Beaglebone-ltp: Difference between revisions

From Yocto Project
Jump to navigationJump to search
 
(41 intermediate revisions by the same user not shown)
Line 1: Line 1:
==3.1 RC2 build==
'''total: 7'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
|-
|| settimeofday01 ||  || TBROK  :  tst_sig.c:232: unexpected signal SIGSEGV(11) received (pid = 11642). ||  ||
|-
|| settimeofday02 ||  || TBROK  :  tst_sig.c:232: unexpected signal SIGSEGV(11) received (pid = 11643). ||  ||
|-
|| perf_event_open01 ||  || TFAIL  :  perf_event_open01.c:158: perf_event_open PERF_COUNT_HW_INSTRUCTIONS failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument ||  ||
|-
|| copy_file_range02 ||  || FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EFBIG (27)
||  ||
|-
|| vma05 || LTP || TFAIL: [vdso] bug not patched || https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html ||
|-
|| unshare01_sh || NAB  || unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
To make it pass on Poky with sysvinit, run the following command before run the test case:
mount --make-shared /
cat /proc/self/mountinfo | grep shared
15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
|-
|}
==3.0 RC2 build==
'''total: 5'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| perf_event_open01 ||  || TFAIL  :  perf_event_open01.c:158: perf_event_open PERF_COUNT_HW_INSTRUCTIONS failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument ||  ||
|-
|| vma05 || LTP || TFAIL: [vdso] bug not patched || https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html ||
|-
|| unshare01_sh || NAB  || unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
To make it pass on Poky with sysvinit, run the following command before run the test case:
mount --make-shared /
cat /proc/self/mountinfo | grep shared
15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
|-
|}
==2.7 RC2 build==
'''total: 6'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| vma05 || LTP || TFAIL: [vdso] bug not patched || https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html ||
|-
|| file01_sh || LTP || file01 10 TFAIL: in: was not recognized
|| Need to update the case since the file command had been upgraded. ||
|-
|| unshare01_sh || NAB  || unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
To make it pass on Poky with sysvinit, run the following command before run the test case:
mount --make-shared /
cat /proc/self/mountinfo | grep shared
15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
|-
|}
==2.7 M3 RC1 build==
'''total: 6'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| vma05 || LTP || TFAIL: [vdso] bug not patched || https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html ||
|-
|| file01_sh || LTP || file01 10 TFAIL: in: was not recognized
|| Need to update the case since the file command had been upgraded. ||
|-
|| unshare01_sh || NAB  || unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
To make it pass on Poky with sysvinit, run the following command before run the test case:
mount --make-shared /
cat /proc/self/mountinfo | grep shared
15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
|-
|}
==2.7 M2 RC1 build==
'''total: 8'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| inotify09 || NEW || tst_test.c:1072: INFO: Timeout per run is 0h 05m 00s Test timeouted, sending SIGKILL! || ||
|-
|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| vma05 ||  || TFAIL: [vdso] bug not patched || ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
|-
|}
==2.7 M1 RC1 build==
'''total: 8'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| inotify09 || NEW || tst_test.c:1072: INFO: Timeout per run is 0h 05m 00s Test timeouted, sending SIGKILL! || ||
|-
|| msgstress03 || NAB || msgstress03    1  TFAIL  :  msgstress03.c:157:  Fork failed (may be OK if under stress)|| May be OK if under stress ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| vma05 ||  || TFAIL: [vdso] bug not patched || ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
|-
|}
==2.6 RC1 build==
'''total: 9'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| fs_fill || NEW || Test timeouted, sending SIGKILL! tst_test.c:1055: INFO: If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1 tst_test.c:1056: BROK: Test killed! (timeout?) || If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1 ||
|-
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| vma05 ||  || TFAIL: [vdso] bug not patched || ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
|-
|}
==2.6 M3 RC1 build==
'''total: 10'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| sigwaitinfo01 || LTP || sigwaitinfo01    7  TFAIL  :  sigwaitinfo01.c:386: Unrecognised child exit code || LTP fixed in commit 4926a47b538060e07bf7a7d36dec5a0c07b7ce9b ||
|-
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| vma05 ||  || TFAIL: [vdso] bug not patched || ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
|-
|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
To make it pass on Poky with sysvinit, run the following command before run the test case:
mount --make-shared /
cat /proc/self/mountinfo | grep shared
15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
||
|-
|}
==2.6 M2 RC1 build==
'''total: 9'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| vma05 || NEW || TFAIL: [vdso] bug not patched || ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
|-
|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
To make it pass on Poky with sysvinit, run the following command before run the test case:
mount --make-shared /
cat /proc/self/mountinfo | grep shared
15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
||
|-
|}
==2.6 M1 RC1 build==
'''total: 10'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| fs_fill || NEW || tst_test.c:1056: BROK: Test killed! (timeout?) || tst_test.c:1055: INFO: If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1 ||
|-
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| vma05 || NEW || TFAIL: [vdso] bug not patched || ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| ld01 || NEW || ld01 1 TBROK: gcc -fPIC -c -o rf1.o /opt/ltp/testcases/data/ld01/rf1.c failed || cc1: error: -mfloat-abi=hard: selected processor lacks an FPU. See bug https://bugzilla.yoctoproject.org/show_bug.cgi?id=12795 ||
|-
