Yocto Project - User contributions [en]

Posix result

2020-04-10T01:25:43Z

Yzhao: /* Overall trend */

==Introduction==
The Open POSIX* Test Suite is an open source test suite with the goal of performing conformance, functional, stress, and performance testing of the functions described in the IEEE Std 1003.1-2001 System Interfaces specification. Eventual testing of the full specification is desired (http://posixtest.sourceforge.net/)

Similar to [[https://wiki.yoctoproject.org/wiki/LTP_result LTP result]], embedded linux distribution is highly customized for a specific purpose, and thus both the kernel and base environment may not satisfy the posix requirement. So the major purposes of this work are:
* to understand the reasons for existing posix failures. If the cause is from a specific package itself, go to fix it. Or else if the error simply come from the fact that a given package doesn't exist in current profile, add the explanation here
* to track poix test results cross Yocto releases, and ensure a declining error number for same profile
* to be the reference if Yocto users want to get a base picture

There is one bugzilla entry related:
http://bugzilla.pokylinux.org/show_bug.cgi?id=172

==Overall trend==

Overall trend tends to track the change of posix test results along with Yocto's progress.

In below table we list total POSIX failures for each architectures in each milestone: (now this wiki doesn't allow upload files. So for detail logs please refer to earlier bug link)

{|border="1"
|| '''Milestone''' || '''qemux86''' || '''qemu-x86_64''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''atom-pc''' || '''sugarbay''' || '''blacksand''' || '''beagleboard''' || '''routerstation''' || '''mpc8315e-rdb''' || ''' huronriver''' || '''edgerouter''' || '''beaglebone''' || '''genericx86-64'''
|-
|| 3.1 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 49 || 47 ||
|-
|| 3.0 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 49 || 47 ||
|-
|| 2.7 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 49 || 47 ||
|-
|| 2.7 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 49 || 47 ||
|-
|| 2.7 M2 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 49 || n/a || 50 || 47 ||
|-
|| 2.7 M1 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 51 || 47 ||
|-
|| 2.6 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 50 || 47 ||
|-
|| 2.6 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 50 || 47 ||
|-
|| 2.6 M2 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 51 || 48 ||
|-
|| 2.6 M1 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || n/a || 47 ||
|-
|| 2.5 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 48 || 45 ||
|-
|| 2.5 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 44 ||
|-
|| 2.5 M2 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 44 ||
|-
|| 2.5 M1 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 45 || 47
|-
|| 2.5 M1 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 45 ||
|-
|| 2.4 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 45 || 46
|-
|| 2.4 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || || 45 || 46
|-
|| 2.4 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 45 || 46
|-
|| 2.4 M2 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 46 || 45 || 46
|-
|| 2.4 M2 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 46 || 45 || 46
|-
|| 2.4 M1 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 46 || 45 || 45
|-
|| 2.3 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 46 || n/a || 46 || 45 || 45
|-
|| 2.3 M3 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 46 || n/a || 46 || 45 || 45
|-
|| 2.3 M2 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 46 || 46
|-
|| 2.3 M1 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 46 || 46
|-
|| 2.2 RC4 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 46 || 46
|-
|| 2.2 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 46 || 46
|-
|| 2.2 M2 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 48 || 46 || 46
|-
|| 2.0 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 43 || n/a || 44 || 41 || 44
|-
|| 2.0 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 43 || n/a || 44 || 42 || 44
|-
|| 1.9 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 43 || n/a || 44 || 41 || 44
|-
|| 1.9 M2 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 44 || 47
|-
|| 1.9 M1 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 46 || n/a || 47 || 44 || 47
|-
|| 1.8 M4 RC2 20150403 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 46 || n/a || 48 || 44 || 47
|-
|| 1.8 M3 RC3 20150303 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 44 || 47
|-
|| 1.7 M4 RC5 20141018 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 45 || 47
|-
|| 1.7 M4 RC4 20141011 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 49 || 45 || 47
|-
|| 1.7 M2 RC1 20140730 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 49 || n/a || 50 || 48 || 48
|-
|| 1.7 M1 RC1 20140625 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 50 || n/a || 52 || 48 || 48
|-
|| 1.5.2 RC3 20140428 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 41 || 44 || 43 || n/a || n/a || n/a || 41
|-
|| 1.6 M5 RC4 20140411 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 51 || || 45
|-
|| 1.6 M5 RC2 20140402 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 51 || || 45
|-
|| 1.6 M5 RC1 20140326 || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 45 || 46 || 47 || n/a
|-
|| 1.6 M4 RC1 20140312 || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 46 || 46 || 47 || n/a
|-
|| 1.6 M3 RC2 20140218 || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 45 || 49 || 47 || n/a
|-
|| 1.6 M3 RC1 20140213 || n/a || n/a || n/a || n/a || n/a || n/a || || n/a || 41 || 43 || 42 || n/a
|-
|| 1.6 M2 RC1 20140114 || n/a || n/a || n/a || n/a || n/a || n/a || 41 || n/a || 41 || 43 || 42 || n/a
|-
|| 1.5.1 RC2 20131213 || n/a || n/a || n/a || n/a || n/a || n/a || || n/a || 41 || 44 || 43 || n/a
|-
|| 1.6 M1 RC1 20131203 || n/a || n/a || n/a || n/a || n/a || n/a || 41 || n/a || n/a || 42 || 42 || n/a
|-
|| 1.5 M5 RC6 || n/a || n/a || n/a || n/a || n/a || n/a || 41 || n/a || 41 || 44 || 43 || n/a
|-
|| 1.5 M4 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || 41 || n/a || n/a || 45 || 43 || n/a
|-
|| 1.5 M4 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || 41 || n/a || n/a || 43 || 44 || n/a
|-
|| 1.5 M2 RC1 20130703 || n/a || n/a || n/a || n/a || n/a || n/a || 31 || n/a || n/a || n/a || 41 || n/a
|-
|| 1.4.1 RC1 20130612 || n/a || n/a || n/a || n/a || n/a || n/a || 122 || n/a || 124 || 126 || 124 || n/a
|-
|| 1.5 M1 RC1 20130604 || n/a || n/a || n/a || n/a || n/a || n/a || 119 || n/a || 119 || n/a || 120 || n/a
|-
|| 1.3.2 20130516 || n/a || n/a || n/a || n/a || n/a || n/a || 122 || n/a || 123 || 124 || 124 || n/a
|-
|| 1.4 M6 RC2 20130418 || n/a || n/a || n/a || n/a || n/a || n/a || 122 || n/a || 123 || 126 || 124 || n/a
|-
|| 1.4 M5 RC3 20130403 || n/a || n/a || n/a || n/a || n/a || n/a || 122 || n/a || 123 || n/a || 124 || n/a
|-
|| 1.4 M5 RC2 20130327 || n/a || n/a || n/a || n/a || n/a || n/a || 122 || n/a || 123 || 124 || 124 || n/a
|-
|| 1.4 M5 RC2 20130327 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 124 || 124 ||
|-
|| 1.4 M4 RC1 20130220 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 124 || 126 || 124 || 122
|-
|| 1.4 M3 RC2 20130131 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 124 || 124 || 122
|-
|| 1.4 M3 RC1 20130122 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 124 || 124 || 122
|-
|| 1.2.2 20130105 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 128 || 130 || 127 ||
|-
|| 1.2.2 20121206 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 127 || 129 || 126 || 128
|-
|| 1.4 M1 RC1 20121128 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 125 || 124 ||
|-
|| 1.2.2 20121018 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 124 || 126 || 124 || 122
|-
|| 1.3 M5 RC4 20121010 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 123 || 124 || 124 || 122
|-
|| 1.3 M5 RC3 20121003 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 122 || 124 || 127 || 124 || 122
|-
|| 1.3 M5 RC2 20120926 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 122 || 125 || 125 || 124 || 122
|-
|| 1.3 M4 RC3 20120916 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 124 || 124 || 123 || 122
|-
|| 1.3 M3 RC2 20120814 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 124 || 122 || 123 || 123
|-
|| 1.3 M2 20120802 || n/a || n/a || n/a || n/a || n/a || n/a || 124 || n/a || 125 || 123 || 123 || 123
|-
|| 1.3 M2 RC1 20120712 || n/a || n/a || n/a || n/a || n/a || n/a || 126 || n/a || 126 || 128 || n/a || 127
|-
|| 1.1.2 20120630 || n/a || n/a || n/a || n/a || n/a || n/a || 128 || n/a || 162 || 167 || 126 || n/a
|-
|| 1.2.1 20120629 || n/a || n/a || n/a || n/a || n/a || n/a || 128 || 125 || 125 || 129 || 126 || 130
|-
|| 1.2 denzil meta-intel || n/a || n/a || n/a || n/a || n/a || n/a || 126 || 126 || n/a || n/a || n/a || 129
|-
|| 1.3 M1 RC1 20120613 || n/a || n/a || n/a || n/a || n/a || n/a || 125 || 125 || 126 || 129 || 126 || 127
|-
|| 1.3 20120606 build || n/a || n/a || n/a || n/a || n/a || n/a || 126 || 125 || 125 || 126 || 126 || n/a
|-
|| Denzil 1.2 RC5 || n/a || n/a || n/a || n/a || n/a || n/a || 128 || 125 || 126 || 129 || 126 || n/a
|-
|| Denzil 1.2 RC4 || n/a || n/a || n/a || n/a || n/a || n/a || 128 || 126 || 126 || 128 || 127 || n/a
|-
|| 1.2 M4 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || 127 || 128 || 125 || n/a || 126 || n/a
|-
|| 1.2 M4 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || 127 || 125 || 127 || 130 || 126 || n/a
|-
|| 1.2 M4 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || 129 || 126 || 127 || 130 || 126 || n/a
|-
|| 1.2 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || 130 || 127 || 129 || 132 || 126 || n/a
|-
|| 1.1.1 || n/a || n/a || n/a || n/a || n/a || n/a || 10 || 9 || 31 || 33 || 32 || n/a
|-
|| 1.2 M2 RC1(****) || n/a || n/a || n/a || n/a || n/a || n/a || 130 || 128 || 131 || 132 || 128 || n/a
|-
|| 1.2 M1 RC2(***) || n/a || n/a || 90 || 92 || 92 || n/a || 98 || 98 || 91 || 92 || 89 || n/a
|-
|| 1.0.2 || n/a || n/a || 35 || 32 || 33 || n/a || || || 30 || 71 || 34 || n/a
|-
|| 1.1 M4 RC4 || n/a || n/a || 31 || 33 || 32 || n/a || 25 || 25 || 30 || 31 || 32 || n/a
|-
|| 1.1 M4 RC3 || n/a || n/a || 32 || 35 || 33 || n/a || 24 || 23 || 37 || 33 || 31 || n/a
|-
|| 1.1 M4 RC2 || n/a || n/a || 31 || 34 || 34 || n/a || 25 || 24 || 31 || 33 || 32 || n/a
|-
|| 1.1 M3 || n/a || n/a || 32 || 34 || 34 || n/a || 23 || 24 || 30 || 32 || 31 || n/a
|-
|| 1.1 M2 || n/a || n/a || 30 || 34 || 32 || n/a || 31 || 26 || 32 || 69 || 33 || n/a
|-
|| 1.1 M1(**) || n/a || n/a || 35 || 49 || 43 || n/a || 50 || 48 || 46 || 84 || 49 || n/a
|-
|| 1.0-M2 (*) || 1744 || 1744 || 1745 || 1750 || 1753 || 1753 || n/a || 1744 || 1755 || 1754 || n/a || n/a
|}
*: 1.0-M2 misses some link flags, and thus many unexpected link failures observed
**: 1.1 M1 has gcc upgrade from 4.5.1 to 4.6.1, which has two new options, -Wunused-but-set-variable and -Waddress enabled by default. They casused many cases failed. We need add -Wno-unused-but-set-variable and -Wno-address to fix the problems.
***: From 1.2, We using POSIX test suite in LTP test suite instead of POSIX test suite 1.5.2.
****: From 1.2 M2, We also test AIO.
general tips:
* use "-m 512" to launch the qemu targets
* make sure below line is uncommented in LDFLAGS file:
#-D_XOPEN_SOURCE=600 -lpthread -lrt -lm
* don't test AIO as the test cases themselves have compilation warnings which are treated as errors (use 'exit' while doesn't include stdlib.h)

==Result analysis==
Current results are base on Yocto 3.1 and POSIX test suite in LTP release 20200120.
After analysis every test case except PASS will be list here, whether a patch will be gave to fix it or put the case to blacklist with a explanation.

POSIX test results: https://wiki.yoctoproject.org/wiki/POSIX-results

==Test environment==
'''OpenPOSIX version''': posixtestsuite in LTP release 20200120

'''profile''': core-image-sato-sdk

'''run command''': cd /opt/ltp/testcases/open_posix_testsuite;
make generate-makefiles;
make conformance-all conformance-test;
make tools-all;
bin/run-posix-option-group-test.sh [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

==Current Milestone (Yocto 3.1 RC2 build)==

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 49 || n/a
|}

==Previous Milestone==

===Yocto 3.0 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 49 || 48
|}

===Yocto 2.7 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 49 || 48
|}

===Yocto 2.7 M3 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 49 || 48
|}

===Yocto 2.7 M2 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 50 || 49
|}

===Yocto 2.7 M1 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 51 || 48
|}

===Yocto 2.6 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 50 || 48
|}

===Yocto 2.6 M3 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 50 || 48
|}

===Yocto 2.6 M2 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 48 || 51 || 48
|}

===Yocto 2.6 M1 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || || 48
|}

===Yocto 2.5 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 45 || 48 || 47
|}

===Yocto 2.5 M3 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 44 || 47 || 45
|}

===Yocto 2.5 M2 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 44 || 47 || 45
|}

===Yocto 2.5 M1 RC3 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 45 || 47 || 45
|}

===Yocto 2.5 M1 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 45 || 47 || 45
|}

===Yocto 2.4 RC3 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 45 || 47 || 45
|}

===Yocto 2.4 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 45 || || 45
|}

===Yocto 2.4 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 45 || 47 || 45
|}

===Yocto 2.4 M2 RC3 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 45 || 46 || 45
|}

===Yocto 2.4 M2 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 45 || 46 || 45
|}

===Yocto 2.4 M1 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 45 || 45 || 46 || 45
|}

===Yocto 2.3 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 45 || 45 || 46 || 46
|}

===Yocto 2.3 M3 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 45 || 45 || 46 || 46
|}

===Yocto 2.3 M2 RC3 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 46 || 47 || 47
|}

===Yocto 2.3 M1 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 46 || 47 || 47
|}

===Yocto 2.2 RC4 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 46 || 47 || 47
|}

===Yocto 2.2 M3 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 46 || 47 || 47
|}

===Yocto 2.2 M2 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 46 || 48 || 47
|}

===Yocto 2.0 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 44 || 41 || 44 || 43
|}

===Yocto 2.0 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 44 || 42 || 44 || 43
|}

===Yocto 1.9 M3 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 44 || 41 || 44 || 43
|}

===Yocto 1.9 M2 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 44 || 47 || 47
|}

===Yocto 1.9 M1 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 44 || 47 || 46
|}

===Yocto 1.8 M4 RC2 20150403 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 44 || 48 || 46
|}

===Yocto 1.8 M3 RC3 20150303 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 44 || 47 || 47
|}

===Yocto 1.7 M4 RC5 20141018 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 45 || 47 || 47
|}

===Yocto 1.7 M4 RC4 20141011 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 45 || 49 || 47
|}

===Yocto 1.7 M2 RC1 20140730 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 48 || 48 || 50 || 49
|}

===Yocto 1.7 M1 RC1 20140625 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 48 || 48 || 52 || 50
|}

===Yocto 1.6 M5 RC4 20140411 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 45 || || 51 || 47
|}

===Yocto 1.6 M5 RC2 20140402 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 45 || || 51 || 47
|}

===Yocto 1.6 M5 RC1 20140326 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 45 || n/a || 47 || 45 || 46 || n/a
|}

===Yocto 1.6 M4 RC1 20140312 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 45 || n/a || 47 || 46 || 46 || n/a
|}

===Yocto 1.6 M3 RC2 20140218 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 45 || n/a || 47 || 45 || 49 || n/a
|}

===Yocto 1.6 M3 RC1 20140213 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || || n/a || 42 || 41 || 43 || n/a
|}

===Yocto 1.6 M2 RC1 20140114 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 41 || n/a || 42 || 41 || 43 || n/a
|}

===Yocto 1.6 M1 RC1 20131203 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 41 || n/a || 42 || n/a || 42 || n/a
|}

===Yocto 1.5.1 RC2 20131213 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || || n/a || 43 || 41 || 44 || n/a
|}

===Yocto 1.5 M5 RC6 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 41 || n/a || 43 || 41 || 44 || n/a
|}

===Yocto 1.5 M4 RC3 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 41 || n/a || 43 || n/a || 45 || n/a
|}

===Yocto 1.5 M4 RC2 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 41 || n/a || 44 || n/a || 43 || n/a
|}

===Yocto 1.5 M2 RC1 20130703 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 31 || n/a || 41 || n/a || n/a || n/a
|}

===Yocto 1.4.1 RC1 20130612 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 122 || n/a || 124 || 124 || 126 || n/a
|}

===Yocto 1.5 M1 RC1 20130604 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 119 || n/a || 120 || 119 || n/a || n/a
|}

===Yocto 1.3.2 20130516 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 122 || n/a || 124 || 123 || 124 || n/a
|}

===Yocto 1.4 M6 RC2 20130418 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 122 || n/a || 124 || 123 || 126 || n/a
|}

===Yocto 1.4 M5 RC3 20130403 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 122 || n/a || 124 || 123 || n/a || n/a
|}

===Yocto 1.4 M5 RC2 20130327 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || n/a || 124 || 123 || 124 ||
|}

===Yocto 1.4 M4 RC1 20130220 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || n/a || 124 || 124 || 126 || 122
|}

===Yocto 1.4 M3 RC2 20130131 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || n/a || 124 || 123 || 124 || 122
|}

===Yocto 1.4 M3 RC1 20130122 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || n/a || 124 || 123 || 124 || 122
|}

===Yocto 1.4 M1 RC1 20121128 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || n/a || 124 || 123 || 125 ||
|}

===Yocto 1.3 M5 RC4 20121010 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || 123 || 123 || 124 || 124 || 122
|}

===Yocto 1.3 M5 RC3 20121003 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || 122 || 124 || 127 || 124 || 122
|}

===Yocto 1.3 M5 RC2 20120926 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120614

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || 122 || 124 || 125 || 125 || 122
|}

===Yocto 1.3 M4 RC3 20120916 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120614

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || || 123 || 123 || 124 || 124 || 122
|}

===Yocto 1.3 M3 RC2 20120814 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120617

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || || || 123 || 124 || 122 || 123
|}

===Yocto 1.3 M2 20120802 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120617

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 124 || n/a || 123 || 125 || 123 || 123
|}

===Yocto 1.3 M2 RC1 20120712 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 126 || n/a || n/a || 126 || 128 || 127
|}

===Yocto 1.2.1 20120629 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 128 || 125 || 126 || 125 || 129 || 130
|}

===Yocto 1.2 Denzil meta-intel ===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''git info''':

Tree/Branch: poky/denzil

Commit: 7552ccd06c6327b5f36ee0cceb432946f8e98d3f

Meta-intel branch: denzil

Commit: a79035a584cd618d7202ce006cfb2d714a0ce717

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''huronriver'''
|-
|| failures || 126 || 126 || 129
|}

===Yocto 1.3 M1 RC1 20120613 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || '''huronriver'''
|-
|| failures || 125 || 125 || 126 || 126 || 129 || 127
|}

===Yocto 1.3 20120606 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 126 || 125 || 126 || 125 || 126
|}

===Yocto 1.2 Denzil RC5===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures ||128 || 125 || 126 || 126 || 129
|}

===Yocto 1.2 Denzil RC4 ===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 128 || 126 || 127 || 126 || 128
|}

===Yocto 1.2 M4 RC3===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 127 || 128 || 125 || n/a || 126
|}

===Yocto 1.2 M4 RC2===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 127 || 125 || 126 || 127 || 130
|}
===Yocto 1.2 M4 RC1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120104

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 129 || 126 || 126 || 127 || 130
|}
===Yocto 1.2 M3 RC1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120104

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 130 || 127 || 126 || 129 || 132
|}

===Yocto 1.1.1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 10 || 9 || 32 || 31 || 33
|}

===Yocto 1.2 M2 RC1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20110915

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 128 || 130 || 128 || 131 || 132
|}

===Yocto 1.2 M1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20110915

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 98 || 98 || 90 || 92 || 92 || 89 || 91 || 92
|}

===Yocto 1.0.2===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': poky-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || || || 35 || 32 || 33 || 34 || 30 || 71
|}

===Yocto 1.1 M4 RC4===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 25 || 25 || 31 || 33 || 32 || 32 || 30 || 31
|}

===Yocto 1.1 M4 RC3===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 24 || 23 || 32 || 35 || 33 || 31 || 37 || 33
|}

===Yocto 1.1 M4 RC2===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 25 || 24 || 31 || 34 || 34 || 32 || 31 || 33
|}

===Yocto 1.1 M3===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || || || 32 || 34 || 34 || 31 || 30 || 32
|}

===Yocto 1.1 M2===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 31 || 26 || 30 || 34 || 32 || 33 || 32 || 69
|}

===Yocto 1.1 M1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 50 || 48 || 35 || 49 || 43 || 49 || 46 || 84
|}

===Yocto 1.0 M2===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': poky-image-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''qemux86''' || '''qemu-x86_64''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''atom-pc''' || '''blacksand''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 1744 || 1744 || 1745 || 1750 || 1753 || 1753 || 1744 || 1755 || 1754
|}

The major problem for high failure numbers here is due to one environmental issue. It's suggested to uncomment below line from LDFLAGS file:
#-D_XOPEN_SOURCE=600 -lpthread -lrt -lm
libpthread and librt are critical for posix interface test. Without doing this the majority of the failures are link failures being failed to find necessary libraries.
My quick test on qemux86 shows that the failure could be reduced a lot to <200 in a rough run

Based on above fact, no more analysis is done on 1.0-M2 posix results. The thorough analysis will be postponed to 1.0-M3 which will use the right test steps and newer 2.6.37 kernel

Posix result

2020-04-10T01:25:09Z

Yzhao: /* Overall trend */

==Introduction==
The Open POSIX* Test Suite is an open source test suite with the goal of performing conformance, functional, stress, and performance testing of the functions described in the IEEE Std 1003.1-2001 System Interfaces specification. Eventual testing of the full specification is desired (http://posixtest.sourceforge.net/)

Similar to [[https://wiki.yoctoproject.org/wiki/LTP_result LTP result]], embedded linux distribution is highly customized for a specific purpose, and thus both the kernel and base environment may not satisfy the posix requirement. So the major purposes of this work are:
* to understand the reasons for existing posix failures. If the cause is from a specific package itself, go to fix it. Or else if the error simply come from the fact that a given package doesn't exist in current profile, add the explanation here
* to track poix test results cross Yocto releases, and ensure a declining error number for same profile
* to be the reference if Yocto users want to get a base picture

There is one bugzilla entry related:
http://bugzilla.pokylinux.org/show_bug.cgi?id=172

==Overall trend==

Overall trend tends to track the change of posix test results along with Yocto's progress.

In below table we list total POSIX failures for each architectures in each milestone: (now this wiki doesn't allow upload files. So for detail logs please refer to earlier bug link)

{|border="1"
|| '''Milestone''' || '''qemux86''' || '''qemu-x86_64''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''atom-pc''' || '''sugarbay''' || '''blacksand''' || '''beagleboard''' || '''routerstation''' || '''mpc8315e-rdb''' || ''' huronriver''' || '''edgerouter''' || '''beaglebone''' || '''genericx86-64'''
|-
|| 3.1 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 49 || 47 ||
|-
|| 3.0 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 49 || 47 ||
|-
|| 2.7 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 49 || 47 ||
|-
|| 2.7 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 49 || 47 ||
|-
|| 2.7 M2 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 49 || n/a || 50 || 47 ||
|-
|| 2.7 M1 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 51 || 47 ||
|-
|| 2.6 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 50 || 47 ||
|-
|| 2.6 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 50 || 47 ||
|-
|| 2.6 M2 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 51 || 48 ||
|-
|| 2.6 M1 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || n/a || 47 ||
|-
|| 2.5 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 48 || 45 ||
|-
|| 2.5 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 44 ||
|-
|| 2.5 M2 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 44 ||
|-
|| 2.5 M1 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 45 || 47
|-
|| 2.5 M1 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 45 ||
|-
|| 2.4 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 45 || 46
|-
|| 2.4 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || || 45 || 46
|-
|| 2.4 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 45 || 46
|-
|| 2.4 M2 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 46 || 45 || 46
|-
|| 2.4 M2 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 46 || 45 || 46
|-
|| 2.4 M1 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 46 || 45 || 45
|-
|| 2.3 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 46 || n/a || 46 || 45 || 45
|-
|| 2.3 M3 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 46 || n/a || 46 || 45 || 45
|-
|| 2.3 M2 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 46 || 46
|-
|| 2.3 M1 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 46 || 46
|-
|| 2.2 RC4 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 46 || 46
|-
|| 2.2 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 46 || 46
|-
|| 2.2 M2 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 48 || 46 || 46
|-
|| 2.0 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 43 || n/a || 44 || 41 || 44
|-
|| 2.0 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 43 || n/a || 44 || 42 || 44
|-
|| 1.9 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 43 || n/a || 44 || 41 || 44
|-
|| 1.9 M2 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 44 || 47
|-
|| 1.9 M1 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 46 || n/a || 47 || 44 || 47
|-
|| 1.8 M4 RC2 20150403 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 46 || n/a || 48 || 44 || 47
|-
|| 1.8 M3 RC3 20150303 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 44 || 47
|-
|| 1.7 M4 RC5 20141018 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 45 || 47
|-
|| 1.7 M4 RC4 20141011 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 49 || 45 || 47
|-
|| 1.7 M2 RC1 20140730 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 49 || n/a || 50 || 48 || 48
|-
|| 1.7 M1 RC1 20140625 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 50 || n/a || 52 || 48 || 48
|-
|| 1.5.2 RC3 20140428 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 41 || 44 || 43 || n/a || n/a || n/a || 41
|-
|| 1.6 M5 RC4 20140411 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 51 || || 45
|-
|| 1.6 M5 RC2 20140402 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 51 || || 45
|-
|| 1.6 M5 RC1 20140326 || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 45 || 46 || 47 || n/a
|-
|| 1.6 M4 RC1 20140312 || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 46 || 46 || 47 || n/a
|-
|| 1.6 M3 RC2 20140218 || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 45 || 49 || 47 || n/a
|-
|| 1.6 M3 RC1 20140213 || n/a || n/a || n/a || n/a || n/a || n/a || || n/a || 41 || 43 || 42 || n/a
|-
|| 1.6 M2 RC1 20140114 || n/a || n/a || n/a || n/a || n/a || n/a || 41 || n/a || 41 || 43 || 42 || n/a
|-
|| 1.5.1 RC2 20131213 || n/a || n/a || n/a || n/a || n/a || n/a || || n/a || 41 || 44 || 43 || n/a
|-
|| 1.6 M1 RC1 20131203 || n/a || n/a || n/a || n/a || n/a || n/a || 41 || n/a || n/a || 42 || 42 || n/a
|-
|| 1.5 M5 RC6 || n/a || n/a || n/a || n/a || n/a || n/a || 41 || n/a || 41 || 44 || 43 || n/a
|-
|| 1.5 M4 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || 41 || n/a || n/a || 45 || 43 || n/a
|-
|| 1.5 M4 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || 41 || n/a || n/a || 43 || 44 || n/a
|-
|| 1.5 M2 RC1 20130703 || n/a || n/a || n/a || n/a || n/a || n/a || 31 || n/a || n/a || n/a || 41 || n/a
|-
|| 1.4.1 RC1 20130612 || n/a || n/a || n/a || n/a || n/a || n/a || 122 || n/a || 124 || 126 || 124 || n/a
|-
|| 1.5 M1 RC1 20130604 || n/a || n/a || n/a || n/a || n/a || n/a || 119 || n/a || 119 || n/a || 120 || n/a
|-
|| 1.3.2 20130516 || n/a || n/a || n/a || n/a || n/a || n/a || 122 || n/a || 123 || 124 || 124 || n/a
|-
|| 1.4 M6 RC2 20130418 || n/a || n/a || n/a || n/a || n/a || n/a || 122 || n/a || 123 || 126 || 124 || n/a
|-
|| 1.4 M5 RC3 20130403 || n/a || n/a || n/a || n/a || n/a || n/a || 122 || n/a || 123 || n/a || 124 || n/a
|-
|| 1.4 M5 RC2 20130327 || n/a || n/a || n/a || n/a || n/a || n/a || 122 || n/a || 123 || 124 || 124 || n/a
|-
|| 1.4 M5 RC2 20130327 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 124 || 124 ||
|-
|| 1.4 M4 RC1 20130220 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 124 || 126 || 124 || 122
|-
|| 1.4 M3 RC2 20130131 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 124 || 124 || 122
|-
|| 1.4 M3 RC1 20130122 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 124 || 124 || 122
|-
|| 1.2.2 20130105 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 128 || 130 || 127 ||
|-
|| 1.2.2 20121206 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 127 || 129 || 126 || 128
|-
|| 1.4 M1 RC1 20121128 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 125 || 124 ||
|-
|| 1.2.2 20121018 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 124 || 126 || 124 || 122
|-
|| 1.3 M5 RC4 20121010 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 123 || 124 || 124 || 122
|-
|| 1.3 M5 RC3 20121003 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 122 || 124 || 127 || 124 || 122
|-
|| 1.3 M5 RC2 20120926 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 122 || 125 || 125 || 124 || 122
|-
|| 1.3 M4 RC3 20120916 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 124 || 124 || 123 || 122
|-
|| 1.3 M3 RC2 20120814 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 124 || 122 || 123 || 123
|-
|| 1.3 M2 20120802 || n/a || n/a || n/a || n/a || n/a || n/a || 124 || n/a || 125 || 123 || 123 || 123
|-
|| 1.3 M2 RC1 20120712 || n/a || n/a || n/a || n/a || n/a || n/a || 126 || n/a || 126 || 128 || n/a || 127
|-
|| 1.1.2 20120630 || n/a || n/a || n/a || n/a || n/a || n/a || 128 || n/a || 162 || 167 || 126 || n/a
|-
|| 1.2.1 20120629 || n/a || n/a || n/a || n/a || n/a || n/a || 128 || 125 || 125 || 129 || 126 || 130
|-
|| 1.2 denzil meta-intel || n/a || n/a || n/a || n/a || n/a || n/a || 126 || 126 || n/a || n/a || n/a || 129
|-
|| 1.3 M1 RC1 20120613 || n/a || n/a || n/a || n/a || n/a || n/a || 125 || 125 || 126 || 129 || 126 || 127
|-
|| 1.3 20120606 build || n/a || n/a || n/a || n/a || n/a || n/a || 126 || 125 || 125 || 126 || 126 || n/a
|-
|| Denzil 1.2 RC5 || n/a || n/a || n/a || n/a || n/a || n/a || 128 || 125 || 126 || 129 || 126 || n/a
|-
|| Denzil 1.2 RC4 || n/a || n/a || n/a || n/a || n/a || n/a || 128 || 126 || 126 || 128 || 127 || n/a
|-
|| 1.2 M4 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || 127 || 128 || 125 || n/a || 126 || n/a
|-
|| 1.2 M4 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || 127 || 125 || 127 || 130 || 126 || n/a
|-
|| 1.2 M4 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || 129 || 126 || 127 || 130 || 126 || n/a
|-
|| 1.2 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || 130 || 127 || 129 || 132 || 126 || n/a
|-
|| 1.1.1 || n/a || n/a || n/a || n/a || n/a || n/a || 10 || 9 || 31 || 33 || 32 || n/a
|-
|| 1.2 M2 RC1(****) || n/a || n/a || n/a || n/a || n/a || n/a || 130 || 128 || 131 || 132 || 128 || n/a
|-
|| 1.2 M1 RC2(***) || n/a || n/a || 90 || 92 || 92 || n/a || 98 || 98 || 91 || 92 || 89 || n/a
|-
|| 1.0.2 || n/a || n/a || 35 || 32 || 33 || n/a || || || 30 || 71 || 34 || n/a
|-
|| 1.1 M4 RC4 || n/a || n/a || 31 || 33 || 32 || n/a || 25 || 25 || 30 || 31 || 32 || n/a
|-
|| 1.1 M4 RC3 || n/a || n/a || 32 || 35 || 33 || n/a || 24 || 23 || 37 || 33 || 31 || n/a
|-
|| 1.1 M4 RC2 || n/a || n/a || 31 || 34 || 34 || n/a || 25 || 24 || 31 || 33 || 32 || n/a
|-
|| 1.1 M3 || n/a || n/a || 32 || 34 || 34 || n/a || 23 || 24 || 30 || 32 || 31 || n/a
|-
|| 1.1 M2 || n/a || n/a || 30 || 34 || 32 || n/a || 31 || 26 || 32 || 69 || 33 || n/a
|-
|| 1.1 M1(**) || n/a || n/a || 35 || 49 || 43 || n/a || 50 || 48 || 46 || 84 || 49 || n/a
|-
|| 1.0-M2 (*) || 1744 || 1744 || 1745 || 1750 || 1753 || 1753 || n/a || 1744 || 1755 || 1754 || n/a || n/a
|}
*: 1.0-M2 misses some link flags, and thus many unexpected link failures observed
**: 1.1 M1 has gcc upgrade from 4.5.1 to 4.6.1, which has two new options, -Wunused-but-set-variable and -Waddress enabled by default. They casused many cases failed. We need add -Wno-unused-but-set-variable and -Wno-address to fix the problems.
***: From 1.2, We using POSIX test suite in LTP test suite instead of POSIX test suite 1.5.2.
****: From 1.2 M2, We also test AIO.
general tips:
* use "-m 512" to launch the qemu targets
* make sure below line is uncommented in LDFLAGS file:
#-D_XOPEN_SOURCE=600 -lpthread -lrt -lm
* don't test AIO as the test cases themselves have compilation warnings which are treated as errors (use 'exit' while doesn't include stdlib.h)

==Result analysis==
Current results are base on Yocto 3.1 and POSIX test suite in LTP release 20200120.
After analysis every test case except PASS will be list here, whether a patch will be gave to fix it or put the case to blacklist with a explanation.

POSIX test results: https://wiki.yoctoproject.org/wiki/POSIX-results

==Test environment==
'''OpenPOSIX version''': posixtestsuite in LTP release 20200120

'''profile''': core-image-sato-sdk

'''run command''': cd /opt/ltp/testcases/open_posix_testsuite;
make generate-makefiles;
make conformance-all conformance-test;
make tools-all;
bin/run-posix-option-group-test.sh [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

==Current Milestone (Yocto 3.1 RC2 build)==

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 49 || n/a
|}

==Previous Milestone==

===Yocto 3.0 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 49 || 48
|}

===Yocto 2.7 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 49 || 48
|}

===Yocto 2.7 M3 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 49 || 48
|}

===Yocto 2.7 M2 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 50 || 49
|}

===Yocto 2.7 M1 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 51 || 48
|}

===Yocto 2.6 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 50 || 48
|}

===Yocto 2.6 M3 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 50 || 48
|}

===Yocto 2.6 M2 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 48 || 51 || 48
|}

===Yocto 2.6 M1 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || || 48
|}

===Yocto 2.5 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 45 || 48 || 47
|}

===Yocto 2.5 M3 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 44 || 47 || 45
|}

===Yocto 2.5 M2 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 44 || 47 || 45
|}

===Yocto 2.5 M1 RC3 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 45 || 47 || 45
|}

===Yocto 2.5 M1 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 45 || 47 || 45
|}

===Yocto 2.4 RC3 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 45 || 47 || 45
|}

===Yocto 2.4 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 45 || || 45
|}

===Yocto 2.4 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 45 || 47 || 45
|}

===Yocto 2.4 M2 RC3 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 45 || 46 || 45
|}

===Yocto 2.4 M2 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 45 || 46 || 45
|}

===Yocto 2.4 M1 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 45 || 45 || 46 || 45
|}

===Yocto 2.3 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 45 || 45 || 46 || 46
|}

===Yocto 2.3 M3 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 45 || 45 || 46 || 46
|}

===Yocto 2.3 M2 RC3 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 46 || 47 || 47
|}

===Yocto 2.3 M1 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 46 || 47 || 47
|}

===Yocto 2.2 RC4 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 46 || 47 || 47
|}

===Yocto 2.2 M3 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 46 || 47 || 47
|}

===Yocto 2.2 M2 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 46 || 48 || 47
|}

===Yocto 2.0 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 44 || 41 || 44 || 43
|}

===Yocto 2.0 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 44 || 42 || 44 || 43
|}

===Yocto 1.9 M3 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 44 || 41 || 44 || 43
|}

===Yocto 1.9 M2 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 44 || 47 || 47
|}

===Yocto 1.9 M1 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 44 || 47 || 46
|}

===Yocto 1.8 M4 RC2 20150403 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 44 || 48 || 46
|}

===Yocto 1.8 M3 RC3 20150303 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 44 || 47 || 47
|}

===Yocto 1.7 M4 RC5 20141018 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 45 || 47 || 47
|}

===Yocto 1.7 M4 RC4 20141011 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 45 || 49 || 47
|}

===Yocto 1.7 M2 RC1 20140730 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 48 || 48 || 50 || 49
|}

===Yocto 1.7 M1 RC1 20140625 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 48 || 48 || 52 || 50
|}

===Yocto 1.6 M5 RC4 20140411 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 45 || || 51 || 47
|}

===Yocto 1.6 M5 RC2 20140402 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 45 || || 51 || 47
|}

===Yocto 1.6 M5 RC1 20140326 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 45 || n/a || 47 || 45 || 46 || n/a
|}

===Yocto 1.6 M4 RC1 20140312 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 45 || n/a || 47 || 46 || 46 || n/a
|}

===Yocto 1.6 M3 RC2 20140218 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 45 || n/a || 47 || 45 || 49 || n/a
|}

===Yocto 1.6 M3 RC1 20140213 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || || n/a || 42 || 41 || 43 || n/a
|}

===Yocto 1.6 M2 RC1 20140114 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 41 || n/a || 42 || 41 || 43 || n/a
|}

===Yocto 1.6 M1 RC1 20131203 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 41 || n/a || 42 || n/a || 42 || n/a
|}

===Yocto 1.5.1 RC2 20131213 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || || n/a || 43 || 41 || 44 || n/a
|}

===Yocto 1.5 M5 RC6 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 41 || n/a || 43 || 41 || 44 || n/a
|}

===Yocto 1.5 M4 RC3 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 41 || n/a || 43 || n/a || 45 || n/a
|}

===Yocto 1.5 M4 RC2 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 41 || n/a || 44 || n/a || 43 || n/a
|}

===Yocto 1.5 M2 RC1 20130703 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 31 || n/a || 41 || n/a || n/a || n/a
|}

===Yocto 1.4.1 RC1 20130612 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 122 || n/a || 124 || 124 || 126 || n/a
|}

===Yocto 1.5 M1 RC1 20130604 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 119 || n/a || 120 || 119 || n/a || n/a
|}

===Yocto 1.3.2 20130516 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 122 || n/a || 124 || 123 || 124 || n/a
|}

===Yocto 1.4 M6 RC2 20130418 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 122 || n/a || 124 || 123 || 126 || n/a
|}

===Yocto 1.4 M5 RC3 20130403 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 122 || n/a || 124 || 123 || n/a || n/a
|}

===Yocto 1.4 M5 RC2 20130327 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || n/a || 124 || 123 || 124 ||
|}

===Yocto 1.4 M4 RC1 20130220 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || n/a || 124 || 124 || 126 || 122
|}

===Yocto 1.4 M3 RC2 20130131 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || n/a || 124 || 123 || 124 || 122
|}

===Yocto 1.4 M3 RC1 20130122 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || n/a || 124 || 123 || 124 || 122
|}

===Yocto 1.4 M1 RC1 20121128 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || n/a || 124 || 123 || 125 ||
|}

===Yocto 1.3 M5 RC4 20121010 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || 123 || 123 || 124 || 124 || 122
|}

===Yocto 1.3 M5 RC3 20121003 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || 122 || 124 || 127 || 124 || 122
|}

===Yocto 1.3 M5 RC2 20120926 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120614

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || 122 || 124 || 125 || 125 || 122
|}

===Yocto 1.3 M4 RC3 20120916 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120614

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || || 123 || 123 || 124 || 124 || 122
|}

===Yocto 1.3 M3 RC2 20120814 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120617

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || || || 123 || 124 || 122 || 123
|}

===Yocto 1.3 M2 20120802 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120617

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 124 || n/a || 123 || 125 || 123 || 123
|}

===Yocto 1.3 M2 RC1 20120712 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 126 || n/a || n/a || 126 || 128 || 127
|}

===Yocto 1.2.1 20120629 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 128 || 125 || 126 || 125 || 129 || 130
|}

===Yocto 1.2 Denzil meta-intel ===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''git info''':

Tree/Branch: poky/denzil

Commit: 7552ccd06c6327b5f36ee0cceb432946f8e98d3f

Meta-intel branch: denzil

Commit: a79035a584cd618d7202ce006cfb2d714a0ce717

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''huronriver'''
|-
|| failures || 126 || 126 || 129
|}

===Yocto 1.3 M1 RC1 20120613 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || '''huronriver'''
|-
|| failures || 125 || 125 || 126 || 126 || 129 || 127
|}

===Yocto 1.3 20120606 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 126 || 125 || 126 || 125 || 126
|}

===Yocto 1.2 Denzil RC5===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures ||128 || 125 || 126 || 126 || 129
|}

===Yocto 1.2 Denzil RC4 ===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 128 || 126 || 127 || 126 || 128
|}

===Yocto 1.2 M4 RC3===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 127 || 128 || 125 || n/a || 126
|}

===Yocto 1.2 M4 RC2===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 127 || 125 || 126 || 127 || 130
|}
===Yocto 1.2 M4 RC1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120104

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 129 || 126 || 126 || 127 || 130
|}
===Yocto 1.2 M3 RC1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120104

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 130 || 127 || 126 || 129 || 132
|}

===Yocto 1.1.1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 10 || 9 || 32 || 31 || 33
|}

===Yocto 1.2 M2 RC1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20110915

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 128 || 130 || 128 || 131 || 132
|}

===Yocto 1.2 M1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20110915

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 98 || 98 || 90 || 92 || 92 || 89 || 91 || 92
|}

===Yocto 1.0.2===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': poky-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || || || 35 || 32 || 33 || 34 || 30 || 71
|}

===Yocto 1.1 M4 RC4===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 25 || 25 || 31 || 33 || 32 || 32 || 30 || 31
|}

===Yocto 1.1 M4 RC3===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 24 || 23 || 32 || 35 || 33 || 31 || 37 || 33
|}

===Yocto 1.1 M4 RC2===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 25 || 24 || 31 || 34 || 34 || 32 || 31 || 33
|}

===Yocto 1.1 M3===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || || || 32 || 34 || 34 || 31 || 30 || 32
|}

===Yocto 1.1 M2===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 31 || 26 || 30 || 34 || 32 || 33 || 32 || 69
|}

===Yocto 1.1 M1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 50 || 48 || 35 || 49 || 43 || 49 || 46 || 84
|}

===Yocto 1.0 M2===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': poky-image-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''qemux86''' || '''qemu-x86_64''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''atom-pc''' || '''blacksand''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 1744 || 1744 || 1745 || 1750 || 1753 || 1753 || 1744 || 1755 || 1754
|}

The major problem for high failure numbers here is due to one environmental issue. It's suggested to uncomment below line from LDFLAGS file:
#-D_XOPEN_SOURCE=600 -lpthread -lrt -lm
libpthread and librt are critical for posix interface test. Without doing this the majority of the failures are link failures being failed to find necessary libraries.
My quick test on qemux86 shows that the failure could be reduced a lot to <200 in a rough run

Based on above fact, no more analysis is done on 1.0-M2 posix results. The thorough analysis will be postponed to 1.0-M3 which will use the right test steps and newer 2.6.37 kernel

Posix result

2020-04-10T01:24:41Z

Yzhao: /* Current Milestone (Yocto 3.1 RC2 build) */

==Introduction==
The Open POSIX* Test Suite is an open source test suite with the goal of performing conformance, functional, stress, and performance testing of the functions described in the IEEE Std 1003.1-2001 System Interfaces specification. Eventual testing of the full specification is desired (http://posixtest.sourceforge.net/)

Similar to [[https://wiki.yoctoproject.org/wiki/LTP_result LTP result]], embedded linux distribution is highly customized for a specific purpose, and thus both the kernel and base environment may not satisfy the posix requirement. So the major purposes of this work are:
* to understand the reasons for existing posix failures. If the cause is from a specific package itself, go to fix it. Or else if the error simply come from the fact that a given package doesn't exist in current profile, add the explanation here
* to track poix test results cross Yocto releases, and ensure a declining error number for same profile
* to be the reference if Yocto users want to get a base picture

There is one bugzilla entry related:
http://bugzilla.pokylinux.org/show_bug.cgi?id=172

==Overall trend==

Overall trend tends to track the change of posix test results along with Yocto's progress.

