Beaglebone-ltp: Difference between revisions

Latest revision as of 03:09, 9 April 2020

3.1 RC2 build

total: 7

LTP cases	status	error msg	comment	bugzilla
msgstress03	NAB	msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
settimeofday01		TBROK : tst_sig.c:232: unexpected signal SIGSEGV(11) received (pid = 11642).
settimeofday02		TBROK : tst_sig.c:232: unexpected signal SIGSEGV(11) received (pid = 11643).
perf_event_open01		TFAIL : perf_event_open01.c:158: perf_event_open PERF_COUNT_HW_INSTRUCTIONS failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument
copy_file_range02		FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EFBIG (27)
vma05	LTP	TFAIL: [vdso] bug not patched	https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html
unshare01_sh	NAB	unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

3.0 RC2 build

total: 5

LTP cases	status	error msg	comment	bugzilla
msgstress03	NAB	msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
perf_event_open01		TFAIL : perf_event_open01.c:158: perf_event_open PERF_COUNT_HW_INSTRUCTIONS failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument
vma05	LTP	TFAIL: [vdso] bug not patched	https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html
unshare01_sh	NAB	unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.7 RC2 build

total: 6

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
msgstress03	NAB	msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
vma05	LTP	TFAIL: [vdso] bug not patched	https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html
file01_sh	LTP	file01 10 TFAIL: in: was not recognized	Need to update the case since the file command had been upgraded.
unshare01_sh	NAB	unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.7 M3 RC1 build

total: 6

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
msgstress03	NAB	msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
vma05	LTP	TFAIL: [vdso] bug not patched	https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html
file01_sh	LTP	file01 10 TFAIL: in: was not recognized	Need to update the case since the file command had been upgraded.
unshare01_sh	NAB	unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.7 M2 RC1 build

total: 8

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
inotify09	NEW	tst_test.c:1072: INFO: Timeout per run is 0h 05m 00s Test timeouted, sending SIGKILL!
msgstress03	NAB	msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
vma05		TFAIL: [vdso] bug not patched
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01	NAB	ld01 3 TFAIL: Failed to build shared library	file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug.

2.7 M1 RC1 build

total: 8

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
inotify09	NEW	tst_test.c:1072: INFO: Timeout per run is 0h 05m 00s Test timeouted, sending SIGKILL!
msgstress03	NAB	msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
vma05		TFAIL: [vdso] bug not patched
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01	NAB	ld01 3 TFAIL: Failed to build shared library	file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug.

2.6 RC1 build

total: 9

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
fs_fill	NEW	Test timeouted, sending SIGKILL! tst_test.c:1055: INFO: If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1 tst_test.c:1056: BROK: Test killed! (timeout?)	If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled	KSM configuration is not enabled
vma05		TFAIL: [vdso] bug not patched
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01	NAB	ld01 3 TFAIL: Failed to build shared library	file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug.

2.6 M3 RC1 build

total: 10

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
sigwaitinfo01	LTP	sigwaitinfo01 7 TFAIL : sigwaitinfo01.c:386: Unrecognised child exit code	LTP fixed in commit 4926a47b538060e07bf7a7d36dec5a0c07b7ce9b
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled	KSM configuration is not enabled
vma05		TFAIL: [vdso] bug not patched
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01	NAB	ld01 3 TFAIL: Failed to build shared library	file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug.
unshare01	NAB	TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.6 M2 RC1 build

total: 9

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled	KSM configuration is not enabled
vma05	NEW	TFAIL: [vdso] bug not patched
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01	NAB	ld01 3 TFAIL: Failed to build shared library	file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug.
unshare01	NAB	TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.6 M1 RC1 build

total: 10

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
fs_fill	NEW	tst_test.c:1056: BROK: Test killed! (timeout?)	tst_test.c:1055: INFO: If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled	KSM configuration is not enabled
vma05	NEW	TFAIL: [vdso] bug not patched
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01	NEW	ld01 1 TBROK: gcc -fPIC -c -o rf1.o /opt/ltp/testcases/data/ld01/rf1.c failed	cc1: error: -mfloat-abi=hard: selected processor lacks an FPU. See bug https://bugzilla.yoctoproject.org/show_bug.cgi?id=12795
unshare01	NAB	TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.5 RC1 build

