Qemuarm-ltp

1.0/M1

total: 37

similarity: 29 (78.00%):

       chdir01A fallocate01 fallocate02 fallocate03 getcontext01 splice02 utimensat01 hackbench01 

audit: 33 (89%)

• LTP: 0

• NAB: 0

• Fixed: 0

• Matched: 29

pending: 4

not started: 4

LTP cases	status	owner	error msg	lsb	comment	bugzilla
getcontext01	not started	n/a	n/a	n/a	n/a	n/a
utimensat01	not started	n/a	n/a	n/a	n/a	n/a
hackbench01	not started	n/a	n/a	n/a	n/a	n/a
splice02	not started	n/a	n/a	n/a	n/a	n/a
chdir01A	pending	Kevin Tian	symlink(object, symbolic) was succesful. mkdir(object, 0700) was successful chdir(2) returned successfully, but getcwd(3) indicated new current working directory location /var/volatile/tmp/ltp-XXXXK9vOzf/chdNQdk3G/object not equal to expected /tmp/ltp-XXXXK9vOzf/chdNQdk3G/object	n/a	n/a	n/a
fallocate01	pending	Kevin Tian	fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	This case is expected to return -EOPNOSUPP and then LTP will skip it. However on qemuarm/qemumips -EFBIG is returned earlier, and thus trigger this failure. Actually I don't understand why this will happen, and any offset/length returns same failure. fallocate from util-linux could trigger this failure too.	[bug678]
fallocate02	pending	Kevin Tian	fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	same as fallocate01	[bug678]
fallocate03	pending	Kevin Tian	fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	same as fallocate01	[bug678]
ioctl03	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02_16	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	qemux86	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	qemux86	n/a	n/a	n/a	n/a	n/a
ldd	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
tar	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a