In below table we list total POSIX failures for each architectures in each milestone: (now this wiki doesn't allow upload files. So for detail logs please refer to earlier bug link)

{|border="1"
|| '''Milestone''' || '''qemux86''' || '''qemu-x86_64''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''atom-pc''' || '''sugarbay''' || '''blacksand''' || '''beagleboard''' || '''routerstation''' || '''mpc8315e-rdb''' || ''' huronriver''' || '''edgerouter''' || '''beaglebone''' || '''genericx86-64'''
|-
|| 3.1 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 ||
|-
|| 3.0 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 49 || 47 ||
|-
|| 2.7 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 49 || 47 ||
|-
|| 2.7 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 49 || 47 ||
|-
|| 2.7 M2 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 49 || n/a || 50 || 47 ||
|-
|| 2.7 M1 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 51 || 47 ||
|-
|| 2.6 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 50 || 47 ||
|-
|| 2.6 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 50 || 47 ||
|-
|| 2.6 M2 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || 51 || 48 ||
|-
|| 2.6 M1 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 48 || n/a || n/a || 47 ||
|-
|| 2.5 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 48 || 45 ||
|-
|| 2.5 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 44 ||
|-
|| 2.5 M2 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 44 ||
|-
|| 2.5 M1 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 45 || 47
|-
|| 2.5 M1 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 45 ||
|-
|| 2.4 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 45 || 46
|-
|| 2.4 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || || 45 || 46
|-
|| 2.4 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 47 || 45 || 46
|-
|| 2.4 M2 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 46 || 45 || 46
|-
|| 2.4 M2 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 46 || 45 || 46
|-
|| 2.4 M1 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 46 || 45 || 45
|-
|| 2.3 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 46 || n/a || 46 || 45 || 45
|-
|| 2.3 M3 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 46 || n/a || 46 || 45 || 45
|-
|| 2.3 M2 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 46 || 46
|-
|| 2.3 M1 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 46 || 46
|-
|| 2.2 RC4 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 46 || 46
|-
|| 2.2 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 46 || 46
|-
|| 2.2 M2 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 48 || 46 || 46
|-
|| 2.0 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 43 || n/a || 44 || 41 || 44
|-
|| 2.0 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 43 || n/a || 44 || 42 || 44
|-
|| 1.9 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 43 || n/a || 44 || 41 || 44
|-
|| 1.9 M2 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 44 || 47
|-
|| 1.9 M1 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 46 || n/a || 47 || 44 || 47
|-
|| 1.8 M4 RC2 20150403 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 46 || n/a || 48 || 44 || 47
|-
|| 1.8 M3 RC3 20150303 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 44 || 47
|-
|| 1.7 M4 RC5 20141018 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 47 || 45 || 47
|-
|| 1.7 M4 RC4 20141011 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 49 || 45 || 47
|-
|| 1.7 M2 RC1 20140730 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 49 || n/a || 50 || 48 || 48
|-
|| 1.7 M1 RC1 20140625 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 50 || n/a || 52 || 48 || 48
|-
|| 1.5.2 RC3 20140428 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 41 || 44 || 43 || n/a || n/a || n/a || 41
|-
|| 1.6 M5 RC4 20140411 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 51 || || 45
|-
|| 1.6 M5 RC2 20140402 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 47 || n/a || 51 || || 45
|-
|| 1.6 M5 RC1 20140326 || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 45 || 46 || 47 || n/a
|-
|| 1.6 M4 RC1 20140312 || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 46 || 46 || 47 || n/a
|-
|| 1.6 M3 RC2 20140218 || n/a || n/a || n/a || n/a || n/a || n/a || 45 || n/a || 45 || 49 || 47 || n/a
|-
|| 1.6 M3 RC1 20140213 || n/a || n/a || n/a || n/a || n/a || n/a || || n/a || 41 || 43 || 42 || n/a
|-
|| 1.6 M2 RC1 20140114 || n/a || n/a || n/a || n/a || n/a || n/a || 41 || n/a || 41 || 43 || 42 || n/a
|-
|| 1.5.1 RC2 20131213 || n/a || n/a || n/a || n/a || n/a || n/a || || n/a || 41 || 44 || 43 || n/a
|-
|| 1.6 M1 RC1 20131203 || n/a || n/a || n/a || n/a || n/a || n/a || 41 || n/a || n/a || 42 || 42 || n/a
|-
|| 1.5 M5 RC6 || n/a || n/a || n/a || n/a || n/a || n/a || 41 || n/a || 41 || 44 || 43 || n/a
|-
|| 1.5 M4 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || 41 || n/a || n/a || 45 || 43 || n/a
|-
|| 1.5 M4 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || 41 || n/a || n/a || 43 || 44 || n/a
|-
|| 1.5 M2 RC1 20130703 || n/a || n/a || n/a || n/a || n/a || n/a || 31 || n/a || n/a || n/a || 41 || n/a
|-
|| 1.4.1 RC1 20130612 || n/a || n/a || n/a || n/a || n/a || n/a || 122 || n/a || 124 || 126 || 124 || n/a
|-
|| 1.5 M1 RC1 20130604 || n/a || n/a || n/a || n/a || n/a || n/a || 119 || n/a || 119 || n/a || 120 || n/a
|-
|| 1.3.2 20130516 || n/a || n/a || n/a || n/a || n/a || n/a || 122 || n/a || 123 || 124 || 124 || n/a
|-
|| 1.4 M6 RC2 20130418 || n/a || n/a || n/a || n/a || n/a || n/a || 122 || n/a || 123 || 126 || 124 || n/a
|-
|| 1.4 M5 RC3 20130403 || n/a || n/a || n/a || n/a || n/a || n/a || 122 || n/a || 123 || n/a || 124 || n/a
|-
|| 1.4 M5 RC2 20130327 || n/a || n/a || n/a || n/a || n/a || n/a || 122 || n/a || 123 || 124 || 124 || n/a
|-
|| 1.4 M5 RC2 20130327 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 124 || 124 ||
|-
|| 1.4 M4 RC1 20130220 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 124 || 126 || 124 || 122
|-
|| 1.4 M3 RC2 20130131 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 124 || 124 || 122
|-
|| 1.4 M3 RC1 20130122 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 124 || 124 || 122
|-
|| 1.2.2 20130105 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 128 || 130 || 127 ||
|-
|| 1.2.2 20121206 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 127 || 129 || 126 || 128
|-
|| 1.4 M1 RC1 20121128 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 125 || 124 ||
|-
|| 1.2.2 20121018 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 124 || 126 || 124 || 122
|-
|| 1.3 M5 RC4 20121010 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 123 || 124 || 124 || 122
|-
|| 1.3 M5 RC3 20121003 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 122 || 124 || 127 || 124 || 122
|-
|| 1.3 M5 RC2 20120926 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 122 || 125 || 125 || 124 || 122
|-
|| 1.3 M4 RC3 20120916 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 123 || 124 || 124 || 123 || 122
|-
|| 1.3 M3 RC2 20120814 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 124 || 122 || 123 || 123
|-
|| 1.3 M2 20120802 || n/a || n/a || n/a || n/a || n/a || n/a || 124 || n/a || 125 || 123 || 123 || 123
|-
|| 1.3 M2 RC1 20120712 || n/a || n/a || n/a || n/a || n/a || n/a || 126 || n/a || 126 || 128 || n/a || 127
|-
|| 1.1.2 20120630 || n/a || n/a || n/a || n/a || n/a || n/a || 128 || n/a || 162 || 167 || 126 || n/a
|-
|| 1.2.1 20120629 || n/a || n/a || n/a || n/a || n/a || n/a || 128 || 125 || 125 || 129 || 126 || 130
|-
|| 1.2 denzil meta-intel || n/a || n/a || n/a || n/a || n/a || n/a || 126 || 126 || n/a || n/a || n/a || 129
|-
|| 1.3 M1 RC1 20120613 || n/a || n/a || n/a || n/a || n/a || n/a || 125 || 125 || 126 || 129 || 126 || 127
|-
|| 1.3 20120606 build || n/a || n/a || n/a || n/a || n/a || n/a || 126 || 125 || 125 || 126 || 126 || n/a
|-
|| Denzil 1.2 RC5 || n/a || n/a || n/a || n/a || n/a || n/a || 128 || 125 || 126 || 129 || 126 || n/a
|-
|| Denzil 1.2 RC4 || n/a || n/a || n/a || n/a || n/a || n/a || 128 || 126 || 126 || 128 || 127 || n/a
|-
|| 1.2 M4 RC3 || n/a || n/a || n/a || n/a || n/a || n/a || 127 || 128 || 125 || n/a || 126 || n/a
|-
|| 1.2 M4 RC2 || n/a || n/a || n/a || n/a || n/a || n/a || 127 || 125 || 127 || 130 || 126 || n/a
|-
|| 1.2 M4 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || 129 || 126 || 127 || 130 || 126 || n/a
|-
|| 1.2 M3 RC1 || n/a || n/a || n/a || n/a || n/a || n/a || 130 || 127 || 129 || 132 || 126 || n/a
|-
|| 1.1.1 || n/a || n/a || n/a || n/a || n/a || n/a || 10 || 9 || 31 || 33 || 32 || n/a
|-
|| 1.2 M2 RC1(****) || n/a || n/a || n/a || n/a || n/a || n/a || 130 || 128 || 131 || 132 || 128 || n/a
|-
|| 1.2 M1 RC2(***) || n/a || n/a || 90 || 92 || 92 || n/a || 98 || 98 || 91 || 92 || 89 || n/a
|-
|| 1.0.2 || n/a || n/a || 35 || 32 || 33 || n/a || || || 30 || 71 || 34 || n/a
|-
|| 1.1 M4 RC4 || n/a || n/a || 31 || 33 || 32 || n/a || 25 || 25 || 30 || 31 || 32 || n/a
|-
|| 1.1 M4 RC3 || n/a || n/a || 32 || 35 || 33 || n/a || 24 || 23 || 37 || 33 || 31 || n/a
|-
|| 1.1 M4 RC2 || n/a || n/a || 31 || 34 || 34 || n/a || 25 || 24 || 31 || 33 || 32 || n/a
|-
|| 1.1 M3 || n/a || n/a || 32 || 34 || 34 || n/a || 23 || 24 || 30 || 32 || 31 || n/a
|-
|| 1.1 M2 || n/a || n/a || 30 || 34 || 32 || n/a || 31 || 26 || 32 || 69 || 33 || n/a
|-
|| 1.1 M1(**) || n/a || n/a || 35 || 49 || 43 || n/a || 50 || 48 || 46 || 84 || 49 || n/a
|-
|| 1.0-M2 (*) || 1744 || 1744 || 1745 || 1750 || 1753 || 1753 || n/a || 1744 || 1755 || 1754 || n/a || n/a
|}
*: 1.0-M2 misses some link flags, and thus many unexpected link failures observed
**: 1.1 M1 has gcc upgrade from 4.5.1 to 4.6.1, which has two new options, -Wunused-but-set-variable and -Waddress enabled by default. They casused many cases failed. We need add -Wno-unused-but-set-variable and -Wno-address to fix the problems.
***: From 1.2, We using POSIX test suite in LTP test suite instead of POSIX test suite 1.5.2.
****: From 1.2 M2, We also test AIO.
general tips:
* use "-m 512" to launch the qemu targets
* make sure below line is uncommented in LDFLAGS file:
#-D_XOPEN_SOURCE=600 -lpthread -lrt -lm
* don't test AIO as the test cases themselves have compilation warnings which are treated as errors (use 'exit' while doesn't include stdlib.h)

==Result analysis==
Current results are base on Yocto 3.1 and POSIX test suite in LTP release 20200120.
After analysis every test case except PASS will be list here, whether a patch will be gave to fix it or put the case to blacklist with a explanation.

POSIX test results: https://wiki.yoctoproject.org/wiki/POSIX-results

==Test environment==
'''OpenPOSIX version''': posixtestsuite in LTP release 20200120

'''profile''': core-image-sato-sdk

'''run command''': cd /opt/ltp/testcases/open_posix_testsuite;
make generate-makefiles;
make conformance-all conformance-test;
make tools-all;
bin/run-posix-option-group-test.sh [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

==Current Milestone (Yocto 3.1 RC2 build)==

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 49 || n/a
|}

==Previous Milestone==

===Yocto 3.0 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 49 || 48
|}

===Yocto 2.7 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 49 || 48
|}

===Yocto 2.7 M3 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 49 || 48
|}

===Yocto 2.7 M2 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 50 || 49
|}

===Yocto 2.7 M1 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 51 || 48
|}

===Yocto 2.6 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 50 || 48
|}

===Yocto 2.6 M3 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || 50 || 48
|}

===Yocto 2.6 M2 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 48 || 51 || 48
|}

===Yocto 2.6 M1 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 47 || || 48
|}

===Yocto 2.5 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 45 || 48 || 47
|}

===Yocto 2.5 M3 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 44 || 47 || 45
|}

===Yocto 2.5 M2 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 44 || 47 || 45
|}

===Yocto 2.5 M1 RC3 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 45 || 47 || 45
|}

===Yocto 2.5 M1 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || || 45 || 47 || 45
|}

===Yocto 2.4 RC3 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 45 || 47 || 45
|}

===Yocto 2.4 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 45 || || 45
|}

===Yocto 2.4 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 45 || 47 || 45
|}

===Yocto 2.4 M2 RC3 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 45 || 46 || 45
|}

===Yocto 2.4 M2 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 45 || 46 || 45
|}

===Yocto 2.4 M1 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 45 || 45 || 46 || 45
|}

===Yocto 2.3 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 45 || 45 || 46 || 46
|}

===Yocto 2.3 M3 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 45 || 45 || 46 || 46
|}

===Yocto 2.3 M2 RC3 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 46 || 47 || 47
|}

===Yocto 2.3 M1 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 46 || 47 || 47
|}

===Yocto 2.2 RC4 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 46 || 47 || 47
|}

===Yocto 2.2 M3 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 46 || 47 || 47
|}

===Yocto 2.2 M2 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 46 || 46 || 48 || 47
|}

===Yocto 2.0 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 44 || 41 || 44 || 43
|}

===Yocto 2.0 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 44 || 42 || 44 || 43
|}

===Yocto 1.9 M3 RC1 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 44 || 41 || 44 || 43
|}

===Yocto 1.9 M2 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 44 || 47 || 47
|}

===Yocto 1.9 M1 RC2 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 44 || 47 || 46
|}

===Yocto 1.8 M4 RC2 20150403 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 44 || 48 || 46
|}

===Yocto 1.8 M3 RC3 20150303 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 44 || 47 || 47
|}

===Yocto 1.7 M4 RC5 20141018 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 45 || 47 || 47
|}

===Yocto 1.7 M4 RC4 20141011 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 47 || 45 || 49 || 47
|}

===Yocto 1.7 M2 RC1 20140730 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 48 || 48 || 50 || 49
|}

===Yocto 1.7 M1 RC1 20140625 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 48 || 48 || 52 || 50
|}

===Yocto 1.6 M5 RC4 20140411 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 45 || || 51 || 47
|}

===Yocto 1.6 M5 RC2 20140402 build===

{|border="1"
|| '''Status''' || '''genericx86-64''' || '''beaglebone''' || '''edgerouter''' || '''mpc8315e-rdb'''
|-
|| failures || 45 || || 51 || 47
|}

===Yocto 1.6 M5 RC1 20140326 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 45 || n/a || 47 || 45 || 46 || n/a
|}

===Yocto 1.6 M4 RC1 20140312 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 45 || n/a || 47 || 46 || 46 || n/a
|}

===Yocto 1.6 M3 RC2 20140218 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 45 || n/a || 47 || 45 || 49 || n/a
|}

===Yocto 1.6 M3 RC1 20140213 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || || n/a || 42 || 41 || 43 || n/a
|}

===Yocto 1.6 M2 RC1 20140114 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 41 || n/a || 42 || 41 || 43 || n/a
|}

===Yocto 1.6 M1 RC1 20131203 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 41 || n/a || 42 || n/a || 42 || n/a
|}

===Yocto 1.5.1 RC2 20131213 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || || n/a || 43 || 41 || 44 || n/a
|}

===Yocto 1.5 M5 RC6 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 41 || n/a || 43 || 41 || 44 || n/a
|}

===Yocto 1.5 M4 RC3 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 41 || n/a || 43 || n/a || 45 || n/a
|}

===Yocto 1.5 M4 RC2 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 41 || n/a || 44 || n/a || 43 || n/a
|}

===Yocto 1.5 M2 RC1 20130703 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 31 || n/a || 41 || n/a || n/a || n/a
|}

===Yocto 1.4.1 RC1 20130612 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 122 || n/a || 124 || 124 || 126 || n/a
|}

===Yocto 1.5 M1 RC1 20130604 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 119 || n/a || 120 || 119 || n/a || n/a
|}

===Yocto 1.3.2 20130516 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 122 || n/a || 124 || 123 || 124 || n/a
|}

===Yocto 1.4 M6 RC2 20130418 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 122 || n/a || 124 || 123 || 126 || n/a
|}

===Yocto 1.4 M5 RC3 20130403 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 122 || n/a || 124 || 123 || n/a || n/a
|}

===Yocto 1.4 M5 RC2 20130327 build===

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || n/a || 124 || 123 || 124 ||
|}

===Yocto 1.4 M4 RC1 20130220 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || n/a || 124 || 124 || 126 || 122
|}

===Yocto 1.4 M3 RC2 20130131 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || n/a || 124 || 123 || 124 || 122
|}

===Yocto 1.4 M3 RC1 20130122 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || n/a || 124 || 123 || 124 || 122
|}

===Yocto 1.4 M1 RC1 20121128 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || n/a || 124 || 123 || 125 ||
|}

===Yocto 1.3 M5 RC4 20121010 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || 123 || 123 || 124 || 124 || 122
|}

===Yocto 1.3 M5 RC3 20121003 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120903

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || 122 || 124 || 127 || 124 || 122
|}

===Yocto 1.3 M5 RC2 20120926 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120614

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || n/a || 122 || 124 || 125 || 125 || 122
|}

===Yocto 1.3 M4 RC3 20120916 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120614

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || || 123 || 123 || 124 || 124 || 122
|}

===Yocto 1.3 M3 RC2 20120814 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120617

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || || || 123 || 124 || 122 || 123
|}

===Yocto 1.3 M2 20120802 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120617

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 124 || n/a || 123 || 125 || 123 || 123
|}

===Yocto 1.3 M2 RC1 20120712 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''
{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 126 || n/a || n/a || 126 || 128 || 127
|}

===Yocto 1.2.1 20120629 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || ''' huronriver'''
|-
|| failures || 128 || 125 || 126 || 125 || 129 || 130
|}

===Yocto 1.2 Denzil meta-intel ===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''git info''':

Tree/Branch: poky/denzil

Commit: 7552ccd06c6327b5f36ee0cceb432946f8e98d3f

Meta-intel branch: denzil

Commit: a79035a584cd618d7202ce006cfb2d714a0ce717

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''huronriver'''
|-
|| failures || 126 || 126 || 129
|}

===Yocto 1.3 M1 RC1 20120613 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation''' || '''huronriver'''
|-
|| failures || 125 || 125 || 126 || 126 || 129 || 127
|}

===Yocto 1.3 20120606 build===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 126 || 125 || 126 || 125 || 126
|}

===Yocto 1.2 Denzil RC5===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures ||128 || 125 || 126 || 126 || 129
|}

===Yocto 1.2 Denzil RC4 ===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 128 || 126 || 127 || 126 || 128
|}

===Yocto 1.2 M4 RC3===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 127 || 128 || 125 || n/a || 126
|}

===Yocto 1.2 M4 RC2===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120401

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 127 || 125 || 126 || 127 || 130
|}
===Yocto 1.2 M4 RC1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120104

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 129 || 126 || 126 || 127 || 130
|}
===Yocto 1.2 M3 RC1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20120104

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 130 || 127 || 126 || 129 || 132
|}

===Yocto 1.1.1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 10 || 9 || 32 || 31 || 33
|}

===Yocto 1.2 M2 RC1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20110915

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 128 || 130 || 128 || 131 || 132
|}

===Yocto 1.2 M1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite in LTP release 20110915

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 98 || 98 || 90 || 92 || 92 || 89 || 91 || 92
|}

===Yocto 1.0.2===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': poky-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || || || 35 || 32 || 33 || 34 || 30 || 71
|}

===Yocto 1.1 M4 RC4===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 25 || 25 || 31 || 33 || 32 || 32 || 30 || 31
|}

===Yocto 1.1 M4 RC3===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 24 || 23 || 32 || 35 || 33 || 31 || 37 || 33
|}

===Yocto 1.1 M4 RC2===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 25 || 24 || 31 || 34 || 34 || 32 || 31 || 33
|}

===Yocto 1.1 M3===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || || || 32 || 34 || 34 || 31 || 30 || 32
|}

===Yocto 1.1 M2===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 31 || 26 || 30 || 34 || 32 || 33 || 32 || 69
|}

===Yocto 1.1 M1===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': core-image-sato-sdk

'''run command''': ./run_tests [MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''sugarbay''' || '''blacksand''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''mpc8315e-rdb''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 50 || 48 || 35 || 49 || 43 || 49 || 46 || 84
|}

===Yocto 1.0 M2===
'''environment'''
'''OpenPOSIX version''': posixtestsuite-1.5.2.tar

'''profile''': poky-image-sdk

'''run command''': ./run_tests [AIO|MEM|MSG|SEM|SIG|THR|TMR|TPS]

'''result'''

{|border="1"
|| '''Status''' || '''qemux86''' || '''qemu-x86_64''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''atom-pc''' || '''blacksand''' || '''beagleboard''' || '''routerstation'''
|-
|| failures || 1744 || 1744 || 1745 || 1750 || 1753 || 1753 || 1744 || 1755 || 1754
|}

The major problem for high failure numbers here is due to one environmental issue. It's suggested to uncomment below line from LDFLAGS file:
#-D_XOPEN_SOURCE=600 -lpthread -lrt -lm
libpthread and librt are critical for posix interface test. Without doing this the majority of the failures are link failures being failed to find necessary libraries.
My quick test on qemux86 shows that the failure could be reduced a lot to <200 in a rough run

Based on above fact, no more analysis is done on 1.0-M2 posix results. The thorough analysis will be postponed to 1.0-M3 which will use the right test steps and newer 2.6.37 kernel

Edgerouter-ltp

2020-04-10T01:22:28Z

Yzhao: /* 3.0 RC2 build */

==3.1 RC2 build==
'''total: 20'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| msgstress03 || NAB || msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)|| May be OK if under stress ||
|-
|| open12 || || open12 4 TBROK : open12.c:244: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| openat02 || || openat02 3 TBROK : openat02.c:204: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| renameat201 || || renameat201 2 TFAIL : renameat201.c:154: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:133: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| settimeofday01 || || TBROK : tst_sig.c:232: unexpected signal SIGSEGV(11) received (pid = 30394). || ||
|-
|| settimeofday02 || || TBROK : tst_sig.c:232: unexpected signal SIGSEGV(11) received (pid = 30395).e || ||
|-
|| truncate03 || || TBROK : tst_tmpdir.c:263: tst_tmpdir: mkdtemp(/opt/tmp/ltp-ZYZdK7Jn9M/truffN7GM) failed: errno=ENOSPC(28): Nospace left on device || ||
|-
|| truncate03_64 || || TBROK : tst_tmpdir.c:263: tst_tmpdir: mkdtemp(/opt/tmp/ltp-ZYZdK7Jn9M/truQVm43P) failed: errno=ENOSPC(28): Nospace left on device || ||
|-
|| utime01 || || utime01 1 TFAIL : utime01.c:163: tmp_file access and modification times not set || ||
|-
|| utime02 || || utime02 1 TFAIL : utime02.c:169: tmp_file access and modification times not set || ||
|-
|| utime05 || || utime05 1 TBROK : tst_tmpdir.c:263: tst_tmpdir: mkdtemp(/opt/tmp/ltp-ZYZdK7Jn9M/utiu8ckQ3) failed: errno=ENOSPC(28): No space left on device
|| ||
|-
|| utime06 || || utime06 3 TFAIL : utime06.c:151: utime failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| utimes01 || || utimes01 6 TFAIL : utimes01.c:178: utimes() failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| dio04 || || diotest4 3 TFAIL : diotest4.c:268: can't write to file -1 || ||
|-
|| dio10 || || diotest4 3 TFAIL : diotest4.c:268: can't write to file -1 || ||
|-
|| mtest06 || || mmap1.c:204: BROK: mmap((nil),2147483648,3,2050,-1,0) failed: ENOMEM (12) || ||
|-
|| ar_sh || || TFAIL: ar haven't updated modified file0 (-u) || ||
|-
|| unshare01_sh || NAB || unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
|-
|}

==3.0 RC2 build==
'''total: 19'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| msgstress03 || NAB || msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)|| May be OK if under stress ||
|-
|| open12 || || open12 4 TBROK : open12.c:244: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| openat02 || || openat02 3 TBROK : openat02.c:204: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| renameat201 || || renameat201 2 TFAIL : renameat201.c:154: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:133: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| sendfile09 || || sendfile09 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| sendfile09_64 || || sendfile09_64 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| utime01 || || utime01 1 TFAIL : utime01.c:163: tmp_file access and modification times not set || ||
|-
|| utime02 || || utime02 1 TFAIL : utime02.c:169: tmp_file access and modification times not set || ||
|-
|| utime06 || || utime06 3 TFAIL : utime06.c:151: utime failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| utimes01 || || utimes01 6 TFAIL : utimes01.c:178: utimes() failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| overcommit_memory01 || || vercommit_memory.c:213: FAIL: alloc passed, expected to fail || ||
|-
|| overcommit_memory04 || || vercommit_memory.c:213: FAIL: alloc passed, expected to fail || ||
|-
|| overcommit_memory05 || || vercommit_memory.c:213: FAIL: alloc passed, expected to fail || ||
|-
|| overcommit_memory06 || || vercommit_memory.c:213: FAIL: alloc passed, expected to fail || ||
|-
|| ar_sh || || TFAIL: ar haven't updated modified file0 (-u) || ||
|-
|| unshare01_sh || NAB || unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
|-
|}

==2.7 RC2 build==
'''total: 16'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| msgstress03 || NAB || msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)|| May be OK if under stress ||
|-
|| open12 || || open12 4 TBROK : open12.c:244: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| openat02 || || openat02 3 TBROK : openat02.c:204: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| renameat201 || || renameat201 2 TFAIL : renameat201.c:154: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:133: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| sendfile09 || || sendfile09 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| sendfile09_64 || || sendfile09_64 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| utime01 || || utime01 1 TFAIL : utime01.c:163: tmp_file access and modification times not set || ||
|-
|| utime02 || || utime02 1 TFAIL : utime02.c:169: tmp_file access and modification times not set || ||
|-
|| utime06 || || utime06 3 TFAIL : utime06.c:151: utime failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| utimes01 || || utimes01 6 TFAIL : utimes01.c:178: utimes() failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| ar_sh || || TFAIL: ar haven't updated modified file0 (-u) || ||
|-
|| file01_sh || LTP || file01 10 TFAIL: in: was not recognized
|| Need to update the case since the file command had been upgraded. ||
|-
|| unshare01_sh || NAB || unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
|-
|}

==2.7 M3 RC1 build==
'''total: 16'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| msgstress03 || NAB || msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)|| May be OK if under stress ||
|-
|| open12 || || open12 4 TBROK : open12.c:244: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| openat02 || || openat02 3 TBROK : openat02.c:204: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| renameat201 || || renameat201 2 TFAIL : renameat201.c:154: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:133: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| sendfile09 || || sendfile09 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| sendfile09_64 || || sendfile09_64 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| utime01 || || utime01 1 TFAIL : utime01.c:163: tmp_file access and modification times not set || ||
|-
|| utime02 || || utime02 1 TFAIL : utime02.c:169: tmp_file access and modification times not set || ||
|-
|| utime06 || || utime06 3 TFAIL : utime06.c:151: utime failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| utimes01 || || utimes01 6 TFAIL : utimes01.c:178: utimes() failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| ar_sh || || TFAIL: ar haven't updated modified file0 (-u) || ||
|-
|| file01_sh || LTP || file01 10 TFAIL: in: was not recognized
|| Need to update the case since the file command had been upgraded. ||
|-
|| unshare01_sh || NAB || unshare01 6 TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
|-
|}

==2.7 M2 RC1 build==
'''total: 18'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| msgstress03 || NAB || msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)|| May be OK if under stress ||
|-
|| open12 || || open12 4 TBROK : open12.c:244: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| openat02 || || openat02 3 TBROK : openat02.c:204: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| renameat201 || || renameat201 2 TFAIL : renameat201.c:154: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:133: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| sendfile09 || || sendfile09 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| sendfile09_64 || || sendfile09_64 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| utime01 || || utime01 1 TFAIL : utime01.c:163: tmp_file access and modification times not set || ||
|-
|| utime02 || || utime02 1 TFAIL : utime02.c:169: tmp_file access and modification times not set || ||
|-
|| utime06 || || utime06 3 TFAIL : utime06.c:151: utime failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| utimes01 || || utimes01 6 TFAIL : utimes01.c:178: utimes() failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| overcommit_memory02 || NAB || overcommit_memory.c:235: BROK: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| ar01 || || TFAIL: ar haven't updated modified file0 (-u) || ||
|-
|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
|-
|}

==2.7 M1 RC1 build==
'''total: 18'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| msgstress03 || NAB || msgstress03 1 TFAIL : msgstress03.c:157: Fork failed (may be OK if under stress)|| May be OK if under stress ||
|-
|| open12 || || open12 4 TBROK : open12.c:244: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| openat02 || || openat02 3 TBROK : openat02.c:204: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| renameat201 || || renameat201 2 TFAIL : renameat201.c:154: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:133: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| sendfile09 || || sendfile09 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| sendfile09_64 || || sendfile09_64 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| utime01 || || utime01 1 TFAIL : utime01.c:163: tmp_file access and modification times not set || ||
|-
|| utime02 || || utime02 1 TFAIL : utime02.c:169: tmp_file access and modification times not set || ||
|-
|| utime06 || || utime06 3 TFAIL : utime06.c:151: utime failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| utimes01 || || utimes01 6 TFAIL : utimes01.c:178: utimes() failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| overcommit_memory02 || NAB || overcommit_memory.c:235: BROK: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| ar01 || || TFAIL: ar haven't updated modified file0 (-u) || ||
|-
|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
|-
|}

==2.6 RC1 build==
'''total: 19'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| msgctl10 || NAB || msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| open12 || || open12 4 TBROK : open12.c:244: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| openat02 || || openat02 3 TBROK : openat02.c:204: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| renameat201 || || renameat201 2 TFAIL : renameat201.c:154: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:133: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| sendfile09 || || sendfile09 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| sendfile09_64 || || sendfile09_64 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| utime01 || || utime01 1 TFAIL : utime01.c:163: tmp_file access and modification times not set || ||
|-
|| utime02 || || utime02 1 TFAIL : utime02.c:169: tmp_file access and modification times not set || ||
|-
|| utime06 || || utime06 3 TFAIL : utime06.c:151: utime failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| utimes01 || || utimes01 6 TFAIL : utimes01.c:178: utimes() failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| overcommit_memory02 || NAB || overcommit_memory.c:235: BROK: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| ar01 || || TFAIL: ar haven't updated modified file0 (-u) || ||
|-
|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
|-
|}

==2.6 M3 RC1 build==
'''total: 21'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| msgctl10 || NAB || msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| open12 || || open12 4 TBROK : open12.c:244: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| openat02 || || openat02 3 TBROK : openat02.c:204: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| renameat201 || || renameat201 2 TFAIL : renameat201.c:154: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:133: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| sendfile09 || || sendfile09 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| sendfile09_64 || || sendfile09_64 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| sigwaitinfo01 || LTP || sigwaitinfo01 7 TFAIL : sigwaitinfo01.c:386: Unrecognised child exit code || LTP fixed in commit 4926a47b538060e07bf7a7d36dec5a0c07b7ce9b ||
|-
|| utime01 || || utime01 1 TFAIL : utime01.c:163: tmp_file access and modification times not set || ||
|-
|| utime02 || || utime02 1 TFAIL : utime02.c:169: tmp_file access and modification times not set || ||
|-
|| utime06 || || utime06 3 TFAIL : utime06.c:151: utime failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| utimes01 || || utimes01 6 TFAIL : utimes01.c:178: utimes() failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| overcommit_memory02 || NAB || overcommit_memory.c:235: BROK: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| ar01 || || TFAIL: ar haven't updated modified file0 (-u) || ||
|-
|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
|-
|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
||
|-
|}

==2.6 M2 RC1 build==
'''total: 23'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On mip64 arch, the kernel returns EINVAL. ||
|-
|| msgctl10 || NAB || msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| open12 || || open12 4 TBROK : open12.c:244: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| openat02 || || openat02 3 TBROK : openat02.c:204: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| renameat201 || || renameat201 2 TFAIL : renameat201.c:154: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:133: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| sendfile09 || || sendfile09 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| sendfile09_64 || || sendfile09_64 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| utime01 || || utime01 1 TFAIL : utime01.c:163: tmp_file access and modification times not set || ||
|-
|| utime02 || || utime02 1 TFAIL : utime02.c:169: tmp_file access and modification times not set || ||
|-
|| utime06 || || utime06 3 TFAIL : utime06.c:151: utime failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| utimes01 || || utimes01 6 TFAIL : utimes01.c:178: utimes() failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| ftest06 || || || ||
|-
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| overcommit_memory02 || NAB || overcommit_memory.c:235: BROK: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || NAB || overcommit_memory.c:235: BROK: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| ar01 || || TFAIL: ar haven't updated modified file0 (-u) || ||
|-
|| ld01 || NAB || ld01 3 TFAIL: Failed to build shared library || file command bug. The commit 6876ebadcdf27224b3ffa9dfa4343127aa97c9b2 in file 5.33 introduced this regression bug. ||
|-
|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
||
|-
|}

==2.5 RC1 build==
'''total: 25'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On mip64 arch, the kernel returns EINVAL. ||
|-
|| msgctl10 || NAB || msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| open12 || || open12 4 TBROK : open12.c:244: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| openat02 || || openat02 3 TBROK : openat02.c:204: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| remap_file_pages01 || || || ||
|-
|| renameat201 || || renameat201 2 TFAIL : renameat201.c:154: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:133: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| sendfile09 || || sendfile09 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| sendfile09_64 || || sendfile09_64 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| utime01 || || utime01 1 TFAIL : utime01.c:163: tmp_file access and modification times not set || ||
|-
|| utime02 || || utime02 1 TFAIL : utime02.c:169: tmp_file access and modification times not set || ||
|-
|| utime06 || || utime06 3 TFAIL : utime06.c:151: utime failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| utimes01 || || utimes01 6 TFAIL : utimes01.c:178: utimes() failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| ftest06 || || || ||
|-
|| ksm03 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| ksm03_1 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| overcommit_memory02 || NAB || overcommit_memory.c:235: BROK: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || NAB || overcommit_memory.c:235: BROK: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| ar01 || || TFAIL: ar haven't updated modified file0 (-u) || ||
|-
|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
||
|-
|}

==2.5 M3 RC1 build==
'''total: 26'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| keyctl06 || NAB || keyctl06.c:68: FAIL: KEYCTL_READ returned 4 but expected 8 || This case is for regression test for kernel commits e645016abc80 and 3239b6f29bdf which were introduced by kernel 4.14. It would fail on 4.12 kernel. ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On mip64 arch, the kernel returns EINVAL. ||
|-
|| msgctl10 || NAB || msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| open12 || || open12 4 TBROK : open12.c:244: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| openat02 || || openat02 3 TBROK : openat02.c:204: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| remap_file_pages01 || || || ||
|-
|| renameat201 || || renameat201 2 TFAIL : renameat201.c:154: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:133: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| sendfile09 || || sendfile09 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| sendfile09_64 || || sendfile09_64 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| utime01 || || utime01 1 TFAIL : utime01.c:163: tmp_file access and modification times not set || ||
|-
|| utime02 || || utime02 1 TFAIL : utime02.c:169: tmp_file access and modification times not set || ||
|-
|| utime06 || || utime06 3 TFAIL : utime06.c:151: utime failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| utimes01 || || utimes01 6 TFAIL : utimes01.c:178: utimes() failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| ftest06 || || || ||
|-
|| ksm03 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| ksm03_1 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| overcommit_memory02 || NAB || overcommit_memory.c:235: BROK: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || NAB || overcommit_memory.c:235: BROK: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| ar01 || || TFAIL: ar haven't updated modified file0 (-u) || ||
|-
|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
||
|-
|}

==2.5 M2 RC1 build==
'''total: 27'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| fanotify06 || LTP || tst_test.c:1025: BROK: Test killed by SIGSEGV! || LTP bug. Upstream had fixed it. ||
|-
|| keyctl06 || NAB || keyctl06.c:68: FAIL: KEYCTL_READ returned 4 but expected 8 || This case is for regression test for kernel commits e645016abc80 and 3239b6f29bdf which were introduced by kernel 4.14. It would fail on 4.12 kernel. ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On mip64 arch, the kernel returns EINVAL. ||
|-
|| msgctl10 || NAB || msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| open12 || || open12 4 TBROK : open12.c:244: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| openat02 || || openat02 3 TBROK : openat02.c:204: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || Missing kernel configuration. Kernel should enable CONFIG_QUOTA, CONFIG_QUOTACTL and CONFIG_QUOTA_TREE ||
|-
|| remap_file_pages01 || || || ||
|-
|| renameat201 || || renameat201 2 TFAIL : renameat201.c:154: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:133: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| sendfile09 || || sendfile09 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| sendfile09_64 || || sendfile09_64 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| utime01 || || utime01 1 TFAIL : utime01.c:163: tmp_file access and modification times not set || ||
|-
|| utime02 || || utime02 1 TFAIL : utime02.c:169: tmp_file access and modification times not set || ||
|-
|| utime06 || || utime06 3 TFAIL : utime06.c:151: utime failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| utimes01 || || utimes01 6 TFAIL : utimes01.c:178: utimes() failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| ftest06 || || || ||
|-
|| ksm03 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| ksm03_1 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || KSM configuration is not enabled ||
|-
|| overcommit_memory02 || NAB || overcommit_memory.c:235: BROK: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || NAB || overcommit_memory.c:235: BROK: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| ar01 || || TFAIL: ar haven't updated modified file0 (-u) || ||
|-
|| unshare01 || NAB || TFAIL: unshare --mount --propagation shared mount --bind dir_A dir_B did not get bind info || The propagation type assigned to a new mount point depends on the propagation type of the parent directory. If the mount point has a parent and the propagation type of the parent is MS_SHARED, then the propagation type of the new mount is also MS_SHARED. Otherwise, the propagation type of the new mount is MS_PRIVATE. In this case, the parent mount point of dir_B is rootfs / which is private. So the dir_B is also private and can not be changed back to shared even if set "--propagation shared".