|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
To make it pass on Poky with sysvinit, run the following command before run the test case:
mount --make-shared /
cat /proc/self/mountinfo | grep shared
15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
||
|-
|}
==2.5 RC1 build==
'''total: 12'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| perf_event_open02 || LTP || perf_event_open02    1  TFAIL  :  perf_event_open02.c:333: test failed (ratio was greater than ) || It's more likely to happen under heavy CPU load. See bug report: https://bugs.linaro.org/show_bug.cgi?id=3382 ||
|-
|| ksm03 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| ksm03_1 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| vma05 || NEW || TFAIL: [vdso] bug not patched || ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
To make it pass on Poky with sysvinit, run the following command before run the test case:
mount --make-shared /
cat /proc/self/mountinfo | grep shared
15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
||
|-
|}
==2.5 M3 RC1 build==
'''total: 12'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| keyctl06 || NAB || keyctl06.c:68: FAIL: KEYCTL_READ returned 4 but expected 8 || This case is for regression test for kernel commits e645016abc80 and 3239b6f29bdf which were introduced by kernel 4.14. It would fail on 4.12 kernel. ||
|-
|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| perf_event_open02 || LTP || perf_event_open02    1  TFAIL  :  perf_event_open02.c:333: test failed (ratio was greater than ) || It's more likely to happen under heavy CPU load. See bug report: https://bugs.linaro.org/show_bug.cgi?id=3382 ||
|-
|| ksm03 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| ksm03_1 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| vma05 || NEW || TFAIL: [vdso] bug not patched || ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
To make it pass on Poky with sysvinit, run the following command before run the test case:
mount --make-shared /
cat /proc/self/mountinfo | grep shared
15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
||
|-
|}
==2.5 M2 RC1 build==
'''total: 12'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| fanotify06 || LTP || tst_test.c:1025: BROK: Test killed by SIGSEGV! || LTP bug. Upstream had fixed it. ||
|-
|| keyctl06 || NAB || keyctl06.c:68: FAIL: KEYCTL_READ returned 4 but expected 8 || This case is for regression test for kernel commits e645016abc80 and 3239b6f29bdf which were introduced by kernel 4.14. It would fail on 4.12 kernel. ||
|-
|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| perf_event_open02 || LTP || perf_event_open02    1  TFAIL  :  perf_event_open02.c:333: test failed (ratio was greater than ) || It's more likely to happen under heavy CPU load. See bug report: https://bugs.linaro.org/show_bug.cgi?id=3382 ||
|-
|| ksm03 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| ksm03_1 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".
For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593
To make it pass on Poky with sysvinit, run the following command before run the test case:
mount --make-shared /
cat /proc/self/mountinfo | grep shared
15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered
cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
||
|-
|}
==2.5 M1 RC3 build==
'''total: 12'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| add_key03 ||  || add_key03.c:86: FAIL: created user keyring for another user ||  ||
|-
|| fsync02 ||  || fsync02    1  TFAIL  :  fsync02.c:137: fsync took too long: 185.000000 seconds; max_block: 146029; data_blocks: 384 ||  ||
|-
|| getrusage03 || NAB || getrusage03_child    1  TBROK  :  safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| keyctl06 ||  || keyctl06.c:50: FAIL: KEYCTL_READ overran the buffer ||  ||
|-
|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. || quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. ||
|-
|| perf_event_open02 || || perf_event_open02    1  TFAIL  :  perf_event_open02.c:333: test failed (ratio was greater than ) ||  ||
|-
|| ksm03 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled ||  ||
|-
|| ksm03_1 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled ||  ||
|-
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled ||  ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|}
==2.5 M1 RC1 build==
==2.5 M1 RC1 build==
'''total: 15'''
'''total: 15'''
Line 12: Line 489:
|| keyctl06 || NEW || keyctl06.c:50: FAIL: KEYCTL_READ overran the buffer ||  ||
|| keyctl06 || NEW || keyctl06.c:50: FAIL: KEYCTL_READ overran the buffer ||  ||
|-
|-
|| msgctl10 || || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
|| msgctl10 || NAB || msgctl10    1  TFAIL  :  msgctl10.c:157:    Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. || quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. ||
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. || quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. ||
Line 24: Line 501:
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled ||  ||
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled ||  ||
|-
|-
|| su01 || usermod: group 'trusted' does not exist usermod: group 'trusted' does not exist YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || ||  ||
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|-
|| cron_allow01 || (2) TEST THAT PERSON NOT IN /var/spool/cron/allow IS NOT ABLE TO RUN JOB. Cron allowed user to execute test job, TEST FAILED || ||  ||
|| cron_allow01 || LTP || (2) TEST THAT PERSON NOT IN /var/spool/cron/allow IS NOT ABLE TO RUN JOB. Cron allowed user to execute test job, TEST FAILED || The test case specifies /var/spool/cron/allow and /var/spool/cron/deny as the default configure, but in Yocto, we use /etc/cron.allow and /etc/cron.deny. Modify the test script before testing. ||
|-
|-
|| cron_dirs_checks01 || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || ||  ||
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|-
|| ar ||  || ar: `u' modifier ignored since `D' is the default (see `U') 14 TFAIL: ar haven't updated modified file0 (-u) || Already sent a patch to oe ||
|| ar ||  || ar: `u' modifier ignored since `D' is the default (see `U') 14 TFAIL: ar haven't updated modified file0 (-u) || Already sent a patch to oe ||

