Mpc8315e-rdb-ltp: Difference between revisions

From Yocto Project
Jump to navigationJump to search
Line 14: Line 14:
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y ||  
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y ||  
|-
|-
|| setrlimit02 ||  || setrlimit02    1  TBROK  :  tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155). ||  ||
|| setrlimit02 ||  || setrlimit02    1  TBROK  :  tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155). || on 32 bit plantform, the test case something wrong with it, the maintainer will adjust it in the future: https://github.com/linux-test-project/ltp/issues/193#issuecomment-321278220 ||
|-
|-
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet  /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet  /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||

Revision as of 02:56, 10 August 2017

2.4 M2 RC3 build

total: 30

LTP cases status error msg comment bugzilla
add_key02 NEW add_key02.c:98: FAIL: unexpected error with key type 'user': EINVAL This is a kernel bug, failed on kernel older than 4.12-rc5: https://github.com/linux-test-project/ltp/commit/25045624e941ee76a13febd36187e23c6c435507
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory Before run the ltp, we should add the tun device: modprobe tun
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y
setrlimit02 setrlimit02 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155). on 32 bit plantform, the test case something wrong with it, the maintainer will adjust it in the future: https://github.com/linux-test-project/ltp/issues/193#issuecomment-321278220
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
su01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
at_deny01 Can't open /var/run/atd.pid to signal atd. No atd running?
ar ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01 cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed image shuold install ltp-staticdev
file01 file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory) The ltp*.bb file delete the in.ksh file, I will add it later.
tar01 tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly Busybox tar has different behavior
df01_ext2 NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ext3 NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ext4 NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_xfs NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_vfat NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_exfat NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ntfs NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
mkfs01 NEW 1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext2 NEW 1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext3 NEW 1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext4 NEW 1 TFAIL: 'mkfs /dev/loop0 ' failed.

2.4 M2 RC2 build

total: 30

LTP cases status error msg comment bugzilla
add_key02 NEW add_key02.c:98: FAIL: unexpected error with key type 'user': EINVAL This is a kernel bug, failed on kernel older than 4.12-rc5: https://github.com/linux-test-project/ltp/commit/25045624e941ee76a13febd36187e23c6c435507
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory Before run the ltp, we should add the tun device: modprobe tun
mprotect04 NEW improtect04 2 TBROK  : mprotect04.c:260: received an unexpected signal: 4
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
msgctl11 msgctl11 1 TFAIL  : msgctl11.c:220: Child exit status = 1
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y
setrlimit02 setrlimit02 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
dio30 NEW diotest06 1 TFAIL  : diotest6.c:316: Read with Direct IO, Write without
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
su01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
at_deny01 Can't open /var/run/atd.pid to signal atd. No atd running?
ar ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01 cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
file01 file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory)
tar01 tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly Busybox tar has different behavior
df01_ext2 NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ext3 NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ext4 NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_xfs NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_vfat NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_exfat NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ntfs NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
mkfs01 NEW 1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext2 NEW 1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext3 NEW 1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext4 NEW 1 TFAIL: 'mkfs /dev/loop0 ' failed.

2.4 M1 RC1 build

total: 30

LTP cases status error msg comment bugzilla
faccessat01 faccessat01 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15279).
fchmodat01 fchmodat01 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15306).
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
mprotect04 NEW improtect04 2 TBROK  : mprotect04.c:260: received an unexpected signal: 4
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02 setrlimit02 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
dio30 NEW diotest06 1 TFAIL  : diotest6.c:316: Read with Direct IO, Write without
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages
su01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
at_deny01 Can't open /var/run/atd.pid to signal atd. No atd running?
ar ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01 cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
file01 file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory)
tar01 tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly Busybox tar has different behavior
df01_ext2 NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ext3 NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ext4 NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_xfs NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_vfat NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_exfat NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
df01_ntfs NEW stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...]
mkfs01 NEW 1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext2 NEW 1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext3 NEW 1 TFAIL: 'mkfs /dev/loop0 ' failed.
mkfs01_ext4 NEW 1 TFAIL: 'mkfs /dev/loop0 ' failed.

2.3 RC2 build

total: 18

LTP cases status error msg comment bugzilla
faccessat01 faccessat01 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15279).
fchmodat01 fchmodat01 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15306).
fsync02 NAB fsync02 1 TFAIL  : fsync02.c:136: fsync took too long: 264.000000 seconds; max_block: 214375; data_blocks: 384
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02 setrlimit02 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).
utimensat01 utimensat01 55 TFAIL : FAILED test 55
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
su01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
ar ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01 cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
file01 file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory)
tar01 tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly Busybox tar has different behavior

2.3 M3 RC2 build

total: 18

LTP cases status error msg comment bugzilla
faccessat01 NEW faccessat01 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15279).
fchmodat01 NEW fchmodat01 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15306).
fsync02 NAB fsync02 1 TFAIL  : fsync02.c:136: fsync took too long: 264.000000 seconds; max_block: 214375; data_blocks: 384
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02 setrlimit02 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).
utimensat01 utimensat01 55 TFAIL : FAILED test 55
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
su01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
ar ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01 NEW cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
file01 file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory)
tar01 tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly Busybox tar has different behavior

2.3 M2 RC3 build

total: 38

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
mprotect04 mprotect04 2 TBROK  : mprotect04.c:246: received an unexpected signal: 4
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
pwritev01_64 pwritev01 3 TFAIL  : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202 renameat202 1 TFAIL  : renameat202.c:161: renameat2() didn't swap the content of the two files
setrlimit02 setrlimit02 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15036).
utimensat01 utimensat01 55 TFAIL : FAILED test 55
writev01 writev01 4 TFAIL  : writev01.c:204: writev failed unexpectedly: errno=EFAULT(14): Bad address
writev03 writev03 1 TFAIL  : writev03.c:145: Got EFAULT
writev04 writev04 1 TFAIL  : writev04.c:164: Got error EFAULT
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
ar FAIL - ar with -u flag failed
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86
df01_ext2 stat: invalid option -- '-' stat from busybox is missing some options
df01_ext3 df01 1 TBROK : mkfs.ext3 /dev/loop0 failed
df01_ext4 stat: invalid option -- '-' stat from busybox is missing some options
mkfs01 mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed
mkfs01_ext2 mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed.
mkfs01_ext3 mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed.
mkfs01_ext4 mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed.
which01 which01 1 TFAIL : 'which pname' failed, not expected.

2.3 M1 RC1 build

total: 36

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
pwritev01_64 pwritev01 3 TFAIL  : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202 NEW renameat202 1 TFAIL  : renameat202.c:161: renameat2() didn't swap the content of the two files
utimensat01 utimensat01 55 TFAIL : FAILED test 55
writev01 writev01 4 TFAIL  : writev01.c:204: writev failed unexpectedly: errno=EFAULT(14): Bad address
writev03 writev03 1 TFAIL  : writev03.c:145: Got EFAULT
writev04 writev04 1 TFAIL  : writev04.c:164: Got error EFAULT
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
ar FAIL - ar with -u flag failed
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86
df01_ext2 stat: invalid option -- '-' stat from busybox is missing some options
df01_ext3 df01 1 TBROK : mkfs.ext3 /dev/loop0 failed
df01_ext4 stat: invalid option -- '-' stat from busybox is missing some options
mkfs01 mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed
mkfs01_ext2 mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed.
mkfs01_ext3 mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed.
mkfs01_ext4 mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed.
which01 which01 1 TFAIL : 'which pname' failed, not expected.