For systemd, it automatically remounts all mount points as MS_SHARED on system startup. So this case can pass on Ubuntu 16.04, CentOS 7 and Poky with systemd but fail on Poky with sysvinit. See NOTES in http://man7.org/linux/man-pages/man7/mount_namespaces.7.html and discussion on https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=739593

To make it pass on Poky with sysvinit, run the following command before run the test case:

mount --make-shared /

cat /proc/self/mountinfo | grep shared

15 0 179:2 / / rw,relatime shared:1 - ext4 /dev/root rw,data=ordered

cd /opt/ltp && ./runltp -p -d /opt/tmp -s unshare01
||
|-
|}

==2.5 M1 RC3 build==
'''total: 25'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| add_key03 || NEW || add_key03.c:86: FAIL: created user keyring for another user || ||
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| keyctl06 || NEW || keyctl06.c:50: FAIL: KEYCTL_READ overran the buffer || ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| msgctl10 || NAB || msgctl10 1 TFAIL : msgctl10.c:157: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| open12 || || open12 4 TBROK : open12.c:244: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| openat02 || || openat02 3 TBROK : openat02.c:204: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y ||
|-
|| remap_file_pages01 || || || ||
|-
|| renameat201 || || renameat201 2 TFAIL : renameat201.c:154: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:133: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| sendfile09 || || sendfile09 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| sendfile09_64 || || sendfile09_64 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| utime01 || || utime01 1 TFAIL : utime01.c:163: tmp_file access and modification times not set || ||
|-
|| utime02 || || utime02 1 TFAIL : utime02.c:169: tmp_file access and modification times not set || ||
|-
|| utime06 || || utime06 3 TFAIL : utime06.c:151: utime failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| utimes01 || || utimes01 6 TFAIL : utimes01.c:178: utimes() failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| ftest06 || || || ||
|-
|| ksm03 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || ||
|-
|| ksm03_1 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || ||
|-
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || ||
|-
|| overcommit_memory02 || || overcommit_memory.c:235: BROK: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || || overcommit_memory.c:235: BROK: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|}

==2.5 M1 RC1 build==
'''total: 26'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| add_key03 || NEW || add_key03.c:86: FAIL: created user keyring for another user || ||
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : safe_macros.c:154: getrusage03_child.c:155: malloc(419430400) failed: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| keyctl06 || NEW || keyctl06.c:50: FAIL: KEYCTL_READ overran the buffer || ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| open12 || || open12 4 TBROK : open12.c:244: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| openat02 || || openat02 3 TBROK : openat02.c:204: lseek64 failed: errno=EINVAL(22): Invalid argument || ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y ||
|-
|| remap_file_pages01 || || || ||
|-
|| renameat201 || || renameat201 2 TFAIL : renameat201.c:154: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:133: renameat2() failed unexpectedly: TEST_ERRNO=EINVAL(22): Invalid argument || ||
|-
|| sendfile09 || || sendfile09 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| sendfile09_64 || || sendfile09_64 1 TBROK : safe_macros.c:452: sendfile09.c:146: write(6,0x1200143c8,18446744073709551615) failed: errno=EFBIG(27): File too large || ||
|-
|| utime01 || || utime01 1 TFAIL : utime01.c:163: tmp_file access and modification times not set || ||
|-
|| utime02 || || utime02 1 TFAIL : utime02.c:169: tmp_file access and modification times not set || ||
|-
|| utime06 || || utime06 3 TFAIL : utime06.c:151: utime failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| utimes01 || || utimes01 6 TFAIL : utimes01.c:178: utimes() failed unexpectedly; expected: 1 - Operation not permitted: TEST_ERRNO=EACCES(13): Permission denied || ||
|-
|| ftest06 || || || ||
|-
|| ksm03 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || ||
|-
|| ksm03_1 || NAB || ksm03.c:71: CONF: KSM configuration is not enabled || ||
|-
|| ksm05 || NAB || ksm05.c:98: CONF: KSM configuration is not enabled || ||
|-
|| overcommit_memory02 || || overcommit_memory.c:235: BROK: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || LTP || YOU NEED TO SET ENVIROMENT VARIABLE PASSWD. || The ltp test script has issue. ||
|-
|| cron_allow01 || LTP || (2) TEST THAT PERSON NOT IN /var/spool/cron/allow IS NOT ABLE TO RUN JOB. Cron allowed user to execute test job, TEST FAILED || The test case specifies /var/spool/cron/allow and /var/spool/cron/deny as the default configure, but in Yocto, we use /etc/cron.allow and /etc/cron.deny. Modify the test script before testing. ||
|-
|| cron_dirs_checks01 || NAB || FAIL: /var/spool/cron. Invalid write access /var/spool/cron FAILED TEST!!!!! || The case requires no write permission for group/other users, however we have to keep write permission for crontab user for /var/spool/cron to make crontab working correctly. ||
|-
|| ar || || ar: `u' modifier ignored since `D' is the default (see `U') 14 TFAIL: ar haven't updated modified file0 (-u) || Already sent a patch to oe ||
|-
|| tar01 || || tar: invalid option -- 'd' 1 TFAIL: tar dvf test.tar > tar.out failed unexpectedly || Busybox tar doesn't have 'd' option. Need to install tar package ||
|-
|}

==2.4 RC1 build==
'''total: 34'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| msgctl10 || || msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y ||
|-
|| remap_file_pages01 || || || ||
|-
|| ftest06 || || || ||
|-
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
|-
|| ksm03 || NEW || mksm03.c:71: CONF: KSM configuration is not enabled || ||
|-
|| ksm03_1 || NEW || mksm03.c:71: CONF: KSM configuration is not enabled || ||
|-
|| ksm05 || NEW || ksm05.c:98: CONF: KSM configuration is not enabled || ||
|-
|| thp01 || NEW || tst_test.c:908: INFO: Timeout per run is 0h 05m 00s execvp: Argument list too long || LTP had a fix for this issue in master ||
|-
|| overcommit_memory01 || ||tst_test.c:908: INFO: Timeout per run is 0h 05m 00s || ||
|-
|| overcommit_memory02 || || overcommit_memory 1 TBROK : overcommit_memory.c:280: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || || overcommit_memory 1 TBROK : overcommit_memory.c:280: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory04 || ||tst_test.c:908: INFO: Timeout per run is 0h 05m 00s || ||
|-
|| overcommit_memory05 || ||tst_test.c:908: INFO: Timeout per run is 0h 05m 00s || ||
|-
|| overcommit_memory06 || ||tst_test.c:908: INFO: Timeout per run is 0h 05m 00s || ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| ar || || ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u) || ||
|-
|| nm01 || || cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed || image shuold install ltp-staticdev ||
|-
|| tar01 || || tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly || Busybox tar has different behavior ||
|-
|| df01_ext2 || NEW || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...] || stat from busybox is missing some options ||
|-
|| df01_ext3 || NEW || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...] || ||
|-
|| df01_ext4 || NEW || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...] || ||
|-
|| df01_xfs || NEW || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...] || ||
|-
|| df01_vfat || NEW || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...] || ||
|-
|| df01_exfat || NEW || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...] || ||
|-
|| df01_ntfs || NEW || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...] || ||
|-
|| mkfs01 || NEW || 1 TFAIL: 'mkfs /dev/loop0 ' failed. || no loop device, I have test it for another /dev/sd* is OK ||
|-
|| mkfs01_ext2 || NEW || 1 TFAIL: 'mkfs /dev/loop0 ' failed. || ||
|-
|| mkfs01_ext3 || NEW || 1 TFAIL: 'mkfs /dev/loop0 ' failed. || ||
|-
|| mkfs01_ext4 || NEW || 1 TFAIL: 'mkfs /dev/loop0 ' failed. || ||
|-
|}

==2.4 M2 RC3 build==
'''total: 29'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| add_key02 || NEW || add_key02.c:98: FAIL: unexpected error with key type 'user': EINVAL || This is a kernel bug, failed on kernel older than 4.12-rc5: https://github.com/linux-test-project/ltp/commit/25045624e941ee76a13febd36187e23c6c435507 ||
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| ioctl03 || || ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory || Before run the ltp, we should add the tun device: modprobe tun ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| msgctl10 || || msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || kernel should be enable the config: CONFIG_QUOTA=y CONFIG_QUOTACTL=y CONFIG_QUOTA_TREE=Y ||
|-
|| ftest06 || || || ||
|-
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
|-
|| mtest06_3 || || tst_test.c:897: BROK: Test killed! (timeout?) || ||
|-
|| overcommit_memory02 || || overcommit_memory 1 TBROK : overcommit_memory.c:280: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || || overcommit_memory 1 TBROK : overcommit_memory.c:280: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| ar || || ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u) || ||
|-
|| nm01 || || cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed || image shuold install ltp-staticdev ||
|-
|| file01 || || file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory) || Fixed ||
|-
|| tar01 || || tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly || Busybox tar has different behavior ||
|-
|| df01_ext2 || NEW || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...] || stat from busybox is missing some options ||
|-
|| df01_ext3 || NEW || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...] || ||
|-
|| df01_ext4 || NEW || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...] || ||
|-
|| df01_xfs || NEW || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...] || ||
|-
|| df01_vfat || NEW || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...] || ||
|-
|| df01_exfat || NEW || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...] || ||
|-
|| df01_ntfs || NEW || stat: invalid option -- '-' Usage: stat [-l] [-f] [-s] [-v] [-h] [-t] [-c format] file1 [file2 ...] || ||
|-
|| mkfs01 || NEW || 1 TFAIL: 'mkfs /dev/loop0 ' failed. || no loop device, I have test it for another /dev/sd* is OK ||
|-
|| mkfs01_ext2 || NEW || 1 TFAIL: 'mkfs /dev/loop0 ' failed. || ||
|-
|| mkfs01_ext3 || NEW || 1 TFAIL: 'mkfs /dev/loop0 ' failed. || ||
|-
|| mkfs01_ext4 || NEW || 1 TFAIL: 'mkfs /dev/loop0 ' failed. || ||
|-
|}

==2.3 RC2 build==
'''total: 19'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| fchmodat01 || || fchmodat01 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15306). || ||
|-
|| fsync02 || NAB || fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 173.000000 seconds; max_block: 95488; data_blocks: 384 || ||
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| ioctl03 || || ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory || ||
|-
|| msgctl10 || || msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. ||
|-
|| utimensat01 || || utimensat01 55 TFAIL : FAILED test 55 || ||
|-
|| ftest06 || || || ||
|-
|| overcommit_memory02 || || overcommit_memory 1 TBROK : overcommit_memory.c:280: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || || overcommit_memory 1 TBROK : overcommit_memory.c:280: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| ar || || ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u) || ||
|-
|| nm01 || || cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed || ||
|-
|| file01 || || file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory) || ||
|-
|| tar01 || || tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly || Busybox tar has different behavior ||
|-
|}

==2.3 M3 RC2 build==
'''total: 19'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| fchmodat01 || NEW || fchmodat01 1 TBROK : tst_sig.c:233: unexpected signal SIGSEGV(11) received (pid = 15306). || ||
|-
|| fsync02 || NAB || fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 173.000000 seconds; max_block: 95488; data_blocks: 384 || ||
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory || Not enough memory. ||
|-
|| ioctl03 || || ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory || ||
|-
|| msgctl10 || || msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| quotactl01 || NAB || quotacheck: Mountpoint (or device) /opt/ltp/tmp/ltp-sGvMvQMbah/quoT3LMdq/mntpoint not found or has no quota enabled. || quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option. ||
|-
|| utimensat01 || || utimensat01 55 TFAIL : FAILED test 55 || ||
|-
|| ftest06 || || || ||
|-
|| overcommit_memory02 || || overcommit_memory 1 TBROK : overcommit_memory.c:280: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || || overcommit_memory 1 TBROK : overcommit_memory.c:280: Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| ar || || ar: `u' modifier ignored since `D' is the default (see `U') ar01 14 TFAIL : ar updated modified file0 (-u) || ||
|-
|| nm01 || NEW || cp: cannot stat '/opt/ltp/testcases/data/nm01/lib.a': No such file or directory nm01 1 TBROK : cp /opt/ltp/testcases/data/nm01/lib.a . failed || ||
|-
|| file01 || || file01 4 TFAIL : in.ksh: was not recognized /opt/ltp/testcases/data/file01/in.ksh: cannot open `/opt/ltp/testcases/data/file01/in.ksh' (No such file or directory) || ||
|-
|| tar01 || || tar01 1 TFAIL : tar dvf test.tar > tar.out failed unexpectedly || Busybox tar has different behavior ||
|-
|}

==2.3 M2 RC3 build==
'''total: 46'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| fsync02 || || fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 125.000000 seconds; max_block: 27271; data_blocks: 384 || ||
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| ioctl03 || || ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory || ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| msgctl10 || ||msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| readahead02 || || readahead02 0 TWARN : readahead02.c:324: using less cache than expected || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:161: renameat2() didn't swap the content of the two files || ||
|-
|| rt_sigaction01 || || || ||
|-
|| rt_sigprocmask01 || || || ||
|-
|| rt_sigsuspend01 || || || ||
|-
|| utimensat01 || || utimensat01 55 TFAIL : FAILED test 55 || ||
|-
|| writev01 || || writev01 4 TFAIL : writev01.c:204: writev failed unexpectedly: errno=EFAULT(14): Bad address || ||
|-
|| writev03 || || writev03 1 TFAIL : writev03.c:145: Got EFAULT || ||
|-
|| writev04 || || writev04 1 TFAIL : writev04.c:164: Got error EFAULT || ||
|-
|| ftest06 || || || ||
|-
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| overcommit_memory01 || LTP || overcommit_memory 5 TFAIL : overcommit_memory.c:254: alloc passed, expected to fail || ||
|-
|| overcommit_memory02 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory04 || LTP ||overcommit_memory 5 TFAIL : overcommit_memory.c:254: alloc passed, expected to fail || ||
|-
|| overcommit_memory05 || LTP || overcommit_memory 5 TFAIL : overcommit_memory.c:254: alloc passed, expected to fail || ||
|-
|| overcommit_memory06 || LTP || overcommit_memory 5 TFAIL : overcommit_memory.c:254: alloc passed, expected to fail || ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| ar || || FAIL - ar with -u flag failed || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || unzip01 1 TFAIL : Test #1: unzip output differs from expected output. || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| df01_ext2 || || stat: invalid option -- '-' || stat from busybox is missing some options ||
|-
|| df01_ext3 || || df01 1 TBROK : mkfs.ext3 /dev/loop0 failed || ||
|-
|| df01_ext4 || || stat: invalid option -- '-' || stat from busybox is missing some options ||
|-
|| mkfs01 || || mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed || ||
|-
|| mkfs01_ext2 || || mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed. || ||
|-
|| mkfs01_ext3 || || mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed. || ||
|-
|| mkfs01_ext4 || || mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed. || ||
|-
|| which01 || || which01 1 TFAIL : 'which pname' failed, not expected. || ||
|-
|}

==2.3 M1 RC1 build==
'''total: 41'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| ioctl03 || || ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory || ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| mmap16 || NEW || mmap16 1 TBROK : tst_checkpoint.c:130: mmap16.c:222: tst_checkpoint_wait(0, 10000): errno=ETIMEDOUT(145): Connection timed out || ||
|-
|| msgctl10 || ||msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| readahead02 || || readahead02 0 TWARN : readahead02.c:324: using less cache than expected || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:161: renameat2() didn't swap the content of the two files || ||
|-
|| rt_sigaction01 || || || ||
|-
|| rt_sigprocmask01 || || || ||
|-
|| rt_sigsuspend01 || || || ||
|-
|| utimensat01 || || utimensat01 55 TFAIL : FAILED test 55 || ||
|-
|| writev01 || || writev01 4 TFAIL : writev01.c:204: writev failed unexpectedly: errno=EFAULT(14): Bad address || ||
|-
|| writev03 || || writev03 1 TFAIL : writev03.c:145: Got EFAULT || ||
|-
|| writev04 || || writev04 1 TFAIL : writev04.c:164: Got error EFAULT || ||
|-
|| ftest06 || || || ||
|-
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| overcommit_memory02 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| ar || || FAIL - ar with -u flag failed || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || unzip01 1 TFAIL : Test #1: unzip output differs from expected output. || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| df01_ext2 || || stat: invalid option -- '-' || stat from busybox is missing some options ||
|-
|| df01_ext3 || || df01 1 TBROK : mkfs.ext3 /dev/loop0 failed || ||
|-
|| df01_ext4 || || stat: invalid option -- '-' || stat from busybox is missing some options ||
|-
|| mkfs01 || || mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed || ||
|-
|| mkfs01_ext2 || || mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed. || ||
|-
|| mkfs01_ext3 || || mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed. || ||
|-
|| mkfs01_ext4 || || mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed. || ||
|-
|| which01 || || which01 1 TFAIL : 'which pname' failed, not expected. || ||
|-
|}

==2.2 RC4 build==
'''total: 41'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| ioctl03 || || ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory || ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| msgctl10 || NEW ||msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| readahead02 || || readahead02 0 TWARN : readahead02.c:324: using less cache than expected || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:161: renameat2() didn't swap the content of the two files || ||
|-
|| rt_sigaction01 || || || ||
|-
|| rt_sigprocmask01 || || || ||
|-
|| rt_sigsuspend01 || || || ||
|-
|| utimensat01 || || utimensat01 55 TFAIL : FAILED test 55 || ||
|-
|| writev01 || || writev01 4 TFAIL : writev01.c:204: writev failed unexpectedly: errno=EFAULT(14): Bad address || ||
|-
|| writev03 || || writev03 1 TFAIL : writev03.c:145: Got EFAULT || ||
|-
|| writev04 || || writev04 1 TFAIL : writev04.c:164: Got error EFAULT || ||
|-
|| ftest06 || || || ||
|-
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| overcommit_memory02 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || LTP || overcommit_memory 1 TBROK : overcommit_memory.c:280: Unexpected error: CommitLimit < Committed_AS || ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| ar || || FAIL - ar with -u flag failed || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || unzip01 1 TFAIL : Test #1: unzip output differs from expected output. || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| df01_ext2 || || stat: invalid option -- '-' || stat from busybox is missing some options ||
|-
|| df01_ext3 || || df01 1 TBROK : mkfs.ext3 /dev/loop0 failed || ||
|-
|| df01_ext4 || || stat: invalid option -- '-' || stat from busybox is missing some options ||
|-
|| mkfs01 || || mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed || ||
|-
|| mkfs01_ext2 || || mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed. || ||
|-
|| mkfs01_ext3 || || mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed. || ||
|-
|| mkfs01_ext4 || || mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed. || ||
|-
|| which01 || || which01 1 TFAIL : 'which pname' failed, not expected. || ||
|-
|}

==2.2 M3 RC1 build==
'''total: 39'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| fsync02 || || fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 350.000000 seconds; max_block: 171510; data_blocks: 384 || ||
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| ioctl03 || || ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory || ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| msgctl10 || NEW ||msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| readahead02 || || readahead02 0 TWARN : readahead02.c:324: using less cache than expected || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:161: renameat2() didn't swap the content of the two files || ||
|-
|| rt_sigaction01 || || || ||
|-
|| rt_sigprocmask01 || || || ||
|-
|| rt_sigsuspend01 || || || ||
|-
|| ftest06 || || || ||
|-
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| overcommit_memory02 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || LTP || overcommit_memory 1 TBROK : overcommit_memory.c:280: Unexpected error: CommitLimit < Committed_AS || ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| ar || || FAIL - ar with -u flag failed || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || unzip01 1 TFAIL : Test #1: unzip output differs from expected output. || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| df01_ext2 || || stat: invalid option -- '-' || stat from busybox is missing some options ||
|-
|| df01_ext3 || || df01 1 TBROK : mkfs.ext3 /dev/loop0 failed || ||
|-
|| df01_ext4 || || stat: invalid option -- '-' || stat from busybox is missing some options ||
|-
|| mkfs01 || || mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed || ||
|-
|| mkfs01_ext2 || || mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed. || ||
|-
|| mkfs01_ext3 || || mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed. || ||
|-
|| mkfs01_ext4 || || mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed. || ||
|-
|| mkfs01_minix || || mkfs01 1 TFAIL : 'mkfs -t minix /dev/loop0 ' failed. || ||
|-
|| which01 || || which01 1 TFAIL : 'which pname' failed, not expected. || ||
|-
|}

==2.2 M2 RC1 build==
'''total: 41'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| chmod06 || || chmod06 0 TINFO : No free devices found || ||
|-
|| fsync02 || || fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 350.000000 seconds; max_block: 171510; data_blocks: 384 || ||
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| ioctl03 || || ioctl03 1 TBROK : ioctl03.c:100: opening /dev/net/tun failed: errno=ENOENT(2): No such file or directory || ||
|-
|| inotify03 || || inotify03 0 TINFO : No free devices found || ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| msgctl10 || NEW ||msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| readahead02 || || readahead02 0 TWARN : readahead02.c:324: using less cache than expected || ||
|-
|| renameat202 || || renameat202 1 TFAIL : renameat202.c:161: renameat2() didn't swap the content of the two files || ||
|-
|| rt_sigaction01 || || || ||
|-
|| rt_sigprocmask01 || || || ||
|-
|| rt_sigsuspend01 || || || ||
|-
|| ftest06 || || || ||
|-
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| overcommit_memory02 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || LTP || overcommit_memory 1 TBROK : overcommit_memory.c:280: Unexpected error: CommitLimit < Committed_AS || ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| ar || || FAIL - ar with -u flag failed || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || unzip01 1 TFAIL : Test #1: unzip output differs from expected output. || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| df01_ext2 || || stat: invalid option -- '-' || stat from busybox is missing some options ||
|-
|| df01_ext3 || || df01 1 TBROK : mkfs.ext3 /dev/loop0 failed || ||
|-
|| df01_ext4 || || stat: invalid option -- '-' || stat from busybox is missing some options ||
|-
|| mkfs01 || || mkfs01 1 TFAIL : 'mkfs /dev/loop0 ' failed || ||
|-
|| mkfs01_ext2 || || mkfs01 1 TFAIL : 'mkfs -t ext2 /dev/loop0 ' failed. || ||
|-
|| mkfs01_ext3 || || mkfs01 1 TFAIL : 'mkfs -t ext3 /dev/loop0 ' failed. || ||
|-
|| mkfs01_ext4 || || mkfs01 1 TFAIL : 'mkfs -t ext4 /dev/loop0 ' failed. || ||
|-
|| mkfs01_minix || || mkfs01 1 TFAIL : 'mkfs -t minix /dev/loop0 ' failed. || ||
|-
|| which01 || || which01 1 TFAIL : 'which pname' failed, not expected. || ||
|-
|}

==2.0 RC3 build==
'''total: 38'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| fsync02 || NEW || fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 350.000000 seconds; max_block: 171510; data_blocks: 384 || ||
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| msgctl10 || NEW ||msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| rt_sigaction01 || || || ||
|-
|| rt_sigprocmask01 || || || ||
|-
|| rt_sigsuspend01 || || || ||
|-
|| syslog01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog03 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog04 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog05 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog06 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog07 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog08 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog09 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog10 || [[qemux86-ltp|qemux86]] || || ||
|-
|| proc01 || NEW || proc01 8 TFAIL : proc01.c:461: readproc() failed with 7 errors. || ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| thp02 || NAB || thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| thp03 || NAB || thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
|-
|| overcommit_memory02 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || LTP || overcommit_memory 1 TBROK : overcommit_memory.c:280: Unexpected error: CommitLimit < Committed_AS || ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || unzip01 1 TFAIL : Test #1: unzip output differs from expected output. || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|}

==2.0 RC2 build==
'''total: 38'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| fsync02 || NEW || fsync02 1 TFAIL : fsync02.c:136: fsync took too long: 350.000000 seconds; max_block: 171510; data_blocks: 384 || ||
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| msgctl10 || NEW ||msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| rt_sigaction01 || || || ||
|-
|| rt_sigprocmask01 || || || ||
|-
|| rt_sigsuspend01 || || || ||
|-
|| syslog01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog03 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog04 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog05 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog06 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog07 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog08 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog09 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog10 || [[qemux86-ltp|qemux86]] || || ||
|-
|| proc01 || NEW || proc01 8 TFAIL : proc01.c:461: readproc() failed with 7 errors. || ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| thp02 || NAB || thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| thp03 || NAB || thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
|-
|| overcommit_memory02 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || LTP || overcommit_memory 1 TBROK : overcommit_memory.c:280: Unexpected error: CommitLimit < Committed_AS || ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || unzip01 1 TFAIL : Test #1: unzip output differs from expected output. || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|}

==1.9 M3 RC1 build==
'''total: 40'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| msgctl10 || NEW ||msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| rt_sigaction01 || || || ||
|-
|| rt_sigprocmask01 || || || ||
|-
|| rt_sigsuspend01 || || || ||
|-
|| syslog01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog03 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog04 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog05 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog06 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog07 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog08 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog09 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog10 || [[qemux86-ltp|qemux86]] || || ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| thp02 || NAB || thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| thp03 || NAB || thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
|-
|| overcommit_memory01 || NEW || overcommit_memory 5 TFAIL : overcommit_memory.c:254: alloc passed, expected to fail || ||
|-
|| overcommit_memory02 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || LTP || overcommit_memory 1 TBROK : overcommit_memory.c:280: Unexpected error: CommitLimit < Committed_AS || ||
|-
|| overcommit_memory04 || NEW || overcommit_memory 5 TFAIL : overcommit_memory.c:254: alloc passed, expected to fail || ||
|-
|| overcommit_memory05 || NEW || overcommit_memory 5 TFAIL : overcommit_memory.c:254: alloc passed, expected to fail || ||
|-
|| overcommit_memory06 || NEW || overcommit_memory 5 TFAIL : overcommit_memory.c:254: alloc passed, expected to fail || ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || unzip01 1 TFAIL : Test #1: unzip output differs from expected output. || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|}

==1.9 M2 RC2 build==
'''total: 38'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| getrusage04 || NEW || getrusage04 1 TFAIL : getrusage04.c:133: stime increased > 11000us: || ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| msgctl10 || NEW ||msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| rt_sigaction01 || || || ||
|-
|| rt_sigprocmask01 || || || ||
|-
|| rt_sigsuspend01 || || || ||
|-
|| syslog01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog03 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog04 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog05 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog06 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog07 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog08 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog09 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog10 || [[qemux86-ltp|qemux86]] || || ||
|-
|| utimensat01 || NEW || utimensat01 1 TBROK : ltpapicmd.c:190: sudo cannot be run by user non-interactively || ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| thp02 || NAB || thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| thp03 || NAB || thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
|-
|| overcommit_memory02 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || LTP || overcommit_memory 1 TBROK : overcommit_memory.c:280: Unexpected error: CommitLimit < Committed_AS || ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || unzip01 1 TFAIL : Test #1: unzip output differs from expected output. || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|}

==1.9 M1 RC2 build==
'''total: 36'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| mmap15 || NAB || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| msgctl10 || NEW ||msgctl10 1 TFAIL : msgctl10.c:168: Fork failed (may be OK if under stress) || May be OK if under stress ||
|-
|| rt_sigaction01 || || || ||
|-
|| rt_sigprocmask01 || || || ||
|-
|| rt_sigsuspend01 || || || ||
|-
|| syslog01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog03 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog04 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog05 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog06 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog07 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog08 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog09 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog10 || [[qemux86-ltp|qemux86]] || || ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| thp02 || NAB || thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| thp03 || NAB || thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
|-
|| overcommit_memory02 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || LTP || overcommit_memory 1 TBROK : overcommit_memory.c:280: Unexpected error: CommitLimit < Committed_AS || ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || unzip01 1 TFAIL : Test #1: unzip output differs from expected output. || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|}

==1.8 M4 RC2 build==
'''total: 40'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| mmap15 || NEW || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| rt_sigaction01 || NEW || || ||
|-
|| rt_sigprocmask01 || NEW || || ||
|-
|| rt_sigsuspend01 || NEW || || ||
|-
|| syslog01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog03 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog04 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog05 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog06 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog07 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog08 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog09 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog10 || [[qemux86-ltp|qemux86]] || || ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| thp02 || NAB || thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| thp03 || NAB || thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| isofs || NAB || isofs 1 TFAIL : tst_resm TFAIL mkisofs -o isofs.iso -quiet /opt/tmp/ltp-86GY0DNKDi/isofs.n7KQ854gld/tmp//etc/ || No mkisofs command ||
|-
|| overcommit_memory01 || NEW || overcommit_memory 5 TFAIL : overcommit_memory.c:248: alloc passed, expected to fail || ||
|-
|| overcommit_memory02 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| overcommit_memory03 || NEW || overcommit_memory 5 TFAIL : overcommit_memory.c:248: alloc passed, expected to fail || ||
|-
|| overcommit_memory04 || NEW || overcommit_memory 5 TFAIL : overcommit_memory.c:248: alloc passed, expected to fail || ||
|-
|| overcommit_memory05 || NEW || overcommit_memory 5 TFAIL : overcommit_memory.c:248: alloc passed, expected to fail || ||
|-
|| overcommit_memory06 || NEW || overcommit_memory 5 TFAIL : overcommit_memory.c:248: alloc passed, expected to fail || ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| ar || LTP || FAIL - ar with -u flag failed || LTP bug. Already fixed in upstream ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || unzip01 1 TFAIL : Test #1: unzip output differs from expected output. || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|}

==1.8 M3 RC3 build==
'''total: 34'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| mmap15 || NEW || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| rt_sigaction01 || NEW || || ||
|-
|| rt_sigprocmask01 || NEW || || ||
|-
|| rt_sigsuspend01 || NEW || || ||
|-
|| syslog01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog03 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog04 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog05 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog06 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog07 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog08 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog09 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog10 || [[qemux86-ltp|qemux86]] || || ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| thp02 || NAB || thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| thp03 || NAB || thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| isofs || NEW || isofs 1 TFAIL : tst_resm ||
|-
|| overcommit_memory02 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || unzip01 1 TFAIL : Test #1: unzip output differs from expected output. || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|}

==1.8 M1 RC1 build==
'''total: 34'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| mmap15 || NEW || mmap15 1 TFAIL : mmap15.c:86: mmap into high region failed unexpectedly - expect errno=ENOMEM, got: errno=EINVAL(22): Invalid argument || On some archs, the kernel returns EINVAL. ||
|-
|| rt_sigaction01 || NEW || || ||
|-
|| rt_sigprocmask01 || NEW || || ||
|-
|| rt_sigsuspend01 || NEW || || ||
|-
|| syslog01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog03 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog04 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog05 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog06 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog07 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog08 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog09 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog10 || [[qemux86-ltp|qemux86]] || || ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| thp02 || NAB || thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| thp03 || NAB || thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| isofs || NEW || isofs 1 TFAIL : tst_resm ||
|-
|| overcommit_memory02 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || unzip01 1 TFAIL : Test #1: unzip output differs from expected output. || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|}

==1.7 M4 RC5 20141018 build==
'''total: 33'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| eventfd01 || LTP || eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 13 TBROK : error triggering eventfd overflow
eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 14 TBROK : error triggering eventfd overflow
eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 15 TBROK : error triggering eventfd overflow
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| io_submit01 || LTP || io_submit01 6 TFAIL : unexpected failure - returned value = -22 : Invalid argument, expected value = -9 : Bad file descriptor
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| syslog01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog03 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog04 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog05 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog06 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog07 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog08 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog09 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog10 || [[qemux86-ltp|qemux86]] || || ||
|-
|| aio01 || LTP || aio01 1 TFAIL : Test 1: io_submit failed - retval=-22, errno=0
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| aio02 || LTP || io_submit tio: Invalid argument
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| thp02 || NAB || thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| thp03 || NAB || thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| overcommit_memory02 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || unzip01 1 TFAIL : Test #1: unzip output differs from expected output. || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|}

==1.7 M4 RC4 20141011 build==
'''total: 33'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| eventfd01 || LTP || eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 13 TBROK : error triggering eventfd overflow
eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 14 TBROK : error triggering eventfd overflow
eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 15 TBROK : error triggering eventfd overflow
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| io_submit01 || LTP || io_submit01 6 TFAIL : unexpected failure - returned value = -22 : Invalid argument, expected value = -9 : Bad file descriptor
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| syslog01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog03 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog04 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog05 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog06 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog07 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog08 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog09 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog10 || [[qemux86-ltp|qemux86]] || || ||
|-
|| aio01 || LTP || aio01 1 TFAIL : Test 1: io_submit failed - retval=-22, errno=0
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| aio02 || LTP || io_submit tio: Invalid argument
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| thp02 || NAB || thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| thp03 || NAB || thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| overcommit_memory02 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || unzip01 1 TFAIL : Test #1: unzip output differs from expected output. || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|}

==1.7 M2 RC1 20140730 build==
'''total: 35'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| eventfd01 || LTP || eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 13 TBROK : error triggering eventfd overflow
eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 14 TBROK : error triggering eventfd overflow
eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 15 TBROK : error triggering eventfd overflow
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| io_submit01 || LTP || io_submit01 6 TFAIL : unexpected failure - returned value = -22 : Invalid argument, expected value = -9 : Bad file descriptor
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| setregid02 || LTP || setregid02 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success || ||
|-
|| setregid02_16 || LTP || setregid02_16 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success || ||
|-
|| syslog01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog03 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog04 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog05 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog06 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog07 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog08 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog09 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog10 || [[qemux86-ltp|qemux86]] || || ||
|-
|| aio01 || LTP || aio01 1 TFAIL : Test 1: io_submit failed - retval=-22, errno=0
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| aio02 || LTP || io_submit tio: Invalid argument
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| thp02 || NAB || thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| thp03 || NAB || thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| overcommit_memory02 || LTP || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || In some target with 0 swap, the value of CommitLimit (Swap+RAM*overcommit_ratio) is 0 when overcommit_ratio is set to 0. This will break the test because the test want to make sure that CommitLimit > Committed_AS. ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || || sh: unzip_tests.sh: command not found || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|}

==1.7 M1 RC1 20140625 build==
'''total: 35'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| eventfd01 || LTP || eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 13 TBROK : error triggering eventfd overflow
eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 14 TBROK : error triggering eventfd overflow
eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 15 TBROK : error triggering eventfd overflow
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| io_submit01 || LTP || io_submit01 6 TFAIL : unexpected failure - returned value = -22 : Invalid argument, expected value = -9 : Bad file descriptor
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| setregid02 || LTP || setregid02 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success || ||
|-
|| setregid02_16 || LTP || setregid02_16 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success || ||
|-
|| syslog01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog03 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog04 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog05 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog06 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog07 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog08 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog09 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog10 || [[qemux86-ltp|qemux86]] || || ||
|-
|| aio01 || LTP || aio01 1 TFAIL : Test 1: io_submit failed - retval=-22, errno=0
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| aio02 || LTP || io_submit tio: Invalid argument
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| thp02 || NAB || thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| thp03 || NAB || thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| overcommit_memory02 || || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || || sh: unzip_tests.sh: command not found || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|}

==1.6 M5 RC4 20140411 build==
'''total: 35'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| eventfd01 || LTP || eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 13 TBROK : error triggering eventfd overflow
eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 14 TBROK : error triggering eventfd overflow
eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 15 TBROK : error triggering eventfd overflow
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| io_submit01 || LTP || io_submit01 6 TFAIL : unexpected failure - returned value = -22 : Invalid argument, expected value = -9 : Bad file descriptor
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| setregid02 || LTP || setregid02 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success || ||
|-
|| setregid02_16 || LTP || setregid02_16 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success || ||
|-
|| syslog01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog03 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog04 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog05 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog06 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog07 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog08 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog09 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog10 || [[qemux86-ltp|qemux86]] || || ||
|-
|| aio01 || LTP || aio01 1 TFAIL : Test 1: io_submit failed - retval=-22, errno=0
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| aio02 || LTP || io_submit tio: Invalid argument
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| thp02 || NAB || thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| thp03 || NAB || thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| overcommit_memory02 || || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|}

==1.6 M5 RC2 20140402 build==
'''total: 35'''
{|border="1"
|| '''LTP cases'''|| '''status''' || '''error msg''' || '''comment''' || '''bugzilla'''
|-
|| eventfd01 || LTP || eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 13 TBROK : error triggering eventfd overflow
eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 14 TBROK : error triggering eventfd overflow
eventfd01 0 TINFO : error submitting iocb: errno=EINVAL(22): Invalid argument
eventfd01 15 TBROK : error triggering eventfd overflow
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| getrusage03 || NAB || getrusage03_child 1 TBROK : malloc failed at getrusage03_child.c:158: errno=ENOMEM(12): Cannot allocate memory
|| Not enough memory. ||
|-
|| fanotify01 || NAB || fanotify01 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify02 || NAB || fanotify02 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| fanotify04 || NAB || fanotify04 1 TCONF : fanotify is not configured in this kernel. || ||
|-
|| io_submit01 || LTP || io_submit01 6 TFAIL : unexpected failure - returned value = -22 : Invalid argument, expected value = -9 : Bad file descriptor
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| setregid02 || LTP || setregid02 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success || ||
|-
|| setregid02_16 || LTP || setregid02_16 1 TBROK : getgrnam("nobody") failed: errno=???(0): Success || ||
|-
|| syslog01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog03 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog04 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog05 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog06 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog07 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog08 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog09 || [[qemux86-ltp|qemux86]] || || ||
|-
|| syslog10 || [[qemux86-ltp|qemux86]] || || ||
|-
|| aio01 || LTP || aio01 1 TFAIL : Test 1: io_submit failed - retval=-22, errno=0
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| aio02 || LTP || io_submit tio: Invalid argument
|| On mips64, io_submit calls console_fops's aio_read/aio_write instead of ext3 or nfs counterpart. But tty driver doesn't implement aio_read and aio_write at all. ||
|-
|| mtest06_2 || NAB || main(): mmap(): Cannot allocate memory || Not enough memory. ||
|-
|| thp02 || NAB || thp02 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| thp03 || NAB || thp03 1 TBROK : cannot find "Hugepagesize:" in /proc/meminfo || MIPS64 doesn't support it ||
|-
|| overcommit_memory02 || || overcommit_memory 1 TBROK : Unexpected error: CommitLimit < Committed_AS || ||
|-
|| su01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron02 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_deny01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_allow01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron_dirs_checks01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| file || [[qemux86-ltp|qemux86]] || || ||
|-
|| cron || [[qemux86-ltp|qemux86]] || || ||
|-
|| logrotate || [[qemux86-ltp|qemux86]] || || ||
|-
|| cpio || [[qemux86-ltp|qemux86]] || || ||
|-
|| unzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|| gzip01 || [[qemux86-ltp|qemux86]] || || ||
|-
|}

LTP result

2020-04-10T01:10:46Z

Yzhao: /* Current Milestone (3.1 RC2 build) */

==Introduction==
Linux Test Project (LTP) is an open source project with a goal to deliver test suites to the open source community that validate the reliability, robustness, and stability of Linux. (http://ltp.sourceforge.net)

Unlike typical desktop/server distributions, embedded linux distribution is highly customized for a specific purpose. It's not unusual to observe more failures in Yocto than in a typical desktop Linux distro like Ubuntu, etc. So the major purposes of this work are:
* to understand the reasons for existing LTP failures. If the cause is from a specific package itself, go to fix it. Or else if the error simply come from the fact that a given package doesn't exist in current profile, add the explanation here
* to track LTP test results cross Yocto releases, and ensure a declining error number for same profile
* to be the reference if Yocto users want to get a base picture

==Overall trend==

Overall trend tends to track the change of LTP test results along with Yocto's progress. Previous data in 0.9 is not complete and not consistent configured on all targets. So we start from 1.0-M2 as the starting point.

In below table we list total LTP failures for each architectures in each milestone: (now this wiki doesn't allow upload files. So for detail logs please refer to earlier bug link)

{|border="1"
|| '''Milestone''' || '''sugarbay''' || '''qemux86''' || '''qemu-x86_64''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''atom-pc''' || '''blacksand''' || '''beagleboard''' || '''routerstation''' || '''mpc8315e-rdb''' || '''huronriver''' || '''edgerouter''' || '''beaglebone''' || '''genericx86-64'''
|-
|| 3.1 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 20 || 7 ||
|-
|| 3.0 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 9 || n/a || 19 || 5 ||
|-
|| 2.7 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 10 || n/a || 16 || 6 ||
|-
|| 2.7 M3 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 13 || n/a || 16 || 6 ||
|-
|| 2.7 M2 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 10 || n/a || 18 || 8 ||
|-
|| 2.7 M1 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 10 || n/a || 18 || 8 ||
|-
|| 2.6 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 11 || n/a || 19 || 9 ||
|-
|| 2.6 M3 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 13 || n/a || 21 || 10 ||
|-
|| 2.6 M2 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 11 || n/a || 23 || 9 ||
|-
|| 2.6 M1 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 11 || n/a || n/a || 10 ||
|-
|| 2.5 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 13 || n/a || 25 || 11 ||
|-
|| 2.5 M3 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 13 || n/a || 26 || 12 ||
|-
|| 2.5 M2 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 13 || n/a || 27 || 12 ||
|-
|| 2.5 M1 RC3 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 13 || n/a || 25 || 12 ||
|-
|| 2.5 M1 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 15 || n/a || 26 || 15 ||
|-
|| 2.4 RC3 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 29 || n/a || || 18 || 26
|-
|| 2.4 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 30 || n/a || || 17 || 27
|-
|| 2.4 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 31 || n/a || 34 || 18 || 27
|-
|| 2.4 M3 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 31 || n/a || 32 || 17 || 26
|-
|| 2.4 M2 RC3 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 27 || n/a || 29 || 15 || 23
|-
|| 2.4 M2 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 30 || n/a || || || 24
|-
|| 2.4 M1 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 30 || n/a || || || 22
|-
|| 2.3 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 18 || n/a || 19 || 17 ||
|-
|| 2.3 M3 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 18 || n/a || 19 || 18 || 15
|-
|| 2.3 M2 RC3 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 38 || n/a || 46 || 31 || 25
|-
|| 2.3 M1 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 36 || n/a || 41 || 31 || 25
|-
|| 2.2 RC4 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 35 || n/a || 41 || 31 || 21
|-
|| 2.2 M3 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 33 || n/a || 39 || 26 || 22
|-
|| 2.2 M2 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 35 || n/a || 41 || 36 || 22
|-
|| 2.1 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 42 || n/a || 38 || 35 || 19
|-
|| 2.0 RC3 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 33 || n/a || 38 || 34 || 23
|-
|| 2.0 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 33 || n/a || 38 || 34 || 23
|-
|| 1.9 M3 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 33 || n/a || 40 || 33 || 23
|-
|| 1.9 M2 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 33 || n/a || 38 || 33 || 24
|-
|| 1.9 M1 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 32 || n/a || 36 || 33 || 24
|-
|| 1.8 M4 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 32 || n/a || 40 || 32 || 24
|-
|| 1.8 M3 RC3 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 32 || n/a || 34 || 32 || 25
|-
|| 1.8 M1 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 32 || n/a || 34 || 31 || 24
|-
|| 1.7 M4 RC5 20141018 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 32 || n/a || 33 || 29 || 22
|-
|| 1.7 M4 RC4 20141011 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 32 || n/a || 33 || 29 || 22
|-
|| 1.7 M2 RC1 20140730 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || || n/a || 35 || 31 || 25
|-
|| 1.7 M1 RC1 20140625 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || || n/a || 35 || 31 || 25
|-
|| 1.5.2 RC3 20140428 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 32 || 37 || 26 || n/a || n/a || n/a || 16
|-
|| 1.6 M5 RC4 20140411 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 34 || n/a || 35 || || 24
|-
|| 1.6 M5 RC2 20140402 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 34 || n/a || 35 || || 28
|-
|| 1.6 M5 RC1 20140326 build || 28 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 32 || 40 || 34 || n/a
|-
|| 1.6 M4 RC1 20140312 build || 30 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 33 || 41 || 36 || n/a
|-
|| 1.6 M3 RC2 20140218 build || 30 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 34 || 44 || 36 || n/a
|-
|| 1.6 M3 RC1 20140213 build || || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 34 || 44 || 36 || n/a
|-
|| 1.6 M2 RC1 20140114 build || 25 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 29 || 40 || 30 || n/a
|-
|| 1.5.1 RC2 20131203 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 37 || 29 || n/a
|-
|| 1.6 M1 RC1 20131203 build || 25 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 37 || 30 || n/a
|-
|| 1.5 M5 RC6 build || 21 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 40 || 28 || n/a
|-
|| 1.5 M4 RC3 build || 20 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 39 || 25 || n/a
|-
|| 1.5 M4 RC2 build || 20 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 40 || 25 || n/a
|-
|| 1.4.2 RC1 build || 21 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 25 || 35 || 19 || n/a
|-
|| 1.5 M3 RC1 20130731 build || 20 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 37 || 26 || n/a
|-
|| 1.5 M2 RC1 20130703 build || 20 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 25 || n/a
|-
|| 1.4.1 RC1 20130612 build || 21 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 23 || 36 || 19 || n/a
|-
|| 1.5 M1 RC1 20130604 build || 19 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 28 || n/a || 23 || n/a
|-
|| 1.3.2 20130516 build || 24 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 23 || 42 || 18 || n/a
|-
|| 1.4 M6 RC2 20130418 build || 21 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 23 || 37 || 19 || n/a
|-
|| 1.4 M5 RC3 20130403 build || 20 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 24 || n/a || 21 || n/a
|-
|| 1.4 M5 RC2 20130327 build || 20 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 24 || 36 || 19 || n/a
|-
|| 1.4 M4 RC1 20130220 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 22 || 38 || 19 || 16
|-
|| 1.4 M3 RC2 20130131 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 24 || 40 || 23 || 17
|-
|| 1.4 M3 RC1 20130122 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 22 || 39 || 22 || 17
|-
|| 1.2.2 20130105 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 21 || 38 || 21 || 17
|-
|| 1.2.2 20121206 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 21 || 38 || 21 || 17
|-
|| 1.4 M1 RC1 20121128 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 22 || 39 || 18 || 17
|-
|| 1.2.2 20121018 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 23 || 40 || 21 || 17
|-
|| 1.3 M5 RC4 20121010 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 21 || 22 || 38 || 18 || 16
|-
|| 1.3 M5 RC3 20121003 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 27 || 22 || 39 || 18 || 17
|-
|| 1.3 M5 RC2 20120926 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 24 || 22 || 38 || 18 || 27
|-
|| 1.3 M4 RC3 20120916 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 13 || 23 || 40 || 20 || 15
|-
|| 1.3 M3 RC2 20120814 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 23 || 33 || 21 || 17
|-
|| 1.3 20120801 build || 17 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 24 || 32 || 24 || 17
|-
|| 1.3 M2 RC1 20120712 build ||18 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 26 || 32 || n/a || n/a
|-
|| 1.1.2 20120630 build || 36 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 41 || 42 || 29 || n/a
|-
|| 1.2.1 20120629 build || 19 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 23 || 30 || 22 || n/a
|-
|| 1.3 20120613 build || 27 || n/a || n/a || n/a || n/a || n/a || n/a || 16 || 33 || 41 || 30 || n/a
|-
|| 1.3 20120606 build || || n/a || n/a || n/a || n/a || n/a || n/a || 15 || 32 || 39 || 29 || n/a
|-
|| Denzil (1.2 RC5) || 18 || n/a || n/a || n/a || n/a || n/a || n/a || 21 || 24 || 30 || 21 || n/a
|-
|| Denzil (1.2 RC4) || 18 || n/a || n/a || n/a || n/a || n/a || n/a || 21 || 24 || 30 || 23 || n/a
|-
|| 1.2-M4 RC3 || 18 || n/a || n/a || n/a || n/a || n/a || n/a || 21 || 24 || n/a || 21 || n/a
|-
|| 1.2-M4 RC2 || 17 || n/a || n/a || n/a || n/a || n/a || n/a || 21 || 22 || 28 || 20 || n/a
|-
|| 1.2-M4 RC1 || 17 || n/a || n/a || n/a || n/a || n/a || n/a || 16 || 22 || 28 || 20 || n/a
|-
|| 1.2-M3 RC1 || 17 || n/a || n/a || n/a || n/a || n/a || n/a || 16 || 22 || 29 || 20 || n/a
|-
|| 1.1.1 || 36 || n/a || n/a || n/a || n/a || n/a || n/a || 36 || 41 || 43 || 41 || n/a
|-
|| 1.2-M2 RC1 || 26 || n/a || n/a || n/a || n/a || n/a || n/a || 27 || 30 || 37 || 31 || n/a
|-
|| 1.2-M1 RC2 || 34 || n/a || n/a || 34 || 35 || 33 || n/a || 36 || 39 || 40 || 38 || n/a
|-
|| 1.0.2 || || n/a || n/a || 35 || 35 || 35 || n/a || || 36 || 137 (*) || 36 || n/a
|-
|| 1.1-M4 RC4 || 35 || n/a || n/a || 38 || 39 || 37 || n/a || 36 || 41 || 43 || 39 || n/a
|-
|| 1.1-M4 RC3 || 37 || n/a || n/a || 37 || 38 || 37 || n/a || 37 || 41 || 44 || 39 || n/a
|-
|| 1.1-M4 RC2 || 26 || n/a || n/a || 38 || 39 || 37 || n/a || 26 || 43 || 59 || 39 || n/a
|-
|| 1.1-M3 || 27 || n/a || n/a || 35 || 37 || 36 || n/a || 28 || 41 || 57 || 42 || n/a
|-
|| 1.1-M2 || 30 || n/a || n/a || 25 || 29 || 26 || n/a || 28 || 33 || 146 (*) || 31 || n/a
|-
|| 1.1-M1 || 33 || n/a || n/a || 26 || 29 || 26 || n/a || 30 || 34 || 146 (*) || 32 || n/a
|-
|| 1.0-M2 || || 34 || 32 || 34 || 37 || 37 || 33 || 29 || 35 || 145 (*) || || n/a
|}
*: routerstation has kernel config issues. See later for detail.

general tips:
* Yocto links /tmp to /var/volatiles/tmp which is dynamically created at each boot. This causes one issue to LTP test. /var is normally not writable to non-root users, while LTP does run some test cases under non-root accounts. This causes considerable failures (~60 in qemux86) when creating temporary contents under /tmp. The workaround to this issue is to use "-d newtmpdir" when running LTP, where newtmpdir is created with full write permissions to all users.
* There's a puzzle which profile should be chosen as the test target. Now SDK is chosen because same image can work on both qemu and real hardware. LSB profile provides better result which is more desktop like but now this profile doesn't run on real hardware and lack of some development packages like gcc. For now we just keep this choice, and introduce a Not-A-Bug type to mark failures which are caused simply because related packages are missing
** It's better to use a tmp dir from the 2nd disk which contains ltp test suite. This way it avoids some noisy disk space limitation errors
* suggest to use "-m 512" as some tests are memory stress
* suggest to disable hackbench from runtest/sched, which is not suitable to run in emulator, and simply hang
* don't use "-q" option when running ltp, which hides many useful output info

==Test Configuration and Environment==
'''LTP version''': ltp-20200120

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result.log -C result.fail -d /opt/ltp/tmp &> result.fulllog

The below table includes which LTP categories are included in the measurement:

{|border="1"
|| '''Milestone''' || '''qemu targets''' || '''real hardware'''
|-
|| 3.1
||
syscalls

mm

ipc

sched

math

nptl

pty

command
||
syscalls

fs

fsx

dio

io

mm

ipc

sched

math

nptl

pty

commands
|}

The result table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets
* click the title like "blacksand" to check detail data for that target

==Current Milestone (3.1 RC2 build)==

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1464 || 1460 || n/a
|-
|| failures || || 7 || 20 || n/a
|}

==Previous Milestone==

a placeholder. Once we reach a new milestone, the data under "current milestone" will be moved here.

