Posix result

Introduction

The Open POSIX* Test Suite is an open source test suite with the goal of performing conformance, functional, stress, and performance testing of the functions described in the IEEE Std 1003.1-2001 System Interfaces specification. Eventual testing of the full specification is desired (http://posixtest.sourceforge.net/)

Similar to [LTP result], embedded linux distribution is highly customized for a specific purpose, and thus both the kernel and base environment may not satisfy the posix requirement. So the major purposes of this work are:

• to understand the reasons for existing posix failures. If the cause is from a specific package itself, go to fix it. Or else if the error simply come from the fact that a given package doesn't exist in current profile, add the explanation here
• to track poix test results cross Yocto releases, and ensure a declining error number for same profile
• to be the reference if Yocto users want to get a base picture

There is one bugzilla entry related: http://bugzilla.pokylinux.org/show_bug.cgi?id=172

Overall trend

Overall trend tends to track the change of posix test results along with Yocto's progress.

In below table we list total POSIX failures for each architectures in each milestone: (now this wiki doesn't allow upload files. So for detail logs please refer to earlier bug link)

Milestone	qemux86	qemu-x86_64	qemuppc	qemuarm	qemumips	atom-pc	sugarbay	blacksand	beagleboard	routerstation	mpc8315e-rdb
1.1 M2	n/a	n/a	30	34	32	n/a	31	26	32	69	33
1.1 M1(**)	n/a	n/a	35	49	43	n/a	50	48	46	84	49
1.0-M2 (*)	1744	1744	1745	1750	1753	1753	n/a	1744	1755	1754	n/a

*: 1.0-M2 misses some link flags, and thus many unexpected link failures observed
**: 1.1 M1 has gcc upgrade from 4.5.1 to 4.6.1, which has two new options, -Wunused-but-set-variable and -Waddress enabled by default. They casused many cases failed. We need add -Wno-unused-but-set-variable and -Wno-address to fix the problems.

general tips:

• use "-m 512" to launch the qemu targets
• make sure below line is uncommented in LDFLAGS file:

#-D_XOPEN_SOURCE=600 -lpthread -lrt -lm

• don't test AIO as the test cases themselves have compilation warnings which are treated as errors (use 'exit' while doesn't include stdlib.h)

Current Milestone (1.1/M2)

environment OpenPOSIX version: posixtestsuite-1.5.2.tar

Profile: poky-image-sdk

run command: ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

result

Status	sugarbay	blacksand	qemuppc	qemuarm	qemumips	mpc8315e-rdb	beagleboard	routerstation
failures	31	26	30	34	32	33	32	69

Previous Milestone

Yocto 1.1 M1

environment OpenPOSIX version: posixtestsuite-1.5.2.tar

profile: poky-image-sdk

run command: ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

result

Status	sugarbay	blacksand	qemuppc	qemuarm	qemumips	mpc8315e-rdb	beagleboard	routerstation
failures	50	48	35	49	43	49	46	84

Yocto 1.0 M2

environment OpenPOSIX version: posixtestsuite-1.5.2.tar

profile: poky-image-sdk

run command: ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

result

Status	qemux86	qemu-x86_64	qemuppc	qemuarm	qemumips	atom-pc	blacksand	beagleboard	routerstation
failures	1744	1744	1745	1750	1753	1753	1744	1755	1754

The major problem for high failure numbers here is due to one environmental issue. It's suggested to uncomment below line from LDFLAGS file:

#-D_XOPEN_SOURCE=600 -lpthread -lrt -lm

libpthread and librt are critical for posix interface test. Without doing this the majority of the failures are link failures being failed to find necessary libraries.

My quick test on qemux86 shows that the failure could be reduced a lot to <200 in a rough run

Based on above fact, no more analysis is done on 1.0-M2 posix results. The thorough analysis will be postponed to 1.0-M3 which will use the right test steps and newer 2.6.37 kernel