Qemux86-ltp: Difference between revisions

From Yocto Project
Jump to navigationJump to search
 
(18 intermediate revisions by 2 users not shown)
Line 1: Line 1:
==1.0/M2==
==1.0/M4 - RC2==
total: 34
'''total: 27'''
*NEW Intro: 2 (mtest01, mtest01w)
 
*LTP: 2
 
*NAB: 23
 
*Fixed: 0
 
*Disappear in this build without fixing: 0
 
New introduced failed cases:
{|border="1"
|| '''LTP cases'''|| '''status''' || '''owner''' || '''error msg''' || '''lsb''' || '''comment''' || '''bugzilla'''
|-
|| mtest01|| n/a || n/a || mtest01    0  TINFO  :  Total memory used needed to reach maxpercent = 409254 kbytes mtest01    0  TINFO  :  Total memory already used on system = 429332 kbytes mtest01    1  TFAIL  :  More memory than the maximum amount you specified is already being use || N/T || n/a || n/a
|-
|| mtest01w|| n/a || n/a || mtest01    0  TINFO  :  Total memory used needed to reach maxpercent = 409254 kbytes mtest01    0  TINFO  :  Total memory already used on system = 429332 kbytes mtest01    1  TFAIL  :  More memory than the maximum amount you specified is already being use || N/T || n/a || n/a
|-
|}


audit: 23(56.00%)
==1.0/M4 - RC1==
'''total: 25'''
*NEW Intro: 0


*LTP: 3
*LTP: 2


*NAB: 20
*NAB: 23


*Fixed: 0
*Fixed: 0


pending: 4
*Disappear in this build without fixing: 2(tar, open08)
 
{|border="1"
|| '''LTP cases'''|| '''status''' || '''owner''' || '''error msg''' || '''lsb''' || '''comment''' || '''bugzilla'''
|-
|| lchown02 || LTP || Kevin Tian || Fail to modify tfile_1 ownership(s) || N/T || n/a || n/a
|-
|| lchown02_16 || LTP || Kevin Tian || Fail to modify tfile_1 ownership(s) || N/T || n/a || n/a
|-
|| cron || NAB || Kevin Tian || cron_tests.sh: line 102: crontab: not found; tail: cannot open `/var/log/messages' for reading: No such file or directory || N/T || in yocto crontab is recorded in /var/log/sysctl
|| n/a
|-
|| ioctl03 || NAB || Kevin Tian || Error Opening /dev/net/tun: No such file or directory || N/T || tun is an optional kernel feature, not included in the kernel config for current profile
|| n/a
|-
|| unzip01 || NAB || Kevin Tian || unzip output differs from expected output. Details || '''PASS'''
|| busybox has a different output format
|| n/a
|-
|| syslog01 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: *.crit: not found; /var/log/maillog no such log file || N/T || n/a || n/a
|-
|| syslog02 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: mail.emerg: not found; /var/log/maillog no such log file || N/T || n/a || n/a
|-
|| syslog03 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: daemon.info: not found; /var/log/messages no such log file || N/T || n/a || n/a
|-
|| syslog04 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.info: not found; /var/log/messages no such log file || N/T || n/a || n/a
|-
|| syslog05 || NAB || Kevin Tian  || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.info: not found; /var/log/messages no such log file || N/T || n/a || n/a
|-
|| syslog07 || NAB || Kevin Tian  || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.debug: not found; grep: /var/log/messages: No such file or directory || N/T || n/a || n/a
|-
|| syslog08 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.info: not found; /var/log/messages no such log file || N/T || n/a || n/a
|-
|| syslog09 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.debug: not found; /var/log/messages no such log file || N/T || n/a || n/a
|-
|| syslog10 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.debug: not found; /var/log/messages no such log file || N/T || n/a || n/a
|-
|| gzip01 || NAB || Kevin Tian || gzip: invalid option -- 'r' || '''PASS'''
|| busybox doesn't support "-r" option
|| n/a
|-
|| cpio || NAB || Kevin Tian || cpio: invalid option -- 'o' || '''PASS'''
|| busybox doesn't support "-o" option
|| n/a
|-
|| logrotate || NAB || Kevin Tian || INIT: command logrotate not found || N/T || n/a || n/a
|-
|| file || NAB || Kevin Tian || file_test.sh: line 576: rpmbuild: not found /usr/src/rpm/SRPMS/cprog-0.0.7-3.src.rpm: cannot open `/usr/src/rpm/SRPMS/cprog-0.0.7-3.src.rpm' (No such file or directory) || N/T || two reasons for LSB failure:
 
a) LTP's own problem - there's no check whether /usr/src/rpm/SRPM exists or not, which contributes to "No such file or directory" error;
 
b) rpm5 has different output as rpm.org. "RPM v3.0 bin" is generated while "RPM v3.0 src" is expected
|| n/a
|-
|| mtest06_2 || NAB || Kevin Tian || main(): mmap(): Cannot allocate memory || N/T || '''PASS''' by enlarging memory size to 1278M, because this test case requires 1G free memory
|| n/a
|-
|| cron_deny01 || NAB || Kevin Tian || Could not add test user c01_user to system || N/T || SDK profile doesn't contain cron;
 
