Transcript: from git checkout to qemu desktop - Revision history

Tzanussi at 16:21, 12 March 2012

2012-03-12T16:21:28Z

← Older revision		Revision as of 16:21, 12 March 2012
Line 125:		Line 125:
	Change only the following variables in local.conf, it makes the build go faster depending on how many CPUs you have. I have 4, with HT, so I'm changing my values to 8:		Change only the following variables in local.conf, it makes the build go faster depending on how many CPUs you have. I have 4, with HT, so I'm changing my values to 8:

	trz@elmorro:/usr/local/~~src~~/Yocto/build/conf$ '''emacs -nw local.conf'''		trz@elmorro:/usr/local/dev/Yocto/build/conf$ '''emacs -nw local.conf'''
	BB_NUMBER_THREADS = "8"		BB_NUMBER_THREADS = "8"
	PARALLEL_MAKE = "-j 8"		PARALLEL_MAKE = "-j 8"

	Since this is your first build, it won't matter - it will take awhile regardless, but for later builds, to avoid re-downloading all the packages again, you can point the DL_DIR variable in local conf to the downloads dir of a previous build. Continuing the session...		Since this is your first build, it won't matter - it will take awhile regardless, but for later builds, to avoid re-downloading all the packages again, you can point the DL_DIR variable in local conf to the downloads dir of a previous build. Continuing the session...

	trz@elmorro:/usr/local/dev~~/Yocto/build~~$ '''cd /~~usr/local/dev/Yocto~~'''		trz@elmorro:/usr/local/dev$ '''cd Yocto/'''
	trz@elmorro:/usr/local/dev/Yocto$ '''source oe-init-build-env'''		trz@elmorro:/usr/local/dev/Yocto$ '''source oe-init-build-env'''

	### Shell environment set up for builds. ###		### Shell environment set up for builds. ###

	You can now run 'bitbake <target>'		You can now run 'bitbake <target>'
Line 148:		Line 148:
	You can also run generated qemu images with a command like 'runqemu qemux86'		You can also run generated qemu images with a command like 'runqemu qemux86'

	trz@elmorro:/usr/local/~~src~~/Yocto/build$ bitbake ~~poky~~-image-sato		trz@elmorro:/usr/local/dev/Yocto/build$ '''bitbake core-image-sato'''
	~~Pseudo is not present but is required, building this first before the main build~~		Loading cache: 100% \|######################################################################\| ETA: 00:00:00
	~~NOTE: Out of date~~ cache ~~found, rebuilding...~~		Loaded 1041 entries from dependency cache.
	~~Parsing recipes~~: 100% \|~~###########################~~######################################################################\| ~~Time~~: 00:00:52
	~~Parsing of 783 .bb files complete (0 cached, 783 parsed). 991 targets, 11 skipped, 0 masked, 0 errors~~.

	OE Build Configuration:		OE Build Configuration:
	BB_VERSION = "1.11.0"		BB_VERSION = "1.13.3"
	~~METADATA_BRANCH = "bernard-cur"~~
	~~METADATA_REVISION = "8b6416db1e04af83ecdf57522240ac859d5d8031~~"
	TARGET_ARCH = "i586"		TARGET_ARCH = "i586"
	TARGET_OS = "linux"		TARGET_OS = "linux"
	MACHINE = "qemux86"		MACHINE = "qemux86"
	DISTRO = "poky"		DISTRO = "poky"
	DISTRO_VERSION = "1.0"		DISTRO_VERSION = "1.1.1"
			TUNE_FEATURES = "m32 i586"
	TARGET_FPU = ""		TARGET_FPU = ""
			meta
			meta-yocto = "edison-cur:939ec1ca1eb428f536e324cc61f1d8afe6e60775"