2.2 RC4 build

total: 35

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
pwritev01_64 pwritev01 3 TFAIL  : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
utimensat01 utimensat01 55 TFAIL : FAILED test 55
writev01 writev01 4 TFAIL  : writev01.c:204: writev failed unexpectedly: errno=EFAULT(14): Bad address
writev03 writev03 1 TFAIL  : writev03.c:145: Got EFAULT
writev04 writev04 1 TFAIL  : writev04.c:164: Got error EFAULT
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
ar FAIL - ar with -u flag failed
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86
df01_ext2 stat: invalid option -- '-' stat from busybox is missing some options
df01_ext3 df01 1 TBROK : mkfs.ext3 /dev/loop0 failed
df01_ext4 stat: invalid option -- '-' stat from busybox is missing some options
mkfs01 mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed
mkfs01_ext2 mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed.
mkfs01_ext3 mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed.
mkfs01_ext4 mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed.
which01 which01 1 TFAIL : 'which pname' failed, not expected.

2.2 M3 RC1 build

total: 33

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
pwritev01_64 pwritev01 3 TFAIL  : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202 renameat202 1 TFAIL  : renameat202.c:161: renameat2() didn't swap the content of the two files
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
ar FAIL - ar with -u flag failed
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86
df01_ext2 stat: invalid option -- '-' stat from busybox is missing some options
df01_ext3 df01 1 TBROK : mkfs.ext3 /dev/loop0 failed
df01_ext4 stat: invalid option -- '-' stat from busybox is missing some options
mkfs01 mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed
mkfs01_ext2 mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed.
mkfs01_ext3 mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed.
mkfs01_ext4 mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed.
mkfs01_minix mkfs01 1 TFAIL : 'mkfs -t minix /dev/loop0 ' failed.
which01 which01 1 TFAIL : 'which pname' failed, not expected.

2.2 M2 RC1 build

total: 35

LTP cases status error msg comment bugzilla
chmod06 chmod06 0 TINFO  : No free devices found
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
inotify03 inotify03 0 TINFO  : No free devices found
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
pwritev01_64 pwritev01 3 TFAIL  : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202 renameat202 1 TFAIL  : renameat202.c:161: renameat2() didn't swap the content of the two files
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
ar FAIL - ar with -u flag failed
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86
df01_ext2 stat: invalid option -- '-' stat from busybox is missing some options
df01_ext3 df01 1 TBROK : mkfs.ext3 /dev/loop0 failed
df01_ext4 stat: invalid option -- '-' stat from busybox is missing some options
mkfs01 mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed
mkfs01_ext2 mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed.
mkfs01_ext3 mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed.
mkfs01_ext4 mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed.
mkfs01_minix mkfs01 1 TFAIL : 'mkfs -t minix /dev/loop0 ' failed.
which01 which01 1 TFAIL : 'which pname' failed, not expected.

2.0 RC3 build

total: 33

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
proc01 NEW proc01 7 TFAIL  : proc01.c:461: readproc() failed with 6 errors.
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

2.0 RC2 build

total: 33

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
proc01 NEW proc01 7 TFAIL  : proc01.c:461: readproc() failed with 6 errors.
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

1.9 M3 RC1 build

total: 33

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
mprotect04 NEW mprotect04 2 TBROK  : mprotect04.c:168: received an unexpected signal: 4
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

1.9 M2 RC2 build

total: 33

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
mprotect04 NEW mprotect04 2 TBROK  : mprotect04.c:168: received an unexpected signal: 4
msgctl10 NEW msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86


1.9 M1 RC2 build

total: 32

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
msgctl10 NEW msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

1.8 M4 RC2 build

total: 32

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
ar LTP FAIL - ar with -u flag failed LTP bug. Already fixed in upstream
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

1.8 M3 RC3 build

total: 32

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
isofs NEW isofs 1 TFAIL : tst_resm
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

1.8 M1 RC1 build

total: 32

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
isofs NEW isofs 1 TFAIL : tst_resm
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

1.7 M4 RC5 20141018 build

total: 33

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
sendmsg02 LTP sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL.

So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: 

     union semun arg;
     arg.val = 1 or 0;
     semctl(sem_id, 0, SETVAL, arg);
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
min_free_kbytes min_free_kbytes 1 TFAIL  : child unexpectedly failed: 9
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

1.7 M4 RC4 20141011 build

total: 32

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
sendmsg02 LTP sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL.

So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: 

     union semun arg;
     arg.val = 1 or 0;
     semctl(sem_id, 0, SETVAL, arg);
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
min_free_kbytes min_free_kbytes 1 TFAIL  : child unexpectedly failed: 9
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

1.6 M5 RC4 20140411 build

total: 34

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
sendmsg02 LTP sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL.

So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: 

     union semun arg;
     arg.val = 1 or 0;
     semctl(sem_id, 0, SETVAL, arg);
setregid02 LTP setregid02 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success
setregid02_16 LTP setregid02_16 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success
sigaltstack02 LTP sigaltstack02 2 TFAIL  : sigaltstack() returned 0, expected -1, errno:12 The value of MINSIGSTKSZ defined by glibc can be different as the value defined by kernel. Should use value which is low enough for all kernel versions. Already fixed in upstream.
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86
gzip01 qemux86

1.6 M5 RC2 20140402 build

total: 34

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory Not enough memory. MPC8315e-rdb has 128M memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
sendmsg02 LTP sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL.

So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: 

     union semun arg;
     arg.val = 1 or 0;
     semctl(sem_id, 0, SETVAL, arg);
setregid02 LTP setregid02 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success
setregid02_16 LTP setregid02_16 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success
sigaltstack02 LTP sigaltstack02 2 TFAIL  : sigaltstack() returned 0, expected -1, errno:12 The value of MINSIGSTKSZ defined by glibc can be different as the value defined by kernel. Should use value which is low enough for all kernel versions. Already fixed in upstream.
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory. Mpc8315e-rdb has 128M memory.
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo PPC doesn't support it
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86
gzip01 qemux86

1.6 M5 RC1 20140326 build

total: 34

LTP cases status owner error msg lsb comment bugzilla
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. MPC8315e-rdb has 128M memory. n/a
fanotify01 NAB n/a fanotify01 1 TCONF  : fanotify is not configured in this kernel. n/a n/a
fanotify02 NAB n/a fanotify02 1 TCONF  : fanotify is not configured in this kernel. n/a n/a
fanotify04 NAB n/a fanotify04 1 TCONF  : fanotify is not configured in this kernel. n/a n/a
readahead02 NAB n/a readahead02 0 TWARN  : using less cache than expected n/a The system doesn't have /proc/pid/io, unable to determine read bytes during test n/a
sendmsg02 LTP n/a sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault n/a This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL.

So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: 

     union semun arg;
     arg.val = 1 or 0;
     semctl(sem_id, 0, SETVAL, arg);
n/a
setregid02 LTP n/a setregid02 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success n/a n/a
setregid02_16 LTP n/a setregid02_16 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success n/a n/a
sigaltstack02 LTP n/a sigaltstack02 2 TFAIL  : sigaltstack() returned 0, expected -1, errno:12 n/a The value of MINSIGSTKSZ defined by glibc can be different as the value defined by kernel. Should use value which is low enough for all kernel versions. Already fixed in upstream. n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb has 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
thp03 NAB n/a thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.6 M4 RC1 20140312 build

total: 36

LTP cases status owner error msg lsb comment bugzilla
ftruncate04 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
ftruncate04_64 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. MPC8315e-rdb has 128M memory. n/a
fanotify01 NAB n/a fanotify01 1 TCONF  : fanotify is not configured in this kernel. n/a n/a
fanotify02 NAB n/a fanotify02 1 TCONF  : fanotify is not configured in this kernel. n/a n/a
fanotify04 NAB n/a fanotify04 1 TCONF  : fanotify is not configured in this kernel. n/a n/a
readahead02 NAB n/a readahead02 0 TWARN  : using less cache than expected n/a The system doesn't have /proc/pid/io, unable to determine read bytes during test n/a
sendmsg02 LTP n/a sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault n/a This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL.

