Yocto 1.1 Milestone Test Report: Difference between revisions

From Yocto Project
Jump to navigationJump to search
No edit summary
No edit summary
Line 1: Line 1:
This page is to hold Milestone Test Report for Yocto 1.1
This page is to hold Milestone Test Report for Yocto 1.1
==== Yocto 1.1 M2 RC2 Weekly Test Report ====
'''pdf format test report could be found @ [[File:Weekly_Test_Report_for_Yocto_1.1_M2_RC2_-_20110708.pdf‎]]'''
Hi, All,
This is the weekly test report for Yocto 1.1 M2 RC2 20110708 build. Since all lsb build failed on autobuilder, jasperforest testing is performed against sato-sdk. There are 5 new bugs found in this testing. All compile testing is blocked due to gcc/g++ could not work with a .so file missing. 3D testing is blocked on sugarbay because of a eglic bug. glxinfo and glxgears commands are found not work on emenlow. ldd on x86_64 platform could not work due to wrong path for ld.so.
For other open bug, the X server start up failure issue still exists on crownbay. We have updated bug 1211, which is for psplash instead of X server. The rpm/zypper install/removal consume disk space issue still exists.
For bug fixing, the 2 installation issues have been fixed. Bash missing issue is fixed also. cvs configure issue is fixed for mips toolchain
Note:For different images, they are built against different commit/branch on autobuilder. You can refer to “Commit Information” section for detailed information.
The test report is archived @ https://wiki.pokylinux.org/wiki/Yocto_1.1_Milestone_Test_Report
'''Test Summary'''
[[File:Yocto_1.1_M2_RC2_Test_Result_Summary.JPG]]
[[File:Yocto_1.1_M2_RC2_Detailed_Test_Result.JPG]]
* You can check the detailed test result in attachment for each target.
* The failed/blocked case number is listed with failed cases’ bug number.
'''Commit Information:'''
For Emenlow/Blacksand/Crownbay/Sugarbay/Toolchain/Qemex86/Qemux86-64
Tree/Branch: Poky/1.1_M2
Poky Commit id: 8df2a558b4d61778a669705b867969abe3514846
Meta Branch : 1.1_M2
Meta Commit id : 92fc07a5f1b98779806cdcc2341487ff5ea5a238
For qemuarm/mips/ppc/beagleboard/mpc8315e-rdb/routerstationpro:
Tree/Branch: Poky/1.1_M2
Poky Commit id: 9f4eaeef33da5595748253d59d95c7ca548e28fa
'''Issue Summary:'''
[[File:Yocto_1.1_M2_RC2_Issue_Summary.JPG]]
'''Verified Fixed Bug:'''
1. Bug 1099 - [blacksand/emenlow/crownbay] grub install failed with sato-sdk live image
2. Bug 1171 - No enough disk space with qemu sato images
3. Bug 1195 - [mips toolchain] cvs configure fail with no cvs_cv_func_printf_ptr set
4. Bug 1199 - qemuppc lsb-sdk rootfs image build failed on autobuilder in nightly build 20110625-1
5. Bug 1205 - [blacksand/emenlow/crownbay] Format swap partition failed when install
6. Bug 1214 - [Emenlow/Blacksand/Crownbay/Sugarbay] No bash exist in sato-sdk image


==== Yocto 1.1 M2 RC1 Weekly Test Report ====
==== Yocto 1.1 M2 RC1 Weekly Test Report ====

Revision as of 09:08, 13 July 2011

This page is to hold Milestone Test Report for Yocto 1.1

Yocto 1.1 M2 RC2 Weekly Test Report

pdf format test report could be found @ File:Weekly Test Report for Yocto 1.1 M2 RC2 - 20110708.pdf

Hi, All, This is the weekly test report for Yocto 1.1 M2 RC2 20110708 build. Since all lsb build failed on autobuilder, jasperforest testing is performed against sato-sdk. There are 5 new bugs found in this testing. All compile testing is blocked due to gcc/g++ could not work with a .so file missing. 3D testing is blocked on sugarbay because of a eglic bug. glxinfo and glxgears commands are found not work on emenlow. ldd on x86_64 platform could not work due to wrong path for ld.so. For other open bug, the X server start up failure issue still exists on crownbay. We have updated bug 1211, which is for psplash instead of X server. The rpm/zypper install/removal consume disk space issue still exists. For bug fixing, the 2 installation issues have been fixed. Bash missing issue is fixed also. cvs configure issue is fixed for mips toolchain Note:For different images, they are built against different commit/branch on autobuilder. You can refer to “Commit Information” section for detailed information. The test report is archived @ https://wiki.pokylinux.org/wiki/Yocto_1.1_Milestone_Test_Report


Test Summary

File:Yocto 1.1 M2 RC2 Test Result Summary.JPG

File:Yocto 1.1 M2 RC2 Detailed Test Result.JPG

  • You can check the detailed test result in attachment for each target.
  • The failed/blocked case number is listed with failed cases’ bug number.


