Qemuarm-ltp

From Yocto Project
Revision as of 07:02, 13 June 2011 by Yzhao (talk | contribs) (→‎1.1/M1)
Jump to navigationJump to search

1.1/M1

total: 29 (100%)

LTP cases status owner error msg lsb comment bugzilla
ld NEW Assertion 1 ..................

-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg

n/a [bug1162]
fallocate01 fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large n/a This case is expected to return -EOPNOSUPP and then LTP will skip it. However on qemuarm/qemumips -EFBIG is returned earlier, and thus trigger this failure.

Actually I don't understand why this will happen, and any offset/length returns same failure. fallocate from util-linux could trigger this failure too.

[bug678]
fallocate02 fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large n/a same as fallocate01 [bug678]
fallocate03 fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large n/a same as fallocate01 [bug678]
getcontext01 NAB getcontext - Sanity test : Fail errno=38 : Function not implemented n/a libc doesn't implement getcontext for ARM, so this result is expected n/a
ioctl03 qemux86 n/a n/a n/a n/a n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06_2 qemux86 n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a /opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.0/M4 -RC2

total: 31

  • NEW Introduced: 1(mem02)
  • LTP: 0
  • NAB: 1
  • Fixed: 0
  • Duplicated: 26
  • pending: 3
  • not started: 0
  • Disappear without fixing patch: 1(msgctl11)

similarity: 26 (90.00%):

       mem02 fallocate01 fallocate02 fallocate03 getcontext01
LTP cases status owner error msg lsb comment bugzilla
mem02 n/a n/a mem02 0 TINFO  : pm1=0x400c0008 pm2=0x400e8008 mem02 1 TFAIL  : free did not dealloc memory mem02 0 TINFO  : pm1=0x400c0008 pm2=0x400e8008 mem02 1 TFAIL  : free did not dealloc memory

1.0/M4 -RC1

total: 31

  • NEW Introduced: 1(msgctl11)
  • LTP: 0
  • NAB: 1
  • Fixed: 0
  • Duplicated: 26
  • pending: 3
  • not started: 0
  • Disappear without fixing patch: 1(tar)

similarity: 26 (90.00%):

       msgctl11 fallocate01 fallocate02 fallocate03 getcontext01
LTP cases status owner error msg lsb comment bugzilla
msgctl11 n/a n/a msgctl11 0 TWARN  : Fork failure in first child of child group 56 msgctl11 0 TWARN  : Fork failure in first child of child group 48 msgctl11 0 TWARN  : Fork failure in first child of child group 43 n/a n/a n/a
fallocate01 pending Kevin Tian fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large n/a This case is expected to return -EOPNOSUPP and then LTP will skip it. However on qemuarm/qemumips -EFBIG is returned earlier, and thus trigger this failure.

Actually I don't understand why this will happen, and any offset/length returns same failure. fallocate from util-linux could trigger this failure too.

[bug678]
fallocate02 pending Kevin Tian fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large n/a same as fallocate01 [bug678]
fallocate03 pending Kevin Tian fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large n/a same as fallocate01 [bug678]
getcontext01 NAB Kevin Tian getcontext - Sanity test : Fail errno=38 : Function not implemented n/a libc doesn't implement getcontext for ARM, so this result is expected n/a
ioctl03 qemux86 n/a n/a n/a n/a n/a
lchown02 qemux86 n/a n/a n/a n/a n/a
lchown02_16 qemux86 n/a n/a n/a n/a n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06_2 qemux86 n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a

1.0/M2

total: 37 (100% audited)

  • LTP: 0
  • NAB: 4
  • Fixed: 1
  • Duplicated: 29
  • pending: 3
  • not started: 0

similarity: 29 (78.00%):

       chdir01A fallocate01 fallocate02 fallocate03 getcontext01 splice02 utimensat01 hackbench01 
LTP cases status owner error msg lsb comment bugzilla
utimensat01 Fixed Kevin Tian EXPECTED: EPERM

