Yocto 1.2 Features: Difference between revisions

From Yocto Project
Jump to navigationJump to search
 
(163 intermediate revisions by 9 users not shown)
Line 16: Line 16:
== Process for Entering New Feature Requests ==
== Process for Entering New Feature Requests ==


* Open a bug in the Yocto bugzilla setting the type of bug to be an "enhancement" request. The detail about the request should be included in the bugzilla report.
* Create a new entry in the appropriate feature table below (Poky, SDK, Hardware)
* Create a new entry in the appropriate feature table below (Poky, SDK, Hardware)
** Suggestion:  start by copying an existing request as a template
** Suggestion:  start by copying an existing request as a template
* Give the feature a short, descriptive name
* Give the feature a short, descriptive name
* Provide a one or two sentence brief description of the feature
* Set the priority as appropriate (see the legend below)
* Set the priority as appropriate (see the legend below)
* Set the Status to "Review"
* Set the Status to "Review"
* In the Source field, enter your name along with the origination of the request (e.g. OSV, OEM, Community) if applicable; provide as much detail here as you can
* In the Source field, enter your name along with the origination of the request (e.g. OSV, OEM, Community) if applicable; provide as much detail here as you can
* In the Comments / Bugzilla field, provide any additional information for the request, such as a link to a bugzilla entry
* In the Comments / Bugzilla field, provide any additional information for the request includind a link to a bugzilla entry
* Preview your Entry to make sure it looks ok and then save it
* Preview your Entry to make sure it looks ok and then save it


Line 37: Line 37:


{| border="1"
{| border="1"
||'''Feature Name''' ||'''Description''' ||'''Priority''' ||'''Status''' ||'''Source''' ||'''Comments / Bugzilla Links'''
||'''Feature Name''' ||'''Priority''' ||'''Status''' ||'''Source''' ||'''Comments / Bugzilla Links'''
|-
|-
||Placeholder feature name || Placeholder description of the feature || 1, 2, or 3 || Review|| name|| Comment
||Placeholder feature name || 1, 2, 3 or 4 || Review|| Name|| Comment + Link
|}
|}


Line 45: Line 45:
{| border="1"
{| border="1"
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
| align="center" style="background:#f0f0f0;"|'''Description'''
| align="center" style="background:#f0f0f0;"|'''Priority'''
| align="center" style="background:#f0f0f0;"|'''Priority'''
| align="center" style="background:#f0f0f0;"|'''Status'''
| align="center" style="background:#f0f0f0;"|'''Status'''
Line 52: Line 51:
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
|-
|-
| Build Appliance: Pre-configured VM Build image built by Yocto||||1||Review||davest/tracey/RP||TBD||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1557
| Build Appliance: Pre-configured VM Build image built by Yocto||1||Review||davest/tracey/RP||Saul (PRC)||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1557
|-
|-
| Visual Hob ||Massively update interface for Hob, perhaps similar to SuSE Studio. This is for both local (non-network) builds as well as network.||1||Review||davest/tracey/RP||TBD||xx
| Hob improvements||1||Review||davest/tracey/RP||Joshua/Jessica||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1559
|-
|-
| Hob improvements||||1||Review||davest/tracey/RP||TBD||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1559
| Hob v2 - Interface updates? ||1||Review||davest/tracey/RP||Ke & PRC Team||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1588
|-
|-
| Support for non-developers||Create clear instructions for how a Windows user can take an example image from the YP web site and deploy it to a board. Assume no Linux knowledge. These instructions should be applicable in example images in BSPs ||1||Review||davest/tracey/RP||TBD||xx
| Improve user experience under Windows||1||Review||davest/tracey/RP||Scott R.||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1586
|-
|-
| Firewall / Proxy handling in git||Develop a git plugin which will fall back to tunneling through HTTP if the git:// interface will not work because it is blocked by a firewall and the correct proxy is not set up. ||2||Review||davest/tracey/RP||TBD||same for svn,hg,ftp,etc? -dvhart
| Error Handling Improvements||1||Review||||Scott G||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1543
|-
|-
| Build Yocto behind firewall - implementation||||2||Dev||Dave||Darren/Joshua||Yocto 1.2, from 1.1, the above one seems to be part of this.
| Firewall / Proxy handling in git||2||Review||davest/tracey/RP||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1585
|}
|}


Line 68: Line 67:
{| border="1"
{| border="1"
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
| align="center" style="background:#f0f0f0;"|'''Description'''
| align="center" style="background:#f0f0f0;"|'''Priority'''
| align="center" style="background:#f0f0f0;"|'''Priority'''
| align="center" style="background:#f0f0f0;"|'''Status'''
| align="center" style="background:#f0f0f0;"|'''Status'''
Line 75: Line 73:
| align="center" style="background:#f0f0f0;"|'''Due'''
| align="center" style="background:#f0f0f0;"|'''Due'''
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
|-
| Make BasicHash the default ||1||Review||RP||Lianhao(Jessica/RP)||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1555
|-
| Address git fetcher mirror issues||2||Review||RP||Richard||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1511
|-
| Recipe specific configuration (e.g. Gstreamer)||2||Resolved||||Richard / Resolved||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=923
|-
| Finish and enable PR server||2||Review||Lianhao||Lianhao||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1126
|-
| Host intrusion prevention/Swabber||2||Review||Joshua||Joshua||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1582
|-
|-
| Recipe-specific sysroot||||3||Review||from 1.0||Saul (Dongxiao)||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1560
| Yocto OOPS-type messages||2.5||Review||LCS||Paul to Investigate for 1.3 Feature||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1562
|-
|-
| Handle old versions in WORKDIR||||3||Review||from 1.0||||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1561
| Recipe-specific sysroot||3||Review||from 1.0||Dongxiao||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1560
|-
|-
| Build Appliance: Pre-configured VM Build image (desktop Linux OS)||||3||Review||LCS||||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1558
| Handle old versions in WORKDIR||3||Review||from 1.0||Kai (WR)||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1561
|-
|-
| Yocto OOPS-type messages||||2.5||Review||LCS||||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1562
| Ability to build SRPM||3||Review||RP Notes||Jeff Polk/Mark||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1591
|-
|-
| Ability to archive work dir||Add the ability to archive the work directory to handle the GPL compliance issue.||3||Review||LCS||||1.2||Yocto 1.2, On Janitor\'s list
| Binary package install class||3||Review||||Kai (WR)||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1592
|-
| Disk space monitoring||3||Review||RP and Robert||Robert (WR)||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1589
|-
| Ability to archive work dir||3||Review||LCS||Wenzong (WR)||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1590
|-
| Support for remote layers||3||Review||Community||Paul||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1598
|-
| Build Appliance: Pre-configured VM Build image (desktop Linux OS)||4||Review||LCS||||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1558
|-
| Depexp functionality without X||4||Review||Joshua||||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1658
|}
|}


