BKM: starting a new BSP
Note: Though much of this page is still valid and can be useful in many cases, it should be noted that there are now tools that can help with the task of creating new BSPs and managing kernel patches and configuration settings for those BSPs, which you may want to consider first. Detailed documentation and walk-throughs using those tools are available at the following pages:
Yocto BSP Tools Documentation, Transcript: Using the Yocto BSP tools to manage kernel patches and config items, Transcript: Using the Yocto BSP tools to create a qemu BSP and Transcript: Using the Yocto BSP tools to create a meta-intel BSP.
This is a practical 'quick start' on creating a new BSP. For detailed background and instructions on how to to formally do this, please see the BSP Developer's Guide and the Kernel Manual. This document is essentially a pragmatic distillation of those documents but oriented toward the mechanics of quickly getting the initial BSP infrastructure in place for a minimally functional new BSP.
Mostly it's a straightforward exercise:
- copy a meta-* subdirectory representing the metadata of the BSP
- add it as a layer and configure the build system to use it
- add or tweak the machine configuration and recipes in the layer to get things working
- create a specialized branch for the BSP in the kernel and add kernel metadata to customize it for the BSP
The final step above (dealing with the kernel) is actually the most time-consuming and least straightforward aspect of not only creating the initial BSP, but of maintaining it going forward, so much of this document will be dedicated to addressing that aspect of BSP creation/maintenance.
Starting Out
As mentioned in the BSP Developer's Guide, the easiest way to start a new BSP is to base it on a similar already-existing working BSP. For this guide, we'll essentially go through the steps used to create the BSP for the Fish River Island, which exists in its current form as meta-fishriver in the meta-intel repository.
For this particular BSP, a bit of background on the base hardware and its relationship with some similar Intel hardware, the Crown Bay platform, will be useful when describing how the fishriver BSP was created. For the purposes of this guide, the relevant components of the Crown Bay platform that we care about are the 'EG20T platform controller hub' (Topcliff) which provides 'platform' components such as USB hardware and a gigabit ethernet adapter, etc, and the processor, which in the case of the Crown Bay platform, is the E660 Atom 'Tunnel Creek' processor with on-board graphics. The Fish River Island I is also based on the Topcliff, but instead of a Tunnel Creek processor, it uses a Z530 Atom 'eMenlow' processor. The Fish River Island II will make use of the Tunnel Creek processor instead of the eMenlow; the relevant aspect of this last fact relative to BSP development relates to the on-board graphics of these chips, in that both the Crown Bay and Fish River Island II BSPs can use the same configuration of the Intel EMGD graphics driver support to drive the video subsystems, whereas the Fish River Island I uses a simpler graphics setup based on VESA graphics.
So, from the perspective of the BSP developer, the important facts are:
- both the Crown Bay and Fish River Island I/II use the EG20T and can share support for this
- both the Crown Bay and Fish River Island II use the same graphics configuration and can share support for EMGD
- the Fish River Island I uses different graphics from the Crown Bay, so can't share anything with respect to graphics
Since this guide only really covers the Fish River Island I, we won't go into any more detail on anything related to the Fish River Island II - in addition to the above similarities, it adds a set of additional components to justify its existence as a separate BSP - adding that is left as an exercise for the reader ;-)
Before we start, we need to do a basic checkout of the Yocto sources. For this example, we'll assume you've done so by following the instructions in the following tutorial, Transcript: from git checkout to meta-intel BSP, but only up to and including the step starting with 'Now check out the meta-intel repo into the top-level Yocto repo dir'.
So the first step for the Fish River BSP would be to take a look at what's already available in meta-intel, and use one of the existing BSPs as a starting point.