total: 12

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
perf_event_open02	LTP	perf_event_open02 1 TFAIL : perf_event_open02.c:333: test failed (ratio was greater than )	It's more likely to happen under heavy CPU load. See bug report: https://bugs.linaro.org/show_bug.cgi?id=3382
ksm03	NAB	ksm03.c:71: CONF: KSM configuration is not enabled	KSM configuration is not enabled
ksm03_1	NAB	ksm03.c:71: CONF: KSM configuration is not enabled	KSM configuration is not enabled
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled	KSM configuration is not enabled
vma05	NEW	TFAIL: [vdso] bug not patched
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
unshare01	NAB	TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.5 M3 RC1 build

total: 12

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
keyctl06	NAB	keyctl06.c:68: FAIL: KEYCTL_READ returned 4 but expected 8	This case is for regression test for kernel commits e645016abc80 and 3239b6f29bdf which were introduced by kernel 4.14. It would fail on 4.12 kernel.
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
perf_event_open02	LTP	perf_event_open02 1 TFAIL : perf_event_open02.c:333: test failed (ratio was greater than )	It's more likely to happen under heavy CPU load. See bug report: https://bugs.linaro.org/show_bug.cgi?id=3382
ksm03	NAB	ksm03.c:71: CONF: KSM configuration is not enabled	KSM configuration is not enabled
ksm03_1	NAB	ksm03.c:71: CONF: KSM configuration is not enabled	KSM configuration is not enabled
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled	KSM configuration is not enabled
vma05	NEW	TFAIL: [vdso] bug not patched
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
unshare01	NAB	TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.5 M2 RC1 build

total: 12

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
fanotify06	LTP	tst_test.c:1025: BROK: Test killed by SIGSEGV!	LTP bug. Upstream had fixed it.
keyctl06	NAB	keyctl06.c:68: FAIL: KEYCTL_READ returned 4 but expected 8	This case is for regression test for kernel commits e645016abc80 and 3239b6f29bdf which were introduced by kernel 4.14. It would fail on 4.12 kernel.
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.	Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
perf_event_open02	LTP	perf_event_open02 1 TFAIL : perf_event_open02.c:333: test failed (ratio was greater than )	It's more likely to happen under heavy CPU load. See bug report: https://bugs.linaro.org/show_bug.cgi?id=3382
ksm03	NAB	ksm03.c:71: CONF: KSM configuration is not enabled	KSM configuration is not enabled
ksm03_1	NAB	ksm03.c:71: CONF: KSM configuration is not enabled	KSM configuration is not enabled
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled	KSM configuration is not enabled
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
unshare01	NAB	TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info	The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared". For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593 To make it pass on Poky with sysvinit, run the following command before run the test case: mount --make-shared / cat /proc/self/mountinfo \| grep shared 15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.5 M1 RC3 build

total: 12

LTP cases	status	error msg	comment	bugzilla
add_key03		add_key03.c:86: FAIL: created user keyring for another user
fsync02		fsync02 1 TFAIL : fsync02.c:137: fsync took too long: 185.000000 seconds; max_block: 146029; data_blocks: 384
getrusage03	NAB	getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
keyctl06		keyctl06.c:50: FAIL: KEYCTL_READ overran the buffer
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled.	quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
perf_event_open02		perf_event_open02 1 TFAIL : perf_event_open02.c:333: test failed (ratio was greater than )
ksm03	NAB	ksm03.c:71: CONF: KSM configuration is not enabled
ksm03_1	NAB	ksm03.c:71: CONF: KSM configuration is not enabled
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.

2.5 M1 RC1 build

total: 15

LTP cases	status	error msg	comment	bugzilla
add_key03	NEW	add_key03.c:86: FAIL: created user keyring for another user
fsync02		fsync02 1 TFAIL : fsync02.c:137: fsync took too long: 185.000000 seconds; max_block: 146029; data_blocks: 384
getrusage03	NAB	getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
keyctl06	NEW	keyctl06.c:50: FAIL: KEYCTL_READ overran the buffer
msgctl10	NAB	msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled.	quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
perf_event_open02		perf_event_open02 1 TFAIL : perf_event_open02.c:333: test failed (ratio was greater than )
ksm03	NAB	ksm03.c:71: CONF: KSM configuration is not enabled
ksm03_1	NAB	ksm03.c:71: CONF: KSM configuration is not enabled
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled
su01	LTP	YOU NEED TO SET ENVIROMENT VARIABLE PASSWD.	The ltp test script has issue.
cron_allow01	LTP	(2) TEST THAT PERSON NOT IN /var/spool/cron/allow IS NOT ABLE TO RUN JOB. Cron allowed user to execute test job, TEST FAILED	The test case specifies /var/spool/cron/allow and /var/spool/cron/deny as the default configure, but in Yocto, we use /etc/cron.allow and /etc/cron.deny. Modify the test script before testing.
cron_dirs_checks01	NAB	FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!!	The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ar		ar: `u' modifier ignored since `D' is the default (see `U') 14 TFAIL: ar haven't updated modified file0 (-u)	Already sent a patch to oe
tar01		tar: invalid option -- 'd' 1 TFAIL: tar dvf test.tar > tar.out failed unexpectedly	Busybox tar doesn't have 'd' option. Need to install tar package