	NOTE: Resolving any missing task queue dependencies		NOTE: Resolving any missing task queue dependencies
Line 169:		Line 168:
	NOTE: Executing SetScene Tasks		NOTE: Executing SetScene Tasks
	NOTE: Executing RunQueue Tasks		NOTE: Executing RunQueue Tasks
	NOTE: Running task ~~1 of 88 (ID: 21, /usr/local/src/Yocto/meta/recipes-devtools/quilt/quilt-native_0.48.bb, do_setscene)~~		NOTE: Running task 4488 of 4490 (ID: 8, /usr/local/dev/Yocto/meta/recipes-sato/images/core-image-sato.bb, do_rootfs)
	~~NOTE: Running task 2~~ of 88 (ID: ~~61, virtual:native:/usr/local/src/Yocto/meta/recipes-devtools/gnu-config/gnu-config_20080123.bb, do_setscene)~~		NOTE: package core-image-sato-1.0-r0: task do_rootfs: Started
	~~NOTE: Running task 3 of 88 (ID: 77, /usr/local/src/Yocto/meta/recipes-devtools/m4/m4-native_1.4.15.bb, do_setscene)~~		NOTE: package core-image-sato-1.0-r0: task do_rootfs: Succeeded
	~~NOTE: Running task 4 of 88 (ID: 37, virtual:native:/usr/local/src/Yocto/meta/recipes-devtools/autoconf/autoconf_2.65.bb, do_setscene)~~		NOTE: Running noexec task 4490 of 4490 (ID: 5, /usr/local/dev/Yocto/meta/recipes-sato/images/core-image-sato.bb, do_build)
	~~NOTE: Running task 5 of 88 (ID: 45, virtual:native:/usr/local/src/Yocto/meta/recipes-devtools/automake/automake_1.11.1.bb, do_setscene)~~		NOTE: Tasks Summary: Attempted 4490 tasks of which 4488 didn't need to be rerun and 0 failed.
	~~NOTE: Running task 6 of 88 (ID: 53, /usr/local/src/Yocto/meta/recipes-devtools/libtool/libtool-native_2.4.bb, do_setscene)~~
	~~NOTE: Running task 7 of 88 (ID: 85, virtual:native:/usr/local/src/Yocto/meta/recipes-devtools/tcltk/tcl_8.5.9.bb, do_setscene)~~		The build succeeded so you can now boot the kernel and rootfs into a graphical desktop:
	~~NOTE: Running task~~ 8 ~~of 88 (ID: 69~~, ~~virtual:native:~~/usr/local/~~src/Yocto/meta/recipes-core/gettext/gettext_0.17.bb, do_setscene)~~
	~~NOTE: package quilt-native-0.48-r0: task do_setscene: Started~~		trz@elmorro:/usr/local/dev/Yocto/build$ '''runqemu qemux86'''
	~~NOTE: package quilt-native-0.48-r0: task do_setscene: Succeeded~~
	~~NOTE: package m4-native-1.4.15-r0: task do_setscene: Started~~
	~~NOTE: package m4-native-1.4.15-r0: task do_setscene: Succeeded~~
	~~NOTE: Running task 9 of 88 (ID: 20, /usr/local/src/Yocto/meta/recipes-devtools/quilt/quilt-native_0.48.bb, do_fetch)~~
	~~NOTE: Running task 10 of 88 (ID: 76, /usr/local/src/Yocto/meta/recipes-devtools/m4/m4-native_1.4.15.bb, do_fetch)~~
	.
	.
	.
	~~NOTE: Running task 4960 of 4961 (ID: 9, /usr/local/src~~/Yocto/meta/recipes-sato/images/~~poky~~-image-sato.bb, do_rootfs)
	NOTE: package ~~poky~~-image-sato-1.0-r0: task do_rootfs: Started
	NOTE: package ~~poky~~-image-sato-1.0-r0: task do_rootfs: Succeeded
	NOTE: Running noexec task ~~4961~~ of ~~4961~~ (ID: 4, /usr/local/~~src~~/Yocto/meta/recipes-sato/images/~~poky~~-image-sato.bb, do_build)
	NOTE: Tasks Summary: Attempted ~~4961~~ tasks of which ~~4959~~ didn't need to be rerun and 0 failed.
	~~trz@elmorro~~:~~/usr/local/src/Yocto/build$~~