Line 90: Line 108:
{| border="1"
{| border="1"
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
| align="center" style="background:#f0f0f0;"|'''Description'''
| align="center" style="background:#f0f0f0;"|'''Priority'''
| align="center" style="background:#f0f0f0;"|'''Priority'''
| align="center" style="background:#f0f0f0;"|'''Status'''
| align="center" style="background:#f0f0f0;"|'''Status'''
Line 98: Line 115:
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
|-
|-
| Patch Test System||Create a machine where developers can upload/test patches before submitting them to master to ensure builds won\'t break when patches are added. (developer autobuilders? Fuzz builds?)||2||Review||Team||Jiajun||1.2||This should work already for the pokycontrib tree
| Package History||1||Review||RP|||Paul||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1565
|-
| Package History Analysis Tool||1|||Review||RP|||Paul||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1566
|-
|QA Tests: Add recipe for LSB Tests and automate test||2||Review||||Yizhao||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1567
|-
|QA Tests: Add recipe for posix Tests and automate test||2||Review||||Jiajun||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1568
|-
|-
| Open Source Test Cases||Perform technical, legal, and QA steps necessary to move test cases into open source.||3||Review||QA||||1.2||Yocto 1.2
|Open Source Test Cases||2||Review||QA||Jiajun (Song)||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1595
|-
|-
| Start a framework for automated BSP testing||Build-testing is only half the job of BSP testing, and new BSP development is and will be ramping up even more rapidly soon. We need to start building a framework to make as much of this as automated as possible. Phase I, what we can complete for 1.2, should be the ability to load an image from the autobuilder and make it ready for booting, or actually boot it, on a given target. It would be good to use systems running Yocto images as much as possible for this.||2||Review||Tom||||1.2||Maybe use CATS?
| Collect data at build time to increase accuracy of estimation (hob)||2||Resolved||||Paul / Closed||1.2||Is this really Package History Now?  http://bugzilla.yoctoproject.org/show_bug.cgi?id=1316
|-
|-
| Test framework||this is a test framework that we can include in the distribution||3||Review||RP Notes||||1.2||Yocto 1.2 - Is it the TI’s test framework we discussed before? A:  Not necessarily, we\'re still waiting for someone to step up and really take ownership of this area but it needs some resource commitment as its not a simple task.
|QA Tests: Add recipe for rt Tests and automate test||3||Review||||||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1569
|-
|-
| Package History||||1||Review||RP||||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1565
|QA Test improvements - consider fedora/gentoo runtime security tools||3||Review||Joshua||Jiajun||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1584
|-
|-
| Package History Analysis Tool||||1||Review||RP||||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1566
| Automate BSP Testing||4||Review||Tom||||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1596
|-
|-
| Extend current QA Tests||||1||Review||RP||||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1567 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1568 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1569
| Test framework||4||Review||RP Notes||||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1594
|}
|}


== Meta Data ==
== Core Meta Data ==
{| border="1"
{| border="1"
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
| align="center" style="background:#f0f0f0;"|'''Description'''
| align="center" style="background:#f0f0f0;"|'''Priority'''
| align="center" style="background:#f0f0f0;"|'''Priority'''
| align="center" style="background:#f0f0f0;"|'''Status'''
| align="center" style="background:#f0f0f0;"|'''Status'''
Line 124: Line 146:
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
|-
|-
| Replacement for video/audio players currently in Yocto||Codec…||3||Review||Meta-data||||1.2||Yocto 1.2
| build statistics reporting||2||Review||eflanagan||Beth||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1612
|-
| Sanity checks on per recipe basis||2||Review||RP Notes||Scott G||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=405
|-
| Package Documentation Audit:  All recipes build||2||||Team||Scott G||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1619
|-
| Parallel Locale Generation ||2||Done||RP||RP - Resolved||1.2||Resolved? http://bugzilla.yoctoproject.org/show_bug.cgi?id=1554
|-
| Clean up warning messages||2||Review||||Saul||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1544
|-
| Multilib: Enhance gcc recipe to support multilibs||2||Review||RP||Nitin||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1549
|-
|-
| Investigate New UI||For demos, we would like need a reference UI that is not Sato. Investigate possibilities that the Yocto team won\'t need to maintain. OpenBox? Gnome-desktop? GP? LXDE? KDE Mobile?||3||Review||Meta-data||||1.2||Yocto 1.2
| Multilib: Complete recipe enablement||2||Review||RP||Dongxiao||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1563
|-
|-
| Qemugl upstreaming||Opengl ES Support||3||Review||Meta-data||||1.2||Yocto 1.2
| Multilib: Drop MULTILIB_IMAGE_INSTALL||2||Review||RP||Dongxiao||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1564
|-
|-
| selinux patch integration||add SE Linux patches in a similar way to PAM||3||Review||Meta-data||||1.2||Yocto 1.2
| Multilib: Document||2||Review||RP||Scott R||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1622
|-
|-
| build statistics reporting||As someone interested in how long it takes to build different images on different hardware configurations and other assorted build metrics, I would like a web based service, that takes output generated by an extended buildstats.bbclass and stores it, to compare against different machines. The end result should be a way to visualize the collected data. See: https://wiki.yoctoproject.org/wiki/Yocto_Buildbot_Autobuilder_Discussions||2||M3, Sprint A||eflanagan/Jay7/ka6sox||Beth/Jay||1.2||Yocto 1.2, from 1.1
| MeeGo GPLv2 Sync||2||Review||RP Notes||Saul||1.2|| http://bugzilla.yoctoproject.org/show_bug.cgi?id=1618
|-
|-
|Document multiple library versions co-existing||||3||Review||Team||Saul (Dongxiao?)||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1548
| Finish Oracle/Sun Hotspot JDK/JRE support||2||Review||Tom||Nitin/Tom||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1620
|-  
| Running post installs at rootfs gen time||2||Review||RP Notes||Dexuan||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1621
|-
|-
| Embedded java environment or even JDK support||||3||Review||Team||||1.2||Yocto 1.2
| Fix Runtime POSIX Issue||2||Review||Team||Kai||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1623
|-
|-
| Target module build||Allow for building kernel modules on the target device||2||Review||RP Notes||Darren||1.2||Yocto 1.2, On Janitor\'s list
| License file cleanup ||2||Review||Beth||Beth||1.2||1 week http://bugzilla.yoctoproject.org/show_bug.cgi?id=1547
|-
|-
| gtk+ sato filechooser patch||||3||Review||RP Notes||||1.2||Yocto 1.2
| QEMU GL Enhancements||2||Review||Meta-data||Edwin||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1624
|-
|-
| sato refresh||||3||Review||RP Notes||||1.2||Yocto 1.2
| Init Selection as Distro Feature||2||Review||Joshua||Joshua w/Kai||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1625
|-
|-
| Sanity checks on per recipe basis||||2||Accept||RP Notes Bug#405||Saul (Scott G)||1.2||Yocto 1.2, from 1.1
| Document multiple library versions co-existing||3||Review||Team||Scott R||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1548
|-
|-
| perf scripting\' integration||Make it easy and convenient for the user to write and execute \'perf scripts\' from the IDE. We should be able to leverage and build on the Systemtap integration for this.||2||Dev||Tom||Jessica/Tom||1.2||Yocto 1.2, from 1.1
| Enhance TARGET_VENDOR field support||3||Review||RP||Ke||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1550
|-
| selinux patch integration||3||Review||Meta-data||ScottG w/WR||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1609
|-
| gtk+ sato filechooser patch||3||Review||RP Notes||Xiaofeng/Joshua||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1615
|-
| Investigate New UI||4||Review||Meta-data||Paul||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1606
|-
| Implement Factory reset||4||Review||Joshua||Joshua||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1593
|-
| Embedded java environment or even JDK support||4||Review||Team||Saul||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1613
|}
|}


== Autobuilder ==
== Other Layer Meta Data ==
{| border="1"
{| border="1"
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
| align="center" style="background:#f0f0f0;"|'''Description'''
| align="center" style="background:#f0f0f0;"|'''Priority'''
| align="center" style="background:#f0f0f0;"|'''Priority'''
| align="center" style="background:#f0f0f0;"|'''Status'''
| align="center" style="background:#f0f0f0;"|'''Status'''
Line 160: Line 203:
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
|-
|-
| autobuilder layer support||||2||||Beth||Beth||1.2||2 weeks
| x32 Enhancements||2||Review||||Nitin||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1579
|-
|-
| autobuilder split of nightly (really an M4 task) few days license.bbclass refactor||||2||||Beth||Beth||1.2||1 week
| BSPs or layers for a specific category of devices ||2||Review||Dirk/Dave/Andy||Shane||1.2|| http://bugzilla.yoctoproject.org/show_bug.cgi?id=1626
|-
|-
| buildstats memory measurements||||2||||Beth||Beth||1.2||1 week and half
| Security layer||4||Review||Joshua||||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1597
|-
| license manifest||||2||||Beth||Beth||1.2||1 week
|-
| autobuilder release checkbox (running a yocto release right from the autobuilder)||||2||||Beth||Beth||1.2||2 weeks
|}
|}