===3.0 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1429 || 1425 || 1429
|-
|| failures || || 5 || 19 || 9
|}

===2.7 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1397 || 1393 || 1397
|-
|| failures || || 6 || 16 || 10
|}

===2.7 M3 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1397 || 1393 || 1397
|-
|| failures || || 6 || 16 || 13
|}

===2.7 M2 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1391 || 1387 || 1391
|-
|| failures || || 8 || 18 || 10
|}

===2.7 M1 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1391 || 1387 || 1391
|-
|| failures || || 8 || 18 || 10
|}

===2.6 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1373 || 1369 || 1373
|-
|| failures || || 9 || 19 || 11
|}

===2.6 M3 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1373 || 1369 || 1373
|-
|| failures || || 10 || 21 || 14
|}

===2.6 M2 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1373 || 1369 || 1373
|-
|| failures || || 9 || 23 || 11
|}

===2.6 M1 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1373 || || 1373
|-
|| failures || || 10 || || 11
|}

===2.5 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1374 || 1370 || 1374
|-
|| failures || || 11 || 25 || 13
|}

===2.5 M3 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1374 || 1370 || 1374
|-
|| failures || || 12 || 26 || 13
|}

===2.5 M2 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1374 || 1370 || 1374
|-
|| failures || || 12 || 27 || 13
|}

===2.5 M1 RC3 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1363 || 1359 || 1363
|-
|| failures || || 12 || 25 || 13
|}

===2.5 M1 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1365 || 1358 || 1363
|-
|| failures || || 15 || 26 || 15
|}

===2.4 RC3 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1391 || 1353 || 1353 || 1353
|-
|| failures || 26 || 18 || || 29
|}

===2.4 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1391 || 1353 || 1353 || 1353
|-
|| failures || 27 || 17 || || 30
|}

===2.4 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1391 || 1353 || 1353 || 1353
|-
|| failures || 27 || 18 || 34 || 31
|}

===2.4 M3 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1391 || 1353 || 1353 || 1353
|-
|| failures || 26 || 17 || 32 || 31
|}

===2.4 M2 RC3 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1384 || 1346 || 1344 || 1346
|-
|| failures || 23 || 15 || 29 || 27
|}

===2.4 M2 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1384 || || || 1348
|-
|| failures || 24 || || || 30
|}

===2.4 M1 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1384 || || || 1348
|-
|| failures || 22 || || || 30
|}

===2.3 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1330 || 1330 || 1330
|-
|| failures || || 17 || 19 || 18
|}

===2.3 M3 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1366 || 1330 || 1330 || 1330
|-
|| failures || 15 || 18 || 19 || 18
|}

===2.3 M2 RC3 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1371 || 1335 || 1335 || 1335
|-
|| failures || 25 || 31 || 46 || 38
|}

===2.3 M1 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1371 || 1335 || 1335 || 1335
|-
|| failures || 25 || 31 || 41 || 36
|}

===2.2 RC4 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1371 || 1335 || 1335 || 1335
|-
|| failures || 21 || 31 || 41 || 35
|}

===2.2 M3 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1371 || 1335 || 1335 || 1335
|-
|| failures || 22 || 26 || 39 || 33
|}

===2.2 M2 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1371 || 1335 || 1335 || 1335
|-
|| failures || 22 || 36 || 41 || 35
|}

===2.1 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1371 || 1335 || 1335 || 1335
|-
|| failures || 19 || 35 || 38 || 42
|}

===2.0 RC3 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1326 || 1290 || 1290 || 1290
|-
|| failures || 23 || 34 || 38 || 33
|}

===2.0 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1326 || 1290 || 1290 || 1290
|-
|| failures || 23 || 34 || 38 || 33
|}

===1.9 M3 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1326 || 1290 || 1290 || 1290
|-
|| failures || 23 || 33 || 40 || 33
|}

===1.9 M2 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1326 || 1290 || 1290 || 1290
|-
|| failures || 24 || 33 || 38 || 33
|}

===1.9 M1 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1326 || 1290 || 1290 || 1290
|-
|| failures || 24 || 33 || 36 || 32
|}

===1.8 M4 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1312 || 1276 || 1276 || 1276
|-
|| failures || 24 || 32 || 40 || 32
|}

===1.8 M3 RC3 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1312 || 1276 || 1276 || 1276
|-
|| failures || 25 || 32 || 34 || 32
|}

===1.8 M1 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1311 || 1311 || 1311 || 1305
|-
|| failures || 24 || 31 || 34 || 32
|}

===1.7 M4 RC5 20141018 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1291 || 1291 || 1291 || 1286
|-
|| failures || 22 || 29 || 33 || 32
|-
|| NAB || || || ||
|}

===1.7 M4 RC4 20141011 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1291 || 1291 || 1291 || 1286
|-
|| failures || 22 || 29 || 33 || 32
|-
|| NAB || || || ||
|}

===1.7 M2 RC1 20140730 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1291 || 1291 || 1291 ||
|-
|| failures || 25 || 31 || 35 ||
|-
|| NAB || || || ||
|}

===1.7 M1 RC1 20140625 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1291 || 1291 || 1291 ||
|-
|| failures || 25 || 31 || 35 ||
|-
|| NAB || || || ||
|}

===1.6 M5 RC4 20140411 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1272 || || 1272 || 1272
|-
|| failures || 24 || || 35 || 34
|-
|| NAB || || || ||
|}

===1.6 M5 RC2 20140402 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1272 || || 1272 || 1272
|-
|| failures || 28 || || 35 || 34
|-
|| NAB || || || ||
|}

===1.6 M5 RC1 20140326 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1272 || 1272 || 1272 || 1272 || n/a
|-
|| failures || n/a || 32 || 40 || 34 || 28 || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || || || || || n/a
|}

===1.6 M4 RC1 20140312 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1272 || 1272 || 1272 || 1272 || n/a
|-
|| failures || n/a || 33 || 41 || 36 || 30 || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || || || || || n/a
|}

===1.6 M3 RC2 20140218 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1272 || 1272 || 1272 || 1272 || n/a
|-
|| failures || n/a || 34 || 44 || 36 || 30 || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || || || || || n/a
|}

===1.6 M3 RC1 20140213 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1272 || 1272 || 1272 || || n/a
|-
|| failures || n/a || 34 || 44 || 36 || || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || || || || || n/a
|}

===1.6 M2 RC1 20140114 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1265 || 1265 || 1265 || 1265 || n/a
|-
|| failures || n/a || 29 || 40 || 30 || 25 || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || || || || || n/a
|}

===1.6 M1 RC1 20131203 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || n/a || 1265 || 1265 || 1267 || n/a
|-
|| failures || n/a || n/a || 37 || 30 || 25 || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || n/a || 37 || 30 || 25 || n/a
|}

===1.5.1 RC2 20131213 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || n/a || 1256 || 1256 || || n/a
|-
|| failures || n/a || n/a || 37 || 29 || || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || || n/a
|-
|| NAB || n/a || n/a || 37 || 29 || || n/a
|}

===1.5 M5 RC6 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || n/a || 1256 || 1256 || 1258 || n/a
|-
|| failures || n/a || n/a || 40 || 28 || 21 || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || n/a || 40 || 28 || 21 || n/a
|}

===1.5 M4 RC3 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || n/a || 1256 || 1256 || 1258 || n/a
|-
|| failures || n/a || n/a || 39 || 25 || 20 || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || n/a || 39 || 25 || 20 || n/a
|}

===1.5 M4 RC2 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || n/a || 1256 || 1256 || 1259 || n/a
|-
|| failures || n/a || n/a || 40 || 25 || 20 || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || n/a || 40 || 25 || 20 || n/a
|}

===1.5 M2 RC1 20130703 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || n/a || n/a || 1256 || 1256 || n/a
|-
|| failures || n/a || n/a || n/a || 25 || 20 || n/a
|-
|| fixed || n/a || n/a || n/a || 0 || 0 || n/a
|-
|| NAB || n/a || n/a || n/a || 25 || 20 || n/a
|}

===1.4.1 RC1 20130612 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1232 || 1232 || 1232 || 1232 || n/a
|-
|| failures || n/a || 23 || 36 || 19 || 21 || n/a
|-
|| fixed || n/a || 0 || 0 || 0 || 0 || n/a
|-
|| NAB || n/a || 23 || 36 || 19 || 21 || n/a
|}

===1.5 M1 RC1 20130604 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1242 || n/a || 1242 || 1242 || n/a
|-
|| failures || n/a || 28 || n/a || 23 || 19 || n/a
|-
|| fixed || n/a || 0 || n/a || 0 || 0 || n/a
|-
|| NAB || n/a || 28 || n/a || 23 || 19 || n/a
|}

===1.3.2 20130516 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1232 || 1232 || 1232 || 1232 || n/a
|-
|| failures || n/a || 23 || 42 || 18 || 24 || n/a
|-
|| fixed || n/a || 0 || 0 || 0 || 0 || n/a
|-
|| NAB || n/a || 23 || 42 || 18 || 24 || n/a
|}

===1.4 M6 RC2 20130418 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1232 || 1232 || 1232 || 1232 || n/a
|-
|| failures || n/a || 23 || 37 || 19 || 21 || n/a
|-
|| fixed || n/a || 0 || 0 || 0 || 0 || n/a
|-
|| NAB || n/a || 23 || 37 || 19 || 21 || n/a
|}

===1.4 M5 RC3 20130327 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1238 || n/a || 1232 || 1250 || n/a
|-
|| failures || n/a || 24 || n/a || 21 || 20 || n/a
|-
|| fixed || n/a || 0 || 0 || 0 || 0 || n/a
|-
|| NAB || n/a || 24 || n/a || 21 || 20 || n/a
|}

===1.4 M5 RC2 20130327 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1232 || 1232 || 1232 || 1232 || n/a
|-
|| failures || n/a || 24 || 36 || 19 || 20 || n/a
|-
|| fixed || n/a || 0 || 0 || 0 || 0 || n/a
|-
|| NAB || n/a || 24 || 36 || 19 || 20 || n/a
|}

===1.4 M4 RC1 20130220 build===
'''environment'''
'''LTP version''': ltp-full-20120903.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result.log -C result.fail -d /opt/ltp/tmp &> result.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1232 || 1232 || 1232 || n/a || 1232
|-
|| failures || n/a || 22 || 38 || 19 || n/a || 16
|-
|| fixed || n/a || 0 || 0 || 0 || n/a || 0
|-
|| NAB || n/a || 22 || 38 || 19 || n/a || 15
|}

===1.4 M3 RC2 20130131 build===
'''environment'''
'''LTP version''': ltp-full-20120903.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result.log -C result.fail -d /opt/ltp/tmp &> result.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1232 || 1232 || 1232 || n/a || 1232
|-
|| failures || n/a || 24 || 40 || 23 || n/a || 17
|-
|| fixed || n/a || 0 || 0 || 0 || n/a || 0
|-
|| NAB || n/a || 24 || 40 || 23 || n/a || 17
|}

===1.4 M3 RC1 20130122 build===
'''environment'''
'''LTP version''': ltp-full-20120903.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result.log -C result.fail -d /opt/ltp/tmp &> result.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1232 || 1232 || 1232 || n/a || 1232
|-
|| failures || n/a || 22 || 39 || 22 || n/a || 17
|-
|| fixed || n/a || 0 || 0 || 0 || n/a || 0
|-
|| NAB || n/a || 20 || 39 || 22 || n/a || 17
|}

===1.4 M1 RC1 20121128 build===
'''environment'''
'''LTP version''': ltp-full-20120903.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result.log -C result.fail -d /opt/ltp/tmp &> result.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1232 || 1232 || 1232 || n/a || 1232
|-
|| failures || n/a || 22 || 39 || 18 || n/a || 17
|-
|| fixed || n/a || 0 || 0 || 0 || n/a || 0
|-
|| NAB || n/a || 22 || 39 || 18 || n/a || 17
|}

===1.3 M5 RC4 20121010 build===
'''environment'''
'''LTP version''': ltp-full-20120903.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result.log -C result.fail -d /opt/ltp/tmp &> result.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || 1232 || 1232 || 1232 || 1232 || n/a || 1232
|-
|| failures || 21 || 22 || 38 || 18 || n/a || 16
|-
|| fixed || 0 || 0 || 0 || 0 || n/a || 0
|-
|| NAB || 21 || 22 || 38 || 18 || n/a || 16
|}

===1.3 M5 RC3 20121003 build===
'''environment'''
'''LTP version''': ltp-full-20120903.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120926.log -C result-20120926.fail -d /opt/ltp/tmp &> result-20120926.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || 1227 || 1232 || 1232 || 1232 || n/a || 1229
|-
|| failures || 26 || 22 || 39 || 18 || n/a || 17
|-
|| fixed || 0 || 0 || 0 || 0 || n/a || 0
|-
|| NAB || 26 || 21 || 39 || 18 || n/a || 17
|}

===1.3 M5 RC2 20120926 build===
'''environment'''
'''LTP version''': ltp-full-20120903.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120926.log -C result-20120926.fail -d /opt/ltp/tmp &> result-20120926.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || || 1232 || 1232 || 1232 || ||
|-
|| failures || || 22 || 38 || 18 || ||
|-
|| fixed || || 0 || 0 || 0 || ||
|-
|| NAB || || 22 || 38 || 18 || ||
|}

===1.3 M4 RC3 20120916 build===
'''environment'''
'''LTP version''': ltp-full-20120614.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120916.log -C result-20120916.fail -d /opt/ltp/tmp &> result-20120916.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || 1227 || 1229 || 1229 || 1229 || || 1230
|-
|| failures || 7 || 23 || 40 || 20 || || 15
|-
|| fixed || 0 || 0 || 0 || 0 || || 0
|-
|| NAB || 7 || 23 || 40 || 20 || || 15
|}

===1.3 M3 RC2 20120814 build===
'''environment'''
'''LTP version''': ltp-full-20120614.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120814.log -C result-20120814.fail -d /opt/ltp/tmp &> result-20120814.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || || 1229 || 1229 || 1229 || || 1230
|-
|| failures || || 23 || 33 || 21 || || 17
|-
|| fixed || || 0 || 0 || 0 || || 0
|-
|| NAB || || 23 || 33 || 21 || || 17
|}

===1.3 20120801 build===
'''environment'''
'''LTP version''': ltp-full-20120614.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120801.log -C result-20120801.fail -d /opt/ltp/tmp &> result-20120801.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || || 1229 || 1229 || 1229 ||1230 || 1235
|-
|| failures || || 24 || 32 || 24 || 17 || 17
|-
|| fixed || || 2 || 1 || 2 || 1 || 0
|-
|| NAB || || 23 || 26 || 24 || 17 || 17
|}

===1.3 M2 RC1 20120712 build===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120712.log -C result-20120712.fail -d /opt/ltp/tmp &> result-20120712.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || || 1228 || 1228 || n/a || 1229
|-
|| failures || || 26 || 32 || || 18
|-
|| fixed || || 8 || 8 || || 0
|-
|| NAB || || 21 || 24 || || 15
|}

===1.1.2 20120630 build===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120613.log -C result-20120613.fail -d /opt/ltp/tmp &> result-20120613.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || || 1227 || 1228 || 1228 || 1229
|-
|| failures || || 41 || 42 || 29 || 36
|-
|| fixed || || 0 || 0 || 0 || 0
|-
|| NAB || || 36 || 32 || 27 || 24
|}

===1.2.1 20120629 build===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120613.log -C result-20120613.fail -d /opt/ltp/tmp &> result-20120613.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || || 1228 || 1228 || 1228 || 1229
|-
|| failures || || 23 || 30 || 22 || 19
|-
|| fixed || || 0 || 0 || 0 || 0
|-
|| NAB || || 21 || 24 || 20 || 16
|}

===1.3 M1 RC1 20120613 build===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120613.log -C result-20120613.fail -d /opt/ltp/tmp &> result-20120613.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1229 || 1228 || 1227 || 1228 || 1227
|-
|| failures || 16 || 33 || 41 || 30 || 27
|-
|| fixed || 1 || 0 || 0 || 0 || 0
|-
|| NAB || 15 || 29 || 32 || 27 || 24
|}

===1.3 20120606 build===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120606.log -C result-20120606.fail -d /opt/ltp/tmp &> result-20120606.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1229 || 1228 || 1227 || 1228 || 1227
|-
|| failures || 15 || 32 || 39 || 29 || 18
|-
|| fixed || 0 || 0 || 0 || 0 || 0
|-
|| NAB || 15 || 29 || 32 || 27 || 17
|}

===1.2 Denzil RC5===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120423.log -C result-20120423.fail -d /opt/ltp/tmp &> result-20120423.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1229 || 1228 || 1228 || 1228 || 1227
|-
|| failures || 21 || 24 || 30 || 21 || 18
|-
|| fixed || 0 || 0 || 0 || 0 || 0
|-
|| NAB || 16 || 21 || 24 || 19 || 17
|}

===1.2 Denzil RC4===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120418.log -C result-20120418.fail -d /opt/ltp/tmp &> result-20120418.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1229 || 1228 || 1228 || 1228 || 1227
|-
|| failures || 21 || 24 || 30 || 23 || 18
|-
|| fixed || 0 || 0 || 0 || 0 || 0
|-
|| NAB || 16 || 21 || 24 || 21 || 17
|}

===1.2 M4 RC3===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120412.log -C result-20120412.fail -d /opt/ltp/tmp &> result-20120412.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1229 || 1228 || n/a || 1228 || 1227
|-
|| failures || 21 || 24 || n/a || 21 || 18
|-
|| fixed || 0 || 2 || n/a || 2 || 0
|-
|| NAB || 16 || 21 || n/a || 19 || 17
|}

===1.2 M4 RC2===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120405.log -C result-20120405.fail -d /opt/ltp/tmp &> result-20120405.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1229 || 1206 || 1206 || 1206 || 1209
|-
|| failures || 21 || 22 || 28 || 20 || 17
|-
|| fixed || 0 || 0 || 0 || 0 || 1
|-
|| NAB || 16 || 20 || 21 || 19 || 16
|}
===1.2 M4 RC1===
'''environment'''
'''LTP version''': ltp-full-20120104.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120328.log -C result-20120328.fail -d /opt/ltp/tmp &> result-20120328.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1208 || 1206 || 1206 || 1206 || 1206
|-
|| failures || 16 || 22 || 28 || 20 || 17
|-
|| fixed || 0 || 0 || 1 || 0 || 0
|-
|| NAB || 16 || 20 || 21 || 19 || 16
|}

===1.2 M3 RC1===
'''environment'''
'''LTP version''': ltp-full-20120104.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120229.log -C result-20120229.fail -d /opt/ltp/tmp &> result-20120229.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1208 || 1206 || 1206 || 1206 || 1026
|-
|| failures || 16 || 22 || 29 || 20 || 17
|-
|| fixed || 11 || 11 || 10 || 11 || 11
|-
|| NAB || 13 || 20 || 21 || 19 || 16
|}

===1.1.1===
'''environment'''
'''LTP version''': ltp-full-20110606.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120216.log -C result-20120216.fail -d /opt/ltp/tmp &> result-20120216.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1206 || 1206 || 1206 || 1203 || 1203
|-
|| failures || 36 || 41 || 43 || 41 || 36
|-
|| fixed || 0 || 0 || 0 || 0 || 0
|-
|| NAB || 22 || 36 || 36 || 39 || 24
|}
===1.2 M2 RC1===
'''environment'''
'''LTP version''': ltp-full-20110915.bz2

'''profile''': poky-image-sato-sdk

'''run command''': ./runltp -p -l result-20120111.log -C result-20120111.fail -d /opt/ltp/tmp &> result-20120111.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1206 || 1206 || 1207 || 1204 || 1206
|-
|| failures || 27 || 30 || 37 || 31 || 26
|-
|| fixed || 13 || 14 || 14 || 9 || 12
|-
|| NAB || 24 || 27 || 33|| 28 || 22
|}

===1.2 M1 RC2===
'''environment'''
'''LTP version''': ltp-full-20110915.bz2

'''profile''': poky-image-sato-sdk

'''run command''': ./runltp -p -l result-20111213.log -C result-20111213.fail -d /opt/ltp/tmp &> result-20111213.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemuarm" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1102 || 1106 || 1102 ||1205 || 1206 || 1207 || 1204 ||1205
|-
|| failures || 34 || 35 || 33 ||36 || 39 || 40 || 38 ||34
|-
|| fixed || 0 || 0 || 0 || 1 || 0 || 0 || 0 ||1
|-
|| NAB || 33 || 34 || 31 ||36 || 34 || 32|| 36 || 34
|}

===1.0.2===
'''environment'''
'''LTP version''': ltp-full-20110606.bz2

'''profile''': poky-image-sato-sdk

'''run command''': ./runltp -p -l result-20111201.log -C result-20111201.fail -d /opt/ltp/tmp &> result-20111201.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemuarm" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1104 || 1105 || 1104 || || 1206 || 1206 || 1206 ||
|-
|| failures || 35 || 35 || 35 || || 36 || 137 || 36 ||
|-
|| fixed || 0 || 0 || 0 || || 0 || 0 || 0 ||
|-
|| NAB || '''34''' || '''35''' || '''35''' || || '''36''' || '''37''' || '''36''' ||
|}

===1.1 M4 RC4===
'''environment'''
'''LTP version''': ltp-full-20110606.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-M4-20110914.log -C result-M4-20110914.fail -d /opt/ltp/tmp &> result-M4-20110914.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemuarm" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1104 || 1105 || 1104 || 1208 || 1206 || 1206 || 1206 || 1208
|-
|| failures || 38 || 39 || 37 || 36 || 41 || 43 || 39 || 35
|-
|| fixed || 0 || 0 || 0 || 0 || 0 || 0 || 0 || 0
|-
|| NAB || '''37''' || '''38''' || '''36''' || '''36''' || '''36''' || '''37''' || '''37''' || '''35'''
|}

===1.1 M4 RC3===
'''environment'''
'''LTP version''': ltp-full-20110606.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-M4-20110914.log -C result-M4-20110914.fail -d /opt/ltp/tmp &> result-M4-20110914.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemuarm" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1104 || 1105 || 1104 || 1208 || 1206 || 1206 || 1206 || 1203
|-
|| failures || 37 || 38 || 37 || 37 || 41 || 44 || 39 || 37
|-
|| fixed || 1 || 1 || 0 || 0 || 2 || 16 || 0 || 0
|-
|| NAB || '''37''' || '''38''' || '''36''' || '''37''' || '''36''' || '''37''' || '''37''' || '''37'''
|}

===1.1 M4 RC2===
'''environment'''
'''LTP version''': ltp-full-20110606.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-M4-20110914.log -C result-M4-20110914.fail -d /opt/ltp/tmp &> result-M4-20110914.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemuarm" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1104 || 1105 || 1104 || 1180 || 1206 || 1206 || 1206 || 1180
|-
|| failures || 38 || 39 || 37 || 26 || 43 || 59 || 39 || 26
|-
|| fixed || 0 || 0 || 0 || 5 || 0 || 0 || 6 || 1
|-
|| NAB || '''37''' || '''38''' || '''36''' || '''26''' || '''38''' || '''43''' || '''37''' || '''26'''
|}

===1.1 M3===
'''environment'''
'''LTP version''': ltp-full-20110606.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-M3-20110806.log -C result-M3-20110806.fail -d /opt/ltp/tmp &> result-M3-20110806.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemuarm" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1104 || 1105 || 1104 || 1180 || 1207 || 1206 || 1206 || 1180
|-
|| failures || 35 || 37 || 36 || 28 || 41 || 57 || 42 || 27
|-
|| fixed || 0 || 3 || 3 || 0 || 3 || 104 || 0 || 9
|-
|| NAB || '''34''' || '''36''' || '''32''' || '''23''' || '''35''' || '''51''' || '''36''' || '''27'''
|}

===1.1 M2===
'''environment'''
'''LTP version''': ltp-full-20101031.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-M2-20110711.log -C result-M2-20110711.fail -d /opt/ltp/tmp &> result-M2-20110711.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemuarm" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1078 || 1078 || 1080 || 1182 || 1180 || 1179 || 1180 || 1180
|-
|| failures || 25 || 29 || 26 || 28 || 33 || 146 || 31 || 30
|-
|| fixed || 1 || 0 || 0 || 2 || 1 || 2 || 1 || 3
|-
|| NAB || '''23''' || '''25''' || '''23''' || '''23''' || '''24''' || '''23''' || '''24''' || '''24'''
|}

===1.1 M1===
'''environment'''
'''LTP version''': ltp-full-20101031.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-M1-20110528.log -C result-M1-20110528.fail -d /opt/ltp/tmp &> result-M2-20110528.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemuarm" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1078 || 1078 || 1078 || 1182 || 1180 || 1179 || 1180 || 1180
|-
|| failures || 26 || 29 || 26 || 30 || 34 || 146 || 32 || 33
|-
|| fixed || 0 || 0 || 0 || 0 || 0 || 0 || 0 || 0
|-
|| NAB || '''23''' || '''25''' || '''23''' || '''4''' || '''25''' || '''23''' || '''25''' || 0
|-
|| LTP || 0 || 0 || 0 || 0 || 0 || 0 || 0 || 0
|-
|| Duplicated || 0 || 0 || 0 || '''29''' || '''5''' || '''5''' || '''5''' || '''35'''
|-
|| pending || 0 || '''3''' || '''3''' || '''3''' || '''3''' || '''3''' || 0 || 0
|}

===1.0 M4===
'''environment'''
'''LTP version''': ltp-full-20101031.bz2

'''profile''': poky-image-sdk

'''run command''': ../runltp -p -l result-M4-20110318.log -C result-M4-20110318.fail -d /opt/tmp

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemux86" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemux86-ltp|Qemux86]]''' || '''[[qemux86_64-ltp|Qemux86_64]]''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[netbook-ltp|netbook]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[Jasperforest-ltp|Jasperforest]] (lsb-sdk)''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1072 || n/a || 1071 || 1071 || 1081 || n/a || n/a || 1174 || 1182 || 1198 ||
|-
|| failures || 34 || 32 || 34 || 37 || 37 || 33 || 29 || 35 || 145 (*) || 20 ||
|-
|| '''audit''' || '''100%''' || '''100%''' || '''100%''' || '''100%''' || '''100%''' || '''100%''' ||'''100%''' || '''100%''' ||''' 0(0%)''' || '''0(0%)''' ||
|-
|| fixed || '''6''' || 0 || 0 || '''1''' || 0 || 0 || 0 || 0 || 0 || 0 ||
|-
|| NAB || '''26''' || '''1''' || '''1''' || '''4''' || '''1''' || '''2''' || '''1''' || 0 || 0 || 0 ||
|-
|| LTP || '''2''' || '''2''' || 0 || 0 || '''1''' || 0 || 0 || 0 || 0 || ||
|-
|| Duplicated || 0 || '''29''' || '''33''' || '''29''' || '''29''' || '''31''' || '''28''' || '''35''' || 0 || 13 ||
|-
|| pending || 0 || 0 || 0 || '''3''' || 0 || 0 || 0 || 0 || 0 || ||
|-
|| '''similarity''' || '''100%''' || '''90%''' || '''88%''' || '''78%''' || '''78%''' || '''90%''' || '''96%''' || '''85%''' || '''19%''' || ||
|}
* on routerstation kernel is not configured correctly. Lots of new failures
are related to IPC, which may come from lacking of some kernel options. This
has been verified with newer 2.6.37 kernel recently, that only ~60 failures
remaining. So the analysis is skipped for it in this cycle.

===1.0 M2===
'''environment'''
'''LTP version''': ltp-full-20101031.bz2

'''profile''': poky-image-sdk

'''run command''': ../runltp -p -q -l result-M2-20101218.log -C result-M2-20101218.fail -d /opt/tmp

Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemux86" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemux86-ltp|Qemux86]]''' || '''[[qemux86_64-ltp|Qemux86_64]]''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[netbook-ltp|netbook]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]'''
|-
|| total || 1072 || n/a || 1071 || 1071 || 1081 || n/a || n/a || 1174 || 1182
|-
|| failures || 34 || 32 || 34 || 37 || 37 || 33 || 29 || 35 || 145 (*)
|-
|| '''audit''' || '''100%''' || '''100%''' || '''100%''' || '''100%''' || '''100%''' || '''100%''' ||'''100%''' || '''100%''' ||''' 0(0%)'''
|-
|| fixed || '''6''' || 0 || 0 || '''1''' || 0 || 0 || 0 || 0 || 0
|-
|| NAB || '''26''' || '''1''' || '''1''' || '''4''' || '''1''' || '''2''' || '''1''' || 0 || 0
|-
|| LTP || '''2''' || '''2''' || 0 || 0 || '''1''' || 0 || 0 || 0 || 0
|-
|| Duplicated || 0 || '''29''' || '''33''' || '''29''' || '''29''' || '''31''' || '''28''' || '''35''' || 0
|-
|| pending || 0 || 0 || 0 || '''3''' || 0 || 0 || 0 || 0 || 0
|-
|| '''similarity''' || '''100%''' || '''90%''' || '''88%''' || '''78%''' || '''78%''' || '''90%''' || '''96%''' || '''85%''' || '''19%'''
|}
* on routerstation kernel is not configured correctly. Lots of new failures
are related to IPC, which may come from lacking of some kernel options. This
has been verified with newer 2.6.37 kernel recently, that only ~60 failures
remaining. So the analysis is skipped for it in this cycle.

LTP result

2020-04-10T01:10:14Z

Yzhao: /* Overall trend */

==Introduction==
Linux Test Project (LTP) is an open source project with a goal to deliver test suites to the open source community that validate the reliability, robustness, and stability of Linux. (http://ltp.sourceforge.net)

Unlike typical desktop/server distributions, embedded linux distribution is highly customized for a specific purpose. It's not unusual to observe more failures in Yocto than in a typical desktop Linux distro like Ubuntu, etc. So the major purposes of this work are:
* to understand the reasons for existing LTP failures. If the cause is from a specific package itself, go to fix it. Or else if the error simply come from the fact that a given package doesn't exist in current profile, add the explanation here
* to track LTP test results cross Yocto releases, and ensure a declining error number for same profile
* to be the reference if Yocto users want to get a base picture

==Overall trend==

Overall trend tends to track the change of LTP test results along with Yocto's progress. Previous data in 0.9 is not complete and not consistent configured on all targets. So we start from 1.0-M2 as the starting point.

In below table we list total LTP failures for each architectures in each milestone: (now this wiki doesn't allow upload files. So for detail logs please refer to earlier bug link)

{|border="1"
|| '''Milestone''' || '''sugarbay''' || '''qemux86''' || '''qemu-x86_64''' || '''qemuppc''' || '''qemuarm''' || '''qemumips''' || '''atom-pc''' || '''blacksand''' || '''beagleboard''' || '''routerstation''' || '''mpc8315e-rdb''' || '''huronriver''' || '''edgerouter''' || '''beaglebone''' || '''genericx86-64'''
|-
|| 3.1 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 20 || 7 ||
|-
|| 3.0 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 9 || n/a || 19 || 5 ||
|-
|| 2.7 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 10 || n/a || 16 || 6 ||
|-
|| 2.7 M3 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 13 || n/a || 16 || 6 ||
|-
|| 2.7 M2 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 10 || n/a || 18 || 8 ||
|-
|| 2.7 M1 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 10 || n/a || 18 || 8 ||
|-
|| 2.6 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 11 || n/a || 19 || 9 ||
|-
|| 2.6 M3 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 13 || n/a || 21 || 10 ||
|-
|| 2.6 M2 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 11 || n/a || 23 || 9 ||
|-
|| 2.6 M1 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 11 || n/a || n/a || 10 ||
|-
|| 2.5 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 13 || n/a || 25 || 11 ||
|-
|| 2.5 M3 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 13 || n/a || 26 || 12 ||
|-
|| 2.5 M2 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 13 || n/a || 27 || 12 ||
|-
|| 2.5 M1 RC3 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 13 || n/a || 25 || 12 ||
|-
|| 2.5 M1 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 15 || n/a || 26 || 15 ||
|-
|| 2.4 RC3 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 29 || n/a || || 18 || 26
|-
|| 2.4 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 30 || n/a || || 17 || 27
|-
|| 2.4 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 31 || n/a || 34 || 18 || 27
|-
|| 2.4 M3 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 31 || n/a || 32 || 17 || 26
|-
|| 2.4 M2 RC3 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 27 || n/a || 29 || 15 || 23
|-
|| 2.4 M2 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 30 || n/a || || || 24
|-
|| 2.4 M1 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 30 || n/a || || || 22
|-
|| 2.3 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 18 || n/a || 19 || 17 ||
|-
|| 2.3 M3 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 18 || n/a || 19 || 18 || 15
|-
|| 2.3 M2 RC3 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 38 || n/a || 46 || 31 || 25
|-
|| 2.3 M1 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 36 || n/a || 41 || 31 || 25
|-
|| 2.2 RC4 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 35 || n/a || 41 || 31 || 21
|-
|| 2.2 M3 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 33 || n/a || 39 || 26 || 22
|-
|| 2.2 M2 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 35 || n/a || 41 || 36 || 22
|-
|| 2.1 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 42 || n/a || 38 || 35 || 19
|-
|| 2.0 RC3 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 33 || n/a || 38 || 34 || 23
|-
|| 2.0 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 33 || n/a || 38 || 34 || 23
|-
|| 1.9 M3 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 33 || n/a || 40 || 33 || 23
|-
|| 1.9 M2 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 33 || n/a || 38 || 33 || 24
|-
|| 1.9 M1 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 32 || n/a || 36 || 33 || 24
|-
|| 1.8 M4 RC2 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 32 || n/a || 40 || 32 || 24
|-
|| 1.8 M3 RC3 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 32 || n/a || 34 || 32 || 25
|-
|| 1.8 M1 RC1 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 32 || n/a || 34 || 31 || 24
|-
|| 1.7 M4 RC5 20141018 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 32 || n/a || 33 || 29 || 22
|-
|| 1.7 M4 RC4 20141011 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 32 || n/a || 33 || 29 || 22
|-
|| 1.7 M2 RC1 20140730 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || || n/a || 35 || 31 || 25
|-
|| 1.7 M1 RC1 20140625 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || || n/a || 35 || 31 || 25
|-
|| 1.5.2 RC3 20140428 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 32 || 37 || 26 || n/a || n/a || n/a || 16
|-
|| 1.6 M5 RC4 20140411 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 34 || n/a || 35 || || 24
|-
|| 1.6 M5 RC2 20140402 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 34 || n/a || 35 || || 28
|-
|| 1.6 M5 RC1 20140326 build || 28 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 32 || 40 || 34 || n/a
|-
|| 1.6 M4 RC1 20140312 build || 30 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 33 || 41 || 36 || n/a
|-
|| 1.6 M3 RC2 20140218 build || 30 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 34 || 44 || 36 || n/a
|-
|| 1.6 M3 RC1 20140213 build || || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 34 || 44 || 36 || n/a
|-
|| 1.6 M2 RC1 20140114 build || 25 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 29 || 40 || 30 || n/a
|-
|| 1.5.1 RC2 20131203 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 37 || 29 || n/a
|-
|| 1.6 M1 RC1 20131203 build || 25 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 37 || 30 || n/a
|-
|| 1.5 M5 RC6 build || 21 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 40 || 28 || n/a
|-
|| 1.5 M4 RC3 build || 20 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 39 || 25 || n/a
|-
|| 1.5 M4 RC2 build || 20 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 40 || 25 || n/a
|-
|| 1.4.2 RC1 build || 21 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 25 || 35 || 19 || n/a
|-
|| 1.5 M3 RC1 20130731 build || 20 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 37 || 26 || n/a
|-
|| 1.5 M2 RC1 20130703 build || 20 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 25 || n/a
|-
|| 1.4.1 RC1 20130612 build || 21 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 23 || 36 || 19 || n/a
|-
|| 1.5 M1 RC1 20130604 build || 19 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 28 || n/a || 23 || n/a
|-
|| 1.3.2 20130516 build || 24 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 23 || 42 || 18 || n/a
|-
|| 1.4 M6 RC2 20130418 build || 21 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 23 || 37 || 19 || n/a
|-
|| 1.4 M5 RC3 20130403 build || 20 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 24 || n/a || 21 || n/a
|-
|| 1.4 M5 RC2 20130327 build || 20 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 24 || 36 || 19 || n/a
|-
|| 1.4 M4 RC1 20130220 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 22 || 38 || 19 || 16
|-
|| 1.4 M3 RC2 20130131 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 24 || 40 || 23 || 17
|-
|| 1.4 M3 RC1 20130122 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 22 || 39 || 22 || 17
|-
|| 1.2.2 20130105 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 21 || 38 || 21 || 17
|-
|| 1.2.2 20121206 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 21 || 38 || 21 || 17
|-
|| 1.4 M1 RC1 20121128 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 22 || 39 || 18 || 17
|-
|| 1.2.2 20121018 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 23 || 40 || 21 || 17
|-
|| 1.3 M5 RC4 20121010 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 21 || 22 || 38 || 18 || 16
|-
|| 1.3 M5 RC3 20121003 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 27 || 22 || 39 || 18 || 17
|-
|| 1.3 M5 RC2 20120926 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 24 || 22 || 38 || 18 || 27
|-
|| 1.3 M4 RC3 20120916 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 13 || 23 || 40 || 20 || 15
|-
|| 1.3 M3 RC2 20120814 build || n/a || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 23 || 33 || 21 || 17
|-
|| 1.3 20120801 build || 17 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 24 || 32 || 24 || 17
|-
|| 1.3 M2 RC1 20120712 build ||18 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 26 || 32 || n/a || n/a
|-
|| 1.1.2 20120630 build || 36 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 41 || 42 || 29 || n/a
|-
|| 1.2.1 20120629 build || 19 || n/a || n/a || n/a || n/a || n/a || n/a || n/a || 23 || 30 || 22 || n/a
|-
|| 1.3 20120613 build || 27 || n/a || n/a || n/a || n/a || n/a || n/a || 16 || 33 || 41 || 30 || n/a
|-
|| 1.3 20120606 build || || n/a || n/a || n/a || n/a || n/a || n/a || 15 || 32 || 39 || 29 || n/a
|-
|| Denzil (1.2 RC5) || 18 || n/a || n/a || n/a || n/a || n/a || n/a || 21 || 24 || 30 || 21 || n/a
|-
|| Denzil (1.2 RC4) || 18 || n/a || n/a || n/a || n/a || n/a || n/a || 21 || 24 || 30 || 23 || n/a
|-
|| 1.2-M4 RC3 || 18 || n/a || n/a || n/a || n/a || n/a || n/a || 21 || 24 || n/a || 21 || n/a
|-
|| 1.2-M4 RC2 || 17 || n/a || n/a || n/a || n/a || n/a || n/a || 21 || 22 || 28 || 20 || n/a
|-
|| 1.2-M4 RC1 || 17 || n/a || n/a || n/a || n/a || n/a || n/a || 16 || 22 || 28 || 20 || n/a
|-
|| 1.2-M3 RC1 || 17 || n/a || n/a || n/a || n/a || n/a || n/a || 16 || 22 || 29 || 20 || n/a
|-
|| 1.1.1 || 36 || n/a || n/a || n/a || n/a || n/a || n/a || 36 || 41 || 43 || 41 || n/a
|-
|| 1.2-M2 RC1 || 26 || n/a || n/a || n/a || n/a || n/a || n/a || 27 || 30 || 37 || 31 || n/a
|-
|| 1.2-M1 RC2 || 34 || n/a || n/a || 34 || 35 || 33 || n/a || 36 || 39 || 40 || 38 || n/a
|-
|| 1.0.2 || || n/a || n/a || 35 || 35 || 35 || n/a || || 36 || 137 (*) || 36 || n/a
|-
|| 1.1-M4 RC4 || 35 || n/a || n/a || 38 || 39 || 37 || n/a || 36 || 41 || 43 || 39 || n/a
|-
|| 1.1-M4 RC3 || 37 || n/a || n/a || 37 || 38 || 37 || n/a || 37 || 41 || 44 || 39 || n/a
|-
|| 1.1-M4 RC2 || 26 || n/a || n/a || 38 || 39 || 37 || n/a || 26 || 43 || 59 || 39 || n/a
|-
|| 1.1-M3 || 27 || n/a || n/a || 35 || 37 || 36 || n/a || 28 || 41 || 57 || 42 || n/a
|-
|| 1.1-M2 || 30 || n/a || n/a || 25 || 29 || 26 || n/a || 28 || 33 || 146 (*) || 31 || n/a
|-
|| 1.1-M1 || 33 || n/a || n/a || 26 || 29 || 26 || n/a || 30 || 34 || 146 (*) || 32 || n/a
|-
|| 1.0-M2 || || 34 || 32 || 34 || 37 || 37 || 33 || 29 || 35 || 145 (*) || || n/a
|}
*: routerstation has kernel config issues. See later for detail.

general tips:
* Yocto links /tmp to /var/volatiles/tmp which is dynamically created at each boot. This causes one issue to LTP test. /var is normally not writable to non-root users, while LTP does run some test cases under non-root accounts. This causes considerable failures (~60 in qemux86) when creating temporary contents under /tmp. The workaround to this issue is to use "-d newtmpdir" when running LTP, where newtmpdir is created with full write permissions to all users.
* There's a puzzle which profile should be chosen as the test target. Now SDK is chosen because same image can work on both qemu and real hardware. LSB profile provides better result which is more desktop like but now this profile doesn't run on real hardware and lack of some development packages like gcc. For now we just keep this choice, and introduce a Not-A-Bug type to mark failures which are caused simply because related packages are missing
** It's better to use a tmp dir from the 2nd disk which contains ltp test suite. This way it avoids some noisy disk space limitation errors
* suggest to use "-m 512" as some tests are memory stress
* suggest to disable hackbench from runtest/sched, which is not suitable to run in emulator, and simply hang
* don't use "-q" option when running ltp, which hides many useful output info

==Test Configuration and Environment==
'''LTP version''': ltp-20200120

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result.log -C result.fail -d /opt/ltp/tmp &> result.fulllog

The below table includes which LTP categories are included in the measurement:

{|border="1"
|| '''Milestone''' || '''qemu targets''' || '''real hardware'''
|-
|| 3.1
||
syscalls

mm

ipc

sched

math

nptl

pty

command
||
syscalls

fs

fsx

dio

io

mm

ipc

sched

math

nptl

pty

commands
|}

The result table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets
* click the title like "blacksand" to check detail data for that target

==Current Milestone (3.1 RC2 build)==

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1464 || || n/a
|-
|| failures || || 7 || || n/a
|}

==Previous Milestone==

a placeholder. Once we reach a new milestone, the data under "current milestone" will be moved here.

