Transcript: from git checkout to qemu desktop: Difference between revisions

From Yocto Project
Jump to navigationJump to search
No edit summary
No edit summary
 
(One intermediate revision by the same user not shown)
Line 125: Line 125:
Change only the following variables in local.conf, it makes the build go faster depending on how many CPUs you have.  I have 4, with HT, so I'm changing my values to 8:
Change only the following variables in local.conf, it makes the build go faster depending on how many CPUs you have.  I have 4, with HT, so I'm changing my values to 8:
   
   
  trz@elmorro:/usr/local/src/Yocto/build/conf$ '''emacs -nw local.conf'''
  trz@elmorro:/usr/local/dev/Yocto/build/conf$ '''emacs -nw local.conf'''
  BB_NUMBER_THREADS = "8"
  BB_NUMBER_THREADS = "8"
  PARALLEL_MAKE = "-j 8"
  PARALLEL_MAKE = "-j 8"
   
   
Since this is your first build, it won't matter - it will take awhile regardless, but for later builds, to avoid re-downloading all the packages again, you can point the DL_DIR variable in local conf to the downloads dir of a previous build.  Continuing the session...
Since this is your first build, it won't matter - it will take awhile regardless, but for later builds, to avoid re-downloading all the packages again, you can point the DL_DIR variable in local conf to the downloads dir of a previous build.  Continuing the session...
trz@elmorro:/usr/local/dev/Yocto/build/conf$ cd /usr/local/dev/Yocto
trz@elmorro:/usr/local/dev/Yocto$ source poky-init-build-env
   
   
  ### Shell environment set up for Poky builds. ###
trz@elmorro:/usr/local/dev$ '''cd Yocto/'''
trz@elmorro:/usr/local/dev/Yocto$ '''source oe-init-build-env'''
  ### Shell environment set up for builds. ###
   
   
  You can now run 'bitbake <target>'
  You can now run 'bitbake <target>'
   
   
  Common targets are:
  Common targets are:
     poky-image-minimal
     core-image-minimal
     poky-image-sato
     core-image-sato
     meta-toolchain
     meta-toolchain
     meta-toolchain-sdk
     meta-toolchain-sdk
    adt-installer
    meta-ide-support
   
   
  You can also run generated qemu images with a command like 'poky-qemu qemux86'
  You can also run generated qemu images with a command like 'runqemu qemux86'
   
   
  trz@elmorro:/usr/local/src/Yocto/build$ bitbake poky-image-sato
  trz@elmorro:/usr/local/dev/Yocto/build$ '''bitbake core-image-sato'''
  Pseudo is not present but is required, building this first before the main build
  Loading cache: 100% |######################################################################| ETA: 00:00:00
NOTE: Out of date cache found, rebuilding...
  Loaded 1041 entries from dependency cache.  
Parsing recipes: 100% |#################################################################################################| Time: 00:00:52
  Parsing of 783 .bb files complete (0 cached, 783 parsed). 991 targets, 11 skipped, 0 masked, 0 errors.
   
   
  OE Build Configuration:
  OE Build Configuration:
  BB_VERSION        = "1.11.0"
  BB_VERSION        = "1.13.3"
METADATA_BRANCH  = "bernard-cur"
METADATA_REVISION = "8b6416db1e04af83ecdf57522240ac859d5d8031"
  TARGET_ARCH      = "i586"
  TARGET_ARCH      = "i586"
  TARGET_OS        = "linux"
  TARGET_OS        = "linux"
  MACHINE          = "qemux86"
  MACHINE          = "qemux86"
  DISTRO            = "poky"
  DISTRO            = "poky"
  DISTRO_VERSION    = "1.0"
  DISTRO_VERSION    = "1.1.1"
TUNE_FEATURES    = "m32 i586"
  TARGET_FPU        = ""
  TARGET_FPU        = ""
meta             
meta-yocto        = "edison-cur:939ec1ca1eb428f536e324cc61f1d8afe6e60775"
   
