Yocto 1.2 Features

Potential Yocto Project 1.2 Features

Yocto Project 1.2 - Target release = April 2012

Yocto Project 1.2 Themes

The topics below are the themes that some members of the team have started brainstorming for Yocto Project v1.2. These will be improved with community input.

Yocto Project 1.2 Objectives

The objectives of the Yocto 1.2 release are to ... [TBD]

Yocto Project 1.2 Theme List

The Yocto Project 1.2 Themes towards the Objectives listed above are:

• Theme 1
• Theme 2
• Theme 3

Process for Entering New Feature Requests

• Create a new entry in the appropriate feature table below (Poky, SDK, Hardware)
  • Suggestion: start by copying an existing request as a template
• Give the feature a short, descriptive name
• Provide a one or two sentence brief description of the feature
• Set the priority as appropriate (see the legend below)
• Set the Status to "Review"
• In the Source field, enter your name along with the origination of the request (e.g. OSV, OEM, Community) if applicable; provide as much detail here as you can
• In the Comments / Bugzilla field, provide any additional information for the request, such as a link to a bugzilla entry
• Preview your Entry to make sure it looks ok and then save it

Legend

Priority: 1 = Must Have, 2 = Nice to Have, 3 = Optional

Status: Accept = Engineering agreement to include in release, Review = Under Review for Inclusion in this release, Reject = Will not be included in this release

Sample Table

This is a sample table to show how to submit features.

Feature Name	Description	Priority	Status	Source	Comments / Bugzilla Links
Placeholder feature name	Placeholder description of the feature	1, 2, or 3	Review	name	Comment

Usebility

Feature Name	Description	Priority	Status	Source	Owner	Comments / Bugzilla Links
build appliance	Intended for developers to very easily "Check it out" and do a Yocto Project build with minimal pain. Should be a virtual image of a desktop OS which will boot into HOB and offer a terminal or an app to deploy resulting images to media or to run QEMU.	1	Review	davest/tracey/RP	TBD	See here for Build Appliance Design
Web Hob	Add a web interface for Hob, perhaps similar to SuSE Studio. This is for both local (non-network) builds as well as network. Would require us to have a web server package installed of course for local builds.	1	Review	davest/tracey/RP	TBD	xx
Hob improvements	Update Hob with performance improvements and improvements to package disabling	1	Review	davest/tracey/RP	TBD	xx
Support for non-developers	Create clear instructions for how a Windows user can take an example image from the YP web site and deploy it to a board. Assume no Linux knowledge. These instructions should be applicable in example images in BSPs	1	Review	davest/tracey/RP	TBD	xx
Firewall / Proxy handling in git	Develop a git plugin which will fall back to tunneling through HTTP if the git:// interface will not work because it is blocked by a firewall and the correct proxy is not set up.	1	Review	davest/tracey/RP	TBD	xx
Build Yocto behind firewall - implementation		2	Dev	Dave	Darren/Joshua	Yocto 1.2, from 1.1, the above one seems to be part of this.

Core/Bitbake

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
Web-based Image Creator	Create a web-based interface that does what the Image Creator does.	2.5	Review	LCS	Jason Kridner?	1.2	Yocto 1.2 - depends on Image Creator completing
Recipe-specific sysroot		3	Review	from 1.0	Saul (Dongxiao)	1.2	Yocto 1.2 (1 month task)
Handle old versions in WORKDIR		3	Review	from 1.0		1.2	Yocto 1.2
Executable images	Create images that are executable - for example a pre-installed Ubuntu image with YP installed	3	Review	LCS		1.2	Yocto 1.2
Self-hosting image	Create customizable chroot; Build an image that would be self-hosting	2.5	Review	LCS		1.2	Yocto 1.2
Yocto OOPS-type messages	add the equivalent of kernel OOPS to Yocto	2.5	Review	LCS		1.2	Yocto 1.2
Reduced depth revision history	Decrease the depth of the revision history	3	Review	LCS		1.2	Yocto 1.2
Ability to archive work dir	Add the ability to archive the work directory to handle the GPL compliance issue.	3	Review	LCS		1.2	Yocto 1.2, On Janitor\'s list

QA Items

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
Patch Test System	Create a machine where developers can upload/test patches before submitting them to master to ensure builds won\'t break when patches are added. (developer autobuilders? Fuzz builds?)	2	Review	Team	Jiajun	1.2
Open Source Test Cases	Perform technical, legal, and QA steps necessary to move test cases into open source.	3	Review	QA		1.2	Yocto 1.2
Start a framework for automated BSP testing	Build-testing is only half the job of BSP testing, and new BSP development is and will be ramping up even more rapidly soon. We need to start building a framework to make as much of this as automated as possible. Phase I, what we can complete for 1.2, should be the ability to load an image from the autobuilder and make it ready for booting, or actually boot it, on a given target. It would be good to use systems running Yocto images as much as possible for this.	2	Review	Tom		1.2
Test framework	this is a test framework that we can include in the distribution	3	Review	RP Notes		1.2	Yocto 1.2 - Is it the TI’s test framework we discussed before? A: Not necessarily, we\'re still waiting for someone to step up and really take ownership of this area but it needs some resource commitment as its not a simple task.