===3.0 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1429 || 1425 || 1429
|-
|| failures || || 5 || 19 || 9
|}

===2.7 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1397 || 1393 || 1397
|-
|| failures || || 6 || 16 || 10
|}

===2.7 M3 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1397 || 1393 || 1397
|-
|| failures || || 6 || 16 || 13
|}

===2.7 M2 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1391 || 1387 || 1391
|-
|| failures || || 8 || 18 || 10
|}

===2.7 M1 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1391 || 1387 || 1391
|-
|| failures || || 8 || 18 || 10
|}

===2.6 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1373 || 1369 || 1373
|-
|| failures || || 9 || 19 || 11
|}

===2.6 M3 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1373 || 1369 || 1373
|-
|| failures || || 10 || 21 || 14
|}

===2.6 M2 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1373 || 1369 || 1373
|-
|| failures || || 9 || 23 || 11
|}

===2.6 M1 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1373 || || 1373
|-
|| failures || || 10 || || 11
|}

===2.5 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1374 || 1370 || 1374
|-
|| failures || || 11 || 25 || 13
|}

===2.5 M3 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1374 || 1370 || 1374
|-
|| failures || || 12 || 26 || 13
|}

===2.5 M2 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1374 || 1370 || 1374
|-
|| failures || || 12 || 27 || 13
|}

===2.5 M1 RC3 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1363 || 1359 || 1363
|-
|| failures || || 12 || 25 || 13
|}

===2.5 M1 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1365 || 1358 || 1363
|-
|| failures || || 15 || 26 || 15
|}

===2.4 RC3 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1391 || 1353 || 1353 || 1353
|-
|| failures || 26 || 18 || || 29
|}

===2.4 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1391 || 1353 || 1353 || 1353
|-
|| failures || 27 || 17 || || 30
|}

===2.4 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1391 || 1353 || 1353 || 1353
|-
|| failures || 27 || 18 || 34 || 31
|}

===2.4 M3 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1391 || 1353 || 1353 || 1353
|-
|| failures || 26 || 17 || 32 || 31
|}

===2.4 M2 RC3 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1384 || 1346 || 1344 || 1346
|-
|| failures || 23 || 15 || 29 || 27
|}

===2.4 M2 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1384 || || || 1348
|-
|| failures || 24 || || || 30
|}

===2.4 M1 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1384 || || || 1348
|-
|| failures || 22 || || || 30
|}

===2.3 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || || 1330 || 1330 || 1330
|-
|| failures || || 17 || 19 || 18
|}

===2.3 M3 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1366 || 1330 || 1330 || 1330
|-
|| failures || 15 || 18 || 19 || 18
|}

===2.3 M2 RC3 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1371 || 1335 || 1335 || 1335
|-
|| failures || 25 || 31 || 46 || 38
|}

===2.3 M1 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1371 || 1335 || 1335 || 1335
|-
|| failures || 25 || 31 || 41 || 36
|}

===2.2 RC4 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1371 || 1335 || 1335 || 1335
|-
|| failures || 21 || 31 || 41 || 35
|}

===2.2 M3 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1371 || 1335 || 1335 || 1335
|-
|| failures || 22 || 26 || 39 || 33
|}

===2.2 M2 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1371 || 1335 || 1335 || 1335
|-
|| failures || 22 || 36 || 41 || 35
|}

===2.1 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1371 || 1335 || 1335 || 1335
|-
|| failures || 19 || 35 || 38 || 42
|}

===2.0 RC3 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1326 || 1290 || 1290 || 1290
|-
|| failures || 23 || 34 || 38 || 33
|}

===2.0 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1326 || 1290 || 1290 || 1290
|-
|| failures || 23 || 34 || 38 || 33
|}

===1.9 M3 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1326 || 1290 || 1290 || 1290
|-
|| failures || 23 || 33 || 40 || 33
|}

===1.9 M2 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1326 || 1290 || 1290 || 1290
|-
|| failures || 24 || 33 || 38 || 33
|}

===1.9 M1 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1326 || 1290 || 1290 || 1290
|-
|| failures || 24 || 33 || 36 || 32
|}

===1.8 M4 RC2 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1312 || 1276 || 1276 || 1276
|-
|| failures || 24 || 32 || 40 || 32
|}

===1.8 M3 RC3 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1312 || 1276 || 1276 || 1276
|-
|| failures || 25 || 32 || 34 || 32
|}

===1.8 M1 RC1 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1311 || 1311 || 1311 || 1305
|-
|| failures || 24 || 31 || 34 || 32
|}

===1.7 M4 RC5 20141018 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1291 || 1291 || 1291 || 1286
|-
|| failures || 22 || 29 || 33 || 32
|-
|| NAB || || || ||
|}

===1.7 M4 RC4 20141011 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1291 || 1291 || 1291 || 1286
|-
|| failures || 22 || 29 || 33 || 32
|-
|| NAB || || || ||
|}

===1.7 M2 RC1 20140730 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1291 || 1291 || 1291 ||
|-
|| failures || 25 || 31 || 35 ||
|-
|| NAB || || || ||
|}

===1.7 M1 RC1 20140625 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1291 || 1291 || 1291 ||
|-
|| failures || 25 || 31 || 35 ||
|-
|| NAB || || || ||
|}

===1.6 M5 RC4 20140411 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1272 || || 1272 || 1272
|-
|| failures || 24 || || 35 || 34
|-
|| NAB || || || ||
|}

===1.6 M5 RC2 20140402 build===

{|border="1"
|| '''Status''' || '''[[genericx86-64-ltp|genericx86-64]]''' || '''[[beaglebone-ltp|beaglebone]]''' || '''[[edgerouter-ltp|edgerouter]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1272 || || 1272 || 1272
|-
|| failures || 28 || || 35 || 34
|-
|| NAB || || || ||
|}

===1.6 M5 RC1 20140326 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1272 || 1272 || 1272 || 1272 || n/a
|-
|| failures || n/a || 32 || 40 || 34 || 28 || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || || || || || n/a
|}

===1.6 M4 RC1 20140312 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1272 || 1272 || 1272 || 1272 || n/a
|-
|| failures || n/a || 33 || 41 || 36 || 30 || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || || || || || n/a
|}

===1.6 M3 RC2 20140218 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1272 || 1272 || 1272 || 1272 || n/a
|-
|| failures || n/a || 34 || 44 || 36 || 30 || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || || || || || n/a
|}

===1.6 M3 RC1 20140213 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1272 || 1272 || 1272 || || n/a
|-
|| failures || n/a || 34 || 44 || 36 || || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || || || || || n/a
|}

===1.6 M2 RC1 20140114 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1265 || 1265 || 1265 || 1265 || n/a
|-
|| failures || n/a || 29 || 40 || 30 || 25 || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || || || || || n/a
|}

===1.6 M1 RC1 20131203 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || n/a || 1265 || 1265 || 1267 || n/a
|-
|| failures || n/a || n/a || 37 || 30 || 25 || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || n/a || 37 || 30 || 25 || n/a
|}

===1.5.1 RC2 20131213 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || n/a || 1256 || 1256 || || n/a
|-
|| failures || n/a || n/a || 37 || 29 || || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || || n/a
|-
|| NAB || n/a || n/a || 37 || 29 || || n/a
|}

===1.5 M5 RC6 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || n/a || 1256 || 1256 || 1258 || n/a
|-
|| failures || n/a || n/a || 40 || 28 || 21 || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || n/a || 40 || 28 || 21 || n/a
|}

===1.5 M4 RC3 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || n/a || 1256 || 1256 || 1258 || n/a
|-
|| failures || n/a || n/a || 39 || 25 || 20 || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || n/a || 39 || 25 || 20 || n/a
|}

===1.5 M4 RC2 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || n/a || 1256 || 1256 || 1259 || n/a
|-
|| failures || n/a || n/a || 40 || 25 || 20 || n/a
|-
|| fixed || n/a || n/a || n/a || n/a || n/a || n/a
|-
|| NAB || n/a || n/a || 40 || 25 || 20 || n/a
|}

===1.5 M2 RC1 20130703 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || n/a || n/a || 1256 || 1256 || n/a
|-
|| failures || n/a || n/a || n/a || 25 || 20 || n/a
|-
|| fixed || n/a || n/a || n/a || 0 || 0 || n/a
|-
|| NAB || n/a || n/a || n/a || 25 || 20 || n/a
|}

===1.4.1 RC1 20130612 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1232 || 1232 || 1232 || 1232 || n/a
|-
|| failures || n/a || 23 || 36 || 19 || 21 || n/a
|-
|| fixed || n/a || 0 || 0 || 0 || 0 || n/a
|-
|| NAB || n/a || 23 || 36 || 19 || 21 || n/a
|}

===1.5 M1 RC1 20130604 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1242 || n/a || 1242 || 1242 || n/a
|-
|| failures || n/a || 28 || n/a || 23 || 19 || n/a
|-
|| fixed || n/a || 0 || n/a || 0 || 0 || n/a
|-
|| NAB || n/a || 28 || n/a || 23 || 19 || n/a
|}

===1.3.2 20130516 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1232 || 1232 || 1232 || 1232 || n/a
|-
|| failures || n/a || 23 || 42 || 18 || 24 || n/a
|-
|| fixed || n/a || 0 || 0 || 0 || 0 || n/a
|-
|| NAB || n/a || 23 || 42 || 18 || 24 || n/a
|}

===1.4 M6 RC2 20130418 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1232 || 1232 || 1232 || 1232 || n/a
|-
|| failures || n/a || 23 || 37 || 19 || 21 || n/a
|-
|| fixed || n/a || 0 || 0 || 0 || 0 || n/a
|-
|| NAB || n/a || 23 || 37 || 19 || 21 || n/a
|}

===1.4 M5 RC3 20130327 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1238 || n/a || 1232 || 1250 || n/a
|-
|| failures || n/a || 24 || n/a || 21 || 20 || n/a
|-
|| fixed || n/a || 0 || 0 || 0 || 0 || n/a
|-
|| NAB || n/a || 24 || n/a || 21 || 20 || n/a
|}

===1.4 M5 RC2 20130327 build===

{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1232 || 1232 || 1232 || 1232 || n/a
|-
|| failures || n/a || 24 || 36 || 19 || 20 || n/a
|-
|| fixed || n/a || 0 || 0 || 0 || 0 || n/a
|-
|| NAB || n/a || 24 || 36 || 19 || 20 || n/a
|}

===1.4 M4 RC1 20130220 build===
'''environment'''
'''LTP version''': ltp-full-20120903.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result.log -C result.fail -d /opt/ltp/tmp &> result.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1232 || 1232 || 1232 || n/a || 1232
|-
|| failures || n/a || 22 || 38 || 19 || n/a || 16
|-
|| fixed || n/a || 0 || 0 || 0 || n/a || 0
|-
|| NAB || n/a || 22 || 38 || 19 || n/a || 15
|}

===1.4 M3 RC2 20130131 build===
'''environment'''
'''LTP version''': ltp-full-20120903.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result.log -C result.fail -d /opt/ltp/tmp &> result.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1232 || 1232 || 1232 || n/a || 1232
|-
|| failures || n/a || 24 || 40 || 23 || n/a || 17
|-
|| fixed || n/a || 0 || 0 || 0 || n/a || 0
|-
|| NAB || n/a || 24 || 40 || 23 || n/a || 17
|}

===1.4 M3 RC1 20130122 build===
'''environment'''
'''LTP version''': ltp-full-20120903.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result.log -C result.fail -d /opt/ltp/tmp &> result.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1232 || 1232 || 1232 || n/a || 1232
|-
|| failures || n/a || 22 || 39 || 22 || n/a || 17
|-
|| fixed || n/a || 0 || 0 || 0 || n/a || 0
|-
|| NAB || n/a || 20 || 39 || 22 || n/a || 17
|}

===1.4 M1 RC1 20121128 build===
'''environment'''
'''LTP version''': ltp-full-20120903.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result.log -C result.fail -d /opt/ltp/tmp &> result.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || n/a || 1232 || 1232 || 1232 || n/a || 1232
|-
|| failures || n/a || 22 || 39 || 18 || n/a || 17
|-
|| fixed || n/a || 0 || 0 || 0 || n/a || 0
|-
|| NAB || n/a || 22 || 39 || 18 || n/a || 17
|}

===1.3 M5 RC4 20121010 build===
'''environment'''
'''LTP version''': ltp-full-20120903.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result.log -C result.fail -d /opt/ltp/tmp &> result.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || 1232 || 1232 || 1232 || 1232 || n/a || 1232
|-
|| failures || 21 || 22 || 38 || 18 || n/a || 16
|-
|| fixed || 0 || 0 || 0 || 0 || n/a || 0
|-
|| NAB || 21 || 22 || 38 || 18 || n/a || 16
|}

===1.3 M5 RC3 20121003 build===
'''environment'''
'''LTP version''': ltp-full-20120903.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120926.log -C result-20120926.fail -d /opt/ltp/tmp &> result-20120926.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || 1227 || 1232 || 1232 || 1232 || n/a || 1229
|-
|| failures || 26 || 22 || 39 || 18 || n/a || 17
|-
|| fixed || 0 || 0 || 0 || 0 || n/a || 0
|-
|| NAB || 26 || 21 || 39 || 18 || n/a || 17
|}

===1.3 M5 RC2 20120926 build===
'''environment'''
'''LTP version''': ltp-full-20120903.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120926.log -C result-20120926.fail -d /opt/ltp/tmp &> result-20120926.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || || 1232 || 1232 || 1232 || ||
|-
|| failures || || 22 || 38 || 18 || ||
|-
|| fixed || || 0 || 0 || 0 || ||
|-
|| NAB || || 22 || 38 || 18 || ||
|}

===1.3 M4 RC3 20120916 build===
'''environment'''
'''LTP version''': ltp-full-20120614.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120916.log -C result-20120916.fail -d /opt/ltp/tmp &> result-20120916.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || 1227 || 1229 || 1229 || 1229 || || 1230
|-
|| failures || 7 || 23 || 40 || 20 || || 15
|-
|| fixed || 0 || 0 || 0 || 0 || || 0
|-
|| NAB || 7 || 23 || 40 || 20 || || 15
|}

===1.3 M3 RC2 20120814 build===
'''environment'''
'''LTP version''': ltp-full-20120614.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120814.log -C result-20120814.fail -d /opt/ltp/tmp &> result-20120814.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || || 1229 || 1229 || 1229 || || 1230
|-
|| failures || || 23 || 33 || 21 || || 17
|-
|| fixed || || 0 || 0 || 0 || || 0
|-
|| NAB || || 23 || 33 || 21 || || 17
|}

===1.3 20120801 build===
'''environment'''
'''LTP version''': ltp-full-20120614.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120801.log -C result-20120801.fail -d /opt/ltp/tmp &> result-20120801.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]''' || '''[[huronriver-ltp|huronriver]]'''
|-
|| total || || 1229 || 1229 || 1229 ||1230 || 1235
|-
|| failures || || 24 || 32 || 24 || 17 || 17
|-
|| fixed || || 2 || 1 || 2 || 1 || 0
|-
|| NAB || || 23 || 26 || 24 || 17 || 17
|}

===1.3 M2 RC1 20120712 build===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120712.log -C result-20120712.fail -d /opt/ltp/tmp &> result-20120712.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || || 1228 || 1228 || n/a || 1229
|-
|| failures || || 26 || 32 || || 18
|-
|| fixed || || 8 || 8 || || 0
|-
|| NAB || || 21 || 24 || || 15
|}

===1.1.2 20120630 build===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120613.log -C result-20120613.fail -d /opt/ltp/tmp &> result-20120613.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || || 1227 || 1228 || 1228 || 1229
|-
|| failures || || 41 || 42 || 29 || 36
|-
|| fixed || || 0 || 0 || 0 || 0
|-
|| NAB || || 36 || 32 || 27 || 24
|}

===1.2.1 20120629 build===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120613.log -C result-20120613.fail -d /opt/ltp/tmp &> result-20120613.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || || 1228 || 1228 || 1228 || 1229
|-
|| failures || || 23 || 30 || 22 || 19
|-
|| fixed || || 0 || 0 || 0 || 0
|-
|| NAB || || 21 || 24 || 20 || 16
|}

===1.3 M1 RC1 20120613 build===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120613.log -C result-20120613.fail -d /opt/ltp/tmp &> result-20120613.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1229 || 1228 || 1227 || 1228 || 1227
|-
|| failures || 16 || 33 || 41 || 30 || 27
|-
|| fixed || 1 || 0 || 0 || 0 || 0
|-
|| NAB || 15 || 29 || 32 || 27 || 24
|}

===1.3 20120606 build===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120606.log -C result-20120606.fail -d /opt/ltp/tmp &> result-20120606.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1229 || 1228 || 1227 || 1228 || 1227
|-
|| failures || 15 || 32 || 39 || 29 || 18
|-
|| fixed || 0 || 0 || 0 || 0 || 0
|-
|| NAB || 15 || 29 || 32 || 27 || 17
|}

===1.2 Denzil RC5===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120423.log -C result-20120423.fail -d /opt/ltp/tmp &> result-20120423.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1229 || 1228 || 1228 || 1228 || 1227
|-
|| failures || 21 || 24 || 30 || 21 || 18
|-
|| fixed || 0 || 0 || 0 || 0 || 0
|-
|| NAB || 16 || 21 || 24 || 19 || 17
|}

===1.2 Denzil RC4===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120418.log -C result-20120418.fail -d /opt/ltp/tmp &> result-20120418.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1229 || 1228 || 1228 || 1228 || 1227
|-
|| failures || 21 || 24 || 30 || 23 || 18
|-
|| fixed || 0 || 0 || 0 || 0 || 0
|-
|| NAB || 16 || 21 || 24 || 21 || 17
|}

===1.2 M4 RC3===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120412.log -C result-20120412.fail -d /opt/ltp/tmp &> result-20120412.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1229 || 1228 || n/a || 1228 || 1227
|-
|| failures || 21 || 24 || n/a || 21 || 18
|-
|| fixed || 0 || 2 || n/a || 2 || 0
|-
|| NAB || 16 || 21 || n/a || 19 || 17
|}

===1.2 M4 RC2===
'''environment'''
'''LTP version''': ltp-full-20120401.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120405.log -C result-20120405.fail -d /opt/ltp/tmp &> result-20120405.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1229 || 1206 || 1206 || 1206 || 1209
|-
|| failures || 21 || 22 || 28 || 20 || 17
|-
|| fixed || 0 || 0 || 0 || 0 || 1
|-
|| NAB || 16 || 20 || 21 || 19 || 16
|}
===1.2 M4 RC1===
'''environment'''
'''LTP version''': ltp-full-20120104.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120328.log -C result-20120328.fail -d /opt/ltp/tmp &> result-20120328.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1208 || 1206 || 1206 || 1206 || 1206
|-
|| failures || 16 || 22 || 28 || 20 || 17
|-
|| fixed || 0 || 0 || 1 || 0 || 0
|-
|| NAB || 16 || 20 || 21 || 19 || 16
|}

===1.2 M3 RC1===
'''environment'''
'''LTP version''': ltp-full-20120104.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120229.log -C result-20120229.fail -d /opt/ltp/tmp &> result-20120229.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1208 || 1206 || 1206 || 1206 || 1026
|-
|| failures || 16 || 22 || 29 || 20 || 17
|-
|| fixed || 11 || 11 || 10 || 11 || 11
|-
|| NAB || 13 || 20 || 21 || 19 || 16
|}

===1.1.1===
'''environment'''
'''LTP version''': ltp-full-20110606.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-20120216.log -C result-20120216.fail -d /opt/ltp/tmp &> result-20120216.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1206 || 1206 || 1206 || 1203 || 1203
|-
|| failures || 36 || 41 || 43 || 41 || 36
|-
|| fixed || 0 || 0 || 0 || 0 || 0
|-
|| NAB || 22 || 36 || 36 || 39 || 24
|}
===1.2 M2 RC1===
'''environment'''
'''LTP version''': ltp-full-20110915.bz2

'''profile''': poky-image-sato-sdk

'''run command''': ./runltp -p -l result-20120111.log -C result-20120111.fail -d /opt/ltp/tmp &> result-20120111.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "blacksand" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1206 || 1206 || 1207 || 1204 || 1206
|-
|| failures || 27 || 30 || 37 || 31 || 26
|-
|| fixed || 13 || 14 || 14 || 9 || 12
|-
|| NAB || 24 || 27 || 33|| 28 || 22
|}

===1.2 M1 RC2===
'''environment'''
'''LTP version''': ltp-full-20110915.bz2

'''profile''': poky-image-sato-sdk

'''run command''': ./runltp -p -l result-20111213.log -C result-20111213.fail -d /opt/ltp/tmp &> result-20111213.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemuarm" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1102 || 1106 || 1102 ||1205 || 1206 || 1207 || 1204 ||1205
|-
|| failures || 34 || 35 || 33 ||36 || 39 || 40 || 38 ||34
|-
|| fixed || 0 || 0 || 0 || 1 || 0 || 0 || 0 ||1
|-
|| NAB || 33 || 34 || 31 ||36 || 34 || 32|| 36 || 34
|}

===1.0.2===
'''environment'''
'''LTP version''': ltp-full-20110606.bz2

'''profile''': poky-image-sato-sdk

'''run command''': ./runltp -p -l result-20111201.log -C result-20111201.fail -d /opt/ltp/tmp &> result-20111201.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemuarm" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1104 || 1105 || 1104 || || 1206 || 1206 || 1206 ||
|-
|| failures || 35 || 35 || 35 || || 36 || 137 || 36 ||
|-
|| fixed || 0 || 0 || 0 || || 0 || 0 || 0 ||
|-
|| NAB || '''34''' || '''35''' || '''35''' || || '''36''' || '''37''' || '''36''' ||
|}

===1.1 M4 RC4===
'''environment'''
'''LTP version''': ltp-full-20110606.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-M4-20110914.log -C result-M4-20110914.fail -d /opt/ltp/tmp &> result-M4-20110914.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemuarm" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1104 || 1105 || 1104 || 1208 || 1206 || 1206 || 1206 || 1208
|-
|| failures || 38 || 39 || 37 || 36 || 41 || 43 || 39 || 35
|-
|| fixed || 0 || 0 || 0 || 0 || 0 || 0 || 0 || 0
|-
|| NAB || '''37''' || '''38''' || '''36''' || '''36''' || '''36''' || '''37''' || '''37''' || '''35'''
|}

===1.1 M4 RC3===
'''environment'''
'''LTP version''': ltp-full-20110606.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-M4-20110914.log -C result-M4-20110914.fail -d /opt/ltp/tmp &> result-M4-20110914.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemuarm" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1104 || 1105 || 1104 || 1208 || 1206 || 1206 || 1206 || 1203
|-
|| failures || 37 || 38 || 37 || 37 || 41 || 44 || 39 || 37
|-
|| fixed || 1 || 1 || 0 || 0 || 2 || 16 || 0 || 0
|-
|| NAB || '''37''' || '''38''' || '''36''' || '''37''' || '''36''' || '''37''' || '''37''' || '''37'''
|}

===1.1 M4 RC2===
'''environment'''
'''LTP version''': ltp-full-20110606.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-M4-20110914.log -C result-M4-20110914.fail -d /opt/ltp/tmp &> result-M4-20110914.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemuarm" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1104 || 1105 || 1104 || 1180 || 1206 || 1206 || 1206 || 1180
|-
|| failures || 38 || 39 || 37 || 26 || 43 || 59 || 39 || 26
|-
|| fixed || 0 || 0 || 0 || 5 || 0 || 0 || 6 || 1
|-
|| NAB || '''37''' || '''38''' || '''36''' || '''26''' || '''38''' || '''43''' || '''37''' || '''26'''
|}

===1.1 M3===
'''environment'''
'''LTP version''': ltp-full-20110606.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-M3-20110806.log -C result-M3-20110806.fail -d /opt/ltp/tmp &> result-M3-20110806.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemuarm" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1104 || 1105 || 1104 || 1180 || 1207 || 1206 || 1206 || 1180
|-
|| failures || 35 || 37 || 36 || 28 || 41 || 57 || 42 || 27
|-
|| fixed || 0 || 3 || 3 || 0 || 3 || 104 || 0 || 9
|-
|| NAB || '''34''' || '''36''' || '''32''' || '''23''' || '''35''' || '''51''' || '''36''' || '''27'''
|}

===1.1 M2===
'''environment'''
'''LTP version''': ltp-full-20101031.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-M2-20110711.log -C result-M2-20110711.fail -d /opt/ltp/tmp &> result-M2-20110711.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemuarm" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1078 || 1078 || 1080 || 1182 || 1180 || 1179 || 1180 || 1180
|-
|| failures || 25 || 29 || 26 || 28 || 33 || 146 || 31 || 30
|-
|| fixed || 1 || 0 || 0 || 2 || 1 || 2 || 1 || 3
|-
|| NAB || '''23''' || '''25''' || '''23''' || '''23''' || '''24''' || '''23''' || '''24''' || '''24'''
|}

===1.1 M1===
'''environment'''
'''LTP version''': ltp-full-20101031.bz2

'''profile''': core-image-sato-sdk

'''run command''': ./runltp -p -l result-M1-20110528.log -C result-M1-20110528.fail -d /opt/ltp/tmp &> result-M2-20110528.fulllog

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemuarm" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]''' || '''[[sugarbay-ltp|sugarbay]]'''
|-
|| total || 1078 || 1078 || 1078 || 1182 || 1180 || 1179 || 1180 || 1180
|-
|| failures || 26 || 29 || 26 || 30 || 34 || 146 || 32 || 33
|-
|| fixed || 0 || 0 || 0 || 0 || 0 || 0 || 0 || 0
|-
|| NAB || '''23''' || '''25''' || '''23''' || '''4''' || '''25''' || '''23''' || '''25''' || 0
|-
|| LTP || 0 || 0 || 0 || 0 || 0 || 0 || 0 || 0
|-
|| Duplicated || 0 || 0 || 0 || '''29''' || '''5''' || '''5''' || '''5''' || '''35'''
|-
|| pending || 0 || '''3''' || '''3''' || '''3''' || '''3''' || '''3''' || 0 || 0
|}

===1.0 M4===
'''environment'''
'''LTP version''': ltp-full-20101031.bz2

'''profile''': poky-image-sdk

'''run command''': ../runltp -p -l result-M4-20110318.log -C result-M4-20110318.fail -d /opt/tmp

'''result'''
Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemux86" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemux86-ltp|Qemux86]]''' || '''[[qemux86_64-ltp|Qemux86_64]]''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[netbook-ltp|netbook]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]''' || '''[[Jasperforest-ltp|Jasperforest]] (lsb-sdk)''' || '''[[mpc8315e-rdb-ltp|mpc8315e-rdb]]'''
|-
|| total || 1072 || n/a || 1071 || 1071 || 1081 || n/a || n/a || 1174 || 1182 || 1198 ||
|-
|| failures || 34 || 32 || 34 || 37 || 37 || 33 || 29 || 35 || 145 (*) || 20 ||
|-
|| '''audit''' || '''100%''' || '''100%''' || '''100%''' || '''100%''' || '''100%''' || '''100%''' ||'''100%''' || '''100%''' ||''' 0(0%)''' || '''0(0%)''' ||
|-
|| fixed || '''6''' || 0 || 0 || '''1''' || 0 || 0 || 0 || 0 || 0 || 0 ||
|-
|| NAB || '''26''' || '''1''' || '''1''' || '''4''' || '''1''' || '''2''' || '''1''' || 0 || 0 || 0 ||
|-
|| LTP || '''2''' || '''2''' || 0 || 0 || '''1''' || 0 || 0 || 0 || 0 || ||
|-
|| Duplicated || 0 || '''29''' || '''33''' || '''29''' || '''29''' || '''31''' || '''28''' || '''35''' || 0 || 13 ||
|-
|| pending || 0 || 0 || 0 || '''3''' || 0 || 0 || 0 || 0 || 0 || ||
|-
|| '''similarity''' || '''100%''' || '''90%''' || '''88%''' || '''78%''' || '''78%''' || '''90%''' || '''96%''' || '''85%''' || '''19%''' || ||
|}
* on routerstation kernel is not configured correctly. Lots of new failures
are related to IPC, which may come from lacking of some kernel options. This
has been verified with newer 2.6.37 kernel recently, that only ~60 failures
remaining. So the analysis is skipped for it in this cycle.

===1.0 M2===
'''environment'''
'''LTP version''': ltp-full-20101031.bz2

'''profile''': poky-image-sdk

'''run command''': ../runltp -p -q -l result-M2-20101218.log -C result-M2-20101218.fail -d /opt/tmp

Below table shows overall progress in LTP failures analysis for current milestone:
* '''total''': the number of total test cases
* '''failures''': the number of failures
* '''audit''': the number of audited failures, which status could be:
** fixed: the number of fixed failures
** LTP: native failures
** NAB: Not-A-Bug, the number of the failures which come from miss of some packages due to the profile definition, or can't reproduce locally
** pending: the analysis is done with bug reported, but pending for final solution
** duplicated: the number of failures which are same as on other platforms which have been analyzed already
* '''similarity''': similarity to Qemux86 which is chosen as the base. most cases are common on all targets

(click the title like "qemux86" to check detail data for that target
{|border="1"
|| '''Status''' || '''[[qemux86-ltp|Qemux86]]''' || '''[[qemux86_64-ltp|Qemux86_64]]''' || '''[[qemuppc-ltp|Qemuppc]]''' || '''[[qemuarm-ltp|Qemuarm]]''' || '''[[qemumips-ltp|Qemumips]]''' || '''[[netbook-ltp|netbook]]''' || '''[[blacksand-ltp|blacksand]]''' || '''[[beagleboard-ltp|beagleboard]]''' || '''[[routerstation-ltp|routerstation]]'''
|-
|| total || 1072 || n/a || 1071 || 1071 || 1081 || n/a || n/a || 1174 || 1182
|-
|| failures || 34 || 32 || 34 || 37 || 37 || 33 || 29 || 35 || 145 (*)
|-
|| '''audit''' || '''100%''' || '''100%''' || '''100%''' || '''100%''' || '''100%''' || '''100%''' ||'''100%''' || '''100%''' ||''' 0(0%)'''
|-
|| fixed || '''6''' || 0 || 0 || '''1''' || 0 || 0 || 0 || 0 || 0
|-
|| NAB || '''26''' || '''1''' || '''1''' || '''4''' || '''1''' || '''2''' || '''1''' || 0 || 0
|-
|| LTP || '''2''' || '''2''' || 0 || 0 || '''1''' || 0 || 0 || 0 || 0
|-
|| Duplicated || 0 || '''29''' || '''33''' || '''29''' || '''29''' || '''31''' || '''28''' || '''35''' || 0
|-
|| pending || 0 || 0 || 0 || '''3''' || 0 || 0 || 0 || 0 || 0
|-
|| '''similarity''' || '''100%''' || '''90%''' || '''88%''' || '''78%''' || '''78%''' || '''90%''' || '''96%''' || '''85%''' || '''19%'''
|}
* on routerstation kernel is not configured correctly. Lots of new failures
are related to IPC, which may come from lacking of some kernel options. This
has been verified with newer 2.6.37 kernel recently, that only ~60 failures
remaining. So the analysis is skipped for it in this cycle.

POSIX-results

2020-04-09T04:36:40Z

Yzhao: /* Current Milestone (2.7 RC2 build) */

==Introduction==
This page records the POSIX test results of Yocto for current version. History POSIX test results have been moved to https://wiki.yoctoproject.org/wiki/POSIX_History_Results. You can get more informations from [https://wiki.yoctoproject.org/wiki/Posix_result POSIX test overall on Yocto].

The online POSIX specification could be viewed at [http://pubs.opengroup.org/onlinepubs/007904975/mindex.html IEEE Std 1003.1, 2004 Edition].

The POSIX test suite is from ltp. All POSIX test cases can be get at
[http://ltp.git.sourceforge.net/git/gitweb.cgi?p=ltp/ltp.git;a=tree;f=testcases/open_posix_testsuite POSIX git repository].

Test POSIX on following platforms:
*beaglebone
*mpc8315rdb
*edgerouter
*genericx86-64

There are 1794 test cases in total, only failed items are list here.

=== Result Codes ===
These informations are from POSIX test suit Documentation/HOWTO_ResultCodes.

The PTS result codes are:

#define PTS_PASS 0
#define PTS_FAIL 1
#define PTS_UNRESOLVED 2
#define PTS_UNSUPPORTED 4
#define PTS_UNTESTED 5

A brief discussion of each of these follows:

PTP_PASS Used when the test executes fully with no problems and passes.
PTP_FAIL Used when the test executes fully, but fails.
PTP_UNRESOLVED Used when the test was blocked from fully completing and
the pass/failure results cannot be determined.
PTP_UNSUPPORTED Used if the test is for a conditional feature that is
not implemented.
PTP_UNTESTED Used when a feature does not have a test associated
with it because:
- The test is just a stub and doesn't do anything
- The test is only partially complete and can't really
finish the test
- The test is complete in some cases, but certain things
can happen that leave the test incomplete. When these
happen, it's PTP_UNTESTED.

For every failed case which returns '''PTP_FAIL''' there is a item in https://bugzilla.yoctoproject.org to follow. For other cases which don't return PTP_PASS find the root cause.

==Results and analysis==
The results of groups SIG SEM THR TMR MSG TPS MEM are listed. Conclusion of some test cases have been given.

Values of clumn "status" descript the current status of the case. Some keywords include:

'''Bug''': it is a bug and the test case needs to be fixed.

'''Ignore''': the case is not appropriate for the hardware or linux

'''POSIX''': that test case is in development, that causes the test fails

===Current Milestone (3.1 RC2 build)===
'''Yocto 3.1 RC2 build''' with POSIX test suite version '''20200120'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error_3-1 || '''Not A Bug''' || genericx86-64 edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read_9-1 || '''Not A Bug''' || genericx86-64 edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return_2-1 || '''Not A Bug''' || genericx86-64 edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In glibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_3-2 || '''Not A Bug''' || genericx86-64 edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_4-1 || '''Not A Bug''' || genericx86-64 edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend_5-1 || POSIX || genericx86-64 edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write_7-1 || '''Not A Bug''' || genericx86-64 edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init_7-1 || '''Unsupported''' || edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In glibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || Unsupported || genericx86-64 edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: UNSUPPORTED || The case becomes invalid after glibc-2.23 ||
|-
|| pthread_cond_destroy_speculative_4-1 || Unsupported || beaglebone edgerouter || conformance/interfaces/pthread_cond_destroy/speculative/pthread_cond_destroy_speculative_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_mutex_init_speculative_5-2 || Unsupported || beaglebone edgerouter || conformance/interfaces/pthread_mutex_init/speculative/pthread_mutex_init_speculative_5-2: execution: UNSUPPORTED || ||
|-
|| pthread_mutexattr_gettype_speculative_3-1 || Untested || beaglebone edgerouter || conformance/interfaces/pthread_mutexattr_gettype/speculative/pthread_mutexattr_gettype_speculative_3-1: execution: UNTESTED || ||
|-
|| pthread_cond_broadcast_1-2 || '''Limitted to memory''' || edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock_2-1 || Unsupport by glibc || edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But glibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock_2-2 || Unsupport by glibc || edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || Unsupported || genericx86-64 edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_4-2 || Unsupported || genericx86-64 edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by glibc || edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_1-1 || || genericx86-64 || conformance/interfaces/clock/clock_1-1: execution: FAILED || ||
|-
|| clock_getcpuclockid_5-1 || '''Implement related''' || edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max_1-3 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min_1-3 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam_6-1 || '''Not Supported''' || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler_7-1 || '''Not Supportted''' || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam_20-1 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-1 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-2 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-2 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-3 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-4 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-5 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-2 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-3 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-4 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler_17-2 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-3 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-4 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-1 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-2 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-2 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-3 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-4 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-1 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-2 || Ignore || edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap_31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap_11-4 || '''Not Supported''' || edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: UNTESTED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

POSIX History Results

2020-04-09T04:32:25Z

Yzhao: /* 2.7 M3 RC1 build */

==Introduction==
This page records the POSIX history test results for Yocto from version 1.2.

The POSIX test results for Yocto latest version is at https://wiki.yoctoproject.org/wiki/POSIX-results .

The results before Yocto 1.3 M3 RC2 is recorded by classified by POSIX sub-test groups, and later results will be recorded by Yocto versions.

==Results and analysis==
The results of groups SIG SEM THR TMR MSG TPS MEM are listed. Conclusion of some test cases have been given.

Values of clumn "status" descript the current status of the case. Some keywords include:

'''Bug''': it is a bug and the test case needs to be fixed.