Here's a list of the current set of BSPs available in the meta-intel repository:
trz@copacabana:~/yocto/dev/meta-intel$ ls -al total 52 drwxr-xr-x 11 trz trz 4096 2011-06-24 17:39 . drwxr-xr-x 13 trz trz 4096 2011-06-24 17:38 .. drwxr-xr-x 5 trz trz 4096 2011-06-24 17:39 common drwxr-xr-x 8 trz trz 4096 2011-06-24 17:39 .git -rw-r--r-- 1 trz trz 1854 2011-06-24 17:39 MAINTAINERS drwxr-xr-x 8 trz trz 4096 2011-06-24 17:39 meta-crownbay drwxr-xr-x 10 trz trz 4096 2011-06-24 17:39 meta-emenlow drwxr-xr-x 8 trz trz 4096 2011-06-24 17:39 meta-jasperforest drwxr-xr-x 8 trz trz 4096 2011-06-24 17:39 meta-n450 drwxr-xr-x 8 trz trz 4096 2011-06-24 17:39 meta-sugarbay -rw-r--r-- 1 trz trz 71 2011-06-24 17:39 README
For us, since we already know the answer, the obvious starting point would be the meta-crownbay BSP. Here's a listing of the files contained within the meta-crownbay 'layer':
trz@copacabana:~/yocto/dev/meta-intel/meta-crownbay$ find . . ./conf ./conf/machine ./conf/machine/crownbay.conf ./conf/machine/crownbay-noemgd.conf ./conf/layer.conf ./recipes-kernel ./recipes-kernel/linux ./recipes-kernel/linux/linux-yocto_2.6.37.bbappend ./recipes-kernel/linux/linux-yocto_2.6.34.bbappend ./recipes-core ./recipes-core/tasks ./recipes-core/tasks/task-core-tools.bbappend ./README ./recipes-bsp ./recipes-bsp/formfactor ./recipes-bsp/formfactor/formfactor ./recipes-bsp/formfactor/formfactor/crownbay ./recipes-bsp/formfactor/formfactor/crownbay/machconfig ./recipes-bsp/formfactor/formfactor/crownbay-noemgd ./recipes-bsp/formfactor/formfactor/crownbay-noemgd/machconfig ./recipes-bsp/formfactor/formfactor_0.0.bbappend ./recipes-graphics ./recipes-graphics/xorg-xserver ./recipes-graphics/xorg-xserver/xserver-xf86-config ./recipes-graphics/xorg-xserver/xserver-xf86-config/crownbay ./recipes-graphics/xorg-xserver/xserver-xf86-config/crownbay/xorg.conf ./recipes-graphics/xorg-xserver/xserver-xf86-config/crownbay-noemgd ./recipes-graphics/xorg-xserver/xserver-xf86-config/crownbay-noemgd/xorg.conf ./recipes-graphics/xorg-xserver/emgd-driver-bin-1.6 ./recipes-graphics/xorg-xserver/emgd-driver-bin-1.6/.gitignore ./recipes-graphics/xorg-xserver/xserver-xf86-emgd-bin ./recipes-graphics/xorg-xserver/xserver-xf86-emgd-bin/.gitignore ./recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend ./recipes-graphics/xorg-xserver/emgd-driver-bin_1.6.bb ./README.sources ./binary ./binary/.gitignore ./COPYING.MIT
Since meta-crownbay is the most similar BSP to the new BSP we want to create, we'll simply copy the contents of meta-crownbay into a new directory for our BSP, meta-fishriver, and rework the contents into something useful for our new BSP.