RESULT: SUCCESS 1 1

FAILED test 78

... (Failed tests: 46 47 48 49 50 51 52 53 54 55 56 57 58 61 62 63 64 65 66 67 68 69 70 73 74 75 76 77 78)

n/a utimensat01 tried to verify all kinds of success and error conditions as defined in utimensat manual, for example, to get EPERM when the file is marked as append-only or immutable by chattr. However chattr has problem to change desired attributes as below:

chattr: Inappropriate ioctl for device while reading flags on /tmp/ltp-XXXX36nW4a/utimensat_tests/utimensat.test_file

it has been fixed in 2.6.37, and thus should be able to be further confirmed in 1.0-M3

n/a
fallocate01 pending Kevin Tian fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large n/a This case is expected to return -EOPNOSUPP and then LTP will skip it. However on qemuarm/qemumips -EFBIG is returned earlier, and thus trigger this failure.

Actually I don't understand why this will happen, and any offset/length returns same failure. fallocate from util-linux could trigger this failure too.

[bug678]
fallocate02 pending Kevin Tian fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large n/a same as fallocate01 [bug678]
fallocate03 pending Kevin Tian fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large n/a same as fallocate01 [bug678]
chdir01A NAB Kevin Tian symlink(object, symbolic) was succesful.

mkdir(object, 0700) was successful

chdir(2) returned successfully, but getcwd(3) indicated new current working directory location /var/volatile/tmp/ltp-XXXXK9vOzf/chdNQdk3G/object not equal to expected /tmp/ltp-XXXXK9vOzf/chdNQdk3G/object

n/a this is caused by not using "-d tmpdir" to specify a new tmp directory.

Then it means that /tmp is used which is however a symbol link to /var/volatile/tmp.

getcwd() syscall retrieves the full path from the leaf to the /, which has not idea of the original symbol link, and thus break LTP's expectation

n/a
getcontext01 NAB Kevin Tian getcontext - Sanity test : Fail errno=38 : Function not implemented n/a libc doesn't implement getcontext for ARM, so this result is expected n/a
hackbench01 NAB Kevin Tian the system simply hangs n/a it's not approriate to run this stress test in such an emulator, and this case has been commented when doing test on other platforms n/a
splice02 NAB Kevin Tian splice failed - errno = 28 : No space left on device n/a this is because no "-d tmpdir" specified when running this test, while standard /dev/hda only have limited space n/a
ioctl03 qemux86 n/a n/a n/a n/a n/a
lchown02 qemux86 n/a n/a n/a n/a n/a
lchown02_16 qemux86 n/a n/a n/a n/a n/a
sysctl03 qemux86 n/a n/a n/a n/a n/a
syslog01 qemux86 n/a n/a n/a n/a n/a
syslog02 qemux86 n/a n/a n/a n/a n/a
syslog03 qemux86 n/a n/a n/a n/a n/a
syslog04 qemux86 n/a n/a n/a n/a n/a
syslog05 qemux86 n/a n/a n/a n/a n/a
syslog07 qemux86 n/a n/a n/a n/a n/a
syslog08 qemux86 n/a n/a n/a n/a n/a
syslog09 qemux86 n/a n/a n/a n/a n/a
syslog10 qemux86 n/a n/a n/a n/a n/a
mtest06_2 qemux86 n/a n/a n/a n/a n/a
mmapstress06 qemux86 n/a n/a n/a n/a n/a
su01 qemux86 n/a n/a n/a n/a n/a
cron02 qemux86 n/a n/a n/a n/a n/a
cron_deny01 qemux86 n/a n/a n/a n/a n/a
cron_allow01 qemux86 n/a n/a n/a n/a n/a
cron_dirs_checks01 qemux86 n/a n/a n/a n/a n/a
ld qemux86 n/a n/a n/a n/a n/a
ldd qemux86 n/a n/a n/a n/a n/a
file qemux86 n/a n/a n/a n/a n/a
tar qemux86 n/a n/a n/a n/a n/a
cron qemux86 n/a n/a n/a n/a n/a
logrotate qemux86 n/a n/a n/a n/a n/a
cpio qemux86 n/a n/a n/a n/a n/a
unzip01 qemux86 n/a n/a n/a n/a n/a
gzip01 qemux86 n/a n/a n/a n/a n/a