LSB Result: Difference between revisions
Xiaofeng Yan (talk | contribs) |
Xiaofeng Yan (talk | contribs) |
||
Line 140: | Line 140: | ||
*** Xpdf | *** Xpdf | ||
**** pdftotext | **** pdftotext | ||
It was caused by the difference of compilation tool between LSB Test Suite and mpc8315e. | |||
In fact, instruction "fsqrt" doesn't exist on e300core serial and CPU of mpc8315e belongs to e300core type. So this problem can't be solved for mpc8315e | |||
* OLVER Core Tests: | * OLVER Core Tests: | ||
** OLVER Core Tests can't be finished on mpc8315e-rdb | ** OLVER Core Tests can't be finished on mpc8315e-rdb |
Revision as of 07:20, 3 June 2011
Introduction
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)
LSB Test Suite support the following architecture.
- i486
- ia64
- ppc32
- ppc64
- s390
- s390x
- x86_64
So LSB don't support arm and mips at present time and it will add test suite to support arm and mips possibly in the future.
Test Environment
- Image: core-image-lsb-qt3
- Platform: x86-32(emenlow), x86-64(jasperforest), ppc(mpc8315e-rdb)
result
Below table shows the result of LSB Test on different platforms.
Test | Version | X86-32(emenlow) | X86-64(jasperforest) | ppc(mpc8315e-rdb) | |
Command Check | v 4.1.0-1 | Success | Success | ||
Library Check | v 4.1.0-1 | Warning | Warning | ||
Alsa-T2C Tests | v 4.1.0-1 | Success | Success | ||
Core Tests | v 4.1.0-1 | Failures: 12 | Failures: 66 | ||
Core-T2C Tests | v 4.1.0-1 | Success | Success | ||
Cpp-T2C Tests | v 4.1.0-1 | Success | Success | ||
Desktop Tests | v 4.1.0-2 | Failures: 2 | Failures: 24 | ||
Desktop-T2C Tests | v 4.1.0-1 | Failures: 2 | Failures: 17 | ||
Libstdc++ Tests | v 4.1.0-13 | Success | Failures: 2 | ||
OLVER Core Tests | v 4.1.0-1 | Failures: 10 | Block | ||
Perl Tests | v 4.1.0-1 | Failures: 1 | Failures: 1 | ||
Printing Tests | v 4.1.0-1 | Failures: 1 | Failures: 3 | ||
Python Runtime Tests | v 4.1.1-2 | Success | Success | ||
Qt3-Azov Tests | v 4.1.0-1 | Success | Failures: 106 | ||
Qt4-Azov Tests | v 4.1.0-1 | Failures: 5 | Failures: 46 | ||
Xml2-Azov Tests | v 4.1.0-1 | Success | Success | ||
Xts5 Tests | v 5.1.5-38 | Failures: 1 | Failures: 2 | ||
Apache Tests | v 2.2.14-3 | Success | |||
Expect Tests | v 5.43.0-11 | Success | Success | ||
Groff Tests | v 1.20.1-5 | Success | Success | ||
Raptor Tests | v 1.4.19-3 | Success | Success | ||
Rsync Tests | v 3.0.6-3 | Success | Success | ||
Samba Tests | v 3.4.3-5 | Success | Success | ||
Tcl Tests | v 8.5.7-6 | Success | Success | ||
Xpdf Tests | v 1.01-10 | Success | Failures: 1 |
Analysis of result
Below table shows the failed test cases.
- Total failures: The number of total failures after running test. It includes known problems and real failures which should be fixed.
- Known problem: Known problem means it is a bug of LSB itself and we can find trace these bugs on http://bugs.linuxbase.org. On link page we give a summary of known problems.
- Failures(need to fix) : Real failures we should fix them
x86-32 (emenlw)
We have 4 failures to fix.
