POSIX-results

From Yocto Project
Revision as of 07:59, 5 January 2012 by Kai.kang (talk | contribs) (→‎1.1)
Jump to navigationJump to search

Introduction

This page records the POSIX test results of Yocto 1.2. You can get more informations from POSIX test overall on Yocto. The test suite is from ltp and version 20110915. Six platforms are included: qemu-arm qemu-ppc qemu-mips beagleboard mpc8315rdb routerstation. There are 1794 test cases in total, only failed items are list here.

All POSIX test cases can be get at POSIX git repository.

The online POSIX specification could be viewed at IEEE Std 1003.1, 2004 Edition.

Results and analysis

The results of groups SIG SEM THR TMR MSG TPS MEM are listed. Conclusion of some test cases have been given.

Value of clumn "status":

Bug: it is a bug and the test case needs to be fixed.

Ignore: the case is not appropriate for the hardware or linux

POSIX: that test case is in development, that causes the test fails

SIG

1.2 M1 RC2

POSIX cases status platforms error msg analysis bugzilla
sigaltstack/9-1 sugarbay blacksand conformance/interfaces/sigaltstack/9-1: execution: UNRESOLVED n/a
sigset/7-1 sugarbay blacksand conformance/interfaces/sigset/7-1: execution: UNRESOLVED n/a
sigset/6-1 sugarbay blacksand conformance/interfaces/sigset/6-1: execution: UNRESOLVED n/a
sigqueue/9-1 blacksand conformance/interfaces/sigqueue/9-1: execution: UNRESOLVED n/a

1.1

POSIX cases status platforms error msg analysis bugzilla
sigaction/16-1 Ignore qemu-mips routerstation "test not present" NO SIGSTKFLT on mips platform. Signals are defined in /usr/include/bits/signum.h n/a

SEM

1.2 M1 RC2

POSIX cases status platforms error msg analysis bugzilla
sem_post/8-1 blacksand conformance/interfaces/sem_post/8-1: execution: FAILED n/a

1.1

POSIX cases status platforms error msg analysis bugzilla
sem_init/7-1 ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand can't test: There is no constraint on SEM_NSEMS_MAX _SC_SEM_NSEMS_MAX is not supported by sysconf(). In implement it check whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1. No SEM_NSEMS_MAX defined in Yocto Ubuntu and Fedora n/a

THR

1.2 M1 RC2

POSIX cases status platforms error msg analysis bugzilla
pthread_cond_init/2-2 sugarbay conformance/interfaces/pthread_cond_init/2-2: execution: FAILED n/a
pthread_cond_init/1-3 sugarbay conformance/interfaces/pthread_cond_init/1-3: execution: HUNG n/a
pthread_mutex_getprioceiling/1-1 sugarbay blacksand conformance/interfaces/pthread_mutex_getprioceiling/1-1: execution: FAILED n/a
pthread_mutex_init/5-3 sugarbay conformance/interfaces/pthread_mutex_init/5-3: execution: SIGNALED n/a
pthread_cancel/5-2 blacksand conformance/interfaces/pthread_cancel/5-2: execution: UNRESOLVED n/a

1.1

POSIX cases status platforms error msg analysis bugzilla
pthread_cond_broadcast/1-2 Bug qemu-arm beagleboard HUNG - "timeout" die lock issue n/a
pthread_create/1-6 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass n/a
pthread_create/10-1 POSIX qemu-arm beagleboard qemu-mips routerstation Segmentation fault test case use an uninitialized attributes object to case pthread_create() segmentation fault then catch the signal. But the uninitialized object is NOT invalid to pthread_create() all the time n/a
pthread_create/14-1 routerstation Segmentation fault test failed 6/10 times n/a
pthread_mutex_lock/3-1 POSIX (send patch) qemu-arm beagleboard routerstation qemu-mips mpc8315e User defined signal 2 Signals are sended before install signal handler n/a
pthread_rwlock_rdlock/2-1 Ignore(unsupport) qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option Thread Execution Scheduling of pthread rwlock. But eglibc/libc don't support this option. They provide a __flags option to identify perfer 'read lock' or read lock, and the default is 'read lock' first. A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
pthread_rwlock_rdlock/2-2 Ignore(unsupport) qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
pthread_rwlock_unlock/3-1 Ignore(unsupport) qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1