Latest revision as of 03:09, 9 April 2020

3.1 RC2 build

total: 7

LTP cases status error msg comment bugzilla
msgstress03 NAB msgstress03 1 TFAIL  : msgstress03.c:157: Fork failed (may be OK if under stress) May be OK if under stress
settimeofday01 TBROK  : tst_sig.c:232: unexpected signal SIGSEGV(11) received (pid = 11642).
settimeofday02 TBROK  : tst_sig.c:232: unexpected signal SIGSEGV(11) received (pid = 11643).
perf_event_open01 TFAIL  : perf_event_open01.c:158: perf_event_open PERF_COUNT_HW_INSTRUCTIONS failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument
copy_file_range02 FAIL: copy_file_range failed unexpectedly; expected EOVERFLOW, but got: EFBIG (27)
vma05 LTP TFAIL: [vdso] bug not patched https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html
unshare01_sh NAB unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

3.0 RC2 build

total: 5

LTP cases status error msg comment bugzilla
msgstress03 NAB msgstress03 1 TFAIL  : msgstress03.c:157: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
perf_event_open01 TFAIL  : perf_event_open01.c:158: perf_event_open PERF_COUNT_HW_INSTRUCTIONS failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument
vma05 LTP TFAIL: [vdso] bug not patched https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html
unshare01_sh NAB unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.7 RC2 build

total: 6

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
msgstress03 NAB msgstress03 1 TFAIL  : msgstress03.c:157: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
vma05 LTP TFAIL: [vdso] bug not patched https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html
file01_sh LTP file01 10 TFAIL: in: was not recognized Need to update the case since the file command had been upgraded.
unshare01_sh NAB unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.7 M3 RC1 build

total: 6

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
msgstress03 NAB msgstress03 1 TFAIL  : msgstress03.c:157: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
vma05 LTP TFAIL: [vdso] bug not patched https://bugs.linaro.org/show_bug.cgi?id=4256 http://lists.linux.it/pipermail/ltp/2019-January/010634.html
file01_sh LTP file01 10 TFAIL: in: was not recognized Need to update the case since the file command had been upgraded.
unshare01_sh NAB unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.7 M2 RC1 build

total: 8

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
inotify09 NEW tst_test.c:1072: INFO: Timeout per run is 0h 05m 00s Test timeouted, sending SIGKILL!
msgstress03 NAB msgstress03 1 TFAIL  : msgstress03.c:157: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
vma05 TFAIL: [vdso] bug not patched
su01 LTP YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. The ltp test script has issue.
cron_dirs_checks01 NAB FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01 NAB ld01 3 TFAIL: Failed to build shared library file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug.

2.7 M1 RC1 build

total: 8

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
inotify09 NEW tst_test.c:1072: INFO: Timeout per run is 0h 05m 00s Test timeouted, sending SIGKILL!
msgstress03 NAB msgstress03 1 TFAIL  : msgstress03.c:157: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
vma05 TFAIL: [vdso] bug not patched
su01 LTP YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. The ltp test script has issue.
cron_dirs_checks01 NAB FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01 NAB ld01 3 TFAIL: Failed to build shared library file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug.

2.6 RC1 build

total: 9

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
msgctl10 NAB msgctl10 1 TFAIL  : msgctl10.c:157: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
fs_fill NEW Test timeouted, sending SIGKILL! tst_test.c:1055: INFO: If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1 tst_test.c:1056: BROK: Test killed! (timeout?) If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1
ksm05 NAB ksm05.c:98: CONF: KSM configuration is not enabled KSM configuration is not enabled
vma05 TFAIL: [vdso] bug not patched
su01 LTP YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. The ltp test script has issue.
cron_dirs_checks01 NAB FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01 NAB ld01 3 TFAIL: Failed to build shared library file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug.

2.6 M3 RC1 build

total: 10

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
msgctl10 NAB msgctl10 1 TFAIL  : msgctl10.c:157: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
sigwaitinfo01 LTP sigwaitinfo01 7 TFAIL  : sigwaitinfo01.c:386: Unrecognised child exit code LTP fixed in commit 4926a47b538060e07bf7a7d36dec5a0c07b7ce9b
ksm05 NAB ksm05.c:98: CONF: KSM configuration is not enabled KSM configuration is not enabled
vma05 TFAIL: [vdso] bug not patched
su01 LTP YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. The ltp test script has issue.
cron_dirs_checks01 NAB FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01 NAB ld01 3 TFAIL: Failed to build shared library file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug.
unshare01 NAB TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.6 M2 RC1 build