Meta Data

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
Replacement for video/audio players currently in Yocto	Codec…	3	Review	Meta-data		1.2	Yocto 1.2
Investigate New UI	For demos, we would like need a reference UI that is not Sato. Investigate possibilities that the Yocto team won\'t need to maintain. OpenBox? Gnome-desktop? GP? LXDE? KDE Mobile?	3	Review	Meta-data		1.2	Yocto 1.2
Qemugl upstreaming	Opengl ES Support	3	Review	Meta-data		1.2	Yocto 1.2
selinux patch integration	add SE Linux patches in a similar way to PAM	3	Review	Meta-data		1.2	Yocto 1.2
build statistics reporting	As someone interested in how long it takes to build different images on different hardware configurations and other assorted build metrics, I would like a web based service, that takes output generated by an extended buildstats.bbclass and stores it, to compare against different machines. The end result should be a way to visualize the collected data. See: https://wiki.yoctoproject.org/wiki/Yocto_Buildbot_Autobuilder_Discussions	2	M3, Sprint A	eflanagan/Jay7/ka6sox	Beth/Jay	1.2	Yocto 1.2, from 1.1
Framework to support multiple library versions co-existing	similar to recipe specific sysroot; needs documentation	3	Review	Team	Saul (Dongxiao?)	1.2	Yocto 1.2 - we just need to document how to use multiple versions of a library using clutter as the example
Embedded java environment or even JDK support		3	Review	Team		1.2	Yocto 1.2
Target module build	Allow for building kernel modules on the target device	2	Review	RP Notes	Darren	1.2	Yocto 1.2, On Janitor\'s list
gtk+ sato filechooser patch		3	Review	RP Notes		1.2	Yocto 1.2
sato refresh		3	Review	RP Notes		1.2	Yocto 1.2
Sanity checks on per recipe basis		2	Accept	RP Notes Bug#405	Saul (Scott G)	1.2	Yocto 1.2, from 1.1
perf scripting\' integration	Make it easy and convenient for the user to write and execute \'perf scripts\' from the IDE. We should be able to leverage and build on the Systemtap integration for this.	2	Dev	Tom	Jessica/Tom	1.2	Yocto 1.2, from 1.1
Add Directfb（license LGPL） function	Directfb is more appropriate embedded device than other graphic software	3	Moved from M1	Meta-data	WR Distro team	1.2	Yocto 1.2, from 1.1

Autobuilder

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
autobuilder layer support		2		Beth	Beth	1.2	2 weeks
autobuilder split of nightly (really an M4 task) few days license.bbclass refactor		2		Beth	Beth	1.2	1 week
buildstats memory measurements		2		Beth	Beth	1.2	1 week and half
license manifest		2		Beth	Beth	1.2	1 week
autobuilder release checkbox (running a yocto release right from the autobuilder)		2		Beth	Beth	1.2	2 weeks

BSPs

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
AMT driver integration	incorporate Linux AMT into the Yocto BSPs					1.2	Intel
BSP update/intro	determine and integrate / create arch reference BSPs (e500, Cortex, ARM, MIPs)	2	Dev	Bruce/Richard/team	Bruce	1.2	Yocto 1.2, from 1.1

ADT

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
Enhance the deploy part in remote debug	ADT is currently using org.eclipse.cdt.remote.launch for remote debug. One limitation in this plug-in is that it can only deploy one single file to the target during the debug. Though it is ok for debugging static linked program, debugging dynamic linked program might require deploying multiple files(including executables and libraries) to the target.	2	Review	Lianhao	Jessica	1.2
Secure login		2	Review	ADT Team	Jessica	1.2	Yocto 1.2
Prebuit SDK integration	speedup target image generation by reusing prebuilt tools from SDK native and target binaries. See: http://wiki.secretlab.ca/Yocto_prebuilt_SDK_integration	2	Reject	Adrian	Jessica	1.2	Yocto 1.2 - This functionality looks to have been provided by sstate packages?