- Core tests: 2
- Xts5 Tests:1
Test | Total failures | Known problem | Failures(need to fix) | Note | |
Core Tests | 12 | 10 | 2 | ||
Desktop Tests | 2 | 2 | |||
Desktop-T2C Tests | 2 | 2 | |||
OLVER Core Tests | 10 | 10 | |||
Perl Tests | 1 | 1 | |||
Printing Tests | 1 | 1 | |||
Qt4-Azov Tests | 5 | 5 | |||
Xts5 Tests | 1 | 1 |
ppc(mpc8315e)
We have the following failures(including "unresolved" and "failed") to fix.
Test | Total failures | Known problem | Failures(need to fix) | Note | |
Core Tests | 66 | 10 | 47(unresolved), 8(failed), 1(unreported) | ||
Desktop Tests | 24 | 20 | 2(unresolved), 1(failed), 1 unreported | ||
Desktop-T2C Tests | 17 | 2 | 15(unresolved) | ||
Libstdc++ Tests | 2 | 2 | |||
OLVER Core Tests | Blocked | ||||
Perl Tests | 1 | 1 | |||
Printing Tests | 3 | 1 | 1(unresolved), 1(failure), 1(unreported) | ||
Qt3-Azov | 106 | 106(unresolved) | |||
Qt4-Azov | 46 | 1 | 45(unresolved) | ||
Xts5 Tests | 2 | 2 | |||
Xpdf Tests | 1 | 1 |
- Left memory:
- There are only 20M left when system start up without running any other program except for command "free -m".
- Illegal instruction
- 65 SIGILL error
- Core Tests
- /tset/ANSI.os/math/... : SIGILL cause 47 unresolved failures.
- /tset/LSB.os/libm/fpeInvalid/T.fpeInvalid (1st--2nd)
- Desktop-t2c Tests
- /glib-t2c/tests/glib_random/glib_random (9th--23rd)
- Xpdf
- pdftotext
- Core Tests
- 65 SIGILL error
It was caused by the difference of compilation tool between LSB Test Suite and mpc8315e. In fact, instruction "fsqrt" doesn't exist on e300core serial and CPU of mpc8315e belongs to e300core type. So this problem can't be solved for mpc8315e
- OLVER Core Tests:
- OLVER Core Tests can't be finished on mpc8315e-rdb
- We think the reason which make test blocked is the low memory(128M on mpc8315e). Because we re-run the test case which is blocked during OLVER core tests and it can pass successfully. That is to say, if we run the single test case, it will be passed. But we run all OLVER core tests and the whole tests will be blocked. We have ever run OLVER Core Tests for nearly 50 hours and it can't finish.
- lsb-test-olver-core may require about 512Mb of system memory (with an X server and a contemporary desktop running), as well as 2Gb of free disk space to complete a test run. The reference linkage: http://ldn.linuxfoundation.org/lsb/preparing-lsb-distribution-testing
- Qt3-Azov Tests
- Out of memory error cause all of the failures, the following information arise on screen when running Qt3 test suite
Killed process 22453 (Xvfb) total-vm:84064kB, anon-rss:73720kB, file-rss:8kB run-parts invoked oom-killer: gfp_mask=0xd0, order=1, oom_adj=0, oom_score_adj=0 Call Trace: [c0cadc90] [c0009f3c] show_stack+0x108/0x1c4 (unreliable) [c0cadce0] [c0431098] dump_stack+0x2c/0x44 [c0cadcf0] [c00a1880] dump_header.clone.14+0x70/0x184 [c0cadd30] [c00a1b80] oom_kill_process.clone.16+0x94/0x294 [c0cadd60] [c00a222c] out_of_memory+0x270/0x33c [c0caddb0] [c00a6628] __alloc_pages_nodemask+0x624/0x65c [c0cade50] [c00a6694] __get_free_pages+0x34/0x6c [c0cade60] [c00269f8] copy_process+0xe4/0xd84 [c0cadec0] [c0027764] do_fork+0x80/0x39c [c0cadf20] [c0009cb4] sys_vfork+0x68/0x80 [c0cadf40] [c0011d0c] ret_from_syscall+0x0/0x38 --- Exception: c00 at 0xfecc358 LR = 0x10084518
- I think this should be limited memory problem
- Libstdc++ Tests
- /26_numerics/complex/13450.cc
- This test case check whether data type "long double" can't be supported or not on ppc. Mp8315e deviates from what the test expects. It is Known problem.
