Distribution Support: Difference between revisions

From Yocto Project
Jump to navigationJump to search
Line 1: Line 1:
==Distribution Support ==
==Distribution Support ==
===Distribution Support ===
===Distribution Support ===
This page is to maintain a list of distributions validated to work with Yocto Project. Everyone is welcome to add distribution support information into this page.


'''NOTE:  This list could be outdated'''. Please refer to the "[http://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#detailed-supported-distros Supported Linux Distributions]" section in the Yocto Project Reference Manual for the current list of supported Linux distributions.
The poky.conf file tracks all the distros supported by the Yocto Project. (http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta-poky/conf/distro/poky.conf) The supported, and subsequently sanity tested, distros are listed in the "SANITY_TEST_DISTROS" section in poky.conf. Each supported distro is deployed and used as a Yocto Autobuilder build worker. For more information on supported distros, please refer to the "Supported Linux Distributions" section in the Yocto Project Reference Manual.


{|border="1"
|| '''OS version''' || '''Host Arch''' || '''Status'''
|-
|| openSUSE 11.2 "Emerald" || -- || align="center" style="color:green;" | PASS
|-
||[[Distro/centos5.7|CentOS 5.7]] || 64bit || align="center" style="color:red;" | FAIL
|-
||[[Distro/centos6.2|CentOS 6.2]] || 32bit || align="center" style="color:green;" | PASS
|-
||[[Distro/ubuntu7.04|Ubuntu 7.04]] || 64bit || align="center" style="color:red;" | FAIL
|-
||[[Distro/ubuntu8.04|Ubuntu 8.04 LTS]] || 64bit || align="center" style="color:red;" | FAIL
|-
||[[Distro/ubuntu10.04_32b|Ubuntu10.04]]  || 32bit || align="center" style="color:green;" | PASS
|-
||[[Distro/ubuntu11.04_64b|Ubuntu11.04]]  || 64bit || align="center" style="color:green;" | PASS
|-
||[[Distro/fedora13_32b|Fedora 13]] || 32bit || align="center" style="color:green;" | PASS
|-
|| Fedora 14 || -- || align="center" style="color:green;" | PASS
|-
||[[Distro/fedora15_32b|Fedora 15]] || 32bit || align="center" style="color:green;" | PASS
|-
||[[Distro/fedora15_64b|Fedora 15]] || 64bit || align="center" style="color:green;" | PASS
|-
||[[Distro/fedora16_64b|Fedora 16]] || 64bit || align="center" style="color:green;" | PASS
|-
||[[Distro/fedora17_64b|Fedora 17]] || 64bit || align="center" style="color:green;" | PASS
|-
||[[Distro/fedora18_64b|Fedora 18]] || 64bit || align="center" style="color:green;" | PASS
|-
||[[Distro/opensuse11.3_32b|OpenSUSE 11.3]] || 32bit || align="center" style="color:green;" | PASS
|-
||[[Distro/opensuse11.4_64b|OpenSUSE 11.4]] || 64bit || align="center" style="color:red;" | FAIL
|-
||[[Distro/rhel6.2_64b|Red Hat Enterprise Linux Server 6.2]] || 64bit || align="center" style="color:green;" | PASS
|-
|[[Distro/DebianWheezy | Debian Wheezy]] || 64bit || align="center" style="color:red;" | FAIL
|}


<pre>Example of distro list in poky.conf:
SANITY_TESTED_DISTROS ?= " \
            poky-2.4 \n \
            poky-2.5 \n \
            ubuntu-15.04 \n \
            ubuntu-16.04 \n \
            ubuntu-16.10 \n \
            ubuntu-17.04 \n \
            fedora-26 \n \
            centos-7 \n \
            debian-8 \n \
            debian-9 \n \
            opensuse-42.1 \n \
            opensuse-42.2 \n \
            "
</pre>
Again, this is just an example, not meant to be a definitive reference. 
<br>
<br>


Revision as of 21:55, 31 July 2018

Distribution Support

Distribution Support

The poky.conf file tracks all the distros supported by the Yocto Project. (http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta-poky/conf/distro/poky.conf) The supported, and subsequently sanity tested, distros are listed in the "SANITY_TEST_DISTROS" section in poky.conf. Each supported distro is deployed and used as a Yocto Autobuilder build worker. For more information on supported distros, please refer to the "Supported Linux Distributions" section in the Yocto Project Reference Manual. 


Example of distro list in poky.conf:

SANITY_TESTED_DISTROS ?= " \
            poky-2.4 \n \
            poky-2.5 \n \
            ubuntu-15.04 \n \
            ubuntu-16.04 \n \
            ubuntu-16.10 \n \
            ubuntu-17.04 \n \
            fedora-26 \n \
            centos-7 \n \
            debian-8 \n \
            debian-9 \n \
            opensuse-42.1 \n \
            opensuse-42.2 \n \
            "

Again, this is just an example, not meant to be a definitive reference.

How to add a new entry or additional distro information

  • Check if there is already a distribution listed on this page
  • If there is no such distribution, you could add a new entry in above matrix for the distribution and add following information in the sub-page of this entry:
* Distribution (Fedora15/Ubuntu10.04/Opensuse11.4... etc):
* Arch (32/64):
* MACHINE (qemux86/qemuarm/qemuppc... etc):
* TARGET (core-image-sato/core-image-sato-sdk... etc):
* Commit/Release (7eea637db0.../master, 1.0.1 release):
* Validated by/DATE (user@email.com - 2011-09-14):
* Bug ID: (If the status of your testing is failure, pls. help to file a bug in our bugzilla, http://bugzilla.pokylinux.org)
  • If there is already a distribution in above matrix, it's better for you to check if your test result is consistent with the old result in matrix. You could update the "Status" field and add additional information with above format into sub-page of the distribution.


Distro Testing

Distro test coverage

Distro Testing is intended to catch bugs that are distribution specific using the yocto-autobuilder. The tests are all run on identical hardware and with all OS-es updated. The distributions used will be Fedora, Ubuntu, CentOS, OpenSuse with their latest update.
This is the list of the builds that are performed on Distro testing:

Build-set Images Built Target machine
nightly-world world qemux86
buildtools buildtools-tarball qemux86-64
nightly-arm core-image-sato qemuarm
core-image-sato-dev
core-image-sato-sdk
core-image-minimal
core-image-minimal-dev
nightly-multilib lib32-core-image-minimal qemux86-64
lib32-core-image-sato
lib64-core-image-minimal qemux86
lib64-core-image-sato
nightly-qa-systemd core-image-sato qemux86-64
nightly-x86 core-image-sato qemux86
core-image-sato-dev
core-image-sato-sdk
core-image-minimal
core-image-minimal-dev
core-image-sato qemux86-64
core-image-sato-dev
core-image-sato-sdk
core-image-minimal
core-image-minimal-dev
nightly-x86-64 core-image-sato qemux86
core-image-sato-dev
core-image-sato-sdk
core-image-minimal
core-image-minimal-dev
core-image-sato qemux86-64
core-image-sato-dev
core-image-sato-sdk
core-image-minimal
core-image-minimal-dev


Retrieved from "https://wiki.yoctoproject.org/wiki/index.php?title=Distribution_Support&oldid=40894"