2.4 RC3 build

total: 18

LTP cases	status	error msg	comment	bugzilla
fsync02	NEW	fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 151.000000 seconds; max_block: 120247; data_blocks: 384
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled.	quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).	Upstream have already remove the corresponding case: https://github.com/linux-test-project/ltp/commit/259db6fed55f88ab32a0875e66803eee44d298be
shmat01	LTP	shmat01.c:118: FAIL: shared memory address was not correct	LTP had a fix in master
perf_event_open02		perf_event_open02 1 TFAIL : perf_event_open02.c:333: test failed (ratio was greater than )
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
ksm03	NAB	ksm03.c:71: CONF: KSM configuration is not enabled
ksm03_1	NAB	ksm03.c:71: CONF: KSM configuration is not enabled
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled
thp01	LTP	tst_test.c:908: INFO: Timeout per run is 0h 05m 00s execvp: Argument list too long	LTP had a fix for this issue in master
su01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01		cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
tar01		tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly	Busybox tar has different behavior

2.4 RC2 build

total: 17

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled.	quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).	Upstream have already remove the corresponding case: https://github.com/linux-test-project/ltp/commit/259db6fed55f88ab32a0875e66803eee44d298be
shmat01	LTP	shmat01.c:118: FAIL: shared memory address was not correct	LTP had a fix in master
perf_event_open02		perf_event_open02 1 TFAIL : perf_event_open02.c:333: test failed (ratio was greater than )
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
ksm03	NAB	ksm03.c:71: CONF: KSM configuration is not enabled
ksm03_1	NAB	ksm03.c:71: CONF: KSM configuration is not enabled
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled
thp01	LTP	tst_test.c:908: INFO: Timeout per run is 0h 05m 00s execvp: Argument list too long	LTP had a fix for this issue in master
su01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01		cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
tar01		tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly	Busybox tar has different behavior

2.4 RC1 build

total: 18

LTP cases	status	error msg	comment	bugzilla
fsync02	NEW	fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 170.000000 seconds; max_block: 138951; data_blocks: 384
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled.	quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).	Upstream have already remove the corresponding case: https://github.com/linux-test-project/ltp/commit/259db6fed55f88ab32a0875e66803eee44d298be
shmat01	LTP	shmat01.c:118: FAIL: shared memory address was not correct	LTP had a fix in master
perf_event_open02		perf_event_open02 1 TFAIL : perf_event_open02.c:333: test failed (ratio was greater than )
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
ksm03	NAB	ksm03.c:71: CONF: KSM configuration is not enabled
ksm03_1	NAB	ksm03.c:71: CONF: KSM configuration is not enabled
ksm05	NAB	ksm05.c:98: CONF: KSM configuration is not enabled
thp01	LTP	tst_test.c:908: INFO: Timeout per run is 0h 05m 00s execvp: Argument list too long	LTP had a fix for this issue in master
su01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01		cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
tar01		tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly	Busybox tar has different behavior

2.4 M2 RC3 build

total: 15

LTP cases	status	error msg	comment	bugzilla
add_key02		add_key02.c:98: FAIL: unexpected error with key type 'user': EINVAL
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled.	quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).	Upstream have already remove the corresponding case: https://github.com/linux-test-project/ltp/commit/259db6fed55f88ab32a0875e66803eee44d298be
perf_event_open02		perf_event_open02 1 TFAIL : perf_event_open02.c:333: test failed (ratio was greater than )
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
su01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01		cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
file01		file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory)
tar01		tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly	Busybox tar has different behavior

2.3 RC2 build

total: 17

LTP cases	status	error msg	comment	bugzilla
faccessat01		faccessat01 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15279).
fchmodat01		fchmodat01 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15306).
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled.	quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).
utimensat01		utimensat01 55 TFAIL : FAILED test 55
perf_event_open02		perf_event_open02 1 TFAIL : perf_event_open02.c:333: test failed (ratio was greater than )
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
su01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01		cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
file01		file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory)
tar01		tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly	Busybox tar has different behavior