   
  NOTE: Resolving any missing task queue dependencies
  NOTE: Resolving any missing task queue dependencies
Line 167: Line 168:
  NOTE: Executing SetScene Tasks
  NOTE: Executing SetScene Tasks
  NOTE: Executing RunQueue Tasks
  NOTE: Executing RunQueue Tasks
  NOTE: Running task 1 of 88 (ID: 21, /usr/local/src/Yocto/meta/recipes-devtools/quilt/quilt-native_0.48.bb, do_setscene)
  NOTE: Running task 4488 of 4490 (ID: 8, /usr/local/dev/Yocto/meta/recipes-sato/images/core-image-sato.bb, do_rootfs)
NOTE: Running task 2 of 88 (ID: 61, virtual:native:/usr/local/src/Yocto/meta/recipes-devtools/gnu-config/gnu-config_20080123.bb, do_setscene)
  NOTE: package core-image-sato-1.0-r0: task do_rootfs: Started
NOTE: Running task 3 of 88 (ID: 77, /usr/local/src/Yocto/meta/recipes-devtools/m4/m4-native_1.4.15.bb, do_setscene)
  NOTE: package core-image-sato-1.0-r0: task do_rootfs: Succeeded
NOTE: Running task 4 of 88 (ID: 37, virtual:native:/usr/local/src/Yocto/meta/recipes-devtools/autoconf/autoconf_2.65.bb, do_setscene)
  NOTE: Running noexec task 4490 of 4490 (ID: 5, /usr/local/dev/Yocto/meta/recipes-sato/images/core-image-sato.bb, do_build)
NOTE: Running task 5 of 88 (ID: 45, virtual:native:/usr/local/src/Yocto/meta/recipes-devtools/automake/automake_1.11.1.bb, do_setscene)
  NOTE: Tasks Summary: Attempted 4490 tasks of which 4488 didn't need to be rerun and 0 failed.
NOTE: Running task 6 of 88 (ID: 53, /usr/local/src/Yocto/meta/recipes-devtools/libtool/libtool-native_2.4.bb, do_setscene)
 
NOTE: Running task 7 of 88 (ID: 85, virtual:native:/usr/local/src/Yocto/meta/recipes-devtools/tcltk/tcl_8.5.9.bb, do_setscene)
The build succeeded so you can now boot the kernel and rootfs into a graphical desktop:
NOTE: Running task 8 of 88 (ID: 69, virtual:native:/usr/local/src/Yocto/meta/recipes-core/gettext/gettext_0.17.bb, do_setscene)
 
NOTE: package quilt-native-0.48-r0: task do_setscene: Started
  trz@elmorro:/usr/local/dev/Yocto/build$ '''runqemu qemux86'''
NOTE: package quilt-native-0.48-r0: task do_setscene: Succeeded
NOTE: package m4-native-1.4.15-r0: task do_setscene: Started
NOTE: package m4-native-1.4.15-r0: task do_setscene: Succeeded
NOTE: Running task 9 of 88 (ID: 20, /usr/local/src/Yocto/meta/recipes-devtools/quilt/quilt-native_0.48.bb, do_fetch)
NOTE: Running task 10 of 88 (ID: 76, /usr/local/src/Yocto/meta/recipes-devtools/m4/m4-native_1.4.15.bb, do_fetch)
.
.
.
NOTE: Running task 4960 of 4961 (ID: 9, /usr/local/src/Yocto/meta/recipes-sato/images/poky-image-sato.bb, do_rootfs)
  NOTE: package poky-image-sato-1.0-r0: task do_rootfs: Started
  NOTE: package poky-image-sato-1.0-r0: task do_rootfs: Succeeded
  NOTE: Running noexec task 4961 of 4961 (ID: 4, /usr/local/src/Yocto/meta/recipes-sato/images/poky-image-sato.bb, do_build)
  NOTE: Tasks Summary: Attempted 4961 tasks of which 4959 didn't need to be rerun and 0 failed.
trz@elmorro:/usr/local/src/Yocto/build$
  trz@elmorro:/usr/local/src/Yocto/build$ poky-qemu qemux86
   