Commit Information:

For Emenlow/Blacksand/Crownbay/Sugarbay/Toolchain/Qemex86/Qemux86-64

Tree/Branch: Poky/1.1_M2

Poky Commit id: 8df2a558b4d61778a669705b867969abe3514846

Meta Branch : 1.1_M2

Meta Commit id : 92fc07a5f1b98779806cdcc2341487ff5ea5a238

For qemuarm/mips/ppc/beagleboard/mpc8315e-rdb/routerstationpro:

Tree/Branch: Poky/1.1_M2

Poky Commit id: 9f4eaeef33da5595748253d59d95c7ca548e28fa


Issue Summary:

File:Yocto 1.1 M2 RC2 Issue Summary.JPG


Verified Fixed Bug:

1. Bug 1099 - [blacksand/emenlow/crownbay] grub install failed with sato-sdk live image

2. Bug 1171 - No enough disk space with qemu sato images

3. Bug 1195 - [mips toolchain] cvs configure fail with no cvs_cv_func_printf_ptr set

4. Bug 1199 - qemuppc lsb-sdk rootfs image build failed on autobuilder in nightly build 20110625-1

5. Bug 1205 - [blacksand/emenlow/crownbay] Format swap partition failed when install

6. Bug 1214 - [Emenlow/Blacksand/Crownbay/Sugarbay] No bash exist in sato-sdk image


Yocto 1.1 M2 RC1 Weekly Test Report

pdf format test report could be found @ File:Weekly Test Report for Yocto 1.1 M2 RC1 - 20110701.pdf

Hi, All, This is the weekly test report for Yocto 1.1 M2 RC1 build. There are 2 new BLOCK bugs and 1 new NORMAL bug found in this testing. All BSP sato-sdk images have no bash built-in, which makes some bash based command not work. X server fails to start up on crownbay emgd and blacksand. And we find basic image build for qemux86 fails due to lack of locale-base-en-us. For old bugs, qemumips and qemuppc lsb images build still failed on autobuilder. mkswap issue during installation fixing patch has not been included in this build. The rpm/zypper install/removal consume disk space issue also exists.

For bug fixing, login.defs issue and no libXinerama.so for sudoku issue on jasperforest have been fixed.

Note: For different images, they are built against different commit/branch on autobuilder. So pls. check following “Commit Information” section for detailed information. The test report is archieved @ https://wiki.pokylinux.org/wiki/Yocto_1.1_Milestone_Test_Report

Test Summary

Yocto 1.1 M2 RC1 Test Result Summary.JPG

Yocto 1.1 M2 RC1 Detailed Test Result.JPG

  • You can check the detailed test result in attachment for each target.
  • The failed/blocked case number is listed with failed cases’ bug number.


Commit Information:

For Emenlow/Blacksand/Crownbay/toolchain:

Tree/Branch : Poky/master

Poky Commit id : ad2363278f0ea86fcf3464f8f6073d3a3d06be63

Meta Branch : master

Meta Commit id: 92fc07a5f1b98779806cdcc2341487ff5ea5a238


For Sugarbay/Jasperforest/qemux86/qemux86-64:

Tree/Branch : Poky/1.1_M2

Poky Commit id : ea518846b889a1bad2263d1cb49cb238a295a8e7

Meta Branch : master

Meta Commit id: 92fc07a5f1b98779806cdcc2341487ff5ea5a238


For qemuarm/mips/ppc/beagleboard/mpc8315e-rdb/routerstationpro:

Tree/Branch : Poky/master

Poky Commit id : 8511d1ec1bac699c742952e6fe4c306e1aaa2f9f


Issue Summary:

Yocto 1.1 M2 RC1 Issue Summary.JPG


Yocto 1.1 M1 RC2 Fullpass Test Report

pdf format test report could be found @ File:Fullpass Test Report for Yocto 1.1 M1 RC2 - 20110528l.pdf

This is the fullpass test report for Yocto 1.1 M1 RC2 build. There are 3 new bugs found in this testing compared with weekly testing. Non-GPLv3 build could not work and one new LTP failure found with new kernel. The 2 BLOCK issues on have been addressed and a new build is ready for QA testing. Except for LTP and POSIX failures, there are 13 open bugs for RC2 build. Grub installation fails on 3 intel BSPs. Graphics testing on sugarbay is blocked because there are no mesa-demos and libSDL.so installed.

Helltest and Crashme could pass 24 hours testing on Jasperforest. Idle power consumption of sugarbay and crownbay are 40.12W and 18.72W respectively. LTP and POSIX testing is finished but the result analysis is still on-going.

Test Summary:

Yocto 1.1 M1 RC2 Test Result Summary1.png

Yocto 1.1 M1 RC2 Detailed Test Result1.png

  • You can check the detailed test result in attachment for each target.
  • The failed/blocked case number is listed with failed cases’ bug number.


Commit Information:

Tree/Branch: Poky/1.1_M1

Poky Commit: 4ff7af11ef69849ef9c16f585eae58ac920b222b

Meta Branch: 1.1_M1

Meta Commit: fc719f0cd6530ce15148b4aa274f1644b461b298


Beagbleboard base on another commit

Beagleboard Commit Information:

Tree/Branch: Poky/1.1_M1

Poky Commit: b4a215bd94cf1508782e49b1a3f8c6b1f7effbb9


Issue Summary:

Yocto 1.1 M1 RC2 Issue Summary1.png