== BSPs ==
== Infrastructure ==
{| border="1"
{| border="1"
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
Line 182: Line 221:
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
|-
|-
| AMT driver integration||incorporate Linux AMT into the Yocto BSPs||||||||||1.2||Intel
| autobuilder layer support||need detail||2||Review||Beth||Beth||1.2|| 2 weeks, http://bugzilla.yoctoproject.org/show_bug.cgi?id=1628
|-
|-
| Zaurusd++ (devmand?)||I keep seeing changes to toggle certain features for various boards (audio on the beagleboard, N450 and  spring to mind), rather than writing lots of recipes for this perhaps we could resurrect zaurusd and evolve it to reflect the projects original goals as devmand; a daemon to handle hardware quirks across a range of boards and devices. ||||||||||1.2||Joshua
| buildstats memory measurements||need detail||2||Review||Beth||Beth||1.2||1 week and half, http://bugzilla.yoctoproject.org/show_bug.cgi?id=1629
|-
|-
| BSP update/intro||determine and integrate / create arch reference BSPs (e500, Cortex, ARM, MIPs)||2||Dev||Bruce/Richard/team||Bruce||1.2||Yocto 1.2, from 1.1
| autobuilder clean sstate option||||2||Review||Beth||Beth||1.2|| http://bugzilla.yoctoproject.org/show_bug.cgi?id=1627
|-
|Drop Grub for Syslinux || Grub is considerably more complicated than we need for any of our current BSPs. Syslinux can be used in place of every known usage of Grub. For upcoming EFI BSPs, we can look to Efilinux. This will reduce our bootloader maintenance burden and simplify our images. || 2 || Review || Darren || Darren || 1.2 ||
|-
|-
|Integrate alsa-state || Remove all the BSP specific $MACHINE-audio recipes in favor of the more generic alsa-state mechanism in use by OE already. || 1 || Review || Darren || || 1.2 || This possibly conflicts with the item to refresh zaurusd.
| Eval Patch management tools||||3||Review||RP Notes||||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1632
|-
|-
|Upgrade to EFI ||Where possible, update our existing BSPs to boot using EFI. This will support development of efilinux as well as help us prepare for the newer boards which will be EFI only. || 2 || Review || Darren || Darren || 1.2 ||
| Bugzilla to Wiki||||2.5||Review||Darren||||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1631
|-
|-
|BSP/kernel wrappers/wizards || Create some simple scripts or 'wizards' that make it easy for users to start writing a new BSP and/or easily make simple kernel modifications to a BSP.  Ideally, users shouldn't need to know anything low-level about the kernel, git, or the mechanics of appending config items to recipes in order to get a BSP up and running or to make the simple modifications needed to tweak or maintain it. || 2 || Review || tomz || tomz || 1.2 ||
| Provide a click through license mechanism||||2||Review||Tom||Tom||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1630
|}
|}


== ADT ==  
== BSPs ==
{| border="1"
{| border="1"
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
Line 208: Line 245:
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
|-
|-
| Enhance the deploy part in remote debug||ADT is currently using org.eclipse.cdt.remote.launch for remote debug. One limitation in this plug-in is that it can only deploy one single file to the target during the debug. Though it is ok for debugging static linked program, debugging dynamic linked program might require deploying multiple files(including executables and libraries) to the target.||2||Review||Lianhao||Jessica||1.2||
| Improve device management||[Need plan from Joshua]|| 2 ||Review||||Joshua/Darren||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1608
|-
|-
| Secure login||||2||Review||ADT Team||Jessica||1.2||Yocto 1.2
| BSP update/intro||||2||Review||Bruce/Richard/team||Bruce||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1634
|-
|Drop Grub for Syslinux |||| 2 || Review || Darren || Darren || 1.2 ||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1635
|-
|-
| Linux tools upstream integration||There're some activities within the Eclipse Linux Tools community for various tools remote invocation improvement, we need to sync up with the community for their latest deliveries and make some contribution if possible ||2||Review||ADT Team||Jessica||1.2||Yocto 1.2
|Upgrade to EFI |||| 2 || Review || Darren || Darren || 1.2 ||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1636
|-
|-
| Add recipe supporting autoconf-nativesdk and automake-nativesdk ||The new libtool m4 macros(supporting --with-libtool-sysroot) resides in the directory  where host aclocal can not find it by default. This requires the user to manually add that directory using -I options. Adding automake(autoconf)-nativesdk into meta-toolchain would help this. ||2||Review||Lianhao||||1.2||Yocto 1.2
| replace qemuppc|||| 2 ||Review||||Bruce||1.2||http://bugzilla.pokylinux.org/show_bug.cgi?id=1638
|-
|-
|Eclipse BSP/Kernel Plugin || Provide an Eclipse plugin to facilitate configuring new BSPs and streamlining the linuix-yocto development workflow. || 2 || Review || Darren || || 1.2 ||
| streamline meta-intel kernel config options |||| 2 ||Review||Tom||Tom||1.2||http://bugzilla.pokylinux.org/show_bug.cgi?id=1661
|-
|-
| enhance the bitbake commander eclipse plugin || By having the Eclipse as a frontend UI to bitbake server, eclipse may talk to bitbake server, enable the user to glimpse on the variables' values when editing the recipes, try out building the recipe being edited, etc.  ||2||Review||Dongxiao/Lianhao||TBD||TBD|| This requires new features both in eclipse plugin and bitbake server.
| add crownbay video acceleration |||| 2 ||Review||Tom||Tom||1.2||http://bugzilla.pokylinux.org/show_bug.cgi?id=1660
|}
|}


== Documentation ==
== ADT / Tools and Support ==  
{| border="1"
{| border="1"
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
Line 232: Line 271:
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
|-
|-
| Various Demo Videos||The idea here is to create screen-capture type tutorials similar to what exists for the ADT Eclipse Plug-in. However, we want to contract out some help for professional voice-over talent to be used with the images. These don\'t have to be limited to screen-capture material but could include well-done PPT decks - similar to how other business units in Intel create various training modules. For 1.1 it would be good to capture the script for the existing ADT Eclipse Plug-in module and have it voiced over. Also, for 1.1 it would be good to create a similar module for the Image Creator application.||2||Not Started||From ADT module and scratch||ScottR||1.2||Q3 at the earliest
| Enhance the deploy part in remote debug||||3||Review||Lianhao||Jessica||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1600
|-
| Secure login||||3||Review||ADT Team||Jessica||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1601
|-
| Linux tools upstream integration||||3||Review||ADT Team||Jessica||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1602
|-
| Add recipe supporting autoconf-nativesdk and automake-nativesdk ||||2||Review||Lianhao||Kai/Lianhao||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1603
|-
|Eclipse BSP/Kernel Plugin || This one is Jessica's, Tom's tracked elsewhere || 2 || Review || Darren || Jessica || 1.2 ||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1610
|-
| enhance the bitbake commander eclipse plugin ||||2||Review||Dongxiao/Lianhao||Jessica/Lianhao||1.2|| http://bugzilla.yoctoproject.org/show_bug.cgi?id=1611
|-
| Tracing: tuna, oscilloscope recipes||Need detail||3||Review||from 1.0||||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1639
|-
| Tracing/profiling HOWTOs||||2||Review||Tom||Tom||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1640
|-
| Profiling: Valgrind tools in Eclipse||||2||Review||Dave/JZ||Jessica||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1580
|-
| Tracing: Systemtap usability in Yocto||||2||Review||Tom||Tom||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1551
|-
| Tracing: create separate recipe for perf||||2||Review||Tom||Tom||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1552
|-
| Tracing: perf trace scripting support||||2||Review||from 1.0||Tom||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1553
|-
| 'perf scripts' integration||Can Jessica own this own after stap (1551) is done?||2||Review||Tom||Jessica/Tom||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1617
|-
|}
|}


== Performance & usability ==
== Documentation ==
{| border="1"
{| border="1"
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
Line 246: Line 310:
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
|-
|-
| POSIX support||address POSIX failures found in 1.1||2||Review||Team||||1.2||Yocto 1.2, On Janitor\'s list
| Various Demo Videos||||2||Review||From ADT module and scratch||ScottR||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1641
|}
|}