   
  Continuing with the following parameters:
  Continuing with the following parameters:
  KERNEL: [/usr/local/src/Yocto/build/tmp/deploy/images/bzImage-qemux86.bin]
  KERNEL: [/usr/local/dev/Yocto/build/tmp/deploy/images/bzImage-qemux86.bin]
  ROOTFS: [/usr/local/src/Yocto/build/tmp/deploy/images/poky-image-sato-qemux86.ext3]
  ROOTFS: [/usr/local/dev/Yocto/build/tmp/deploy/images/core-image-sato-qemux86.ext3]
  FSTYPE: [ext3]
  FSTYPE: [ext3]
  Setting up tap interface under sudo
  Setting up tap interface under sudo
Line 202: Line 187:
  Starting distccd...
  Starting distccd...
  Running qemu...
  Running qemu...
  /usr/local/src/Yocto/build/tmp/sysroots/x86_64-linux/usr/bin/qemu -kernel /usr/local/src/Yocto/build/tmp/deploy/images/bzImage-qemux86.bin -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=no,downscript=no -hda /usr/local/src/Yocto/build/tmp/deploy/images/poky-image-sato-qemux86.ext3 -show-cursor -usb -usbdevice wacom-tablet -vga vmware -enable-gl -no-reboot --append "vga=0 root=/dev/hda mem=128M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 "
  /usr/local/dev/Yocto/build/tmp/sysroots/x86_64-linux/usr/bin/qemu -kernel /usr/local/dev/Yocto/build/tmp/deploy/images/bzImage-qemux86.bin -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=no,downscript=no -hda /usr/local/dev/Yocto/build/tmp/deploy/images/core-image-sato-qemux86.ext3 -show-cursor -usb -usbdevice wacom-tablet -vga vmware -enable-gl -no-reboot -m 128 --append "vga=0 root=/dev/hda rw mem=128M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 "
Enabling opengl
  vmsvga_value_write: guest runs Linux.
  vmsvga_value_write: guest runs Linux.
  Set 'tap0' nonpersistent
  Set 'tap0' nonpersistent
  Releasing lockfile of preconfigured tap device 'tap0'
  Releasing lockfile of preconfigured tap device 'tap0'
trz@elmorro:/usr/local/src/Yocto/build$

Latest revision as of 16:21, 12 March 2012

Here's a cut-and-paste shell session showing one way to do a start-from-scratch git checkout and build, the end result being a sato desktop in a qemu session (commands also shown for that).

NOTE: this transcript was from a build done on a Ubuntu 10.04 system. Please see the 'Yocto Project Quickstart' for the packages required to be installed on the host system for building [1]

One thing to note with this example is that I'm checking out from poky/edison.

