POSIX-results
From Yocto Project
Jump to navigationJump to search
Introduction
This page records the POSIX test results of Yocto 1.2. The test suite is from ltp and version 20110915. Six platforms are included: qemu-arm qemu-ppc qemu-mips beagleboard mpc8315rdb routerstation. There are 1794 test cases in total, only failed items are list here.
Results and analysis
The results of groups SIG SEM THR TMR MSG TPS MEM are listed. Conclusion of some test cases have been given.
Value of clumn "status":
Bug: it is a bug and the test case needs to be fixed.
Ignore: the case is not appropriate for the hardware or linux
POSIX: that test case is in development, that causes the test fails
SIG
POSIX cases | status | platforms | error msg | analysis | bugzilla |
sigaction/16-1 | Ignore | qemu-mips routerstation | "test not present" | NO SIGSTKFLT on mips platform | n/a |
SEM
POSIX cases | status | platforms | error msg | analysis | bugzilla |
sem_init/7-1 | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | UNTESTED | _SC_SEM_NSEMS_MAX is not supported by sysconf() |
THR
POSIX cases | status | platforms | error msg | analysis | bugzilla | |
pthread_cond_broadcast/1-2 | qemu-arm beagleboard | HUNG - "timeout" | Create too many children thread and can NOT finish in "TIMEOUT" | n/a | ||
pthread_create/1-6 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass | n/a | ||
pthread_create/10-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation | Segmentation fault | test case use an uninitialized attributes object to case pthread_create() segmentation fault then catch the signal. But the uninitialized object is NOT invalid to pthread_create() all the time | n/a | |
pthread_create/14-1 | routerstation | Segmentation fault | test failed 6/10 times | n/a | ||
pthread_mutex_lock/3-1 | qemu-arm beagleboard routerstation qemu-ppc mpc8315e | User defined signal 2 | ||||
pthread_rwlock_rdlock/2-1 | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | |||||
pthread_rwlock_rdlock/2-2 | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | |||||
pthread_rwlock_rdlock/3-1 | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e |
TMR
POSIX cases | status | platforms | error msg | analysis | bugzilla |
timer_getoverrun/3-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return UNTESTED | n/a | |
timer_getoverrun/2-3 | qemu-arm beagleboard routerstation(qemu-mips??) | WR: Change CONFIG_HZ from 100 to 250 can solve this. | |||
clock_getcpuclockid/5-1 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Permission issue. Unpriviledge user can access process 'init' cpu time by clock_getcpuclockid. | n/a |
MSG
POSIX cases | status | platforms | error msg | analysis | bugzilla |
mq_timedreceive/5-2 | Ignore | qemu-ppc qemu-mips mpc8315 | The time() can not specifies an abs_timeout to mq_timedreceiver () for preempt_rt kernel | n/a | |
mq_timedreceive/10-2 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | The time() can not specifies an abs_timeout to mq_timedreceiver () for preempt_rt kernel | n/a
| |
mq_close/5-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
mq_open/4-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
mq_open/10-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
mq_open/14-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
mq_open/17-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
mq_open/22-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
mq_open/24-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
mq_open/25-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
mq_open/28-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
mq_open/30-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
mq_send/6-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
mq_timedsend/6-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
mq_timedsend/17-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
mq_unlink/2-3 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a |
TPS
POSIX cases | status | platforms | error msg | analysis | bugzilla |
sched_getparam/6-1 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | WR: A permission test. On Linux, the kernel makes no check on user permission to call this API. So basically we don't know on what condition a system should return EPERM. It is implementation defined. | n/a | |
sched_getscheduler/7-1 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | WR: A permission test. On Linux, the kernel makes no check on user permission to call this API. So basically we don't know on what condition a system should return EPERM. It is implementation defined. | n/a | |
sched_yield/1-1 | Bug | qemu-arm qemu-mips routerstation qemu-ppc mpc8315e | SIGINT is trapped by bin/run-test.sh | n/a | |
sched_get_priority_max/1-3 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_get_priority_min/1-3 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a
| |
sched_getscheduler/2-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
sched_getscheduler/7-1 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | WR: A permission test. On Linux, the kernel makes no check on user permission to call this API. So basically we don't know on what condition a system should return EPERM. It is implementation defined. | n/a | |
sched_setparam/3-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
sched_setparam/6-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
sched_setparam/7-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
sched_setparam/8-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
sched_setparam/12-1 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setparam/13-1 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setparam/14-1 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setparam/15-1 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setparam/16-1 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setparam/17-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
sched_setparam/18-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
sched_setparam/19-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
sched_setparam/20-1 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux | n/a | |
sched_setparam/21-1 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux | n/a | |
sched_setparam/21-2 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux | n/a | |
sched_setparam/23-2 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setparam/23-3 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setparam/23-4 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setparam/23-5 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a
| |
sched_setparam/25-2 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a
| |
sched_setparam/25-3 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a
| |
sched_setparam/25-4 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a
| |
sched_setscheduler/2-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a
| |
sched_setscheduler/5-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a
| |
sched_setscheduler/6-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a
| |
sched_setscheduler/7-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a
| |
sched_setscheduler/9-1 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setscheduler/10-1 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setscheduler/11-1 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setscheduler/12-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a
| |
sched_setscheduler/13-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
sched_setscheduler/14-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
sched_setscheduler/15-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
sched_setscheduler/15-2 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
sched_setscheduler/17-2 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setscheduler/17-3 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setscheduler/17-4 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setscheduler/19-2 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setscheduler/19-3 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setscheduler/19-4 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Schedule policy SCHED_SPORADIC is not supported by linux | n/a | |
sched_setscheduler/22-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a | |
sched_setscheduler/22-2 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Just print something and then return | n/a |
MEM
POSIX cases | status | platforms | error msg | analysis | bugzilla |
mmap/11-4 | Bug | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | pa: 0x400fb000 pa_2: 0x40115000 | Modification of the partial page at the end of an object is written out | n/a |
mmap/11-5 | Bug | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | Modification of the partial page at the end of an object is written out | n/a | |
mmap/27-1 | Ignore | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | libc has define macro MAP_FIXED, and test case check MAP_FIXED defined then quit with PTS_UNTESTED | n/a | |
mmap/28-1 | Bug | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test mmap() with 4 timed page size expect fail with errno ENXIO( No such device or address) but successed. | n/a | |
mmap/31-1 | Bug | qemu-arm qemu-ppc mpc8315e beagleboard | off: fffff000, len: fffff000 | expect EOVERFLOW but get other error: Cannot allocate memory | n/a |
shm_open/23-1 | Bug | qemu-ppc | HUNG | Create too many (1000) semphores for qemu-ppc, maybe limited to hardware | n/a |
shm_open/2-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | |
shm_open/3-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | |
shm_open/6-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | |
shm_open/7-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | |
shm_open/9-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | |
shm_open/10-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | |
shm_open/12-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | |
shm_open/19-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | |
shm_open/24-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | |
shm_open/27-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | |
shm_open/29-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | |
shm_open/36-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a | |
shm_open/42-1 | POSIX | qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e | test code just return PTS_UNTESTED and do nothing | n/a |