'''Ignore''': the case is not appropriate for the hardware or linux

'''POSIX''': that test case is in development, that causes the test fails

===3.0 RC2 build===
'''Yocto 3.0 RC2 build''' with POSIX test suite version '''20190517'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error_3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read_9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return_2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In glibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend_5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write_7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init_7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In glibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: UNSUPPORTED || The case becomes invalid after glibc-2.23 ||
|-
|| pthread_cond_destroy_speculative_4-1 || Unsupported || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_cond_destroy/speculative/pthread_cond_destroy_speculative_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_mutex_init_speculative_5-2 || Unsupported || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_mutex_init/speculative/pthread_mutex_init_speculative_5-2: execution: UNSUPPORTED || ||
|-
|| pthread_mutexattr_gettype_speculative_3-1 || Untested || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_mutexattr_gettype/speculative/pthread_mutexattr_gettype_speculative_3-1: execution: UNTESTED || ||
|-
|| pthread_cond_broadcast_1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock_2-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But glibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock_2-2 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_4-2 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_1-1 || || genericx86-64 || conformance/interfaces/clock/clock_1-1: execution: FAILED || ||
|-
|| clock_getcpuclockid_5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam_6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler_7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam_20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler_17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap_31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap_11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: UNTESTED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.7 RC2 build===
'''Yocto 2.7 RC2 build''' with POSIX test suite version '''20190115'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error_3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read_9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return_2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In glibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend_5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write_7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init_7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In glibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: UNSUPPORTED || The case becomes invalid after glibc-2.23 ||
|-
|| pthread_cond_destroy_speculative_4-1 || Unsupported || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_cond_destroy/speculative/pthread_cond_destroy_speculative_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_mutex_init_speculative_5-2 || Unsupported || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_mutex_init/speculative/pthread_mutex_init_speculative_5-2: execution: UNSUPPORTED || ||
|-
|| pthread_mutexattr_gettype_speculative_3-1 || Untested || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_mutexattr_gettype/speculative/pthread_mutexattr_gettype_speculative_3-1: execution: UNTESTED || ||
|-
|| pthread_cond_broadcast_1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock_2-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But glibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock_2-2 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_4-2 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_1-1 || || genericx86-64 || conformance/interfaces/clock/clock_1-1: execution: FAILED || ||
|-
|| clock_getcpuclockid_5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam_6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler_7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam_20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler_17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap_31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap_11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: UNTESTED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.7 M3 RC1 build===
'''Yocto 2.7 M3 RC1 build''' with POSIX test suite version '''20190115'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error_3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read_9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return_2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In glibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend_5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write_7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init_7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In glibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: UNSUPPORTED || The case becomes invalid after glibc-2.23 ||
|-
|| pthread_cond_destroy_speculative_4-1 || Unsupported || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_cond_destroy/speculative/pthread_cond_destroy_speculative_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_mutex_init_speculative_5-2 || Unsupported || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_mutex_init/speculative/pthread_mutex_init_speculative_5-2: execution: UNSUPPORTED || ||
|-
|| pthread_mutexattr_gettype_speculative_3-1 || Untested || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_mutexattr_gettype/speculative/pthread_mutexattr_gettype_speculative_3-1: execution: UNTESTED || ||
|-
|| pthread_cond_broadcast_1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock_2-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But glibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock_2-2 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_4-2 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_1-1 || || genericx86-64 || conformance/interfaces/clock/clock_1-1: execution: FAILED || ||
|-
|| clock_getcpuclockid_5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam_6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler_7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam_20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler_17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap_31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap_11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: UNTESTED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.7 M2 RC1 build===
'''Yocto 2.7 M2 RC1 build''' with POSIX test suite version '''20180926'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_cancel_7-1 || '''NEW''' || mpc8315e || conformance/interfaces/aio_cancel/aio_cancel_7-1: execution: UNRESOLVED || ||
|-
|| aio_error_3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read_9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return_2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In glibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend_5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write_7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init_7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In glibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: UNSUPPORTED || The case becomes invalid after glibc-2.23 ||
|-
|| pthread_cond_destroy_speculative_4-1 || Unsupported || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_cond_destroy/speculative/pthread_cond_destroy_speculative_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_mutex_init_speculative_5-2 || Unsupported || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_mutex_init/speculative/pthread_mutex_init_speculative_5-2: execution: UNSUPPORTED || ||
|-
|| pthread_mutexattr_gettype_speculative_3-1 || Untested || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_mutexattr_gettype/speculative/pthread_mutexattr_gettype_speculative_3-1: execution: UNTESTED || ||
|-
|| pthread_cond_broadcast_1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock_2-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But glibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock_2-2 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_4-2 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_1-1 || || genericx86-64 || conformance/interfaces/clock/clock_1-1: execution: FAILED || ||
|-
|| clock_getcpuclockid_5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam_6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler_7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam_20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler_17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap_31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap_11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: UNTESTED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_23-1 || || edgerouter || conformance/interfaces/shm_open/shm_open_23-1: execution: HUNG ||
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.7 M1 RC1 build===
'''Yocto 2.7 M1 RC1 build''' with POSIX test suite version '''20180926'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error_2-1 || '''NEW''' || edgerouter || conformance/interfaces/aio_error/aio_error_2-1: execution: UNRESOLVED ||
||
|-
|| aio_error_3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read_9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return_2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In glibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend_5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write_7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init_7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In glibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: UNSUPPORTED || The case becomes invalid after glibc-2.23 ||
|-
|| pthread_cond_destroy_speculative_4-1 || Unsupported || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_cond_destroy/speculative/pthread_cond_destroy_speculative_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_mutex_init_speculative_5-2 || Unsupported || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_mutex_init/speculative/pthread_mutex_init_speculative_5-2: execution: UNSUPPORTED || ||
|-
|| pthread_mutexattr_gettype_speculative_3-1 || Untested || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_mutexattr_gettype/speculative/pthread_mutexattr_gettype_speculative_3-1: execution: UNTESTED || ||
|-
|| pthread_cond_broadcast_1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock_2-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But glibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock_2-2 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_4-2 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_1-1 || || genericx86-64 || conformance/interfaces/clock/clock_1-1: execution: FAILED || ||
|-
|| clock_getcpuclockid_5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam_6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler_7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam_20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler_17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap_31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap_11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: UNTESTED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_23-1 || || edgerouter || conformance/interfaces/shm_open/shm_open_23-1: execution: HUNG ||
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.6 RC1 build===
'''Yocto 2.6 RC1 build''' with POSIX test suite version '''20180515'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error_2-1 || '''NEW''' || edgerouter || conformance/interfaces/aio_error/aio_error_2-1: execution: UNRESOLVED ||
||
|-
|| aio_error_3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read_9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return_2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In glibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend_5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write_7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init_7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In glibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: UNSUPPORTED || The case becomes invalid after glibc-2.23 ||
|-
|| pthread_cond_destroy_speculative_4-1 || Unsupported || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_cond_destroy/speculative/pthread_cond_destroy_speculative_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_mutex_init_speculative_5-2 || Unsupported || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_mutex_init/speculative/pthread_mutex_init_speculative_5-2: execution: UNSUPPORTED || ||
|-
|| pthread_mutexattr_gettype_speculative_3-1 || Untested || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_mutexattr_gettype/speculative/pthread_mutexattr_gettype_speculative_3-1: execution: UNTESTED || ||
|-
|| pthread_cond_broadcast_1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock_2-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But glibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock_2-2 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_4-2 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_1-1 || || genericx86-64 || conformance/interfaces/clock/clock_1-1: execution: FAILED || ||
|-
|| clock_getcpuclockid_5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam_6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler_7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam_20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler_17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap_31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap_11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_23-1 || || edgerouter || conformance/interfaces/shm_open/shm_open_23-1: execution: HUNG ||
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.6 M3 RC1 build===
'''Yocto 2.6 M3 RC1 build''' with POSIX test suite version '''20180515'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error_2-1 || '''NEW''' || edgerouter || conformance/interfaces/aio_error/aio_error_2-1: execution: UNRESOLVED ||
||
|-
|| aio_error_3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read_9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return_2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In glibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend_5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write_7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init_7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In glibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: UNSUPPORTED || The case becomes invalid after glibc-2.23 ||
|-
|| pthread_cond_destroy_speculative_4-1 || Unsupported || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_cond_destroy/speculative/pthread_cond_destroy_speculative_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_mutex_init_speculative_5-2 || Unsupported || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_mutex_init/speculative/pthread_mutex_init_speculative_5-2: execution: UNSUPPORTED || ||
|-
|| pthread_mutexattr_gettype_speculative_3-1 || Untested || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_mutexattr_gettype/speculative/pthread_mutexattr_gettype_speculative_3-1: execution: UNTESTED || ||
|-
|| pthread_cond_broadcast_1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock_2-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But glibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock_2-2 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_4-2 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_1-1 || || genericx86-64 || conformance/interfaces/clock/clock_1-1: execution: FAILED || ||
|-
|| clock_getcpuclockid_5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam_6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler_7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam_20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler_17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap_31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap_11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_23-1 || || edgerouter || conformance/interfaces/shm_open/shm_open_23-1: execution: HUNG ||
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.6 M2 RC1 build===
'''Yocto 2.6 M2 RC1 build''' with POSIX test suite version '''20180515'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error_2-1 || '''NEW''' || edgerouter || conformance/interfaces/aio_error/aio_error_2-1: execution: UNRESOLVED ||
||
|-
|| aio_error_3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read_9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return_2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In glibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend_5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write_7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init_7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In glibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: UNSUPPORTED || The case becomes invalid after glibc-2.23 ||
|-
|| pthread_cond_destroy_speculative_4-1 || Unsupported || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_cond_destroy/speculative/pthread_cond_destroy_speculative_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_mutex_init_speculative_5-2 || Unsupported || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_mutex_init/speculative/pthread_mutex_init_speculative_5-2: execution: UNSUPPORTED || ||
|-
|| pthread_mutexattr_gettype_speculative_3-1 || Untested || beaglebone mpc8315e edgerouter || conformance/interfaces/pthread_mutexattr_gettype/speculative/pthread_mutexattr_gettype_speculative_3-1: execution: UNTESTED || ||
|-
|| pthread_cond_broadcast_1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock_2-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But glibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock_2-2 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_4-2 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_1-1 || || genericx86-64 || conformance/interfaces/clock/clock_1-1: execution: FAILED || ||
|-
|| clock_getcpuclockid_5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|| clock_settime_8-1 || NEW || beaglebone || conformance/interfaces/clock_settime/clock_settime_8-1: execution: FAILED || ||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam_6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler_7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam_20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler_17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap_31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap_11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_23-1 || || edgerouter || conformance/interfaces/shm_open/shm_open_23-1: execution: HUNG ||
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.5 RC1 build===
'''Yocto 2.5 RC1 build''' with POSIX test suite version '''20180118'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_cancel_5-1 || '''NEW''' || mpc8315e || conformance/interfaces/aio_cancel/aio_cancel_5-1: execution: UNRESOLVED || ||
|-
|| aio_error_3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read_9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return_2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In glibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend_5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write_7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init_7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In glibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: UNSUPPORTED || The case becomes invalid after glibc-2.23 ||
|-
|| pthread_cond_broadcast_1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock_2-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But glibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock_2-2 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_4-2 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_1-1 || || genericx86-64 || conformance/interfaces/clock/clock_1-1: execution: FAILED || ||
|-
|| clock_getcpuclockid_5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam_6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler_7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam_20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler_17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap_31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap_21-1 || '''NEW''' || beaglebone mpc8315e-rdb edgerouter || conformance/interfaces/mmap/mmap_21-1: execution: FAILED ||
||
|-
|| mmap_11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_23-1 || || edgerouter || conformance/interfaces/shm_open/shm_open_23-1: execution: HUNG ||
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.5 M3 RC1 build===
'''Yocto 2.5 M3 RC1 build''' with POSIX test suite version '''20180118'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error_3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read_9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return_2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In glibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend_5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write_7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init_7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In glibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: UNSUPPORTED || The case becomes invalid after glibc-2.23 ||
|-
|| pthread_cond_broadcast_1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock_2-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But glibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock_2-2 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_4-2 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_1-1 || || genericx86-64 || conformance/interfaces/clock/clock_1-1: execution: FAILED || ||
|-
|| clock_getcpuclockid_5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam_6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler_7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam_20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler_17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap_31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap_11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_23-1 || || edgerouter || conformance/interfaces/shm_open/shm_open_23-1: execution: HUNG ||
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.5 M2 RC1 build===
'''Yocto 2.5 M2 RC1 build''' with POSIX test suite version '''20180118'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error_3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read_9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return_2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In glibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend_5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write_7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init_7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In glibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: UNSUPPORTED || The case becomes invalid after glibc-2.23 ||
|-
|| pthread_cond_broadcast_1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock_2-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But glibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock_2-2 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_4-2 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_1-1 || || genericx86-64 || conformance/interfaces/clock/clock_1-1: execution: FAILED || ||
|-
|| clock_getcpuclockid_5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam_6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler_7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam_20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler_17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap_31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap_11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_23-1 || || edgerouter || conformance/interfaces/shm_open/shm_open_23-1: execution: HUNG ||
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.5 M1 RC3 build===
'''Yocto 2.5 M1 RC3 build''' with POSIX test suite version '''20170929'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error_3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read_9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return_2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In glibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend_5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write_7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init_7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In glibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: HUNG || The case becomes invalid after glibc-2.23 ||
|-
|| pthread_barrier_wait_6-1 || || beaglebone genericx86-64 || conformance/interfaces/pthread_barrier_wait/pthread_barrier_wait_6-1: execution: SIGNALED || ||
|-
|| pthread_cond_broadcast_1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock_2-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But glibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock_2-2 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_4-2 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_1-1 || || genericx86-64 || conformance/interfaces/clock/clock_1-1: execution: FAILED || ||
|-
|| clock_getcpuclockid_5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam_6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler_7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam_20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler_17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap_31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap_11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_23-1 || || edgerouter || conformance/interfaces/shm_open/shm_open_23-1: execution: HUNG ||
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.5 M1 RC1 build===
'''Yocto 2.5 M1 RC1 build''' with POSIX test suite version '''20170929'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error_3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read_9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return_2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In glibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return_4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend_5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write_7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init_7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In glibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: HUNG || The case becomes invalid after glibc-2.23 ||
|-
|| pthread_barrier_wait_6-1 || || beaglebone genericx86-64 || conformance/interfaces/pthread_barrier_wait/pthread_barrier_wait_6-1: execution: SIGNALED || ||
|-
|| pthread_cond_broadcast_1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock_2-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But glibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock_2-2 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_4-2 || Unsupported || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || Unlocking uninitialized rwlock is undefined on Linux ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by glibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid_5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min_1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam_6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler_7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam_20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam_25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler_17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler_22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap_31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap_11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_23-1 || || edgerouter || conformance/interfaces/shm_open/shm_open_23-1: execution: HUNG ||
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.4 RC3 build===
'''Yocto 2.4 RC3 build''' with POSIX test suite version '''20170516'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: HUNG || ||
|-
|| pthread_barrier_wait_6-1 || || beaglebone genericx86-64 || conformance/interfaces/pthread_barrier_wait/pthread_barrier_wait_6-1: execution: SIGNALED || ||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_23-1 || '''NEW''' || edgerouter || conformance/interfaces/shm_open/shm_open_23-1: execution: HUNG ||
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.4 RC2 build===
'''Yocto 2.4 RC2 build''' with POSIX test suite version '''20170516'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: HUNG || ||
|-
|| pthread_barrier_wait_6-1 || || beaglebone genericx86-64 || conformance/interfaces/pthread_barrier_wait/pthread_barrier_wait_6-1: execution: SIGNALED || ||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_23-1 || '''NEW''' || edgerouter || conformance/interfaces/shm_open/shm_open_23-1: execution: HUNG ||
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.4 RC1 build===
'''Yocto 2.4 RC1 build''' with POSIX test suite version '''20170516'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: HUNG || ||
|-
|| pthread_barrier_wait_6-1 || || beaglebone genericx86-64 || conformance/interfaces/pthread_barrier_wait/pthread_barrier_wait_6-1: execution: SIGNALED || ||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_23-1 || '''NEW''' || edgerouter || conformance/interfaces/shm_open/shm_open_23-1: execution: HUNG ||
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.4 M2 RC3 build===
'''Yocto 2.4 M2 RC3 build''' with POSIX test suite version '''20170516'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: HUNG || ||
|-
|| pthread_barrier_wait_6-1 || || beaglebone genericx86-64 || conformance/interfaces/pthread_barrier_wait/pthread_barrier_wait_6-1: execution: SIGNALED || ||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.4 M2 RC2 build===
'''Yocto 2.4 M2 RC2 build''' with POSIX test suite version '''20170516'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: HUNG || ||
|-
|| pthread_barrier_wait_6-1 || || beaglebone genericx86-64 || conformance/interfaces/pthread_barrier_wait/pthread_barrier_wait_6-1: execution: SIGNALED || ||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.4 M1 RC1 build===
'''Yocto 2.4 M1 RC1 build''' with POSIX test suite version '''20170516'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: HUNG || ||
|-
|| pthread_barrier_wait_6-1 || || beaglebone || conformance/interfaces/pthread_barrier_wait/pthread_barrier_wait_6-1: execution: SIGNALED || ||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.3 RC2 build===
'''Yocto 2.3 RC2 build''' with POSIX test suite version '''20170116'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: HUNG || ||
|-
|| pthread_barrier_wait_6-1 || || mpc8315e beaglebone || conformance/interfaces/pthread_barrier_wait/pthread_barrier_wait_6-1: execution: SIGNALED || ||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.3 M3 RC2 build===
'''Yocto 2.3 M3 RC2 build''' with POSIX test suite version '''20170116'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: HUNG || ||
|-
|| pthread_barrier_wait_6-1 || || mpc8315e beaglebone || conformance/interfaces/pthread_barrier_wait/pthread_barrier_wait_6-1: execution: SIGNALED || ||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.3 M2 RC3 build===
'''Yocto 2.3 M2 RC3 build''' with POSIX test suite version '''20160126'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: HUNG || ||
|-
|| pthread_barrier_wait_6-1 || || mpc8315e beaglebone || conformance/interfaces/pthread_barrier_wait/pthread_barrier_wait_6-1: execution: SIGNALED || ||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| munmap_2-1 || || genericx86-64 beaglebone mpc8315e edgerouter || conformance/interfaces/munmap/munmap_2-1: execution: SIGNALED || ||
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.3 M1 RC1 build===
'''Yocto 2.3 M1 RC1 build''' with POSIX test suite version '''20160126'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: HUNG || ||
|-
|| pthread_barrier_wait_6-1 || || mpc8315e beaglebone || conformance/interfaces/pthread_barrier_wait/pthread_barrier_wait_6-1: execution: SIGNALED || ||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| munmap_2-1 || || genericx86-64 beaglebone mpc8315e edgerouter || conformance/interfaces/munmap/munmap_2-1: execution: SIGNALED || ||
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.2 RC4 build===
'''Yocto 2.2 RC4 build''' with POSIX test suite version '''20160126'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: HUNG || ||
|-
|| pthread_barrier_wait_6-1 || || mpc8315e beaglebone || conformance/interfaces/pthread_barrier_wait/pthread_barrier_wait_6-1: execution: SIGNALED || ||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| munmap_2-1 || || genericx86-64 beaglebone mpc8315e edgerouter || conformance/interfaces/munmap/munmap_2-1: execution: SIGNALED || ||
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.2 M3 RC1 build===
'''Yocto 2.2 M3 RC1 build''' with POSIX test suite version '''20160126'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: HUNG || ||
|-
|| pthread_barrier_wait_6-1 || || mpc8315e beaglebone || conformance/interfaces/pthread_barrier_wait/pthread_barrier_wait_6-1: execution: SIGNALED || ||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| munmap_2-1 || || genericx86-64 beaglebone mpc8315e edgerouter || conformance/interfaces/munmap/munmap_2-1: execution: SIGNALED || ||
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.2 M2 RC1 build===
'''Yocto 2.2 M2 RC1 build''' with POSIX test suite version '''20160126'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/2-1 || || edgerouter || conformance/interfaces/aio_error/aio_error_2-1: execution: UNRESOLVED || ||
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_destroy_2-1 || || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_barrier_destroy/pthread_barrier_destroy_2-1: execution: HUNG || ||
|-
|| pthread_barrier_wait_6-1 || || mpc8315e beaglebone || conformance/interfaces/pthread_barrier_wait/pthread_barrier_wait_6-1: execution: SIGNALED || ||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 mpc8315e edgerouter beaglebone || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: UNSUPPORTED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| munmap_2-1 || || genericx86-64 beaglebone mpc8315e edgerouter || conformance/interfaces/munmap/munmap_2-1: execution: SIGNALED || ||
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.0 RC3 build===
'''Yocto 2.0 RC3 build''' with POSIX test suite version '''20150420'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || mpc8315e edgerouter || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===2.0 RC2 build===
'''Yocto 2.0 RC2 build''' with POSIX test suite version '''20150420'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || mpc8315e edgerouter || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
||clock_settime_8-1 || NEW || beaglebone || conformance/interfaces/clock_settime/clock_settime_8-1: execution: FAILED || ||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===1.9 M3 RC1 build===
'''Yocto 1.9 M3 RC1 build''' with POSIX test suite version '''20150420'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || mpc8315e edgerouter || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===1.9 M2 RC2 build===
'''Yocto 1.9 M2 RC2 build''' with POSIX test suite version '''20150420'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_cancel_7-1 || '''NEW''' || mpc8315e || conformance/interfaces/aio_cancel/aio_cancel_7-1: execution: UNRESOLVED || ||
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || mpc8315e edgerouter || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===1.9 M1 RC2 build===
'''Yocto 1.9 M1 RC2 build''' with POSIX test suite version '''20150420'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || mpc8315e edgerouter || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===1.8 M4 RC2 20150403 build===
'''Yocto 1.8 M4 RC2 20150403 build''' with POSIX test suite version '''20150119'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/2-1 || NEW || edgerouter || conformance/interfaces/aio_error/aio_error_2-1: execution: UNRESOLVED || ||
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || mpc8315e edgerouter || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===1.8 M3 RC3 20150303 build===
'''Yocto 1.8 M3 RC3 20150303 build''' with POSIX test suite version '''20150119'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_cancel_7-1 || || mpc8315e || conformance/interfaces/aio_cancel/aio_cancel_7-1: execution: UNRESOLVED || ||
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || mpc8315e edgerouter || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===1.7 M4 RC5 20141018 build===
'''Yocto 1.7 M4 RC5 20141018 build''' with POSIX test suite version '''20140422'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_cancel_5-1 || || mpc8315e || conformance/interfaces/aio_cancel/aio_cancel_5-1: execution: UNRESOLVED || ||
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===1.7 M4 RC4 20141011 build===
'''Yocto 1.7 M4 RC4 20141011 build''' with POSIX test suite version '''20140422'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_cancel_5-1 || || mpc8315e || conformance/interfaces/aio_cancel/aio_cancel_5-1: execution: UNRESOLVED || ||
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_barrier_wait_2-1 || || edgerouter || conformance/interfaces/pthread_barrier_wait/pthread_barrier_wait_2-1: execution: HUNG || ||
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock_4-1 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-1: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_4-2 || || genericx86-64 || cconformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_4-2: execution: SIGNALED || ||
|-
|| pthread_rwlock_unlock_3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===1.7 M2 RC1 20140730 build===
'''Yocto 1.7 M2 RC1 20140730 build''' with POSIX test suite version '''20140422'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
This test tries to call aio_error with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL.

The POSIX spec says about aio_error:
The aio_error( ) function may fail if:
[EINVAL] The aiocbp argument does not refer to an asynchronous operation whose return status has not yet been retrieved.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/2-1: execution: UNTESTED ||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || mpc8315e edgerouter beaglebone || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/clock_getcpuclockid/clock_getcpuclockid_5-1: execution: UNTESTED
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate privileges (Linux: does not have the CAP_SYS_NICE capability).
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/2-1 || || mpc8315e edgerouter genericx86-64 beaglebone|| conformance/interfaces/sched_setparam/sched_setparam_2-1: execution: UNRESOLVED || ||
|-
||sched_setparam/2-2 || || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_2-2: execution: UNRESOLVED || ||
|-
||sched_setparam/9-1 || || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_9-1: execution: FAILED || ||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_open/shm_open_39-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 beaglebone || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: UNTESTED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===1.6 M5 RC4 20140411 build===
'''Yocto 1.6 M5 RC4 20140411 build''' with POSIX test suite version '''20140115'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
call aio_error with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/aio_return/2-1: execution: UNTESTED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sigaltstack_12-1 || ''' LTP ''' || mpc8315e || conformance/interfaces/sigaltstack/sigaltstack_12-1: execution: FAILED || The value of MINSIGSTKSZ defined by glibc can be different as the value defined by kernel. Should use value which is low enough for all kernel versions. Already fixed in upstream. ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || mpc8315e edgerouter || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/clock_getcpuclockid/5-1: execution: '''UNRESOLVED'''
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/2-1 || || edgerouter || conformance/interfaces/sched_setparam/sched_setparam_2-1: execution: UNRESOLVED || ||
|-
||sched_setparam/2-2 || || edgerouter || conformance/interfaces/sched_setparam/sched_setparam_2-2: execution: UNRESOLVED || ||
|-
||sched_setparam/9-1 || || edgerouter || conformance/interfaces/sched_setparam/sched_setparam_9-1: execution: FAILED || ||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_23-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/shm_open/shm_open_39-1: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-1 || || edgerouter || conformance/interfaces/shm_open/shm_open_23-1: execution: HUNG ||
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/shm_open/shm_open_39-2: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===1.6 M5 RC2 20140402 build===
'''Yocto 1.6 M5 RC2 20140402 build''' with POSIX test suite version '''20140115'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
call aio_error with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/aio_return/2-1: execution: UNTESTED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || genericx86-64 mpc8315e edgerouter || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sigaltstack_12-1 || ''' LTP ''' || mpc8315e || conformance/interfaces/sigaltstack/sigaltstack_12-1: execution: FAILED || The value of MINSIGSTKSZ defined by glibc can be different as the value defined by kernel. Should use value which is low enough for all kernel versions. Already fixed in upstream. ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || genericx86-64 mpc8315e edgerouter || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || mpc8315e edgerouter || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routerstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || mpc8315e edgerouter || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || mpc8315e edgerouter genericx86-64 || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/clock_getcpuclockid/5-1: execution: '''UNRESOLVED'''
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/2-1 || || edgerouter || conformance/interfaces/sched_setparam/sched_setparam_2-1: execution: UNRESOLVED || ||
|-
||sched_setparam/2-2 || || edgerouter || conformance/interfaces/sched_setparam/sched_setparam_2-2: execution: UNRESOLVED || ||
|-
||sched_setparam/9-1 || || edgerouter || conformance/interfaces/sched_setparam/sched_setparam_9-1: execution: FAILED || ||
|-
||sched_setparam/20-1 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || mpc8315e edgerouter genericx86-64 || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || genericx86-64 edgerouter || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_23-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/shm_open/shm_open_39-1: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-1 || || edgerouter || conformance/interfaces/shm_open/shm_open_23-1: execution: HUNG ||
||
|-
|| shm_open_39-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/shm_open/shm_open_39-2: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || mpc8315e edgerouter genericx86-64 || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===1.6 M5 RC1 20140326 build===
'''Yocto 1.6 M5 RC1 20140326 build''' with POSIX test suite version '''20140115'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
call aio_error with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/2-1: execution: UNTESTED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sigaltstack_12-1 || ''' LTP ''' || mpc8315e-rdb || conformance/interfaces/sigaltstack/sigaltstack_12-1: execution: FAILED || The value of MINSIGSTKSZ defined by glibc can be different as the value defined by kernel. Should use value which is low enough for all kernel versions. Already fixed in upstream. ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || routerstation mpc8315e || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routherstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/clock_getcpuclockid/5-1: execution: '''UNRESOLVED'''
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || sugarbay || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/shm_open/shm_open_39-1: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/shm_open/shm_open_39-2: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===1.6 M4 RC1 20140312 build===
'''Yocto 1.6 M4 RC1 20140312 build''' with POSIX test suite version '''20140115'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
call aio_error with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/2-1: execution: UNTESTED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sigaltstack_12-1 || ''' LTP ''' || mpc8315e-rdb || conformance/interfaces/sigaltstack/sigaltstack_12-1: execution: FAILED || The value of MINSIGSTKSZ defined by glibc can be different as the value defined by kernel. Should use value which is low enough for all kernel versions. Already fixed in upstream. ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_cond_signal_2-2 || || beagleboard || conformance/interfaces/pthread_cond_signal/pthread_cond_signal_2-2: execution: SIGNALED || ||
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || routerstation mpc8315e || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routherstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/clock_getcpuclockid/5-1: execution: '''UNRESOLVED'''
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || sugarbay || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/shm_open/shm_open_39-1: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/shm_open/shm_open_39-2: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===1.6 M3 RC2 20140218 build===
'''Yocto 1.6 M3 RC2 20140218 build''' with POSIX test suite version '''20140115'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_fsync_5-1 || || routerstation || conformance/interfaces/aio_fsync/aio_fsync_5-1: execution: UNTESTED ||
||
|-
|| aio_error/2-1 || || routerstation || conformance/interfaces/aio_error/aio_error_2-1: execution: UNRESOLVED ||
||
|-
|| aio_error/3-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
call aio_error with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/2-1: execution: UNTESTED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sigaltstack_12-1 || ''' LTP ''' || mpc8315e-rdb || conformance/interfaces/sigaltstack/sigaltstack_12-1: execution: FAILED || The value of MINSIGSTKSZ defined by glibc can be different as the value defined by kernel. Should use value which is low enough for all kernel versions. Already fixed in upstream. ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_create_14-1 || || routerstation || conformance/interfaces/pthread_create/pthread_create_14-1: execution: SIGNALED || ||
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || routerstation mpc8315e || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routherstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/clock_getcpuclockid/5-1: execution: '''UNRESOLVED'''
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || sugarbay || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|| shm_open_39-1 || '''LTP''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/shm_open/shm_open_39-1: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_open_39-2 || '''LTP''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/shm_open/shm_open_39-2: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_open will return EINVAL, not ENAMETOOLONG
||
|-
|| shm_unlink_10-1 || '''LTP''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/shm_unlink/shm_unlink_10-1: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|| shm_unlink_10-2 || '''LTP''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/shm_unlink/shm_unlink_10-2: execution: FAILED || Glibc 2.19 restricts shm_open and shm_unlink to SHMDIR: http://sourceware.org/git/?p=glibc.git;a=commit;h=5d30d853295a5fe04cad22fdf649c5e0da6ded8c Then if the file name is too long, shm_unlink will return ENOENT, not ENAMETOOLONG
||
|-
|}

===1.6 M3 RC1 20140213 build===
'''Yocto 1.6 M3 RC1 20140213 build''' with POSIX test suite version '''20140115'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/2-1 || || routerstation || conformance/interfaces/aio_error/aio_error_2-1: execution: UNRESOLVED ||
||
|-
|| aio_error/3-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
call aio_error with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/2-1: execution: UNTESTED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || routerstation mpc8315e || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routherstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/clock_getcpuclockid/5-1: execution: '''UNRESOLVED'''
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || sugarbay || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|}

===1.6 M2 RC1 20140114 build===
'''Yocto 1.6 M2 RC1 20140114 build''' with POSIX test suite version '''20130904'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
call aio_error with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/2-1: execution: UNTESTED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_create/14-1 || || routerstation || conformance/interfaces/pthread_create/pthread_create_14-1: execution: SIGNALED ||
||
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || routerstation mpc8315e || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routherstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/clock_getcpuclockid/5-1: execution: '''UNRESOLVED'''
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || sugarbay || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|}

===1.6 M1 RC1 20131203 build===
'''Yocto 1.6 M1 RC1 20131203 build''' with POSIX test suite version '''20130904'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
call aio_error with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/2-1: execution: UNTESTED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || routerstation mpc8315e || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routherstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/clock_getcpuclockid/5-1: execution: '''UNRESOLVED'''
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || sugarbay || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|}

===1.5.1 RC2 20131213 build===
'''Yocto 1.5.1 RC2 20131213 build''' with POSIX test suite version '''20130503'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_cancel/6-1 || || routerstation || conformance/interfaces/aio_cancel/aio_cancel_6-1: execution: UNRESOLVED ||
||
|-
|| aio_error/3-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
call aio_error with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/2-1: execution: UNTESTED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sigaddset_1-3 || '''NEW''' || mpc8315e || conformance/interfaces/sigaddset/sigaddset_1-3: execution: FAILED ||
||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || routerstation mpc8315e || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routherstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/clock_getcpuclockid/5-1: execution: '''UNRESOLVED'''
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || sugarbay || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|}

===1.5 M5 RC6 build===
'''Yocto 1.5 M5 RC6 build''' with POSIX test suite version '''20130503'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_error/3-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
call aio_error with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/2-1: execution: UNTESTED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || sugarbay beagleboard mpc8315e routerstation || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-
|}

====SIG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sigaddset_1-3 || '''NEW''' || mpc8315e || conformance/interfaces/sigaddset/sigaddset_1-3: execution: FAILED ||
||
|-
|}

====SEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Unsupported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sem_init/sem_init_7-1: execution: UNTESTED
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED, we don't need care it.

||
|}

====THR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| pthread_create/14-1 || '''NEW''' || routerstation || conformance/interfaces/pthread_create/pthread_create_14-1: execution: SIGNALED ||
||
|-
|| pthread_mutexattr_gettype_1-2 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-2: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_gettype_1-3 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_gettype/pthread_mutexattr_gettype_1-3: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_mutexattr_settype_1-1 || '''Not A Bug''' || sugarbay beagleboard routerstation mpc8315e || conformance/interfaces/pthread_mutexattr_settype/pthread_mutexattr_settype_1-1: execution: FAILED ||
Not a bug. Test result depends on system implement. Test case try to initialize a pthread_mutexattr_t object with pthread_mutexattr_init() and call pthread_mutexattr_gettype() with an invalid 'attr'.
||
|-
|| pthread_cond_broadcast/1-2 || '''Limitted to memory''' || routerstation mpc8315e || conformance/interfaces/pthread_cond_broadcast/1-2: execution: UNTESTED ||
The case create 1000 process, and check the system memory. If system available memory size less than it requires, the case exit with UNTESTED.
When run single case on routherstation, it passed. But fails on mpc8315e to run single case even just after reboot.
||
|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e || conformance/interfaces/pthread_create/pthread_create_1-6: execution: HUNG ||
Testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass。
||
|-
|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-1: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.
A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.
||
|-
|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_rdlock/pthread_rwlock_rdlock_2-2: execution: FAILED ||
Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. See pthread_rwlock_rdlock/2-1
||
|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/pthread_rwlock_unlock/pthread_rwlock_unlock_3-1: execution: FAILED ||
Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. See pthread_rwlock_rdlock/2-1
||
|-
|}

====TMR====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/5-1 || '''Implement related''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/clock_getcpuclockid/5-1: execution: '''UNRESOLVED'''
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.
This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''Does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".
||
|-
|}

====MSG====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || || ||
|-
|}

====TPS====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_get_priority_max/sched_get_priority_max_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_get_priority_min/sched_get_priority_min_1-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_getparam/6-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_getparam/6-1: execution: UNTESTED
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.
||
|-
||sched_getscheduler/7-1 || '''Not Supportted''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_getscheduler/7-1: execution: UNTESTED
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Similiar with sched_getparam/6-1
||
|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_20-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_21-1: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_21-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_23-5: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-2: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-3: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setparam/sched_setparam_25-4: execution: UNSUPPORTED || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux ||
|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_17-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/15-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_15-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-3: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_19-4: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-1 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-1: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
||sched_setscheduler/22-2 || Ignore || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/sched_setscheduler/sched_setscheduler_22-2: execution: UNSUPPORTED || Schedule policy SCHED_SPORADIC is not supported by linux ||
|-
|}

====MEM====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/31-1 || '''Not Supported''' || sugarbay || conformance/interfaces/mmap/mmap_31-1: execution: UNSUPPORTED ||
This case is NOT supported by Linux. Test parameters length and offset for mmap() are too large. In function get_unmapped_area(), it checks that length should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value differs on different platforms.
||
|-
|| mmap/11-4 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay || conformance/interfaces/mmap/mmap_11-4: execution: FAILED
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.
Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.
The mapped page is cached. This case is not supported by Linux.
mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
||
|-
|}

===1.5 M4 RC3 build===
'''Yocto 1.5 M4 RC3 build''' with POSIX test suite version '''20130503'''.

====AIO====

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_cancel/6-1 || '''NEW''' || routerstation || conformance/interfaces/aio_cancel/aio_cancel_6-1: execution: UNRESOLVED || ||
|-
|| aio_error/3-1 || '''Not A Bug''' || sugarbay mpc8315e routerstation beagleboard || conformance/interfaces/aio_error/3-1: execution: UNTESTED ||
call aio_error with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-
|| aio_read/9-1 || '''Not A Bug''' || sugarbay mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/9-1: execution: UNSUPPORTED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.
Test case try to overflow the aio queue, but not quit sure the critical value on different OS.
||
|-
|| aio_return/2-1 || '''Not A Bug''' || sugarbay mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/2-1: execution: UNTESTED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.
In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/3-2 || '''Not A Bug''' || sugarbay mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/3-2: execution: UNTESTED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_return/4-1 || '''Not A Bug''' || sugarbay mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/4-1: execution: UNTESTED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-
|| aio_suspend/5-1 || POSIX || sugarbay mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''
Test case is a stub
||
|-
|| aio_write/7-1 || '''Not A Bug''' || sugarbay mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/7-1: execution: UNSUPPORTED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb ||
|-
|}

==Results before Yocto 1.3 M4 RC3 20120916 build==
The results of groups SIG SEM THR TMR MSG TPS MEM are listed. Conclusion of some test cases have been given.

Values of clumn "status" descript the current status of the case. Some keywords include:

'''Bug''': it is a bug and the test case needs to be fixed.

'''Ignore''': the case is not appropriate for the hardware or linux

'''POSIX''': that test case is in development, that causes the test fails

===AIO===

====1.3 M3 RC2 20120814 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| lio_listio/11-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard ||
conformance/interfaces/lio_listio/11-1: execution: '''FAILED'''
lio_listio/11-1.c Error lio_listio() should have returned -1
||
for aio_lio_opcode posix says "The supported operations are LIO_READ, LIO_WRITE, and LIO_NOP"
but it does not say what should happen if the value it not one of the above.

eglibc doesn't validate the parameter aio_lio_opcode when in function __aio_enqueue_request called by lio_listio()
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2660 Yocto 2660]
|-

|| aio_return/2-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/2-1: execution: UNRESOLVED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.

In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-

|| aio_return/3-2 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/3-2: execution: UNRESOLVED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-

|| aio_return/4-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/4-1: execution: UNRESOLVED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-

|| aio_error/3-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_error/3-1: execution: UNRESOLVED ||
call aio_error with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-

|| aio_read/9-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/9-1: execution: UNRESOLVED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.

Test case try to overflow the aio queue, but not quit sure the critical value on different OS.

||
|-

|| aio_write/7-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/7-1: execution: UNRESOLVED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.

Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-

|| aio_suspend/2-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/2-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-
|| aio_suspend/5-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_fsync/1-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/1-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_fsync/2-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/2-1: execution: UNTESTED ||
'''''Stub Case'''''

The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED
||
|-

|| aio_fsync/3-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/3-1: execution: UNTESTED ||
'''''Stub Case'''''

The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED
||
|-

|| aio_fsync/6-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/6-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-
|| aio_fsync/7-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/7-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_fsync/10-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/10-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-
|| aio_fsync/11-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/11-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_fsync/13-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/13-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/2-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/2-1: execution: UNSUPPORTED ||
'''''Stub Case'''''

Just test _SC_ASYNCHRONOUS_IO value.
||
|-

|| aio_read/6-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/6-1: execution: UNTESTED ||
'''''Stub Case'''''

Same with aio_read/2-1
||
|-

|| aio_read/12-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/12-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/13-1 ||POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/13-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/14-1 ||POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/14-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/15-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/15-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_write/4-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/4-1: execution: UNSUPPORTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/10-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/10-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/11-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/11-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/12-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/12-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/13-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/13-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| lio_listio/16-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/16-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/17-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/17-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/19-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/19-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/20-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/20-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/21-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/21-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/22-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/22-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/23-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/23-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/24-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/24-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/25-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/25-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-
|}

====1.3 20120802 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| lio_listio/11-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard ||
conformance/interfaces/lio_listio/11-1: execution: '''FAILED'''
lio_listio/11-1.c Error lio_listio() should have returned -1
||
for aio_lio_opcode posix says "The supported operations are LIO_READ, LIO_WRITE, and LIO_NOP"
but it does not say what should happen if the value it not one of the above.

eglibc doesn't validate the parameter aio_lio_opcode when in function __aio_enqueue_request called by lio_listio()
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2660 Yocto 2660]
|-

|| aio_return/2-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/2-1: execution: UNRESOLVED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.

In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-

|| aio_return/3-2 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/3-2: execution: UNRESOLVED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-

|| aio_return/4-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/4-1: execution: UNRESOLVED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-

|| aio_error/3-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_error/3-1: execution: UNRESOLVED ||
call aio_error with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-

|| aio_read/9-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/9-1: execution: UNRESOLVED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.

Test case try to overflow the aio queue, but not quit sure the critical value on different OS.

||
|-

|| aio_write/7-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/7-1: execution: UNRESOLVED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.

Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-

|| aio_suspend/2-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/2-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-
|| aio_suspend/5-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_fsync/1-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/1-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_fsync/2-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/2-1: execution: UNTESTED ||
'''''Stub Case'''''

The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED
||
|-

|| aio_fsync/3-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/3-1: execution: UNTESTED ||
'''''Stub Case'''''

The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED
||
|-

|| aio_fsync/6-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/6-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-
|| aio_fsync/7-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/7-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_fsync/10-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/10-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-
|| aio_fsync/11-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/11-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_fsync/13-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/13-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/2-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/2-1: execution: UNSUPPORTED ||
'''''Stub Case'''''

Just test _SC_ASYNCHRONOUS_IO value.
||
|-

|| aio_read/6-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/6-1: execution: UNTESTED ||
'''''Stub Case'''''

Same with aio_read/2-1
||
|-

|| aio_read/12-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/12-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/13-1 ||POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/13-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/14-1 ||POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/14-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/15-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/15-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_write/4-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/4-1: execution: UNSUPPORTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/10-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/10-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/11-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/11-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/12-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/12-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/13-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/13-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| lio_listio/16-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/16-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/17-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/17-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/19-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/19-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/20-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/20-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/21-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/21-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/22-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/22-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/23-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/23-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/24-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/24-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/25-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/25-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-
|}

====1.3 M2 RC1 20120712 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_cancel/4-1 || Fixed || routerstation || conformance/interfaces/aio_cancel/4-1: execution: UNRESOLVED || ltp commit 3f050dc4ac926158d94dd60ab42c727ad1dfe7aa || [https://bugzilla.yoctoproject.org/show_bug.cgi?id=2659 Yocto 2659]
|-

|| lio_listio/11-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard ||
conformance/interfaces/lio_listio/11-1: execution: '''FAILED'''
lio_listio/11-1.c Error lio_listio() should have returned -1
||
for aio_lio_opcode posix says "The supported operations are LIO_READ, LIO_WRITE, and LIO_NOP"
but it does not say what should happen if the value it not one of the above.

eglibc doesn't validate the parameter aio_lio_opcode when in function __aio_enqueue_request called by lio_listio()
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2660 Yocto 2660]
|-

|| aio_return/2-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/2-1: execution: UNRESOLVED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.

In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-

|| aio_return/3-2 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/3-2: execution: UNRESOLVED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-

|| aio_return/4-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/4-1: execution: UNRESOLVED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-

|| aio_error/3-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_error/3-1: execution: UNRESOLVED ||
call aio_error with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-

|| aio_read/9-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/9-1: execution: UNRESOLVED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.

Test case try to overflow the aio queue, but not quit sure the critical value on different OS.

||
|-

|| aio_write/7-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/7-1: execution: UNRESOLVED ||
ltp commit b56638a7a8ae9cd37e5698de3186dc3cb1434cd8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNSUPPORTED'''.

Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-

|| aio_suspend/2-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/2-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-
|| aio_suspend/5-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_fsync/1-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/1-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_fsync/2-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/2-1: execution: UNTESTED ||
'''''Stub Case'''''

The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED
||
|-

|| aio_fsync/3-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/3-1: execution: UNTESTED ||
'''''Stub Case'''''

The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED
||
|-

|| aio_fsync/6-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/6-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-
|| aio_fsync/7-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/7-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_fsync/10-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/10-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-
|| aio_fsync/11-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/11-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_fsync/13-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/13-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/2-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/2-1: execution: UNSUPPORTED ||
'''''Stub Case'''''

Just test _SC_ASYNCHRONOUS_IO value.
||
|-

|| aio_read/6-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/6-1: execution: UNTESTED ||
'''''Stub Case'''''

Same with aio_read/2-1
||
|-

|| aio_read/12-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/12-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/13-1 ||POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/13-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/14-1 ||POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/14-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/15-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/15-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_write/4-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/4-1: execution: UNSUPPORTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/10-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/10-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/11-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/11-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/12-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/12-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/13-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/13-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| lio_listio/16-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/16-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/17-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/17-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/19-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/19-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/20-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/20-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/21-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/21-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/22-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/22-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/23-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/23-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/24-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/24-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/25-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/25-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-
|}

====1.2.1 20120629 build ====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_cancel/3-1 || '''NEED RETEST''' || sugarbay || conformance/interfaces/aio_cancel/3-1: execution: UNRESOLVED ||
Should be fixed by ltp commit 95e17fbe55f6f6b7d647a07e4a1939875d7af2ad. Pls retest it with ltp 20120614
||
|-
|| aio_suspend/9-1 || NEW || blacksand || conformance/interfaces/aio_suspend/9-1: execution: FAILED ||
'''lack of hardware'''
|| [https://bugzilla.yoctoproject.org/show_bug.cgi?id=2842 Yocto 2842]
|-
|| aio_suspend/3-1 || Fixed || routerstation || conformance/interfaces/aio_suspend/3-1: execution: SIGNALED ||
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2841 Yocto 2841]
|-

|| lio_listio/11-1 || '''Not A Bug''' || sugarbay blacksand mpc8315e routerstation beagleboard ||
conformance/interfaces/lio_listio/11-1: execution: '''FAILED'''
lio_listio/11-1.c Error lio_listio() should have returned -1
||
for aio_lio_opcode posix says "The supported operations are LIO_READ, LIO_WRITE, and LIO_NOP"
but it does not say what should happen if the value it not one of the above.

eglibc doesn't validate the parameter aio_lio_opcode when in function __aio_enqueue_request called by lio_listio()
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2660 Yocto 2660]
|-

|| aio_return/2-1 || '''Not A Bug''' || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/2-1: execution: UNRESOLVED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.

In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-

|| aio_return/3-2 || '''Not A Bug''' || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/3-2: execution: UNRESOLVED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-

|| aio_return/4-1 || '''Not A Bug''' || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/4-1: execution: UNRESOLVED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-

|| aio_error/3-1 || '''Not A Bug''' || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_error/3-1: execution: UNRESOLVED ||
call aio_error with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-

|| aio_read/9-1 || '''Not A Bug''' || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/9-1: execution: UNRESOLVED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNTESTED'''.

Test case try to overflow the aio queue, but not quit sure the critical value on different OS.

||
|-

|| aio_write/7-1 || '''Not A Bug''' || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/7-1: execution: UNRESOLVED ||
ltp commit 3f050dc4ac926158d94dd60ab42c727ad1dfe7aa will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNTESTED'''.

Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-

|| aio_suspend/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/2-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-
|| aio_suspend/5-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_fsync/1-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/1-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_fsync/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/2-1: execution: UNTESTED ||
'''''Stub Case'''''

The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED
||
|-

|| aio_fsync/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/3-1: execution: UNTESTED ||
'''''Stub Case'''''

The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED
||
|-

|| aio_fsync/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/6-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-
|| aio_fsync/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/7-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_fsync/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/10-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-
|| aio_fsync/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/11-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_fsync/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/13-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/2-1: execution: UNSUPPORTED ||
'''''Stub Case'''''

Just test _SC_ASYNCHRONOUS_IO value.
||
|-

|| aio_read/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/6-1: execution: UNTESTED ||
'''''Stub Case'''''

Same with aio_read/2-1
||
|-

|| aio_read/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/12-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/13-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/13-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/14-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/14-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/15-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/15-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_write/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/4-1: execution: UNSUPPORTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/10-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/11-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/12-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/13-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| lio_listio/16-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/16-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/17-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/17-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/19-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/19-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/20-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/20-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/21-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/21-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/22-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/22-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/23-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/23-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/24-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/24-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/25-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/25-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-
|}

====1.3 M1 RC1 20120613 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_cancel/4-1 || Fixed || routerstation || conformance/interfaces/aio_cancel/4-1: execution: UNRESOLVED || ltp commit 3f050dc4ac926158d94dd60ab42c727ad1dfe7aa || [https://bugzilla.yoctoproject.org/show_bug.cgi?id=2659 Yocto 2659]
|-

|| lio_listio/11-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard ||
conformance/interfaces/lio_listio/11-1: execution: '''FAILED'''
lio_listio/11-1.c Error lio_listio() should have returned -1
||
for aio_lio_opcode posix says "The supported operations are LIO_READ, LIO_WRITE, and LIO_NOP"
but it does not say what should happen if the value it not one of the above.

eglibc doesn't validate the parameter aio_lio_opcode when in function __aio_enqueue_request called by lio_listio()
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2660 Yocto 2660]
|-

|| aio_return/2-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/2-1: execution: UNRESOLVED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
||
In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.

In eglibc the return value is same as first return.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-

|| aio_return/3-2 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/3-2: execution: UNRESOLVED ||
Same with aio_return/2-1
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-

|| aio_return/4-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/4-1: execution: UNRESOLVED ||
call aio_return with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2665 Yocto 2665]
|-

|| aio_error/3-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_error/3-1: execution: UNRESOLVED ||
call aio_error with with argument aiocbp which does not point at a control block for an asynchronous I/O request, and expect error EINVAL. But this is optional.
||
[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2666 Yocto 2666]
|-

|| aio_read/9-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/9-1: execution: UNRESOLVED ||
ltp commit 91d8c0c85c97366a7ec4ee08ef3b3e7a38661ac8 will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNTESTED'''.