LSB profile has multiple issues:
 
1) lsb's own error (use /var/spool/cron/deny while /etc/cron.deny is expected by cronie)
 
2) PATH contains ending colon which results "cron_deny01 not found" error
 
3) cronie itself lacks of necessary files and permissions to support non-root user using crontab 
|| [[http://bugzilla.yoctoproject.org/show_bug.cgi?id=672 bug672]]
 
[[http://bugzilla.pokylinux.org/show_bug.cgi?id=673 bug673]]
 
|-
|| cron_allow01 || NAB || Kevin Tian || cron_allow01: line 200: useradd: not found || N/T || same reason as cron_deny01
|| [[http://bugzilla.yoctoproject.org/show_bug.cgi?id=672 bug672]]
 
[[http://bugzilla.pokylinux.org/show_bug.cgi?id=673 bug673]]
 
|-
|| cron02 || NAB || Kevin Tian || cron02: line 79: useradd: not found;Could not add test user c01_user to system || N/T || same reason as cron_deny01
 
and one more specific reason. LTP cron test assumes vixie-cron behavior, which allows any user to use crontab if there's no /etc/cron.deny and /etc/cron.allow. cronie however enforces the reverse, that only superuser is allowed under that condition. LTP test case needs to be enhanced to explicitly set cron.allow before the test.
 
|| report to LTP
 
[[http://bugzilla.yoctoproject.org/show_bug.cgi?id=672 bug672]]
 
[[http://bugzilla.pokylinux.org/show_bug.cgi?id=673 bug673]]
 
|-
|| cron_dirs_checks01 || NAB || Kevin Tian || FAIL: /etc/cron.d. Could not obtain directory status || N/T
|| lack of necessary directories, like cron.monthly, ...
 
but there's also one known issue. this case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. So this case is known to fail in the future too
|| [[http://bugzilla.yoctoproject.org/show_bug.cgi?id=672 bug672]]
 
[[http://bugzilla.pokylinux.org/show_bug.cgi?id=673 bug673]]
 
|-
|| su01 || NAB || Kevin Tian || su01: line 175: userdel: not found || N/T || su01_s1 uses '/usr/bin/expect' as the interpreter, which I don't think needs to add into yocto. so this will remain as a failure
 
there's one issue though, that /bin/sh is still linked to busybox even when bash is included in LSB profile, which makes the error message inaccurate. with bash the error becomes "/usr/bin/expect: bad interpreter"
 
|| [[http://bugzilla.pokylinux.org/show_bug.cgi?id=674 bug674]]
|-
|| sysctl03 || NAB || Kevin Tian ||  TWARN  :  this test's results are based on potentially undocumented behavior in the kernel. read the NOTE in the source file for more details ||  N/T || TWARN is not a failure, especially in this case sysctl03 throws out the warning when the kernel version >2.6.32.
 
since we have 2.6.37, this is expected
|| n/a
|-
|}
 
==1.0/M2==
'''total: 34 (100% audited)'''
 
*LTP: 2
 
*NAB: 26
 
*Fixed: 6
 
pending: 0


not started: 7
not started: 0


{|border="1"  
{|border="1"  
Line 21: Line 161:
|| lchown02_16 || LTP || Kevin Tian || Fail to modify tfile_1 ownership(s) || Fail to modify tfile_1 ownership(s) || n/a || n/a
|| lchown02_16 || LTP || Kevin Tian || Fail to modify tfile_1 ownership(s) || Fail to modify tfile_1 ownership(s) || n/a || n/a
|-
|-
|| cron || LTP || Kevin Tian || cron_tests.sh: line 102: crontab: not found; tail: cannot open `/var/log/messages' for reading: No such file or directory || crontab activity not recorded in /var/log/messages. || lsb error is same as native || n/a
|| ld || Fixed || Kevin Tian || ld01: line 149: file: not found; FAIL - ld failed to build a shared object || ld01: line 75: gcc: not found
|| '''PASS''' after copying 'file' utility to SDK profile
 
