Yocto 1.2 Features

From Yocto Project
Revision as of 18:01, 4 October 2011 by Joshual (talk | contribs) (→‎BSPs: device management)
Jump to navigationJump to search

Potential Yocto Project 1.2 Features

Yocto Project 1.2 - Target release = April 2012

Yocto Project 1.2 Themes

The topics below are the themes that some members of the team have started brainstorming for Yocto Project v1.2. These will be improved with community input.

Yocto Project 1.2 Objectives

The objectives of the Yocto 1.2 release are to increase adoption of the Yocto Project.

Yocto Project 1.2 Theme List

The Yocto Project 1.2 Themes towards the Objectives listed above are:

  • Improved usability of the build system for new experienced users, new novice users and existing users.

Process for Entering New Feature Requests

  • Create a new entry in the appropriate feature table below (Poky, SDK, Hardware)
    • Suggestion: start by copying an existing request as a template
  • Give the feature a short, descriptive name
  • Provide a one or two sentence brief description of the feature
  • Set the priority as appropriate (see the legend below)
  • Set the Status to "Review"
  • In the Source field, enter your name along with the origination of the request (e.g. OSV, OEM, Community) if applicable; provide as much detail here as you can
  • In the Comments / Bugzilla field, provide any additional information for the request, such as a link to a bugzilla entry
  • Preview your Entry to make sure it looks ok and then save it

Legend

Priority: 1 = Must have, 2 = Nice to have but wouldn't block a release, 3 = Lower priority, desired, defined plan, 4 = Worthwhile ideas, no defined plan

Status: Accept = Engineering agreement to include in release, Review = Under Review for Inclusion in this release, Reject = Will not be included in this release

Sample Table

This is a sample table to show how to submit features.

Feature Name Description Priority Status Source Comments / Bugzilla Links
Placeholder feature name Placeholder description of the feature 1, 2, or 3 Review name Comment

Usability

Feature Name Description Priority Status Source Owner Comments / Bugzilla Links
Build Appliance: Pre-configured VM Build image built by Yocto 1 Review davest/tracey/RP TBD http://bugzilla.yoctoproject.org/show_bug.cgi?id=1557
Hob v2 - Interface updates? 1 Review davest/tracey/RP TBD http://bugzilla.yoctoproject.org/show_bug.cgi?id=1588
Hob improvements 1 Review davest/tracey/RP TBD http://bugzilla.yoctoproject.org/show_bug.cgi?id=1559
Improve user experience under Windows 1 Review davest/tracey/RP TBD http://bugzilla.yoctoproject.org/show_bug.cgi?id=1586
Firewall / Proxy handling in git 2 Review davest/tracey/RP TBD http://bugzilla.yoctoproject.org/show_bug.cgi?id=1585
Error Handling Improvements 1 Dev Saul (Scott G) http://bugzilla.yoctoproject.org/show_bug.cgi?id=1543

Core/Bitbake

Feature Name Description Priority Status Source Owner Due Comments / Bugzilla Links
Recipe-specific sysroot 3 Review from 1.0 Saul (Dongxiao) 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1560
Handle old versions in WORKDIR 3 Review from 1.0 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1561
Build Appliance: Pre-configured VM Build image (desktop Linux OS) 3 Review LCS 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1558
Yocto OOPS-type messages 2.5 Review LCS 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1562
Ability to archive work dir 3 Review LCS 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1590
Make BasicHash the default 2 Review RP http://bugzilla.yoctoproject.org/show_bug.cgi?id=1555
Address git fetcher mirror issues 2 Review RP http://bugzilla.yoctoproject.org/show_bug.cgi?id=1511
Support for remote layers 2 Community Paul 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1598
Disk space monitoring 2 Review RP and Robert WR Distro Team (Robert) 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1589
Ability to build SRPM 3 Accept RP Notes Jeff Polk/Mark 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1591
Binary package install class 2 Review 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1592
Host intrusion prevention/Swabber 3 Review 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1582
Finish and enable PR server 2 Review 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1126
Recipe specific configuration (e.g. Gstreamer) 2 Review 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=923

