Blacksand-ltp
1.3 M5 RC4 20121010 build
total: 21 (100%)
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| getrusage04 | NAB | getrusage04 0 TINFO : utime: 0us; stime: 0us getrusage04 0 TINFO : utime: 0us; stime: 4000us getrusage04 1 TFAIL : stime increased > 2000us: | n/a | Cause of memory | n/a | |
| madvise04 | LTP | madvise04 1 TFAIL : madvise test for MADV_DONTDUMP failed with return = -1, errno = 22 : Invalid argument | n/a | It's a LTP bug | n/a | |
| ksm05 | NAB | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory
ksm05 2 TBROK : Remaining cases broken ksm05 3 TBROK : open: errno=ENOENT(2): No such file or directory |
n/a | It is a LTP bug | n/a | |
| mallocstress01 | NAB | n/a | Not enough memory | n/a | ||
| mtest06_2 | NAB | main(): mmap(): Cannot allocate memory | n/a | Not enough memory | n/a | |
| thp02 | NAB | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo thp02 2 TBROK : Remaining cases broken | n/a | Kernel doesn't support this. | n/a | |
| max_map_count | NAB | max_map_count 0 TINFO : set max_map_count to 65536 max_map_count 6 TFAIL : 65537 map entries in total, ut expected 65536 entries max_map_count 0 TINFO : set overcommit_memory to 0 max_map_count 0 TINFO : set max_map_count to 6553 | n/a | Test case fails because the difference of system implement | n/a | |
| aio02 | LTP | io_fsync write: Invalid argument
aio02/aio_tio 0 TINFO : Running test 1 aio02/aio_tio 0 TINFO : Running test 2 aio02/aio_tio 0 TINFO : Running test 3 aio02/aio_tio 0 TINFO : Running test 4 aio02/aio_tio 0 TINFO : Running test 5 aio02/aio_tio 0 TINFO : Running test 6 aio02/aio_tio 0 TINFO : Running test 7 |
n/a | io_fsync write: Invalid argument | n/a | |
| su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| file | qemux86 | n/a | /opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.3 M5 RC3 20121003 build
total: 26 (100%)
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| get_robust_list01 | LTP | get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly | n/a | It is a LTP bug. Wait for upstream | n/a | |
| getrusage04 | NAB | getrusage04 0 TINFO : utime: 0us; stime: 0us getrusage04 0 TINFO : utime: 0us; stime: 4000us getrusage04 1 TFAIL : stime increased > 2000us: | n/a | Cause of memory | n/a | |
| ksm05 | NAB | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory
ksm05 2 TBROK : Remaining cases broken ksm05 3 TBROK : open: errno=ENOENT(2): No such file or directory |
n/a | It is a LTP bug | n/a | |
| setxattr03 | NAB | setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=EINVAL(22): Invalid argument
setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=EINVAL(22): Invalid argument |
n/a | Warning message | n/a | |
| dio10 | NAB | diotest4 1 TBROK : write failed for testdata-4.12416: No space left on device | n/a | No space left | n/a | |
| dio13 | NAB | diotest01 1 TFAIL : write(outfd) failed: No space left on device | n/a | No space left | n/a | |
| mtest01 | NAB | mtest01 1 TFAIL : More memory than the maximum amount you specified is already being used | n/a | Not enough memory | n/a | |
| mtest01w | NAB | mtest01 1 TFAIL : More memory than the maximum amount you specified is already being used | n/a | Not enough memory | n/a | |
| mallocstress01 | NAB | n/a | Not enough memory | n/a | ||
| mtest06_2 | NAB | main(): mmap(): Cannot allocate memory | n/a | Not enough memory | n/a | |
| thp02 | NAB | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo thp02 2 TBROK : Remaining cases broken | n/a | Kernel doesn't support this. | n/a | |
| max_map_count | NAB | max_map_count 0 TINFO : set max_map_count to 65536 max_map_count 6 TFAIL : 65537 map entries in total, ut expected 65536 entries max_map_count 0 TINFO : set overcommit_memory to 0 max_map_count 0 TINFO : set max_map_count to 6553 | n/a | Test case fails because the difference of system implement | n/a | |
| aio02 | LTP | io_fsync write: Invalid argument
aio02/aio_tio 0 TINFO : Running test 1 aio02/aio_tio 0 TINFO : Running test 2 aio02/aio_tio 0 TINFO : Running test 3 aio02/aio_tio 0 TINFO : Running test 4 aio02/aio_tio 0 TINFO : Running test 5 aio02/aio_tio 0 TINFO : Running test 6 aio02/aio_tio 0 TINFO : Running test 7 |
n/a | io_fsync write: Invalid argument | n/a | |
| su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| file | qemux86 | n/a | /opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.3 M4 RC3 20120916 build
total: 7 (100%)