Test case try to overflow the aio queue, but not quit sure the critical value on different OS.

||
|-

|| aio_write/7-1 || '''Not A Bug''' || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/7-1: execution: UNRESOLVED ||
ltp commit 3f050dc4ac926158d94dd60ab42c727ad1dfe7aa will check the limit of aio queue, if there is no limit, the case is not supported and return '''UNTESTED'''.

Test case try to overflow the aio queue, but const value 1024 is not enough
||
|-

|| aio_suspend/2-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/2-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-
|| aio_suspend/5-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_fsync/1-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/1-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_fsync/2-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/2-1: execution: UNTESTED ||
'''''Stub Case'''''

The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED
||
|-

|| aio_fsync/3-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/3-1: execution: UNTESTED ||
'''''Stub Case'''''

The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED
||
|-

|| aio_fsync/6-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/6-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-
|| aio_fsync/7-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/7-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_fsync/10-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/10-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-
|| aio_fsync/11-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/11-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_fsync/13-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/13-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/2-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/2-1: execution: UNSUPPORTED ||
'''''Stub Case'''''

Just test _SC_ASYNCHRONOUS_IO value.
||
|-

|| aio_read/6-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/6-1: execution: UNTESTED ||
'''''Stub Case'''''

Same with aio_read/2-1
||
|-

|| aio_read/12-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/12-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/13-1 ||POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/13-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/14-1 ||POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/14-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_read/15-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/15-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
|| N/A
|-

|| aio_write/4-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/4-1: execution: UNSUPPORTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/10-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/10-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/11-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/11-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/12-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/12-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| aio_write/13-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/13-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-

|| lio_listio/16-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/16-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/17-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/17-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/19-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/19-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/20-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/20-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/21-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/21-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/22-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/22-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/23-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/23-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/24-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/24-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is not complete, and just return UNTESTED
||
|-

|| lio_listio/25-1 || POSIX || sugarbay blacksand huronriver mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/25-1: execution: UNTESTED ||
'''''Stub Case'''''

Test case is a stub
||
|-
|}

====1.3 20120606 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_cancel/3-1 || Fixed || sugarbay || conformance/interfaces/aio_cancel/3-1: execution: UNRESOLVED || The case has been fix by commit 95e17fb on April 11, 2012, test it with later version ||
|-

|| aio_suspend/9-1 || '''FAILED on sugarbay with ltp 20120401 ''' || sugarbay || conformance/interfaces/aio_suspend/9-1: execution: '''FAILED'''

On routerstation run it directly, fails randomly with message:
aio_suspend/9-1.c aio_suspend() should set errno
to EAGAIN: 4 (Interrupted system call)
|| ltp commit d89f310e5 on Feb 20, 2012 fix this issue. Test pass on routerstation. ||
|-

|| aio_read/8-1 || || sugarbay || conformance/interfaces/aio_read/8-1: execution: '''FAILED''' || Patch sended by Peng Haitao <penght#cn.fujitsu.com> is merged on Mar 21, 2012. Please test it with ltp version 20120401.

Why PASS on mpc8315e:
aiocb doesn't cleanup after declare.
So aiocb.aio_reqprio is random and
beyond AIO_PRIO_DELTA_MAX, so
call aio_read() fails and returns -1

||
|-
|| aio_write/6-1 || || sugarbay || conformance/interfaces/aio_write/6-1: execution: '''FAILED''' || Same with aio_read/8-1. ||
|-
|| lio_listio/11-1 || eglibc issue || sugarbay blacksand mpc8315e routerstation beagleboard ||
conformance/interfaces/lio_listio/11-1: execution: '''FAILED'''
lio_listio/11-1.c Error lio_listio() should have returned -1
|| for aio_lio_opcode posix says "The supported operations are LIO_READ, LIO_WRITE, and LIO_NOP"
but it does not say what should happen if the value it not one of the above.

eglibc doesn't validate the parameter aio_lio_opcode when in function __aio_enqueue_request called by lio_listio()
||
|-

|| aio_fsync/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/2-1: execution: UNTESTED || The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED ||
|-
|| aio_fsync/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/3-1: execution: UNTESTED || The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED ||
|-

|| aio_return/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/2-1: execution: UNRESOLVED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
|| In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.

In eglibc the return value is same as first return.
||
|-
|| aio_return/3-2 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/3-2: execution: UNRESOLVED || Same with aio_return/2-1||
|-
|| aio_return/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/4-1: execution: UNRESOLVED || Same with aio_return/2-1||
|-

|| aio_suspend/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/2-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_suspend/5-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED || Test case is a stub ||
|-

|| aio_error/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_error/3-1: execution: UNRESOLVED || test aio_error with invalid aiocb, but the case is not fully complete ||
|-

|| aio_fsync/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/10-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/11-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/1-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/1-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/13-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-

|| aio_fsync/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/6-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/7-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-

|| aio_read/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/12-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/13-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/13-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/14-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/14-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/15-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/15-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/2-1: execution: UNSUPPORTED || Test case is outdated, compare
sysconf(_SC_ASYNCHRONOUS_IO) != 200112L
if true return UNSUPPORTED. The const value should be 200809L now.
||
|-
|| aio_read/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/6-1: execution: UNTESTED || Same with aio_read/2-1 ||
|-

|| aio_read/9-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/9-1: execution: UNRESOLVED || Test case try to overflow the aio queue, but not quit sure the critical value on different OS.||
|-

|| aio_write/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/10-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/11-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/12-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/13-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/4-1: execution: UNSUPPORTED || Test case is a stub||
|-

|| aio_write/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/7-1: execution: UNRESOLVED || Test case try to overflow the aio queue, but const value 1024 is not enough||
|-

|| lio_listio/16-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/16-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/17-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/17-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/19-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/19-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/20-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/20-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/21-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/21-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/22-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/22-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/23-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/23-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/24-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/24-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/25-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/25-1: execution: UNTESTED || Test case is a stub||
|-
|}

====1.2 RC5 Denzil====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_suspend/3-1 || NEW || routerstation || conformance/interfaces/aio_suspend/3-1: execution: '''SIGNALED''' || ||
|-
|| aio_cancel/3-1 || NEW || sugarbay || conformance/interfaces/aio_cancel/3-1: execution: UNRESOLVED || ||
|-

|| aio_suspend/9-1 || '''FAILED on sugarbay with ltp 20120401 ''' || sugarbay || conformance/interfaces/aio_suspend/9-1: execution: '''FAILED'''

On routerstation run it directly, fails randomly with message:
aio_suspend/9-1.c aio_suspend() should set errno
to EAGAIN: 4 (Interrupted system call)
|| ltp commit d89f310e5 on Feb 20, 2012 fix this issue. Test pass on routerstation. ||
|-

|| aio_read/8-1 || || sugarbay || conformance/interfaces/aio_read/8-1: execution: '''FAILED''' || Patch sended by Peng Haitao <penght#cn.fujitsu.com> is merged on Mar 21, 2012. Please test it with ltp version 20120401.

Why PASS on mpc8315e:
aiocb doesn't cleanup after declare.
So aiocb.aio_reqprio is random and
beyond AIO_PRIO_DELTA_MAX, so
call aio_read() fails and returns -1

||
|-
|| aio_write/6-1 || || sugarbay || conformance/interfaces/aio_write/6-1: execution: '''FAILED''' || Same with aio_read/8-1. ||
|-
|| lio_listio/11-1 || eglibc issue || sugarbay blacksand mpc8315e routerstation beagleboard ||
conformance/interfaces/lio_listio/11-1: execution: '''FAILED'''
lio_listio/11-1.c Error lio_listio() should have returned -1
|| for aio_lio_opcode posix says "The supported operations are LIO_READ, LIO_WRITE, and LIO_NOP"
but it does not say what should happen if the value it not one of the above.

eglibc doesn't validate the parameter aio_lio_opcode when in function __aio_enqueue_request called by lio_listio()
||
|-

|| aio_fsync/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/2-1: execution: UNTESTED || The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED ||
|-
|| aio_fsync/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/3-1: execution: UNTESTED || The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED ||
|-

|| aio_return/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/2-1: execution: UNRESOLVED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
|| In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.

In eglibc the return value is same as first return.
||
|-
|| aio_return/3-2 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/3-2: execution: UNRESOLVED || Same with aio_return/2-1||
|-
|| aio_return/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/4-1: execution: UNRESOLVED || Same with aio_return/2-1||
|-

|| aio_suspend/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/2-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_suspend/5-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED || Test case is a stub ||
|-

|| aio_error/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_error/3-1: execution: UNRESOLVED || test aio_error with invalid aiocb, but the case is not fully complete ||
|-

|| aio_fsync/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/10-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/11-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/1-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/1-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/13-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-

|| aio_fsync/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/6-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/7-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-

|| aio_read/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/12-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/13-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/13-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/14-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/14-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/15-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/15-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/2-1: execution: UNSUPPORTED || Test case is outdated, compare
sysconf(_SC_ASYNCHRONOUS_IO) != 200112L
if true return UNSUPPORTED. The const value should be 200809L now.
||
|-
|| aio_read/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/6-1: execution: UNTESTED || Same with aio_read/2-1 ||
|-

|| aio_read/9-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/9-1: execution: UNRESOLVED || Test case try to overflow the aio queue, but not quit sure the critical value on different OS.||
|-

|| aio_write/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/10-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/11-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/12-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/13-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/4-1: execution: UNSUPPORTED || Test case is a stub||
|-

|| aio_write/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/7-1: execution: UNRESOLVED || Test case try to overflow the aio queue, but const value 1024 is not enough||
|-

|| lio_listio/16-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/16-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/17-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/17-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/19-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/19-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/20-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/20-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/21-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/21-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/22-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/22-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/23-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/23-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/24-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/24-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/25-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/25-1: execution: UNTESTED || Test case is a stub||
|-
|}

====1.2 RC4 Denzil====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_cancel/3-1 || || blacksand || conformance/interfaces/aio_cancel/3-1: execution: UNRESOLVED || ||
|-

|| aio_suspend/9-1 || '''FAILED on sugarbay with ltp 20120401 ''' || sugarbay || conformance/interfaces/aio_suspend/9-1: execution: '''FAILED'''

On routerstation run it directly, fails randomly with message:
aio_suspend/9-1.c aio_suspend() should set errno
to EAGAIN: 4 (Interrupted system call)
|| ltp commit d89f310e5 on Feb 20, 2012 fix this issue. Test pass on routerstation. ||
|-

|| aio_read/8-1 || || sugarbay || conformance/interfaces/aio_read/8-1: execution: '''FAILED''' || Patch sended by Peng Haitao <penght#cn.fujitsu.com> is merged on Mar 21, 2012. Please test it with ltp version 20120401.

Why PASS on mpc8315e:
aiocb doesn't cleanup after declare.
So aiocb.aio_reqprio is random and
beyond AIO_PRIO_DELTA_MAX, so
call aio_read() fails and returns -1

||
|-
|| aio_write/6-1 || || sugarbay || conformance/interfaces/aio_write/6-1: execution: '''FAILED''' || Same with aio_read/8-1. ||
|-
|| lio_listio/11-1 || eglibc issue || sugarbay blacksand mpc8315e routerstation beagleboard ||
conformance/interfaces/lio_listio/11-1: execution: '''FAILED'''
lio_listio/11-1.c Error lio_listio() should have returned -1
|| for aio_lio_opcode posix says "The supported operations are LIO_READ, LIO_WRITE, and LIO_NOP"
but it does not say what should happen if the value it not one of the above.

eglibc doesn't validate the parameter aio_lio_opcode when in function __aio_enqueue_request called by lio_listio()
||
|-

|| aio_fsync/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/2-1: execution: UNTESTED || The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED ||
|-
|| aio_fsync/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/3-1: execution: UNTESTED || The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED ||
|-

|| aio_return/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/2-1: execution: UNRESOLVED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
|| In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.

In eglibc the return value is same as first return.
||
|-
|| aio_return/3-2 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/3-2: execution: UNRESOLVED || Same with aio_return/2-1||
|-
|| aio_return/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/4-1: execution: UNRESOLVED || Same with aio_return/2-1||
|-

|| aio_suspend/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/2-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_suspend/5-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED || Test case is a stub ||
|-

|| aio_error/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_error/3-1: execution: UNRESOLVED || test aio_error with invalid aiocb, but the case is not fully complete ||
|-

|| aio_fsync/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/10-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/11-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/1-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/1-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/13-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-

|| aio_fsync/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/6-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/7-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-

|| aio_read/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/12-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/13-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/13-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/14-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/14-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/15-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/15-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/2-1: execution: UNSUPPORTED || Test case is outdated, compare
sysconf(_SC_ASYNCHRONOUS_IO) != 200112L
if true return UNSUPPORTED. The const value should be 200809L now.
||
|-
|| aio_read/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/6-1: execution: UNTESTED || Same with aio_read/2-1 ||
|-

|| aio_read/9-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/9-1: execution: UNRESOLVED || Test case try to overflow the aio queue, but not quit sure the critical value on different OS.||
|-

|| aio_write/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/10-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/11-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/12-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/13-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/4-1: execution: UNSUPPORTED || Test case is a stub||
|-

|| aio_write/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/7-1: execution: UNRESOLVED || Test case try to overflow the aio queue, but const value 1024 is not enough||
|-

|| lio_listio/16-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/16-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/17-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/17-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/19-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/19-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/20-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/20-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/21-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/21-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/22-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/22-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/23-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/23-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/24-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/24-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/25-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/25-1: execution: UNTESTED || Test case is a stub||
|-
|}

====1.2 M4 RC3====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_cancel/3-1 || NEW || blacksand || conformance/interfaces/aio_cancel/3-1: execution: UNRESOLVED || ||
|-

|| aio_suspend/9-1 || '''FAILED on blacksand and sugarbay with ltp 20120401 ''' || sugarbay blanksand || conformance/interfaces/aio_suspend/9-1: execution: '''FAILED'''

On routerstation run it directly, fails randomly with message:
aio_suspend/9-1.c aio_suspend() should set errno
to EAGAIN: 4 (Interrupted system call)
|| ltp commit d89f310e5 on Feb 20, 2012 fix this issue. Test pass on routerstation. ||
|-

|| aio_read/8-1 || || sugarbay || conformance/interfaces/aio_read/8-1: execution: '''FAILED''' || Patch sended by Peng Haitao <penght#cn.fujitsu.com> is merged on Mar 21, 2012. Please test it with ltp version 20120401.

Why PASS on mpc8315e:
aiocb doesn't cleanup after declare.
So aiocb.aio_reqprio is random and
beyond AIO_PRIO_DELTA_MAX, so
call aio_read() fails and returns -1

||
|-
|| aio_write/6-1 || || sugarbay || conformance/interfaces/aio_write/6-1: execution: '''FAILED''' || Same with aio_read/8-1. ||
|-
|| lio_listio/11-1 || eglibc issue || sugarbay blacksand mpc8315e routerstation beagleboard ||
conformance/interfaces/lio_listio/11-1: execution: '''FAILED'''
lio_listio/11-1.c Error lio_listio() should have returned -1
|| for aio_lio_opcode posix says "The supported operations are LIO_READ, LIO_WRITE, and LIO_NOP"
but it does not say what should happen if the value it not one of the above.

eglibc doesn't validate the parameter aio_lio_opcode when in function __aio_enqueue_request called by lio_listio()
||
|-

|| aio_fsync/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/2-1: execution: UNTESTED || The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED ||
|-
|| aio_fsync/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/3-1: execution: UNTESTED || The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED ||
|-

|| aio_return/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/2-1: execution: UNRESOLVED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
|| In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.

In eglibc the return value is same as first return.
||
|-
|| aio_return/3-2 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/3-2: execution: UNRESOLVED || Same with aio_return/2-1||
|-
|| aio_return/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/4-1: execution: UNRESOLVED || Same with aio_return/2-1||
|-

|| aio_suspend/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/2-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_suspend/5-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED || Test case is a stub ||
|-

|| aio_error/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_error/3-1: execution: UNRESOLVED || test aio_error with invalid aiocb, but the case is not fully complete ||
|-

|| aio_fsync/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/10-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/11-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/1-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/1-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/13-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-

|| aio_fsync/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/6-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/7-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-

|| aio_read/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/12-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/13-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/13-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/14-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/14-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/15-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/15-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/2-1: execution: UNSUPPORTED || Test case is outdated, compare
sysconf(_SC_ASYNCHRONOUS_IO) != 200112L
if true return UNSUPPORTED. The const value should be 200809L now.
||
|-
|| aio_read/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/6-1: execution: UNTESTED || Same with aio_read/2-1 ||
|-

|| aio_read/9-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/9-1: execution: UNRESOLVED || Test case try to overflow the aio queue, but not quit sure the critical value on different OS.||
|-

|| aio_write/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/10-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/11-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/12-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/13-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/4-1: execution: UNSUPPORTED || Test case is a stub||
|-

|| aio_write/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/7-1: execution: UNRESOLVED || Test case try to overflow the aio queue, but const value 1024 is not enough||
|-

|| lio_listio/16-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/16-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/17-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/17-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/19-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/19-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/20-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/20-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/21-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/21-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/22-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/22-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/23-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/23-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/24-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/24-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/25-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/25-1: execution: UNTESTED || Test case is a stub||
|-
|}

====1.2 M4 RC2====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_fsync/8-1 || NEW || mpc8315e || conformance/interfaces/aio_fsync/8-1: execution: SIGNALED || ||
|-
|| aio_read/8-1 || Fixed || sugarbay routerstation beagleboard || conformance/interfaces/aio_read/8-1: execution: '''FAILED''' || Patch sended by Peng Haitao <penght#cn.fujitsu.com> is merged on Mar 21, 2012. Please test it with ltp version 20120401.

Why PASS on mpc8315e:
aiocb doesn't cleanup after declare.
So aiocb.aio_reqprio is random and
beyond AIO_PRIO_DELTA_MAX, so
call aio_read() fails and returns -1

||
|-
|| aio_write/6-1 || Fixed || sugarbay routerstation beagleboard || conformance/interfaces/aio_write/6-1: execution: '''FAILED''' || Same with aio_read/8-1. ||
|-
|| lio_listio/11-1 || eglibc issue || sugarbay blacksand mpc8315e routerstation beagleboard ||
conformance/interfaces/lio_listio/11-1: execution: '''FAILED'''
lio_listio/11-1.c Error lio_listio() should have returned -1
|| for aio_lio_opcode posix says "The supported operations are LIO_READ, LIO_WRITE, and LIO_NOP"
but it does not say what should happen if the value it not one of the above.

eglibc doesn't validate the parameter aio_lio_opcode when in function __aio_enqueue_request called by lio_listio()
||
|-

|| aio_suspend/9-1 || '''PASS on blacksand with ltp 20120401 ''' || sugarbay || conformance/interfaces/aio_suspend/9-1: execution: '''FAILED'''

On routerstation run it directly, fails randomly with message:
aio_suspend/9-1.c aio_suspend() should set errno
to EAGAIN: 4 (Interrupted system call)
|| ltp commit d89f310e5 on Feb 20, 2012 fix this issue. Test pass on routerstation. ||
|-

|| aio_fsync/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/2-1: execution: UNTESTED || The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED ||
|-
|| aio_fsync/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/3-1: execution: UNTESTED || The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED ||
|-

|| aio_return/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/2-1: execution: UNRESOLVED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
|| In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.

In eglibc the return value is same as first return.
||
|-
|| aio_return/3-2 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/3-2: execution: UNRESOLVED || Same with aio_return/2-1||
|-
|| aio_return/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/4-1: execution: UNRESOLVED || Same with aio_return/2-1||
|-

|| aio_suspend/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/2-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_suspend/5-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED || Test case is a stub ||
|-

|| aio_error/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_error/3-1: execution: UNRESOLVED || test aio_error with invalid aiocb, but the case is not fully complete ||
|-

|| aio_fsync/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/10-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/11-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/1-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/1-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/13-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-

|| aio_fsync/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/6-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/7-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-

|| aio_read/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/12-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/13-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/13-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/14-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/14-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/15-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/15-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/2-1: execution: UNSUPPORTED || Test case is outdated, compare
sysconf(_SC_ASYNCHRONOUS_IO) != 200112L
if true return UNSUPPORTED. The const value should be 200809L now.
||
|-
|| aio_read/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/6-1: execution: UNTESTED || Same with aio_read/2-1 ||
|-

|| aio_read/9-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/9-1: execution: UNRESOLVED || Test case try to overflow the aio queue, but not quit sure the critical value on different OS.||
|-

|| aio_write/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/10-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/11-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/12-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/13-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/4-1: execution: UNSUPPORTED || Test case is a stub||
|-

|| aio_write/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/7-1: execution: UNRESOLVED || Test case try to overflow the aio queue, but const value 1024 is not enough||
|-

|| lio_listio/16-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/16-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/17-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/17-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/19-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/19-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/20-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/20-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/21-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/21-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/22-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/22-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/23-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/23-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/24-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/24-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/25-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/25-1: execution: UNTESTED || Test case is a stub||
|-
|}

====1.2 M4 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_cancel/3-1 || NEW --> Send Patch || sugarbay || conformance/interfaces/aio_cancel/3-1: execution: UNRESOLVED || It not only show on sugarbay, on blacksand it should fail too. Patch send. ||
|-
|| aio_cancel/7-1 || NEW --> Ignore || mpc8315e || conformance/interfaces/aio_cancel/7-1: execution: UNRESOLVED || No reappearance ||
|-
|| aio_read/8-1 || Fixed || sugarbay routerstation beagleboard || conformance/interfaces/aio_read/8-1: execution: '''FAILED''' || Patch sended by Peng Haitao <penght#cn.fujitsu.com> is merged on Mar 21, 2012. Please test it with ltp version 20120401.

Why PASS on mpc8315e:
aiocb doesn't cleanup after declare.
So aiocb.aio_reqprio is random and
beyond AIO_PRIO_DELTA_MAX, so
call aio_read() fails and returns -1

||
|-
|| aio_write/6-1 || Fixed || sugarbay routerstation beagleboard || conformance/interfaces/aio_write/6-1: execution: '''FAILED''' || Same with aio_read/8-1. ||
|-
|| lio_listio/11-1 || eglibc issue || sugarbay blacksand mpc8315e routerstation beagleboard ||
conformance/interfaces/lio_listio/11-1: execution: '''FAILED'''
lio_listio/11-1.c Error lio_listio() should have returned -1
|| for aio_lio_opcode posix says "The supported operations are LIO_READ, LIO_WRITE, and LIO_NOP"
but it does not say what should happen if the value it not one of the above.

eglibc doesn't validate the parameter aio_lio_opcode when in function __aio_enqueue_request called by lio_listio()
||
|-

|| aio_suspend/9-1 || '''PASS on routerstation''' || routerstation sugarbay blacksand || conformance/interfaces/aio_suspend/9-1: execution: '''FAILED'''

On routerstation run it directly, fails randomly with message:
aio_suspend/9-1.c aio_suspend() should set errno
to EAGAIN: 4 (Interrupted system call)
|| ltp commit d89f310e5 on Feb 20, 2012 fix this issue. Test pass on routerstation. ||
|-

|| aio_fsync/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/2-1: execution: UNTESTED || The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED ||
|-
|| aio_fsync/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/3-1: execution: UNTESTED || The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED ||
|-

|| aio_return/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/2-1: execution: UNRESOLVED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
|| In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.

In eglibc the return value is same as first return.
||
|-
|| aio_return/3-2 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/3-2: execution: UNRESOLVED || Same with aio_return/2-1||
|-
|| aio_return/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/4-1: execution: UNRESOLVED || Same with aio_return/2-1||
|-

|| aio_suspend/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/2-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_suspend/5-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED || Test case is a stub ||
|-

|| aio_error/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_error/3-1: execution: UNRESOLVED || test aio_error with invalid aiocb, but the case is not fully complete ||
|-

|| aio_fsync/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/10-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/11-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/1-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/1-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/13-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-

|| aio_fsync/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/6-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/7-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-

|| aio_read/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/12-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/13-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/13-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/14-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/14-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/15-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/15-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/2-1: execution: UNSUPPORTED || Test case is outdated, compare
sysconf(_SC_ASYNCHRONOUS_IO) != 200112L
if true return UNSUPPORTED. The const value should be 200809L now.
||
|-
|| aio_read/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/6-1: execution: UNTESTED || Same with aio_read/2-1 ||
|-

|| aio_read/9-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/9-1: execution: UNRESOLVED || Test case try to overflow the aio queue, but not quit sure the critical value on different OS.||
|-

|| aio_write/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/10-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/11-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/12-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/13-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/4-1: execution: UNSUPPORTED || Test case is a stub||
|-

|| aio_write/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/7-1: execution: UNRESOLVED || Test case try to overflow the aio queue, but const value 1024 is not enough||
|-

|| lio_listio/16-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/16-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/17-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/17-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/19-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/19-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/20-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/20-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/21-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/21-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/22-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/22-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/23-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/23-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/24-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/24-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/25-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/25-1: execution: UNTESTED || Test case is a stub||
|-
|}

====1.2 M3 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| aio_cancel/3-1 || NEW || blacksand || conformance/interfaces/aio_cancel/3-1: execution: UNRESOLVED || No test environment, guess that new malloc aiocb doesn't memset to 0 ||
|-
|| aio_read/8-1 || Fixed || sugarbay routerstation beagleboard || conformance/interfaces/aio_read/8-1: execution: '''FAILED''' || Patch sended by Peng Haitao <penght#cn.fujitsu.com> is merged.

Why PASS on mpc8315e:
aiocb doesn't cleanup after declare.
So aiocb.aio_reqprio is random and
beyond AIO_PRIO_DELTA_MAX, so
call aio_read() fails and returns -1

||
|-
|| aio_write/6-1 || Fixed || sugarbay routerstation beagleboard || conformance/interfaces/aio_write/6-1: execution: '''FAILED''' || Same with aio_read/8-1. ||
|-
|| lio_listio/11-1 || eglibc issue || sugarbay blacksand mpc8315e routerstation beagleboard ||
conformance/interfaces/lio_listio/11-1: execution: '''FAILED'''
lio_listio/11-1.c Error lio_listio() should have returned -1
|| for aio_lio_opcode posix says "The supported operations are LIO_READ, LIO_WRITE, and LIO_NOP"
but it does not say what should happen if the value it not one of the above.

eglibc doesn't validate the parameter aio_lio_opcode when in function __aio_enqueue_request called by lio_listio()
||
|-

|| aio_suspend/9-1 || '''PASS on routerstation''' || routerstation sugarbay blacksand || conformance/interfaces/aio_suspend/9-1: execution: '''FAILED'''

On routerstation run it directly, fails randomly with message:
aio_suspend/9-1.c aio_suspend() should set errno
to EAGAIN: 4 (Interrupted system call)
|| ltp commit d89f310e5 on Feb 20, 2012 fix this issue. Test pass on routerstation. ||
|-

|| aio_fsync/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/2-1: execution: UNTESTED || The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED ||
|-
|| aio_fsync/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/3-1: execution: UNTESTED || The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED ||
|-

|| aio_return/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/2-1: execution: UNRESOLVED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
|| In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.

In eglibc the return value is same as first return.
||
|-
|| aio_return/3-2 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/3-2: execution: UNRESOLVED || Same with aio_return/2-1||
|-
|| aio_return/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/4-1: execution: UNRESOLVED || Same with aio_return/2-1||
|-

|| aio_suspend/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/2-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_suspend/5-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED || Test case is a stub ||
|-

|| aio_error/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_error/3-1: execution: UNRESOLVED || test aio_error with invalid aiocb, but the case is not fully complete ||
|-

|| aio_fsync/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/10-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/11-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/1-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/1-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/13-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-

|| aio_fsync/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/6-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/7-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-

|| aio_read/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/12-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/13-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/13-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/14-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/14-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/15-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/15-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/2-1: execution: UNSUPPORTED || Test case is outdated, compare
sysconf(_SC_ASYNCHRONOUS_IO) != 200112L
if true return UNSUPPORTED. The const value should be 200809L now.
||
|-
|| aio_read/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/6-1: execution: UNTESTED || Same with aio_read/2-1 ||
|-

|| aio_read/9-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/9-1: execution: UNRESOLVED || Test case try to overflow the aio queue, but not quit sure the critical value on different OS.||
|-

|| aio_write/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/10-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/11-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/12-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/13-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/4-1: execution: UNSUPPORTED || Test case is a stub||
|-

|| aio_write/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/7-1: execution: UNRESOLVED || Test case try to overflow the aio queue, but const value 1024 is not enough||
|-

|| lio_listio/16-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/16-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/17-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/17-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/19-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/19-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/20-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/20-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/21-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/21-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/22-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/22-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/23-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/23-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/24-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/24-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/25-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/25-1: execution: UNTESTED || Test case is a stub||
|-
|}

====1.2 M2 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-

|| aio_read/8-1 || POSIX || sugarbay routerstation beagleboard || conformance/interfaces/aio_read/8-1: execution: '''FAILED''' || Patch sended by Peng Haitao <penght#cn.fujitsu.com> is reviewing. ||
|-
|| aio_write/6-1 || POSIX || sugarbay routerstation beagleboard || conformance/interfaces/aio_write/6-1: execution: '''FAILED''' || Same fail reason with aio_read/8-1. If the patch for aio_read/8-1 is merged, then send the similar patch ||
|-
|| lio_listio/11-1 || eglibc issue || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/11-1: execution: '''FAILED''' || for aio_lio_opcode posix says "The supported operations are LIO_READ, LIO_WRITE, and LIO_NOP"

but it does not say what should happen if the value it not one of the above.

eglibc doesn't validate the parameter aio_lio_opcode when in function __aio_enqueue_request called by lio_listio()
||
|-
|| aio_suspend/3-1 || PASSED || routerstation || conformance/interfaces/aio_suspend/3-1: execution: '''SIGNALED''' || Test with ltp release 20120104, it passes. ||
|-
|| aio_suspend/9-1 || POSIX/Fixed || sugarbay blacksand || conformance/interfaces/aio_suspend/9-1: execution: '''FAILED''' ||Test with ltp release 20120104, it hungs. ltp commit d89f310e5 on Feb 20, 2012 fix this issue. ||
|-

|| aio_fsync/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/2-1: execution: UNTESTED || The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED ||
|-
|| aio_fsync/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/3-1: execution: UNTESTED || The case just test the return value of aio_fsync, if not equal to 0, return FAIL, else return UNTESTED ||
|-

|| aio_return/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/2-1: execution: UNRESOLVED
aio_return/2-1.c Second call to aio_return() '''may''' return -1;
aio_return() returned 111
|| In specification, second call to aio_return() return -1 is a kind of possibility, depends on implementation.

In eglibc the return value is same as first return.
||
|-
|| aio_return/3-2 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/3-2: execution: UNRESOLVED || Same with aio_return/2-1||
|-
|| aio_return/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_return/4-1: execution: UNRESOLVED || Same with aio_return/2-1||
|-

|| aio_suspend/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/2-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_suspend/5-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_suspend/5-1: execution: UNSUPPORTED || Test case is a stub ||
|-

|| aio_cancel/7-1 || POSIX/FIXED || blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_cancel/7-1: execution: UNRESOLVED || FIXED by upstream. git commit on Sep 5, 2011: 7a0726ca51d2ba3a4ba068f6cc1833486f44304c ||
|-
|| aio_error/3-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_error/3-1: execution: UNRESOLVED || test aio_error with invalid aiocb, but the case is not fully complete ||
|-

|| aio_fsync/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/10-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/11-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/1-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/1-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/13-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-

|| aio_fsync/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/6-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_fsync/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_fsync/7-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-

|| aio_read/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/12-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/13-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/13-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/14-1 ||POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/14-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/15-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/15-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED || N/A
|-
|| aio_read/2-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/2-1: execution: UNSUPPORTED || Test case is outdated, compare
sysconf(_SC_ASYNCHRONOUS_IO) != 200112L
if true return UNSUPPORTED. The const value should be 200809L now.
||
|-
|| aio_read/6-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/6-1: execution: UNTESTED || Same with aio_read/2-1 ||
|-

|| aio_read/9-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_read/9-1: execution: UNRESOLVED || Test case try to overflow the aio queue, but not quit sure the critical value on different OS.||
|-

|| aio_write/10-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/10-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/11-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/11-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/12-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/12-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/13-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/13-1: execution: UNTESTED || Test case is a stub ||
|-
|| aio_write/4-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/4-1: execution: UNSUPPORTED || Test case is a stub||
|-

|| aio_write/7-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/aio_write/7-1: execution: UNRESOLVED || Test case try to overflow the aio queue, but const value 1024 is not enough||
|-

|| lio_listio/16-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/16-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/17-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/17-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/19-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/19-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/20-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/20-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/21-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/21-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/22-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/22-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/23-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/23-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/24-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/24-1: execution: UNTESTED || Test case is not complete, and just return UNTESTED ||
|-
|| lio_listio/25-1 || POSIX || sugarbay blacksand mpc8315e routerstation beagleboard || conformance/interfaces/lio_listio/25-1: execution: UNTESTED || Test case is a stub||
|-
|}

===SIG===

====1.3 RC2 20120814 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || ||

||
|}

====1.3 20120802 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || ||

||
|}

====1.3 M2 RC1 20120712 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || ||

||
|}

====1.2.1 20120629 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || ||

||
|}

====1.3 M1 RC1 20120613 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || ||

||
|}

====1.3 20120606 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || ||

||
|}

====1.2 RC5 Denzil====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || ||

||
|}

====1.2 RC4 Denzil====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| n/a || || || ||

||
|}

====1.2 M4 RC3====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sigaction/16-1 || POSIX/Merged --> Still Failed in ltp Version 20120104 || routerstation || "test not present" ||
Please test with ltp version 20120401.

Send patch to fix this issue. git commit: f33434dcdf6c4ae30a76b8cf9fdd5e242adaa409 which merge on Feb 2, 2012.

NO SIGSTKFLT on mips platform. Signals are defined in /usr/include/bits/signum.h

|| n/a
|}

====1.2 M4 RC2====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sigaction/16-1 || POSIX/Merged --> Still Failed in ltp Version 20120104 || routerstation || "test not present" ||
Please test with ltp version 20120401.

Send patch to fix this issue. git commit: f33434dcdf6c4ae30a76b8cf9fdd5e242adaa409 which merge on Feb 2, 2012.

NO SIGSTKFLT on mips platform. Signals are defined in /usr/include/bits/signum.h

|| n/a
|}

====1.2 M4 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sigaction/16-1 || POSIX/Merged --> Still Failed in ltp Version 20120104 || routerstation || "test not present" ||
Please test with ltp version 20120401.

Send patch to fix this issue. git commit: f33434dcdf6c4ae30a76b8cf9fdd5e242adaa409 which merge on Feb 2, 2012.

NO SIGSTKFLT on mips platform. Signals are defined in /usr/include/bits/signum.h

|| n/a
|}

====1.2 M3 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sigtimedwait/1-1 || NEW --> PASS || mpc8315e || conformance/interfaces/sigtimedwait/1-1: execution: FAILED ||
NO appear in my test

|| n/a
|-
|| sigaction/16-1 || POSIX/Merged --> PASS for ltp Version 20120104 || routerstation || "test not present" || Send patch to fix this issue. git commit: f33434dcdf6c4ae30a76b8cf9fdd5e242adaa409

NO SIGSTKFLT on mips platform. Signals are defined in /usr/include/bits/signum.h

|| n/a
|}

====1.2 M2 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sigaction/16-1 || POSIX/Merged || routerstation || "test not present" || Send patch to fix this issue. git commit: f33434dcdf6c4ae30a76b8cf9fdd5e242adaa409

NO SIGSTKFLT on mips platform. Signals are defined in /usr/include/bits/signum.h

|| n/a
|}

====1.2 M1 RC2====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sigaltstack/9-1 || POSIX || sugarbay blacksand || conformance/interfaces/sigaltstack/9-1: execution: UNRESOLVED || POSIX issue. Check with next POSIX version. || n/a
|-
|| sigset/7-1 || POSIX || sugarbay blacksand || conformance/interfaces/sigset/7-1: execution: UNRESOLVED || POSIX issue. Check with next POSIX version. || n/a
|-
|| sigset/6-1 || POSIX || sugarbay blacksand || conformance/interfaces/sigset/6-1: execution: UNRESOLVED || POSIX issue. Check with next POSIX version. || n/a
|-
|| sigqueue/9-1 || POSIX || blacksand || conformance/interfaces/sigqueue/9-1: execution: UNRESOLVED || POSIX issue. Check with next POSIX version. || n/a
|-
|| sigaction/16-1 || POSIX/Merged || qemu-mips routerstation || "test not present" || NO SIGSTKFLT on mips platform. Signals are defined in /usr/include/bits/signum.h. Patch to fix this is merged || n/a
|}

===SEM===

====1.3 RC2 20120814 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Not A Bug''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED([[Result Codes]]), we don't need care it.

|| n/a
|}

====1.3 20120802 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Not A Bug''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED([[Result Codes]]), we don't need care it.

|| n/a
|}

====1.3 M2 RC1 20120712 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Not A Bug''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED([[Result Codes]]), we don't need care it.

|| n/a
|}

====1.2.1 20120629 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Not A Bug''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED([[Result Codes]]), we don't need care it.

|| n/a
|}

====1.3 M1 RC1 20120613 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || '''Not A Bug''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
[17:07:31]sysconf(_SC_SEM_NSEMS_MAX) = -1
[17:07:31]File ../../../conformance/interfaces
/sem_init/7-1.c cannot test: There is no
constraint on SEM_NSEMS_MAX

Then return '''UNTESTED'''

|| In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

It return UNTESTED([[Result Codes]]), we don't need care it.

|| n/a
|}

====1.3 20120606 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || can't test: There is no constraint on SEM_NSEMS_MAX || In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

Some one from windriver has send a patch but not merged yet.

|| n/a
|}

====1.2 RC5 Denzil====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || can't test: There is no constraint on SEM_NSEMS_MAX || In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

Some one from windriver has send a patch but not merged yet.

|| n/a
|}

====1.2 RC4 Denzil====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || can't test: There is no constraint on SEM_NSEMS_MAX || In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

Some one from windriver has send a patch but not merged yet.

|| n/a
|}

====1.2 M4 RC3====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || can't test: There is no constraint on SEM_NSEMS_MAX || In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

Some one from windriver has send a patch but not merged yet.

|| n/a
|}

====1.2 M4 RC2====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || can't test: There is no constraint on SEM_NSEMS_MAX || In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

Some one from windriver has send a patch but not merged yet.

|| n/a
|}

====1.2 M4 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || Not Bug || beagleboard routerstation mpc8315e sugarbay blacksand || can't test: There is no constraint on SEM_NSEMS_MAX || For the case, it return UNTESTED. Because there is no limit on SEM_NSEM_MAX.

In the POSIX spec about sysconf() '''Return Value''':
If the variable corresponding to name is described
in <limits.h> as a maximum or minimum value and
'''the variable has no limit''', sysconf( ) shall return −1
without changing the value of errno.

the case check the return value of sysconf and can't get the value of SEM_NSEM_MAX then return UNTESTED.
This obeys POSIX spec and is '''NOT A BUG'''
|| n/a
|}

====1.2 M3 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || can't test: There is no constraint on SEM_NSEMS_MAX || In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1.

No SEM_NSEMS_MAX defined in Yocto same as in Ubuntu and Fedora, so the case fails.

Some one from windriver has send a patch but not merged yet.

|| n/a
|}

====1.2 M2 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_init/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || can't test: There is no constraint on SEM_NSEMS_MAX || In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1. No SEM_NSEMS_MAX defined in Yocto Ubuntu and Fedora, so the case fails.

Some one from windriver has send a patch but not merged yet.

|| n/a
|}

====1.2 M1 RC2====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sem_post/8-1 || POSIX || blacksand || conformance/interfaces/sem_post/8-1: execution: FAILED || POSIX issue. Check next milestone with next POSIX version. || n/a
|-
|| sem_init/7-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || can't test: There is no constraint on SEM_NSEMS_MAX || In eglibc, sysconf() is implemented in sysdeps/posix/sysconf.c. When pass _SC_SEM_NSEMS_MAX to sysconf(), it checks whether SEM_NSEMS_MAX is defined, then if defined return SEM_NSEMS_MAX, otherwise return -1. No SEM_NSEMS_MAX defined in Yocto Ubuntu and Fedora, so the case returns UNTESTED. || n/a
|}

===THR===

====1.3 RC2 20120814 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| pthread_detach/4-3 || NEW || huronriver || conformance/interfaces/pthread_detach/4-3: execution: SIGNALED || ||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2862 Yocto 2862]
|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e ||
execution: HUNG
|| testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass || n/a

|-

|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. || This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.

A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.

||
|-

|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. || See pthread_rwlock_rdlock/2-1 ||

|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. || See pthread_rwlock_rdlock/2-1 ||
|}

====1.3 20120802 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| pthread_detach/4-3 || '''Conformed''' || routerstationpro with LTP 20120401 ||conformance/interfaces/pthread_detach/4-3: execution: HUNG
[17:50:59]System abilities:
[17:50:59] TSA: 200809
[17:50:59] TSS: 200809
[17:50:59] TPS: 200809
[17:50:59] pagesize: 4096
[17:50:59] min stack size: 131072
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]All 33 thread attribute objects were initialized

Segmentation fault
||
multi-threads issue.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2862 Yocto 2862]
|-
|| pthread_cond_broadcast/1-2 || Ignore || beagleboard huronriver ||
HUNG - "timeout"
|| Create too many threads and cause kernel to kill some of them, so the case block on getting mutex.

Log in dmesg:

Out of memory: Kill process 25300 (1-2.run-test)
score 8 or sacrifice child
Killed process 858 (1-2.run-test)
total-vm:26200kB, anon-rss:8236kB, file-rss:4kB

|| n/a
|-

|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e ||
execution: HUNG
|| testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass || n/a

|-

|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. || This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.

A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.

||
|-

|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. || See pthread_rwlock_rdlock/2-1 ||

|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. || See pthread_rwlock_rdlock/2-1 ||
|}

====1.3 M2 RC1 20120712 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| pthread_detach/4-3 || '''Conformed''' || routerstationpro with LTP 20120401 ||conformance/interfaces/pthread_detach/4-3: execution: HUNG
[17:50:59]System abilities:
[17:50:59] TSA: 200809
[17:50:59] TSS: 200809
[17:50:59] TPS: 200809
[17:50:59] pagesize: 4096
[17:50:59] min stack size: 131072
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]All 33 thread attribute objects were initialized

Segmentation fault
||
multi-threads issue.
||[https://bugzilla.yoctoproject.org/show_bug.cgi?id=2862 Yocto 2862]
|-
|| pthread_join/1-2 || '''Retest with 20120614''' || beagleboard routerstationpro mpc8315e sugarbay blacksand huronriver with LTP 20120401 ||conformance/interfaces/pthread_join/1-2: execution: UNRESOLVED || Pls. retest it ||
|-
|| pthread_join/6-3 || '''Retest with 20120614''' || beagleboard routerstationpro mpc8315e sugarbay blacksand huronriver with LTP 20120401 ||conformance/interfaces/pthread_join/6-3: execution: UNRESOLVED || Pls. Retest it ||

|-
|| pthread_cond_broadcast/1-2 || Ignore || beagleboard huronriver ||
HUNG - "timeout"
|| Create too many threads and cause kernel to kill some of them, so the case block on getting mutex.

Log in dmesg:

Out of memory: Kill process 25300 (1-2.run-test)
score 8 or sacrifice child
Killed process 858 (1-2.run-test)
total-vm:26200kB, anon-rss:8236kB, file-rss:4kB

|| n/a
|-

|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e ||
execution: HUNG
|| testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass || n/a

|-

|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. || This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.

