POSIX-results
From Yocto Project
Jump to navigationJump to search
POSIX test results
| POSIX cases | status | platforms | error msg | analysis | bugzilla | |
| SIG | ||||||
| sigaction/16-1 | Blacklist | qemu-mips routerstation | "test not present" | NO SIGSTKFLT on mips platform | n/a
| |
| THR | ||||||
| pthread_cond_broadcast/1-2 | qemu-arm beagleboard | HUNG - "timeout" | Create too many children thread and can NOT finish in "TIMEOUT" | n/a | ||
| pthread_create/1-6 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass | n/a | ||
| pthread_create/10-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation | Segmentation fault | test case use an uninitialized attributes object to case pthread_create() segmentation fault then catch the signal. But the uninitialized object is NOT invalid to pthread_create() all the time | n/a | |
| pthread_create/14-1 | routerstation | Segmentation fault | test failed 6/10 times | n/a | ||
| pthread_mutex_lock/3-1 | qemu-arm beagleboard routerstation qemu-ppc mpc8315e | User defined signal 2 | ||||
| pthread_rwlock_rdlock/2-1 | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | |||||
| pthread_rwlock_rdlock/2-2 | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | |||||
| pthread_rwlock_rdlock/3-1 | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e |
| ||||
| TMR | ||||||
| timer_getoverrun/3-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return UNTESTED | n/a | ||
| timer_getoverrun/2-3 | qemu-arm beagleboard routerstation(qemu-mips??) | WR: Change CONFIG_HZ from 100 to 250 can solve this. | ||||
| clock_getcpuclockid/5-1 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Permission issue. Unpriviledge user can access process 'init' cpu time by clock_getcpuclockid. | n/a
| ||
| MSG | ||||||
| mq_close/5-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| mq_open/4-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| mq_open/10-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| mq_open/14-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| mq_open/17-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| mq_open/22-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| mq_open/24-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| mq_open/25-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| mq_open/28-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| mq_open/30-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| mq_send/6-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| mq_timedreceive/5-2 | Blacklist | qemu-ppc qemu-mips mpc8315 | The time() can not specifies an abs_timeout to mq_timedreceiver () for preempt_rt kernel | n/a | ||
| mq_timedreceive/10-2 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | The time() can not specifies an abs_timeout to mq_timedreceiver () for preempt_rt kernel | n/a | ||
| mq_timedsend/5-1 | PASS now | qemu-ppc qemu-mips | ||||
| mq_timedsend/6-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| mq_timedsend/17-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| mq_unlink/2-3 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a
| ||
| TPS | ||||||
| sched_get_priority_max/1-3 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_get_priority_min/1-3 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_getparam/6-1 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | WR: A permission test. On Linux, the kernel makes no check on user permission to call this API. So basically we don't know on what condition a system should return EPERM. It is implementation defined. | n/a | ||
| sched_getscheduler/2-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| sched_getscheduler/7-1 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | WR: A permission test. On Linux, the kernel makes no check on user permission to call this API. So basically we don't know on what condition a system should return EPERM. It is implementation defined. | n/a | ||
| sched_setparam/3-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| sched_setparam/6-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| sched_setparam/7-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| sched_setparam/8-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| sched_setparam/12-1 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setparam/13-1 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setparam/14-1 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setparam/15-1 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setparam/16-1 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setparam/17-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| sched_setparam/18-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| sched_setparam/19-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| sched_setparam/20-1 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux | n/a | ||
| sched_setparam/21-1 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux | n/a | ||
| sched_setparam/21-2 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux | n/a | ||
| sched_setparam/23-2 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setparam/23-3 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setparam/23-4 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setparam/23-5 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a
| ||
| sched_setparam/25-2 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a
| ||
| sched_setparam/25-3 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a
| ||
| sched_setparam/25-4 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a
| ||
| sched_yield/1-1 | Bug | qemu-arm qemu-mips routerstation qemu-ppc mpc8315e | SIGINT is trapped by bin/run-test.sh | n/a | ||
| sched_setscheduler/2-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a
| ||
| sched_setscheduler/5-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a
| ||
| sched_setscheduler/6-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a
| ||
| sched_setscheduler/7-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a
| ||
| sched_setscheduler/9-1 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setscheduler/10-1 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setscheduler/11-1 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setscheduler/12-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a
| ||
| sched_setscheduler/13-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| sched_setscheduler/14-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| sched_setscheduler/15-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| sched_setscheduler/15-2 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| sched_setscheduler/17-2 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setscheduler/17-3 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setscheduler/17-4 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setscheduler/19-2 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setscheduler/19-3 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setscheduler/19-4 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | ||
| sched_setscheduler/22-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | ||
| sched_setscheduler/22-2 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a
| ||
| MEM | ||||||
| mmap/11-4 | Bug | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | pa: 0x400fb000 pa_2: 0x40115000 | Modification of the partial page at the end of an object is written out | n/a | |
| mmap/11-5 | Bug | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Modification of the partial page at the end of an object is written out | n/a | ||
| mmap/27-1 | Blacklist | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | libc has define macro MAP_FIXED, and test case check MAP_FIXED defined then quit with PTS_UNTESTED | n/a | ||
| mmap/28-1 | Bug | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test mmap() with 4 timed page size expect fail with errno ENXIO( No such device or address) but successed. | n/a | ||
| mmap/31-1 | Bug | qemu-arm qemu-ppc mpc8315e beagleboard | off: fffff000, len: fffff000 | expect EOVERFLOW but get other error: Cannot allocate memory | n/a | |
| shm_open/2-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | ||
| shm_open/3-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | ||
| shm_open/6-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | ||
| shm_open/7-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | ||
| shm_open/9-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | ||
| shm_open/10-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | ||
| shm_open/12-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | ||
| shm_open/19-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | ||
| shm_open/23-1 | Bug | qemu-ppc | HUNG | Create too many (1000) semphores for qemu-ppc, maybe limited to hardware | n/a | |
| shm_open/24-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | ||
| shm_open/27-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | ||
| shm_open/29-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | ||
| shm_open/36-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | ||
| shm_open/42-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a |