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| getrusage04 | NAB | getrusage04 1 TFAIL : utime increased > 2000us: | n/a | Cause of memory | n/a | |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| get_robust_list01 | LTP | get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly | n/a | n/a | It is a LTP bug. Wait for upstream | n/a |
| setxattr03 | NAB | setxattr03 0 TWARN : Unset setxattr03immutable immutable failed: errno=ENOTTY(25): Inappropriate ioctl for device
setxattr03 0 TWARN : Unset setxattr03appendonly append-only failed: errno=ENOTTY(25): Inappropriate ioctl for device |
n/a | n/a | Warning message | n/a |
| gf16 | growfiles(gf16): 719 growfiles.c/1598: received unexpected signal: 1
gf16 1 TFAIL : Test failed |
n/a | n/a | n/a |
1.3 M1 RC1 20120613 build
total: 16 (100%)
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| getrusage04 | NEW | getrusage04 0 TINFO : Using 1 as multiply factor for max [us]time increment (1000+1000us)! getrusage04 0 TINFO : utime: 0us; stime: 0us getrusage04 0 TINFO : utime: 4000us; stime: 0us getrusage04 1 TFAIL : utime increased > 2000us: | n/a | Cause of memory | n/a | |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| aio02 | NEW | io_fsync write: Invalid argument
aio02/aio_tio 0 TINFO : Running test 1 aio02/aio_tio 0 TINFO : Running test 2 aio02/aio_tio 0 TINFO : Running test 3 aio02/aio_tio 0 TINFO : Running test 4 aio02/aio_tio 0 TINFO : Running test 5 aio02/aio_tio 0 TINFO : Running test 6 aio02/aio_tio 0 TINFO : Running test 7 |
n/a | n/a | n/a | |
| mtest06 | NEW | n/a | n/a | n/a | n/a | n/a |
| mallocstress01 | NEW | n/a | n/a | n/a | n/a | n/a |
| get_robust_list01 | NEW | get_robust_list01 1 TPASS : get_robust_list failed as expected with EFAULT get_robust_list01 2 TPASS : get_robust_list failed as expected with EFAULT get_robust_list01 3 TPASS : get_robust_list failed as expected with ESRCH get_robust_list01 4 TFAIL : get_robust_list succeeded unexpectedly get_robust_list01 5 TPASS : get_robust_list succeeded | n/a | n/a | n/a | n/a |
1.3 20120606 build
total: 15 (100%)
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| getrusage04 | NEW | getrusage04 0 TINFO : Using 1 as multiply factor for max [us]time increment (1000+1000us)! getrusage04 0 TINFO : utime: 0us; stime: 0us getrusage04 0 TINFO : utime: 4000us; stime: 0us getrusage04 1 TFAIL : utime increased > 2000us: | n/a | Cause of memory | n/a | |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| aio02 | NEW | io_fsync write: Invalid argument
aio02/aio_tio 0 TINFO : Running test 1 aio02/aio_tio 0 TINFO : Running test 2 aio02/aio_tio 0 TINFO : Running test 3 aio02/aio_tio 0 TINFO : Running test 4 aio02/aio_tio 0 TINFO : Running test 5 aio02/aio_tio 0 TINFO : Running test 6 aio02/aio_tio 0 TINFO : Running test 7 |
n/a | n/a | n/a | |
| mtest06 | NEW | n/a | n/a | n/a | n/a | n/a |
| mallocstress01 | NEW | n/a | n/a | n/a | n/a | n/a |
1.2/M4(RC5) Denzil
total: 21 (100%)
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| getrusage04 | NEW | getrusage04 0 TINFO : utime: 0us; stime: 0us getrusage04 0 TINFO : utime: 0us; stime: 4000us getrusage04 1 TFAIL : stime increased > 2000us: | n/a | Cause of memory | n/a | |
| ksm05 | NEW | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory
ksm05 2 TBROK : Remaining cases broken ksm05 3 TBROK : open: errno=ENOENT(2): No such file or directory |
n/a | Cause of memory | n/a | |
| ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
| su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| file | qemux86 | n/a | /opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 readlink03 0 TWARN : It may be a Kernel Bug, see the patch:http://git.kernel.org/linus/1fa1e7f6 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
| thp02 | NEW | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo thp02 2 TBROK : Remaining cases broken | n/a | n/a | n/a | |
| max_map_count | NEW | max_map_count 0 TINFO : set max_map_count to 65536 max_map_count 6 TFAIL : 65537 map entries in total, ut expected 65536 entries max_map_count 0 TINFO : set overcommit_memory to 0 max_map_count 0 TINFO : set max_map_count to 6553 | n/a | n/a | n/a | |
| min_free_kbytes | NEW | min_free_kbytes 2 TFAIL : child unexpectedly failed: 0 min_free_kbytes 0 TINFO : set min_free_kbytes to 3798 min_free_kbytes 0 TINFO : set overcommit_memory to 0 | n/a | n/a | n/a | |
| aio02 | NEW | io_fsync write: Invalid argument