	trz@elmorro:/usr/local/~~src~~/Yocto/build$ ~~poky-qemu~~ qemux86

	Continuing with the following parameters:		Continuing with the following parameters:
	KERNEL: [/usr/local/~~src~~/Yocto/build/tmp/deploy/images/bzImage-qemux86.bin]		KERNEL: [/usr/local/dev/Yocto/build/tmp/deploy/images/bzImage-qemux86.bin]
	ROOTFS: [/usr/local/~~src~~/Yocto/build/tmp/deploy/images/~~poky~~-image-sato-qemux86.ext3]		ROOTFS: [/usr/local/dev/Yocto/build/tmp/deploy/images/core-image-sato-qemux86.ext3]
	FSTYPE: [ext3]		FSTYPE: [ext3]
	Setting up tap interface under sudo		Setting up tap interface under sudo
Line 204:		Line 187:
	Starting distccd...		Starting distccd...
	Running qemu...		Running qemu...
	/usr/local/~~src~~/Yocto/build/tmp/sysroots/x86_64-linux/usr/bin/qemu -kernel /usr/local/~~src~~/Yocto/build/tmp/deploy/images/bzImage-qemux86.bin -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=no,downscript=no -hda /usr/local/~~src~~/Yocto/build/tmp/deploy/images/~~poky~~-image-sato-qemux86.ext3 -show-cursor -usb -usbdevice wacom-tablet -vga vmware -enable-gl -no-reboot --append "vga=0 root=/dev/hda mem=128M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 "		/usr/local/dev/Yocto/build/tmp/sysroots/x86_64-linux/usr/bin/qemu -kernel /usr/local/dev/Yocto/build/tmp/deploy/images/bzImage-qemux86.bin -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=no,downscript=no -hda /usr/local/dev/Yocto/build/tmp/deploy/images/core-image-sato-qemux86.ext3 -show-cursor -usb -usbdevice wacom-tablet -vga vmware -enable-gl -no-reboot -m 128 --append "vga=0 root=/dev/hda rw mem=128M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 "
			Enabling opengl
	vmsvga_value_write: guest runs Linux.		vmsvga_value_write: guest runs Linux.
	Set 'tap0' nonpersistent		Set 'tap0' nonpersistent
	Releasing lockfile of preconfigured tap device 'tap0'		Releasing lockfile of preconfigured tap device 'tap0'
	~~trz@elmorro:/usr/local/src/Yocto/build$~~

Tzanussi at 04:49, 11 March 2012

2012-03-11T04:49:03Z

← Older revision		Revision as of 04:49, 11 March 2012
Line 131:		Line 131:
	Since this is your first build, it won't matter - it will take awhile regardless, but for later builds, to avoid re-downloading all the packages again, you can point the DL_DIR variable in local conf to the downloads dir of a previous build. Continuing the session...		Since this is your first build, it won't matter - it will take awhile regardless, but for later builds, to avoid re-downloading all the packages again, you can point the DL_DIR variable in local conf to the downloads dir of a previous build. Continuing the session...

	trz@elmorro:/usr/local/dev/Yocto/build~~/conf~~$ cd /usr/local/dev/Yocto		trz@elmorro:/usr/local/dev/Yocto/build$ '''cd /usr/local/dev/Yocto'''
	trz@elmorro:/usr/local/dev/Yocto$ source ~~poky~~-init-build-env		trz@elmorro:/usr/local/dev/Yocto$ '''source oe-init-build-env'''

	### Shell environment set up for ~~Poky~~ builds. ###		### Shell environment set up for builds. ###

	You can now run 'bitbake <target>'		You can now run 'bitbake <target>'

	Common targets are:		Common targets are:
	~~poky~~-image-minimal		core-image-minimal
	~~poky~~-image-sato		core-image-sato
	meta-toolchain		meta-toolchain
	meta-toolchain-sdk		meta-toolchain-sdk
			adt-installer
			meta-ide-support

	You can also run generated qemu images with a command like '~~poky-qemu~~ qemux86'		You can also run generated qemu images with a command like 'runqemu qemux86'

	trz@elmorro:/usr/local/src/Yocto/build$ bitbake poky-image-sato		trz@elmorro:/usr/local/src/Yocto/build$ bitbake poky-image-sato

Tzanussi at 04:46, 11 March 2012

2012-03-11T04:46:47Z

Show changes

Tzanussi at 23:38, 4 April 2011

2011-04-04T23:38:48Z

← Older revision		Revision as of 23:38, 4 April 2011
Line 1:		Line 1:
	Here's a cut-and-paste shell session showing one way to do a start-from-scratch git checkout and build, the end result being a sato desktop in a qemu session (commands also shown for that).		Here's a cut-and-paste shell session showing one way to do a start-from-scratch git checkout and build, the end result being a sato desktop in a qemu session (commands also shown for that).