but I'm not sure whether we want to pull this into SDK profile.
|| [[http://bugzilla.pokylinux.org/show_bug.cgi?id=676 bug676]]
|-
|-
|| ioctl03 || NAB || Kevin Tian || Error Opening /dev/net/tun: No such file or directory || Error Opening /dev/net/tun: No such file or directory || tun is an optional kernel feature, not included in the kernel config for current profile || n/a
|| ldd || Fixed || Kevin Tian || ldd01: line 99: file: not found; ldd01: line 100: ldd: not found || dd01: line 99: gcc: not found
|| '''PASS''' after copying 'ldd' utility to SDK profile
 
ldd package is actually generated already. this one is good to be included into SDK profile as a development utility
|| [[http://bugzilla.pokylinux.org/show_bug.cgi?id=676 bug676]]
|-
|-
|| unzip01 || NAB || Kevin Tian || unzip output differs from expected output. Details || PASS || busybox has a different output format || n/a
|| chroot01 || Fixed || Kevin Tian || Received unexpected error - 13 : Permission denied || '''PASS'''
|| this case expects an -EPERM (if /var is set with 755 permission bits), but not sure why SDK image in M2 has the permission bits of /var as 0700 which results -EACCES returned. latest master has no this issue. will monitor in later tests.
|| n/a
|-
|-
|| syslog01 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: *.crit: not found; /var/log/maillog no such log file || PASS || n/a || n/a
|| mtest06 || Fixed || Kevin Tian || caught unexpected signal - 11 --- exiting || same error in lsb
|| '''PASS''' in 01/11 nightly test
 
will recheck in next milestone test
|| n/a
|-
|-
|| syslog02 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: mail.emerg: not found; /var/log/maillog no such log file || PASS || n/a || n/a
|| at_deny01 || Fixed || Kevin Tian || TCONF  :  at command not found on system || at_deny01: line 194: /etc/init.d/atd: not found  
|| similar reason as cron_deny01, that we don't have a right environment for normal user to use at.
|| [[http://bugzilla.pokylinux.org/show_bug.cgi?id=675 bug675]]
 
bug5
|-
|-
|| syslog03 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: daemon.info: not found; /var/log/messages no such log file || PASS || n/a || n/a
|| at_allow01 || Fixed || Kevin Tian || TCONF  :  at command not found on system || at_allow01: line 185: /etc/init.d/atd: not found  
|| similar reason as cron_deny01, that we don't have a right environment for normal user to use at.
|| [[http://bugzilla.pokylinux.org/show_bug.cgi?id=675 bug675]]
 