QA Items

Feature Name Description Priority Status Source Owner Due Comments / Bugzilla Links
Open Source Test Cases 3 Review QA 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1595
Automate BSP Testing 2 Review Tom 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1596
Test framework 4 Review RP Notes 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1594
Package History 1 Review RP 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1565
Package History Analysis Tool 1 Review RP 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1566
QA Tests: Add recipe for LSB Tests and automate test 2 Review 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1567
QA Tests: Add recipe for posix Tests and automate test 2 Review 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1568
QA Tests: Add recipe for rt Tests and automate test 2 Review 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1569
QA Test improvements - consider fedora/gentoo runtime security tools 3 Review 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1584
Collect data at build time to increase accuracy of estimation (hob) 2 Review 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1316

Core Meta Data

Feature Name Description Priority Status Source Owner Due Comments / Bugzilla Links
Investigate New UI 3 Review Meta-data 1.2 http://bugzilla.pokylinux.org/show_bug.cgi?id=1606
selinux patch integration add SE Linux patches in a similar way to PAM 3 Review Meta-data 1.2 Yocto 1.2
build statistics reporting As someone interested in how long it takes to build different images on different hardware configurations and other assorted build metrics, I would like a web based service, that takes output generated by an extended buildstats.bbclass and stores it, to compare against different machines. The end result should be a way to visualize the collected data. See: https://wiki.yoctoproject.org/wiki/Yocto_Buildbot_Autobuilder_Discussions 2 M3, Sprint A eflanagan/Jay7/ka6sox Beth/Jay 1.2 Yocto 1.2, from 1.1
Document multiple library versions co-existing 3 Review Team Saul (Dongxiao?) 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1548
Embedded java environment or even JDK support 3 Review Team 1.2 Yocto 1.2
Target module build Allow for building kernel modules on the target device 2 Review RP Notes Darren 1.2 Yocto 1.2, On Janitor\'s list
gtk+ sato filechooser patch 3 Review RP Notes 1.2 Yocto 1.2
Sanity checks on per recipe basis 2 Accept RP Notes Bug#405 Saul (Scott G) 1.2 Yocto 1.2, from 1.1
perf scripting\' integration Make it easy and convenient for the user to write and execute \'perf scripts\' from the IDE. We should be able to leverage and build on the Systemtap integration for this. 2 Dev Tom Jessica/Tom 1.2 Yocto 1.2, from 1.1
Package Documentation Audit: All recipes build 31 recipes were identified as not building during the package documentation audit done in M1, Sprint B. Those all need to build and we need to re-run a new package documentation audit. 2 Accept Team Scott G 1.2 Yocto 1.2, from 1.1
Parallel Locale Generation 2 Review RP http://bugzilla.yoctoproject.org/show_bug.cgi?id=1554
Clean up warning messages 2 Review Saul 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1544
Multilib: Enhance gcc recipe to support multilibs 2 RP Ke 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1549
Multilib: Complete recipe enablement 2 RP Ke 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1563
Multilib: Drop MULTILIB_IMAGE_INSTALL 2 RP Ke 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1564
Enhance TARGET_VENDOR field support 3 Review RP Ke 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1550
MeeGo GPLv2 Sync compare with Yocto, sync any patches 2 Accept RP Notes Saul (Ke) 1.2 Yocto 1.2, from 1.1
Finish Oracle/Sun Hotspot JDK/JRE support I created an initial hack of a recipe for this for the demo - finish it up (involves licensing issues (click-through license support would be a prerequisite) as well) 2 Review Tom Tom 1.2 50% done already
running post installs at rootfs gen time 2 Review RP Notes Saul (Dexuan) 1.2
Multi-lib - 6 Create some \"standard\" multilib configurations (x86 32+64 bit) 1 Review RP Ke 1.2
POSIX support address POSIX failures found in 1.1 2 Review Team 1.2 Yocto 1.2, On Janitor\'s list
License file cleanup 2 Beth Beth 1.2 1 week http://bugzilla.yoctoproject.org/show_bug.cgi?id=1547
QEMU GL Enhancements These include syncing sync qemugl with other projects (e.g. MeeGo?, Android?). Ideally we'd be working on a solution which could be submitted and accepted by upstream QEMU. Also need to consider GLES support. 2 Meta-data Saul (Edwin) 1.2
Implement Factory reset 4 Review Joshua 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1593
Init Interest in systemd as a replacement for Sys V init is growing but it may not be appropriate for deeply embedded systems. I\'d like to investigate a crop of service based and process monitoring init systems and compare them on a variety of criteria as determined by the community. Furthermore I would like to investigate supporting multiple init systems, the current SysV system, systemd and possibly others. As part of this work, and because increasingly many upstreams support systemd (no doubt thanks to its adoption in Fedora) I would like to investigate implementing some infrastructure which translates from systemd units to the appropriate init format for the supported init systems. 2 Review 1.2