So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: 

     union semun arg;
     arg.val = 1 or 0;
     semctl(sem_id, 0, SETVAL, arg);
n/a
setregid02 LTP n/a setregid02 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success n/a n/a
setregid02_16 LTP n/a setregid02_16 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success n/a n/a
sigaltstack02 LTP n/a sigaltstack02 2 TFAIL  : sigaltstack() returned 0, expected -1, errno:12 n/a The value of MINSIGSTKSZ defined by glibc can be different as the value defined by kernel. Should use value which is low enough for all kernel versions. Already fixed in upstream. n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb has 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
thp03 NAB n/a thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.6 M3 RC2 20140218 build

total: 36

LTP cases status owner error msg lsb comment bugzilla
ftruncate04 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
ftruncate04_64 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. MPC8315e-rdb has 128M memory. n/a
fanotify01 NAB n/a fanotify01 1 TCONF  : fanotify is not configured in this kernel. n/a n/a
fanotify02 NAB n/a fanotify02 1 TCONF  : fanotify is not configured in this kernel. n/a n/a
fanotify04 NAB n/a fanotify04 1 TCONF  : fanotify is not configured in this kernel. n/a n/a
readahead02 NAB n/a readahead02 0 TWARN  : using less cache than expected n/a The system doesn't have /proc/pid/io, unable to determine read bytes during test n/a
sendmsg02 LTP n/a sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault n/a This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL.

So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: 

     union semun arg;
     arg.val = 1 or 0;
     semctl(sem_id, 0, SETVAL, arg);
n/a
setregid02 LTP n/a setregid02 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success n/a n/a
setregid02_16 LTP n/a setregid02_16 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success n/a n/a
sigaltstack02 LTP n/a sigaltstack02 2 TFAIL  : sigaltstack() returned 0, expected -1, errno:12 n/a The value of MINSIGSTKSZ defined by glibc can be different as the value defined by kernel. Should use value which is low enough for all kernel versions. Already fixed in upstream. n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb has 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
thp03 NAB n/a thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.6 M3 RC1 20140213 build

total: 36

LTP cases status owner error msg lsb comment bugzilla
ftruncate04 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
ftruncate04_64 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. MPC8315e-rdb has 128M memory. n/a
fanotify01 NAB n/a fanotify01 1 TCONF  : fanotify is not configured in this kernel. n/a n/a
fanotify02 NAB n/a fanotify02 1 TCONF  : fanotify is not configured in this kernel. n/a n/a
fanotify04 NAB n/a fanotify04 1 TCONF  : fanotify is not configured in this kernel. n/a n/a
readahead02 NAB n/a readahead02 0 TWARN  : using less cache than expected n/a The system doesn't have /proc/pid/io, unable to determine read bytes during test n/a
sendmsg02 LTP n/a sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault n/a This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL.

So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: 

     union semun arg;
     arg.val = 1 or 0;
     semctl(sem_id, 0, SETVAL, arg);
n/a
setregid02 LTP n/a setregid02 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success n/a n/a
setregid02_16 LTP n/a setregid02_16 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest05 n/a mmstress 0 TINFO  : test1: Test case tests the race condition between simultaneous read faults in the same address space.map_and_thread(): write(): Bad address n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb has 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
thp03 NAB n/a thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.6 M2 RC1 20140114 build

total: 30

LTP cases status owner error msg lsb comment bugzilla
ftruncate04 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
ftruncate04_64 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. MPC8315e-rdb have 128M memory. n/a
readahead02 NAB n/a readahead02 0 TWARN  : using less cache than expected n/a The system doesn't have /proc/pid/io, unable to determine read bytes during test n/a
sendmsg02 LTP n/a sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault n/a This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL.

So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: 

     union semun arg;
     arg.val = 1 or 0;
     semctl(sem_id, 0, SETVAL, arg);
n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
thp03 NAB n/a thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.6 M1 RC1 20131203 build

total: 30

LTP cases status owner error msg lsb comment bugzilla
ftruncate04 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
ftruncate04_64 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. MPC8315e-rdb have 128M memory. n/a
readahead02 NAB n/a readahead02 0 TWARN  : using less cache than expected n/a The system doesn't have /proc/pid/io, unable to determine read bytes during test n/a
sendmsg02 LTP n/a sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault n/a This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL.

So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: 

     union semun arg;
     arg.val = 1 or 0;
     semctl(sem_id, 0, SETVAL, arg);
n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
thp03 NAB n/a thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.5.1 RC2 20131213 build

total: 29

LTP cases status owner error msg lsb comment bugzilla
proc01 LTP n/a proc01 2 TFAIL  : readproc() failed with 1 errors. n/a LTP bug for kernel 3.10 n/a
ftruncate04 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
ftruncate04_64 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mount02 NAB n/a mount02 4 TBROK  : umount of mnt_22014 failed: errno=EBUSY(16): Device or resource busy n/a n/a
mount03 LTP n/a mount03 1 TBROK  : stat for setuid_test failed n/a It is a LTP testcase bug. Already fixed in upstream. n/a
readahead02 NAB n/a readahead02 0 TWARN  : using less cache than expected n/a The system doesn't have /proc/pid/io, unable to determine read bytes during test n/a
sendmsg02 LTP n/a sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault n/a This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL.

So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: 

     union semun arg;
     arg.val = 1 or 0;
     semctl(sem_id, 0, SETVAL, arg);
n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel. n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
thp03 NAB n/a thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.5 M5 RC6 build

total: 28

LTP cases status owner error msg lsb comment bugzilla
proc01 LTP n/a proc01 2 TFAIL  : readproc() failed with 1 errors. n/a LTP bug for kernel 3.10 n/a
ftruncate04 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
ftruncate04_64 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mount02 NAB n/a mount02 4 TBROK  : umount of mnt_22014 failed: errno=EBUSY(16): Device or resource busy n/a n/a
mount03 LTP n/a mount03 1 TBROK  : stat for setuid_test failed n/a It is a LTP testcase bug. Already fixed in upstream. n/a
readahead02 NAB n/a readahead02 0 TWARN  : using less cache than expected n/a The system doesn't have /proc/pid/io, unable to determine read bytes during test n/a
sendmsg02 LTP n/a sendmsg02[569]: unhandled signal 11 at 00000001 nip 480f9290 lr 100011fc code 30001 Segmentation fault n/a This is a LTP testcase bug. According to the semctl manual, the fourth argument of semctl should has the uion semun type if the cmd is SETVAL.