2.3 M3 RC2 build

total: 18

LTP cases	status	error msg	comment	bugzilla
faccessat01	NEW	faccessat01 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15279).
fchmodat01	NEW	fchmodat01 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15306).
fsync02	NAB	fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 264.000000 seconds; max_block: 214375; data_blocks: 384
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
quotactl01	NAB	quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled.	quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).
utimensat01		utimensat01 55 TFAIL : FAILED test 55
perf_event_open02		perf_event_open02 1 TFAIL : perf_event_open02.c:333: test failed (ratio was greater than )
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
su01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar		ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01	NEW	cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
file01		file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory)
tar01		tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly	Busybox tar has different behavior

2.3 M2 RC3 build

total: 31

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
pwritev01_64		pwritev01 3 TFAIL : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202		renameat202 1 TFAIL : renameat202.c:161: renameat2() didn't swap the content of the two files
setrlimit02		setrlimit02 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).
utimensat01		utimensat01 55 TFAIL : FAILED test 55
writev01		writev01 4 TFAIL : writev01.c:204: writev failed unexpectedly: errno=EFAULT(14): Bad address
writev03		writev03 1 TFAIL : writev03.c:145: Got EFAULT
writev04		writev04 1 TFAIL : writev04.c:164: Got error EFAULT
perf_event_open01	NAB	perf_event_open01 1 TFAIL : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported	System doesn't support
perf_event_open02		perf_event_open02 1 TFAIL : perf_event_open02.c:333: test failed (ratio was greater than )
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
su01	qemux86
cron02	qemux86
cron_allow01	qemux86
cron_deny01	qemux86
cron_dirs_checks01	qemux86
ar		FAIL - ar with -u flag failed
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01		unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86
which01		which01 1 TFAIL : 'which pname' failed, not expected.

2.3 M1 RC1 build

total: 31

LTP cases	status	error msg	comment	bugzilla
fsync02		fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 263.000000 seconds; max_block: 214375; data_blocks: 384	Micro SD card is slow
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
pwritev01_64		pwritev01 3 TFAIL : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202		renameat202 1 TFAIL : renameat202.c:161: renameat2() didn't swap the content of the two files
utimensat01		utimensat01 55 TFAIL : FAILED test 55
writev01		writev01 4 TFAIL : writev01.c:204: writev failed unexpectedly: errno=EFAULT(14): Bad address
writev03		writev03 1 TFAIL : writev03.c:145: Got EFAULT
writev04		writev04 1 TFAIL : writev04.c:164: Got error EFAULT
perf_event_open01	NAB	perf_event_open01 1 TFAIL : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported	System doesn't support
perf_event_open01		perf_event_open02 1 TFAIL : perf_event_open02.c:333: test failed (ratio was greater than )
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
su01	qemux86
cron02	qemux86
cron_allow01	qemux86
cron_deny01	qemux86
cron_dirs_checks01	qemux86
ar		FAIL - ar with -u flag failed
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01		unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86
which01		which01 1 TFAIL : 'which pname' failed, not expected.

2.2 RC4 build

total: 31

LTP cases	status	error msg	comment	bugzilla
fsync02		fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 263.000000 seconds; max_block: 214375; data_blocks: 384	Micro SD card is slow
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
pwritev01_64		pwritev01 3 TFAIL : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202		renameat202 1 TFAIL : renameat202.c:161: renameat2() didn't swap the content of the two files
utimensat01		utimensat01 55 TFAIL : FAILED test 55
writev01		writev01 4 TFAIL : writev01.c:204: writev failed unexpectedly: errno=EFAULT(14): Bad address
writev03		writev03 1 TFAIL : writev03.c:145: Got EFAULT
writev04		writev04 1 TFAIL : writev04.c:164: Got error EFAULT
perf_event_open01	NAB	perf_event_open01 1 TFAIL : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported	System doesn't support
perf_event_open01		perf_event_open02 1 TFAIL : perf_event_open02.c:333: test failed (ratio was greater than )
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
su01	qemux86
cron02	qemux86
cron_allow01	qemux86
cron_deny01	qemux86
cron_dirs_checks01	qemux86
ar		FAIL - ar with -u flag failed
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01		unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86
which01		which01 1 TFAIL : 'which pname' failed, not expected.