Other Layer Meta Data

Feature Name Description Priority Status Source Owner Due Comments / Bugzilla Links
x32 Enhancements 2 Review 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1579
BSPs or layers for a specific category of devices This will demonstrate the value of Yocto to developers and help them get up to speed quicker for this category of devices. 2 Review Dirk/Dave/Andy TBD 1.2
Security layer 4 Review Joshua 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1597

Infrastructure

Feature Name Description Priority Status Source Owner Due Comments / Bugzilla Links
autobuilder layer support 2 Beth Beth 1.2 2 weeks
autobuilder split of nightly (really an M4 task) few days license.bbclass refactor 2 Beth Beth 1.2 1 week
buildstats memory measurements 2 Beth Beth 1.2 1 week and half
autobuilder release checkbox (running a yocto release right from the autobuilder) 2 Beth Beth 1.2 2 weeks
Eval Patch management tools Consider patchwork, gerrit and others and see if they help. Any other alternatives? 3 Review RP Notes 1.2 Yocto 1.2
Bugzilla to Wiki Create a script which automatically populates and updates the Wiki based on changes in bugzilla. 2.5 Review Darren 1.2 Yocto 1.2
Provide a click through license mechanism Implement the mechanism described in Section 1.2. BSP \'Click-Through\' Licensing Procedure in the BSP Developer\'s Guide 2 Review Tom Tom 1.2

BSPs

Feature Name Description Priority Status Source Owner Due Comments / Bugzilla Links
AMT driver integration incorporate Linux AMT into the Yocto BSPs 1.2 Intel
Improve device management Joshua/Darren 1.2 http://bugzilla.pokylinux.org/show_bug.cgi?id=1608
BSP update/intro determine and integrate / create arch reference BSPs (e500, Cortex, ARM, MIPs) 2 Dev Bruce/Richard/team Bruce 1.2 Yocto 1.2, from 1.1
Drop Grub for Syslinux Grub is considerably more complicated than we need for any of our current BSPs. Syslinux can be used in place of every known usage of Grub. For upcoming EFI BSPs, we can look to Efilinux. This will reduce our bootloader maintenance burden and simplify our images. 2 Review Darren Darren 1.2
Upgrade to EFI Where possible, update our existing BSPs to boot using EFI. This will support development of efilinux as well as help us prepare for the newer boards which will be EFI only. 2 Review Darren Darren 1.2
BSP/kernel wrappers/wizards Create some simple scripts or 'wizards' that make it easy for users to start writing a new BSP and/or easily make simple kernel modifications to a BSP. Ideally, users shouldn't need to know anything low-level about the kernel, git, or the mechanics of appending config items to recipes in order to get a BSP up and running or to make the simple modifications needed to tweak or maintain it. 2 Review tomz tomz 1.2
replace qemuppc Bruce 1.2 Come from bug 414