aio02/aio_tio 0 TINFO : Running test 1 aio02/aio_tio 0 TINFO : Running test 2 aio02/aio_tio 0 TINFO : Running test 3 aio02/aio_tio 0 TINFO : Running test 4 aio02/aio_tio 0 TINFO : Running test 5 aio02/aio_tio 0 TINFO : Running test 6 aio02/aio_tio 0 TINFO : Running test 7 |
n/a | n/a | n/a |
1.2/M4(RC4)
total: 21 (100%)
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| getrusage04 | NEW | getrusage04 0 TINFO : utime: 0us; stime: 0us getrusage04 0 TINFO : utime: 0us; stime: 4000us getrusage04 1 TFAIL : stime increased > 2000us: | n/a | Cause of memory | n/a | |
| ksm05 | NEW | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory
ksm05 2 TBROK : Remaining cases broken ksm05 3 TBROK : open: errno=ENOENT(2): No such file or directory |
n/a | Cause of memory | n/a | |
| ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
| su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| file | qemux86 | n/a | /opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 readlink03 0 TWARN : It may be a Kernel Bug, see the patch:http://git.kernel.org/linus/1fa1e7f6 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
| thp02 | NEW | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo thp02 2 TBROK : Remaining cases broken | n/a | n/a | n/a | |
| max_map_count | NEW | max_map_count 0 TINFO : set max_map_count to 65536 max_map_count 6 TFAIL : 65537 map entries in total, ut expected 65536 entries max_map_count 0 TINFO : set overcommit_memory to 0 max_map_count 0 TINFO : set max_map_count to 6553 | n/a | n/a | n/a | |
| min_free_kbytes | NEW | min_free_kbytes 2 TFAIL : child unexpectedly failed: 0 min_free_kbytes 0 TINFO : set min_free_kbytes to 3798 min_free_kbytes 0 TINFO : set overcommit_memory to 0 | n/a | n/a | n/a | |
| aio02 | NEW | io_fsync write: Invalid argument
aio02/aio_tio 0 TINFO : Running test 1 aio02/aio_tio 0 TINFO : Running test 2 aio02/aio_tio 0 TINFO : Running test 3 aio02/aio_tio 0 TINFO : Running test 4 aio02/aio_tio 0 TINFO : Running test 5 aio02/aio_tio 0 TINFO : Running test 6 aio02/aio_tio 0 TINFO : Running test 7 |
n/a | n/a | n/a |
1.2/M4(RC3)
total: 21 (100%)
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| getrusage04 | NEW | getrusage04 0 TINFO : utime: 0us; stime: 4000us getrusage04 1 TFAIL : stime increased > 2000us: | n/a | Cause of memory | n/a | |
| ksm05 | NEW | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory
ksm05 2 TBROK : Remaining cases broken ksm05 3 TBROK : open: errno=ENOENT(2): No such file or directory |
n/a | Cause of memory | n/a | |
| ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
| su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| file | qemux86 | n/a | /opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 readlink03 0 TWARN : It may be a Kernel Bug, see the patch:http://git.kernel.org/linus/1fa1e7f6 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
| thp02 | NEW | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo thp02 2 TBROK : Remaining cases broken | n/a | n/a | n/a | |
| max_map_count | NEW | max_map_count 0 TINFO : set max_map_count to 65536 max_map_count 6 TFAIL : 65537 map entries in total, ut expected 65536 entries max_map_count 0 TINFO : set overcommit_memory to 0 max_map_count 0 TINFO : set max_map_count to 6553 | n/a | n/a | n/a | |
| min_free_kbytes | NEW | min_free_kbytes 1 TFAIL : child unexpectedly failed: 0 min_free_kbytes 0 TINFO : set min_free_kbytes to 449128 memfree is 898132 kB before eatup mem memfree is 550244 kB after eatup mem | n/a | n/a | n/a | |
| aio02 | NEW | io_fsync write: Invalid argument
aio02/aio_tio 0 TINFO : Running test 1 aio02/aio_tio 0 TINFO : Running test 2 aio02/aio_tio 0 TINFO : Running test 3 aio02/aio_tio 0 TINFO : Running test 4 aio02/aio_tio 0 TINFO : Running test 5 aio02/aio_tio 0 TINFO : Running test 6 aio02/aio_tio 0 TINFO : Running test 7 |
n/a | n/a | n/a |
1.2/M4(RC2)
total: 21 (100%)
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| getrusage04 | NEW | getrusage04 0 TINFO : utime: 0us; stime: 0us
getrusage04 0 TINFO : utime: 0us; stime: 4000us getrusage04 1 TFAIL : stime increased > 1000us: delta = 4000us |
n/a | Cause of memory | n/a | |
| ksm05 | NEW | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory
ksm05 2 TBROK : Remaining cases broken ksm05 3 TBROK : open: errno=ENOENT(2): No such file or directory ksm05 4 TBROK : open: errno=ENOENT(2): No such file or directory ksm05 5 TBROK : open: errno=ENOENT(2): No such file or directory |
