TFAIL  :  mem02.c:102: calloc - alloc of 64MB failed || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| mmapstress06 || NAB || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| vma05 || LTP || TFAIL: [vdso] bug not patched || https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html ||
+|-
+|| max_map_count || || tst_test.c:817: BROK: Test haven't reported results! || PASS when run this case respectively ||
+|-
+|| float_exp_log || || TINFO  :  thread 27 (log) terminated successfully 500 loops   sh: line 1: 16611 Killed  float_exp_log -v ||  ||
+|-
+|| unshare01_sh || NAB  || unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+|-
+|}
+==2.7 RC2 build==
+'''total: 10'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03    1  TBROK  :  safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. MPC8315-rdb only has 128MB memory. ||
+|-
+|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
+|-
+|| msgstress04 || NAB || msgstress04    1  TFAIL  :  msgstress04.c:220: Child exit status = 1 || ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| mtest06 || NAB || mmap1.c:191: BROK: mmap((nil),67108864,3,34,-1,0) failed: ENOMEM || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| mem02 || NAB || mem02       1  TFAIL  :  mem02.c:102: calloc - alloc of 64MB failed || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| mmapstress06 || NAB || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| vma05 || LTP || TFAIL: [vdso] bug not patched || https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html ||
+|-
+|| max_map_count || || tst_test.c:817: BROK: Test haven't reported results! || PASS when run this case respectively ||
+|-
+|| unshare01_sh || NAB  || unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+|-
+|}
+==2.7 M3 RC1 build==
+'''total: 13'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03    1  TBROK  :  safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. MPC8315-rdb only has 128MB memory. ||
+|-
+|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
+|-
+|| msgstress04 || NAB || msgstress04    1  TFAIL  :  msgstress04.c:220: Child exit status = 1 || ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| mtest05 ||  || map_and_thread(): mmap(): Cannot allocate memory mmstress    4  TFAIL  :  mmstress.c:625: TEST 4 Failed || ||
+|-
+|| mtest06 || NAB || mmap1.c:191: BROK: mmap((nil),67108864,3,34,-1,0) failed: ENOMEM || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| mtest06_3 || ||tst_test.c:1126: BROK: Test killed! (timeout?) || ||
+|-
+|| mem02 || NAB || mem02       1  TFAIL  :  mem02.c:102: calloc - alloc of 64MB failed || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| mmapstress06 || NAB || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| vma05 || LTP || TFAIL: [vdso] bug not patched || https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html ||
+|-
+|| max_map_count || || tst_test.c:817: BROK: Test haven't reported results! || PASS when run this case respectively ||
+|-
+|| float_bessel ||  || sh: line 1: 23454 Killed float_bessel -v ||  ||
+|-
+|| unshare01_sh || NAB  || unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+|-
+|}
+==2.7 M2 RC1 build==
+'''total: 10'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03    1  TBROK  :  safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. MPC8315-rdb only has 128MB memory. ||
+|-
+|| inotify09 || NEW || tst_test.c:1072: INFO: Timeout per run is 0h 05m 00s Test timeouted, sending SIGKILL! || ||
+|-
+|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| mmapstress06 || NAB || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| vma05 || NEW ||TFAIL: [vdso] bug not patched || ||
+|-
+|| max_map_count || || tst_test.c:817: BROK: Test haven't reported results! || PASS when run this case respectively ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
+|-
+|}
+==2.7 M1 RC1 build==
+'''total: 10'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03    1  TBROK  :  safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. MPC8315-rdb only has 128MB memory. ||
+|-
+|| inotify09 || NEW || tst_test.c:1072: INFO: Timeout per run is 0h 05m 00s Test timeouted, sending SIGKILL! || ||
+|-
+|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| mmapstress06 || NAB || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| vma05 || NEW ||TFAIL: [vdso] bug not patched || ||
+|-
+|| max_map_count || || tst_test.c:817: BROK: Test haven't reported results! || PASS when run this case respectively ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
+|-
+|}
+==2.6 RC1 build==
+'''total: 11'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03    1  TBROK  :  safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. MPC8315-rdb only has 128MB memory. ||
+|-
