Qemuarm-ltp

1.0/M1

total: 37

similarity: 29 (78.00%):

       chdir01A fallocate01 fallocate02 fallocate03 getcontext01 splice02 utimensat01 hackbench01 

audit: 33 (89%)

• LTP: 0

• NAB: 2

• Fixed: 0

• Matched: 29

pending: 3

not started: 3

LTP cases	status	owner	error msg	lsb	comment	bugzilla
chdir01A	NAB	Kevin Tian	symlink(object, symbolic) was succesful. mkdir(object, 0700) was successful chdir(2) returned successfully, but getcwd(3) indicated new current working directory location /var/volatile/tmp/ltp-XXXXK9vOzf/chdNQdk3G/object not equal to expected /tmp/ltp-XXXXK9vOzf/chdNQdk3G/object	n/a	this is caused by not using "-d tmpdir" to specify a new tmp directory. Then it means that /tmp is used which is however a symbol link to /var/volatile/tmp. getcwd() syscall retrieves the full path from the leaf to the /, which has not idea of the original symbol link, and thus break LTP's expectation	n/a
getcontext01	NAB	Kevin Tian	getcontext - Sanity test : Fail errno=38 : Function not implemented	n/a	libc doesn't implement getcontext for ARM, so this result is expected	n/a
utimensat01	pending	Kevin Tian	EXPECTED: EPERM RESULT: SUCCESS 1 1 FAILED test 78	n/a	utimensat01 tried to verify all kinds of success and error conditions as defined in utimensat manual, for example, to get EPERM when the file is marked as append-only or immutable by chattr. However chattr has problem to change desired attributes as below: chattr: Inappropriate ioctl for device while reading flags on /tmp/ltp-XXXX36nW4a/utimensat_tests/utimensat.test_file	n/a
hackbench01	not started	n/a	n/a	n/a	n/a	n/a
splice02	NAB	Kevin Tian	splice failed - errno = 28 : No space left on device	n/a	this is because no "-d tmpdir" specified when running this test, while standard /dev/hda only have limited space	n/a
fallocate01	pending	Kevin Tian	fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	This case is expected to return -EOPNOSUPP and then LTP will skip it. However on qemuarm/qemumips -EFBIG is returned earlier, and thus trigger this failure. Actually I don't understand why this will happen, and any offset/length returns same failure. fallocate from util-linux could trigger this failure too.	[bug678]
fallocate02	pending	Kevin Tian	fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	same as fallocate01	[bug678]
fallocate03	pending	Kevin Tian	fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	same as fallocate01	[bug678]
ioctl03	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02_16	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	qemux86	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	qemux86	n/a	n/a	n/a	n/a	n/a
ldd	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
tar	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a