n/a | Cause of memory | n/a | |
| ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
| su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| file | qemux86 | n/a | /opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 readlink03 0 TWARN : It may be a Kernel Bug, see the patch:http://git.kernel.org/linus/1fa1e7f6 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
| thp02 | NEW | thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo thp02 2 TBROK : Remaining cases broken | n/a | n/a | n/a | |
| max_map_count | NEW | max_map_count 0 TINFO : set max_map_count to 65536 max_map_count 6 TFAIL : 65537 map entries in total, ut expected 65536 entries max_map_count 0 TINFO : set overcommit_memory to 0 max_map_count 0 TINFO : set max_map_count to 6553 | n/a | n/a | n/a | |
| min_free_kbytes | NEW | min_free_kbytes 1 TFAIL : child unexpectedly failed: 0 min_free_kbytes 0 TINFO : set min_free_kbytes to 449128 memfree is 898132 kB before eatup mem memfree is 550244 kB after eatup mem | n/a | n/a | n/a | |
| aio02 | NEW | io_fsync write: Invalid argument
aio02/aio_tio 0 TINFO : Running test 1 aio02/aio_tio 0 TINFO : Running test 2 aio02/aio_tio 0 TINFO : Running test 3 aio02/aio_tio 0 TINFO : Running test 4 aio02/aio_tio 0 TINFO : Running test 5 aio02/aio_tio 0 TINFO : Running test 6 aio02/aio_tio 0 TINFO : Running test 7 |
n/a | n/a | n/a |
1.2/M4(RC1)
total: 16 (100%)
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| getrusage04 | NEW | getrusage04 0 TINFO : utime: 0us; stime: 0us
getrusage04 0 TINFO : utime: 0us; stime: 4000us getrusage04 1 TFAIL : stime increased > 1000us: delta = 4000us |
n/a | Cause of memory | n/a | |
| ksm05 | NEW | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory
ksm05 2 TBROK : Remaining cases broken ksm05 3 TBROK : open: errno=ENOENT(2): No such file or directory ksm05 4 TBROK : open: errno=ENOENT(2): No such file or directory ksm05 5 TBROK : open: errno=ENOENT(2): No such file or directory |
n/a | Cause of memory | n/a | |
| ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
| su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| file | qemux86 | n/a | /opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2/M3(RC1)
total: 16 (100%)
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| getrusage04 | NEW | getrusage03 0 TINFO : post_wait.children = 283836
getrusage03 5 TFAIL : child.children !~= 300MB |
n/a | Cause of memory | n/a | |
| ksm05 | NEW | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory
ksm05 2 TBROK : Remaining cases broken ksm05 3 TBROK : open: errno=ENOENT(2): No such file or directory ksm05 4 TBROK : open: errno=ENOENT(2): No such file or directory ksm05 5 TBROK : open: errno=ENOENT(2): No such file or directory |
n/a | Cause of memory | n/a | |
| ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
| su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| file | qemux86 | n/a | /opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1.1
total: 36 (100%)
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| proc01 | NEW | jiajun | proc01 1 TFAIL : read failed: /proc/self/task/18865/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL : read failed: /proc/self/task/18865/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/18865/ns/ipc: errno=EINVAL(22): Invalid argument proc01 4 TFAIL : read failed: /proc/self/ns/net: errno=EINVAL(22): Invalid argument proc01 5 TFAIL : read failed: /proc/self/ns/uts: errno=EINVAL(22): Invalid argument proc01 6 TFAIL : read failed: /proc/self/ns/ipc: errno=EINVAL(22): Invalid argument proc01 7 TFAIL : readproc() failed with 6 errors | introduced with 3.0 kernel | ||
| mmap11 | LTP | mmap11 0 TINFO : [751]
mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| clock_settime03 | NEW | jiajun | clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument | introduced with 3.0 kernel | ||
| readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
| sockioctl01 | LTP | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
| mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ksm01 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ksm01_1 | LTP | ksm01 1 TCONF : KSM configuration is not enabled
ksm01 2 TCONF : Remaining cases not appropriate for configuration |
n/a | This is a LTP bug | n/a | |
| ksm03 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broke |
n/a | This is a LTP bug | n/a | |
| ksm03_1 | LTP | ksm03 0 TINFO : child 2 stops.