total: 9

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
msgctl10 NAB msgctl10 1 TFAIL  : msgctl10.c:157: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
ksm05 NAB ksm05.c:98: CONF: KSM configuration is not enabled KSM configuration is not enabled
vma05 NEW TFAIL: [vdso] bug not patched
su01 LTP YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. The ltp test script has issue.
cron_dirs_checks01 NAB FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01 NAB ld01 3 TFAIL: Failed to build shared library file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug.
unshare01 NAB TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.6 M1 RC1 build

total: 10

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
msgctl10 NAB msgctl10 1 TFAIL  : msgctl10.c:157: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
fs_fill NEW tst_test.c:1056: BROK: Test killed! (timeout?) tst_test.c:1055: INFO: If you are running on slow machine, try exporting LTP_TIMEOUT_MUL > 1
ksm05 NAB ksm05.c:98: CONF: KSM configuration is not enabled KSM configuration is not enabled
vma05 NEW TFAIL: [vdso] bug not patched
su01 LTP YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. The ltp test script has issue.
cron_dirs_checks01 NAB FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ld01 NEW ld01 1 TBROK: gcc -fPIC -c -o rf1.o /opt/ltp/testcases/data/ld01/rf1.c failed cc1: error: -mfloat-abi=hard: selected processor lacks an FPU. See bug https://bugzilla.yoctoproject.org/show_bug.cgi?id=12795
unshare01 NAB TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.5 RC1 build

total: 12

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
msgctl10 NAB msgctl10 1 TFAIL  : msgctl10.c:157: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
perf_event_open02 LTP perf_event_open02 1 TFAIL  : perf_event_open02.c:333: test failed (ratio was greater than ) It's more likely to happen under heavy CPU load. See bug report: https://bugs.linaro.org/show_bug.cgi?id=3382
ksm03 NAB ksm03.c:71: CONF: KSM configuration is not enabled KSM configuration is not enabled
ksm03_1 NAB ksm03.c:71: CONF: KSM configuration is not enabled KSM configuration is not enabled
ksm05 NAB ksm05.c:98: CONF: KSM configuration is not enabled KSM configuration is not enabled
vma05 NEW TFAIL: [vdso] bug not patched
su01 LTP YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. The ltp test script has issue.
cron_dirs_checks01 NAB FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
unshare01 NAB TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.5 M3 RC1 build

total: 12

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
keyctl06 NAB keyctl06.c:68: FAIL: KEYCTL_READ returned 4 but expected 8 This case is for regression test for kernel commits e645016abc80 and 3239b6f29bdf which were introduced by kernel 4.14. It would fail on 4.12 kernel.
msgctl10 NAB msgctl10 1 TFAIL  : msgctl10.c:157: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
perf_event_open02 LTP perf_event_open02 1 TFAIL  : perf_event_open02.c:333: test failed (ratio was greater than ) It's more likely to happen under heavy CPU load. See bug report: https://bugs.linaro.org/show_bug.cgi?id=3382
ksm03 NAB ksm03.c:71: CONF: KSM configuration is not enabled KSM configuration is not enabled
ksm03_1 NAB ksm03.c:71: CONF: KSM configuration is not enabled KSM configuration is not enabled
ksm05 NAB ksm05.c:98: CONF: KSM configuration is not enabled KSM configuration is not enabled
vma05 NEW TFAIL: [vdso] bug not patched
su01 LTP YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. The ltp test script has issue.
cron_dirs_checks01 NAB FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
unshare01 NAB TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.5 M2 RC1 build

total: 12

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
fanotify06 LTP tst_test.c:1025: BROK: Test killed by SIGSEGV! LTP bug. Upstream had fixed it.
keyctl06 NAB keyctl06.c:68: FAIL: KEYCTL_READ returned 4 but expected 8 This case is for regression test for kernel commits e645016abc80 and 3239b6f29bdf which were introduced by kernel 4.14. It would fail on 4.12 kernel.
msgctl10 NAB msgctl10 1 TFAIL  : msgctl10.c:157: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE
perf_event_open02 LTP perf_event_open02 1 TFAIL  : perf_event_open02.c:333: test failed (ratio was greater than ) It's more likely to happen under heavy CPU load. See bug report: https://bugs.linaro.org/show_bug.cgi?id=3382
ksm03 NAB ksm03.c:71: CONF: KSM configuration is not enabled KSM configuration is not enabled
ksm03_1 NAB ksm03.c:71: CONF: KSM configuration is not enabled KSM configuration is not enabled
ksm05 NAB ksm05.c:98: CONF: KSM configuration is not enabled KSM configuration is not enabled
su01 LTP YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. The ltp test script has issue.
cron_dirs_checks01 NAB FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
unshare01 NAB TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01

2.5 M1 RC3 build

total: 12

LTP cases status error msg comment bugzilla
add_key03 add_key03.c:86: FAIL: created user keyring for another user
fsync02 fsync02 1 TFAIL  : fsync02.c:137: fsync took too long: 185.000000 seconds; max_block: 146029; data_blocks: 384
getrusage03 NAB getrusage03_child 1 TBROK  : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
keyctl06 keyctl06.c:50: FAIL: KEYCTL_READ overran the buffer
msgctl10 NAB msgctl10 1 TFAIL  : msgctl10.c:157: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
perf_event_open02 perf_event_open02 1 TFAIL  : perf_event_open02.c:333: test failed (ratio was greater than )
ksm03 NAB ksm03.c:71: CONF: KSM configuration is not enabled
ksm03_1 NAB ksm03.c:71: CONF: KSM configuration is not enabled
ksm05 NAB ksm05.c:98: CONF: KSM configuration is not enabled
su01 LTP YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. The ltp test script has issue.
cron_dirs_checks01 NAB FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.

