Yocto 1.2 Features

Potential Yocto Project 1.2 Features

Yocto Project 1.2 - Target release = April 2012

Yocto Project 1.2 Themes

The topics below are the themes that some members of the team have started brainstorming for Yocto Project v1.2. These will be improved with community input.

Yocto Project 1.2 Objectives

The objectives of the Yocto 1.2 release are to increase adoption of the Yocto Project.

Yocto Project 1.2 Theme List

The Yocto Project 1.2 Themes towards the Objectives listed above are:

• Improved usability of the build system for new experienced users, new novice users and existing users.

Process for Entering New Feature Requests

• Create a new entry in the appropriate feature table below (Poky, SDK, Hardware)
  • Suggestion: start by copying an existing request as a template
• Give the feature a short, descriptive name
• Provide a one or two sentence brief description of the feature
• Set the priority as appropriate (see the legend below)
• Set the Status to "Review"
• In the Source field, enter your name along with the origination of the request (e.g. OSV, OEM, Community) if applicable; provide as much detail here as you can
• In the Comments / Bugzilla field, provide any additional information for the request, such as a link to a bugzilla entry
• Preview your Entry to make sure it looks ok and then save it

Legend

Priority: 1 = Must have, 2 = Nice to have but wouldn't block a release, 3 = Lower priority, desired, defined plan, 4 = Worthwhile ideas, no defined plan

Status: Accept = Engineering agreement to include in release, Review = Under Review for Inclusion in this release, Reject = Will not be included in this release

Sample Table

This is a sample table to show how to submit features.

Feature Name	Description	Priority	Status	Source	Comments / Bugzilla Links
Placeholder feature name	Placeholder description of the feature	1, 2, or 3	Review	name	Comment

Usability

Feature Name	Description	Priority	Status	Source	Owner	Comments / Bugzilla Links
Build Appliance: Pre-configured VM Build image built by Yocto		1	Review	davest/tracey/RP	TBD	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1557
Visual Hob	Massively update interface for Hob, perhaps similar to SuSE Studio. This is for both local (non-network) builds as well as network.	1	Review	davest/tracey/RP	TBD	xx
Hob improvements		1	Review	davest/tracey/RP	TBD	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1559
Support for non-developers	Create clear instructions for how a Windows user can take an example image from the YP web site and deploy it to a board. Assume no Linux knowledge. These instructions should be applicable in example images in BSPs	1	Review	davest/tracey/RP	TBD	xx
Firewall / Proxy handling in git	Develop a git plugin which will fall back to tunneling through HTTP if the git:// interface will not work because it is blocked by a firewall and the correct proxy is not set up.	2	Review	davest/tracey/RP	TBD	same for svn,hg,ftp,etc? -dvhart
Build Yocto behind firewall - implementation		2	Dev	Dave	Darren/Joshua	Yocto 1.2, from 1.1, the above one seems to be part of this.
Error Handling Improvements		1	Dev		Saul (Scott G)	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1543