ksm03 1 TBROK : unexpected signal 15 received (pid = 20429). ksm03 2 TBROK : Remaining cases broken ksm03 0 TINFO : child 1 stops. ksm03 1 TBROK : unexpected signal 15 received (pid = 20428). ksm03 2 TBROK : Remaining cases broken ksm03 0 TINFO : KSM merging... ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
| su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| file | qemux86 | n/a | /opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog06 | n/a | n/a | n/a | n/a | n/a | |
| syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2/M2(RC1)
total: 27 (100%)
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| getrusage03 | NEW | getrusage03 0 TINFO : post_wait.children = 153868
getrusage03 5 TFAIL : child.children !~= 300MB |
n/a | Cause of memory | n/a | |
| ldd | NEW | /usr/lib/gcc/i586-poky-linux/4.6.3/../../../../i586-poky-linux/bin/ld: error in /opt/ltp/testcases/bin/lddfile5.obj(.eh_frame); no .eh_frame_hdr table will be created. | n/a | n/a | [bug1922] | |
| ksm05 | NEW | ksm05 1 TBROK : open: errno=ENOENT(2): No such file or directory
ksm05 2 TBROK : Remaining cases broken ksm05 3 TBROK : open: errno=ENOENT(2): No such file or directory ksm05 4 TBROK : open: errno=ENOENT(2): No such file or directory ksm05 5 TBROK : open: errno=ENOENT(2): No such file or directory |
n/a | Cause of memory | n/a | |
| clock_settime03 | NEW | jiajun | clock_settime03 1 TPASS : clock_settime(2) got expected failure.: TEST_ERRNO=EFAULT(14): Bad address | n/a | introduced with 3.0 kernel | n/a |
| nm | NEW | nm: nmfile1.obj: no symbols
nm: nmfile2.obj: no symbols nm: nmfile3.obj: no symbols nm -A: FAIL |
n/a | n/a | [bug1923] | |
| proc01 | NEW | jiajun | proc01 1 TFAIL : read failed: /proc/self/task/28424/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL : read failed: /proc/self/task/28424/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/28424/ns/ipc: errno=EINVAL(22): Invalid argument proc01 4 TFAIL : read failed: /proc/self/ns/net: errno=EINVAL(22): Invalid argument proc01 5 TFAIL : read failed: /proc/self/ns/uts: errno=EINVAL(22): Invalid argument proc01 6 TFAIL : read failed: /proc/self/ns/ipc: errno=EINVAL(22): Invalid argument proc01 7 TFAIL : readproc() failed with 6 errors | n/a | introduced with 3.0 kernel | n/a |
| readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
| sockioctl01 | LTP | ATMARK on UDP; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
| mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
| su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| file | qemux86 | n/a | /opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.2/M1(RC2)
total: 36 (100%)
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| proc01 | NEW | jiajun | proc01 1 TFAIL : read failed: /proc/self/task/28424/ns/net: errno=EINVAL(22): Invalid argument proc01 2 TFAIL : read failed: /proc/self/task/28424/ns/uts: errno=EINVAL(22): Invalid argument proc01 3 TFAIL : read failed: /proc/self/task/28424/ns/ipc: errno=EINVAL(22): Invalid argument proc01 4 TFAIL : read failed: /proc/self/ns/net: errno=EINVAL(22): Invalid argument proc01 5 TFAIL : read failed: /proc/self/ns/uts: errno=EINVAL(22): Invalid argument proc01 6 TFAIL : read failed: /proc/self/ns/ipc: errno=EINVAL(22): Invalid argument proc01 7 TFAIL : readproc() failed with 6 errors | introduced with 3.0 kernel | ||
| mmap11 | LTP | mmap11 0 TINFO : [751]
mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| clock_settime03 | NEW | jiajun | clock_settime03 8 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument clock_settime03 9 TFAIL : clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument | introduced with 3.0 kernel | ||
| readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
| sockioctl01 | LTP | ATMARK on UDP; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
| mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ksm01 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ksm01_1 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ksm03 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ksm03_1 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
| su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| file | qemux86 | n/a | /opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog06 | n/a | n/a | n/a | n/a | n/a | |
| syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1/M4(RC4)
total: 37 (100%)
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| creat08 | NEW | |||||
| proc01 | NEW | jiajun | clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument | introduced with 3.0 kernel | ||
| mmap11 | LTP | mmap11 0 TINFO : [751]
mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| clock_settime03 | NEW | jiajun | sockioctl01 8/9 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | introduced with 3.0 kernel | ||
| readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
| sockioctl01 | LTP | ATMARK on UDP; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
| mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ksm01 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ksm01_1 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ksm03 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ksm03_1 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
| su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| file | qemux86 | n/a | /opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog06 | n/a | n/a | n/a | n/a | n/a | |
| syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1/M4(RC3)
total: 37 (100%)
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| creat08 | NEW | |||||
| proc01 | NEW | jiajun | clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument | introduced with 3.0 kernel | ||
| clock_settime03 | NEW | jiajun | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | introduced with 3.0 kernel | ||
| readlink03 | LTP | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno=2 | n/a | When 'Symlink Pathname is empty' the return value was 'ENOENT' but with newer kernels the return value is 'EINVAL'. It is a LTP bug. | n/a | |
| sockioctl01 | LTP | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | n/a | Inappropriate ioctl operation returning EINVAL with newer kernels. It is a LTP bug. | n/a | |
| mmap11 | LTP | mmap11 0 TINFO : [471]
mmap11 1 TBROK : pthread_create: errno=EAGAIN(11): Resource temporarily unavailable mmap11 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| mmap10_2 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use /dev/zero. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| mmap10_3 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| mmap10_4 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| mmap10_5 | LTP | mmap10 0 TINFO : add to KSM regions.
mmap10 0 TINFO : use anonymous pages. mmap10 0 TINFO : start tests. mmap10 1 TBROK : madvise: errno=EINVAL(22): Invalid argument mmap10 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ksm01 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ksm01_1 | LTP | ksm01 0 TINFO : KSM merging...
ksm01 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm01 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ksm03 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ksm03_1 | LTP | ksm03 0 TINFO : KSM merging...
ksm03 1 TBROK : open: errno=ENOENT(2): No such file or directory ksm03 2 TBROK : Remaining cases broken |
n/a | This is a LTP bug | n/a | |
| ld | LTP | Assertion 1 ..................
-) Assertion 2 .................. 1,4c1,3 < gcc: error: x.obj: No such file or directory < gcc: error: y.obj: No such file or directory < gcc: fatal error: no input files < compilation terminated. --- > gcc: x.obj: No such file or directory > gcc: y.obj: No such file or directory > gcc: No input files FAIL - ld failed to give expected error msg |
n/a | This is a LTP bug | [bug1162] | |
| su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| file | qemux86 | n/a | /opt/ltp/testcases/bin/file_test.sh: line 549: rpmbuild: command not found | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog06 | n/a | n/a | n/a | n/a | n/a | |
| syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
1.1/M4
total: 26 (100%)
| LTP cases | status | owner | error msg | comment | bugzilla |
| readlink03 | NEW | jiajun | readlink03 9 TFAIL : readlink() failed, Symlink Pathname is empty, errno=22, expected errno= | introduced with 3.0 kernel | |
| sockioctl01 | NEW | jiajun | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | introduced with 3.0 kernel | |
| proc01 | NEW | jiajun | clock_settime(2) failed to produce expected error (return code = -1): TEST_ERRNO=EINVAL(22): Invalid argument | introduced with 3.0 kernel | |
