TipsAndTricks/BuildingAndRunningClearContainersonTarget

From Yocto Project
Jump to navigationJump to search

What & Why

Clear containers (CC) offer a hybrid solution that encompasses the advantages of hypervisor security and container deployment. So, we wanted to see if they could be used in a YP environment. This was done for Clear Containers 2.2 based on YP master around the time of 2.4 RC1/2.
Note: this is a Proof of Concept, done by building on target. The eventual goal would be to create a standard recipe to allow the clear containers to be built in the standard way. Hopefully, this guide will help with that by outlining the parts, dependencies, and configuration steps. This guide assumes you already have docker running on your target by having followed Running Docker on your image . The target example is being done with an Intel Nuc. I have successfully run the same code on a Minnowboard Turbot.

Dependencies you need

Layers

The layers I am using:

meta-openembedded/meta-oe                                                                               
meta-openembedded/meta-python                                                                                 
meta-openembedded/meta-networking                                                                      
meta-openembedded/meta-filesystems                                                                            
meta-virtualization                                                                                          
meta-clear

All of these layers can be found on layer.openembedded.org except the meta-clear. The meta-clear layer was created with the script yocto-layer. It's only purpose is to turn on CONFIG_VHOST_NET=m for the kernel. Here's a tree of the layer:

├── conf
│  └── layer.conf
├── COPYING.MIT
├── README
└── recipes-kernel
   └── linux
       ├── linux-yocto
       │   ├── clear.cfg
       │   └── clear.scc
       ├── linux-yocto_4.10.bbappend
       └── linux-yocto_4.9.bbappend

I am using the 4.9 kernel. Here's the linux-yocto_4.9.bbappend:

FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
SRC_URI += "file://clear.scc \
          "
KERNEL_MODULE_AUTOLOAD += "vhost-net"

The scc file:

define KFEATURE_DESCRIPTION "Enable clearcon support"
define KFEATURE_COMPATIBILITY board
kconf non-hardware clear.cfg

And finally the cfg file:

CONFIG_VHOST_NET=m

Conf Changes

This guide presumes you have the setup in your conf file described in Running Docker on your image . In addition, to make on target building easier, I add the following to my conf/local.conf:

EXTRA_IMAGE_FEATURES += " dev-pkgs tools-sdk tools-debug tools-profile   "

Additional Dependencies to Bitbake

These are the additional recipes I built in addition to the base I outlined above. They could be added all at once in the local.conf, if you want.

bitbake libcheck mdadm psmisc json-glib libmnl ossp-uuid autoconf-archive python-setuptools libcap-ng tunctl go

These are additional packages I built for convenience, but they are not required:

bitbake less zile ntp rsync minicom

Once built these can be installed on the board. Note that we need the dev pkgs as we are mostly completing build requirements for pieces of CC.

dnf install tunctl python-dev python-setuptools-dev libcap-ng-dev libcheck-dev libmnl-dev libjson-glib-1.0-dev  autoconf-archive-dev libcap-ng-dev python-setuptools-dev go

and the convenient ones:

dnf install zile less ntp rsync minicom

The Image to Build

bitbake core-image--base


The Pieces of CC

Clear Containers are comprised of a set of software and binaries. The main code is a slightly forked (2.9 currently) qemu hypervisor configured to be minimal, a command proxy, a shim, and the oci runtime. The command proxy is written in go. The rest is c/c++. We build the hypervisor itself, but the binaries for the hypervisor are downloaded from the CC site.

The Runtime,Shim & Proxy

This comes from [clear oci runtime]. While getting it to work, I followed the development model outlined in Leveraging Rpm Package Feeds. Here I will list the dependencies to make it shorter.
Which Clear was this?

cc-oci-runtime version: 2.2.0
spec version: 1.0.0-rc1
commit: f92d50ad54003298c139de59777f07588683cdc2

Getting the Source Code

We will pretty much follow the (very good) instructions in the README. Because it is a go project we will follow the go flow...

go get -d github.com/01org/cc-oci-runtime/...

The ... is necessary. If you are behind a proxy, make sure you export http_proxy and https_proxy into your shell.
This will put the src in ~/go/src/github.com/01org/cc-oci-runtime/ by default.

Building It

Again, following their README do

./autogen.sh --disable-functional-tests

We disable functional tests because I was not able to easily find a recipe for BATS (Bash automated testing).

make

The make install is quite clean and show where everything is going:

# make install
make[1]: Entering directory '/home/root/go/src/github.com/01org/cc-oci-runtime'
 /bin/mkdir -p '/usr/bin'
  /bin/sh ./libtool   --mode=install /usr/bin/install -c cc-oci-runtime '/usr/bin'
libtool: install: /usr/bin/install -c cc-oci-runtime /usr/bin/cc-oci-runtime
 /bin/mkdir -p '/usr/bin'
 /usr/bin/install -c data/cc-oci-runtime.sh '/usr/bin'
 /bin/mkdir -p '/usr/libexec'
  /bin/sh ./libtool   --mode=install /usr/bin/install -c cc-shim '/usr/libexec'
libtool: install: /usr/bin/install -c cc-shim /usr/libexec/cc-shim
 /bin/mkdir -p '/usr/libexec'
 /usr/bin/install -c cc-proxy '/usr/libexec'
 /bin/mkdir -p '/usr/share/defaults/cc-oci-runtime'
 /usr/bin/install -c -m 644 data/vm.json data/hypervisor.args data/kernel-cmdline '/usr/share/defaults/cc-oci-runtime'
 /bin/mkdir -p '/lib/systemd/system'
 /usr/bin/install -c -m 644 proxy/cc-proxy.service proxy/cc-proxy.socket '/lib/systemd/system'

Configuring It

The Hypervisor

The Hypervisor's Binaries

Running It

Configuration

Programs

Example

Debugging