Qemuarm-ltp: Difference between revisions

Revision as of 05:16, 16 August 2011

1.1/M3

total: 37 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
fallocate01			fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	This case is expected to return -EOPNOSUPP and then LTP will skip it. However on qemuarm/qemumips -EFBIG is returned earlier, and thus trigger this failure. Actually I don't understand why this will happen, and any offset/length returns same failure. fallocate from util-linux could trigger this failure too.	[bug678]
fallocate02			fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	same as fallocate01	[bug678]
fallocate03			fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	same as fallocate01	[bug678]
getcontext01	NAB		getcontext - Sanity test : Fail errno=38 : Function not implemented	n/a	libc doesn't implement getcontext for ARM, so this result is expected	n/a
ioctl03	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	qemux86	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	/opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M2

total: 29 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ld	LTP		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a	This is a LTP bug	[bug1162]
fallocate01			fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	This case is expected to return -EOPNOSUPP and then LTP will skip it. However on qemuarm/qemumips -EFBIG is returned earlier, and thus trigger this failure. Actually I don't understand why this will happen, and any offset/length returns same failure. fallocate from util-linux could trigger this failure too.	[bug678]
fallocate02			fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	same as fallocate01	[bug678]
fallocate03			fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	same as fallocate01	[bug678]
getcontext01	NAB		getcontext - Sanity test : Fail errno=38 : Function not implemented	n/a	libc doesn't implement getcontext for ARM, so this result is expected	n/a
ioctl03	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	qemux86	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	/opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.1/M1

total: 29 (100%)

LTP cases	status	owner	error msg	lsb	comment	bugzilla
ld	NEW		Assertion 1 .................. -) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg	n/a		[bug1162]
fallocate01			fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	This case is expected to return -EOPNOSUPP and then LTP will skip it. However on qemuarm/qemumips -EFBIG is returned earlier, and thus trigger this failure. Actually I don't understand why this will happen, and any offset/length returns same failure. fallocate from util-linux could trigger this failure too.	[bug678]
fallocate02			fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	same as fallocate01	[bug678]
fallocate03			fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	same as fallocate01	[bug678]
getcontext01	NAB		getcontext - Sanity test : Fail errno=38 : Function not implemented	n/a	libc doesn't implement getcontext for ARM, so this result is expected	n/a
ioctl03	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	qemux86	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	/opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.0/M4 -RC2

total: 31

NEW Introduced: 1(mem02)

LTP: 0

NAB: 1

Fixed: 0

Duplicated: 26

pending: 3

not started: 0

Disappear without fixing patch: 1(msgctl11)

similarity: 26 (90.00%):

       mem02 fallocate01 fallocate02 fallocate03 getcontext01

LTP cases	status	owner	error msg	lsb	comment	bugzilla
mem02	n/a	n/a	mem02 0 TINFO : pm1=0x400c0008 pm2=0x400e8008 mem02 1 TFAIL : free did not dealloc memory	mem02 0 TINFO : pm1=0x400c0008 pm2=0x400e8008 mem02 1 TFAIL : free did not dealloc memory

1.0/M4 -RC1

total: 31

NEW Introduced: 1(msgctl11)

LTP: 0

NAB: 1

Fixed: 0

Duplicated: 26

pending: 3

not started: 0

Disappear without fixing patch: 1(tar)

similarity: 26 (90.00%):

       msgctl11 fallocate01 fallocate02 fallocate03 getcontext01

LTP cases	status	owner	error msg	lsb	comment	bugzilla
msgctl11	n/a	n/a	msgctl11 0 TWARN : Fork failure in first child of child group 56 msgctl11 0 TWARN : Fork failure in first child of child group 48 msgctl11 0 TWARN : Fork failure in first child of child group 43	n/a	n/a	n/a
fallocate01	pending	Kevin Tian	fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	This case is expected to return -EOPNOSUPP and then LTP will skip it. However on qemuarm/qemumips -EFBIG is returned earlier, and thus trigger this failure. Actually I don't understand why this will happen, and any offset/length returns same failure. fallocate from util-linux could trigger this failure too.	[bug678]
fallocate02	pending	Kevin Tian	fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	same as fallocate01	[bug678]
fallocate03	pending	Kevin Tian	fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	same as fallocate01	[bug678]
getcontext01	NAB	Kevin Tian	getcontext - Sanity test : Fail errno=38 : Function not implemented	n/a	libc doesn't implement getcontext for ARM, so this result is expected	n/a
ioctl03	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02_16	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	qemux86	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