== Kernel ==
== Kernel ==
Line 261: Line 324:
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
|-
|-
| Minimal Image unique||make minimal image smaller||3||Accept||Team||WR Distro Team||1.2||Yocto 1.2, from 1.1
| Minimal Image Config Infrastructure||||3||Review||Team||WR Distro Team??? / Darren||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1642
|-
| Kernel Tools||need detail||2||Review||Bruce/Mark||Bruce||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1643
|-
| use cases||need detail||1||Review||Bruce||Bruce||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1644
|-
| kernel bloat - development||need detail||2||Review||Darren||Darren||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1645
|-
|-
| Tracing: tuna, oscilloscope recipes||This might be more useful with the increased importance of RT||3||Review||from 1.0||||1.2||Yocto 1.2
| Fast boot time||need detail||2||Review||Team||Darren||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1646
|-
|-
| Kernel Tools||Implement plan for kernel tools||2||Dev (20%)||Bruce/Mark||Bruce||1.2||Yocto 1.2, from 1.1
|Upstream config fragments |||| 2 || Review || Darren || || 1.2 ||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1647
|-
|-
| use cases||BSP config streamlining, building the kernel standalone, yoctoization, meta data sharing||1||Accept||Bruce||Bruce||1.2||Yocto 1.2, from 1.1
|Real-time process-executed timers |||| 2 || Review || Darren || || 1.2 ||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1648
|-
|-
| kernel bloat - development||target = boot a minimal image in < 8M - development complete||1||Dev||Darren||Darren||1.2||Yocto 1.2, from 1.1, continuation needed?
|Define Kernel policy |||| 2 || Review || Darren || || 1.2 ||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1649
|-
|-
| Fast boot time||2 second boot time target||1||Dev||Team||Darren||1.2||Yocto 1.2, from 1.1, continuation needed?
| Target module build||||3||Review||RP Notes||Darren||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1614
|-
|-
|Upstream config fragments || Work with John Stultz to upstream a Linux kernel config fragment manager and rework the yocto-kernel-tools to use it. This will simplify our tooling and increase our usage/test base. || 1 || Review || Darren || || 1.2 ||
| linux-yocto-dev lock ||||1||Review||Bruce||Bruce||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1679
|-
|-
|Real-time process-executed timers || Timers currently run at the priority of the softirq that processes them and they are accounted to whichever task was preempted for them to run. This negatively impacts determinism and accounting accuracy. || 2 || Review || Darren || || 1.2 ||
| linux-yocto-dev stable update||||2||Review||Bruce||Bruce||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1680
|-
| Kernel usability scripts ||||2||Review||Tom||Tom||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1678
|-
|-
|Define Kernel policy || We need to clearly document kernel policy and make the config fragments reflect it. This will facilitate a more modular approach to building BSP kernel configs, as well as make it clear what can be expected to be supported when running a "linux-yocto kernel". || 1 || Review || Darren || || 1.2 ||
|}
|}