In particular, for the Fish River Island I, we don't need anything to do with EMGD, so we remove all the emgd-related recipes and other files. We do, however, keep the xorg.conf contained in the crownbay-noemgd subdir (but rename the subdir for our new bsp) and we also keep the crownbay-noemgd machconfig, again with an appropriate rename. The initial set of files for the fish river island BSP then becomes:
trz@copacabana:~/yocto/dev/meta-intel$ cp -a meta-crownbay meta-fishriver delete what we don't want, rename what we do, etc trz@copacabana:~/yocto/dev/meta-intel/meta-fishriver$ find . . ./conf ./conf/machine ./conf/machine/fishriver.conf ./conf/layer.conf ./recipes-kernel ./recipes-kernel/linux ./recipes-kernel/linux/linux-yocto_2.6.37.bbappend ./recipes-kernel/linux/linux-yocto_2.6.34.bbappend ./recipes-core ./recipes-core/tasks ./recipes-core/tasks/task-core-tools.bbappend ./README ./recipes-bsp ./recipes-bsp/formfactor ./recipes-bsp/formfactor/formfactor ./recipes-bsp/formfactor/formfactor/fishriver ./recipes-bsp/formfactor/formfactor/fishriver/machconfig ./recipes-bsp/formfactor/formfactor_0.0.bbappend ./recipes-graphics ./recipes-graphics/xorg-xserver ./recipes-graphics/xorg-xserver/xserver-xf86-config ./recipes-graphics/xorg-xserver/xserver-xf86-config/fishriver ./recipes-graphics/xorg-xserver/xserver-xf86-config/fishriver/xorg.conf ./recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend ./README.sources ./binary ./binary/.gitignore ./COPYING.MIT
One additional task needed before we attempt building the new BSP is to slightly change the kernel configuration by modifying the contents of recipes-kernel/linux/linux-yocto_2.6.37.bbappend. For this BSP, we'll remove the lines having to do with crownbay, but keep the ones having to do with crownbay-noemgd (replacing 'crownbay-noemgd' with 'fishriver'):
COMPATIBLE_MACHINE_fishriver = "fishriver" KMACHINE_fishriver = "yocto/standard/crownbay" KERNEL_FEATURES_append_fishriver += " cfg/smp.scc"
Note that the above changes leave the KMACHINE branch as "yocto/standard/crownbay". For the initial build and boot of the BSP, we'll simply use the crownbay machine branch in the kernel, which is sufficient for initial work (later we'll create a dedicated machine branch for fishriver).
Finally, you need to make a couple changes to actually use the new layer in a build. First, you need to add the new layer to build/conf/bblayers.conf:
BBLAYERS = " \ /usr/local/src/yocto/crownbay-emgd-1.6/meta \ /usr/local/src/yocto/crownbay-emgd-1.6/meta-yocto \ /usr/local/src/yocto/crownbay-emgd-1.6/meta-intel/meta-fishriver \ "
Then, you need to specify the new machine in build/conf/local.conf:
MACHINE ??= "fishriver"
At this point, you should be able to build and boot a fully-functional graphical fishriver BSP image.
If not, you'll need to go through the standard cycle of recipe debugging to get things to work. Similarly, if you need to add or modify capabilities to the image, it would be via the standard recipe development/debug cycle, which this document doesn't cover, there being copious amounts of documentation and wisdom in that area already existent elsewhere.
What this guide will discuss more is the kernel and modifications to the kernel recipe and kernel-related components of the BSP.
Creating a new kernel branch for the BSP
Up to this point, all we've done is create the build system infrastructure for the new fishriver BSP. It still uses the same kernel as the BSP it was based on. If we want to customize the kernel differently in any way from the BSP it was based on, we need to create a new machine branch for it, and add new BSP-specific information in the 'meta' branch to go along with it.