1.0/M2

total: 37 (100% audited)

LTP: 0

NAB: 4

Fixed: 1

Duplicated: 29

pending: 3

not started: 0

similarity: 29 (78.00%):

       chdir01A fallocate01 fallocate02 fallocate03 getcontext01 splice02 utimensat01 hackbench01

LTP cases	status	owner	error msg	lsb	comment	bugzilla
utimensat01	Fixed	Kevin Tian	EXPECTED: EPERM RESULT: SUCCESS 1 1 FAILED test 78 ... (Failed tests: 46 47 48 49 50 51 52 53 54 55 56 57 58 61 62 63 64 65 66 67 68 69 70 73 74 75 76 77 78)	n/a	utimensat01 tried to verify all kinds of success and error conditions as defined in utimensat manual, for example, to get EPERM when the file is marked as append-only or immutable by chattr. However chattr has problem to change desired attributes as below: chattr: Inappropriate ioctl for device while reading flags on /tmp/ltp-XXXX36nW4a/utimensat_tests/utimensat.test_file it has been fixed in 2.6.37, and thus should be able to be further confirmed in 1.0-M3	n/a
fallocate01	pending	Kevin Tian	fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	This case is expected to return -EOPNOSUPP and then LTP will skip it. However on qemuarm/qemumips -EFBIG is returned earlier, and thus trigger this failure. Actually I don't understand why this will happen, and any offset/length returns same failure. fallocate from util-linux could trigger this failure too.	[bug678]
fallocate02	pending	Kevin Tian	fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	same as fallocate01	[bug678]
fallocate03	pending	Kevin Tian	fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large	n/a	same as fallocate01	[bug678]
chdir01A	NAB	Kevin Tian	symlink(object, symbolic) was succesful. mkdir(object, 0700) was successful chdir(2) returned successfully, but getcwd(3) indicated new current working directory location /var/volatile/tmp/ltp-XXXXK9vOzf/chdNQdk3G/object not equal to expected /tmp/ltp-XXXXK9vOzf/chdNQdk3G/object	n/a	this is caused by not using "-d tmpdir" to specify a new tmp directory. Then it means that /tmp is used which is however a symbol link to /var/volatile/tmp. getcwd() syscall retrieves the full path from the leaf to the /, which has not idea of the original symbol link, and thus break LTP's expectation	n/a
getcontext01	NAB	Kevin Tian	getcontext - Sanity test : Fail errno=38 : Function not implemented	n/a	libc doesn't implement getcontext for ARM, so this result is expected	n/a
hackbench01	NAB	Kevin Tian	the system simply hangs	n/a	it's not approriate to run this stress test in such an emulator, and this case has been commented when doing test on other platforms	n/a
splice02	NAB	Kevin Tian	splice failed - errno = 28 : No space left on device	n/a	this is because no "-d tmpdir" specified when running this test, while standard /dev/hda only have limited space	n/a
ioctl03	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02	qemux86	n/a	n/a	n/a	n/a	n/a
lchown02_16	qemux86	n/a	n/a	n/a	n/a	n/a
sysctl03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog01	qemux86	n/a	n/a	n/a	n/a	n/a
syslog02	qemux86	n/a	n/a	n/a	n/a	n/a
syslog03	qemux86	n/a	n/a	n/a	n/a	n/a
syslog04	qemux86	n/a	n/a	n/a	n/a	n/a
syslog05	qemux86	n/a	n/a	n/a	n/a	n/a
syslog07	qemux86	n/a	n/a	n/a	n/a	n/a
syslog08	qemux86	n/a	n/a	n/a	n/a	n/a
syslog09	qemux86	n/a	n/a	n/a	n/a	n/a
syslog10	qemux86	n/a	n/a	n/a	n/a	n/a
mtest06_2	qemux86	n/a	n/a	n/a	n/a	n/a
mmapstress06	qemux86	n/a	n/a	n/a	n/a	n/a
su01	qemux86	n/a	n/a	n/a	n/a	n/a
cron02	qemux86	n/a	n/a	n/a	n/a	n/a
cron_deny01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_allow01	qemux86	n/a	n/a	n/a	n/a	n/a
cron_dirs_checks01	qemux86	n/a	n/a	n/a	n/a	n/a
ld	qemux86	n/a	n/a	n/a	n/a	n/a
ldd	qemux86	n/a	n/a	n/a	n/a	n/a
file	qemux86	n/a	n/a	n/a	n/a	n/a
tar	qemux86	n/a	n/a	n/a	n/a	n/a
cron	qemux86	n/a	n/a	n/a	n/a	n/a
logrotate	qemux86	n/a	n/a	n/a	n/a	n/a
cpio	qemux86	n/a	n/a	n/a	n/a	n/a
unzip01	qemux86	n/a	n/a	n/a	n/a	n/a
gzip01	qemux86	n/a	n/a	n/a	n/a	n/a