ADT / Tools and Support

Feature Name Description Priority Status Source Owner Due Comments / Bugzilla Links
Enhance the deploy part in remote debug 2 Review Lianhao Jessica 1.2 http://bugzilla.pokylinux.org/show_bug.cgi?id=1600
Secure login 2 Review ADT Team Jessica 1.2 http://bugzilla.pokylinux.org/show_bug.cgi?id=1601
Linux tools upstream integration 2 Review ADT Team Jessica 1.2 http://bugzilla.pokylinux.org/show_bug.cgi?id=1602
Add recipe supporting autoconf-nativesdk and automake-nativesdk 2 Review Lianhao 1.2 http://bugzilla.pokylinux.org/show_bug.cgi?id=1603
Eclipse BSP/Kernel Plugin Provide an Eclipse plugin to facilitate configuring new BSPs and streamlining the linuix-yocto development workflow. 2 Review Darren 1.2
enhance the bitbake commander eclipse plugin By having the Eclipse as a frontend UI to bitbake server, eclipse may talk to bitbake server, enable the user to glimpse on the variables' values when editing the recipes, try out building the recipe being edited, etc. 2 Review Dongxiao/Lianhao TBD TBD This requires new features both in eclipse plugin and bitbake server.
Tracing: tuna, oscilloscope recipes This might be more useful with the increased importance of RT 3 Review from 1.0 1.2 Yocto 1.2
Tracing/profiling HOWTOs Create a document or extend the current Yocto tracing wiki page to explain in detail how to use all the tracing tools in Yocto. It should detail not only how to use each tool individually, but also how to use them in conjunction with each other, highlighting situations in which each is most useful. There should also be some extensive worked examples of real-life use-cases and how they could be investigated using the Yocto tracing/profiling tools. 2 Accept Tom Tom 1.2 Yocto 1.2, from 1.1
Profiling: Valgrind tools in Eclipse 2 Accept Dave/JZ 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1580
Tracing: Systemtap usability in Yocto 2 Accept Tom Tom 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1551
Tracing: create separate recipe for perf 2 Review Tom Tom 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1552
Tracing: perf trace scripting support 2 Dev (50%) from 1.0 Tom 1.2 http://bugzilla.yoctoproject.org/show_bug.cgi?id=1553

Documentation

Feature Name Description Priority Status Source Owner Due Comments / Bugzilla Links
Various Demo Videos The idea here is to create screen-capture type tutorials similar to what exists for the ADT Eclipse Plug-in. However, we want to contract out some help for professional voice-over talent to be used with the images. These don\'t have to be limited to screen-capture material but could include well-done PPT decks - similar to how other business units in Intel create various training modules. For 1.1 it would be good to capture the script for the existing ADT Eclipse Plug-in module and have it voiced over. Also, for 1.1 it would be good to create a similar module for the Image Creator application. 2 Not Started From ADT module and scratch ScottR 1.2 Q3 at the earliest

Kernel

Feature Name Description Priority Status Source Owner Due Comments / Bugzilla Links
Minimal Image unique make minimal image smaller 3 Accept Team WR Distro Team 1.2 Yocto 1.2, from 1.1
Kernel Tools Implement plan for kernel tools 2 Dev (20%) Bruce/Mark Bruce 1.2 Yocto 1.2, from 1.1
use cases BSP config streamlining, building the kernel standalone, yoctoization, meta data sharing 1 Accept Bruce Bruce 1.2 Yocto 1.2, from 1.1
kernel bloat - development target = boot a minimal image in < 8M - development complete 1 Dev Darren Darren 1.2 Yocto 1.2, from 1.1, continuation needed?
Fast boot time 2 second boot time target 1 Dev Team Darren 1.2 Yocto 1.2, from 1.1, continuation needed?
Upstream config fragments Work with John Stultz to upstream a Linux kernel config fragment manager and rework the yocto-kernel-tools to use it. This will simplify our tooling and increase our usage/test base. 1 Review Darren 1.2
Real-time process-executed timers Timers currently run at the priority of the softirq that processes them and they are accounted to whichever task was preempted for them to run. This negatively impacts determinism and accounting accuracy. 2 Review Darren 1.2
Define Kernel policy We need to clearly document kernel policy and make the config fragments reflect it. This will facilitate a more modular approach to building BSP kernel configs, as well as make it clear what can be expected to be supported when running a "linux-yocto kernel". 1 Review Darren 1.2