bug5
|-
|-
|| syslog04 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.info: not found; /var/log/messages no such log file || PASS || n/a || n/a
|| cron || NAB || Kevin Tian || cron_tests.sh: line 102: crontab: not found; tail: cannot open `/var/log/messages' for reading: No such file or directory || crontab activity not recorded in /var/log/messages.
|| in yocto crontab is recorded in /var/log/sysctl
|| n/a
|-
|-
|| syslog05 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.info: not found; /var/log/messages no such log file || PASS || n/a || n/a
|| ioctl03 || NAB || Kevin Tian || Error Opening /dev/net/tun: No such file or directory || Error Opening /dev/net/tun: No such file or directory
|| tun is an optional kernel feature, not included in the kernel config for current profile
|| n/a
|-
|-
|| syslog07 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.debug: not found; grep: /var/log/messages: No such file or directory || PASS || n/a || n/a
|| unzip01 || NAB || Kevin Tian || unzip output differs from expected output. Details || '''PASS'''
|| busybox has a different output format
|| n/a
|-
|-
|| syslog08 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.info: not found; /var/log/messages no such log file || PASS || n/a || n/a
|| syslog01 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: *.crit: not found; /var/log/maillog no such log file || '''PASS''' || n/a || n/a
|-
|-
|| syslog09 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.debug: not found; /var/log/messages no such log file || PASS || n/a || n/a
|| syslog02 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: mail.emerg: not found; /var/log/maillog no such log file || '''PASS''' || n/a || n/a
|-
|-
|| syslog10 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.debug: not found; /var/log/messages no such log file || PASS || n/a || n/a
|| syslog03 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: daemon.info: not found; /var/log/messages no such log file || '''PASS''' || n/a || n/a
|-
|-
|| tar || NAB || Kevin Tian || tar_tests.sh: line 172: file: not found; tar: zcvf option failed to create a compressed tar file || PASS || n/a || n/a
|| syslog04 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.info: not found; /var/log/messages no such log file || '''PASS''' || n/a || n/a
|-
|-
|| gzip01 || NAB || Kevin Tian || gzip: invalid option -- 'r' || PASS || busybox doesn't support "-r" option || n/a
|| syslog05 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.info: not found; /var/log/messages no such log file || '''PASS''' || n/a || n/a
|-
|-
|| cpio || NAB || Kevin Tian || cpio: invalid option -- 'o' || PASS || busybox doesn't support "-o" option || n/a
|| syslog07 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.debug: not found; grep: /var/log/messages: No such file or directory || '''PASS''' || n/a || n/a
|-
|-
|| logrotate || NAB || Kevin Tian || INIT: command logrotate not found || PASS || n/a || n/a
|| syslog08 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.info: not found; /var/log/messages no such log file || '''PASS''' || n/a || n/a
|-
|-
|| ld || NAB || Kevin Tian || ld01: line 149: file: not found; FAIL - ld failed to build a shared object || ld01: line 75: gcc: not found || PASS after copying 'file' utility to SDK profile || n/a
|| syslog09 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.debug: not found; /var/log/messages no such log file || '''PASS''' || n/a || n/a
|-
|-
|| ldd || NAB || Kevin Tian || ldd01: line 99: file: not found; ldd01: line 100: ldd: not found || dd01: line 99: gcc: not found || PASS after copying 'ldd' utility to SDK profile || n/a
|| syslog10 || NAB || Kevin Tian || /etc/init.d/syslog: /etc/syslog.conf: line 2: user.debug: not found; /var/log/messages no such log file || '''PASS''' || n/a || n/a
|-
|-
|| file || NAB || Kevin Tian || file_test.sh: line 162: file: not found || home/root/ltp/ltp/tmp/cprog: cannot open `/home/root/ltp/ltp/tmp/cprog' (No such file or directory); file09      9  TBROK  : rpm command broke. Reason:warning: Could not canonicalize hostname: qemux86; error: Could not open /usr/src/rpm/SRPMS/cprog-0.0.7-3.src.rpm: No such file or directory || two reasons for LSB failure: a) LTP's own problem - there's no check whether /usr/src/rpm/SRPM exists or not, which contributes to "No such file or directory" error; b) rpm5 has different output as rpm.org. "RPM v3.0 bin" is generated while "RPM v3.0 src" is expected || pending: to send a fix to LTP upstream
|| tar || NAB || Kevin Tian || tar_tests.sh: line 172: file: not found; tar: zcvf option failed to create a compressed tar file || '''PASS'''
|| busybox supports less options than standard tar
|| n/a
|-
|-
|| chroot01 || NAB || Kevin Tian || Received unexpected error - 13 : Permission denied || PASS || this case expects an -EPERM (if /var is set with 755 permission bits), but not sure why SDK image in M2 has the permission bits of /var as 0700 which results -EACCES returned. latest master has no this issue. will monitor in later tests. || n/a
|| gzip01 || NAB || Kevin Tian || gzip: invalid option -- 'r' || '''PASS'''
|| busybox doesn't support "-r" option
|| n/a
|-
|-
|| mmapstress06 || NAB || Kevin Tian || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || same in lsb || PASS with "-m 512". not enough free memory. at least 128M is required.  || n/a
|| cpio || NAB || Kevin Tian || cpio: invalid option -- 'o' || '''PASS'''
|| busybox doesn't support "-o" option
|| n/a
|-
|-
|| su01 || pending || Kevin Tian || su01: line 175: userdel: not found || sh: /home/root/ltp/ltp/testcases/bin/su01_s1: not found || depends on 'expect' || n/a
|| logrotate || NAB || Kevin Tian || INIT: command logrotate not found || '''PASS''' || n/a || n/a
|-
|-
|| at_deny01 || pending || Kevin Tian || TCONF :  at command not found on system || at_deny01: line 194: /etc/init.d/atd: not found || n/a || n/a
|| file || NAB || Kevin Tian || file_test.sh: line 162: file: not found || home/root/ltp/ltp/tmp/cprog: cannot open `/home/root/ltp/ltp/tmp/cprog' (No such file or directory); file09      9  TBROK :  rpm command broke. Reason:warning: Could not canonicalize hostname: qemux86; error: Could not open /usr/src/rpm/SRPMS/cprog-0.0.7-3.src.rpm: No such file or directory
|| two reasons for LSB failure:
 
a) LTP's own problem - there's no check whether /usr/src/rpm/SRPM exists or not, which contributes to "No such file or directory" error;
 