+|| mprotect04 || NEW || mprotect04    2  TBROK  :  mprotect04.c:293: received an unexpected signal: 4 ||  ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| mmapstress06 || NAB || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| vma05 || NEW ||TFAIL: [vdso] bug not patched || ||
+|-
+|| max_map_count || || tst_test.c:817: BROK: Test haven't reported results! || PASS when run this case respectively ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
+|-
+|}
+==2.6 M3 RC1 build==
+'''total: 14'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| fcntl36 || NEW || fcntl36.c:276: FAIL: Unexpected data offset 5160 value 102 ||  ||
+|-
+|| getrusage03 || NAB || getrusage03    1  TBROK  :  safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. MPC8315-rdb only has 128MB memory. ||
+|-
+|| mprotect04 || NEW || mprotect04    2  TBROK  :  mprotect04.c:293: received an unexpected signal: 4 ||  ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| sigwaitinfo01 || LTP || sigwaitinfo01    7  TFAIL  :  sigwaitinfo01.c:386: Unrecognised child exit code || LTP fixed in commit 4926a47b538060e07bf7a7d36dec5a0c07b7ce9b ||
+|-
+|| mmapstress06 || NAB || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| vma05 || NEW ||TFAIL: [vdso] bug not patched || ||
+|-
+|| max_map_count || || tst_test.c:817: BROK: Test haven't reported results! || PASS when run this case respectively ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
+|-
+|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+||
+|-
+|}
+==2.6 M2 RC1 build==
+'''total: 11'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03    1  TBROK  :  safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. MPC8315-rdb only has 128MB memory. ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| mmapstress06 || NAB || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| vma05 || NEW ||TFAIL: [vdso] bug not patched || ||
+|-
+|| max_map_count || || tst_test.c:817: BROK: Test haven't reported results! || PASS when run this case respectively ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
+|-
+|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+||
+|-
+|}
+==2.6 M1 RC1 build==
+'''total: 11'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| fcntl36 || NEW || fcntl36.c:265: FAIL: Unexpected data offset 4372 value 41 ||  ||
+|-
+|| getrusage03 || NAB || getrusage03    1  TBROK  :  safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. MPC8315-rdb only has 128MB memory. ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| mmapstress06 || NAB || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| vma05 || NEW ||TFAIL: [vdso] bug not patched || ||
+|-
+|| max_map_count || || tst_test.c:817: BROK: Test haven't reported results! || PASS when run this case respectively ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+||
+|-
+|}
+==2.5 RC1 build==
+'''total: 13'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03    1  TBROK  :  safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. MPC8315-rdb only has 128MB memory. ||
+|-
+|| mprotect04 || NEW || mprotect04    2  TBROK  :  mprotect04.c:260: received an unexpected signal: 4 ||  ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| mmapstress06 || NAB || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| ksm03 || NAB || mksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| ksm03_1 || NAB || mksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| vma05 || NEW ||TFAIL: [vdso] bug not patched || ||
+|-
+|| max_map_count || || tst_test.c:817: BROK: Test haven't reported results! || PASS when run this case respectively ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+||
+|-
+|}
+==2.5 M3 RC1 build==
+'''total: 13'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03    1  TBROK  :  safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. MPC8315-rdb only has 128MB memory. ||
+|-
+|| keyctl06 || NAB || keyctl06.c:68: FAIL: KEYCTL_READ returned 4 but expected 8 || This case is for regression test for kernel commits e645016abc80 and 3239b6f29bdf which were introduced by kernel 4.14. It would fail on 4.12 kernel. ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| mmapstress06 || NAB || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| ksm03 || NAB || mksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| ksm03_1 || NAB || mksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| vma05 || NEW ||TFAIL: [vdso] bug not patched || ||
+|-
+|| max_map_count || || tst_test.c:817: BROK: Test haven't reported results! || PASS when run this case respectively ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+||
+|-
+|}
+==2.5 M2 RC1 build==
+'''total: 13'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03    1  TBROK  :  safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. MPC8315-rdb only has 128MB memory. ||