== Project-wide Features ==
== Unsorted ==
{| border="1"
{| border="1"
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
| align="center" style="background:#f0f0f0;"|'''Feature Name'''
| align="center" style="background:#f0f0f0;"|'''Description'''
| align="center" style="background:#f0f0f0;"|'''Priority'''
| align="center" style="background:#f0f0f0;"|'''Priority'''
| align="center" style="background:#f0f0f0;"|'''Status'''
| align="center" style="background:#f0f0f0;"|'''Status'''
Line 291: Line 360:
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
| align="center" style="background:#f0f0f0;"|'''Comments / Bugzilla Links'''
|-
|-
| LayerTooling – remote layer tool||Consider integrating Jeremy Puhlman\'s remote layers patch||2||Community||Paul||1.2||||
|Way to determine what is about to happen (similar to a dry-run)||1||Review||WR||||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1659
|-
|debuginfo export||2||Review||WR||||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1657
|-
|Recipe creation/import script||2||Review||WR|||Kai (WR)||M2?||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1656
|-
|Export source package||3||Review||WR||Xiaofeng(WR)||?||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1655
|-
|Layer tooling: Tool to combine layers||2||Review||WR||||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1654
|-
|Recipe patch tooling/workflow||2||Review||WR||||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1652
|-
|Incremental image generation||2||Review||WR||Robert (WR)||M2?||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1651
|-
|Need documentation on contributing patches and code||1||Review||WR||||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1650
|-
| rebuild udev cache if the kernel version changes||2||ACCE||||tong.lin@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1147
|-
| Unpackaged files WARNING||2||NEW||||song.liu@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1545
|-
| Handled Releases with the PR server||2||NEW||||song.liu@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1556
|-
| Buildstats memory measurements||3||NEW||||song.liu@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1605
|-
| Use the per-file dependencies in deb and ipkg packages||2||NEW||||song.liu@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1662
|-
| Document invalidation of the sstate on a per class basis||3||ACCE||||scott.m.rifenbark@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1500
|-
| New santiy check for userspace packages||3||ACCE||||scott.a.garman@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1008
|-
| bitbake -b prints meaningless error when given an invalid recipe name||1||ACCE||||scott.a.garman@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1141
|-
| Remove python stack trace when do_patch fails||1||ACCE||||scott.a.garman@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1143
|-
| Need to change numeric user/groupids to names in device_table-minimal.txt||2||ACCE||||scott.a.garman@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1159
|-
| Make bitbake output less noisy for non-error cases||2||NEW||||scott.a.garman@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1145
|-
| QEMU won\'t run on a system that does not support tunctl||2||NEW||||scott.a.garman@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1474
|-
| Display a summary of warnings and errors at the end of a bitbake command||1||NEW||||scott.a.garman@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1540
|-
| Create better interface for metrics and status gathering||2||ACCE||||saul.wold@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=205
|-
| Improve syslog configurability||2||NEW||||saul.wold@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=717
|-
| Allow logrotate to use a different file system from the original logs||3||NEW||||saul.wold@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=718
|-
| qemu: when booting from live CD, X cannot be started||2||NEW||||saul.wold@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1487
|-
|-
| running post installs at rootfs gen time||||2||Review||RP Notes||Saul (Dexuan)||1.2||
| Convert meta-toolchain to work as a poky install composed of staging/prebuild packages||3||ACCE||||richard.purdie@linuxfoundation.org||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=115
|-
|-
| Clean up warning messages||||2||Review||||Saul||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1544
| Qemu booting cost more time||3||ACCE||||richard.purdie@linuxfoundation.org||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=646
|-
|-
| Multilib: Enhance gcc recipe to support multilibs||||2||||RP||Ke||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1549
| Enable swabber to be run for only specific recipes||3||ACCE||||richard.purdie@linuxfoundation.org||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=822
|-
|-
| Multilib: Complete recipe enablement||||2||||RP||Ke||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1563
| RRECOMMENDS...-dbg causes dependency failure if no ${PN} package exists||3||ACCE||||richard.purdie@linuxfoundation.org||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=824
|-
|-
| Multilib: Drop MULTILIB_IMAGE_INSTALL||||2||||RP||Ke||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1564
| Specify paths searched when failing to find a SRC_URI||2||ACCE||||richard.purdie@linuxfoundation.org||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1179
|-
|-
| Enhance TARGET_VENDOR field support||||3||Review||RP||Ke||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1550
| Drop PKGSUFFIX and have nativesdk use multilib technology||3||ACCE||||richard.purdie@linuxfoundation.org||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1508
|-
|-
| Multi-lib - 6||Create some \"standard\" multilib configurations (x86 32+64 bit)||1||Review||RP||Ke||1.2||
| Set default gcc-cross-canadian instruction generation to TARGET_ARCH||3||ACCE||||nitin.a.kamble@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=139
|-
|-
| Eval Patch management tools||Consider patchwork, gerrit and others and see if they help. Any other alternatives?||3||Review||RP Notes||||1.2||Yocto 1.2
| Zypper: Package dependency resolution does not know about hinting||3||NEED||||mark.hatle@windriver.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=821
|-
|-
| Bugzilla to Wiki||Create a script which automatically populates and updates the Wiki based on changes in bugzilla.||2.5||Review||Darren||||1.2||Yocto 1.2
| Consider using PatchELF rather than chrpath for modifying the RPATH||3||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=806
|-
|-
| Sync qemugl with MeeGo - Implementation||sync qemugl with MeeGo is complete||2||Dev (70%)||Meta-data||Saul (Edwin)||1.2||Yocto 1.2, from 1.1
| Ensure Poky can be run on non-Linux Unices||4||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=823
|-
|-
| Tracing/profiling HOWTOs||Create a document or extend the current Yocto tracing wiki page to explain in detail how to use all the tracing tools in Yocto. It should detail not only how to use each tool individually, but also how to use them in conjunction with each other, highlighting situations in which each is most useful. There should also be some extensive worked examples of real-life use-cases and how they could be investigated using the Yocto tracing/profiling tools.||2||Accept||Tom||Tom||1.2||Yocto 1.2, from 1.1
| Add build progress indicator||3||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1221
|-
|-
| Error Handling Improvements||||1||Dev||||Saul (Scott G)||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1543
| Should be easier to find and remove packages||3||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1241
|-
|-
| replace qemuppc||||||||||Bruce||1.2||Come from bug 414
| Add more detailed data to the models used for hob state||3||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1293
|-
|-
| MeeGo GPLv2 Sync||compare with Yocto, sync any patches||2||Accept||RP Notes||Saul (Ke)||1.2||Yocto 1.2, from 1.1
| Allow customize the dev packages when building a toolchain||3||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1303
|-
|-
| Package Documentation Audit:  All recipes build||31 recipes were identified as not building during the package documentation audit done in M1, Sprint B.  Those all need to build and we need to re-run a new package documentation audit.||2||Accept||Team||Scott G||1.2||Yocto 1.2, from 1.1
| Enable removal of packages||3||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1450
|-
|-
| Tracing: Systemtap usability in Yocto||||2||Accept||Tom||Tom||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1551
| report on artifacts after image generation||3||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1572
|-
|-
| Tracing: create separate recipe for perf||||2||Review||Tom||Tom||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1552
| make it clear how to run saved hob recipes from command line||3||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1573
|-
| add additional dialogs/config for u-boot/kernel||3||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1574
|-
| configure runtime services from gui||3||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1575
|-
| configure network settings from hob gui||3||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1576
|-
| configure users and default passwords from hob gui||3||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1577
|-
| Enable customisation of image drop down||3||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1581
|-
| Provide interface for user the install Yocto SDK through IDE||3||ACCE||||jessica.zhang@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=191
|-
| native packages should use siteinfo files||3||ACCE||||jeff.polk@windriver.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=270
|-
| [AutoBuilder/FEAT] Set Bug to Fixed automatically when building in AutoBuilder||3||REOP||||elizabeth.flanagan@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=874
|-
| Put a uname and ab name in stdio||2||ACCE||||elizabeth.flanagan@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1461
|-
| License file WARNING messages||2||ACCE||||elizabeth.flanagan@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1546
|-
| Autobuilder Layer support||2||ACCE||||elizabeth.flanagan@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1604
|-
| autobuilder clean sstate checkbox||3||ACCE||||elizabeth.flanagan@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1607
|-
| Close button doesn\'t obey Fitt\'s Law||3||ACCE||||edwin.zhai@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=35
|-
| sato-icon-theme lacks generic / unknown icon||3||ACCE||||edwin.zhai@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=37
|-
| I/O schedule isn\'t no-op on flash based devices||3||NEED||||dvhart@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=66
|-
| Create a power users tips and tricks document||3||ACCE||||dvhart@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1033
|-
| Support \'~\' in version strings||3||Wait||||dongxiao.xu@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=256
|-
| Pull alsa-state into oe-core (from oe)||2|||ACCE||||dongxiao.xu@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1176
|-
| kernel: support standalone kernel builds||2||ACCE||||bruce.ashfield@windriver.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=843
|-
| mpc8315\'s tune file: \"tune-ppc603e.inc\"||3||ACCE||||bruce.ashfield@windriver.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1192
|-
| [multilib] Triggering building a 64 bit kernel with a 32 bit userspace||3||ACCE||||song.liu@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1525
|-
| Yocto website should include a glossary||2||NEED||||scott.m.rifenbark@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=557
|-
| Yocto project website should include a simplified walk-through||3||NEED||||scott.m.rifenbark@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=558
|-
| Bug reporting guide||2||ACCE||||scott.m.rifenbark@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=237
|-
| Improve SDK sysroot extensibility and workflow||3||ACCE||||scott.m.rifenbark@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=545
|-
| add documentation for swabber||3||ACCE||||scott.m.rifenbark@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=635
|-
| need a doc for qemu usage||3||ACCE||||scott.m.rifenbark@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=641
|-
| QEMU fails to launch using unfs with rpcbind installed - must have portmap.||2||ACCE||||scott.m.rifenbark@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=655- maybe resolved?
|-
| Need centralized documentation on BitBake class usage||2||ACCE||||scott.m.rifenbark@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1467
|-
| bitbake \"NoProvider\" message doesn\'t aid in resolving the problem||2||ACCE||||scott.a.garman@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=542
|-
| Improve the error reporting when SkipPackage error is raised||2||ACCE||||scott.a.garman@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1127
|-
| sstate code doesn\'t detect overwriting files||3||ACCE||||richard.purdie@linuxfoundation.org||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=238
|-
| Add a mechanism to do pre-build sanity based on specific configurations||3||ACCE||||richard.purdie@linuxfoundation.org||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=405
|-
| Usability: How to find specific variables and settings?||2||ACCE||||richard.purdie@linuxfoundation.org||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=407
|-
|-
| Tracing: perf trace scripting support||||2||Dev (50%)||from 1.0||Tom||1.2||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1553
| TCF RSE plug-in not handle the situation if the remote agent does NOT support terminal service||3||Wait||||liping.ke@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=107
|-
|-
| Monitor disk availability||Monitor disk availability and warn the user if it is running low. May only focus on a few directories, for example: poky/build and poky/build/downloads, this would solve the multiple mount point problem||2||Review||RP and Robert||WR Distro Team (Robert)||1.2||Yocto 1.2, from 1.1
| cdt.launch.remote issues on a non-canonical terminal||3||Wait||||liping.ke@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=188
|-
|-
| Ability to build SRPM||||3||Accept||RP Notes||Jeff Polk/Mark||1.2||Yocto 1.2, from 1.1
| Need a generic xorg.conf package that all the xservers can use.||3||ACCE||||ke.yu@intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1175
|-
|-
| Classes to help install binary packages||It\'s been suggested that it would be a useful feature to be able to easily take an RPM or similar containing a software binary from a 3rd party software vendor and integrate it into an image created by the build system.||2||Review||||||1.2||
| Show contents of images & tasks||2||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=991
|-
|-
| Host intrusion prevention||We have Swabber but it\'s not integrated into our process. I believe this is because there are several recipes which don\'t work when run under strace with parallelisation. We should determine a path for inclusion of swabber into our process and execute on it so that we can be aware of, and fix, any host intrusion issues.||2||Review||||||1.2||
| Show more information about packages||3||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=992
|-
|-
| Security layer||Many of our users are likely to want to use kernel level security mechanisms and so I\'d like to investigate supporting one of the in-kernel LSM (Linux Security Modules), possibly SMACK as used in MeeGo, and adding policy to the oe-core metadata. The LSM, policy and user-space tools could all be enabled via a distro feature. This work may well want to be in a separate layer?||2||Review||Joshua||||1.2||
| Preference Package Format only support one selection at a time||3||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1272
|-
|-
| Factory reset||Implement a factory reset image feature. We\'ll use one of the union mount technologies (aufs/overlayfs/union mounts) to create an overlay on the file system as the final piece of rootfs creation. The overlaid file-system will be the target of all writes made to the image after the image is generated. A user-space mechanism to disable the overlay, and therefore reset to the state of the image just after it was created, will also be provided. This feature could be further enhanced by integrating with the package manager, and other user-space switches, to create system restore points which can later be rolled back to.||2||Review||Joshua||||1.2||
| Need guidance choosing \'Base image\'||2||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1277
|-
|-
| Gstreamer||Refactor gstreamer recipes to better support COMMERCIAL_LICENSE and enabling/disabling of various codecs and features||2||Review||||||1.2||http://bugzilla.pokylinux.org/show_bug.cgi?id=923
| Built toolchain doesn\'t include development packages for image||2||NEW||||josh@linux.intel.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1302
|-
|-
| Init||Interest in systemd as a replacement for Sys V init is growing but it may not be appropriate for deeply embedded systems. I\'d like to investigate a crop of service based and process monitoring init systems and compare them on a variety of criteria as determined by the community. Furthermore I would like to investigate supporting multiple init systems, the current SysV system, systemd and possibly others. As part of this work, and because increasingly many upstreams support systemd (no doubt thanks to its adoption in Fedora) I would like to investigate implementing some infrastructure which translates from systemd units to the appropriate init format for the supported init systems.||2||Review||||||1.2||
| On qemuarm, the command \'poweroff/shutdown\' can\'t close the qemu completely and exit to host console with Laverne build 20110121||3||ACCE||||bruce.ashfield@windriver.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=684
|-
|-
| Enhance Automated QA Tests||Add tests for the RT pieces, consider run-time security checking tools used by Fedora and Gentoo||2||Review||||||1.2||
| gtk+ over directfb ||3||ACCE||||xiaofeng.yan@windriver.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1674
|-
|-
| Collect data at build time to increase accuracy of estimation (hob)||Collect data at build time to allow hob to: predict the size of the generated image, more accurately reflect the built image contents, etc. This will likely involve generating data on the autobuilder which the UI can fetch and consume (with local caching for offline usage)||2||Review||||||1.2||http://bugzilla.pokylinux.org/show_bug.cgi?id=1316
| make an lsb image to meet LSB requirement for version 1.2 ||2||ACCE||||xiaofeng.yan@windriver.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1675
|-
|-
| Finish and enable PR server||We\'re still seeing people being forced to cleansstate too often, we need to finish up and enable the PR server so the checksummed sstate future can live||2||Review||||||1.2||http://thread.gmane.org/gmane.comp.handhelds.openembedded.core/1272/focus=1357 http://thread.gmane.org/gmane.comp.handhelds.openembedded.core/835/focus=852
| A scripts to clean obsolote sstate cache files ||3||NEW||||liezhi.yang@windriver.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1682
|-
|-
| Provide a click through license mechanism||Implement the mechanism described in Section 1.2. BSP \'Click-Through\' Licensing Procedure in the BSP Developer\'s Guide||2||Review||Tom||Tom||1.2||
| bitbake-runtask doesn't work in both 1.0.1 and 1.1 ||2||NEW||||liezhi.yang@windriver.com||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1229
|-
|-
| Finish Oracle/Sun Hotspot JDK/JRE support||I created an initial hack of a recipe for this for the demo - finish it up (involves licensing issues (click-through license support would be a prerequisite) as well)||2||Review||Tom||Tom||1.2||50% done already
|-
| BSPs or layers for a specific category of devices || This will demonstrate the value of Yocto to developers and help them get up to speed quicker for this category of devices. ||2||Review||Dirk/Dave/Andy||TBD||1.2||
|-
| Parallel Locale Generation ||||2||Review||RP||||||http://bugzilla.yoctoproject.org/show_bug.cgi?id=1554
|}
|}