2.5 M1 RC1 build

total: 15

LTP cases status error msg comment bugzilla
add_key03 NEW add_key03.c:86: FAIL: created user keyring for another user
fsync02 fsync02 1 TFAIL  : fsync02.c:137: fsync took too long: 185.000000 seconds; max_block: 146029; data_blocks: 384
getrusage03 NAB getrusage03_child 1 TBROK  : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
keyctl06 NEW keyctl06.c:50: FAIL: KEYCTL_READ overran the buffer
msgctl10 NAB msgctl10 1 TFAIL  : msgctl10.c:157: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/tmp/ltp-6fufWntVLs/YHowd0/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
perf_event_open02 perf_event_open02 1 TFAIL  : perf_event_open02.c:333: test failed (ratio was greater than )
ksm03 NAB ksm03.c:71: CONF: KSM configuration is not enabled
ksm03_1 NAB ksm03.c:71: CONF: KSM configuration is not enabled
ksm05 NAB ksm05.c:98: CONF: KSM configuration is not enabled
su01 LTP YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. The ltp test script has issue.
cron_allow01 LTP (2) TEST THAT PERSON NOT IN /var/spool/cron/allow IS NOT ABLE TO RUN JOB. Cron allowed user to execute test job, TEST FAILED The test case specifies /var/spool/cron/allow and /var/spool/cron/deny as the default configure, but in Yocto, we use /etc/cron.allow and /etc/cron.deny. Modify the test script before testing.
cron_dirs_checks01 NAB FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly.
ar ar: `u' modifier ignored since `D' is the default (see `U') 14 TFAIL: ar haven't updated modified file0 (-u) Already sent a patch to oe
tar01 tar: invalid option -- 'd' 1 TFAIL: tar dvf test.tar > tar.out failed unexpectedly Busybox tar doesn't have 'd' option. Need to install tar package

2.4 RC3 build

total: 18

LTP cases status error msg comment bugzilla
fsync02 NEW fsync02 1 TFAIL  : fsync02.c:136: fsync took too long: 151.000000 seconds; max_block: 120247; data_blocks: 384
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02 setrlimit02 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155). Upstream have already remove the corresponding case: https://github.com/linux-test-project/ltp/commit/259db6fed55f88ab32a0875e66803eee44d298be
shmat01 LTP shmat01.c:118: FAIL: shared memory address was not correct LTP had a fix in master
perf_event_open02 perf_event_open02 1 TFAIL  : perf_event_open02.c:333: test failed (ratio was greater than )
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
ksm03 NAB ksm03.c:71: CONF: KSM configuration is not enabled
ksm03_1 NAB ksm03.c:71: CONF: KSM configuration is not enabled
ksm05 NAB ksm05.c:98: CONF: KSM configuration is not enabled
thp01 LTP tst_test.c:908: INFO: Timeout per run is 0h 05m 00s execvp: Argument list too long LTP had a fix for this issue in master
su01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
ar ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01 cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
tar01 tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly Busybox tar has different behavior

2.4 RC2 build

total: 17

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02 setrlimit02 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155). Upstream have already remove the corresponding case: https://github.com/linux-test-project/ltp/commit/259db6fed55f88ab32a0875e66803eee44d298be
shmat01 LTP shmat01.c:118: FAIL: shared memory address was not correct LTP had a fix in master
perf_event_open02 perf_event_open02 1 TFAIL  : perf_event_open02.c:333: test failed (ratio was greater than )
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
ksm03 NAB ksm03.c:71: CONF: KSM configuration is not enabled
ksm03_1 NAB ksm03.c:71: CONF: KSM configuration is not enabled
ksm05 NAB ksm05.c:98: CONF: KSM configuration is not enabled
thp01 LTP tst_test.c:908: INFO: Timeout per run is 0h 05m 00s execvp: Argument list too long LTP had a fix for this issue in master
su01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
ar ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01 cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
tar01 tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly Busybox tar has different behavior

2.4 RC1 build

total: 18

LTP cases status error msg comment bugzilla
fsync02 NEW fsync02 1 TFAIL  : fsync02.c:136: fsync took too long: 170.000000 seconds; max_block: 138951; data_blocks: 384
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02 setrlimit02 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155). Upstream have already remove the corresponding case: https://github.com/linux-test-project/ltp/commit/259db6fed55f88ab32a0875e66803eee44d298be
shmat01 LTP shmat01.c:118: FAIL: shared memory address was not correct LTP had a fix in master
perf_event_open02 perf_event_open02 1 TFAIL  : perf_event_open02.c:333: test failed (ratio was greater than )
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
ksm03 NAB ksm03.c:71: CONF: KSM configuration is not enabled
ksm03_1 NAB ksm03.c:71: CONF: KSM configuration is not enabled
ksm05 NAB ksm05.c:98: CONF: KSM configuration is not enabled
thp01 LTP tst_test.c:908: INFO: Timeout per run is 0h 05m 00s execvp: Argument list too long LTP had a fix for this issue in master
su01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
ar ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01 cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
tar01 tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly Busybox tar has different behavior