Documentation

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
Various Demo Videos	The idea here is to create screen-capture type tutorials similar to what exists for the ADT Eclipse Plug-in. However, we want to contract out some help for professional voice-over talent to be used with the images. These don\'t have to be limited to screen-capture material but could include well-done PPT decks - similar to how other business units in Intel create various training modules. For 1.1 it would be good to capture the script for the existing ADT Eclipse Plug-in module and have it voiced over. Also, for 1.1 it would be good to create a similar module for the Image Creator application.	2	Not Started	From ADT module and scratch	ScottR	1.2	Q3 at the earliest

Performance & usability

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
POSIX support	address POSIX failures found in 1.1	2	Review	Team		1.2	Yocto 1.2, On Janitor\'s list

Kernel

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
Minimal Image unique	make minimal image smaller	3	Accept	Team	WR Distro Team	1.2	Yocto 1.2, from 1.1
Tracing: tuna, oscilloscope recipes	This might be more useful with the increased importance of RT	3	Review	from 1.0		1.2	Yocto 1.2
Kernel Tools	Implement plan for kernel tools	2	Dev (20%)	Bruce/Mark	Bruce	1.2	Yocto 1.2, from 1.1
use cases	BSP config streamlining, building the kernel standalone, yoctoization, meta data sharing	1	Accept	Bruce	Bruce	1.2	Yocto 1.2, from 1.1
kernel bloat - development	target = boot a minimal image in < 8M - development complete	1	Dev	Darren	Darren	1.2	Yocto 1.2, from 1.1, continuation needed?
Fast boot time	2 second boot time target	1	Dev	Team	Darren	1.2	Yocto 1.2, from 1.1, continuation needed?