Latest revision as of 16:14, 16 December 2011

Potential Yocto Project 1.2 Features

Yocto Project 1.2 - Target release = April 2012

Yocto Project 1.2 Themes

The topics below are the themes that some members of the team have started brainstorming for Yocto Project v1.2. These will be improved with community input.

Yocto Project 1.2 Objectives

The objectives of the Yocto 1.2 release are to increase adoption of the Yocto Project.

Yocto Project 1.2 Theme List

The Yocto Project 1.2 Themes towards the Objectives listed above are:

  • Improved usability of the build system for new experienced users, new novice users and existing users.

Process for Entering New Feature Requests

  • Open a bug in the Yocto bugzilla setting the type of bug to be an "enhancement" request. The detail about the request should be included in the bugzilla report.
  • Create a new entry in the appropriate feature table below (Poky, SDK, Hardware)
    • Suggestion: start by copying an existing request as a template
  • Give the feature a short, descriptive name
  • Set the priority as appropriate (see the legend below)
  • Set the Status to "Review"
  • In the Source field, enter your name along with the origination of the request (e.g. OSV, OEM, Community) if applicable; provide as much detail here as you can
  • In the Comments / Bugzilla field, provide any additional information for the request includind a link to a bugzilla entry
  • Preview your Entry to make sure it looks ok and then save it

Legend

Priority: 1 = Must have, 2 = Nice to have but wouldn't block a release, 3 = Lower priority, desired, defined plan, 4 = Worthwhile ideas, no defined plan

Status: Accept = Engineering agreement to include in release, Review = Under Review for Inclusion in this release, Reject = Will not be included in this release

Sample Table

This is a sample table to show how to submit features.

Feature Name Priority Status Source Comments / Bugzilla Links
Placeholder feature name 1, 2, 3 or 4 Review Name Comment + Link

Usability

Feature Name Priority Status Source Owner Comments / Bugzilla Links
Build Appliance: Pre-configured VM Build image built by Yocto 1 Review davest/tracey/RP Saul (PRC) http://bugzilla.yoctoproject.org/show_bug.cgi?id=1557
Hob improvements 1 Review davest/tracey/RP Joshua/Jessica http://bugzilla.yoctoproject.org/show_bug.cgi?id=1559
Hob v2 - Interface updates? 1 Review davest/tracey/RP Ke & PRC Team http://bugzilla.yoctoproject.org/show_bug.cgi?id=1588
Improve user experience under Windows 1 Review davest/tracey/RP Scott R. http://bugzilla.yoctoproject.org/show_bug.cgi?id=1586
Error Handling Improvements 1 Review Scott G http://bugzilla.yoctoproject.org/show_bug.cgi?id=1543
Firewall / Proxy handling in git 2 Review davest/tracey/RP http://bugzilla.yoctoproject.org/show_bug.cgi?id=1585

Core/Bitbake

Feature Name Priority Status Source Owner Due Comments / Bugzilla Links
Make BasicHash the default 1 Review RP Lianhao(Jessica/RP) 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1555
Address git fetcher mirror issues 2 Review RP Richard 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1511
Recipe specific configuration (e.g. Gstreamer) 2 Resolved Richard / Resolved 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=923
Finish and enable PR server 2 Review Lianhao Lianhao 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1126
Host intrusion prevention/Swabber 2 Review Joshua Joshua 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1582
Yocto OOPS-type messages 2.5 Review LCS Paul to Investigate for 1.3 Feature 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1562
Recipe-specific sysroot 3 Review from 1.0 Dongxiao 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1560
Handle old versions in WORKDIR 3 Review from 1.0 Kai (WR) 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1561
Ability to build SRPM 3 Review RP Notes Jeff Polk/Mark 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1591
Binary package install class 3 Review Kai (WR) 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1592
Disk space monitoring 3 Review RP and Robert Robert (WR) 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1589
Ability to archive work dir 3 Review LCS Wenzong (WR) 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1590
Support for remote layers 3 Review Community Paul 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1598
Build Appliance: Pre-configured VM Build image (desktop Linux OS) 4 Review LCS 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1558
Depexp functionality without X 4 Review Joshua 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1658