2.4 M2 RC3 build

total: 15

LTP cases status error msg comment bugzilla
add_key02 add_key02.c:98: FAIL: unexpected error with key type 'user': EINVAL
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02 setrlimit02 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155). Upstream have already remove the corresponding case: https://github.com/linux-test-project/ltp/commit/259db6fed55f88ab32a0875e66803eee44d298be
perf_event_open02 perf_event_open02 1 TFAIL  : perf_event_open02.c:333: test failed (ratio was greater than )
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
su01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
ar ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01 cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
file01 file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory)
tar01 tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly Busybox tar has different behavior

2.3 RC2 build

total: 17

LTP cases status error msg comment bugzilla
faccessat01 faccessat01 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15279).
fchmodat01 fchmodat01 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15306).
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02 setrlimit02 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).
utimensat01 utimensat01 55 TFAIL : FAILED test 55
perf_event_open02 perf_event_open02 1 TFAIL  : perf_event_open02.c:333: test failed (ratio was greater than )
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
su01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
ar ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01 cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
file01 file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory)
tar01 tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly Busybox tar has different behavior

2.3 M3 RC2 build

total: 18

LTP cases status error msg comment bugzilla
faccessat01 NEW faccessat01 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15279).
fchmodat01 NEW fchmodat01 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15306).
fsync02 NAB fsync02 1 TFAIL  : fsync02.c:136: fsync took too long: 264.000000 seconds; max_block: 214375; data_blocks: 384
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
quotactl01 NAB quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
setrlimit02 setrlimit02 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).
utimensat01 utimensat01 55 TFAIL : FAILED test 55
perf_event_open02 perf_event_open02 1 TFAIL  : perf_event_open02.c:333: test failed (ratio was greater than )
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
su01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
ar ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u)
nm01 NEW cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed
file01 file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory)
tar01 tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly Busybox tar has different behavior

2.3 M2 RC3 build

total: 31

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
pwritev01_64 pwritev01 3 TFAIL  : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202 renameat202 1 TFAIL  : renameat202.c:161: renameat2() didn't swap the content of the two files
setrlimit02 setrlimit02 1 TBROK  : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 29155).
utimensat01 utimensat01 55 TFAIL : FAILED test 55
writev01 writev01 4 TFAIL  : writev01.c:204: writev failed unexpectedly: errno=EFAULT(14): Bad address
writev03 writev03 1 TFAIL  : writev03.c:145: Got EFAULT
writev04 writev04 1 TFAIL  : writev04.c:164: Got error EFAULT
perf_event_open01 NAB perf_event_open01 1 TFAIL  : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported System doesn't support
perf_event_open02 perf_event_open02 1 TFAIL  : perf_event_open02.c:333: test failed (ratio was greater than )
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
su01 qemux86
cron02 qemux86
cron_allow01 qemux86
cron_deny01 qemux86
cron_dirs_checks01 qemux86
ar FAIL - ar with -u flag failed
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86
which01 which01 1 TFAIL : 'which pname' failed, not expected.

2.3 M1 RC1 build

total: 31

LTP cases status error msg comment bugzilla
fsync02 fsync02 1 TFAIL  : fsync02.c:136: fsync took too long: 263.000000 seconds; max_block: 214375; data_blocks: 384 Micro SD card is slow
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
pwritev01_64 pwritev01 3 TFAIL  : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202 renameat202 1 TFAIL  : renameat202.c:161: renameat2() didn't swap the content of the two files
utimensat01 utimensat01 55 TFAIL : FAILED test 55
writev01 writev01 4 TFAIL  : writev01.c:204: writev failed unexpectedly: errno=EFAULT(14): Bad address
writev03 writev03 1 TFAIL  : writev03.c:145: Got EFAULT
writev04 writev04 1 TFAIL  : writev04.c:164: Got error EFAULT
perf_event_open01 NAB perf_event_open01 1 TFAIL  : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported System doesn't support
perf_event_open01 perf_event_open02 1 TFAIL  : perf_event_open02.c:333: test failed (ratio was greater than )
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
su01 qemux86
cron02 qemux86
cron_allow01 qemux86
cron_deny01 qemux86
cron_dirs_checks01 qemux86
ar FAIL - ar with -u flag failed
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86
which01 which01 1 TFAIL : 'which pname' failed, not expected.