TMR

1.2 M1 RC2

POSIX cases status platforms error msg analysis bugzilla
clock_getcpuclockid/6-1 sugarbay blacksand conformance/interfaces/clock_getcpuclockid/6-1: execution: UNRESOLVED

1.1

POSIX cases status platforms error msg analysis bugzilla
timer_getoverrun/3-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return UNTESTED N/A
timer_getoverrun/2-3 Bug qemu-arm beagleboard routerstation "WR: Change CONFIG_HZ from 100 to 250 can solve this." The root cause is that these platform don't provide HIGH RESOLUTION TIMER. The value on platforms which test case can pass is only 1 nanosecond. But on qemuarm is 10000000 nanoseconds, on routerstation is 4000250 nanoseconds. After set
 CONFIG_HIGH_RES_TIMER=y

for routerstation (CONFIG_HZ=250 is already set), test case passes.

These 2 kernel configurations for qemuarm are not permitted.

Bug 1827
clock_getcpuclockid/5-1 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand clock_getcpuclockid(1, ..) passed unexpectedly Permission issue. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.

This is not supported by Linux. In man page, it addresses EPERM " does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.".

clock_getcpuclockid() is implemented in eglibc source file libc/sysdeps/unix/sysv/linux/clock_getcpuclockid.c, call system call clock_getres() without permission check

n/a

MSG

1.2 M1 RC2

None

1.1

POSIX cases status platforms error msg analysis bugzilla
mq_timedreceive/5-2 Ignore qemu-ppc qemu-mips subarbay blacksand The time() can not specifies an abs_timeout to mq_timedreceiver () for preempt_rt kernel n/a
mq_timedreceive/10-2 Bug qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e subarbay blacksand
 FAIL: the validity of
 abs_timeout is checked
 Test FAILED
Pass a invalid parameter and when no need to wait mq_timedreceive should not check the timeout value. This is described in IEEE Std 1003.1-2008 POSIX Base Specifications, Issue 7, line 43787-43889.

In linux implementation, mq_timedreceive is defined in ipc/mqueue.c. It will call prepare_timeout() ==> timespec_valid() to validate the parameter abs_timeout before to get the message queue info.

n/a
mq_timedsend/5-1 POSIX/Patched qemu-ppc qemu-mips
 Child never interrupted
 mq_send() didn't appear
 to complete
 Test FAILED
It fails random, because test case expect parent process sleep first and then child send signal to notify the parent, then the test pass. But the parent doesn't have chance to sleep before the child send the signal. n/a
mq_close/5-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
mq_open/4-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
mq_open/10-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
mq_open/14-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
mq_open/17-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
mq_open/22-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
mq_open/24-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
mq_open/25-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
mq_open/28-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
mq_open/30-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
mq_send/6-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
mq_timedsend/6-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
mq_timedsend/17-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
mq_unlink/2-3 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a

TPS

1.2 M1 RC2

POSIX cases status platforms error msg analysis bugzilla
sched_setparam/9-1 blacksand conformance/interfaces/sched_setparam/9-1: execution: FAILED n/a
sched_setscheduler/17-5 sugarbay blacksand conformance/interfaces/sched_setscheduler/17-5: execution: UNRESOLVED n/a

1.1

POSIX cases status platforms error msg analysis bugzilla
sched_getparam/6-1 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand sched_getparam is a system call, and defined in kernel/sched.c:L5510. Current security policy is "Unix Discretionary Access Control", and it doesn't perform any permission check.
WR: A permission test. On Linux, the kernel makes no check on user permission to call this API. 
So basically we don't know on what condition a system should return EPERM. It is implementation defined. 
sched_getscheduler/7-1 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand WR: A permission test. On Linux, the kernel makes no check on user permission to call this API. So basically we don't know on what condition a system should return EPERM. It is implementation defined. n/a
sched_yield/1-1 Bug / Fixed qemu-arm qemu-mips routerstation qemu-ppc mpc8315e beagleboard SIGINT is trapped by bin/run-test.sh n/a
sched_get_priority_max/1-3 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_get_priority_min/1-3 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a


sched_getscheduler/2-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
sched_setparam/3-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
sched_setparam/6-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
sched_setparam/7-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
sched_setparam/8-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
sched_setparam/12-1 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setparam/13-1 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setparam/14-1 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setparam/15-1 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setparam/16-1 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setparam/17-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
sched_setparam/18-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
sched_setparam/19-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
sched_setparam/20-1 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux n/a
sched_setparam/21-1 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux n/a
sched_setparam/21-2 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux n/a
sched_setparam/23-2 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setparam/23-3 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setparam/23-4 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setparam/23-5 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a