QA Items

Feature Name Priority Status Source Owner Due Comments / Bugzilla Links
Package History 1 Review RP Paul 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1565
Package History Analysis Tool 1 Review RP Paul 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1566
QA Tests: Add recipe for LSB Tests and automate test 2 Review Yizhao 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1567
QA Tests: Add recipe for posix Tests and automate test 2 Review Jiajun 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1568
Open Source Test Cases 2 Review QA Jiajun (Song) 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1595
Collect data at build time to increase accuracy of estimation (hob) 2 Resolved Paul / Closed 1.2 Is this really Package History Now? http://bugzilla.yoctoproject.org/show_bug.cgi?id=1316
QA Tests: Add recipe for rt Tests and automate test 3 Review 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1569
QA Test improvements - consider fedora/gentoo runtime security tools 3 Review Joshua Jiajun 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1584
Automate BSP Testing 4 Review Tom 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1596
Test framework 4 Review RP Notes 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1594

Core Meta Data

Feature Name Priority Status Source Owner Due Comments / Bugzilla Links
build statistics reporting 2 Review eflanagan Beth 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1612
Sanity checks on per recipe basis 2 Review RP Notes Scott G 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=405
Package Documentation Audit: All recipes build 2 Team Scott G 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1619
Parallel Locale Generation 2 Done RP RP - Resolved 1.2 Resolved? http://bugzilla.yoctoproject.org/show_bug.cgi?id=1554
Clean up warning messages 2 Review Saul 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1544
Multilib: Enhance gcc recipe to support multilibs 2 Review RP Nitin 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1549
Multilib: Complete recipe enablement 2 Review RP Dongxiao 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1563
Multilib: Drop MULTILIB_IMAGE_INSTALL 2 Review RP Dongxiao 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1564
Multilib: Document 2 Review RP Scott R 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1622
MeeGo GPLv2 Sync 2 Review RP Notes Saul 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1618
Finish Oracle/Sun Hotspot JDK/JRE support 2 Review Tom Nitin/Tom 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1620
Running post installs at rootfs gen time 2 Review RP Notes Dexuan 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1621
Fix Runtime POSIX Issue 2 Review Team Kai 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1623
License file cleanup 2 Review Beth Beth 1.2 1 week http://bugzilla.yoctoproject.org/show_bug.cgi?id=1547
QEMU GL Enhancements 2 Review Meta-data Edwin 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1624
Init Selection as Distro Feature 2 Review Joshua Joshua w/Kai 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1625
Document multiple library versions co-existing 3 Review Team Scott R 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1548
Enhance TARGET_VENDOR field support 3 Review RP Ke 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1550
selinux patch integration 3 Review Meta-data ScottG w/WR 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1609
gtk+ sato filechooser patch 3 Review RP Notes Xiaofeng/Joshua 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1615
Investigate New UI 4 Review Meta-data Paul 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1606
Implement Factory reset 4 Review Joshua Joshua 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1593
Embedded java environment or even JDK support 4 Review Team Saul 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1613

Other Layer Meta Data

Feature Name Priority Status Source Owner Due Comments / Bugzilla Links
x32 Enhancements 2 Review Nitin 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1579
BSPs or layers for a specific category of devices 2 Review Dirk/Dave/Andy Shane 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1626
Security layer 4 Review Joshua 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1597

Infrastructure

Feature Name Description Priority Status Source Owner Due Comments / Bugzilla Links
autobuilder layer support need detail 2 Review Beth Beth 1.2 2 weeks, http://bugzilla.yoctoproject.org/show_bug.cgi?id=1628
buildstats memory measurements need detail 2 Review Beth Beth 1.2 1 week and half, http://bugzilla.yoctoproject.org/show_bug.cgi?id=1629
autobuilder clean sstate option 2 Review Beth Beth 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1627
Eval Patch management tools 3 Review RP Notes 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1632
Bugzilla to Wiki 2.5 Review Darren 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1631
Provide a click through license mechanism 2 Review Tom Tom 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1630

BSPs

Feature Name Description Priority Status Source Owner Due Comments / Bugzilla Links
Improve device management [Need plan from Joshua] 2 Review Joshua/Darren 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1608
BSP update/intro 2 Review Bruce/Richard/team Bruce 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1634
Drop Grub for Syslinux 2 Review Darren Darren 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1635
Upgrade to EFI 2 Review Darren Darren 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1636
replace qemuppc 2 Review Bruce 1.2 http://bugzilla.pokylinux.org/show_bug.cgi?id=1638
streamline meta-intel kernel config options 2 Review Tom Tom 1.2 http://bugzilla.pokylinux.org/show_bug.cgi?id=1661
add crownbay video acceleration 2 Review Tom Tom 1.2 http://bugzilla.pokylinux.org/show_bug.cgi?id=1660

ADT / Tools and Support

Feature Name Description Priority Status Source Owner Due Comments / Bugzilla Links
Enhance the deploy part in remote debug 3 Review Lianhao Jessica 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1600
Secure login 3 Review ADT Team Jessica 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1601
Linux tools upstream integration 3 Review ADT Team Jessica 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1602
Add recipe supporting autoconf-nativesdk and automake-nativesdk 2 Review Lianhao Kai/Lianhao 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1603
Eclipse BSP/Kernel Plugin This one is Jessica's, Tom's tracked elsewhere 2 Review Darren Jessica 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1610
enhance the bitbake commander eclipse plugin 2 Review Dongxiao/Lianhao Jessica/Lianhao 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1611
Tracing: tuna, oscilloscope recipes Need detail 3 Review from 1.0 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1639
Tracing/profiling HOWTOs 2 Review Tom Tom 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1640
Profiling: Valgrind tools in Eclipse 2 Review Dave/JZ Jessica 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1580
Tracing: Systemtap usability in Yocto 2 Review Tom Tom 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1551
Tracing: create separate recipe for perf 2 Review Tom Tom 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1552
Tracing: perf trace scripting support 2 Review from 1.0 Tom 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1553
'perf scripts' integration Can Jessica own this own after stap (1551) is done? 2 Review Tom Jessica/Tom 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1617

Documentation

Feature Name Description Priority Status Source Owner Due Comments / Bugzilla Links
Various Demo Videos 2 Review From ADT module and scratch ScottR 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1641

Kernel

Feature Name Description Priority Status Source Owner Due Comments / Bugzilla Links
Minimal Image Config Infrastructure 3 Review Team WR Distro Team??? / Darren 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1642
Kernel Tools need detail 2 Review Bruce/Mark Bruce 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1643
use cases need detail 1 Review Bruce Bruce 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1644
kernel bloat - development need detail 2 Review Darren Darren 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1645
Fast boot time need detail 2 Review Team Darren 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1646
Upstream config fragments 2 Review Darren 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1647
Real-time process-executed timers 2 Review Darren 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1648
Define Kernel policy 2 Review Darren 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1649
Target module build 3 Review RP Notes Darren 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1614
linux-yocto-dev lock 1 Review Bruce Bruce 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1679
linux-yocto-dev stable update 2 Review Bruce Bruce 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1680
Kernel usability scripts 2 Review Tom Tom 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1678