			NOTE: this transcript was from a build done on a Ubuntu 10.04 system. Please see the 'Yocto Project Quickstart' for the packages required to be installed on the host system for building [http://www.yoctoproject.org/docs/yocto-quick-start/yocto-project-qs.html]

	One thing to note with this example is that I'm checking out from poky/bernard, only because when I created this session, poky/master wasn't building for me. Normally, you'd want to use poky/master i.e. in the step below where it says 'git checkout -b bernard-cur poky/bernard' you'd want to do 'git checkout -b master-cur poky/master'. Sometimes it's easier to just use the last known stable version in cases where master is broken and you don't necessarily need master to get your work done.		One thing to note with this example is that I'm checking out from poky/bernard, only because when I created this session, poky/master wasn't building for me. Normally, you'd want to use poky/master i.e. in the step below where it says 'git checkout -b bernard-cur poky/bernard' you'd want to do 'git checkout -b master-cur poky/master'. Sometimes it's easier to just use the last known stable version in cases where master is broken and you don't necessarily need master to get your work done.
Line 78:		Line 80:

	Rahul: For this build, just change only the following variables in local.conf,		Rahul: For this build, just change only the following variables in local.conf,
	it ~~make~~ the build go faster depending on how many CPUs you have. I		it makes the build go faster depending on how many CPUs you have. I
	have 4, with HT, so I'm changing my values to 8:		have 4, with HT, so I'm changing my values to 8:

Tzanussi at 16:20, 2 April 2011

2011-04-02T16:20:13Z

← Older revision		Revision as of 16:20, 2 April 2011
Line 85:		Line 85:
	PARALLEL_MAKE = "-j 8"		PARALLEL_MAKE = "-j 8"

	Since this is your first build, it won't matter - it will take awhile regardless, but for later builds, to avoid re-downloading all the packages again, you can point the DL_DIR variable in local conf to the downloads dir of a previous build.		Since this is your first build, it won't matter - it will take awhile regardless, but for later builds, to avoid re-downloading all the packages again, you can point the DL_DIR variable in local conf to the downloads dir of a previous build. Continuing the session...

	trz@elmorro:/usr/local/src/Yocto/build/conf$ cd /usr/local/src/Yocto		trz@elmorro:/usr/local/src/Yocto/build/conf$ cd /usr/local/src/Yocto

Tzanussi at 16:19, 2 April 2011

2011-04-02T16:19:28Z

← Older revision		Revision as of 16:19, 2 April 2011
Line 85:		Line 85:
	PARALLEL_MAKE = "-j 8"		PARALLEL_MAKE = "-j 8"

	Since this is your first build, ~~the following doesn~~'t matter, it will take awhile regardless, but for later builds, to avoid re-downloading all the packages again, you can point the DL_DIR variable in local conf to the downloads dir of a previous build.		Since this is your first build, it won't matter - it will take awhile regardless, but for later builds, to avoid re-downloading all the packages again, you can point the DL_DIR variable in local conf to the downloads dir of a previous build.

	trz@elmorro:/usr/local/src/Yocto/build/conf$ cd /usr/local/src/Yocto		trz@elmorro:/usr/local/src/Yocto/build/conf$ cd /usr/local/src/Yocto

Tzanussi at 15:25, 2 April 2011

2011-04-02T15:25:38Z

← Older revision		Revision as of 15:25, 2 April 2011
Line 1:		Line 1:
	Here's a cut-and-paste shell session showing one way to do a start-from-scratch git checkout and build, the end result being a sato desktop in a qemu session (commands also shown for that).		Here's a cut-and-paste shell session showing one way to do a start-from-scratch git checkout and build, the end result being a sato desktop in a qemu session (commands also shown for that).