- /27_io/basic_stringbuf/overflow/wchar_t/1.cc
- No enough memory for this test case. It can pass on qemuppc with 256M and fail with 128M.
- /26_numerics/complex/13450.cc
- Xpdf Tests:
- SIGILL cause Xpdf failed.
Failures tracker
We should fix the following problems. We also filed bugs for them and try to fix them.
Tests | Sub Tests | Test Number | Arch | Bug ID of yocto | Proposal suggestion | |
Core Tests | /tset/LSB.fhs/var/lib/lib-tc | 1 | x86-32, x86-64, ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 | http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo | |
Core Tests | /tset/LSB.fhs/var/lib-misc/lib-misc-tc | 1 | x86-32, x86-64, ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 | http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo | |
Core Tests | /tset/ANSI.os/maths/* | 47 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1114 | No instruction "fsqrt" for e300core | |
Core Tests | /tset/LSB.os/libm/fpeInvalid/T.fpeInvalid | 2 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1114 | No instruction "fsqrt" for e300core | |
Core Tests | /tset/LI18NUX2K.L1/base/iswcntrl/T.iswcntrl 1th | 1 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1115 | ||
Core Tests | /tset/LI18NUX2K.L1/base/iswdigit/T.iswdigit 1th | 1 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1115 | ||
Core Tests | /tset/LI18NUX2K.L1/base/iswlower/T.iswlower 1th | 1 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1115 | ||
Core Tests | /tset/LI18NUX2K.L1/base/iswupper/T.iswupper 1th | 1 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1115 | ||
Core Tests | /tset/LI18NUX2K.L1/base/iswxdigit/T.iswxdigit 1th | 1 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1115 | ||
Desktop | /tests/functions/GHashTable/GHashTable 5th | 1 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1116 | ||
Desktop | /tests/functions/Param_Value/Param_Value 20th (unresolved) | 1 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1118 | http://bugs.linuxbase.org/show_bug.cgi?id=2849 | |
Desktop | /tests/functions/SpawnProc/SpawnProc 2 (unresolved) | 1 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1117 | ||
Desktop-t2c | /glib-t2c/tests/glib_threads/glib_threads 36th | 1 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1119 | http://bugs.linuxbase.org/show_bug.cgi?id=3042 | |
Desktop-t2c | /glib-t2c/tests/glib_random/glib_random 9th-23th | 14 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1114 | No instruction "fsqrt" for e300core | |
Desktop-t2c | /gobject-t2c/tests/gobject_gtype_instance/gobject_gtype_instance 39th | 1 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1120 | http://bugs.linuxbase.org/show_bug.cgi?id=3184 | |
Libstdc++ Tests | /27_io/basic_stringbuf/overflow/wchar_t/1.cc 1th | 1 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1121 | No enough memory for this test case. It can pass on qemuppc with 256M and fail with 128M | |
Libstdc++ Tests | /26_numerics/complex/13450.cc 1th | 1 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1122 | http://bugs.linuxbase.org/show_bug.cgi?id=2447 | |
Printing Tests | /convenience/cupsConvenience 37th (unresolved) | 1 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1123 | ||
Xts5 Tests | /tset/Xlib10/kllclnt/Test 2th | 1 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1124 | ||
Xts5 Tests | /tset/Xopen/strtkysym/Test | 7 | x86-32, ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 | http://git.pokylinux.org/cgit.cgi/poky-contrib/commit/?h=jingdonglu/distro&id=c6dde065b9fafabeda6904c23118a11e99d23e08 | |
Perl Tests | ../ext/IPC/SysV/t/ipcsysv.t | 294 | x86-32, ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1078 | Maybe a LSB bug(we have filed it as a bug on LSB bugzilla | |
Xpdf Tests | /opt/lsb/appbat/bin/pdftotext test1.pdf | 1 | ppc | http://bugzilla.pokylinux.org/show_bug.cgi?id=1114 | No instruction "fsqrt" for e300core |
Known problems tracker
See details on Known problems tracker