2.2 RC4 build

total: 31

LTP cases status error msg comment bugzilla
fsync02 fsync02 1 TFAIL  : fsync02.c:136: fsync took too long: 263.000000 seconds; max_block: 214375; data_blocks: 384 Micro SD card is slow
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
pwritev01_64 pwritev01 3 TFAIL  : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202 renameat202 1 TFAIL  : renameat202.c:161: renameat2() didn't swap the content of the two files
utimensat01 utimensat01 55 TFAIL : FAILED test 55
writev01 writev01 4 TFAIL  : writev01.c:204: writev failed unexpectedly: errno=EFAULT(14): Bad address
writev03 writev03 1 TFAIL  : writev03.c:145: Got EFAULT
writev04 writev04 1 TFAIL  : writev04.c:164: Got error EFAULT
perf_event_open01 NAB perf_event_open01 1 TFAIL  : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported System doesn't support
perf_event_open01 perf_event_open02 1 TFAIL  : perf_event_open02.c:333: test failed (ratio was greater than )
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
su01 qemux86
cron02 qemux86
cron_allow01 qemux86
cron_deny01 qemux86
cron_dirs_checks01 qemux86
ar FAIL - ar with -u flag failed
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86
which01 which01 1 TFAIL : 'which pname' failed, not expected.

2.2 M3 RC1 build

total: 26

LTP cases status error msg comment bugzilla
fsync02 fsync02 1 TFAIL  : fsync02.c:136: fsync took too long: 263.000000 seconds; max_block: 214375; data_blocks: 384 Micro SD card is slow
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
pwritev01_64 pwritev01 3 TFAIL  : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202 renameat202 1 TFAIL  : renameat202.c:161: renameat2() didn't swap the content of the two files
perf_event_open01 NAB perf_event_open01 1 TFAIL  : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported System doesn't support
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
su01 qemux86
cron02 qemux86
cron_allow01 qemux86
cron_deny01 qemux86
cron_dirs_checks01 qemux86
ar FAIL - ar with -u flag failed
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86
which01 which01 1 TFAIL : 'which pname' failed, not expected.

2.2 M2 RC1 build

total: 36

LTP cases status error msg comment bugzilla
chmod06 chmod06 0 TINFO  : No free devices found
fsync02 fsync02 1 TFAIL  : fsync02.c:136: fsync took too long: 263.000000 seconds; max_block: 214375; data_blocks: 384 Micro SD card is slow
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
inotify03 inotify03 0 TINFO  : No free devices found
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
pwritev01_64 pwritev01 3 TFAIL  : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202 renameat202 1 TFAIL  : renameat202.c:161: renameat2() didn't swap the content of the two files
perf_event_open01 NAB perf_event_open01 1 TFAIL  : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported System doesn't support
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
su01 qemux86
cron02 qemux86
cron_allow01 qemux86
cron_deny01 qemux86
cron_dirs_checks01 qemux86
ar FAIL - ar with -u flag failed
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86
df01_ext2 stat: invalid option -- '-' stat from busybox is missing some options
df01_ext3 df01 1 TBROK : mkfs.ext3 /dev/loop0 failed
df01_ext4 stat: invalid option -- '-' stat from busybox is missing some options
mkfs01 mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed
mkfs01_ext2 mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed.
mkfs01_ext3 mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed.
mkfs01_ext4 mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed.
mkfs01_minix mkfs01 1 TFAIL : 'mkfs -t minix /dev/loop0 ' failed.
which01 which01 1 TFAIL : 'which pname' failed, not expected.

2.1 RC2 build

total: 35

LTP cases status error msg comment bugzilla
chmod06 chmod06 0 TINFO  : No free devices found
fsync02 fsync02 1 TFAIL  : fsync02.c:136: fsync took too long: 263.000000 seconds; max_block: 214375; data_blocks: 384 Micro SD card is slow
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
ioctl03 ioctl03 1 TBROK  : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory
inotify03 inotify03 0 TINFO  : No free devices found
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
msgctl10 msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
pwritev01_64 pwritev01 3 TFAIL  : pwritev01.c:114: Buffer wrong at 0 have 00 expected 61
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
renameat202 renameat202 1 TFAIL  : renameat202.c:161: renameat2() didn't swap the content of the two files
perf_event_open01 NAB perf_event_open01 1 TFAIL  : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported System doesn't support
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
su01 qemux86
cron02 qemux86
cron_allow01 qemux86
cron_deny01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86
df01_ext2 stat: invalid option -- '-' stat from busybox is missing some options
df01_ext3 df01 1 TBROK : mkfs.ext3 /dev/loop0 failed
df01_ext4 stat: invalid option -- '-' stat from busybox is missing some options
mkfs01 mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed
mkfs01_ext2 mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed.
mkfs01_ext3 mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed.
mkfs01_ext4 mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed.
mkfs01_minix mkfs01 1 TFAIL : 'mkfs -t minix /dev/loop0 ' failed.
which01 which01 1 TFAIL : 'which pname' failed, not expected.