Project-wide Features

Feature Name	Description	Priority	Status	Source	Owner	Due	Comments / Bugzilla Links
LayerTooling – remote layer tool	Consider integrating Jeremy Puhlman\'s remote layers patch	2	Community	Paul	1.2
running post installs at rootfs gen time		2	Review	RP Notes	Saul (Dexuan)	1.2
Clean up warning messages	A build that runs correctly to completion still includes a ton of WARNING messages. We need a project to clean these up. Beth will work on License Warnings, team will look at other logfile warnings	2	Review	Dave & RP	Saul	1.2
Multi-lib - 11	Directly support multlibs within the toolchain itself [post 1.1]	2		RP	Ke	1.2
Multi-lib - 8	Add support to RPM packaging backend to turn modified package names into true rpm multilib packages	1		RP	Mark	1.2
Multi-lib - 7	Investigate better TARGET_VENDOR handling for config.sub. Currently we can only have ARCH-VENDOR-linux where VENDOR cannot contain \"-\" but it might be possible to relax that constraint [not high priority].	2	Review	RP	Ke	1.2
Multi-lib - 6	Create some \"standard\" multilib configurations (x86 32+64 bit)	1	Review	RP	Ke	1.2
Patchwork	is it worth the overhead, are there alternatives	3	Review	RP Notes		1.2	Yocto 1.2
Bugzilla to Wiki	Create a script which automatically populates and updates the Wiki based on changes in bugzilla.	2.5	Review	Darren		1.2	Yocto 1.2
Sync qemugl with MeeGo - Implementation	sync qemugl with MeeGo is complete	2	Dev (70%)	Meta-data	Saul (Edwin)	1.2	Yocto 1.2, from 1.1
Tracing/profiling HOWTOs	Create a document or extend the current Yocto tracing wiki page to explain in detail how to use all the tracing tools in Yocto. It should detail not only how to use each tool individually, but also how to use them in conjunction with each other, highlighting situations in which each is most useful. There should also be some extensive worked examples of real-life use-cases and how they could be investigated using the Yocto tracing/profiling tools.	2	Accept	Tom	Tom	1.2	Yocto 1.2, from 1.1
Error handling in bitbake (Implementation): Stage 2	Performance improvement (gather input from community on use cases)	1	Dev	RP Notes	Saul (Scott G)	1.2	Yocto 1.2, from 1.1
btrfs	Kernel enabling	2	Dev	Meta-data	Saul (Nitin)	1.2	Yocto 1.2, from 1.1
replace qemuppc					Bruce	1.2	Come from bug 414
MeeGo GPLv2 Sync	compare with Yocto, sync any patches	2	Accept	RP Notes	Saul (Ke)	1.2	Yocto 1.2, from 1.1
Package Documentation Audit: All recipes build	31 recipes were identified as not building during the package documentation audit done in M1, Sprint B. Those all need to build and we need to re-run a new package documentation audit.	2	Accept	Team	Scott G	1.2	Yocto 1.2, from 1.1
Tracing: Systemtap usability in Yocto	Right now, there are instructions on the wiki on how to configure and use Systemtap with Yocto. While straightforward, they are tedious and unlikely to be useful to most people pressed for time. We need to make it easier to use - in addition to documentation/HOWTO tasks listed elsewhere on this page, we need to make it usable \'out of the box\' (i.e. outside of ADT) e.g. all paths and configuration handled via script or something similar	2	Accept	Tom	Tom	1.2	Yocto 1.2, from 1.1
Tracing: create separate recipe for perf	Perf is currently built as part of the kernel build. If we want to make use of everything perf has to offer we should get rid of the dependency. For example, the kernel build shouldn\'t depend on libnewt, and x32 shouldn\'t have to deal with embedded Python	2	Review	Tom	Tom	1.2
Tracing: perf trace scripting support	Basically this means allowing perf to be built with the Perl and Python bindings, which turned out to be a headache last time.	2	Dev (50%)	from 1.0	Tom	1.2	Yocto 1.2, from 1.1
Monitor disk availability	Monitor disk availability and warn the user if it is running low. May only focus on a few directories, for example: poky/build and poky/build/downloads, this would solve the multiple mount point problem	2	Review	RP and Robert	WR Distro Team (Robert)	1.2	Yocto 1.2, from 1.1
Ability to build SRPM		3	Accept	RP Notes	Jeff Polk/Mark	1.2	Yocto 1.2, from 1.1
Classes to help install binary packages	It\'s been suggested that it would be a useful feature to be able to easily take an RPM or similar containing a software binary from a 3rd party software vendor and integrate it into an image created by the build system.	2	Review			1.2
Host intrusion prevention	We have Swabber but it\'s not integrated into our process. I believe this is because there are several recipes which don\'t work when run under strace with parallelisation. We should determine a path for inclusion of swabber into our process and execute on it so that we can be aware of, and fix, any host intrusion issues.	2	Review			1.2
Security layer	Many of our users are likely to want to use kernel level security mechanisms and so I\'d like to investigate supporting one of the in-kernel LSM (Linux Security Modules), possibly SMACK as used in MeeGo, and adding policy to the oe-core metadata. The LSM, policy and user-space tools could all be enabled via a distro feature. This work may well want to be in a separate layer?	2	Review	Joshua		1.2
Factory reset	Implement a factory reset image feature. We\'ll use one of the union mount technologies (aufs/overlayfs/union mounts) to create an overlay on the file system as the final piece of rootfs creation. The overlaid file-system will be the target of all writes made to the image after the image is generated. A user-space mechanism to disable the overlay, and therefore reset to the state of the image just after it was created, will also be provided. This feature could be further enhanced by integrating with the package manager, and other user-space switches, to create system restore points which can later be rolled back to.	2	Review	Joshua		1.2
Gstreamer	Refactor gstreamer recipes to better support COMMERCIAL_LICENSE and enabling/disabling of various codecs and features	2	Review			1.2	http://bugzilla.pokylinux.org/show_bug.cgi?id=923
Init	Interest in systemd as a replacement for Sys V init is growing but it may not be appropriate for deeply embedded systems. I\'d like to investigate a crop of service based and process monitoring init systems and compare them on a variety of criteria as determined by the community. Furthermore I would like to investigate supporting multiple init systems, the current SysV system, systemd and possibly others. As part of this work, and because increasingly many upstreams support systemd (no doubt thanks to its adoption in Fedora) I would like to investigate implementing some infrastructure which translates from systemd units to the appropriate init format for the supported init systems.	2	Review			1.2
Enhance Automated QA Tests	Add tests for the RT pieces, consider run-time security checking tools used by Fedora and Gentoo	2	Review			1.2
Collect data at build time to increase accuracy of estimation (hob)	Collect data at build time to allow hob to: predict the size of the generated image, more accurately reflect the built image contents, etc. This will likely involve generating data on the autobuilder which the UI can fetch and consume (with local caching for offline usage)	2	Review			1.2	http://bugzilla.pokylinux.org/show_bug.cgi?id=1316
Finish and enable PR server	We\'re still seeing people being forced to cleansstate too often, we need to finish up and enable the PR server so the checksummed sstate future can live	2	Review			1.2	http://thread.gmane.org/gmane.comp.handhelds.openembedded.core/1272/focus=1357 http://thread.gmane.org/gmane.comp.handhelds.openembedded.core/835/focus=852
Provide a click through license mechanism	Implement the mechanism described in Section 1.2. BSP \'Click-Through\' Licensing Procedure in the BSP Developer\'s Guide	2	Review	Tom	Tom	1.2
Finish Oracle/Sun Hotspot JDK/JRE support	I created an initial hack of a recipe for this for the demo - finish it up (involves licensing issues (click-through license support would be a prerequisite) as well)	2	Review	Tom	Tom	1.2	50% done already
BSPs or layers for a specific category of devices	This will demonstrate the value of Yocto to developers and help them get up to speed quicker for this category of devices.	2	Review	Dirk/Dave/Andy	TBD	1.2