POSIX-results

Introduction

This page records the POSIX test results of Yocto 1.2. The test suite is from ltp and version 20110915. Six platforms are included: qemu-arm qemu-ppc qemu-mips beagleboard mpc8315rdb routerstation. There are 1794 test cases in total, only failed items are list here.

Results and analysis

The results of groups SIG SEM THR TMR MSG TPS MEM are listed. Conclusion of some test cases have been given.

Value of clumn "status":

Bug: it is a bug and the test case needs to be fixed.

Ignore: the case is not appropriate for the hardware or linux

POSIX: that test case is in development, that causes the test fails

SIG

POSIX cases	status	platforms	error msg	analysis	bugzilla
sigaction/16-1	Ignore	qemu-mips routerstation	"test not present"	NO SIGSTKFLT on mips platform. Signals are defined in /usr/include/bits/signum.h	n/a

SEM

POSIX cases	status	platforms	error msg	analysis	bugzilla
sem_init/7-1	ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e	can't test: There is no constraint on SEM_NSEMS_MAX	_SC_SEM_NSEMS_MAX is not supported by sysconf(). In implement it check whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1. No SEM_NSEMS_MAX defined in Yocto Ubuntu and Fedora	n/a

THR

POSIX cases	status	platforms	error msg	analysis	bugzilla
pthread_cond_broadcast/1-2	Bug	qemu-arm beagleboard	HUNG - "timeout"	die lock issue	n/a
pthread_create/1-6	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass	n/a
pthread_create/10-1	POSIX	qemu-arm beagleboard qemu-mips routerstation	Segmentation fault	test case use an uninitialized attributes object to case pthread_create() segmentation fault then catch the signal. But the uninitialized object is NOT invalid to pthread_create() all the time	n/a
pthread_create/14-1		routerstation	Segmentation fault	test failed 6/10 times	n/a
pthread_mutex_lock/3-1	POSIX (send patch)	qemu-arm beagleboard routerstation qemu-ppc mpc8315e	User defined signal 2	Signals are sended before install signal handler	n/a
pthread_rwlock_rdlock/2-1		qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e	Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block.
pthread_rwlock_rdlock/2-2		qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e	Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block.
pthread_rwlock_unlock/3-1		qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e	Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'.

TMR

POSIX cases	status	platforms	error msg	analysis	bugzilla
timer_getoverrun/3-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return UNTESTED	n/a
timer_getoverrun/2-3		qemu-arm beagleboard routerstation		"WR: Change CONFIG_HZ from 100 to 250 can solve this." The root cause is that these platform don't provide HIGH RESOLUTION TIMER. The value on platforms which test case can pass is only 1 nanosecond. But on qemuarm is 10000000 nanoseconds, on routerstation is 4000250 nanoseconds. After set CONFIG_HIGH_RES_TIMER=y for routerstation (CONFIG_HZ=250 has been set), test case passes. These 2 kernel configurations for qemuarm are not permitted.	n/a
clock_getcpuclockid/5-1	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e	clock_getcpuclockid(1, ..) passed unexpectedly	Permission issue. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM. This is not supported by Linux. In man page, it addresses EPERM " does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process."	n/a

MSG

POSIX cases	status	platforms	error msg	analysis	bugzilla
mq_timedreceive/5-2	Ignore	qemu-ppc qemu-mips mpc8315		The time() can not specifies an abs_timeout to mq_timedreceiver () for preempt_rt kernel	n/a
mq_timedreceive/10-2	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Pass a invalid parameter and expect mq_timedreceive doesn't check it. In linux implement, it will call timespec_valid() to validate the parameter abs_timeout.	n/a
mq_close/5-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
mq_open/4-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
mq_open/10-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
mq_open/14-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
mq_open/17-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
mq_open/22-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
mq_open/24-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
mq_open/25-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
mq_open/28-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
mq_open/30-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
mq_send/6-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
mq_timedsend/6-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
mq_timedsend/17-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
mq_unlink/2-3	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a

