AutoBuilder Cluster Setup

AutoBuilder Cluster Setup

While the instructions below are targeted at setting up a new AutoBuilder cluster, they are equally valid for an single machine with combined controller and worker, except you probably won't use a NAS for storage. The controller portion requires only 2 GB of local disk space; the worker requires 2+ TB to hold all the build temp files and git repos. If build artifacts and a local sstate mirror are included, additional worker space is required.

As root

• Install base OS with minimal target
• Install the requirements from http://www.yoctoproject.org/docs/current/yocto-project-qs/yocto-project-qs.html
  • (Note: if you plan to build the poky-eclipse-neon plugin, openjdk-headless 1.8 is required.)
• If you plan to run the sanity tests (which is typical for an AB), the following additional packages need to be installed:
  • GitPython for Python2 and Python3
  • xsltproc
  • vncserver (whichever one is provided by the distro is fine)
• Add pokybuild user (uid=6000, or for older clusters 1006)
• Add pokybuild user to "users" group (gid 100) (if "users" group does not exist, create it)
• Following the instructions from https://wiki.yoctoproject.org/wiki/How_to_enable_KVM_for_Poky_qemu, give /dev/kvm permissions to the pokybuild user.
• If a "kvm" group does not exist, add it to /etc/group and ensure /dev/kvm gid is set to "kvm" and is mode 660. Add pokybuild user to the "kvm" group.
• git clone --single-branch http://git.yoctoproject.org/git/poky /root/poky (in /root for historical reasons, should change in the future)
• Install http://downloads.yoctoproject.org/releases/yocto/yocto-{latest_release}/toolchain/x86_64/poky-glibc-x86_64-core-image-sato-core2-64-toolchain-{relver}.sh to /opt/poky.
• Add startup scripts to create tap devs and start vncserver, in /etc/rc.local, /etc/init.d/boot.local, or as systemd unit files, which should perform the following:
  • cd /root/poky/scripts/; ./runqemu-gen-tapdevs 6000 100 32 /opt/poky/sysroots/x86_64-pokysdk-linux/
  • /bin/su - pokybuild -c "/usr/bin/vncserver"
• Disable or edit firewall rules to allow all connections to the tap devices. This allows sanity tests to connect to booted images.
• Install nfs-utils or nfs-common, add Domain to /etc/idmapd.conf, fstab entry, mount NAS under /srv/autobuilder.

As pokybuild

• Set up buildset-config, either:
  • Add ssh key to clone production yocto-autobuilder
  • git clone http://git.yoctoproject.org/git/yocto-autobuilder && cd yocto-autobuilder && git remote add prod git@git.yoctoproject.org:yocto-autobuilder-production && git fetch prod && git checkout -b yoctoio prod/yoctoio
• or:
  • edit one of the several examples included in repo e.g. cp -r buildset-config.controller buildset-config

• update config/autobuilder.conf and yocto-worker/buildbot.tac
• Start the worker
  • touch ~/yocto-autobuilder/.setupdone
  • . yocto-autobuilder-setup
  • ./yocto-start-autobuilder worker