	One thing to ~~not~~ with this example, is that I'm checking out from poky/bernard, only because when I ~~create~~ this session, poky/master wasn't building for me. Normally, you'd want to use poky/master i.e. in the step below where it says 'git checkout -b bernard-cur poky/bernard' you'd want to do 'git checkout -b master-cur poky/master'. Sometimes it's easier to just use the last known stable version in cases where master is broken and you don't necessarily need master to get your work done.		One thing to note with this example is that I'm checking out from poky/bernard, only because when I created this session, poky/master wasn't building for me. Normally, you'd want to use poky/master i.e. in the step below where it says 'git checkout -b bernard-cur poky/bernard' you'd want to do 'git checkout -b master-cur poky/master'. Sometimes it's easier to just use the last known stable version in cases where master is broken and you don't necessarily need master to get your work done.

	trz@elmorro:/usr/local/src$ mkdir Yocto		trz@elmorro:/usr/local/src$ mkdir Yocto

Tzanussi at 15:20, 2 April 2011

2011-04-02T15:20:51Z

← Older revision		Revision as of 15:20, 2 April 2011
Line 77:		Line 77:
	bblayers.conf local.conf		bblayers.conf local.conf

	To Rahul: For ~~now~~, just change the following variables in local.conf,		Rahul: For this build, just change only the following variables in local.conf,
	it make the build go faster depending on how many CPUs you have. I		it make the build go faster depending on how many CPUs you have. I
	have 4, with HT, so I'm changing my values to 8:		have 4, with HT, so I'm changing my values to 8:

	trz@elmorro:/usr/local/src/Yocto/build/conf$ emacs -nw local.conf		trz@elmorro:/usr/local/src/Yocto/build/conf$ emacs -nw local.conf
Line 85:		Line 85:
	PARALLEL_MAKE = "-j 8"		PARALLEL_MAKE = "-j 8"

			Since this is your first build, the following doesn't matter, it will take awhile regardless, but for later builds, to avoid re-downloading all the packages again, you can point the DL_DIR variable in local conf to the downloads dir of a previous build.

	trz@elmorro:/usr/local/src/Yocto/build/conf$ cd /usr/local/src/Yocto		trz@elmorro:/usr/local/src/Yocto/build/conf$ cd /usr/local/src/Yocto
	trz@elmorro:/usr/local/src/Yocto$ source poky-init-build-env		trz@elmorro:/usr/local/src/Yocto$ source poky-init-build-env

Tzanussi at 15:15, 2 April 2011

2011-04-02T15:15:51Z

← Older revision		Revision as of 15:15, 2 April 2011
Line 1:		Line 1:
			Here's a cut-and-paste shell session showing one way to do a start-from-scratch git checkout and build, the end result being a sato desktop in a qemu session (commands also shown for that).

			One thing to not with this example, is that I'm checking out from poky/bernard, only because when I create this session, poky/master wasn't building for me. Normally, you'd want to use poky/master i.e. in the step below where it says 'git checkout -b bernard-cur poky/bernard' you'd want to do 'git checkout -b master-cur poky/master'. Sometimes it's easier to just use the last known stable version in cases where master is broken and you don't necessarily need master to get your work done.

	trz@elmorro:/usr/local/src$ mkdir Yocto		trz@elmorro:/usr/local/src$ mkdir Yocto
	trz@elmorro:/usr/local/src$ cd Yocto		trz@elmorro:/usr/local/src$ cd Yocto

Tzanussi: Created page with ' trz@elmorro:/usr/local/src$ mkdir Yocto trz@elmorro:/usr/local/src$ cd Yocto trz@elmorro:/usr/local/src/Yocto$ git init Initialized empty Git repository in /usr/local/src/Yoc…'

2011-04-02T15:09:02Z

Created page with ' trz@elmorro:/usr/local/src$ mkdir Yocto trz@elmorro:/usr/local/src$ cd Yocto trz@elmorro:/usr/local/src/Yocto$ git init Initialized empty Git repository in /usr/local/src/Yoc…'