+|-
+|| fanotify06 || LTP || tst_test.c:1025: BROK: Test killed by SIGSEGV! || LTP bug. Upstream had fixed it. ||
+|-
+|| keyctl06 || NAB || keyctl06.c:68: FAIL: KEYCTL_READ returned 4 but expected 8 || This case is for regression test for kernel commits e645016abc80 and 3239b6f29bdf which were introduced by kernel 4.14. It would fail on 4.12 kernel. ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| mmapstress06 || NAB || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || Not enough free memory. MPC8315-rdb only has 128MB memory.||
+|-
+|| ksm03 || NAB || mksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| ksm03_1 || NAB || mksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| max_map_count || || tst_test.c:817: BROK: Test haven't reported results! || PASS when run this case respectively ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+||
+|-
+|}
+==2.5 M1 RC3 build==
+'''total: 13'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| add_key03 ||  || add_key03.c:86: FAIL: created user keyring for another user ||  ||
+|-
+|| fcntl36 || NEW || fcntl36.c:265: FAIL: Unexpected data offset 9592 value 175 ||  ||
+|-
+|| getrusage03 || NAB || getrusage03    1  TBROK  :  safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory.  ||
+|-
+|| keyctl06 ||  || keyctl06.c:50: FAIL: KEYCTL_READ overran the buffer ||  ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y ||
+|-
+|| mmapstress06 || NAB || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || ||
+|-
+|| ksm03 || NAB || mksm03.c:71: CONF: KSM configuration is not enabled || ||
+|-
+|| ksm03_1 || NAB || mksm03.c:71: CONF: KSM configuration is not enabled || ||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || ||
+|-
+|| max_map_count || || tst_test.c:817: BROK: Test haven't reported results! || ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|}
+==2.5 M1 RC1 build==
+'''total: 15'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| add_key03 || NEW || add_key03.c:86: FAIL: created user keyring for another user ||  ||
+|-
+|| getrusage03 || NAB || getrusage03    1  TBROK  :  safe_macros.c:154: getrusage03.c:334: malloc(104857600) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory.  ||
+|-
+|| keyctl06 || NEW || keyctl06.c:50: FAIL: KEYCTL_READ overran the buffer ||  ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-Su52Tp6kQv/TRHWEt/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y ||
+|-
+|| mmapstress06 || NAB || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || ||
+|-
+|| ksm03 || NAB || mksm03.c:71: CONF: KSM configuration is not enabled || ||
+|-
+|| ksm03_1 || NAB || mksm03.c:71: CONF: KSM configuration is not enabled || ||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || ||
+|-
+|| max_map_count || || tst_test.c:817: BROK: Test haven't reported results! || ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_allow01 || LTP || (2) TEST THAT PERSON NOT IN /var/spool/cron/allow IS NOT ABLE TO RUN JOB. Cron allowed user to execute test job, TEST FAILED || The test case specifies /var/spool/cron/allow and /var/spool/cron/deny as the default configure, but in Yocto, we use /etc/cron.allow and /etc/cron.deny. Modify the test script before testing. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| ar ||  || ar: `u' modifier ignored since `D' is the default (see `U') 14 TFAIL: ar haven't updated modified file0 (-u) || Already sent a patch to oe ||
+|-
+|| tar01 ||  || tar: invalid option -- 'd' 1 TFAIL: tar dvf test.tar > tar.out failed unexpectedly || Busybox tar doesn't have 'd' option. Need to install tar package ||
+|-
+|}
+==2.4 RC3 build==
+'''total: 29'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory || Not enough memory.  ||
+|-
+|| msgctl10 ||  || msgctl10    1  TFAIL  :  msgctl10.c:168:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y ||
+|-
+|| setrlimit02 ||  || setrlimit02    1  TBROK  :  tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155). || Upstream have already remove the corresponding case: https://github.com/linux-test-project/ltp/commit/259db6fed55f88ab32a0875e66803eee44d298be  ||
+|-
+|| shmat01 || LTP || shmat01.c:118: FAIL: shared memory address was not correct || LTP had a fix in master  ||
+|-
+|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet   /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
+|-
+|| mmapstress06 || [[qemux86-ltp|qemux86]] || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || ||
+|-
+|| ksm03 || NEW || mksm03.c:71: CONF: KSM configuration is not enabled || ||
+|-
+|| ksm03_1 || NEW || mksm03.c:71: CONF: KSM configuration is not enabled || ||
+|-
+|| ksm05 || NEW || ksm05.c:98: CONF: KSM configuration is not enabled || ||
+|-