b) rpm5 has different output as rpm.org. "RPM v3.0 bin" is generated while "RPM v3.0 src" is expected
|| n/a
|-
|-
|| at_allow01 || pending || Kevin Tian || TCONF  : at command not found on system || at_allow01: line 185: /etc/init.d/atd: not found || n/a || n/a
|| open08 || NAB || Kevin Tian || unexpected error - 13 : Permission denied - expected 21 || '''PASS''' || n/a || n/a
|-
|-
|| sysctl03 || pending || Kevin Tian || TWARN  : this test's results are based on potentially undocumented behavior in the kernel. read the NOTE in the source file for more details || TWARN  :  this test's results are based on potentially undocumented behavior in the kernel. read the NOTE in the source file for more details || n/a || n/a
|| mmapstress06 || NAB || Kevin Tian || mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages || same in lsb
|| '''PASS''' with "-m 512". not enough free memory. at least 128M is required.
|| n/a
|-
|-
|| open08 || not started || Kevin Tian || unexpected error - 13 : Permission denied - expected 21 || PASS || n/a || n/a
|| mtest06_2 || NAB || Kevin Tian || main(): mmap(): Cannot allocate memory || same error in lsb  
|-
|| '''PASS''' by enlarging memory size to 1278M, because this test case requires 1G free memory
|| mtest06 || not started || Kevin Tian  || caught unexpected signal - 11 --- exiting || same error in lsb || n/a || n/a
|| n/a
|-
|| mtest06_2 || not started || Kevin Tian || main(): mmap(): Cannot allocate memory || same error in lsb || n/a || n/a
|-
|| cron02 || not started || Kevin Tian || cron02: line 79: useradd: not found;Could not add test user c01_user to system || /bin/sh: cron_pos_tests.sh: not found || n/a || n/a
|-
|-
|| cron_deny01 || NAB || Kevin Tian || Could not add test user c01_user to system || /bin/sh: cron_deny01: not found  
|| cron_deny01 || NAB || Kevin Tian || Could not add test user c01_user to system || /bin/sh: cron_deny01: not found  
Line 84: Line 262:
LSB profile has multiple issues:
LSB profile has multiple issues:


1) lsb's own error (use /var/spool/cron/deny while /etc/cron.deny is expected)
1) lsb's own error (use /var/spool/cron/deny while /etc/cron.deny is expected by cronie)


2) PATH contains ending colon which results "cron_deny01 not found" error
2) PATH contains ending colon which results "cron_deny01 not found" error


3) cronie itself lacks of necessary files and permissions to support non-root user using crontab   
3) cronie itself lacks of necessary files and permissions to support non-root user using crontab   
|| n/a
|| [[http://bugzilla.yoctoproject.org/show_bug.cgi?id=672 bug672]]
 
[[http://bugzilla.pokylinux.org/show_bug.cgi?id=673 bug673]]
 
|-
|| cron_allow01 || NAB || Kevin Tian || cron_allow01: line 200: useradd: not found || /bin/sh: cron_allow01: not found || same reason as cron_deny01
|| [[http://bugzilla.yoctoproject.org/show_bug.cgi?id=672 bug672]]
 
[[http://bugzilla.pokylinux.org/show_bug.cgi?id=673 bug673]]
 
|-
|| cron02 || NAB || Kevin Tian || cron02: line 79: useradd: not found;Could not add test user c01_user to system || /bin/sh: cron_pos_tests.sh: not found
|| same reason as cron_deny01
 
and one more specific reason. LTP cron test assumes vixie-cron behavior, which allows any user to use crontab if there's no /etc/cron.deny and /etc/cron.allow. cronie however enforces the reverse, that only superuser is allowed under that condition. LTP test case needs to be enhanced to explicitly set cron.allow before the test.
 
|| report to LTP
 
[[http://bugzilla.yoctoproject.org/show_bug.cgi?id=672 bug672]]
 
[[http://bugzilla.pokylinux.org/show_bug.cgi?id=673 bug673]]
 
|-
|| cron_dirs_checks01 || NAB || Kevin Tian || FAIL: /etc/cron.d. Could not obtain directory status || FAIL: /etc/cron.d. Could not obtain directory status
|| lack of necessary directories, like cron.monthly, ...
 
but there's also one known issue. this case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. So this case is known to fail in the future too
|| [[http://bugzilla.yoctoproject.org/show_bug.cgi?id=672 bug672]]
 
[[http://bugzilla.pokylinux.org/show_bug.cgi?id=673 bug673]]
 
|-
|-
|| cron_allow01 || NAB || Kevin Tian || cron_allow01: line 200: useradd: not found || /bin/sh: cron_allow01: not found || same reason as cron_deny01 || n/a
|| su01 || NAB || Kevin Tian || su01: line 175: userdel: not found || sh: /home/root/ltp/ltp/testcases/bin/su01_s1: not found  
|| su01_s1 uses '/usr/bin/expect' as the interpreter, which I don't think needs to add into yocto. so this will remain as a failure
 
there's one issue though, that /bin/sh is still linked to busybox even when bash is included in LSB profile, which makes the error message inaccurate. with bash the error becomes "/usr/bin/expect: bad interpreter"
 
|| [[http://bugzilla.pokylinux.org/show_bug.cgi?id=674 bug674]]
|-
|-
|| cron_dirs_checks01 || not started || Kevin Tian || FAIL: /etc/cron.d. Could not obtain directory status || FAIL: /etc/cron.d. Could not obtain directory status || n/a || n/a
|| sysctl03 || NAB || Kevin Tian || TWARN  : this test's results are based on potentially undocumented behavior in the kernel. read the NOTE in the source file for more details || TWARN  : this test's results are based on potentially undocumented behavior in the kernel. read the NOTE in the source file for more details
|| TWARN is not a failure, especially in this case sysctl03 throws out the warning when the kernel version >2.6.32.
 