New page

trz@elmorro:/usr/local/src$ mkdir Yocto
trz@elmorro:/usr/local/src$ cd Yocto
trz@elmorro:/usr/local/src/Yocto$ git init
Initialized empty Git repository in /usr/local/src/Yocto/.git/
trz@elmorro:/usr/local/src/Yocto$ git remote add poky git://git.pokylinux.org/poky.git
trz@elmorro:/usr/local/src/Yocto$ git remote update
Fetching poky
remote: Counting objects: 93305, done.
remote: Compressing objects: 100% (28353/28353), done.
remote: Total 93305 (delta 63159), reused 91786 (delta 62057)
Receiving objects: 100% (93305/93305), 61.47 MiB | 506 KiB/s, done.
Resolving deltas: 100% (63159/63159), done.
From git://git.pokylinux.org/poky
* [new branch] bernard -> poky/bernard
* [new branch] bernard-5.0.1 -> poky/bernard-5.0.1
* [new branch] blinky -> poky/blinky
* [new branch] clyde -> poky/clyde
* [new branch] elroy -> poky/elroy
* [new branch] green -> poky/green
* [new branch] laverne -> poky/laverne
* [new branch] master -> poky/master
* [new branch] pinky -> poky/pinky
* [new branch] purple -> poky/purple
* [new tag] bernard-5.0 -> bernard-5.0
* [new tag] pinky-3.1.2 -> pinky-3.1.2
From git://git.pokylinux.org/poky
* [new tag] bernard-1.0rc1 -> bernard-1.0rc1
* [new tag] bernard-5.0-alpha -> bernard-5.0-alpha
* [new tag] bernard-5.0rc1 -> bernard-5.0rc1
* [new tag] bernard-5.0rc2 -> bernard-5.0rc2
* [new tag] laverne-4.0 -> laverne-4.0
* [new tag] laverne-4.0.1 -> laverne-4.0.1
* [new tag] m4 -> m4
* [new tag] purple-3.2 -> purple-3.2
* [new tag] purple-3.2.1 -> purple-3.2.1
trz@elmorro:/usr/local/src/Yocto$ git checkout -b bernard-cur poky/bernard
Branch bernard-cur set up to track remote branch bernard from poky.
Switched to a new branch 'bernard-cur'
trz@elmorro:/usr/local/src/Yocto$ ls
bitbake documentation LICENSE meta meta-demoapps meta-rt poky-init-build-env README README.hardware scripts
trz@elmorro:/usr/local/src/Yocto$ source poky-init-build-env
You had no conf/local.conf file. Poky has created this configuration file for
you with some default values. You may wish to edit it to use a different MACHINE
(target hardware) or enable parallel build options to take advantage of multiple
cores for example. See the file for more information as common configuration
options are commented.

Also, for more information see the Poky Reference Manual:
http://yoctoproject.org/community/documentation

You had no conf/bblayers.conf file. Poky has created this configuration file for
you with some default values. To add additional metadata layers into your
configuration please add entries to this file.

For more information see the Poky Reference Manual:
http://yoctoproject.org/community/documentation

### Shell environment set up for Poky builds. ###

You can now run 'bitbake <target>'

Common targets are:
poky-image-minimal
poky-image-sato
meta-toolchain
meta-toolchain-sdk

You can also run generated qemu images with a command like 'poky-qemu qemux86'

trz@elmorro:/usr/local/src/Yocto/build$ cd conf
trz@elmorro:/usr/local/src/Yocto/build/conf$ ls
bblayers.conf local.conf

To Rahul: For now, just change the following variables in local.conf,
it make the build go faster depending on how many CPUs you have. I
have 4, with HT, so I'm changing my values to 8:

trz@elmorro:/usr/local/src/Yocto/build/conf$ emacs -nw local.conf
BB_NUMBER_THREADS = "8"
PARALLEL_MAKE = "-j 8"

trz@elmorro:/usr/local/src/Yocto/build/conf$ cd /usr/local/src/Yocto
trz@elmorro:/usr/local/src/Yocto$ source poky-init-build-env

### Shell environment set up for Poky builds. ###

You can now run 'bitbake <target>'

Common targets are:
poky-image-minimal
poky-image-sato
meta-toolchain
meta-toolchain-sdk

You can also run generated qemu images with a command like 'poky-qemu qemux86'

trz@elmorro:/usr/local/src/Yocto/build$ bitbake poky-image-sato
Pseudo is not present but is required, building this first before the main build
NOTE: Out of date cache found, rebuilding...
Parsing recipes: 100% |#################################################################################################| Time: 00:00:52
Parsing of 783 .bb files complete (0 cached, 783 parsed). 991 targets, 11 skipped, 0 masked, 0 errors.