TPS

POSIX cases	status	platforms	error msg	analysis	bugzilla
sched_getparam/6-1	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		WR: A permission test. On Linux, the kernel makes no check on user permission to call this API. So basically we don't know on what condition a system should return EPERM. It is implementation defined.	n/a
sched_getscheduler/7-1	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		WR: A permission test. On Linux, the kernel makes no check on user permission to call this API. So basically we don't know on what condition a system should return EPERM. It is implementation defined.	n/a
sched_yield/1-1	Bug / Fixed	qemu-arm qemu-mips routerstation qemu-ppc mpc8315e		SIGINT is trapped by bin/run-test.sh	n/a
sched_get_priority_max/1-3	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_get_priority_min/1-3	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_getscheduler/2-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_getscheduler/7-1	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		WR: A permission test. On Linux, the kernel makes no check on user permission to call this API. So basically we don't know on what condition a system should return EPERM. It is implementation defined.	n/a
sched_setparam/3-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setparam/6-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setparam/7-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setparam/8-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setparam/12-1	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setparam/13-1	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setparam/14-1	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setparam/15-1	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setparam/16-1	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setparam/17-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setparam/18-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setparam/19-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setparam/20-1	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux	n/a
sched_setparam/21-1	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux	n/a
sched_setparam/21-2	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux	n/a
sched_setparam/23-2	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setparam/23-3	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setparam/23-4	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setparam/23-5	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setparam/25-2	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setparam/25-3	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setparam/25-4	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setscheduler/2-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setscheduler/5-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setscheduler/6-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setscheduler/7-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setscheduler/9-1	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setscheduler/10-1	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setscheduler/11-1	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setscheduler/12-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setscheduler/13-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setscheduler/14-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setscheduler/15-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setscheduler/15-2	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setscheduler/17-2	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setscheduler/17-3	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setscheduler/17-4	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setscheduler/19-2	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setscheduler/19-3	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setscheduler/19-4	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Schedule policy SCHED_SPORADIC is not supported by linux	n/a
sched_setscheduler/22-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a
sched_setscheduler/22-2	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Just print something and then return	n/a

MEM

POSIX cases	status	platforms	error msg	analysis	bugzilla
mmap/11-4	Bug	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e	pa: 0x400fb000 pa_2: 0x40115000	Modification of the partial page at the end of an object is written out	n/a
mmap/11-5	Bug	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		Modification of the partial page at the end of an object is written out	n/a
mmap/27-1	Ignore	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		eglibc has define macro MAP_FIXED, and test case check MAP_FIXED defined then quit with PTS_UNTESTED	n/a
mmap/28-1	Bug	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		test mmap() with 4 timed page size expect fail with errno ENXIO( No such device or address) but successed.	n/a
mmap/31-1	Bug	qemu-arm qemu-ppc mpc8315e beagleboard	off: fffff000, len: fffff000	expect EOVERFLOW but get other error: Cannot allocate memory	n/a
shm_open/23-1	Bug	qemu-ppc	HUNG	Create too many (1000) semphores for qemu-ppc, maybe limited to hardware	n/a
shm_open/2-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		test code just return PTS_UNTESTED and do nothing	n/a
shm_open/3-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		test code just return PTS_UNTESTED and do nothing	n/a
shm_open/6-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		test code just return PTS_UNTESTED and do nothing	n/a
shm_open/7-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		test code just return PTS_UNTESTED and do nothing	n/a
shm_open/9-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		test code just return PTS_UNTESTED and do nothing	n/a
shm_open/10-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		test code just return PTS_UNTESTED and do nothing	n/a
shm_open/12-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		test code just return PTS_UNTESTED and do nothing	n/a
shm_open/19-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		test code just return PTS_UNTESTED and do nothing	n/a
shm_open/24-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		test code just return PTS_UNTESTED and do nothing	n/a
shm_open/27-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		test code just return PTS_UNTESTED and do nothing	n/a
shm_open/29-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		test code just return PTS_UNTESTED and do nothing	n/a
shm_open/36-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		test code just return PTS_UNTESTED and do nothing	n/a
shm_open/42-1	POSIX	qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e		test code just return PTS_UNTESTED and do nothing	n/a