View source for Yocto1.1-M1-RC2

{|border="1"
||'''Tree'''|| Poky
|-
||'''Branch'''  || 1.1_M1
|-
||'''Commit'''  || 4ff7af11ef69849ef9c16f585eae58ac920b222b
|-
||'''Author'''  || Saul Wold <sgw@linux.intel.com>
|-
||'''Date'''    || Saul Wold <sgw@linux.intel.com>
|-
!colspan="6"|Information
|-
|colspan="2"|documentation/adt-manual/adt-prepare.xml: Added instruction for building ADT
I added a note in the "Installing the ADT" section (2.1)
saying that if you need to build the ADT tarball you can use'bitbake adt-installer'.  
I also changed the location of the toolchain from '...yocto-0.9' to '...yocto-1.0'.  
Finally,I changed the host sub-directory in the toolchain directory from 'i586' to i686'.

(From OE-Core rev: 18124c5065fc570e672d068e915e0f476d20379c)

Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>