How do I

Q: How do get the package manager binaries on my target rootfs?

A: Make sure your image has IMAGE_FEATURES += "package-management" included.

Q: How do I put yocto on a hard drive?

A: bitbake core-image-sato or core-image-sato-sdk

1. have a suitable partition on the disk - say partition #3
2. this partition will show up as sde3 on my host machine and sda3 on the atom
3. mkfs.ext3 /dev/sde3
4. mount /dev/sde3 /mnt/target
5. mount -o loop tmp/deploy/images/core-image-sato-sdk.ext3 /mnt/target-ext3
6. cp -a /mnt/target-ext3/* /mnt/target
7. grub-install --recheck --root-directory=/mnt/target /dev/sde

If grub install passed, copy the following to /mnt/target/boot/grub/grub.cfg

set default="0"
set timeout="30"

menuentry 'Yocto SDK' {
      insmod part_msdos
      insmod ext2
      set root='(hd0,msdos3)'
      linux /boot/bzImage root=/dev/sda3
}

Thats it - this should boot.

Q: How do I put my recipe into Yocto?

A: Let's use the Hello World example from Section 3.1.2 of the Yocto Project Reference Manual and expand on it.

• In this example, I'll start with a new meta layer named "meta-jfa" in the Yocto Project files directory, which is named "poky". Then, I will add the new recipe and build the image, which is named "core-image-minimal". I will build it using the autotooled package option. Once built, the image will have the “hello” application.

Step One

Create the following directory structure in the ~/poky directory. I'll use my initials to denote the layer and recipe name:

mkdir meta-jfa
mkdir meta-jfa/conf
mkdir meta-jfa/recipes-jfa
mkdir meta-jfa/recipes-jfa/hello

Step Two

Next, to make sure the recipe gets searched and located, I'll create the layer.conf file in the meta-jfa/conf directory as follows:

# We have a conf and classes directory, add to BBPATH 
BBPATH := "${BBPATH}:${LAYERDIR}" 
# We have a packages directory, add to BBFILES 
BBFILES := "${BBFILES} ${LAYERDIR}/recipes-*/*/*.bb \ 
           ${LAYERDIR}/recipes-*/*/*.bbappend" 
BBFILE_COLLECTIONS += "jfa" 
BBFILE_PATTERN_jfa := "^${LAYERDIR}/" 
BBFILE_PRIORITY_jfa = "5

Step Three

Now I need to put the recipe (.bb) file into the right directory. So, I will put the file hello_2.7.bb into the meta-jfa/recipes-jfa/hello directory. I picked version 2.7 of the hello program by going to the gnu site for the application (ftp://ftp.gnu.org/gnu/hello/) and downloading it to checkout the version I wanted to include. hello-2.7.tar.gz is the most current. I downloaded it locally and expanded it to look at the license information. The hello_2.7.bb file contains the following:

DESCRIPTION = "GNU Helloworld application" 
SECTION = "examples" 
LICENSE = "GPLv3+" 
LIC_FILES_CHKSUM = "file://COPYING;md5=d32239bcb673463ab874e80d47fae504" 
PR = "r0" 
SRC_URI = "${GNU_MIRROR}/hello/hello-${PV}.tar.gz" 
inherit autotools gettext 

Here is some explanation for a few of the recipe statements:

• LIC_FILES_CHKSUM = is required and, using file location defaults, points to the COPYING file that is part of the tarball that is downloaded from the SRC_URI address. The md5= part of the statement is generated by running “md5sum COPYING” against the COPYING file I downloaded to examine.
• ${PV} in the SRC_URI statement is picked up from the part of the recipe file name after the “_”. In this case PV =2.7.

Step Four

The recipe is built, so now I can run it:

cd ~/poky
source oe-init-build-env build-hello.  

Step Five

Before I can use BitBake I need to edit two files. Sourcing the oe-init-build-env file above leaves me in the build-hello directory. Before issuing the bitbake command I need to edit the files conf/local.conf and conf/bblayers.conf in that build-hello directory. The bblayers.conf needs to have the one line added to include the layer you created.

# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf 
# changes incompatibly 
LCONF_VERSION = "4" 
BBFILES ?= "" 
BBLAYERS = " \ 
  /home/jim/poky/meta \ 
  /home/jim/poky/meta-yocto \ 
  /home/jim/poky/meta-jfa \
"

Step Six

The conf/local.conf file needs to have the parallel processing lines edited to speed up the baking on multicore systems. I can do that by uncommenting the BB_NUMBER_THREADS and PARALLEL_MAKE variables. Generally, I would set them equal to twice the number of cores used by my host machine. By default, the MACHINE variable is set to qemux86 and for this example is fine. I need to add a line to include the hello package I am building into the image by adding the following line:

POKY_EXTRA_INSTALL += "hello" 

Step Seven

Now I can bake it with this command:

bitbake core-image-minimal

Step Eight

Once the image is built, I can test it by starting the QEMU emulator:

runqemu qemux86

Step Nine

Once the emulator comes up, login as root with no password. Then, at the prompt, enter "hello" to run your application.

Q: How do I setup an Intel(r) Atom(tm) Processor E6xx based system for media playback using the accelerated GFX driver (EMGD) and other audio codecs?

A: The official support for EMGD with accelerated 3D and media decode is scheduled for release 1.2, but is in the git repository now, so I'll start with branch, master of both the poky and meta-intel repository. And I will use the Intel Crownbay reference platform for the Atom E6xx processor.

Step 1

Follow the Appendix A example in the Yocto Project Development Manual, but instead of editing out the crownbay references and using the crownbay-noemgd, you do the opposite.

One edit you need to add to the Appendix A instructions is for the file ~/poky/meta-intel/meta-mymachine/conf/mymachine.conf. You need to add the following statement to include audio features:

MACHINE_FEATURES += "alsa"

Step 2

In the Appendix A example a couple of changes are needed to the conf/local.conf and conf/bblayers.conf file edits from the standard example. The bblayers.conf file BBLAYERS statement should look like below, except correct the absolute path to match your system:

BBLAYERS ?= " \
 /home/jim/poky/meta \
 /home/jim/poky/meta-yocto \
 /home/jim/poky/meta-intel \
 /home/jim/poky/meta-intel/meta-mymachine \
 "

The local.conf file should have some statements in addition to what the Appendix A used:

LICENSE_FLAGS_WHITELIST = "license_emgd-driver-bin_1.10"

# The 2 statements below allow the playing of MP3 files
LICENSE_FLAGS_WHITELIST += "commercial"
POKY_EXTRA_INSTALL += "gst-fluendo-mp3"

# add debug development tweaks and test applications, which include amixer, aplay, arecord, etc.
EXTRA_IMAGE_FEATURES = "debug-tweaks tools-testapps"

Step 3

After bitbaking the core-image-sato image, I put the .ext3 image on a hard drive per the above How Do I. I also added some h.264, mp4, m4a, and mp3 files to play with before moving the hard drive to the target hardware system.

I used both the Sato GUI Music and Video players to play the files.

That's all there is to it.