sched_setparam/25-2 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a


sched_setparam/25-3 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a


sched_setparam/25-4 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a


sched_setscheduler/2-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a


sched_setscheduler/5-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a


sched_setscheduler/6-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a


sched_setscheduler/7-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a


sched_setscheduler/9-1 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setscheduler/10-1 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setscheduler/11-1 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setscheduler/12-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a


sched_setscheduler/13-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
sched_setscheduler/14-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
sched_setscheduler/15-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
sched_setscheduler/15-2 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
sched_setscheduler/17-2 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setscheduler/17-3 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setscheduler/17-4 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setscheduler/19-2 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setscheduler/19-3 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setscheduler/19-4 Ignore qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Schedule policy SCHED_SPORADIC is not supported by linux n/a
sched_setscheduler/22-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a
sched_setscheduler/22-2 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Just print something and then return n/a

MEM

1.2 M1 RC2

POSIX cases status platforms error msg analysis bugzilla
mlockall/3-7 sugarbay blacksand conformance/interfaces/mlockall/3-7: execution: UNRESOLVED n/a

1.1

Note: from LTP/POSIX maintainer Cyril say: "At least the mmap/31-1, mmap/28-1, mmap/27-1, mmap/24-2, mmap/11-4 and mmap/11-5 are known to fail sometimes and most likely are coded incorrecly."


So these cases should exclude from test list.


POSIX cases status platforms error msg analysis bugzilla
mmap/11-4 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand

pa: 0x400fb000

pa_2: 0x40115000

Modification of the partial page at the end of an object is written out

Test case map a file with size of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'. Test on all platforms are failed. The reason is after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.

mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the Page Fault Exception Handler to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.

n/a
mmap/11-5 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand Modification of the partial page at the end of an object is written out Same with mmap/11-4, and this test case is to test share memory, so file->f_op->mmap() point to shm_fault() in ipc/shm.c, then it call shmem_fault() ==> shmem_getpage() ==> shmem_getpage_gfp() ==> find_lock_page(). In find_lock_page() it will search the desired pagecache page. n/a
mmap/27-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand eglibc has define macro MAP_FIXED, and test case check MAP_FIXED defined then quit with PTS_UNTESTED n/a
mmap/28-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand test mmap() with lenght 2 timed file size expect fail with errno ENXIO( No such device or address) but successed. n/a
mmap/31-1 POSIX qemu-arm qemu-ppc mpc8315e beagleboard sugarbay blacksand

off: fffff000, len: fffff000

expect EOVERFLOW but get other error: Cannot allocate memory

Parameters lenth and offset for mmap() are too large. Case 24-2 with same length expects mmap() failed with ENOMEM.

In function get_unmapped_area(), it checks len should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value on different platforms

beagleboard    0xC0000000 - 0x01000000 = 0xBF000000
mpc8315e       0xc0000000
routerstation  0x7fff8000UL
sugarbay       0xffff880000000000
n/a
shm_open/23-1 Ignore qemu-ppc HUNG qemu-ppc is too slow to fork and schedule, parent process create 1000 child processes and then wait children quit and then it time out. Limited to hardware. n/a
shm_open/2-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand test code just return PTS_UNTESTED and do nothing n/a
shm_open/3-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand test code just return PTS_UNTESTED and do nothing n/a
shm_open/6-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand test code just return PTS_UNTESTED and do nothing n/a
shm_open/7-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand test code just return PTS_UNTESTED and do nothing n/a
shm_open/9-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand test code just return PTS_UNTESTED and do nothing n/a
shm_open/10-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand test code just return PTS_UNTESTED and do nothing n/a
shm_open/12-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand test code just return PTS_UNTESTED and do nothing n/a
shm_open/19-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand test code just return PTS_UNTESTED and do nothing n/a
shm_open/24-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand test code just return PTS_UNTESTED and do nothing n/a
shm_open/27-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand test code just return PTS_UNTESTED and do nothing n/a
shm_open/29-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand test code just return PTS_UNTESTED and do nothing n/a
shm_open/36-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand test code just return PTS_UNTESTED and do nothing n/a
shm_open/42-1 POSIX qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand test code just return PTS_UNTESTED and do nothing n/a