To do this, let's first create a 'bare' clone of the current linux-yocto kernel repository (the Yocto kernel tools require using a bare clone):
$ git clone --bare git://git.yoctoproject.org/linux-yocto-2.6.37 linux-yocto-2.6.37.git
Note the branches 'yocto/standard/crownbay' and 'yocto/emgd' in the linux-yocto-2.6.37 repo:
$ git branch -a * master meta yocto/base yocto/eg20t yocto/emgd yocto/gma500 yocto/standard/arm-versatile-926ejs yocto/standard/base yocto/standard/beagleboard yocto/standard/common-pc-64/base yocto/standard/common-pc-64/jasperforest yocto/standard/common-pc-64/romley yocto/standard/common-pc-64/sugarbay yocto/standard/common-pc/atom-pc yocto/standard/common-pc/base yocto/standard/crownbay yocto/standard/emenlow yocto/standard/fsl-mpc8315e-rdb yocto/standard/mti-malta32-be yocto/standard/mti-malta32-le yocto/standard/preempt-rt/base yocto/standard/preempt-rt/common-pc yocto/standard/preempt-rt/common-pc-64 yocto/standard/qemu-ppc32 yocto/standard/routerstationpro
What we want is a new branch, 'yocto/standard/fishriver', which we'll base on the current 'yocto/standard/crownbay'. To do this, we first create a local clone of the bare clone:
$ git clone linux-yocto-2.6.37.git linux-yocto-2.6.37
and in the new clone simply check out 'yocto/standard/crownbay' as 'yocto/standard/fishriver':
$ git checkout -b yocto/standard/fishriver remotes/origin/yocto/standard/crownbay
You should now be able to see the new branch:
$ git branch -a master * yocto/standard/fishriver remotes/origin/HEAD -> origin/master
Now that you have a new fishriver branch, you need to push it to the bare clone (which we'll set the kernel tools up to use in a later step):
$ git push origin yocto/standard/fishriver2:yocto/standard/fishriver2 Total 0 (delta 0), reused 0 (delta 0) To /home/trz/work/linux-yocto-2.6.37.git * [new branch] yocto/standard/fishriver -> yocto/standard/fishriver
You should now be able to see the new branch in the bare clone:
$ git branch -a * master meta yocto/base yocto/eg20t yocto/emgd yocto/gma500 yocto/standard/arm-versatile-926ejs yocto/standard/base yocto/standard/beagleboard yocto/standard/common-pc-64/base yocto/standard/common-pc-64/jasperforest yocto/standard/common-pc-64/romley yocto/standard/common-pc-64/sugarbay yocto/standard/common-pc/atom-pc yocto/standard/common-pc/base yocto/standard/crownbay yocto/standard/emenlow yocto/standard/fishriver yocto/standard/fsl-mpc8315e-rdb yocto/standard/mti-malta32-be yocto/standard/mti-malta32-le yocto/standard/preempt-rt/base yocto/standard/preempt-rt/common-pc yocto/standard/preempt-rt/common-pc-64 yocto/standard/qemu-ppc32 yocto/standard/routerstationpro
You now have a 'machine' branch dedicated to your BSP. The next step is to add BSP-specific data to the 'meta' branch of the kernel repository. First, check out the meta branch:
$ git checkout -b meta-fishriver remotes/origin/meta
That will give you a new 'meta' directory in the kernel filesystem. The subdirectory within that that we're interested in is cfg/kernel-cache:
meta/cfg/kernel-cache$ ls 00-README arch bsp cfg features ktypes kver patches scripts small
Within that, for the time being, we're interested in the 'bsp' directory, which is where we'll add our initial kernel infrastructure for our new BSP:
cfg/kernel-cache/bsp$ ls arm-versatile-926ejs beagleboard common-pc-64 emenlow fsl-mpc8315e-rdb mti-malta32 romley sugarbay atom-pc common-pc crownbay fishriver jasperforest qemu-ppc32 routerstationpro
Again, since we're basing the new BSP directly on crownbay, we'll simply re-use the crownbay infrastructure:
meta/cfg/kernel-cache/bsp$ cp -a crownbay fishriver
Here are the contents of the new fishriver directory before any changes:
meta/cfg/kernel-cache/bsp/fishriver$ ls -al total 24 drwxr-xr-x 2 trz trz 4096 2011-06-27 18:49 . drwxr-xr-x 18 trz trz 4096 2011-06-28 07:24 .. -rw-r--r-- 1 trz trz 1400 2011-06-27 18:49 crownbay.cfg -rw-r--r-- 1 trz trz 362 2011-06-27 18:49 crownbay.scc -rw-r--r-- 1 trz trz 122 2011-06-27 18:49 crownbay-standard.scc -rw-r--r-- 1 trz trz 656 2011-06-27 18:49 eg20t.cfg
We'll rename these as needed, but will focus on the changes needed to the file contents to make them work for fishriver.