Core/Bitbake

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
Recipe-specific sysroot		3	Review	from 1.0	Saul (Dongxiao)	1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1560
Handle old versions in WORKDIR		3	Review	from 1.0		1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1561
Build Appliance: Pre-configured VM Build image (desktop Linux OS)		3	Review	LCS		1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1558
Yocto OOPS-type messages		2.5	Review	LCS		1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1562
Ability to archive work dir	Add the ability to archive the work directory to handle the GPL compliance issue.	3	Review	LCS		1.2	Yocto 1.2, On Janitor\'s list
Make BasicHash the default		2	Review	RP			http://bugzilla.yoctoproject.org/show_bug.cgi?id=1555
Address git fetcher mirror issues		2	Review	RP			http://bugzilla.yoctoproject.org/show_bug.cgi?id=1511
LayerTooling – remote layer tool	Consider integrating Jeremy Puhlman\'s remote layers patch	2	Community	Paul	1.2
Monitor disk availability	Monitor disk availability and warn the user if it is running low. May only focus on a few directories, for example: poky/build and poky/build/downloads, this would solve the multiple mount point problem	2	Review	RP and Robert	WR Distro Team (Robert)	1.2	Yocto 1.2, from 1.1
Ability to build SRPM		3	Accept	RP Notes	Jeff Polk/Mark	1.2	Yocto 1.2, from 1.1
Classes to help install binary packages	It\'s been suggested that it would be a useful feature to be able to easily take an RPM or similar containing a software binary from a 3rd party software vendor and integrate it into an image created by the build system.	2	Review			1.2
Host intrusion prevention	We have Swabber but it\'s not integrated into our process. I believe this is because there are several recipes which don\'t work when run under strace with parallelisation. We should determine a path for inclusion of swabber into our process and execute on it so that we can be aware of, and fix, any host intrusion issues.	2	Review			1.2
Finish and enable PR server	We\'re still seeing people being forced to cleansstate too often, we need to finish up and enable the PR server so the checksummed sstate future can live	2	Review			1.2	http://thread.gmane.org/gmane.comp.handhelds.openembedded.core/1272/focus=1357 http://thread.gmane.org/gmane.comp.handhelds.openembedded.core/835/focus=852
Gstreamer	Refactor gstreamer recipes to better support COMMERCIAL_LICENSE and enabling/disabling of various codecs and features	2	Review			1.2	http://bugzilla.pokylinux.org/show_bug.cgi?id=923

QA Items

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
Patch Test System	Create a machine where developers can upload/test patches before submitting them to master to ensure builds won\'t break when patches are added. (developer autobuilders? Fuzz builds?)	2	Review	Team	Jiajun	1.2	This should work already for the pokycontrib tree
Open Source Test Cases	Perform technical, legal, and QA steps necessary to move test cases into open source.	3	Review	QA		1.2	Yocto 1.2
Start a framework for automated BSP testing	Build-testing is only half the job of BSP testing, and new BSP development is and will be ramping up even more rapidly soon. We need to start building a framework to make as much of this as automated as possible. Phase I, what we can complete for 1.2, should be the ability to load an image from the autobuilder and make it ready for booting, or actually boot it, on a given target. It would be good to use systems running Yocto images as much as possible for this.	2	Review	Tom		1.2	Maybe use CATS?
Test framework	this is a test framework that we can include in the distribution	3	Review	RP Notes		1.2	Yocto 1.2 - Is it the TI’s test framework we discussed before? A: Not necessarily, we\'re still waiting for someone to step up and really take ownership of this area but it needs some resource commitment as its not a simple task.
Package History		1	Review	RP		1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1565
Package History Analysis Tool		1	Review	RP		1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1566
Extend current QA Tests		1	Review	RP		1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1567 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1568 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1569
Enhance Automated QA Tests	Consider run-time security checking tools used by Fedora and Gentoo	2	Review			1.2
Collect data at build time to increase accuracy of estimation (hob)	Collect data at build time to allow hob to: predict the size of the generated image, more accurately reflect the built image contents, etc. This will likely involve generating data on the autobuilder which the UI can fetch and consume (with local caching for offline usage)	2	Review			1.2	http://bugzilla.pokylinux.org/show_bug.cgi?id=1316