So we should replace all the "semctl(sem_id, 0, SETVAL, 1)" or "semctl(sem_id, 0, SETVAL, 0)" in sendmsg02.c to something like this: 

     union semun arg;
     arg.val = 1 or 0;
     semctl(sem_id, 0, SETVAL, arg);
n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel. n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
thp03 NAB n/a thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.5 M4 RC3 build

total: 25

LTP cases status owner error msg lsb comment bugzilla
ftruncate04 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
ftruncate04_64 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mount02 NAB n/a mount02 4 TBROK  : umount of mnt_22014 failed: errno=EBUSY(16): Device or resource busy n/a n/a
mount03 n/a mount03 1 TBROK  : stat for setuid_test failed n/a n/a
readahead02 NAB n/a readahead02 0 TWARN  : using less cache than expected n/a The system doesn't have /proc/pid/io, unable to determine read bytes during test n/a
sendmsg02 n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel. n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
thp03 NAB n/a thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.5 M4 RC2 build

total: 25

LTP cases status owner error msg lsb comment bugzilla
ftruncate04 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
ftruncate04_64 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mount02 NAB n/a mount02 4 TBROK  : umount of mnt_22014 failed: errno=EBUSY(16): Device or resource busy n/a n/a
mount03 n/a mount03 1 TBROK  : stat for setuid_test failed n/a n/a
readahead02 NAB n/a readahead02 0 TWARN  : using less cache than expected n/a The system doesn't have /proc/pid/io, unable to determine read bytes during test n/a
sendmsg02 n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel. n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
thp03 NAB n/a thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.5 M2 RC1 20130703 build

total: 25

LTP cases status owner error msg lsb comment bugzilla
ftruncate04 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
ftruncate04_64 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mount02 NAB n/a mount02 4 TBROK  : umount of mnt_22014 failed: errno=EBUSY(16): Device or resource busy n/a n/a
mount03 n/a mount03 1 TBROK  : stat for setuid_test failed n/a n/a
readahead02 NAB n/a readahead02 0 TWARN  : using less cache than expected n/a The system doesn't have /proc/pid/io, unable to determine read bytes during test n/a
sendmsg02 n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel. n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
thp03 NAB n/a thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.4.1 RC1 20130612 build

total: 19

LTP cases status owner error msg lsb comment bugzilla
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel. n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.5 20130604 build

total: 23

LTP cases status owner error msg lsb comment bugzilla
ftruncate04 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
ftruncate04_64 NAB n/a mount: can't find /dev/root in /etc/fstab ftruncate04.sh : ERROR : mounting /dev/root remount,mand failed n/a Different method for mounting root n/a
readahead02 NAB n/a readahead02 0 TWARN  : using less cache than expected n/a The system doesn't have /proc/pid/io, unable to determine read bytes during test n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel. n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
thp03 NAB n/a thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.3.2 20130516 build

total: 18

LTP cases status owner error msg lsb comment bugzilla
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel. n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.4 M6 RC2 20130418 build

total: 19

LTP cases status owner error msg lsb comment bugzilla
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel. n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.4 M5 RC3 20130403 build

total: 21

LTP cases status owner error msg lsb comment bugzilla
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync() calls the syscall io_submit(). When doing IO_CMD_FSYNC and IO_CMD_FDSYNC, Linux kernel will involve the filesystem's aio_fsync and aio_fdsync operations, and if the filesystem doesn't implement these two operations, it will return -EINVAL. In general, this CMD is not implemented in Linux kernel. n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.4 M5 RC2 20130327 build

total: 19 (100%)

LTP cases status owner error msg lsb comment bugzilla
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.4 M4 RC1 20130220 build

total: 19 (100%)

LTP cases status owner error msg lsb comment bugzilla
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.4 M3 RC2 20130131 build

total: 23 (100%)

LTP cases status owner error msg lsb comment bugzilla
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.4 M3 RC1 20130122 build

total: 22 (100%)

LTP cases status owner error msg lsb comment bugzilla
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.4 M1 RC1 20121128 build

total: 18 (100%)

LTP cases status owner error msg lsb comment bugzilla
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.2.2 20121018 build

total: 21 (100%)

LTP cases status owner error msg lsb comment bugzilla
process_vm_readv01 NAB n/a process_vm_readv 29 TFAIL  : unexpected failure - expected = 14 : Bad address, actual: TEST_ERRNO=???(38): Function not implemented n/a Kernel doesn't support n/a
process_vm_writev01 NAB n/a process_vm_writev 29 TFAIL  : unexpected failure - expected = 14 : Bad address, actual: TEST_ERRNO=???(38): Function not implemented n/a Kernel doesn't support n/a
ksm05 LTP n/a ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory n/a It is a LTP bug. n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.3 M5 RC4 20121010 build

total: 18 (100%)

LTP cases status owner error msg lsb comment bugzilla
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.3 M5 RC3 20121003 build

total: 18 (100%)

LTP cases status owner error msg lsb comment bugzilla
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.3 M4 RC3 20120916 build

total: 20 (100%)

LTP cases status owner error msg lsb comment bugzilla
get_robust_list01 LTP n/a get_robust_list01 4 TFAIL  : get_robust_list succeeded unexpectedly n/a It is a LTP bug. Wait for upstream n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.3 M3 RC2 20120814 build

total: 21 (100%)

LTP cases status owner error msg lsb comment bugzilla
get_robust_list01 LTP n/a get_robust_list01 4 TFAIL  : get_robust_list succeeded unexpectedly n/a It is a LTP bug. Wait for upstream n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
proc01 LTP n/a proc01 1 TFAIL  : read failed: /proc/sys/kernel/ftrace_enabled: errno=ENODEV(19): No such device n/a This is a LTP bug n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.3 20120801 build

total: 24 (100%)

LTP cases status owner error msg lsb comment bugzilla
get_robust_list01 LTP n/a get_robust_list01 4 TFAIL  : get_robust_list succeeded unexpectedly n/a It is a LTP bug. Wait for upstream n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
proc01 LTP n/a proc01 1 TFAIL  : read failed: /proc/sys/kernel/ftrace_enabled: errno=ENODEV(19): No such device n/a This is a LTP bug n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.1.2 20120630 build

total: 29 (100%)

LTP cases status owner error msg lsb comment bugzilla
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
readlink03 LTP n/a readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22 n/a This is a LTP bug. Has been fixed in upstream. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.2.1 20120629 build

total: 22 (100%)

LTP cases status owner error msg lsb comment bugzilla
dio24 NEW n/a diotest05 3 TFAIL  : readv/writev comparision failed n/a It could pass when run again n/a
setxattr03 NAB n/a setxattr03 0 TWARN  : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument

setxattr03 0 TWARN  : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument

n/a No xattr support in fs or fs mounted without user_xattr option n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.3 M1 RC1 20120613 build

total: 30 (100%)

LTP cases status owner error msg lsb comment bugzilla
get_robust_list01 LTP n/a get_robust_list01 4 TFAIL  : get_robust_list succeeded unexpectedly n/a It is a LTP bug. Wait for upstream n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a mmap1 caught unexpected signal - 11 --- exiting n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.3 20120606 build

total: 29 (100%)

LTP cases status owner error msg lsb comment bugzilla
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a mmap1 caught unexpected signal - 11 --- exiting n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.2 RC5 Denzil

total: 21 (100%)

LTP cases status owner error msg lsb comment bugzilla
setxattr03 NAB n/a setxattr03 0 TWARN  : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument

setxattr03 0 TWARN  : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument

n/a No xattr support in fs or fs mounted without user_xattr option n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.2 RC4 Denzil

total: 23 (100%)

LTP cases status owner error msg lsb comment bugzilla
sendfile02 NAB n/a sendfile02 2 TBROK  : call to bind() failed: Address already in use n/a It is not a bug. n/a
setxattr03 NAB n/a setxattr03 0 TWARN  : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument

setxattr03 0 TWARN  : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument

n/a No xattr support in fs or fs mounted without user_xattr option n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a n/a
ksm05 LTP n/a ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory n/a It is a LTP bug. n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.2 M4 RC3

total: 21 (100%)

LTP cases status owner error msg lsb comment bugzilla
setxattr03 NAB n/a setxattr03 0 TWARN  : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument

setxattr03 0 TWARN  : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument

n/a No xattr support in fs or fs mounted without user_xattr option n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.2 M4 RC2

total: 20 (100%)