since we have 2.6.37, this is expected
|| n/a
|-
|-
|}
|}

Latest revision as of 03:11, 18 March 2011

1.0/M4 - RC2

total: 27

  • NEW Intro: 2 (mtest01, mtest01w)
  • LTP: 2
  • NAB: 23
  • Fixed: 0
  • Disappear in this build without fixing: 0

New introduced failed cases:

LTP cases status owner error msg lsb comment bugzilla
mtest01 n/a n/a mtest01 0 TINFO  : Total memory used needed to reach maxpercent = 409254 kbytes mtest01 0 TINFO  : Total memory already used on system = 429332 kbytes mtest01 1 TFAIL  : More memory than the maximum amount you specified is already being use N/T n/a n/a
mtest01w n/a n/a mtest01 0 TINFO  : Total memory used needed to reach maxpercent = 409254 kbytes mtest01 0 TINFO  : Total memory already used on system = 429332 kbytes mtest01 1 TFAIL  : More memory than the maximum amount you specified is already being use N/T n/a n/a

1.0/M4 - RC1

total: 25

  • NEW Intro: 0
  • LTP: 2
  • NAB: 23
  • Fixed: 0
  • Disappear in this build without fixing: 2(tar, open08)
LTP cases status owner error msg lsb comment bugzilla
lchown02 LTP Kevin Tian Fail to modify tfile_1 ownership(s) N/T n/a n/a
lchown02_16 LTP Kevin Tian Fail to modify tfile_1 ownership(s) N/T n/a n/a
cron NAB Kevin Tian cron_tests.sh: line 102: crontab: not found; tail: cannot open `/var/log/messages' for reading: No such file or directory N/T in yocto crontab is recorded in /var/log/sysctl n/a
ioctl03 NAB Kevin Tian Error Opening /dev/net/tun: No such file or directory N/T tun is an optional kernel feature, not included in the kernel config for current profile n/a
unzip01 NAB Kevin Tian unzip output differs from expected output. Details PASS busybox has a different output format n/a
syslog01 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: *.crit: not found; /var/log/maillog no such log file N/T n/a n/a
syslog02 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: mail.emerg: not found; /var/log/maillog no such log file N/T n/a n/a
syslog03 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: daemon.info: not found; /var/log/messages no such log file N/T n/a n/a
syslog04 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: user.info: not found; /var/log/messages no such log file N/T n/a n/a
syslog05 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: user.info: not found; /var/log/messages no such log file N/T n/a n/a
syslog07 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: user.debug: not found; grep: /var/log/messages: No such file or directory N/T n/a n/a
syslog08 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: user.info: not found; /var/log/messages no such log file N/T n/a n/a
syslog09 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: user.debug: not found; /var/log/messages no such log file N/T n/a n/a
syslog10 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: user.debug: not found; /var/log/messages no such log file N/T n/a n/a
gzip01 NAB Kevin Tian gzip: invalid option -- 'r' PASS busybox doesn't support "-r" option n/a
cpio NAB Kevin Tian cpio: invalid option -- 'o' PASS busybox doesn't support "-o" option n/a
logrotate NAB Kevin Tian INIT: command logrotate not found N/T n/a n/a
file NAB Kevin Tian file_test.sh: line 576: rpmbuild: not found /usr/src/rpm/SRPMS/cprog-0.0.7-3.src.rpm: cannot open `/usr/src/rpm/SRPMS/cprog-0.0.7-3.src.rpm' (No such file or directory) N/T two reasons for LSB failure:

a) LTP's own problem - there's no check whether /usr/src/rpm/SRPM exists or not, which contributes to "No such file or directory" error;

b) rpm5 has different output as rpm.org. "RPM v3.0 bin" is generated while "RPM v3.0 src" is expected

n/a
mtest06_2 NAB Kevin Tian main(): mmap(): Cannot allocate memory N/T PASS by enlarging memory size to 1278M, because this test case requires 1G free memory n/a
cron_deny01 NAB Kevin Tian Could not add test user c01_user to system N/T SDK profile doesn't contain cron;

LSB profile has multiple issues:

1) lsb's own error (use /var/spool/cron/deny while /etc/cron.deny is expected by cronie)