Unsorted

Feature Name Priority Status Source Owner Due Comments / Bugzilla Links
Way to determine what is about to happen (similar to a dry-run) 1 Review WR http://bugzilla.yoctoproject.org/show_bug.cgi?id=1659
debuginfo export 2 Review WR http://bugzilla.yoctoproject.org/show_bug.cgi?id=1657
Recipe creation/import script 2 Review WR Kai (WR) M2? http://bugzilla.yoctoproject.org/show_bug.cgi?id=1656
Export source package 3 Review WR Xiaofeng(WR) ? http://bugzilla.yoctoproject.org/show_bug.cgi?id=1655
Layer tooling: Tool to combine layers 2 Review WR http://bugzilla.yoctoproject.org/show_bug.cgi?id=1654
Recipe patch tooling/workflow 2 Review WR http://bugzilla.yoctoproject.org/show_bug.cgi?id=1652
Incremental image generation 2 Review WR Robert (WR) M2? http://bugzilla.yoctoproject.org/show_bug.cgi?id=1651
Need documentation on contributing patches and code 1 Review WR http://bugzilla.yoctoproject.org/show_bug.cgi?id=1650
rebuild udev cache if the kernel version changes 2 ACCE tong.lin@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1147
Unpackaged files WARNING 2 NEW song.liu@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1545
Handled Releases with the PR server 2 NEW song.liu@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1556
Buildstats memory measurements 3 NEW song.liu@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1605
Use the per-file dependencies in deb and ipkg packages 2 NEW song.liu@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1662
Document invalidation of the sstate on a per class basis 3 ACCE scott.m.rifenbark@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1500
New santiy check for userspace packages 3 ACCE scott.a.garman@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1008
bitbake -b prints meaningless error when given an invalid recipe name 1 ACCE scott.a.garman@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1141
Remove python stack trace when do_patch fails 1 ACCE scott.a.garman@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1143
Need to change numeric user/groupids to names in device_table-minimal.txt 2 ACCE scott.a.garman@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1159
Make bitbake output less noisy for non-error cases 2 NEW scott.a.garman@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1145
QEMU won\'t run on a system that does not support tunctl 2 NEW scott.a.garman@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1474
Display a summary of warnings and errors at the end of a bitbake command 1 NEW scott.a.garman@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1540
Create better interface for metrics and status gathering 2 ACCE saul.wold@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=205
Improve syslog configurability 2 NEW saul.wold@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=717
Allow logrotate to use a different file system from the original logs 3 NEW saul.wold@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=718
qemu: when booting from live CD, X cannot be started 2 NEW saul.wold@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1487
Convert meta-toolchain to work as a poky install composed of staging/prebuild packages 3 ACCE richard.purdie@linuxfoundation.org http://bugzilla.yoctoproject.org/show_bug.cgi?id=115
Qemu booting cost more time 3 ACCE richard.purdie@linuxfoundation.org http://bugzilla.yoctoproject.org/show_bug.cgi?id=646
Enable swabber to be run for only specific recipes 3 ACCE richard.purdie@linuxfoundation.org http://bugzilla.yoctoproject.org/show_bug.cgi?id=822
RRECOMMENDS...-dbg causes dependency failure if no ${PN} package exists 3 ACCE richard.purdie@linuxfoundation.org http://bugzilla.yoctoproject.org/show_bug.cgi?id=824
Specify paths searched when failing to find a SRC_URI 2 ACCE richard.purdie@linuxfoundation.org http://bugzilla.yoctoproject.org/show_bug.cgi?id=1179
Drop PKGSUFFIX and have nativesdk use multilib technology 3 ACCE richard.purdie@linuxfoundation.org http://bugzilla.yoctoproject.org/show_bug.cgi?id=1508
Set default gcc-cross-canadian instruction generation to TARGET_ARCH 3 ACCE nitin.a.kamble@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=139
Zypper: Package dependency resolution does not know about hinting 3 NEED mark.hatle@windriver.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=821
Consider using PatchELF rather than chrpath for modifying the RPATH 3 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=806
Ensure Poky can be run on non-Linux Unices 4 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=823
Add build progress indicator 3 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1221
Should be easier to find and remove packages 3 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1241
Add more detailed data to the models used for hob state 3 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1293
Allow customize the dev packages when building a toolchain 3 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1303
Enable removal of packages 3 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1450
report on artifacts after image generation 3 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1572
make it clear how to run saved hob recipes from command line 3 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1573
add additional dialogs/config for u-boot/kernel 3 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1574
configure runtime services from gui 3 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1575
configure network settings from hob gui 3 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1576
configure users and default passwords from hob gui 3 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1577
Enable customisation of image drop down 3 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1581
Provide interface for user the install Yocto SDK through IDE 3 ACCE jessica.zhang@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=191
native packages should use siteinfo files 3 ACCE jeff.polk@windriver.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=270
[AutoBuilder/FEAT] Set Bug to Fixed automatically when building in AutoBuilder 3 REOP elizabeth.flanagan@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=874
Put a uname and ab name in stdio 2 ACCE elizabeth.flanagan@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1461
License file WARNING messages 2 ACCE elizabeth.flanagan@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1546
Autobuilder Layer support 2 ACCE elizabeth.flanagan@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1604
autobuilder clean sstate checkbox 3 ACCE elizabeth.flanagan@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1607
Close button doesn\'t obey Fitt\'s Law 3 ACCE edwin.zhai@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=35
sato-icon-theme lacks generic / unknown icon 3 ACCE edwin.zhai@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=37
I/O schedule isn\'t no-op on flash based devices 3 NEED dvhart@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=66
Create a power users tips and tricks document 3 ACCE dvhart@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1033
Support \'~\' in version strings 3 Wait dongxiao.xu@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=256
Pull alsa-state into oe-core (from oe) 2 ACCE dongxiao.xu@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1176
kernel: support standalone kernel builds 2 ACCE bruce.ashfield@windriver.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=843
mpc8315\'s tune file: \"tune-ppc603e.inc\" 3 ACCE bruce.ashfield@windriver.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1192
[multilib] Triggering building a 64 bit kernel with a 32 bit userspace 3 ACCE song.liu@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1525
Yocto website should include a glossary 2 NEED scott.m.rifenbark@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=557
Yocto project website should include a simplified walk-through 3 NEED scott.m.rifenbark@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=558
Bug reporting guide 2 ACCE scott.m.rifenbark@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=237
Improve SDK sysroot extensibility and workflow 3 ACCE scott.m.rifenbark@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=545
add documentation for swabber 3 ACCE scott.m.rifenbark@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=635
need a doc for qemu usage 3 ACCE scott.m.rifenbark@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=641
QEMU fails to launch using unfs with rpcbind installed - must have portmap. 2 ACCE scott.m.rifenbark@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=655- maybe resolved?
Need centralized documentation on BitBake class usage 2 ACCE scott.m.rifenbark@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1467
bitbake \"NoProvider\" message doesn\'t aid in resolving the problem 2 ACCE scott.a.garman@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=542
Improve the error reporting when SkipPackage error is raised 2 ACCE scott.a.garman@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1127
sstate code doesn\'t detect overwriting files 3 ACCE richard.purdie@linuxfoundation.org http://bugzilla.yoctoproject.org/show_bug.cgi?id=238
Add a mechanism to do pre-build sanity based on specific configurations 3 ACCE richard.purdie@linuxfoundation.org http://bugzilla.yoctoproject.org/show_bug.cgi?id=405
Usability: How to find specific variables and settings? 2 ACCE richard.purdie@linuxfoundation.org http://bugzilla.yoctoproject.org/show_bug.cgi?id=407
TCF RSE plug-in not handle the situation if the remote agent does NOT support terminal service 3 Wait liping.ke@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=107
cdt.launch.remote issues on a non-canonical terminal 3 Wait liping.ke@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=188
Need a generic xorg.conf package that all the xservers can use. 3 ACCE ke.yu@intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1175
Show contents of images & tasks 2 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=991
Show more information about packages 3 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=992
Preference Package Format only support one selection at a time 3 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1272
Need guidance choosing \'Base image\' 2 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1277
Built toolchain doesn\'t include development packages for image 2 NEW josh@linux.intel.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1302
On qemuarm, the command \'poweroff/shutdown\' can\'t close the qemu completely and exit to host console with Laverne build 20110121 3 ACCE bruce.ashfield@windriver.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=684
gtk+ over directfb 3 ACCE xiaofeng.yan@windriver.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1674
make an lsb image to meet LSB requirement for version 1.2 2 ACCE xiaofeng.yan@windriver.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1675
A scripts to clean obsolote sstate cache files 3 NEW liezhi.yang@windriver.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1682
bitbake-runtask doesn't work in both 1.0.1 and 1.1 2 NEW liezhi.yang@windriver.com http://bugzilla.yoctoproject.org/show_bug.cgi?id=1229
Retrieved from "https://wiki.yoctoproject.org/wiki/index.php?title=Yocto_1.2_Features&oldid=4307"