| clock_settime03 | NEW | jiajun | sockioctl01 4 TFAIL : ATMARK on UDP ; returned -1 (expected -1), errno 25 (expected 22) | introduced with 3.0 kernel | |
| file | qemux86 | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a |
| syslog03 | qemux86 | n/a | n/a | n/a | n/a |
| syslog04 | qemux86 | n/a | n/a | n/a | n/a |
| syslog05 | qemux86 | n/a | n/a | n/a | n/a |
| syslog07 | qemux86 | n/a | n/a | n/a | n/a |
| syslog08 | qemux86 | n/a | n/a | n/a | n/a |
| syslog09 | qemux86 | n/a | n/a | n/a | n/a |
| syslog10 | qemux86 | n/a | n/a | n/a | n/a |
| su01 | qemux86 | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a |
| ld | qemux86 | n/a | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a |
| gzip01 | qemux86 | n/a | n/a | n/a | n/a |
1.1/M3
total: 28 (100%)
| LTP cases | status | owner | error msg | comment | bugzilla |
| gf02 | NEW | growfiles(gf02): 13903 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 13903 growfiles.c/1679: 1 Hit max errors value of 1 | http://bugzilla.pokylinux.org/show_bug.cgi?id=1138 | ||
| gf05 | NEW | growfiles(gf02): 13903 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 13903 growfiles.c/1679: 1 Hit max errors value of 1 | http://bugzilla.pokylinux.org/show_bug.cgi?id=1138 | ||
| gf07 | NEW | growfiles(gf02): 13903 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 13903 growfiles.c/1679: 1 Hit max errors value of 1 | http://bugzilla.pokylinux.org/show_bug.cgi?id=1138 | ||
| gf09 | NEW | growfiles(gf02): 13903 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 13903 growfiles.c/1679: 1 Hit max errors value of 1 | http://bugzilla.pokylinux.org/show_bug.cgi?id=1138 | ||
| gf19 | NEW | growfiles(gf02): 13903 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 13903 growfiles.c/1679: 1 Hit max errors value of 1 | http://bugzilla.pokylinux.org/show_bug.cgi?id=1138 | ||
| quota_remount_test01 | NAB | Kevin Tian | quota_remount_test01.sh: line 86: quotacheck: not found | n/a | live image doesn't contain quota utility |
| ioctl03 | qemux86 | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a |
| syslog03 | qemux86 | n/a | n/a | n/a | n/a |
| syslog04 | qemux86 | n/a | n/a | n/a | n/a |
| syslog05 | qemux86 | n/a | n/a | n/a | n/a |
| syslog07 | qemux86 | n/a | n/a | n/a | n/a |
| syslog08 | qemux86 | n/a | n/a | n/a | n/a |
| syslog09 | qemux86 | n/a | n/a | n/a | n/a |
| syslog10 | qemux86 | n/a | n/a | n/a | n/a |
| su01 | qemux86 | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a |
| ld | NEW | n/a | n/a | n/a | http://bugzilla.pokylinux.org/show_bug.cgi?id=1162 |
| file | qemux86 | n/a | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a |
| gzip01 | qemux86 | n/a | n/a | n/a | n/a |
1.1/M2
total: 28 (100%)
| LTP cases | status | owner | error msg | comment | bugzilla |
| gf02 | NEW | growfiles(gf02): 13903 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 13903 growfiles.c/1679: 1 Hit max errors value of 1 | http://bugzilla.pokylinux.org/show_bug.cgi?id=1138 | ||
| gf05 | NEW | growfiles(gf02): 13903 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 13903 growfiles.c/1679: 1 Hit max errors value of 1 | http://bugzilla.pokylinux.org/show_bug.cgi?id=1138 | ||
| gf07 | NEW | growfiles(gf02): 13903 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 13903 growfiles.c/1679: 1 Hit max errors value of 1 | http://bugzilla.pokylinux.org/show_bug.cgi?id=1138 | ||
| gf09 | NEW | growfiles(gf02): 13903 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 13903 growfiles.c/1679: 1 Hit max errors value of 1 | http://bugzilla.pokylinux.org/show_bug.cgi?id=1138 | ||
| gf19 | NEW | growfiles(gf02): 13903 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 13903 growfiles.c/1679: 1 Hit max errors value of 1 | http://bugzilla.pokylinux.org/show_bug.cgi?id=1138 | ||
| quota_remount_test01 | NAB | Kevin Tian | quota_remount_test01.sh: line 86: quotacheck: not found | n/a | live image doesn't contain quota utility |
| ioctl03 | qemux86 | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a |
| syslog03 | qemux86 | n/a | n/a | n/a | n/a |
| syslog04 | qemux86 | n/a | n/a | n/a | n/a |
| syslog05 | qemux86 | n/a | n/a | n/a | n/a |
| syslog07 | qemux86 | n/a | n/a | n/a | n/a |
| syslog08 | qemux86 | n/a | n/a | n/a | n/a |
| syslog09 | qemux86 | n/a | n/a | n/a | n/a |