Core Meta Data

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
Replacement for video/audio players currently in Yocto	Codec…	3	Review	Meta-data		1.2	Yocto 1.2
Investigate New UI	For demos, we would like need a reference UI that is not Sato. Investigate possibilities that the Yocto team won\'t need to maintain. OpenBox? Gnome-desktop? GP? LXDE? KDE Mobile?	3	Review	Meta-data		1.2	Yocto 1.2
Qemugl upstreaming	Opengl ES Support	3	Review	Meta-data		1.2	Yocto 1.2
selinux patch integration	add SE Linux patches in a similar way to PAM	3	Review	Meta-data		1.2	Yocto 1.2
build statistics reporting	As someone interested in how long it takes to build different images on different hardware configurations and other assorted build metrics, I would like a web based service, that takes output generated by an extended buildstats.bbclass and stores it, to compare against different machines. The end result should be a way to visualize the collected data. See: https://wiki.yoctoproject.org/wiki/Yocto_Buildbot_Autobuilder_Discussions	2	M3, Sprint A	eflanagan/Jay7/ka6sox	Beth/Jay	1.2	Yocto 1.2, from 1.1
Document multiple library versions co-existing		3	Review	Team	Saul (Dongxiao?)	1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1548
Embedded java environment or even JDK support		3	Review	Team		1.2	Yocto 1.2
Target module build	Allow for building kernel modules on the target device	2	Review	RP Notes	Darren	1.2	Yocto 1.2, On Janitor\'s list
gtk+ sato filechooser patch		3	Review	RP Notes		1.2	Yocto 1.2
sato refresh		3	Review	RP Notes		1.2	Yocto 1.2
Sanity checks on per recipe basis		2	Accept	RP Notes Bug#405	Saul (Scott G)	1.2	Yocto 1.2, from 1.1
perf scripting\' integration	Make it easy and convenient for the user to write and execute \'perf scripts\' from the IDE. We should be able to leverage and build on the Systemtap integration for this.	2	Dev	Tom	Jessica/Tom	1.2	Yocto 1.2, from 1.1
Package Documentation Audit: All recipes build	31 recipes were identified as not building during the package documentation audit done in M1, Sprint B. Those all need to build and we need to re-run a new package documentation audit.	2	Accept	Team	Scott G	1.2	Yocto 1.2, from 1.1
Parallel Locale Generation		2	Review	RP			http://bugzilla.yoctoproject.org/show_bug.cgi?id=1554
Clean up warning messages		2	Review		Saul	1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1544
Multilib: Enhance gcc recipe to support multilibs		2		RP	Ke	1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1549
Multilib: Complete recipe enablement		2		RP	Ke	1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1563
Multilib: Drop MULTILIB_IMAGE_INSTALL		2		RP	Ke	1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1564
Enhance TARGET_VENDOR field support		3	Review	RP	Ke	1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1550
MeeGo GPLv2 Sync	compare with Yocto, sync any patches	2	Accept	RP Notes	Saul (Ke)	1.2	Yocto 1.2, from 1.1
Finish Oracle/Sun Hotspot JDK/JRE support	I created an initial hack of a recipe for this for the demo - finish it up (involves licensing issues (click-through license support would be a prerequisite) as well)	2	Review	Tom	Tom	1.2	50% done already
running post installs at rootfs gen time		2	Review	RP Notes	Saul (Dexuan)	1.2
Multi-lib - 6	Create some \"standard\" multilib configurations (x86 32+64 bit)	1	Review	RP	Ke	1.2
POSIX support	address POSIX failures found in 1.1	2	Review	Team		1.2	Yocto 1.2, On Janitor\'s list
License file cleanup		2		Beth	Beth	1.2	1 week http://bugzilla.yoctoproject.org/show_bug.cgi?id=1547
Sync qemugl with MeeGo - Implementation	sync qemugl with MeeGo is complete	2	Dev (70%)	Meta-data	Saul (Edwin)	1.2	Yocto 1.2, from 1.1
Factory reset	Implement a factory reset image feature. We\'ll use one of the union mount technologies (aufs/overlayfs/union mounts) to create an overlay on the file system as the final piece of rootfs creation. The overlaid file-system will be the target of all writes made to the image after the image is generated. A user-space mechanism to disable the overlay, and therefore reset to the state of the image just after it was created, will also be provided. This feature could be further enhanced by integrating with the package manager, and other user-space switches, to create system restore points which can later be rolled back to.	2	Review	Joshua		1.2
Init	Interest in systemd as a replacement for Sys V init is growing but it may not be appropriate for deeply embedded systems. I\'d like to investigate a crop of service based and process monitoring init systems and compare them on a variety of criteria as determined by the community. Furthermore I would like to investigate supporting multiple init systems, the current SysV system, systemd and possibly others. As part of this work, and because increasingly many upstreams support systemd (no doubt thanks to its adoption in Fedora) I would like to investigate implementing some infrastructure which translates from systemd units to the appropriate init format for the supported init systems.	2	Review			1.2