trz@elmorro:/usr/local/dev$ mkdir Yocto
trz@elmorro:/usr/local/dev$ cd Yocto/
trz@elmorro:/usr/local/dev/Yocto$ git init
Initialized empty Git repository in /usr/local/dev/Yocto/.git/
trz@elmorro:/usr/local/dev/Yocto$ git remote add yocto git://git.yoctoproject.org/poky.git
trz@elmorro:/usr/local/dev/Yocto$ git remote update
Fetching yocto
remote: Counting objects: 134438, done.
remote: Compressing objects: 100% (39702/39702), done.
remote: Total 134438 (delta 93915), reused 131102 (delta 91225)
Receiving objects: 100% (134438/134438), 75.48 MiB | 1.70 MiB/s, done.
Resolving deltas: 100% (93915/93915), done.
From git://git.yoctoproject.org/poky
 * [new branch]      1.1_M1     -> yocto/1.1_M1
 * [new branch]      1.1_M2     -> yocto/1.1_M2
 * [new branch]      1.1_M3     -> yocto/1.1_M3
 * [new branch]      1.1_M4     -> yocto/1.1_M4
 * [new branch]      1.2_M1     -> yocto/1.2_M1
 * [new branch]      1.2_M2     -> yocto/1.2_M2
 * [new branch]      1.2_M3     -> yocto/1.2_M3
 * [new branch]      bernard    -> yocto/bernard
 * [new branch]      blinky     -> yocto/blinky
 * [new branch]      clyde      -> yocto/clyde
 * [new branch]      edison     -> yocto/edison
 * [new branch]      elroy      -> yocto/elroy
 * [new branch]      green      -> yocto/green
 * [new branch]      laverne    -> yocto/laverne
 * [new branch]      master     -> yocto/master
 * [new branch]      pinky      -> yocto/pinky
 * [new branch]      purple     -> yocto/purple
 * [new tag]         1.1_M1.final -> 1.1_M1.final
 * [new tag]         1.1_M2.final -> 1.1_M2.final
 * [new tag]         1.1_M2.rc3 -> 1.1_M2.rc3
 * [new tag]         1.1_M3.final -> 1.1_M3.final
 * [new tag]         1.1_M3.rc3 -> 1.1_M3.rc3
 * [new tag]         1.2_M1.final -> 1.2_M1.final
 * [new tag]         1.2_M1.rc2 -> 1.2_M1.rc2
 * [new tag]         1.2_M2.final -> 1.2_M2.final
 * [new tag]         1.2_M2.rc1 -> 1.2_M2.rc1
 * [new tag]         1.2_M3.rc1 -> 1.2_M3.rc1
 * [new tag]         bernard-5.0.2+docs -> bernard-5.0.2+docs
 * [new tag]         pinky-3.1.2 -> pinky-3.1.2
From git://git.yoctoproject.org/poky
 * [new tag]         1.1_M1.rc1 -> 1.1_M1.rc1
 * [new tag]         1.1_M1.rc2 -> 1.1_M1.rc2
 * [new tag]         1.1_M2.rc1 -> 1.1_M2.rc1
 * [new tag]         1.1_M2.rc2 -> 1.1_M2.rc2
 * [new tag]         1.1_M3.rc2 -> 1.1_M3.rc2
 * [new tag]         1.1_M4.rc2+ -> 1.1_M4.rc2+
 * [new tag]         1.1_M4.rc3 -> 1.1_M4.rc3
 * [new tag]         1.1_M4.rc4 -> 1.1_M4.rc4
 * [new tag]         1.2_M1.rc1 -> 1.2_M1.rc1
 * [new tag]         bernard-1.0rc1 -> bernard-1.0rc1
 * [new tag]         bernard-5.0 -> bernard-5.0
 * [new tag]         bernard-5.0-alpha -> bernard-5.0-alpha
 * [new tag]         bernard-5.0.1 -> bernard-5.0.1
 * [new tag]         bernard-5.0.2 -> bernard-5.0.2
 * [new tag]         bernard-5.0rc1 -> bernard-5.0rc1
 * [new tag]         bernard-5.0rc2 -> bernard-5.0rc2
 * [new tag]         edison-6.0 -> edison-6.0
 * [new tag]         laverne-4.0 -> laverne-4.0
 * [new tag]         laverne-4.0.1 -> laverne-4.0.1
 * [new tag]         m4         -> m4
 * [new tag]         purple-3.2 -> purple-3.2
 * [new tag]         purple-3.2.1 -> purple-3.2.1

trz@elmorro:/usr/local/dev/Yocto$ git checkout -b edison-cur yocto/edison
Branch edison-cur set up to track remote branch edison from yocto.
Switched to a new branch 'edison-cur'
trz@elmorro:/usr/local/dev/Yocto$ ls
bitbake        LICENSE  meta-demoapps  meta-yocto         README           scripts
documentation  meta     meta-skeleton  oe-init-build-env  README.hardware
trz@elmorro:/usr/local/dev/Yocto$ source oe-init-build-env 
You had no conf/local.conf file. This configuration file has therefore been
created for you with some default values. You may wish to edit it to use a 
different MACHINE (target hardware) or enable parallel build options to take 
advantage of multiple cores for example. See the file for more information as 
common configuration options are commented.

The Yocto Project has extensive documentation about OE including a reference manual
which can be found at:
    http://yoctoproject.org/documentation

For more information about OpenEmbedded see their website:
    http://www.openembedded.org/ 

You had no conf/bblayers.conf file. The configuration file has been created for
you with some default values. To add additional metadata layers into your
configuration please add entries to this file.