2.2 M3 RC1 build

total: 26

LTP cases	status	error msg	comment	bugzilla
fsync02		fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 263.000000 seconds; max_block: 214375; data_blocks: 384	Micro SD card is slow
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
pwritev01_64		pwritev01 3 TFAIL : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202		renameat202 1 TFAIL : renameat202.c:161: renameat2() didn't swap the content of the two files
perf_event_open01	NAB	perf_event_open01 1 TFAIL : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported	System doesn't support
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
su01	qemux86
cron02	qemux86
cron_allow01	qemux86
cron_deny01	qemux86
cron_dirs_checks01	qemux86
ar		FAIL - ar with -u flag failed
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01		unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86
which01		which01 1 TFAIL : 'which pname' failed, not expected.

2.2 M2 RC1 build

total: 36

LTP cases	status	error msg	comment	bugzilla
chmod06		chmod06 0 TINFO : No free devices found
fsync02		fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 263.000000 seconds; max_block: 214375; data_blocks: 384	Micro SD card is slow
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
inotify03		inotify03 0 TINFO : No free devices found
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
pwritev01_64		pwritev01 3 TFAIL : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202		renameat202 1 TFAIL : renameat202.c:161: renameat2() didn't swap the content of the two files
perf_event_open01	NAB	perf_event_open01 1 TFAIL : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported	System doesn't support
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
su01	qemux86
cron02	qemux86
cron_allow01	qemux86
cron_deny01	qemux86
cron_dirs_checks01	qemux86
ar		FAIL - ar with -u flag failed
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01		unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86
df01_ext2		stat: invalid option -- '-'	stat from busybox is missing some options
df01_ext3		df01 1 TBROK : mkfs.ext3 /dev/loop0 failed
df01_ext4		stat: invalid option -- '-'	stat from busybox is missing some options
mkfs01		mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed
mkfs01_ext2		mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed.
mkfs01_ext3		mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed.
mkfs01_ext4		mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed.
mkfs01_minix		mkfs01 1 TFAIL : 'mkfs -t minix /dev/loop0 ' failed.
which01		which01 1 TFAIL : 'which pname' failed, not expected.

2.1 RC2 build

total: 35

LTP cases	status	error msg	comment	bugzilla
chmod06		chmod06 0 TINFO : No free devices found
fsync02		fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 263.000000 seconds; max_block: 214375; data_blocks: 384	Micro SD card is slow
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
ioctl03		ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
inotify03		inotify03 0 TINFO : No free devices found
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
msgctl10		msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
pwritev01_64		pwritev01 3 TFAIL : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202		renameat202 1 TFAIL : renameat202.c:161: renameat2() didn't swap the content of the two files
perf_event_open01	NAB	perf_event_open01 1 TFAIL : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported	System doesn't support
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
su01	qemux86
cron02	qemux86
cron_allow01	qemux86
cron_deny01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86
df01_ext2		stat: invalid option -- '-'	stat from busybox is missing some options
df01_ext3		df01 1 TBROK : mkfs.ext3 /dev/loop0 failed
df01_ext4		stat: invalid option -- '-'	stat from busybox is missing some options
mkfs01		mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed
mkfs01_ext2		mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed.
mkfs01_ext3		mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed.
mkfs01_ext4		mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed.
mkfs01_minix		mkfs01 1 TFAIL : 'mkfs -t minix /dev/loop0 ' failed.
which01		which01 1 TFAIL : 'which pname' failed, not expected.

2.0 RC3 build

total: 34

LTP cases	status	error msg	comment	bugzilla
fsync02	NEW	fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 250.000000 seconds; max_block: 214375; data_blocks: 384	Micro SD card error ?
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
msgctl10	NEW	msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
perf_event_open01	NAB	perf_event_open01 1 TFAIL : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported	System doesn't support
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
proc01	NEW	proc01 6 TFAIL : proc01.c:461: readproc() failed with 5 errors.
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

2.0 RC2 build

total: 34

LTP cases	status	error msg	comment	bugzilla
fsync02	NEW	fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 250.000000 seconds; max_block: 214375; data_blocks: 384	Micro SD card error ?
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
msgctl10	NEW	msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
perf_event_open01	NAB	perf_event_open01 1 TFAIL : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported	System doesn't support
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
proc01	NEW	proc01 6 TFAIL : proc01.c:461: readproc() failed with 5 errors.
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.9 M3 RC1 build

total: 33

LTP cases	status	error msg	comment	bugzilla
fsync02	NEW	fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 250.000000 seconds; max_block: 214375; data_blocks: 384	Micro SD card error ?
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
msgctl10	NEW	msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
perf_event_open01	NAB	perf_event_open01 1 TFAIL : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported	System doesn't support
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.9 M2 RC2 build