2) PATH contains ending colon which results "cron_deny01 not found" error

3) cronie itself lacks of necessary files and permissions to support non-root user using crontab

[bug672]

[bug673]

cron_allow01 NAB Kevin Tian cron_allow01: line 200: useradd: not found N/T same reason as cron_deny01 [bug672]

[bug673]

cron02 NAB Kevin Tian cron02: line 79: useradd: not found;Could not add test user c01_user to system N/T same reason as cron_deny01

and one more specific reason. LTP cron test assumes vixie-cron behavior, which allows any user to use crontab if there's no /etc/cron.deny and /etc/cron.allow. cronie however enforces the reverse, that only superuser is allowed under that condition. LTP test case needs to be enhanced to explicitly set cron.allow before the test.

report to LTP

[bug672]

[bug673]

cron_dirs_checks01 NAB Kevin Tian FAIL: /etc/cron.d. Could not obtain directory status N/T lack of necessary directories, like cron.monthly, ...

but there's also one known issue. this case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. So this case is known to fail in the future too

[bug672]

[bug673]

su01 NAB Kevin Tian su01: line 175: userdel: not found N/T su01_s1 uses '/usr/bin/expect' as the interpreter, which I don't think needs to add into yocto. so this will remain as a failure

there's one issue though, that /bin/sh is still linked to busybox even when bash is included in LSB profile, which makes the error message inaccurate. with bash the error becomes "/usr/bin/expect: bad interpreter"

[bug674]
sysctl03 NAB Kevin Tian TWARN  : this test's results are based on potentially undocumented behavior in the kernel. read the NOTE in the source file for more details N/T TWARN is not a failure, especially in this case sysctl03 throws out the warning when the kernel version >2.6.32.

since we have 2.6.37, this is expected

n/a

1.0/M2

total: 34 (100% audited)

  • LTP: 2
  • NAB: 26
  • Fixed: 6

pending: 0

not started: 0

LTP cases status owner error msg lsb comment bugzilla
lchown02 LTP Kevin Tian Fail to modify tfile_1 ownership(s) Fail to modify tfile_1 ownership(s) n/a n/a
lchown02_16 LTP Kevin Tian Fail to modify tfile_1 ownership(s) Fail to modify tfile_1 ownership(s) n/a n/a
ld Fixed Kevin Tian ld01: line 149: file: not found; FAIL - ld failed to build a shared object ld01: line 75: gcc: not found PASS after copying 'file' utility to SDK profile

but I'm not sure whether we want to pull this into SDK profile.

[bug676]
ldd Fixed Kevin Tian ldd01: line 99: file: not found; ldd01: line 100: ldd: not found dd01: line 99: gcc: not found PASS after copying 'ldd' utility to SDK profile

ldd package is actually generated already. this one is good to be included into SDK profile as a development utility

[bug676]
chroot01 Fixed Kevin Tian Received unexpected error - 13 : Permission denied PASS this case expects an -EPERM (if /var is set with 755 permission bits), but not sure why SDK image in M2 has the permission bits of /var as 0700 which results -EACCES returned. latest master has no this issue. will monitor in later tests. n/a
mtest06 Fixed Kevin Tian caught unexpected signal - 11 --- exiting same error in lsb PASS in 01/11 nightly test

will recheck in next milestone test

n/a
at_deny01 Fixed Kevin Tian TCONF  : at command not found on system at_deny01: line 194: /etc/init.d/atd: not found similar reason as cron_deny01, that we don't have a right environment for normal user to use at. [bug675]

bug5

at_allow01 Fixed Kevin Tian TCONF  : at command not found on system at_allow01: line 185: /etc/init.d/atd: not found similar reason as cron_deny01, that we don't have a right environment for normal user to use at. [bug675]