LTP cases status owner error msg lsb comment bugzilla
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
readlink03 LTP n/a readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22 n/a This is a LTP bug. Has been fixed in upstream. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
sched_getaffinity01 sched_getaffinity01 4 TFAIL  : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success n/a n/a
vma01 n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.2 M4 RC1

total: 20 (100%)

LTP cases status owner error msg lsb comment bugzilla
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
readlink03 LTP n/a readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22 n/a This is a LTP bug. Has been fixed in upstream. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
ksm05 LTP n/a ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory n/a It is a LTP bug. n/a
vma01 n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.2 M3 RC1

total: 20 (100%)

LTP cases status owner error msg lsb comment bugzilla
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
readlink03 LTP n/a readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22 n/a This is a LTP bug. Has been fixed in upstream. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
ksm05 LTP n/a ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory n/a It is a LTP bug. n/a
vma01 n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.1.1

total: 41 (100%)

LTP cases status owner error msg lsb comment bugzilla
fork13 fork13 1 TFAIL  : Wait return value: expected pid=9129, got 22911, iteration 998600. n/a n/a
sched_getaffinity01 sched_getaffinity01 4 TFAIL  : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success n/a n/a
clock_settime03 LTP clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

n/a introduced with 3.0 kernel n/a
proc01 LTP proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument

proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument

n/a /proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0 n/a
readlink03 LTP readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 n/a When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. n/a
sockioctl01 LTP sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) n/a Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. n/a
mmap11 LTP mmap11 0 TINFO  : [471]

mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_2 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_3 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_4 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_5 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01_1 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03_1 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ld LTP Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.2 M2 RC1

total: 31 (100%)

LTP cases status owner error msg lsb comment bugzilla
nm NEW -------System test for nm command------

nm: nmfile1.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm -A: FAIL

n/a n/a
ldd NEW /usr/lib/gcc/powerpc-poky-linux/4.6.3/../../../crt1.o:(.rodata+0x4): undefined reference to `main'

collect2: ld returned 1 exit status 

 ASSERTION 1

ldd: /tmp/ldd01-23462/a.out: No such file or directory ASSERTION #1 FAIL

n/a n/a
vma01 vma01 0 TINFO  : t = 0x40002000

vma01 0 TINFO  : v = 0x40103000 u = 0x40005000 vma01 0 TINFO  : s = 0x40005000, t = 0x40008000 vma01 1 TBROK  : no matched s = 0x40008000 found. vma01 2 TBROK  : Remaining cases broken vma01 0 TINFO  : t = 0x40002000 vma01 0 TINFO  : v = 0x40103000 vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a n/a
getrusage03 getrusage03 0 TINFO  : allocate 100MB

getrusage03 1 TBROK  : malloc failed at getrusage03.c:344: errno=ENOMEM(12): Cannot allocate memory getrusage03 2 TBROK  : Remaining cases broken

n/a Not enough memory. Mpc8315e-rdb only have 128M memory. n/a
ksm05 LTP ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory n/a It is a LTP bug. n/a
clock_settime03 LTP clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

n/a introduced with 3.0 kernel n/a
proc01 LTP proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument

proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument

n/a /proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0 n/a
readlink03 LTP readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 n/a When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. n/a
sockioctl01 LTP sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) n/a Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. n/a
mmap10_2 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_3 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_4 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_5 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ld LTP Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.2 M1 RC2

total: 38 (100%)

LTP cases status owner error msg lsb comment bugzilla
vma01 vma01 0 TINFO  : t = 0x40002000

vma01 0 TINFO  : v = 0x40103000 u = 0x40005000 vma01 0 TINFO  : s = 0x40005000, t = 0x40008000 vma01 1 TBROK  : no matched s = 0x40008000 found. vma01 2 TBROK  : Remaining cases broken vma01 0 TINFO  : t = 0x40002000 vma01 0 TINFO  : v = 0x40103000 vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a n/a
getrusage03 getrusage03 0 TINFO  : allocate 100MB

getrusage03 1 TBROK  : malloc failed at getrusage03.c:344: errno=ENOMEM(12): Cannot allocate memory getrusage03 2 TBROK  : Remaining cases broken

n/a Not enough memory. Mpc8315e-rdb only have 128M memory. n/a
ksm05 LTP ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory n/a It is a LTP bug. n/a
sched_getaffinity01 sched_getaffinity01 4 TFAIL  : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success n/a n/a
clock_settime03 LTP clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

n/a introduced with 3.0 kernel n/a
proc01 LTP proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument

proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument

n/a /proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0 n/a
readlink03 LTP readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 n/a When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. n/a
sockioctl01 LTP sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) n/a Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. n/a
mmap10_2 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_3 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_4 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_5 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ld LTP Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.0.2

total: 36 (100%)

LTP cases status owner error msg lsb comment bugzilla
mmap11 LTP mmap11 0 TINFO  : [471]

mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_2 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_3 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_4 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_5 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01_1 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03_1 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
quota_remount_test01 mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed n/a
ioctl03 Qemuarm n/a n/a n/a n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.1/M4 RC4

total: 39 (100%)

LTP cases status owner error msg lsb comment bugzilla
clock_settime03 clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

n/a introduced with 3.0 kernel n/a
proc01 proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument

proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument

n/a /proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0 n/a
readlink03 LTP readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 n/a When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. n/a
sockioctl01 LTP sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) n/a Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. n/a
mmap11 LTP mmap11 0 TINFO  : [471]

mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_2 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_3 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_4 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_5 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01_1 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03_1 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ld LTP Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.1/M4 RC3

total: 39 (100%)

LTP cases status owner error msg lsb comment bugzilla
clock_settime03 clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

n/a introduced with 3.0 kernel n/a
proc01 proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument

proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument

n/a introduced with 3.0 kernel n/a
readlink03 LTP readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 n/a When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. n/a
sockioctl01 LTP sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) n/a Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. n/a
mmap11 LTP mmap11 0 TINFO  : [471]

mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_2 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_3 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_4 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_5 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01_1 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03_1 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ld LTP Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.1/M4 RC2

total: 39 (100%)

LTP cases status owner error msg lsb comment bugzilla
clock_settime03 NEW clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

n/a n/a
readlink03 NEW readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 n/a When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. n/a
sockioctl01 NEW sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) n/a Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. n/a
proc01 NEW proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument

proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument

n/a n/a
mmap11 LTP mmap11 0 TINFO  : [471]

mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_2 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_3 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_4 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_5 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01_1 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03_1 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ld LTP Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.1/M3

total: 42 (100%)

LTP cases status owner error msg lsb comment bugzilla
mmap11 NEW mmap11 0 TINFO  : [471]

mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken

n/a n/a n/a
mmap10_2 NEW mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a n/a n/a
mmap10_3 NEW mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a n/a n/a
mmap10_4 NEW mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a n/a n/a
mmap10_5 NEW mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a n/a n/a
ksm01 NEW ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a n/a n/a
ksm01_1 NEW ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a n/a n/a
ksm03 NEW ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a n/a n/a
ksm03_1 NEW ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a n/a n/a
gf02 growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL  : Test failed

n/a [bug1138]
gf05 growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL  : Test failed

n/a [bug1138]
gf07 growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL  : Test failed

n/a [bug1138]
gf09 growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL  : Test failed

n/a [bug1138]
gf19 growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL  : Test failed

n/a [bug1138]
ld LTP Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
quota_remount_test01 mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed n/a
ioctl03 Qemuarm n/a n/a n/a n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 NEW n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.1/M2

total: 31 (100%)