Other Layer Meta Data

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
x32 Enhancements		2	Review			1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1579
BSPs or layers for a specific category of devices	This will demonstrate the value of Yocto to developers and help them get up to speed quicker for this category of devices.	2	Review	Dirk/Dave/Andy	TBD	1.2
Security layer	Many of our users are likely to want to use kernel level security mechanisms and so I\'d like to investigate supporting one of the in-kernel LSM (Linux Security Modules), possibly SMACK as used in MeeGo, and adding policy to the oe-core metadata. The LSM, policy and user-space tools could all be enabled via a distro feature. This work may well want to be in a separate layer?	4	Review	Joshua		1.2

Infrastructure

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
autobuilder layer support		2		Beth	Beth	1.2	2 weeks
autobuilder split of nightly (really an M4 task) few days license.bbclass refactor		2		Beth	Beth	1.2	1 week
buildstats memory measurements		2		Beth	Beth	1.2	1 week and half
autobuilder release checkbox (running a yocto release right from the autobuilder)		2		Beth	Beth	1.2	2 weeks
Eval Patch management tools	Consider patchwork, gerrit and others and see if they help. Any other alternatives?	3	Review	RP Notes		1.2	Yocto 1.2
Bugzilla to Wiki	Create a script which automatically populates and updates the Wiki based on changes in bugzilla.	2.5	Review	Darren		1.2	Yocto 1.2
Provide a click through license mechanism	Implement the mechanism described in Section 1.2. BSP \'Click-Through\' Licensing Procedure in the BSP Developer\'s Guide	2	Review	Tom	Tom	1.2

BSPs

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
AMT driver integration	incorporate Linux AMT into the Yocto BSPs					1.2	Intel
Zaurusd++ (devmand?)	I keep seeing changes to toggle certain features for various boards (audio on the beagleboard, N450 and spring to mind), rather than writing lots of recipes for this perhaps we could resurrect zaurusd and evolve it to reflect the projects original goals as devmand; a daemon to handle hardware quirks across a range of boards and devices.					1.2	Joshua
BSP update/intro	determine and integrate / create arch reference BSPs (e500, Cortex, ARM, MIPs)	2	Dev	Bruce/Richard/team	Bruce	1.2	Yocto 1.2, from 1.1
Drop Grub for Syslinux	Grub is considerably more complicated than we need for any of our current BSPs. Syslinux can be used in place of every known usage of Grub. For upcoming EFI BSPs, we can look to Efilinux. This will reduce our bootloader maintenance burden and simplify our images.	2	Review	Darren	Darren	1.2
Integrate alsa-state	Remove all the BSP specific $MACHINE-audio recipes in favor of the more generic alsa-state mechanism in use by OE already.	1	Review	Darren		1.2	This possibly conflicts with the item to refresh zaurusd.
Upgrade to EFI	Where possible, update our existing BSPs to boot using EFI. This will support development of efilinux as well as help us prepare for the newer boards which will be EFI only.	2	Review	Darren	Darren	1.2
BSP/kernel wrappers/wizards	Create some simple scripts or 'wizards' that make it easy for users to start writing a new BSP and/or easily make simple kernel modifications to a BSP. Ideally, users shouldn't need to know anything low-level about the kernel, git, or the mechanics of appending config items to recipes in order to get a BSP up and running or to make the simple modifications needed to tweak or maintain it.	2	Review	tomz	tomz	1.2
replace qemuppc					Bruce	1.2	Come from bug 414