bug5

cron NAB Kevin Tian cron_tests.sh: line 102: crontab: not found; tail: cannot open `/var/log/messages' for reading: No such file or directory crontab activity not recorded in /var/log/messages. in yocto crontab is recorded in /var/log/sysctl n/a
ioctl03 NAB Kevin Tian Error Opening /dev/net/tun: No such file or directory Error Opening /dev/net/tun: No such file or directory tun is an optional kernel feature, not included in the kernel config for current profile n/a
unzip01 NAB Kevin Tian unzip output differs from expected output. Details PASS busybox has a different output format n/a
syslog01 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: *.crit: not found; /var/log/maillog no such log file PASS n/a n/a
syslog02 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: mail.emerg: not found; /var/log/maillog no such log file PASS n/a n/a
syslog03 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: daemon.info: not found; /var/log/messages no such log file PASS n/a n/a
syslog04 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: user.info: not found; /var/log/messages no such log file PASS n/a n/a
syslog05 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: user.info: not found; /var/log/messages no such log file PASS n/a n/a
syslog07 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: user.debug: not found; grep: /var/log/messages: No such file or directory PASS n/a n/a
syslog08 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: user.info: not found; /var/log/messages no such log file PASS n/a n/a
syslog09 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: user.debug: not found; /var/log/messages no such log file PASS n/a n/a
syslog10 NAB Kevin Tian /etc/init.d/syslog: /etc/syslog.conf: line 2: user.debug: not found; /var/log/messages no such log file PASS n/a n/a
tar NAB Kevin Tian tar_tests.sh: line 172: file: not found; tar: zcvf option failed to create a compressed tar file PASS busybox supports less options than standard tar n/a
gzip01 NAB Kevin Tian gzip: invalid option -- 'r' PASS busybox doesn't support "-r" option n/a
cpio NAB Kevin Tian cpio: invalid option -- 'o' PASS busybox doesn't support "-o" option n/a
logrotate NAB Kevin Tian INIT: command logrotate not found PASS n/a n/a
file NAB Kevin Tian file_test.sh: line 162: file: not found home/root/ltp/ltp/tmp/cprog: cannot open `/home/root/ltp/ltp/tmp/cprog' (No such file or directory); file09 9 TBROK  : rpm command broke. Reason:warning: Could not canonicalize hostname: qemux86; error: Could not open /usr/src/rpm/SRPMS/cprog-0.0.7-3.src.rpm: No such file or directory two reasons for LSB failure:

a) LTP's own problem - there's no check whether /usr/src/rpm/SRPM exists or not, which contributes to "No such file or directory" error;

b) rpm5 has different output as rpm.org. "RPM v3.0 bin" is generated while "RPM v3.0 src" is expected

n/a
open08 NAB Kevin Tian unexpected error - 13 : Permission denied - expected 21 PASS n/a n/a
mmapstress06 NAB Kevin Tian mmapstress06: errno = 12; large mmap failed for this test to run, it needs a mmap space of 32769 pages same in lsb PASS with "-m 512". not enough free memory. at least 128M is required. n/a
mtest06_2 NAB Kevin Tian main(): mmap(): Cannot allocate memory same error in lsb PASS by enlarging memory size to 1278M, because this test case requires 1G free memory n/a
cron_deny01 NAB Kevin Tian Could not add test user c01_user to system /bin/sh: cron_deny01: not found SDK profile doesn't contain cron;

LSB profile has multiple issues:

1) lsb's own error (use /var/spool/cron/deny while /etc/cron.deny is expected by cronie)

2) PATH contains ending colon which results "cron_deny01 not found" error

3) cronie itself lacks of necessary files and permissions to support non-root user using crontab

[bug672]

[bug673]

cron_allow01 NAB Kevin Tian cron_allow01: line 200: useradd: not found /bin/sh: cron_allow01: not found same reason as cron_deny01 [bug672]

[bug673]

cron02 NAB Kevin Tian cron02: line 79: useradd: not found;Could not add test user c01_user to system /bin/sh: cron_pos_tests.sh: not found same reason as cron_deny01

and one more specific reason. LTP cron test assumes vixie-cron behavior, which allows any user to use crontab if there's no /etc/cron.deny and /etc/cron.allow. cronie however enforces the reverse, that only superuser is allowed under that condition. LTP test case needs to be enhanced to explicitly set cron.allow before the test.

report to LTP

[bug672]

[bug673]

cron_dirs_checks01 NAB Kevin Tian FAIL: /etc/cron.d. Could not obtain directory status FAIL: /etc/cron.d. Could not obtain directory status lack of necessary directories, like cron.monthly, ...

but there's also one known issue. this case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. So this case is known to fail in the future too

[bug672]

[bug673]

su01 NAB Kevin Tian su01: line 175: userdel: not found sh: /home/root/ltp/ltp/testcases/bin/su01_s1: not found su01_s1 uses '/usr/bin/expect' as the interpreter, which I don't think needs to add into yocto. so this will remain as a failure

there's one issue though, that /bin/sh is still linked to busybox even when bash is included in LSB profile, which makes the error message inaccurate. with bash the error becomes "/usr/bin/expect: bad interpreter"

[bug674]
sysctl03 NAB Kevin Tian TWARN  : this test's results are based on potentially undocumented behavior in the kernel. read the NOTE in the source file for more details TWARN  : this test's results are based on potentially undocumented behavior in the kernel. read the NOTE in the source file for more details TWARN is not a failure, especially in this case sysctl03 throws out the warning when the kernel version >2.6.32.

since we have 2.6.37, this is expected

n/a
Retrieved from "https://wiki.yoctoproject.org/wiki/index.php?title=Qemux86-ltp&oldid=974"