Arduino Single power control unit
From Yocto Project
Jump to navigationJump to search
In order to build a power cutter using a relay module, one must follow the circuit provided in the attachment. Required hardware: - 1 BJT transistor 2N2222A - 1 3.3 kOhms resistor - 1 1N4007 diode - 1 relay module (RAS-0510) - 1 Protoboard or perforated PCB (min 4.5x4.5 cm) - 1 Two positions terminal block - 1 male outlet connector and 1 female outlet plug - 14AWG Wire (as needed)