LTP cases status owner error msg lsb comment bugzilla
gf02 growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL  : Test failed

n/a [bug1138]
gf05 growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL  : Test failed

n/a [bug1138]
gf07 growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL  : Test failed

n/a [bug1138]
gf09 growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL  : Test failed

n/a [bug1138]
gf19 growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL  : Test failed

n/a [bug1138]
ld LTP Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
quota_remount_test01 mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.1/M1

total: 32 (100%)

LTP cases status owner error msg lsb comment bugzilla
gf02 NEW growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL  : Test failed

n/a [bug1138]
gf05 NEW growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL  : Test failed

n/a [bug1138]
gf07 NEW growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL  : Test failed

n/a [bug1138]
gf09 NEW growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL  : Test failed

n/a [bug1138]
gf19 NEW growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL  : Test failed

n/a [bug1138]
ld NEW Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a [bug1162]
quota_remount_test01 mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed n/a
ioctl03 qemux86 n/a n/a n/a n/a n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.0/M4 -RC2

total: 45

  • NEW Introduced: 17
  • Duplicated: 28

similarity: 28 (62.00%):

LTP cases status owner error msg lsb comment bugzilla
fchown04 n/a n/a fchown04 1 TBROK  : chown(/opt/tmp/ltp-XXXXjXIJS0/fchy8wBtx, -1, 0) failed; errno = 1: Operation not permitted n/a n/a n/a
fcntl16 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa/.nfs000000000047e62e00000025) failed; errno=16: Device or resource busy n/a n/a n/a
fcntl16_64 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa/.nfs000000000047e62e00000025) failed; errno=16: Device or resource busy n/a n/a n/a
fchown04_16 n/a n/a fchown04 1 TBROK  : chown(/opt/tmp/ltp-XXXXjXIJS0/fchy8wBtx, -1, 0) failed; errno = 1: Operation not permitted n/a n/a n/a
fork09 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/forZI4A7w) failed: rmdir(/opt/tmp/ltp-XXXXjXIJS0/forZI4A7w) failed; errno=39: Directory not empty n/a n/a n/a
inotify02 n/a n/a don't get event: mask=bfc3b270 n/a n/a n/a
libevent01 n/a n/a sh: /opt/ltp/testcases/bin/libevent/run_libevent.sh: not found n/a n/a n/a
open10 n/a n/a open10.testdir.B.22779/setgid: Incorrect modes, setgid bit not set n/a n/a n/a
recvmsg01 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/reca51FYA) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/reca51FYA/.nfs000000000047ea3a00000038) failed; errno=16: Device or resource busy n/a n/a n/a
sendmsg01 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/senqTfDE6) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/senqTfDE6/.nfs000000000047ea3e0000209d) failed; errno=16: Device or resource busy n/a n/a n/a
utimensat01 n/a n/a /opt/ltp/testcases/bin/utimensat_tests.sh: exit: line 488: Illegal number: -1 n/a n/a n/a
openfile01 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/opeSW4SGW) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/opeSW4SGW/.nfs000000000047eab9000020a5) failed; errno=16: Device or resource busy n/a n/a n/a
quota_remount_test01 n/a n/a mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed n/a n/a n/a
dio04 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/diopbB3SB) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/diopbB3SB/.nfs000000000047eb7c000020a9) failed; errno=16: Device or resource busy n/a n/a n/a
dio10 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/dioPqQ0qQ) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/dioPqQ0qQ/.nfs000000000047eb90000020ad) failed; errno=16: Device or resource busy n/a n/a n/a
mmapstress01 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/mmabR9vuy) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/mmabR9vuy/.nfs000000000047eb98000020d4) failed; errno=16: Device or resource busy n/a n/a n/a
mmapstress10 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/mmaBuQ5I6) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/mmaBuQ5I6/.nfs000000000047ed29000020d5) failed; errno=16: Device or resource busy n/a n/a n/a
ioctl03 qemux86 n/a n/a n/a n/a n/a
lchown02 qemux86 n/a n/a n/a n/a n/a
lchown02_16 qemux86 n/a n/a n/a n/a n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a n/a n/a n/a n/a
mtest06_2 qemux86 n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
ldd qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a


1.3 M5 RC2 20120926 build

total: 18 (100%)

LTP cases status owner error msg lsb comment bugzilla
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.3 M4 RC3 20120916 build

total: 20 (100%)

LTP cases status owner error msg lsb comment bugzilla
get_robust_list01 LTP n/a get_robust_list01 4 TFAIL  : get_robust_list succeeded unexpectedly n/a It is a LTP bug. Wait for upstream n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.3 M3 RC2 20120814 build

total: 21 (100%)

LTP cases status owner error msg lsb comment bugzilla
get_robust_list01 LTP n/a get_robust_list01 4 TFAIL  : get_robust_list succeeded unexpectedly n/a It is a LTP bug. Wait for upstream n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
proc01 LTP n/a proc01 1 TFAIL  : read failed: /proc/sys/kernel/ftrace_enabled: errno=ENODEV(19): No such device n/a This is a LTP bug n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.3 20120801 build

total: 24 (100%)

LTP cases status owner error msg lsb comment bugzilla
get_robust_list01 LTP n/a get_robust_list01 4 TFAIL  : get_robust_list succeeded unexpectedly n/a It is a LTP bug. Wait for upstream n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a PPC doesn't support it n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
proc01 LTP n/a proc01 1 TFAIL  : read failed: /proc/sys/kernel/ftrace_enabled: errno=ENODEV(19): No such device n/a This is a LTP bug n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.1.2 20120630 build

total: 29 (100%)

LTP cases status owner error msg lsb comment bugzilla
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
readlink03 LTP n/a readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22 n/a This is a LTP bug. Has been fixed in upstream. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.2.1 20120629 build

total: 22 (100%)

LTP cases status owner error msg lsb comment bugzilla
dio24 NEW n/a diotest05 3 TFAIL  : readv/writev comparision failed n/a It could pass when run again n/a
setxattr03 NAB n/a setxattr03 0 TWARN  : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument

setxattr03 0 TWARN  : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument

n/a No xattr support in fs or fs mounted without user_xattr option n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.3 M1 RC1 20120613 build

total: 30 (100%)

LTP cases status owner error msg lsb comment bugzilla
get_robust_list01 LTP n/a get_robust_list01 4 TFAIL  : get_robust_list succeeded unexpectedly n/a It is a LTP bug. Wait for upstream n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a mmap1 caught unexpected signal - 11 --- exiting n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.3 20120606 build

total: 29 (100%)

LTP cases status owner error msg lsb comment bugzilla
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a mmap1 caught unexpected signal - 11 --- exiting n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.2 RC5 Denzil

total: 21 (100%)

LTP cases status owner error msg lsb comment bugzilla
setxattr03 NAB n/a setxattr03 0 TWARN  : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument

setxattr03 0 TWARN  : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument

n/a No xattr support in fs or fs mounted without user_xattr option n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.2 RC4 Denzil

total: 23 (100%)

LTP cases status owner error msg lsb comment bugzilla
sendfile02 NAB n/a sendfile02 2 TBROK  : call to bind() failed: Address already in use n/a It is not a bug. n/a
setxattr03 NAB n/a setxattr03 0 TWARN  : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument

setxattr03 0 TWARN  : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument

n/a No xattr support in fs or fs mounted without user_xattr option n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a n/a
ksm05 LTP n/a ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory n/a It is a LTP bug. n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.2 M4 RC3

total: 21 (100%)