2.0 RC3 build

total: 34

LTP cases status error msg comment bugzilla
fsync02 NEW fsync02 1 TFAIL  : fsync02.c:136: fsync took too long: 250.000000 seconds; max_block: 214375; data_blocks: 384 Micro SD card error ?
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
msgctl10 NEW msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
perf_event_open01 NAB perf_event_open01 1 TFAIL  : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported System doesn't support
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
proc01 NEW proc01 6 TFAIL  : proc01.c:461: readproc() failed with 5 errors.
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

2.0 RC2 build

total: 34

LTP cases status error msg comment bugzilla
fsync02 NEW fsync02 1 TFAIL  : fsync02.c:136: fsync took too long: 250.000000 seconds; max_block: 214375; data_blocks: 384 Micro SD card error ?
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
msgctl10 NEW msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
perf_event_open01 NAB perf_event_open01 1 TFAIL  : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported System doesn't support
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
proc01 NEW proc01 6 TFAIL  : proc01.c:461: readproc() failed with 5 errors.
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

1.9 M3 RC1 build

total: 33

LTP cases status error msg comment bugzilla
fsync02 NEW fsync02 1 TFAIL  : fsync02.c:136: fsync took too long: 250.000000 seconds; max_block: 214375; data_blocks: 384 Micro SD card error ?
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
msgctl10 NEW msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
perf_event_open01 NAB perf_event_open01 1 TFAIL  : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported System doesn't support
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

1.9 M2 RC2 build

total: 33

LTP cases status error msg comment bugzilla
fsync02 NEW fsync02 1 TFAIL  : fsync02.c:136: fsync took too long: 250.000000 seconds; max_block: 214375; data_blocks: 384 Micro SD card error ?
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
msgctl10 NEW msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
perf_event_open01 NAB perf_event_open01 1 TFAIL  : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported System doesn't support
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86


1.9 M1 RC2 build

total: 33

LTP cases status error msg comment bugzilla
fsync02 NEW fsync02 1 TFAIL  : fsync02.c:136: fsync took too long: 250.000000 seconds; max_block: 214375; data_blocks: 384 Micro SD card error ?
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
msgctl10 NEW msgctl10 1 TFAIL  : msgctl10.c:168: Fork failed (may be OK if under stress) May be OK if under stress
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
perf_event_open01 NAB perf_event_open01 1 TFAIL  : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported System doesn't support
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

1.8 M4 RC2 build

total: 32

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
perf_event_open01 NAB perf_event_open01 1 TFAIL  : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported System doesn't support
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ No mkisofs command
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
ar LTP FAIL - ar with -u flag failed LTP bug. Already fixed in upstream
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

1.8 M3 RC3 build

total: 32

LTP cases status error msg comment bugzilla
fsync02 fsync02 1 TFAIL  : fsync02.c:139: fsync took too long: 248.000000 seconds; max_block: 214375; data_blocks: 384
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
perf_event_open01 NEW perf_event_open01 1 TFAIL  : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported
isofs NAB isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-B5fayzucuL/isofs.f37YbPkMAt/tmp//etc/ No mkisofs command
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

1.8 M1 RC1 build

total: 31

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
perf_event_open01 NEW perf_event_open01 1 TFAIL  : perf_event_open01.c:162: perf_event_open failed unexpectedly: TEST_ERRNO=EOPNOTSUPP(95): Operation not supported
isofs NEW isofs 1 TFAIL : tst_resm
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

1.7 M4 RC5 20141018 build

total: 29

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

1.7 M4 RC4 20141011 build

total: 29

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 qemux86 unzip01 1 TFAIL  : Test #1: unzip output differs from expected output.
gzip01 qemux86

1.7 M2 RC1 20140730 build

total: 31

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
setregid02 LTP setregid02 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success
setregid02_16 LTP setregid02_16 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 sh: unzip_tests.sh: command not found
gzip01 qemux86

1.7 M1 RC1 20140625 build

total: 31

LTP cases status error msg comment bugzilla
getrusage03 NAB getrusage03_child 1 TBROK  : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory Not enough memory.
fanotify01 NAB fanotify01 1 TCONF  : fanotify is not configured in this kernel.
fanotify02 NAB fanotify02 1 TCONF  : fanotify is not configured in this kernel.
fanotify04 NAB fanotify04 1 TCONF  : fanotify is not configured in this kernel.
readahead02 NAB readahead02 0 TWARN  : using less cache than expected The system doesn't have /proc/pid/io, unable to determine read bytes during test
setregid02 LTP setregid02 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success
setregid02_16 LTP setregid02_16 1 TBROK  : getgrnam("nobody") failed: errno=???(0): Success
syslog01 qemux86
syslog02 qemux86
syslog03 qemux86
syslog04 qemux86
syslog05 qemux86
syslog06 qemux86
syslog07 qemux86
syslog08 qemux86
syslog09 qemux86
syslog10 qemux86
mtest06_2 NAB main(): mmap(): Cannot allocate memory Not enough memory.
thp02 NAB thp02 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
thp03 NAB thp03 1 TBROK  : cannot find "Hugepagesize:" in /proc/meminfo The system doesn't support it
su01 qemux86
cron02 qemux86
cron_deny01 qemux86
cron_allow01 qemux86
cron_dirs_checks01 qemux86
file qemux86
cron qemux86
logrotate qemux86
cpio qemux86
unzip01 sh: unzip_tests.sh: command not found
gzip01 qemux86