The Yocto Project has extensive documentation about OE including a reference manual
which can be found at:
    http://yoctoproject.org/documentation

For more information about OpenEmbedded see their website:
    http://www.openembedded.org/
 
 

### Shell environment set up for builds. ###

You can now run 'bitbake <target>' 

Common targets are:
    core-image-minimal
    core-image-sato
    meta-toolchain
    meta-toolchain-sdk
    adt-installer
    meta-ide-support 

You can also run generated qemu images with a command like 'runqemu qemux86'


trz@elmorro:/usr/local/dev/Yocto/build$ cd conf
trz@elmorro:/usr/local/dev/Yocto/build/conf$ ls
bblayers.conf  local.conf

Change only the following variables in local.conf, it makes the build go faster depending on how many CPUs you have. I have 4, with HT, so I'm changing my values to 8:

trz@elmorro:/usr/local/dev/Yocto/build/conf$ emacs -nw local.conf
BB_NUMBER_THREADS = "8"
PARALLEL_MAKE = "-j 8"

Since this is your first build, it won't matter - it will take awhile regardless, but for later builds, to avoid re-downloading all the packages again, you can point the DL_DIR variable in local conf to the downloads dir of a previous build. Continuing the session...

trz@elmorro:/usr/local/dev$ cd Yocto/
trz@elmorro:/usr/local/dev/Yocto$ source oe-init-build-env 

### Shell environment set up for builds. ###

You can now run 'bitbake <target>'

Common targets are:
    core-image-minimal
    core-image-sato
    meta-toolchain
    meta-toolchain-sdk
    adt-installer
    meta-ide-support

You can also run generated qemu images with a command like 'runqemu qemux86'

trz@elmorro:/usr/local/dev/Yocto/build$ bitbake core-image-sato
Loading cache: 100% |######################################################################| ETA:  00:00:00
Loaded 1041 entries from dependency cache. 

OE Build Configuration:
BB_VERSION        = "1.13.3"
TARGET_ARCH       = "i586"
TARGET_OS         = "linux"
MACHINE           = "qemux86"
DISTRO            = "poky"
DISTRO_VERSION    = "1.1.1"
TUNE_FEATURES     = "m32 i586"
TARGET_FPU        = ""
meta              
meta-yocto        = "edison-cur:939ec1ca1eb428f536e324cc61f1d8afe6e60775"

NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Running task 4488 of 4490 (ID: 8, /usr/local/dev/Yocto/meta/recipes-sato/images/core-image-sato.bb, do_rootfs)
NOTE: package core-image-sato-1.0-r0: task do_rootfs: Started
NOTE: package core-image-sato-1.0-r0: task do_rootfs: Succeeded
NOTE: Running noexec task 4490 of 4490 (ID: 5, /usr/local/dev/Yocto/meta/recipes-sato/images/core-image-sato.bb, do_build)
NOTE: Tasks Summary: Attempted 4490 tasks of which 4488 didn't need to be rerun and 0 failed.

The build succeeded so you can now boot the kernel and rootfs into a graphical desktop:

trz@elmorro:/usr/local/dev/Yocto/build$ runqemu qemux86

Continuing with the following parameters:
KERNEL: [/usr/local/dev/Yocto/build/tmp/deploy/images/bzImage-qemux86.bin]
ROOTFS: [/usr/local/dev/Yocto/build/tmp/deploy/images/core-image-sato-qemux86.ext3]
FSTYPE: [ext3]
Setting up tap interface under sudo
[sudo] password for trz: 
Acquiring lockfile for tap0...
Starting distccd...
Running qemu...
/usr/local/dev/Yocto/build/tmp/sysroots/x86_64-linux/usr/bin/qemu -kernel  /usr/local/dev/Yocto/build/tmp/deploy/images/bzImage-qemux86.bin -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=no,downscript=no -hda /usr/local/dev/Yocto/build/tmp/deploy/images/core-image-sato-qemux86.ext3 -show-cursor -usb -usbdevice wacom-tablet -vga vmware -enable-gl -no-reboot -m 128 --append "vga=0 root=/dev/hda rw mem=128M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 "
Enabling opengl
vmsvga_value_write: guest runs Linux.
Set 'tap0' nonpersistent
Releasing lockfile of preconfigured tap device 'tap0'