total: 33

LTP cases	status	error msg	comment	bugzilla
fsync02	NEW	fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 250.000000 seconds; max_block: 214375; data_blocks: 384	Micro SD card error ?
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
msgctl10	NEW	msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
perf_event_open01	NAB	perf_event_open01 1 TFAIL : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported	System doesn't support
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.9 M1 RC2 build

total: 33

LTP cases	status	error msg	comment	bugzilla
fsync02	NEW	fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 250.000000 seconds; max_block: 214375; data_blocks: 384	Micro SD card error ?
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
msgctl10	NEW	msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress)	May be OK if under stress
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
perf_event_open01	NAB	perf_event_open01 1 TFAIL : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported	System doesn't support
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.8 M4 RC2 build

total: 32

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
perf_event_open01	NAB	perf_event_open01 1 TFAIL : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported	System doesn't support
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/	No mkisofs command
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
ar	LTP	FAIL - ar with -u flag failed	LTP bug. Already fixed in upstream
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.8 M3 RC3 build

total: 32

LTP cases	status	error msg	comment	bugzilla
fsync02		fsync02 1 TFAIL : fsync02.c:139: fsync took too long: 248.000000 seconds; max_block: 214375; data_blocks: 384
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
perf_event_open01	NEW	perf_event_open01 1 TFAIL : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported
isofs	NAB	isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-B5fayzucuL/isofs.f37YbPkMAt/tmp//etc/	No mkisofs command
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.8 M1 RC1 build

total: 31

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
perf_event_open01	NEW	perf_event_open01 1 TFAIL : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported
isofs	NEW	isofs 1 TFAIL : tst_resm
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.7 M4 RC5 20141018 build

total: 29

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.7 M4 RC4 20141011 build

total: 29

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01	qemux86	unzip01 1 TFAIL : Test #1: unzip output differs from expected output.
gzip01	qemux86

1.7 M2 RC1 20140730 build

total: 31

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
setregid02	LTP	setregid02 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success
setregid02_16	LTP	setregid02_16 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01		sh: unzip_tests.sh: command not found
gzip01	qemux86

1.7 M1 RC1 20140625 build

total: 31

LTP cases	status	error msg	comment	bugzilla
getrusage03	NAB	getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory	Not enough memory.
fanotify01	NAB	fanotify01 1 TCONF : fanotify is not configured in this kernel.
fanotify02	NAB	fanotify02 1 TCONF : fanotify is not configured in this kernel.
fanotify04	NAB	fanotify04 1 TCONF : fanotify is not configured in this kernel.
readahead02	NAB	readahead02 0 TWARN : using less cache than expected	The system doesn't have /proc/pid/io, unable to determine read bytes during test
setregid02	LTP	setregid02 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success
setregid02_16	LTP	setregid02_16 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success
syslog01	qemux86
syslog02	qemux86
syslog03	qemux86
syslog04	qemux86
syslog05	qemux86
syslog06	qemux86
syslog07	qemux86
syslog08	qemux86
syslog09	qemux86
syslog10	qemux86
mtest06_2	NAB	main(): mmap(): Cannot allocate memory	Not enough memory.
thp02	NAB	thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
thp03	NAB	thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo	The system doesn't support it
su01	qemux86
cron02	qemux86
cron_deny01	qemux86
cron_allow01	qemux86
cron_dirs_checks01	qemux86
file	qemux86
cron	qemux86
logrotate	qemux86
cpio	qemux86
unzip01		sh: unzip_tests.sh: command not found
gzip01	qemux86