Starting at the 'top', we'll make the changes we need first to crownbay-standard.scc after renaming it to fishriver-standard.scc. Here are the contents without any changes:
define KMACHINE crownbay define KTYPE standard define KARCH i386 scc_leaf ktypes/standard crownbay include crownbay.scc
Here we can see several fields that need to be changed, most importantly KMACHINE and scc_leaf. Scc_leaf is the most important – the definition provided here allows the kernel tools to find the ‘top-level’ of the kernel configuration for the machine, which allows it to start the process of creating a final .config for the kernel from the complete set of kernel config fragments up the inheritance chain for the BSP, given the machine name specified here along with the kernel type. So making these changes, what we end up with is this:
define KMACHINE fishriver define KTYPE standard define KARCH i386 scc_leaf ktypes/standard fishriver include fishriver.scc
Notice that we've also changed the last line to include fishriver.scc, which is just crownbay.scc renamed to fishriver.scc:
cfg/kernel-cache/bsp/fishriver$ mv crownbay.scc fishriver.scc cfg/kernel-cache/bsp/fishriver$ cat fishriver.scc kconf hardware crownbay.cfg kconf hardware eg20t.cfg git merge yocto/emgd include features/intel-e1xxxx/intel-e1xxxx.scc include features/drm-emgd/drm-emgd.scc include features/dmaengine/dmaengine.scc include features/serial/8250.scc include features/logbuf/size-normal.scc include features/latencytop/latencytop.scc include features/profiling/profiling.scc
fishriver.scc is actually where the fishriver-specific configuration gets pulled together. The first two lines include straight (though extensive) 'config fragments' directly - these are just copied directly into the final .config. For example, crownbay.cfg contains things like:
CONFIG_X86_32=y CONFIG_MATOM=y CONFIG_PRINTK=y . . .
And eg20t.cfg contains egt20t-specific config fragments:
# Basic hardware support for the box - network, USB, PCI, sound CONFIG_NETDEVICES=y CONFIG_ATA=y # Hardware support for the Platform Controller Hub EG20T CONFIG_PCH_DMA=y CONFIG_PCH_UART_DMA=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PCH=y CONFIG_SERIAL_8250_PCH_DMA=y . . .
NOTE: Currently the eg20t.cfg is copied a couple places in the tree, which is of course suboptimal; the intent is to add a 'feature' for this which along with the (currently unused) eg20t branch would encapsulate the eg20t patches and configuration for easy re-use.
The other items in this file do make use of encapsulated features that result in other config fragments corresponding to those features being added to the final .config.
The final important piece of the configuration for this BSP is the line:
git merge yocto/emgd
which, combined with the 'drm-emgd' feature:
include features/drm-emgd/drm-emgd.scc
adds emgd support to the BSP.
NOTE: the fishriver BSP actually removes this line, but the fishriver2 would add it back in; in any case, it illustrates an important concept so we'll cover it here anyway.
If you look at the branch listing of the kernel repo, you'll see a 'feature branch' named 'yocto/emgd':
$ git branch -a master * meta0 yocto/standard/fishriver2 remotes/origin/HEAD -> origin/master remotes/origin/master remotes/origin/meta remotes/origin/remotes/origin/yocto/standard/common-pc-64/base remotes/origin/yocto/base remotes/origin/yocto/eg20t remotes/origin/yocto/emgd remotes/origin/yocto/gma500 remotes/origin/yocto/standard/arm-versatile-926ejs
If you get a log listing, you'll see a series of patches at the top which have been added to yocto/base and which implement the kernel support for EMGD:
$ git log remotes/origin/yocto/emgd commit 2264cdc31a6e222fb65caad042505934e156b7ad Author: Tom Zanussi <tom.zanussi@intel.com> Date: Wed May 11 09:05:59 2011 -0500 emgd: backfix for 2.6.37 Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> commit fc264f1dfb3b17f0239e08ad7c3c0f98b09fd5c2 Author: Tom Zanussi <tom.zanussi@intel.com> Date: Fri May 6 22:50:20 2011 -0500 yocto/emgd: 2.6.39 fixes Fixes required for migration to 2.6.39. Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> commit 7946104c07ac52a7e5816d2156f9b6f8ed09dbfa Author: Tom Zanussi <tom.zanussi@intel.com> Date: Tue May 3 16:56:56 2011 -0500 yocto/emgd: build fixups Add emgd config option (DRM_EGD) and modify Makefiles for in-tree builds. Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> commit eab1e2634aece1f89cdc7b7b95364c54a532a2f3 Author: Tom Zanussi <tom.zanussi@intel.com> Date: Tue May 3 16:44:37 2011 -0500 yocto/emgd: emgd 1.61 driver
When the kernel tools actually process the .scc files to produce the final build kernel, the command 'git merge yocto/emgd' causes the code (patch commits) in the yocto/emgd feature branch to be merged with the yocto/standard/fishriver branch to produce the branch that actually gets built.