ADT / Tools and Support

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
Enhance the deploy part in remote debug	ADT is currently using org.eclipse.cdt.remote.launch for remote debug. One limitation in this plug-in is that it can only deploy one single file to the target during the debug. Though it is ok for debugging static linked program, debugging dynamic linked program might require deploying multiple files(including executables and libraries) to the target.	2	Review	Lianhao	Jessica	1.2
Secure login		2	Review	ADT Team	Jessica	1.2	Yocto 1.2
Linux tools upstream integration	There're some activities within the Eclipse Linux Tools community for various tools remote invocation improvement, we need to sync up with the community for their latest deliveries and make some contribution if possible	2	Review	ADT Team	Jessica	1.2	Yocto 1.2
Add recipe supporting autoconf-nativesdk and automake-nativesdk	The new libtool m4 macros(supporting --with-libtool-sysroot) resides in the directory where host aclocal can not find it by default. This requires the user to manually add that directory using -I options. Adding automake(autoconf)-nativesdk into meta-toolchain would help this.	2	Review	Lianhao		1.2	Yocto 1.2
Eclipse BSP/Kernel Plugin	Provide an Eclipse plugin to facilitate configuring new BSPs and streamlining the linuix-yocto development workflow.	2	Review	Darren		1.2
enhance the bitbake commander eclipse plugin	By having the Eclipse as a frontend UI to bitbake server, eclipse may talk to bitbake server, enable the user to glimpse on the variables' values when editing the recipes, try out building the recipe being edited, etc.	2	Review	Dongxiao/Lianhao	TBD	TBD	This requires new features both in eclipse plugin and bitbake server.
Tracing: tuna, oscilloscope recipes	This might be more useful with the increased importance of RT	3	Review	from 1.0		1.2	Yocto 1.2
Tracing/profiling HOWTOs	Create a document or extend the current Yocto tracing wiki page to explain in detail how to use all the tracing tools in Yocto. It should detail not only how to use each tool individually, but also how to use them in conjunction with each other, highlighting situations in which each is most useful. There should also be some extensive worked examples of real-life use-cases and how they could be investigated using the Yocto tracing/profiling tools.	2	Accept	Tom	Tom	1.2	Yocto 1.2, from 1.1
Tracing: Systemtap usability in Yocto		2	Accept	Tom	Tom	1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1551
Tracing: create separate recipe for perf		2	Review	Tom	Tom	1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1552
Tracing: perf trace scripting support		2	Dev (50%)	from 1.0	Tom	1.2	http://bugzilla.yoctoproject.org/show_bug.cgi?id=1553

Documentation

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
Various Demo Videos	The idea here is to create screen-capture type tutorials similar to what exists for the ADT Eclipse Plug-in. However, we want to contract out some help for professional voice-over talent to be used with the images. These don\'t have to be limited to screen-capture material but could include well-done PPT decks - similar to how other business units in Intel create various training modules. For 1.1 it would be good to capture the script for the existing ADT Eclipse Plug-in module and have it voiced over. Also, for 1.1 it would be good to create a similar module for the Image Creator application.	2	Not Started	From ADT module and scratch	ScottR	1.2	Q3 at the earliest

Kernel

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
Minimal Image unique	make minimal image smaller	3	Accept	Team	WR Distro Team	1.2	Yocto 1.2, from 1.1
Kernel Tools	Implement plan for kernel tools	2	Dev (20%)	Bruce/Mark	Bruce	1.2	Yocto 1.2, from 1.1
use cases	BSP config streamlining, building the kernel standalone, yoctoization, meta data sharing	1	Accept	Bruce	Bruce	1.2	Yocto 1.2, from 1.1
kernel bloat - development	target = boot a minimal image in < 8M - development complete	1	Dev	Darren	Darren	1.2	Yocto 1.2, from 1.1, continuation needed?
Fast boot time	2 second boot time target	1	Dev	Team	Darren	1.2	Yocto 1.2, from 1.1, continuation needed?
Upstream config fragments	Work with John Stultz to upstream a Linux kernel config fragment manager and rework the yocto-kernel-tools to use it. This will simplify our tooling and increase our usage/test base.	1	Review	Darren		1.2
Real-time process-executed timers	Timers currently run at the priority of the softirq that processes them and they are accounted to whichever task was preempted for them to run. This negatively impacts determinism and accounting accuracy.	2	Review	Darren		1.2
Define Kernel policy	We need to clearly document kernel policy and make the config fragments reflect it. This will facilitate a more modular approach to building BSP kernel configs, as well as make it clear what can be expected to be supported when running a "linux-yocto kernel".	1	Review	Darren		1.2