@@ Line 1: / Line 1: @@
+==3.1 RC2 build==
+'''total: 7'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
+|-
+|| settimeofday01 ||  || TBROK  :  tst_sig.c:232: unexpected signal SIGSEGV(11) received (pid = 11642). ||  ||
+|-
+|| settimeofday02 ||  || TBROK  :  tst_sig.c:232: unexpected signal SIGSEGV(11) received (pid = 11643). ||  ||
+|-
+|| perf_event_open01 ||  || TFAIL  :  perf_event_open01.c:158: perf_event_open PERF_COUNT_HW_INSTRUCTIONS failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument ||  ||
+|-
+|| copy_file_range02 ||  || FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EFBIG (27)
+ ||  ||
+|-
+|| vma05 || LTP || TFAIL: [vdso] bug not patched || https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html ||
+|-
+|| unshare01_sh || NAB  || unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+|-
+|}
+==3.0 RC2 build==
+'''total: 5'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| perf_event_open01 ||  || TFAIL  :  perf_event_open01.c:158: perf_event_open PERF_COUNT_HW_INSTRUCTIONS failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument ||  ||
+|-
+|| vma05 || LTP || TFAIL: [vdso] bug not patched || https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html ||
+|-
+|| unshare01_sh || NAB  || unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+|-
+|}
+==2.7 RC2 build==
+'''total: 6'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
+|-
+|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| vma05 || LTP || TFAIL: [vdso] bug not patched || https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html ||
+|-
+|| file01_sh || LTP || file01 10 TFAIL: in: was not recognized
+|| Need to update the case since the file command had been upgraded. ||
+|-
+|| unshare01_sh || NAB  || unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+|-
+|}
+==2.7 M3 RC1 build==
+'''total: 6'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
+|-
+|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| vma05 || LTP || TFAIL: [vdso] bug not patched || https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html ||
+|-
+|| file01_sh || LTP || file01 10 TFAIL: in: was not recognized
+|| Need to update the case since the file command had been upgraded. ||
+|-
+|| unshare01_sh || NAB  || unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+|-
+|}
+==2.7 M2 RC1 build==
+'''total: 8'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
+|-
+|| inotify09 || NEW || tst_test.c:1072: INFO: Timeout per run is 0h 05m 00s Test timeouted, sending SIGKILL! || ||
+|-
+|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| vma05 ||  || TFAIL: [vdso] bug not patched || ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
+|-
+|}
+==2.7 M1 RC1 build==
+'''total: 8'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
+|-
+|| inotify09 || NEW || tst_test.c:1072: INFO: Timeout per run is 0h 05m 00s Test timeouted, sending SIGKILL! || ||
+|-
+|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| vma05 ||  || TFAIL: [vdso] bug not patched || ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
+|-
+|}
+==2.6 RC1 build==
+'''total: 9'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| fs_fill || NEW || Test timeouted, sending SIGKILL! tst_test.c:1055: INFO: If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1 tst_test.c:1056: BROK: Test killed! (timeout?) || If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1 ||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| vma05 ||  || TFAIL: [vdso] bug not patched || ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
+|-
+|}
+==2.6 M3 RC1 build==
+'''total: 10'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| sigwaitinfo01 || LTP || sigwaitinfo01    7  TFAIL  :  sigwaitinfo01.c:386: Unrecognised child exit code || LTP fixed in commit 4926a47b538060e07bf7a7d36dec5a0c07b7ce9b ||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| vma05 ||  || TFAIL: [vdso] bug not patched || ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
+|-
+|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+||
+|-
+|}
+==2.6 M2 RC1 build==
+'''total: 9'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| vma05 || NEW || TFAIL: [vdso] bug not patched || ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
+|-
+|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+||
+|-
+|}
+==2.6 M1 RC1 build==
+'''total: 10'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| fs_fill || NEW || tst_test.c:1056: BROK: Test killed! (timeout?) || tst_test.c:1055: INFO: If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1 ||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| vma05 || NEW || TFAIL: [vdso] bug not patched || ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| ld01 || NEW || ld01 1 TBROK: gcc -fPIC -c -o rf1.o /opt/ltp/testcases/data/ld01/rf1.c failed || cc1: error: -mfloat-abi=hard: selected processor lacks an FPU. See bug https://bugzilla.yoctoproject.org/show_bug.cgi?id=12795 ||
+|-
+|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+||
+|-
+|}
+==2.5 RC1 build==
+'''total: 12'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| perf_event_open02 || LTP || perf_event_open02    1  TFAIL  :  perf_event_open02.c:333: test failed (ratio was greater than ) || It's more likely to happen under heavy CPU load. See bug report: https://bugs.linaro.org/show_bug.cgi?id=3382 ||
+|-
+|| ksm03 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| ksm03_1 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| vma05 || NEW || TFAIL: [vdso] bug not patched || ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+||
+|-
+|}
+==2.5 M3 RC1 build==
+'''total: 12'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
+|-
+|| keyctl06 || NAB || keyctl06.c:68: FAIL: KEYCTL_READ returned 4 but expected 8 || This case is for regression test for kernel commits e645016abc80 and 3239b6f29bdf which were introduced by kernel 4.14. It would fail on 4.12 kernel. ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| perf_event_open02 || LTP || perf_event_open02    1  TFAIL  :  perf_event_open02.c:333: test failed (ratio was greater than ) || It's more likely to happen under heavy CPU load. See bug report: https://bugs.linaro.org/show_bug.cgi?id=3382 ||
+|-
+|| ksm03 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| ksm03_1 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| vma05 || NEW || TFAIL: [vdso] bug not patched || ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+||
+|-
+|}
+==2.5 M2 RC1 build==
+'''total: 12'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
+|-
+|| fanotify06 || LTP || tst_test.c:1025: BROK: Test killed by SIGSEGV! || LTP bug. Upstream had fixed it. ||
+|-
+|| keyctl06 || NAB || keyctl06.c:68: FAIL: KEYCTL_READ returned 4 but expected 8 || This case is for regression test for kernel commits e645016abc80 and 3239b6f29bdf which were introduced by kernel 4.14. It would fail on 4.12 kernel. ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
+|-
+|| perf_event_open02 || LTP || perf_event_open02    1  TFAIL  :  perf_event_open02.c:333: test failed (ratio was greater than ) || It's more likely to happen under heavy CPU load. See bug report: https://bugs.linaro.org/show_bug.cgi?id=3382 ||
+|-
+|| ksm03 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| ksm03_1 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
+For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
+To make it pass on Poky with sysvinit, run the following command before run the test case:
+mount --make-shared /
+cat /proc/self/mountinfo | grep shared
+0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
+cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
+||
+|-
+|}
+==2.5 M1 RC3 build==
+'''total: 12'''
+{|border="1"
+|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
+|-
+|| add_key03 ||  || add_key03.c:86: FAIL: created user keyring for another user ||  ||
+|-
+|| fsync02 ||  || fsync02     1  TFAIL  :  fsync02.c:137: fsync took too long: 185.000000 seconds; max_block: 146029; data_blocks: 384 ||  ||
+|-
+|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
+|-
+|| keyctl06 ||  || keyctl06.c:50: FAIL: KEYCTL_READ overran the buffer ||  ||
+|-
+|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
+|-
+|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. || quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. ||
+|-
+|| perf_event_open02 || || perf_event_open02    1  TFAIL  :  perf_event_open02.c:333: test failed (ratio was greater than ) ||  ||
+|-
+|| ksm03 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled ||  ||
+|-
+|| ksm03_1 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled ||  ||
+|-
+|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled ||  ||
+|-
+|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
+|-
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
+|-
+|}
 ==2.5 M1 RC1 build==
 '''total: 15'''
@@ Line 28: / Line 505: @@
 || cron_allow01 || LTP || (2) TEST THAT PERSON NOT IN /var/spool/cron/allow IS NOT ABLE TO RUN JOB. Cron allowed user to execute test job, TEST FAILED || The test case specifies /var/spool/cron/allow and /var/spool/cron/deny as the default configure, but in Yocto, we use /etc/cron.allow and /etc/cron.deny. Modify the test script before testing. ||
 |-
-|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! ||  ||
+|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
 |-
 || ar ||  || ar: `u' modifier ignored since `D' is the default (see `U') 14 TFAIL: ar haven't updated modified file0 (-u) || Already sent a patch to oe ||