In order to enable the code from the merged emgd branch, we need a few matching config options. These are defined by a couple files in the features/drm-emgd directory, a one-line .scc file and .cfg file containing the EMGD kernel config fragment:
$ cat meta/cfg/kernel-cache/features/drm-emgd/drm-emgd.cfg CONFIG_DRM=y CONFIG_DRM_EGD=m CONFIG_DRM_KMS_HELPER=m
Once we fix up all these files by replacing 'crownbay' with 'fishriver' everywhere, we're ready to check it all in and push it to our bare clone's meta branch:
$ git add meta/cfg/kernel-cache/bsp/fishriver $ git commit -a -s $ git push origin meta-fishriver:meta
At this point, the kernel should have everything needed in order to build using the new fishriver branch. We do of course need to remember to actually change our kernel .bbappend to point to the new branch, so go back to recipes-kernel/linux/linux-yocto_2.6.37.bbappend and make sure it looks like this:
COMPATIBLE_MACHINE_fishriver = "fishriver" KMACHINE_fishriver = "yocto/standard/fishriver" KERNEL_FEATURES_append_fishriver += " cfg/smp.scc"
There is one bit of admistrativia we need to configure first, though, in order to have the build actually use our local changes.
Pointing the build at a local kernel (using the meta-kernel-dev layer)
One way of pointing the kernel recipes for your BSP to your local kernel repo, without changing any of your BSP code is to use the 'meta-kernel-dev' layer contained in the 'poky-extras' git repo.
To use it, first clone the poky-extras repo into your build tree, and check out the master branch:
$ cd poky $ mkdir poky-extras; cd poky-extras $ git init $ git remote add poky-extras git://git.yoctoproject.org/poky-extras.git $ git remote update $ git checkout -b master0 remotes/poky-extras/master
To point the kernel recipe to your local repo instead of the official remote version, change KSRC_linux_yocto and KMACHINE in poky-extras/meta-kernel-dev/recipes-kernel/linux/linux-yocto_2.6.37.bbappend to point to your local repo and branch, as such:
KSRC_linux_yocto ?= /home/trz/work/linux-yocto-2.6.37.git KMACHINE_fishriver ?= "yocto/standard/fishriver"
Also, to avoid some other build errors, you need to also comment out the COMPATIBLE_MACHINE lines in poky-extras/meta-kernel-dev/recipes-kernel/linux/linux-yocto_2.6.34.bbappend and poky-extras/meta-kernel-dev/recipes-kernel/linux/linux-yocto-dev.bbappend:
#COMPATIBLE_MACHINE = ${MACHINE}
Now you should be able to do a new build and your new machine branch and kernel meta changes will be used to build the kernel.
Getting your changes into the official linux-yocto repo
Once you've tested your new kernel machine branch and kernel 'meta' commit(s), you'll want to push those changes to the linux-yocto-contrib repo and ask the Yocto kernel maintainer to pull them in. You'll also need to push your meta-fishriver BSP's Yocto metadata to the appropriate contib repo (meta-intel-contrib in this case) and ask that repo's maintainer to pull it in to the appropriate repo.
You should push the kernel changes first, and wait until those have been accepted before asking for the Yocto changes to be pulled. The simple reason for this is that the Yocto changes should include the kernel SRCREVs from the kernel repo, and those won't be known until the kernel changes have been pulled in.