LTP cases status owner error msg lsb comment bugzilla
setxattr03 NAB n/a setxattr03 0 TWARN  : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument

setxattr03 0 TWARN  : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument

n/a No xattr support in fs or fs mounted without user_xattr option n/a
aio02 NAB n/a io_fsync write: Invalid argument n/a io_fsync write: Invalid argument n/a
thp02 NAB n/a thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo n/a n/a
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
vma01 LTP n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.2 M4 RC2

total: 20 (100%)

LTP cases status owner error msg lsb comment bugzilla
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
readlink03 LTP n/a readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22 n/a This is a LTP bug. Has been fixed in upstream. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
sched_getaffinity01 sched_getaffinity01 4 TFAIL  : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success n/a n/a
vma01 n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.2 M4 RC1

total: 20 (100%)

LTP cases status owner error msg lsb comment bugzilla
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
readlink03 LTP n/a readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22 n/a This is a LTP bug. Has been fixed in upstream. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
ksm05 LTP n/a ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory n/a It is a LTP bug. n/a
vma01 n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.2 M3 RC1

total: 20 (100%)

LTP cases status owner error msg lsb comment bugzilla
getrusage03 NAB n/a getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:154: errno=ENOMEM(12): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
readlink03 LTP n/a readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=2, expected errno=22 n/a This is a LTP bug. Has been fixed in upstream. n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06_2 NAB n/a main(): mmap(): Cannot allocate memory n/a Not enough memory. Mpc8315e-rdb have 128M memory. n/a
mmapstress06 qemux86 mmapstress06: errno = 12; large mmap failed

for this test to run, it needs a mmap space of 32769 pages

n/a n/a n/a
ksm05 LTP n/a ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory n/a It is a LTP bug. n/a
vma01 n/a vma01 1 TBROK  : no matched s = 0x40072000 found.

vma01 2 TBROK  : Remaining cases broken vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a [bug1924]
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld LTP n/a Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a

1.1.1

total: 41 (100%)

LTP cases status owner error msg lsb comment bugzilla
fork13 fork13 1 TFAIL  : Wait return value: expected pid=9129, got 22911, iteration 998600. n/a n/a
sched_getaffinity01 sched_getaffinity01 4 TFAIL  : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success n/a n/a
clock_settime03 LTP clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

n/a introduced with 3.0 kernel n/a
proc01 LTP proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument

proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument

n/a /proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0 n/a
readlink03 LTP readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 n/a When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. n/a
sockioctl01 LTP sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) n/a Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. n/a
mmap11 LTP mmap11 0 TINFO  : [471]

mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_2 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_3 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_4 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_5 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01_1 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03_1 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ld LTP Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.2 M2 RC1

total: 31 (100%)

LTP cases status owner error msg lsb comment bugzilla
nm NEW -------System test for nm command------

nm: nmfile1.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile1.obj: no symbols nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm -A: FAIL

n/a n/a
ldd NEW /usr/lib/gcc/powerpc-poky-linux/4.6.3/../../../crt1.o:(.rodata+0x4): undefined reference to `main'

collect2: ld returned 1 exit status 

 ASSERTION 1

ldd: /tmp/ldd01-23462/a.out: No such file or directory ASSERTION #1 FAIL

n/a n/a
vma01 vma01 0 TINFO  : t = 0x40002000

vma01 0 TINFO  : v = 0x40103000 u = 0x40005000 vma01 0 TINFO  : s = 0x40005000, t = 0x40008000 vma01 1 TBROK  : no matched s = 0x40008000 found. vma01 2 TBROK  : Remaining cases broken vma01 0 TINFO  : t = 0x40002000 vma01 0 TINFO  : v = 0x40103000 vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a n/a
getrusage03 getrusage03 0 TINFO  : allocate 100MB

getrusage03 1 TBROK  : malloc failed at getrusage03.c:344: errno=ENOMEM(12): Cannot allocate memory getrusage03 2 TBROK  : Remaining cases broken

n/a Not enough memory. Mpc8315e-rdb only have 128M memory. n/a
ksm05 LTP ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory n/a It is a LTP bug. n/a
clock_settime03 LTP clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

n/a introduced with 3.0 kernel n/a
proc01 LTP proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument

proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument

n/a /proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0 n/a
readlink03 LTP readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 n/a When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. n/a
sockioctl01 LTP sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) n/a Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. n/a
mmap10_2 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_3 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_4 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_5 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ld LTP Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.2 M1 RC2

total: 38 (100%)

LTP cases status owner error msg lsb comment bugzilla
vma01 vma01 0 TINFO  : t = 0x40002000

vma01 0 TINFO  : v = 0x40103000 u = 0x40005000 vma01 0 TINFO  : s = 0x40005000, t = 0x40008000 vma01 1 TBROK  : no matched s = 0x40008000 found. vma01 2 TBROK  : Remaining cases broken vma01 0 TINFO  : t = 0x40002000 vma01 0 TINFO  : v = 0x40103000 vma01 1 TBROK  : unexpected VMA found. vma01 2 TBROK  : Remaining cases broken

n/a n/a
getrusage03 getrusage03 0 TINFO  : allocate 100MB

getrusage03 1 TBROK  : malloc failed at getrusage03.c:344: errno=ENOMEM(12): Cannot allocate memory getrusage03 2 TBROK  : Remaining cases broken

n/a Not enough memory. Mpc8315e-rdb only have 128M memory. n/a
ksm05 LTP ksm05 1 TBROK  : open: errno=ENOENT(2): No such file or directory n/a It is a LTP bug. n/a
sched_getaffinity01 sched_getaffinity01 4 TFAIL  : sched_getaffinity(getpid() + 1, len, mask): TEST_ERRNO=???(0): Success n/a n/a
clock_settime03 LTP clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

n/a introduced with 3.0 kernel n/a
proc01 LTP proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument

proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument

n/a /proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0 n/a
readlink03 LTP readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 n/a When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. n/a
sockioctl01 LTP sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) n/a Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. n/a
mmap10_2 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_3 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_4 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_5 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ld LTP Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.0.2

total: 36 (100%)

LTP cases status owner error msg lsb comment bugzilla
mmap11 LTP mmap11 0 TINFO  : [471]

mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_2 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_3 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_4 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_5 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01_1 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03_1 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
quota_remount_test01 mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed n/a
ioctl03 Qemuarm n/a n/a n/a n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.1/M4 RC4

total: 39 (100%)

LTP cases status owner error msg lsb comment bugzilla
clock_settime03 clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

n/a introduced with 3.0 kernel n/a
proc01 proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument

proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument

n/a /proc/self/.../ns/{net,uts,ipc} files introduced in kernel 3.0 n/a
readlink03 LTP readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 n/a When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. n/a
sockioctl01 LTP sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) n/a Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. n/a
mmap11 LTP mmap11 0 TINFO  : [471]

mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_2 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_3 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_4 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_5 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01_1 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03_1 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ld LTP Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.1/M4 RC3

total: 39 (100%)

LTP cases status owner error msg lsb comment bugzilla
clock_settime03 clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

n/a introduced with 3.0 kernel n/a
proc01 proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument

proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument

n/a introduced with 3.0 kernel n/a
readlink03 LTP readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 n/a When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. n/a
sockioctl01 LTP sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) n/a Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. n/a
mmap11 LTP mmap11 0 TINFO  : [471]

mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_2 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_3 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_4 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_5 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01_1 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03_1 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ld LTP Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.1/M4 RC2

total: 39 (100%)

