AutoBuilder Cluster Setup

autobuilder cluster setup

As root

Install base OS with minimal target
Add pokybuild user (uid=6000, or for older clusters 1006)
Add pokybuild user to "users" group (gid 100) [if "users" group does not exist, create it]
If a "kvm" group does not exist, add it to /etc/group and ensure /dev/kvm gid is set to "kvm" and is mode 660. Add pokybuild user to group "kvm" group
Install the requirements from http://www.yoctoproject.org/docs/current/yocto-project-qs/yocto-project-qs.html
git clone --single-branch http://git.yoctoproject.org/git/poky /root/poky (in /root for historical reasons, should change in the future)
Install http://downloads.yoctoproject.org/releases/yocto/yocto-{latest release}/toolchain/x86_64/poky-glibc-x86_64-core-image-sato-core2-64-toolchain-{relver}.sh to /opt/poky
Add startup scripts to create tap devs and start vncserver, in /etc/rc.local, /etc/init.d/boot.local, or as systemd unit files, should perform the following
- cd /root/poky/scripts/; ./runqemu-gen-tapdevs 6000 100 32 /opt/poky/sysroots/x86_64-pokysdk-linux/
- /bin/su - pokybuild -c "/usr/bin/vncserver"
Disable or edit firewall rules to allow all connections to the tap devices. This allows sanity tests to connect to booted images.
Install nfs-utils or nfs-common, add Domain to /etc/idmapd.conf, fstab entry, mount NAS

Set up buildset-config, either:
- Add ssh key to clone production yocto-autobuilder
- git clone http://git.yoctoproject.org/git/yocto-autobuilder && cd yocto-autobuilder && git remote add prod git@git.yoctoproject.org:yocto-autobuilder-production && git fetch prod && git checkout -b yoctoio prod/yoctoio
or:
- edit one of the several examples included in repo e.g. cp -r buildset-config.controller buildset-config

update config/autobuilder.conf and yocto-worker/buildbot.tac
Start the worker
- touch ~/yocto-autobuilder/.setupdone
- . yocto-autobuilder-setup
- ./yocto-start-autobuilder worker