@@ Line 1: / Line 1: @@
+==1.1/M3==
+'''total: 37 (100%)'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''owner''' || '''error msg''' || '''lsb''' || '''comment''' || '''bugzilla'''
+|-
+|| ld || LTP || || Assertion 1 ..................
+-)
+Assertion 2 ..................
+,4c1,3
+< gcc: error: x.obj: No such file or directory
+< gcc: error: y.obj: No such file or directory
+< gcc: fatal error: no input files
+< compilation terminated.
+---
+> gcc: x.obj: No such file or directory
+> gcc: y.obj: No such file or directory
+> gcc: No input files
+FAIL -  ld failed to give expected error msg
+|| n/a || This is a LTP bug || [[http://bugzilla.pokylinux.org/show_bug.cgi?id=1162 bug1162]]
+|-
+|| fallocate01 ||  || || fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large || n/a
+|| This case is expected to return -EOPNOSUPP and then LTP will skip it. However on qemuarm/qemumips -EFBIG is returned earlier, and thus trigger this failure.
+Actually I don't understand why this will happen, and any offset/length returns same failure. fallocate from util-linux could trigger this failure too.
+|| [[http://bugzilla.pokylinux.org/show_bug.cgi?id=678 bug678]]
+|-
+|| fallocate02 ||  || || fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large || n/a || same as fallocate01
+|| [[http://bugzilla.pokylinux.org/show_bug.cgi?id=678 bug678]]
+|-
+|| fallocate03 ||  || || fallocate(6, 0, 49152, 4096) failed: TEST_ERRNO=EFBIG(27): File too large || n/a || same as fallocate01
+|| [[http://bugzilla.pokylinux.org/show_bug.cgi?id=678 bug678]]
+|-
+|| getcontext01 || NAB || || getcontext - Sanity test :  Fail errno=38 : Function not implemented || n/a
+|| libc doesn't implement getcontext for ARM, so this result is expected
+|| n/a
+|-
+|| ioctl03 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| sysctl03 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| syslog01 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| syslog02 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| syslog03 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| syslog04 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| syslog05 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| syslog07 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| syslog08 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| syslog09 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| syslog10 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| mtest06_2 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| mmapstress06 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| su01 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| cron02 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| cron_deny01 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| cron_allow01 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| file || [[qemux86-ltp|qemux86]] || n/a || /opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found || n/a || n/a || n/a
+|-
+|| cron || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| logrotate || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| cpio || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| unzip01 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|| gzip01 || [[qemux86-ltp|qemux86]] || n/a || n/a || n/a || n/a || n/a
+|-
+|}
 ==1.1/M2==
 '''total: 29 (100%)'''

Qemuarm-ltp: Difference between revisions

Revision as of 05:16, 16 August 2011

Contents

1.1/M3

1.1/M2

1.1/M1

1.0/M4 -RC2

1.0/M4 -RC1

1.0/M2

Navigation menu

Page actions

Page actions

Personal tools

Navigation

Search

Tools