OE Build Configuration:
BB_VERSION = "1.11.0"
METADATA_BRANCH = "bernard-cur"
METADATA_REVISION = "8b6416db1e04af83ecdf57522240ac859d5d8031"
TARGET_ARCH = "i586"
TARGET_OS = "linux"
MACHINE = "qemux86"
DISTRO = "poky"
DISTRO_VERSION = "1.0"
TARGET_FPU = ""

NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Running task 1 of 88 (ID: 21, /usr/local/src/Yocto/meta/recipes-devtools/quilt/quilt-native_0.48.bb, do_setscene)
NOTE: Running task 2 of 88 (ID: 61, virtual:native:/usr/local/src/Yocto/meta/recipes-devtools/gnu-config/gnu-config_20080123.bb, do_setscene)
NOTE: Running task 3 of 88 (ID: 77, /usr/local/src/Yocto/meta/recipes-devtools/m4/m4-native_1.4.15.bb, do_setscene)
NOTE: Running task 4 of 88 (ID: 37, virtual:native:/usr/local/src/Yocto/meta/recipes-devtools/autoconf/autoconf_2.65.bb, do_setscene)
NOTE: Running task 5 of 88 (ID: 45, virtual:native:/usr/local/src/Yocto/meta/recipes-devtools/automake/automake_1.11.1.bb, do_setscene)
NOTE: Running task 6 of 88 (ID: 53, /usr/local/src/Yocto/meta/recipes-devtools/libtool/libtool-native_2.4.bb, do_setscene)
NOTE: Running task 7 of 88 (ID: 85, virtual:native:/usr/local/src/Yocto/meta/recipes-devtools/tcltk/tcl_8.5.9.bb, do_setscene)
NOTE: Running task 8 of 88 (ID: 69, virtual:native:/usr/local/src/Yocto/meta/recipes-core/gettext/gettext_0.17.bb, do_setscene)
NOTE: package quilt-native-0.48-r0: task do_setscene: Started
NOTE: package quilt-native-0.48-r0: task do_setscene: Succeeded
NOTE: package m4-native-1.4.15-r0: task do_setscene: Started
NOTE: package m4-native-1.4.15-r0: task do_setscene: Succeeded
NOTE: Running task 9 of 88 (ID: 20, /usr/local/src/Yocto/meta/recipes-devtools/quilt/quilt-native_0.48.bb, do_fetch)
NOTE: Running task 10 of 88 (ID: 76, /usr/local/src/Yocto/meta/recipes-devtools/m4/m4-native_1.4.15.bb, do_fetch)
.
.
.
NOTE: Running task 4960 of 4961 (ID: 9, /usr/local/src/Yocto/meta/recipes-sato/images/poky-image-sato.bb, do_rootfs)
NOTE: package poky-image-sato-1.0-r0: task do_rootfs: Started
NOTE: package poky-image-sato-1.0-r0: task do_rootfs: Succeeded
NOTE: Running noexec task 4961 of 4961 (ID: 4, /usr/local/src/Yocto/meta/recipes-sato/images/poky-image-sato.bb, do_build)
NOTE: Tasks Summary: Attempted 4961 tasks of which 4959 didn't need to be rerun and 0 failed.
trz@elmorro:/usr/local/src/Yocto/build$

trz@elmorro:/usr/local/src/Yocto/build$ poky-qemu qemux86

Continuing with the following parameters:
KERNEL: [/usr/local/src/Yocto/build/tmp/deploy/images/bzImage-qemux86.bin]
ROOTFS: [/usr/local/src/Yocto/build/tmp/deploy/images/poky-image-sato-qemux86.ext3]
FSTYPE: [ext3]
Setting up tap interface under sudo
[sudo] password for trz:
Acquiring lockfile for tap0...
Starting distccd...
Running qemu...
/usr/local/src/Yocto/build/tmp/sysroots/x86_64-linux/usr/bin/qemu -kernel /usr/local/src/Yocto/build/tmp/deploy/images/bzImage-qemux86.bin -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=no,downscript=no -hda /usr/local/src/Yocto/build/tmp/deploy/images/poky-image-sato-qemux86.ext3 -show-cursor -usb -usbdevice wacom-tablet -vga vmware -enable-gl -no-reboot --append "vga=0 root=/dev/hda mem=128M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 "
vmsvga_value_write: guest runs Linux.
Set 'tap0' nonpersistent
Releasing lockfile of preconfigured tap device 'tap0'
trz@elmorro:/usr/local/src/Yocto/build$