LTP cases status owner error msg lsb comment bugzilla
clock_settime03 NEW clock_settime03 8 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

clock_settime03 9 TFAIL  : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument

n/a n/a
readlink03 NEW readlink03 9 TFAIL  : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 n/a When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. n/a
sockioctl01 NEW sockioctl01 4 TFAIL  : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) n/a Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. n/a
proc01 NEW proc01 1 TFAIL  : read failed: /proc/self/task/12187/ns/net: errno=EINVAL(22): Invalid argument

proc01 2 TFAIL  : read failed: /proc/self/task/12187/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL  : read failed: /proc/self/task/12187/ns/ipc: errno=EINVAL(22): Invalid argument

n/a n/a
mmap11 LTP mmap11 0 TINFO  : [471]

mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_2 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_3 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_4 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
mmap10_5 LTP mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm01_1 LTP ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ksm03_1 LTP ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a This is a LTP bug. n/a
ld LTP Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.1/M3

total: 42 (100%)

LTP cases status owner error msg lsb comment bugzilla
mmap11 NEW mmap11 0 TINFO  : [471]

mmap11 1 TBROK  : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK  : Remaining cases broken

n/a n/a n/a
mmap10_2 NEW mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use /dev/zero. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a n/a n/a
mmap10_3 NEW mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a n/a n/a
mmap10_4 NEW mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a n/a n/a
mmap10_5 NEW mmap10 0 TINFO  : add to KSM regions.

mmap10 0 TINFO  : use anonymous pages. mmap10 0 TINFO  : start tests. mmap10 1 TBROK  : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK  : Remaining cases broken

n/a n/a n/a
ksm01 NEW ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a n/a n/a
ksm01_1 NEW ksm01 0 TINFO  : KSM merging...

ksm01 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK  : Remaining cases broken

n/a n/a n/a
ksm03 NEW ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a n/a n/a
ksm03_1 NEW ksm03 0 TINFO  : KSM merging...

ksm03 1 TBROK  : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK  : Remaining cases broken

n/a n/a n/a
gf02 growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL  : Test failed

n/a [bug1138]
gf05 growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL  : Test failed

n/a [bug1138]
gf07 growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL  : Test failed

n/a [bug1138]
gf09 growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL  : Test failed

n/a [bug1138]
gf19 growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL  : Test failed

n/a [bug1138]
ld LTP Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
quota_remount_test01 mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed n/a
ioctl03 Qemuarm n/a n/a n/a n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog06 NEW n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.1/M2

total: 31 (100%)

LTP cases status owner error msg lsb comment bugzilla
gf02 growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL  : Test failed

n/a [bug1138]
gf05 growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL  : Test failed

n/a [bug1138]
gf07 growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL  : Test failed

n/a [bug1138]
gf09 growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL  : Test failed

n/a [bug1138]
gf19 growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL  : Test failed

n/a [bug1138]
ld LTP Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a This is a LTP bug [bug1162]
quota_remount_test01 mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.1/M1

total: 32 (100%)

LTP cases status owner error msg lsb comment bugzilla
gf02 NEW growfiles(gf02): 31425 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf02): 31425 growfiles.c/1679: 1 Hit max errors value of 1 gf02 1 TFAIL  : Test failed

n/a [bug1138]
gf05 NEW growfiles(gf05): 31429 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf05): 31429 growfiles.c/1679: 1 Hit max errors value of 1 gf05 1 TFAIL  : Test failed

n/a [bug1138]
gf07 NEW growfiles(gf07): 31432 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf07): 31432 growfiles.c/1679: 1 Hit max errors value of 1 gf07 1 TFAIL  : Test failed

n/a [bug1138]
gf09 NEW growfiles(gf09): 31435 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf09): 31435 growfiles.c/1679: 1 Hit max errors value of 1 gf09 1 TFAIL  : Test failed

n/a [bug1138]
gf19 NEW growfiles(gf19): 31452 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002

growfiles(gf19): 31452 growfiles.c/1679: 1 Hit max errors value of 1 gf19 1 TFAIL  : Test failed

n/a [bug1138]
ld NEW Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a [bug1162]
quota_remount_test01 mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed n/a
ioctl03 qemux86 n/a n/a n/a n/a n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a caught unexpected signal - 11 --- exiting n/a
mtest06_2 blacksand n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.0/M4 -RC2

total: 45

  • NEW Introduced: 17
  • Duplicated: 28

similarity: 28 (62.00%):

LTP cases status owner error msg lsb comment bugzilla
fchown04 n/a n/a fchown04 1 TBROK  : chown(/opt/tmp/ltp-XXXXjXIJS0/fchy8wBtx, -1, 0) failed; errno = 1: Operation not permitted n/a n/a n/a
fcntl16 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa/.nfs000000000047e62e00000025) failed; errno=16: Device or resource busy n/a n/a n/a
fcntl16_64 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/fcnm6NMQa/.nfs000000000047e62e00000025) failed; errno=16: Device or resource busy n/a n/a n/a
fchown04_16 n/a n/a fchown04 1 TBROK  : chown(/opt/tmp/ltp-XXXXjXIJS0/fchy8wBtx, -1, 0) failed; errno = 1: Operation not permitted n/a n/a n/a
fork09 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/forZI4A7w) failed: rmdir(/opt/tmp/ltp-XXXXjXIJS0/forZI4A7w) failed; errno=39: Directory not empty n/a n/a n/a
inotify02 n/a n/a don't get event: mask=bfc3b270 n/a n/a n/a
libevent01 n/a n/a sh: /opt/ltp/testcases/bin/libevent/run_libevent.sh: not found n/a n/a n/a
open10 n/a n/a open10.testdir.B.22779/setgid: Incorrect modes, setgid bit not set n/a n/a n/a
recvmsg01 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/reca51FYA) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/reca51FYA/.nfs000000000047ea3a00000038) failed; errno=16: Device or resource busy n/a n/a n/a
sendmsg01 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/senqTfDE6) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/senqTfDE6/.nfs000000000047ea3e0000209d) failed; errno=16: Device or resource busy n/a n/a n/a
utimensat01 n/a n/a /opt/ltp/testcases/bin/utimensat_tests.sh: exit: line 488: Illegal number: -1 n/a n/a n/a
openfile01 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/opeSW4SGW) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/opeSW4SGW/.nfs000000000047eab9000020a5) failed; errno=16: Device or resource busy n/a n/a n/a
quota_remount_test01 n/a n/a mount: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) Could not mount the filesystem quota_remount_test01 1 TFAIL  : Quota on Remount Failed n/a n/a n/a
dio04 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/diopbB3SB) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/diopbB3SB/.nfs000000000047eb7c000020a9) failed; errno=16: Device or resource busy n/a n/a n/a
dio10 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/dioPqQ0qQ) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/dioPqQ0qQ/.nfs000000000047eb90000020ad) failed; errno=16: Device or resource busy n/a n/a n/a
mmapstress01 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/mmabR9vuy) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/mmabR9vuy/.nfs000000000047eb98000020d4) failed; errno=16: Device or resource busy n/a n/a n/a
mmapstress10 n/a n/a tst_rmdir(): rmobj(/opt/tmp/ltp-XXXXjXIJS0/mmaBuQ5I6) failed: unlink(/opt/tmp/ltp-XXXXjXIJS0/mmaBuQ5I6/.nfs000000000047ed29000020d5) failed; errno=16: Device or resource busy n/a n/a n/a
ioctl03 qemux86 n/a n/a n/a n/a n/a
lchown02 qemux86 n/a n/a n/a n/a n/a
lchown02_16 qemux86 n/a n/a n/a n/a n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06 qemux86 n/a n/a n/a n/a n/a
mtest06_2 qemux86 n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
ldd qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a
Retrieved from "https://wiki.yoctoproject.org/wiki/index.php?title=Mpc8315e-rdb-ltp&oldid=29996"