+|| thp01 || NEW || tst_test.c:908: INFO: Timeout per run is 0h 05m 00s execvp: Argument list too long || LTP had a fix for this issue in master ||
+|-
+|| max_map_count || NEW || tst_test.c:785: BROK: Test haven't reported results! || ||
+|-
+|| su01 || [[qemux86-ltp|qemux86]] ||  ||  ||
+|-
+|| cron_allow01 || [[qemux86-ltp|qemux86]] ||  ||  ||
+|-
+|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] ||  ||  ||
+|-
+|| ar ||  || ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u) ||  ||
+|-
+|| nm01 ||  || cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed || image shuold install ltp-staticdev ||
+|-
+|| tar01 ||  || tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly || Busybox tar has different behavior ||
+|-
+|| df01_ext2 ||  || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]  || stat from busybox is missing some options ||
+|-
+|| df01_ext3 ||  || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]  ||  ||
+|-
+|| df01_ext4 ||  || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]  ||  ||
+|-
+|| df01_xfs ||  || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]  ||  ||
+|-
+|| df01_vfat ||  || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]  ||  ||
+|-
+|| df01_exfat ||  || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]  ||  ||
+|-
+|| df01_ntfs ||  || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]  ||  ||
+|-
+|| mkfs01 ||  ||  1 TFAIL: 'mkfs   /dev/loop0 ' failed. || no loop device, I have test it for another /dev/sd* is OK ||
+|-
+|| mkfs01_ext2 ||  ||  1 TFAIL: 'mkfs   /dev/loop0 ' failed. ||  ||
+|-
+|| mkfs01_ext3 ||  ||  1 TFAIL: 'mkfs   /dev/loop0 ' failed. ||  ||
+|-
+|| mkfs01_ext4 ||  ||  1 TFAIL: 'mkfs   /dev/loop0 ' failed. ||  ||
+|-
+|}
+==2.4 RC2 build==
+'''total: 30'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| fsync02 ||  ||  fsync02     1  TFAIL  :  fsync02.c:136: fsync took too long: 278.000000 seconds; max_block: 119463; data_blocks: 384 ||  ||
+|-
+|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory || Not enough memory.  ||
+|-
+|| msgctl10 ||  || msgctl10    1  TFAIL  :  msgctl10.c:168:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y ||
+|-
+|| setrlimit02 ||  || setrlimit02    1  TBROK  :  tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155). || Upstream have already remove the corresponding case: https://github.com/linux-test-project/ltp/commit/259db6fed55f88ab32a0875e66803eee44d298be  ||
+|-
+|| shmat01 || LTP || shmat01.c:118: FAIL: shared memory address was not correct || LTP had a fix in master  ||
+|-
+|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet   /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
+|-
+|| mmapstress06 || [[qemux86-ltp|qemux86]] || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || ||
+|-
+|| ksm03 || NEW || mksm03.c:71: CONF: KSM configuration is not enabled || ||
+|-
+|| ksm03_1 || NEW || mksm03.c:71: CONF: KSM configuration is not enabled || ||
+|-
+|| ksm05 || NEW || ksm05.c:98: CONF: KSM configuration is not enabled || ||
+|-
+|| thp01 || NEW || tst_test.c:908: INFO: Timeout per run is 0h 05m 00s execvp: Argument list too long || LTP had a fix for this issue in master ||
+|-
+|| max_map_count || NEW || tst_test.c:785: BROK: Test haven't reported results! || ||
+|-
+|| su01 || [[qemux86-ltp|qemux86]] ||  ||  ||
+|-
+|| cron_allow01 || [[qemux86-ltp|qemux86]] ||  ||  ||
+|-
+|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] ||  ||  ||
+|-
+|| ar ||  || ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u) ||  ||
+|-
+|| nm01 ||  || cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed || image shuold install ltp-staticdev ||
+|-
+|| tar01 ||  || tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly || Busybox tar has different behavior ||
+|-
+|| df01_ext2 ||  || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]  || stat from busybox is missing some options ||
+|-
+|| df01_ext3 ||  || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]  ||  ||
+|-
+|| df01_ext4 ||  || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]  ||  ||
+|-
+|| df01_xfs ||  || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]  ||  ||
+|-
+|| df01_vfat ||  || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]  ||  ||
+|-
+|| df01_exfat ||  || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]  ||  ||
+|-
+|| df01_ntfs ||  || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]  ||  ||
+|-
+|| mkfs01 ||  ||  1 TFAIL: 'mkfs   /dev/loop0 ' failed. || no loop device, I have test it for another /dev/sd* is OK ||
+|-
+|| mkfs01_ext2 ||  ||  1 TFAIL: 'mkfs   /dev/loop0 ' failed. ||  ||
+|-
+|| mkfs01_ext3 ||  ||  1 TFAIL: 'mkfs   /dev/loop0 ' failed. ||  ||
+|-
+|| mkfs01_ext4 ||  ||  1 TFAIL: 'mkfs   /dev/loop0 ' failed. ||  ||
+|-
+|}
 ==2.4 RC1 build==
 '''total: 31'''