In other words, in order for the changes you've made to actually be built into the kernel, the SRCREVs in the meta-fishriver/recipes-kernel/linux/linux-yocto_2.6.37.bbappend must contain the commit ids of the final commits on the BSP's machine branch and the repo's meta branch:
SRCREV_machine_pn-linux-yocto_fishriver ?= "697d84759be192403a8a87ab269196c67a0c2c88" SRCREV_meta_pn-linux-yocto_fishriver ?= "f1dc3722d45cdcc92c84ebfecf4ce616d2efed26"
Adding new options and/or changing kernel code
Making kernel configuration changes and/or applying kernel patches
At this point, we've gotten ourselves set up with a dedicated kernel branch and configuration for our BSP, and can now make changes at will. In fact, the above setup (using the meta-kernel-dev layer) is exactly what we want when making changes to the kernel (you can also use the .cfg URL method described in the BSP Developer's Guide and Kernel Guide, but this method is more direct and simple once you get used to it).
There are essentially 3 different use cases for adding things to the kernel, in order of frequency:
- setting/changing kernel config options
- adding patches along with config options e.g. adding modules (you can also keep modules out-of-tree, but we won't cover that here)
- adding patches with no change to configuration
Setting/changing kernel config options
Most of the kernel-related changes needed by developers or customers both when creating a new BSP and when maintaining a BSP are just a config option or set of config options. Essentially, there are two different categories that kernel config options fall into vis a vis the Yocto build system:
- one-off - specific to a given BSP
- general-purpose - an option or grouping of options that would benefit multiple BSPs
One-off options
The one-off case is the simplest - in this case, you simply want to enable the option in the BSP and be done with it. For this type of option, you can just add the option to the BSP's top-level .cfg file e.g. in the case of fishriver, you'd add the option to the top-level meta/cfg/kernel-cache/bsp/fishriver/fishriver.cfg file:
CONFIG_X86_32=y CONFIG_MATOM=y CONFIG_PRINTK=y # Basic hardware support for the box - network, USB, PCI, sound CONFIG_NETDEVICES=y # Here's our new option, we just want to enable PRINTK_TIME, nothing more CONFIG_PRINTK_TIME
In this case, there's really nothing reusable about turning on timestamps for printk, so we commit this change to fishriver.cfg, rebuild (NOTE: unless you tell the build system to rebuild the kernel, it won't and you won't see the change if that doesn't happen - try bitbake yocto-linux -c cleanall) and when we reboot, we should see timestamps in our dmesg output.
General-purpose options
The general-purpose case is a little more involved but not much. Take for example, turning on high-precision event timers. Doing this actually involves several config options and is likely to be something that many BSPs would like to do, so it's a perfect candidate for a new 'kernel feature' encapsulating the options.
To do that, we'll first create a new directory called 'hpet' under meta/cfg/kernel-cache/features, to contain the feature:
$ mkdir meta/cfg/kernel-cache/features/hpet $ cd meta/cfg/kernel-cache/features/hpet
In that directory, create two files, hpet.scc and hpet.cfg. hpet.scc allows the kernel tools to identify the feature, and contains just one line:
kconf non-hardware hpet.cfg
which essentially does nothing more than point to the hpet.cfg file in the same directory, which contains the actual config options:
CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y # enable /dev/hpet and allow it to be mmapped CONFIG_HPET=y CONFIG_HPET_MMAP=y
The directory and two files taken together constitute the 'hpet' feature, which can be used by any BSP as such:
include features/hpet/hpet.scc
which results in the given config options appearing in the final kernel .config.
Again, we need to commit this change to fishriver.cfg and rebuild in order to have the config options take effect.
Options plus changes to the kernel code
This case is exactly the same as the the previous option-only cases, except that in addition (or instead of), you check out the BSP's machine branch and make changes or apply patches, then commit the changes.
Finally, in all cases, once you've made your changes and are happy with them, you'll want to follow the instructions in the 'Getting your changes into the official linux-yocto repo' section above in order to have your changes become part of the offical Yocto repositories.