| syslog10 | qemux86 | n/a | n/a | n/a | n/a |
| su01 | qemux86 | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a |
| ld | qemux86 | n/a | n/a | n/a | n/a |
| file | qemux86 | n/a | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a |
| gzip01 | qemux86 | n/a | n/a | n/a | n/a |
1.1/M1
total: 30 (100%)
| LTP cases | status | owner | error msg | comment | bugzilla |
| gf02 | NEW | growfiles(gf02): 13903 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 13903 growfiles.c/1679: 1 Hit max errors value of 1 | http://bugzilla.pokylinux.org/show_bug.cgi?id=1138 | ||
| gf05 | NEW | growfiles(gf02): 13903 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 13903 growfiles.c/1679: 1 Hit max errors value of 1 | http://bugzilla.pokylinux.org/show_bug.cgi?id=1138 | ||
| gf07 | NEW | growfiles(gf02): 13903 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 13903 growfiles.c/1679: 1 Hit max errors value of 1 | http://bugzilla.pokylinux.org/show_bug.cgi?id=1138 | ||
| gf09 | NEW | growfiles(gf02): 13903 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 13903 growfiles.c/1679: 1 Hit max errors value of 1 | http://bugzilla.pokylinux.org/show_bug.cgi?id=1138 | ||
| gf19 | NEW | growfiles(gf02): 13903 growfiles.c/2144: 1 tlibio.c/1675 aio_write, aio_error = 1 Operation not permitted; random method 0200002 growfiles(gf02): 13903 growfiles.c/1679: 1 Hit max errors value of 1 | http://bugzilla.pokylinux.org/show_bug.cgi?id=1138 | ||
| mtest06_2 | NAB | Kevin Tian | main(): mmap(): Cannot allocate memory | The case needs more than 1GB memory | |
| quota_remount_test01 | NAB | Kevin Tian | quota_remount_test01.sh: line 86: quotacheck: not found | n/a | live image doesn't contain quota utility |
| ioctl03 | qemux86 | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a |
| syslog03 | qemux86 | n/a | n/a | n/a | n/a |
| syslog04 | qemux86 | n/a | n/a | n/a | n/a |
| syslog05 | qemux86 | n/a | n/a | n/a | n/a |
| syslog07 | qemux86 | n/a | n/a | n/a | n/a |
| syslog08 | qemux86 | n/a | n/a | n/a | n/a |
| syslog09 | qemux86 | n/a | n/a | n/a | n/a |
| syslog10 | qemux86 | n/a | n/a | n/a | n/a |
| mtest06 | qemux86 | n/a | n/a | n/a | n/a |
| su01 | qemux86 | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a |
| ld | qemux86 | n/a | n/a | n/a | n/a |
| file | qemux86 | n/a | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a |
| gzip01 | qemux86 | n/a | n/a | n/a | n/a |
1.0/M2
total: 29 (100%)
- LTP: 0
- NAB: 1
- Fixed: 0
- Duplicated: 28
- pending: 0
- not started: 0
similarity: 28 (96.00%):
quota_remount_test01
| LTP cases | status | owner | error msg | lsb | comment | bugzilla |
| quota_remount_test01 | NAB | Kevin Tian | quota_remount_test01.sh: line 86: quotacheck: not found | n/a | atom-pc live image doesn't contain quota utility | n/a |
| ioctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| lchown02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| lchown02_16 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| sysctl03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog03 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog04 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog05 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog07 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog08 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog09 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| syslog10 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| mtest06 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| su01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron02 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_deny01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_allow01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron_dirs_checks01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| ld | qemux86 | n/a | n/a | n/a | n/a | n/a |
| ldd | qemux86 | n/a | n/a | n/a | n/a | n/a |
| file | qemux86 | n/a | n/a | n/a | n/a | n/a |
| tar | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cron | qemux86 | n/a | n/a | n/a | n/a | n/a |
| logrotate | qemux86 | n/a | n/a | n/a | n/a | n/a |
| cpio | qemux86 | n/a | n/a | n/a | n/a | n/a |
| unzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
| gzip01 | qemux86 | n/a | n/a | n/a | n/a | n/a |