Beaglebone-ltp: Difference between revisions

Latest revision as of 03:09, 9 April 2020

3.1 RC2 build

3.0 RC2 build

2.7 RC2 build

2.7 M3 RC1 build

2.7 M2 RC1 build

2.7 M1 RC1 build

2.6 RC1 build

2.6 M3 RC1 build

2.6 M2 RC1 build

2.6 M1 RC1 build

2.5 RC1 build

2.5 M3 RC1 build

2.5 M2 RC1 build

2.5 M1 RC3 build

2.5 M1 RC1 build

2.4 RC3 build

2.4 RC2 build

2.4 RC1 build

2.4 M2 RC3 build

2.3 RC2 build

2.3 M3 RC2 build

2.3 M2 RC3 build

2.3 M1 RC1 build

2.2 RC4 build

2.2 M3 RC1 build

2.2 M2 RC1 build

2.1 RC2 build

2.0 RC3 build

2.0 RC2 build

1.9 M3 RC1 build

1.9 M2 RC2 build

1.9 M1 RC2 build

1.8 M4 RC2 build

1.8 M3 RC3 build

1.8 M1 RC1 build

1.7 M4 RC5 20141018 build

1.7 M4 RC4 20141011 build

1.7 M2 RC1 20140730 build

1.7 M1 RC1 20140625 build

Navigation menu

Search