A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.

||
|-

|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. || See pthread_rwlock_rdlock/2-1 ||

|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. || See pthread_rwlock_rdlock/2-1 ||
|}

====1.2.1 20120629 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| pthread_detach/4-3 || '''Conformed''' || routerstationpro with LTP 20120614 ||conformance/interfaces/pthread_detach/4-3: execution: HUNG
[17:50:59]System abilities:
[17:50:59] TSA: 200809
[17:50:59] TSS: 200809
[17:50:59] TPS: 200809
[17:50:59] pagesize: 4096
[17:50:59] min stack size: 131072
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]WARNING: The TPS option is claimed to be supported but setscope fails
[17:50:59]All 33 thread attribute objects were initialized

Segmentation fault

|| Multi-threads issue
||https://bugzilla.yoctoproject.org/show_bug.cgi?id=2862
|-
|| pthread_join/1-2 || '''Retest with new version''' || beagleboard routerstationpro mpc8315e sugarbay ||conformance/interfaces/pthread_join/1-2: execution: UNRESOLVED ||
ltp commit 62e3be1facfdb51ef4b9cb1f107fca7ffed06e03 fixes this issue, please test it with ltp version 20120614
||
|-
|| pthread_join/6-3 || '''Retest with new version''' || routerstationpro mpc8315e sugarbay ||conformance/interfaces/pthread_join/6-3: execution: UNRESOLVED || ltp commit 62e3be1facfdb51ef4b9cb1f107fca7ffed06e03 fixes this issue, please test it with ltp version 20120614 ||

|-
|| pthread_cond_broadcast/1-2 || Ignore || beagleboard ||
HUNG - "timeout"
|| Create too many threads and cause kernel to kill some of them, so the case block on getting mutex.

Log in dmesg:

Out of memory: Kill process 25300 (1-2.run-test)
score 8 or sacrifice child
Killed process 858 (1-2.run-test)
total-vm:26200kB, anon-rss:8236kB, file-rss:4kB

|| n/a
|-

|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e ||
execution: HUNG
|| testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass || n/a

|-

|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. || This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.

A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.

||
|-

|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand ||Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. || See pthread_rwlock_rdlock/2-1 ||

|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. || See pthread_rwlock_rdlock/2-1 ||
|}

====1.3 M1 RC1 20120613 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| pthread_cond_signal/1-1 || NEW || routerstationpro ||conformance/interfaces/pthread_cond_signal/1-1: execution: FAILED
[Thread 0x0x2c56d4b0] started and locked the mutex
[Thread 0x0x2c56d4b0] is waiting for the cond
[Thread 0x0x2bd6d4b0] started and locked the mutex
[Thread 0x0x2bd6d4b0] is waiting for the cond
[Thread 0x0x2b56d4b0] started and locked the mutex
[Thread 0x0x2b56d4b0] is waiting for the cond
[Main thread] signals a condition
[Thread 0x0x2c56d4b0] was wakened and acquired the mutex again
[Thread 0x0x2c56d4b0] released the mutex
[Main thread] 1 waiters were wakened
[Main thread] signals to wake up the next thread
[Thread 0x0x2bd6d4b0] was wakened and acquired the mutex again
[Thread 0x0x2bd6d4b0] released the mutex
[Main thread] signals to wake up the next thread
[Main thread] signals to wake up the next thread
[Main thread] signals to wake up the next thread
[Main thread] signals to wake up the next thread
[Main thread] signals to wake up the next thread
[Thread 0x0x2b56d4b0] was wakened and acquired the mutex again
[Main thread] had to signal the condition 7 times
[Main thread] to wake up 3 threads
. Test FAILED.

|| [https://bugzilla.yoctoproject.org/show_bug.cgi?id=2674 2674] ||
|-
|| pthread_create/14-1 || NEW || routerstationpro ||conformance/interfaces/pthread_create/14-1: execution: SIGNALED || Fails randomly. ||
|-
|| pthread_detach/4-3 || || routerstationpro with LTP 20120401 ||conformance/interfaces/pthread_detach/4-3: execution: HUNG || '''NO fails''' when run test case for 100 times ||
|-
|| pthread_join/1-2 || || beagleboard routerstationpro mpc8315e sugarbay blacksand huronriver with LTP 20120401 ||conformance/interfaces/pthread_join/1-2: execution: UNRESOLVED || '''NO fails''' when run test case for 100 times on routerstation ||
|-
|| pthread_join/6-3 || || beagleboard routerstationpro mpc8315e sugarbay blacksand huronriver with LTP 20120401 ||conformance/interfaces/pthread_join/6-3: execution: UNRESOLVED || '''NO fails''' when run test case for 100 times on routerstation ||

|-
|| pthread_cond_broadcast/1-2 || Ignore || beagleboard huronriver ||
HUNG - "timeout"
|| Create too many threads and cause kernel to kill some of them, so the case block on getting mutex.

Log in dmesg:

Out of memory: Kill process 25300 (1-2.run-test)
score 8 or sacrifice child
Killed process 858 (1-2.run-test)
total-vm:26200kB, anon-rss:8236kB, file-rss:4kB

|| n/a
|-

|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e ||
execution: HUNG
|| testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass || n/a

|-

|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. || This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.

A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.

||
|-

|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. || See pthread_rwlock_rdlock/2-1 ||

|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. || See pthread_rwlock_rdlock/2-1 ||
|}

====1.3 20120606 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| pthread_detach/4-3 || || routerstationpro with LTP 20120401 ||conformance/interfaces/pthread_detach/4-3: execution: HUNG || ||
|-
|| pthread_join/1-2 || || beagleboard routerstationpro mpc8315e blacksand with LTP 20120401 ||conformance/interfaces/pthread_join/1-2: execution: UNRESOLVED || ||
|-
|| pthread_join/6-3 || || routerstationpro mpc8315e blacksand with LTP 20120401 ||conformance/interfaces/pthread_join/6-3: execution: UNRESOLVED || ||

|-
|| pthread_cond_broadcast/1-2 || Ignore || beagleboard ||
HUNG - "timeout"
|| Create too many threads and cause kernel to kill some of them, so the case block on getting mutex.

Log in dmesg:

Out of memory: Kill process 25300 (1-2.run-test)
score 8 or sacrifice child
Killed process 858 (1-2.run-test)
total-vm:26200kB, anon-rss:8236kB, file-rss:4kB
|| n/a

|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e ||
execution: HUNG
|| testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass || n/a

|-

|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. || This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.

A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.

||
|-

|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand ||Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. || See pthread_rwlock_rdlock/2-1 ||

|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. || See pthread_rwlock_rdlock/2-1 ||
|}

====1.2 RC5 Denzil====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| pthread_detach/4-3 || || routerstationpro with LTP 20120401 ||conformance/interfaces/pthread_detach/4-3: execution: HUNG || ||
|-
|| pthread_join/1-2 || || beagleboard routerstationpro mpc8315e blacksand with LTP 20120401 ||conformance/interfaces/pthread_join/1-2: execution: UNRESOLVED || ||
|-
|| pthread_join/6-3 || || beagleboard routerstationpro mpc8315e blacksand with LTP 20120401 ||conformance/interfaces/pthread_join/6-3: execution: UNRESOLVED || ||

|-
|| pthread_cond_broadcast/1-2 || Ignore || beagleboard ||
HUNG - "timeout"
|| Create too many threads and cause kernel to kill some of them, so the case block on getting mutex.

Log in dmesg:

Out of memory: Kill process 25300 (1-2.run-test)
score 8 or sacrifice child
Killed process 858 (1-2.run-test)
total-vm:26200kB, anon-rss:8236kB, file-rss:4kB
|| n/a

|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e ||
execution: HUNG
|| testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass || n/a

|-

|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. || This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.

A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.

||
|-

|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand ||Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. || See pthread_rwlock_rdlock/2-1 ||

|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. || See pthread_rwlock_rdlock/2-1 ||
|}

====1.2 RC4 Denzil====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| pthread_cond_signal/1-1 || NEW || mpc8315e with LTP 20120401 ||conformance/interfaces/pthread_cond_signal/1-1: execution: FAILED || ||
|-
|| pthread_detach/4-3 || || routerstationpro with LTP 20120401 ||conformance/interfaces/pthread_detach/4-3: execution: HUNG || ||
|-
|| pthread_join/1-2 || || beagleboard routerstationpro mpc8315e blacksand with LTP 20120401 ||conformance/interfaces/pthread_join/1-2: execution: UNRESOLVED || ||
|-
|| pthread_join/6-3 || || beagleboard routerstationpro mpc8315e blacksand with LTP 20120401 ||conformance/interfaces/pthread_join/6-3: execution: UNRESOLVED || ||

|-
|| pthread_cond_broadcast/1-2 || Ignore || beagleboard ||
HUNG - "timeout"
|| Create too many threads and cause kernel to kill some of them, so the case block on getting mutex.

Log in dmesg:

Out of memory: Kill process 25300 (1-2.run-test)
score 8 or sacrifice child
Killed process 858 (1-2.run-test)
total-vm:26200kB, anon-rss:8236kB, file-rss:4kB
|| n/a

|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e ||
execution: HUNG
|| testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass || n/a

|-

|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. || This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.

A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.

||
|-

|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand ||Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. || See pthread_rwlock_rdlock/2-1 ||

|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. || See pthread_rwlock_rdlock/2-1 ||
|}

====1.2 M4 RC3====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| pthread_detach/4-3 || NEW || blacksand ||conformance/interfaces/pthread_detach/4-3: execution: HUNG || ||
|-
|| pthread_join/1-2 || NEW || beagleboard mpc8315e with LTP 20120401 ||conformance/interfaces/pthread_join/1-2: execution: UNRESOLVED || ||
|-
|| pthread_join/6-3 || NEW || mpc8315e with LTP 20120401 ||conformance/interfaces/pthread_join/6-3: execution: UNRESOLVED || ||

|-
|| pthread_cond_broadcast/1-2 || Ignore || beagleboard ||
HUNG - "timeout"
|| Create too many threads and cause kernel to kill some of them, so the case block on getting mutex.

Log in dmesg:

Out of memory: Kill process 25300 (1-2.run-test)
score 8 or sacrifice child
Killed process 858 (1-2.run-test)
total-vm:26200kB, anon-rss:8236kB, file-rss:4kB
|| n/a

|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e ||
execution: HUNG
|| testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass || n/a

|-

|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. || This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.

A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.

||
|-

|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand ||Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. || See pthread_rwlock_rdlock/2-1 ||

|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. || See pthread_rwlock_rdlock/2-1 ||
|}

====1.2 M4 RC2====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| pthread_join/1-2 || NEW || blacksand with LTP 20120401 ||conformance/interfaces/pthread_join/1-2: execution: UNRESOLVED || ||
|-
|| pthread_join/6-3 || NEW || blacksand with LTP 20120401 ||conformance/interfaces/pthread_join/6-3: execution: UNRESOLVED || ||

|-
|| pthread_cond_broadcast/1-2 || Ignore || beagleboard ||
HUNG - "timeout"
|| Create too many threads and cause kernel to kill some of them, so the case block on getting mutex.

Log in dmesg:

Out of memory: Kill process 25300 (1-2.run-test)
score 8 or sacrifice child
Killed process 858 (1-2.run-test)
total-vm:26200kB, anon-rss:8236kB, file-rss:4kB
|| n/a

|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e ||
execution: HUNG
|| testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass || n/a

|-

|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. || This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.

A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.

||
|-

|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand ||Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. || See pthread_rwlock_rdlock/2-1 ||

|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. || See pthread_rwlock_rdlock/2-1 ||
|}

====1.2 M4 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| pthread_cond_broadcast/1-2 || Ignore || beagleboard ||
HUNG - "timeout"
|| Create too many threads and cause kernel to kill some of them, so the case block on getting mutex.

Log in dmesg:

Out of memory: Kill process 25300 (1-2.run-test)
score 8 or sacrifice child
Killed process 858 (1-2.run-test)
total-vm:26200kB, anon-rss:8236kB, file-rss:4kB
|| n/a

|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e ||
execution: HUNG
|| testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass || n/a

|-

|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. || This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.

A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.

||
|-

|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand ||Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. || See pthread_rwlock_rdlock/2-1 ||

|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. || See pthread_rwlock_rdlock/2-1 ||
|}

====1.2 M3 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| pthread_cond_broadcast/1-2 || Ignore || beagleboard ||
HUNG - "timeout"
|| Create too many threads and cause kernel to kill some of them, so the case block on getting mutex.

Log in dmesg:

Out of memory: Kill process 25300 (1-2.run-test)
score 8 or sacrifice child
Killed process 858 (1-2.run-test)
total-vm:26200kB, anon-rss:8236kB, file-rss:4kB
|| n/a

|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e sugarbay ||
execution: HUNG
|| testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass || n/a

|-

|| pthread_rwlock_rdlock/2-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. || This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a rwlock->__data.'''__flags''' option to identify perfer 'read lock' or write lock, and the default is 'read lock' first. So second reader can get the lock when a higher priority writer is waiting for the lock.

A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported.

||
|-

|| pthread_rwlock_rdlock/2-2 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand ||Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. || See pthread_rwlock_rdlock/2-1 ||

|-
|| pthread_rwlock_unlock/3-1 || Unsupport by eglibc || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. || See pthread_rwlock_rdlock/2-1 ||
|}

====1.2 M2 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| pthread_cond_broadcast/1-2 || Ignore || beagleboard ||
HUNG - "timeout"
|| Create too many threads and cause kernel to kill some of them, so the case block on getting mutex.

Log in dmesg:

Out of memory: Kill process 25300 (1-2.run-test)
score 8 or sacrifice child
Killed process 858 (1-2.run-test)
total-vm:26200kB, anon-rss:8236kB, file-rss:4kB
|| n/a

|-
|| pthread_create/1-6 || POSIX || beagleboard routerstation mpc8315e sugarbay ||
execution: HUNG
|| testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass || n/a

|-
|| pthread_create/10-1 || POSIX/Removed || beagleboard routerstation blacksand sugarbay|| Segmentation fault || test case use an uninitialized attributes object to make case pthread_create() segmentation fault then catch the signal. But the uninitialized object is NOT invalid to pthread_create() all the time || n/a

|-
|| pthread_mutex_lock/3-1 || POSIX/Merged || beagleboard routerstation mpc8315e || User defined signal 2 || Signals are sended before install signal handler|| n/a

|-
|| pthread_rwlock_rdlock/2-1 || Ignore(unsupport) || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. || This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a '''__flags''' option to identify perfer 'read lock' or read lock, and the default is 'read lock' first. A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported. ||

|-
|| pthread_rwlock_rdlock/2-2 || Ignore(unsupport) || beagleboard routerstation mpc8315e sugarbay blacksand ||Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. || See pthread_rwlock_rdlock/2-1 ||

|-
|| pthread_rwlock_unlock/3-1 || Ignore(unsupport) || beagleboard routerstation mpc8315e sugarbay blacksand || Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. || See pthread_rwlock_rdlock/2-1 ||
|}

====1.2 M1 RC2====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| pthread_cond_init/2-2 || POSIX || sugarbay || conformance/interfaces/pthread_cond_init/2-2: execution: FAILED || POSIX issue. Check next milestone with new POSIX version. || n/a
|-
|| pthread_cond_init/1-3 || POSIX || sugarbay || conformance/interfaces/pthread_cond_init/1-3: execution: HUNG || POSIX issue. Check next milestone with new POSIX version. || n/a
|-
|| pthread_mutex_getprioceiling/1-1 || POSIX || sugarbay blacksand || conformance/interfaces/pthread_mutex_getprioceiling/1-1: execution: FAILED || POSIX issue. Check next milestone with new POSIX version. || n/a
|-
|| pthread_mutex_init/5-3 || POSIX || sugarbay || conformance/interfaces/pthread_mutex_init/5-3: execution: SIGNALED || POSIX issue. Check next milestone with new POSIX version.|| n/a
|-
|| pthread_cancel/5-2 || POSIX || blacksand || conformance/interfaces/pthread_cancel/5-2: execution: UNRESOLVED || POSIX issue. Check next milestone with new POSIX version. || n/a
|-
|| pthread_cond_broadcast/1-2 || Ignore || qemu-arm beagleboard || HUNG - "timeout" || Hardware limited.

Create too many threads and cause kernel to kill some of them, so the case block on getting mutex.

Log in dmesg:

Out of memory: Kill process 25300 (1-2.run-test) score 8 or sacrifice child
Killed process 858 (1-2.run-test) total-vm:26200kB, anon-rss:8236kB, file-rss:4kB
|| n/a

|-
|| pthread_create/1-6 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay || || testcase create NCPU=4 threads running with a high priority with the same sched policy policy and one with a low-priority. The low-priority thread should not run until the other threads stop running, unless the machine has more than NCPU processors. Redefine NCPU = sysconf(_SC_NPROCESSORS_CONF), testcase should pass || n/a

|-
|| pthread_create/10-1 || POSIX/Removed || qemu-arm beagleboard qemu-mips routerstation || Segmentation fault || test case use an uninitialized attributes object to make case pthread_create() segmentation fault then catch the signal. But the uninitialized object is NOT invalid to pthread_create() all the time || n/a

|-
|| pthread_create/14-1 || POSIX || routerstation || Segmentation fault || test failed 6/10 times. Test with new version POSIX suite || n/a

|-
|| pthread_mutex_lock/3-1 || POSIX/Patch Merged || qemu-arm beagleboard routerstation qemu-mips mpc8315e || User defined signal 2 || Signals are sended before install signal handler|| n/a

|-
|| pthread_rwlock_rdlock/2-1 || Ignore(unsupport) || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. child thread2 read lock 'rwlock' with low priority should block because a high priority write lock is waiting, but read lock doesn't block. || This test case is to test option '''Thread Execution Scheduling''' of pthread rwlock. But eglibc/libc don't support this option. They provide a '''__flags''' option to identify perfer 'read lock' or read lock, and the default is 'read lock' first. A Non-portable api pthread_rwlockattr_setkind_np() is provided to set this value. The test case is not supported. ||

|-
|| pthread_rwlock_rdlock/2-2 || Ignore(unsupport) || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand ||Main thread read lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with low priority will block. child thread2 read lock 'rwlock' with same low priority should block because a same priority write lock is waiting, but read lock doesn't block. || See pthread_rwlock_rdlock/2-1 ||

|-
|| pthread_rwlock_unlock/3-1 || Ignore(unsupport) || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || Main thread write lock 'rwlock' with high priority. Child thread1 write lock 'wrlock' with medium priority will block. Child thread2 read lock 'wrlock' with same mediumpriority. Child thread3 write lock 'wrlock' with low priority. When main thread unlock 'rwlock', child thread1 get the 'wrlock'. When child thread1 unlock 'rwlock', child thread2 should get the read lock 'wrlock' because it has higher priority than child thread3. But it is the child thread3 who get the 'wrlock'. || See pthread_rwlock_rdlock/2-1 ||
|}

=== TMR ===

====1.3 RC2 20120814 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| timer_getoverrun/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || '''Stub Case'''

Just print something and then return UNTESTED
|| n/a
|-

|| clock_getcpuclockid/5-1 || '''Implement related''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
conformance/interfaces/clock_getcpuclockid/5-1: execution: '''UNRESOLVED'''
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.

This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".

|| n/a
|}

====1.3 20120802 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| timer_settime/5-3 || '''confirmed''' || sugarbay huronriver || conformance/interfaces/timer_settime/5-3: execution: HUNG || We don't get huronriver board
|| https://bugzilla.yoctoproject.org/show_bug.cgi?id=2899
|-
|| timer_getoverrun/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || '''Stub Case'''

Just print something and then return UNTESTED
|| n/a
|-

|| clock_getcpuclockid/5-1 || '''Implement related''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
conformance/interfaces/clock_getcpuclockid/5-1: execution: '''UNRESOLVED'''
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.

This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".

|| n/a
|}

====1.3 M2 RC1 20120712 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| timer_settime/5-3 || '''confirmed''' || sugarbay huronriver || conformance/interfaces/timer_settime/5-3: execution: HUNG || We don't get huronriver board
|| https://bugzilla.yoctoproject.org/show_bug.cgi?id=2899
|-
|| timer_getoverrun/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || '''Stub Case'''

Just print something and then return UNTESTED
|| n/a
|-

|| clock_getcpuclockid/5-1 || '''Implement related''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
conformance/interfaces/clock_getcpuclockid/5-1: execution: '''UNRESOLVED'''
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.

This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".

|| n/a
|}

====1.2.1 20120629 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| timer_settime/5-3 || '''Confirmed''' || sugarbay || conformance/interfaces/timer_settime/5-3: execution: HUNG ||
|| https://bugzilla.yoctoproject.org/show_bug.cgi?id=2899
|-
|| timer_getoverrun/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || '''Stub Case'''

Just print something and then return UNTESTED
|| n/a
|-

|| clock_getcpuclockid/5-1 || '''Implement related''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
conformance/interfaces/clock_getcpuclockid/5-1: execution: '''UNRESOLVED'''
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.

This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".

|| n/a
|}

====1.3 M1 RC1 20120613 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| timer_settime/5-3 || NEW || huronriver || conformance/interfaces/timer_settime/5-3: execution: HUNG || We don't get huronriver board ||
|-
|| timer_getoverrun/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || '''Stub Case'''

Just print something and then return UNTESTED
|| n/a
|-

|| clock_getcpuclockid/5-1 || '''Implement related''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
conformance/interfaces/clock_getcpuclockid/5-1: execution: '''UNRESOLVED'''
clock_getcpuclockid(1, ..) passed unexpectedly
|| Case tests permission. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.

This is '''not supported''' by Linux. In man page, it addresses EPERM "Specified as an '''optional error''' in POSIX.1-2001; '''does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".

|| n/a
|}

====1.3 20120606 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| timer_getoverrun/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return UNTESTED || n/a

|-
|| clock_getcpuclockid/5-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || clock_getcpuclockid(1, ..) passed unexpectedly || Permission issue. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.

This is not supported by Linux. In man page, it addresses EPERM "'''Speci‐fied as an optional error in POSIX.1-2001; does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".

clock_getcpuclockid() is implemented in eglibc source file libc/sysdeps/unix/sysv/linux/clock_getcpuclockid.c, call system call clock_getres() without permission check

|| n/a
|}

====1.2 RC5 Denzil====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| timer_getoverrun/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return UNTESTED || n/a

|-
|| clock_getcpuclockid/5-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || clock_getcpuclockid(1, ..) passed unexpectedly || Permission issue. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.

This is not supported by Linux. In man page, it addresses EPERM "'''Speci‐fied as an optional error in POSIX.1-2001; does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".

clock_getcpuclockid() is implemented in eglibc source file libc/sysdeps/unix/sysv/linux/clock_getcpuclockid.c, call system call clock_getres() without permission check

|| n/a
|}

====1.2 RC4 Denzil====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| timer_settime/5-3 || NEW || sugarbay || || conformance/interfaces/timer_settime/5-3: execution: HUNG ||

|-
|| timer_getoverrun/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return UNTESTED || n/a

|-
|| clock_getcpuclockid/5-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || clock_getcpuclockid(1, ..) passed unexpectedly || Permission issue. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.

This is not supported by Linux. In man page, it addresses EPERM "'''Speci‐fied as an optional error in POSIX.1-2001; does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".

clock_getcpuclockid() is implemented in eglibc source file libc/sysdeps/unix/sysv/linux/clock_getcpuclockid.c, call system call clock_getres() without permission check

|| n/a
|}

====1.2 M4 RC3====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| timer_getoverrun/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return UNTESTED || N/A

|-
|| clock_getcpuclockid/5-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || clock_getcpuclockid(1, ..) passed unexpectedly || Permission issue. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.

This is not supported by Linux. In man page, it addresses EPERM "'''Speci‐fied as an optional error in POSIX.1-2001; does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".

clock_getcpuclockid() is implemented in eglibc source file libc/sysdeps/unix/sysv/linux/clock_getcpuclockid.c, call system call clock_getres() without permission check

|| n/a
|}

====1.2 M4 RC2====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| timer_getoverrun/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return UNTESTED || N/A

|-
|| clock_getcpuclockid/5-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || clock_getcpuclockid(1, ..) passed unexpectedly || Permission issue. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.

This is not supported by Linux. In man page, it addresses EPERM "'''Speci‐fied as an optional error in POSIX.1-2001; does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".

clock_getcpuclockid() is implemented in eglibc source file libc/sysdeps/unix/sysv/linux/clock_getcpuclockid.c, call system call clock_getres() without permission check

|| n/a
|}

====1.2 M4 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| timer_settime/5-3 || || sugarbay || conformance/interfaces/timer_settime/5-3: execution: HUNG || || N/A

|-
|| timer_getoverrun/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return UNTESTED || N/A

|-
|| clock_getcpuclockid/5-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || clock_getcpuclockid(1, ..) passed unexpectedly || Permission issue. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.

This is not supported by Linux. In man page, it addresses EPERM "'''Speci‐fied as an optional error in POSIX.1-2001; does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".

clock_getcpuclockid() is implemented in eglibc source file libc/sysdeps/unix/sysv/linux/clock_getcpuclockid.c, call system call clock_getres() without permission check

|| n/a
|}

====1.2 M3 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| timer_settime/5-3 || NEW || sugarbay || conformance/interfaces/timer_settime/5-3: execution: HUNG || || N/A

|-
|| timer_settime/5-2 || NEW --> Ignore || beagleboard routerstation || conformance/interfaces/timer_settime/5-2: execution: FAILED
signal was not sent
|| Time on these 2 board have not been set, and output of 'date' is someday of year 1970. Set the time and this case PASSES. || N/A

|-

|| timer_getoverrun/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return UNTESTED || N/A

|-
|| clock_getcpuclockid/5-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || clock_getcpuclockid(1, ..) passed unexpectedly || Permission issue. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.

This is not supported by Linux. In man page, it addresses EPERM "'''Speci‐fied as an optional error in POSIX.1-2001; does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".

clock_getcpuclockid() is implemented in eglibc source file libc/sysdeps/unix/sysv/linux/clock_getcpuclockid.c, call system call clock_getres() without permission check

|| n/a
|}

====1.2 M2 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| timer_getoverrun/3-1 || '''POSIX''' || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return UNTESTED || N/A

|-
|| clock_getcpuclockid/5-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || clock_getcpuclockid(1, ..) passed unexpectedly || Permission issue. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.

This is not supported by Linux. In man page, it addresses EPERM "'''Speci‐fied as an optional error in POSIX.1-2001; does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".

clock_getcpuclockid() is implemented in eglibc source file libc/sysdeps/unix/sysv/linux/clock_getcpuclockid.c, call system call clock_getres() without permission check

|| n/a
|}

====1.2 M1 RC2====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| clock_getcpuclockid/6-1 || Ignore || sugarbay blacksand ||conformance/interfaces/clock_getcpuclockid/6-1: execution: UNRESOLVED || PASS on 1.2 M2 RC1 ||
|-
|| timer_getoverrun/3-1 || '''POSIX''' || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return UNTESTED || N/A

|-
|| timer_getoverrun/2-3 || Ignore || qemu-arm beagleboard routerstation || ||
'''PASS on 1.2 M2 RC1'''

"WR: Change CONFIG_HZ from 100 to 250 can solve this." The root cause is that these platform don't provide '''HIGH RESOLUTION TIMER'''. The value on platforms which test case can pass is only 1 nanosecond. But on qemuarm is 10000000 nanoseconds, on routerstation is 4000250 nanoseconds. After set
CONFIG_HIGH_RES_TIMER=y
for '''routerstation''' (CONFIG_HZ=250 is already set), test case passes.

These 2 kernel configurations for qemuarm are not permitted.

|| [http://bugzilla.pokylinux.org/show_bug.cgi?id=1827 Bug 1827]

|-
|| clock_getcpuclockid/5-1 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || clock_getcpuclockid(1, ..) passed unexpectedly || Permission issue. When call clock_getcpuclockid() as a unpriviledge user to get process 'init' cpu time, it succeeds but expect fails with EPERM.

This is not supported by Linux. In man page, it addresses EPERM "'''Speci‐fied as an optional error in POSIX.1-2001; does not occur on Linux unless the kernel does not support obtaining the per-process CPU-time clock of another process.'''".

clock_getcpuclockid() is implemented in eglibc source file libc/sysdeps/unix/sysv/linux/clock_getcpuclockid.c, call system call clock_getres() without permission check

|| n/a
|}

===MSG===

====1.3 RC2 20120814 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mq_close/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED ||
'''Stub Case'''

Just print something and then return UNTESTED
|| n/a
|-

|| mq_open/4-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''

Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/25-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/30-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_send/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_timedsend/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_timedsend/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_unlink/2-3 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a
|}

====1.3 20120802 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||mq_timedsend/20-1 || '''Not a bug''' || beagleboard || conformance/interfaces/mq_timedsend/20-1: execution: FAILED
|| Test case passes for single test. It is hardware and time related issue. When the OS in high load, case may fail.
|| n/a
|-
|| mq_close/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED ||
'''Stub Case'''

Just print something and then return UNTESTED
|| n/a
|-

|| mq_open/4-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''

Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/25-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/30-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_send/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_timedsend/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_timedsend/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_unlink/2-3 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a
|}

====1.3 M2 RC1 20120712 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-

|| mq_open/16-1 || Fixed || routerstation|| conformance/interfaces/mq_open/16-1: execution: FAILED || Test cause issue
|| https://bugzilla.yoctoproject.org/show_bug.cgi?id=2886
|-

|| mq_timedreceive/5-2 || '''Fixed''' || mpc8315e routerstation sugarbay blacksand huronriver ||
FAIL: mq_timedreceive didn't block until timout expires
Test FAILED
|| ltp commit 40b04af96e3db7fd8c182159da511d851a9a01a1 on '''Apr 11, 2012''' has fixed this issue. || n/a

|-
|| mq_close/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED ||
'''Stub Case'''

Just print something and then return UNTESTED
|| n/a
|-

|| mq_open/4-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''

Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/25-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/30-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_send/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_timedsend/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_timedsend/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_unlink/2-3 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a
|}

====1.2.1 20120629 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| mq_timedreceive/10-2 || '''Lack of Hardware''' || blacksand || conformance/interfaces/mq_timedreceive/10-2: execution: FAILED

||Lack of Hardware

For comparison, routerstation with kernel-'''3.0.24'''+git1
+34e0d2b4b4e9778b31f9ea99ca43f0dc71a7ee23_1
+982522e3901fad56bb908565b22c498025ab536c-r4.routerstationpro PASS.
|| [https://bugzilla.yoctoproject.org/show_bug.cgi?id=2863 Yocto 2863]
|-

|| mq_timedreceive/5-2 || '''Fixed''' || mpc8315e routerstation sugarbay blacksand ||
FAIL: mq_timedreceive didn't block until timout expires
Test FAILED
|| ltp commit 40b04af96e3db7fd8c182159da511d851a9a01a1 on '''Apr 11, 2012''' has fixed this issue. || n/a

|-
|| mq_close/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED ||
'''Stub Case'''

Just print something and then return UNTESTED
|| n/a
|-

|| mq_open/4-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || '''Stub Case'''

Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/25-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/30-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_send/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_timedsend/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_timedsend/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_unlink/2-3 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a
|}

====1.3 M1 RC1 20120613 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| mq_timedreceive/5-2 || '''Fixed''' || mpc8315e routerstation sugarbay blacksand huronriver ||
FAIL: mq_timedreceive didn't block until timout expires
Test FAILED
|| ltp commit 40b04af96e3db7fd8c182159da511d851a9a01a1 on '''Apr 11, 2012''' has fixed this issue. || n/a

|-
|| mq_close/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED ||
'''Stub Case'''

Just print something and then return UNTESTED
|| n/a
|-

|| mq_open/4-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''

Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/25-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/30-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_send/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_timedsend/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_timedsend/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_unlink/2-3 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a
|}

====1.3 M1 RC1 20120613 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| mq_timedreceive/5-2 || '''Fixed''' || mpc8315e routerstation sugarbay blacksand huronriver ||
FAIL: mq_timedreceive didn't block until timout expires
Test FAILED
|| ltp commit 40b04af96e3db7fd8c182159da511d851a9a01a1 on '''Apr 11, 2012''' has fixed this issue. || n/a

|-
|| mq_close/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED ||
'''Stub Case'''

Just print something and then return UNTESTED
|| n/a
|-

|| mq_open/4-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''

Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/25-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/30-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_send/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_timedsend/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_timedsend/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_unlink/2-3 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a
|}

====1.3 M1 RC1 20120613 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| mq_timedreceive/5-2 || '''Fixed''' || mpc8315e routerstation sugarbay blacksand huronriver ||
FAIL: mq_timedreceive didn't block until timout expires
Test FAILED
|| ltp commit 40b04af96e3db7fd8c182159da511d851a9a01a1 on '''Apr 11, 2012''' has fixed this issue. || n/a

|-
|| mq_close/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED ||
'''Stub Case'''

Just print something and then return UNTESTED
|| n/a
|-

|| mq_open/4-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''

Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/25-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_open/30-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
|| mq_send/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_timedsend/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_timedsend/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a

|-
||mq_unlink/2-3 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || UNTESTED || '''Stub Case'''
Just print something and then return UNTESTED
|| n/a
|}

====1.3 20120606 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
||mq_timedreceive/10-2 || '''Bug''' || sugarbay ||
conformance/interfaces/mq_timedreceive/10-2: execution: FAILED
||

|| n/a
|-
|| mq_timedreceive/5-2 || '''Ignore''' || mpc8315e routerstation sugarbay blacksand ||
FAIL: mq_timedreceive didn't block until timout expires
Test FAILED
|| Time resolution related. If not set CONFIG_HIGH_RES_TIMERS, the case will PASS. But this conflicts with timer_getoverrun/2-3 which needs to set CONFIG_HIGH_RES_TIMERS to make case PASS. || n/a

|-
|| mq_close/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/4-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
|| mq_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
|| mq_open/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/25-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED ||Just print something and then return UNTESTED || n/a

|-
|| mq_open/30-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_send/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
||mq_timedsend/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
||mq_timedsend/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||UNTESTED || Just print something and then return UNTESTED || n/a

|-
||mq_unlink/2-3 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a
|}

====1.2 RC5 Denzil====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
||mq_timedreceive/10-2 || '''Bug''' || sugarbay ||
conformance/interfaces/mq_timedreceive/10-2: execution: FAILED
||

|| n/a
|-
|| mq_timedreceive/5-2 || '''Ignore''' || mpc8315e routerstation sugarbay blacksand ||
FAIL: mq_timedreceive didn't block until timout expires
Test FAILED
|| Time resolution related. If not set CONFIG_HIGH_RES_TIMERS, the case will PASS. But this conflicts with timer_getoverrun/2-3 which needs to set CONFIG_HIGH_RES_TIMERS to make case PASS. || n/a

|-
|| mq_close/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/4-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
|| mq_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
|| mq_open/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/25-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED ||Just print something and then return UNTESTED || n/a

|-
|| mq_open/30-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_send/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
||mq_timedsend/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
||mq_timedsend/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||UNTESTED || Just print something and then return UNTESTED || n/a

|-
||mq_unlink/2-3 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a
|}

====1.2 RC4 Denzil====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
||mq_timedreceive/10-2 || '''Bug''' || sugarbay ||
conformance/interfaces/mq_timedreceive/10-2: execution: FAILED
||

|| n/a
|-
|| mq_timedreceive/5-2 || '''Ignore''' || mpc8315e routerstation sugarbay blacksand ||
FAIL: mq_timedreceive didn't block until timout expires
Test FAILED
|| Time resolution related. If not set CONFIG_HIGH_RES_TIMERS, the case will PASS. But this conflicts with timer_getoverrun/2-3 which needs to set CONFIG_HIGH_RES_TIMERS to make case PASS. || n/a

|-
|| mq_close/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/4-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
|| mq_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
|| mq_open/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/25-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED ||Just print something and then return UNTESTED || n/a

|-
|| mq_open/30-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_send/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
||mq_timedsend/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
||mq_timedsend/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||UNTESTED || Just print something and then return UNTESTED || n/a

|-
||mq_unlink/2-3 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a
|}

====1.2 M4 RC3====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
||mq_timedreceive/10-2 || '''Bug''' || blacksand sugarbay ||
conformance/interfaces/mq_timedreceive/10-2: execution: FAILED
||

|| n/a
|-
|| mq_open/16-1 || NEW || routerstation || conformance/interfaces/mq_open/16-1: execution: FAILED || || n/a

|-
|| mq_timedreceive/5-2 || '''Ignore''' || mpc8315e routerstation sugarbay blacksand ||
FAIL: mq_timedreceive didn't block until timout expires
Test FAILED
|| Time resolution related. If not set CONFIG_HIGH_RES_TIMERS, the case will PASS. But this conflicts with timer_getoverrun/2-3 which needs to set CONFIG_HIGH_RES_TIMERS to make case PASS. || n/a

|-
|| mq_close/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/4-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
|| mq_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
|| mq_open/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/25-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED ||Just print something and then return UNTESTED || n/a

|-
|| mq_open/30-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_send/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
||mq_timedsend/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
||mq_timedsend/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||UNTESTED || Just print something and then return UNTESTED || n/a

|-
||mq_unlink/2-3 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a
|}

====1.2 M4 RC2====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| mq_open/16-1 || NEW || routerstation || conformance/interfaces/mq_open/16-1: execution: FAILED || || n/a

|-
|| mq_timedreceive/5-2 || '''Ignore''' || mpc8315e routerstation sugarbay blacksand ||
FAIL: mq_timedreceive didn't block until timout expires
Test FAILED
|| Time resolution related. If not set CONFIG_HIGH_RES_TIMERS, the case will PASS. But this conflicts with timer_getoverrun/2-3 which needs to set CONFIG_HIGH_RES_TIMERS to make case PASS. || n/a

|-
||mq_timedreceive/10-2 || '''Bug''' || beagleboard routerstation mpc8315e subarbay ||
FAIL: the validity of
abs_timeout is checked
Test FAILED

|| Pass a invalid parameter and when no need to wait mq_timedreceive should not check the timeout value. This is described in IEEE Std 1003.1-2008 POSIX Base Specifications, Issue 7, line 43787-43889.

In linux implementation, mq_timedreceive is defined in ipc/mqueue.c. It will call prepare_timeout() ==> timespec_valid() to validate the parameter abs_timeout before to get the message queue info.

|| n/a

|-
|| mq_close/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/4-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
|| mq_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
|| mq_open/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/25-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED ||Just print something and then return UNTESTED || n/a

|-
|| mq_open/30-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_send/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
||mq_timedsend/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
||mq_timedsend/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||UNTESTED || Just print something and then return UNTESTED || n/a

|-
||mq_unlink/2-3 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a
|}

====1.2 M4 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| mq_timedreceive/5-2 || '''Ignore''' || mpc8315e routerstation sugarbay blacksand ||
FAIL: mq_timedreceive didn't block until timout expires
Test FAILED
|| Time resolution related. If not set CONFIG_HIGH_RES_TIMERS, the case will PASS. But this conflicts with timer_getoverrun/2-3 which needs to set CONFIG_HIGH_RES_TIMERS to make case PASS. || n/a

|-
||mq_timedreceive/10-2 || '''Bug''' || beagleboard routerstation mpc8315e subarbay blacksand ||
FAIL: the validity of
abs_timeout is checked
Test FAILED

|| Pass a invalid parameter and when no need to wait mq_timedreceive should not check the timeout value. This is described in IEEE Std 1003.1-2008 POSIX Base Specifications, Issue 7, line 43787-43889.

In linux implementation, mq_timedreceive is defined in ipc/mqueue.c. It will call prepare_timeout() ==> timespec_valid() to validate the parameter abs_timeout before to get the message queue info.

|| n/a

|-
|| mq_close/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/4-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
|| mq_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
|| mq_open/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/25-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED ||Just print something and then return UNTESTED || n/a

|-
|| mq_open/30-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_send/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
||mq_timedsend/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
||mq_timedsend/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||UNTESTED || Just print something and then return UNTESTED || n/a

|-
||mq_unlink/2-3 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a
|}

====1.2 M3 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| mq_timedreceive/5-2 || '''Ignore''' || mpc8315e routerstation sugarbay blacksand ||
FAIL: mq_timedreceive didn't block until timout expires
Test FAILED
|| Time resolution related. If not set CONFIG_HIGH_RES_TIMERS, the case will PASS. But this conflicts with timer_getoverrun/2-3 which needs to set CONFIG_HIGH_RES_TIMERS to make case PASS. || n/a

|-
||mq_timedreceive/10-2 || '''Bug''' || beagleboard routerstation mpc8315e subarbay blacksand ||
FAIL: the validity of
abs_timeout is checked
Test FAILED

|| Pass a invalid parameter and when no need to wait mq_timedreceive should not check the timeout value. This is described in IEEE Std 1003.1-2008 POSIX Base Specifications, Issue 7, line 43787-43889.

In linux implementation, mq_timedreceive is defined in ipc/mqueue.c. It will call prepare_timeout() ==> timespec_valid() to validate the parameter abs_timeout before to get the message queue info.

|| n/a

|-
|| mq_close/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/4-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
|| mq_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
|| mq_open/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/25-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED ||Just print something and then return UNTESTED || n/a

|-
|| mq_open/30-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_send/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
||mq_timedsend/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
||mq_timedsend/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||UNTESTED || Just print something and then return UNTESTED || n/a

|-
||mq_unlink/2-3 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a
|}

====1.2 M2 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| mq_timedreceive/5-2 || '''Ignore''' || mpc8315e routerstation sugarbay blacksand ||
FAIL: mq_timedreceive didn't block until timout expires
Test FAILED
|| Time resolution related. If not set CONFIG_HIGH_RES_TIMERS, the case will PASS. But this conflicts with timer_getoverrun/2-3 which needs to set CONFIG_HIGH_RES_TIMERS to make case PASS. || n/a

|-
||mq_timedreceive/10-2 || kernel implement issue || beagleboard routerstation mpc8315e subarbay blacksand ||
FAIL: the validity of
abs_timeout is checked
Test FAILED

|| Pass a invalid parameter and when no need to wait mq_timedreceive should not check the timeout value. This is described in IEEE Std 1003.1-2008 POSIX Base Specifications, Issue 7, line 43787-43889.

In linux implementation, mq_timedreceive is defined in ipc/mqueue.c. It will call prepare_timeout() ==> timespec_valid() to validate the parameter abs_timeout before to get the message queue info.

|| n/a

|-
|| mq_close/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/4-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
|| mq_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
|| mq_open/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/25-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_open/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED ||Just print something and then return UNTESTED || n/a

|-
|| mq_open/30-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
|| mq_send/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED|| n/a

|-
||mq_timedsend/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a

|-
||mq_timedsend/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||UNTESTED || Just print something and then return UNTESTED || n/a

|-
||mq_unlink/2-3 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || UNTESTED || Just print something and then return UNTESTED || n/a
|}

====1.2 M1 RC2====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''

|-
|| mq_timedreceive/5-2 || '''Ignore''' || qemu-ppc qemu-mips mpc8315e subarbay blacksand || || The time() can not specifies an abs_timeout to mq_timedreceiver () for preempt_rt kernel || n/a

|-
||mq_timedreceive/10-2 || '''Bug''' || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e subarbay blacksand ||
FAIL: the validity of
abs_timeout is checked
Test FAILED

|| Pass a invalid parameter and when no need to wait mq_timedreceive should not check the timeout value. This is described in IEEE Std 1003.1-2008 POSIX Base Specifications, Issue 7, line 43787-43889.

In linux implementation, mq_timedreceive is defined in ipc/mqueue.c. It will call prepare_timeout() ==> timespec_valid() to validate the parameter abs_timeout before to get the message queue info.

|| n/a

|-
|| mq_timedsend/5-1 || POSIX/Patch send || qemu-ppc qemu-mips ||
Child never interrupted
mq_send() didn't appear
to complete
Test FAILED
|| It fails random, because test case expect parent process sleep first and then child send signal to notify the parent, then the test pass. But the parent doesn't have chance to sleep before the child send the signal. || n/a

|-
|| mq_close/5-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
|| mq_open/4-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
|| mq_open/10-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
|| mq_open/14-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
|| mq_open/17-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
|| mq_open/22-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
|| mq_open/24-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
|| mq_open/25-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
|| mq_open/28-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || ||Just print something and then return || n/a

|-
|| mq_open/30-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
|| mq_send/6-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||mq_timedsend/6-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||mq_timedsend/17-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||mq_unlink/2-3 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a
|}

===TPS===

====1.3 RC2 20120814 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_getparam/6-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || conformance/interfaces/sched_getparam/6-1: execution: '''UNRESOLVED'''
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.

||

|-
||sched_getscheduler/7-1 || '''Not Supportted''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||conformance/interfaces/sched_getscheduler/7-1: execution: '''FAILED'''
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.

|| Similiar with sched_getparam/6-1
|| n/a

|-

||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_getscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/8-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/12-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/13-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/14-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/16-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/18-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
|| sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/9-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/10-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/11-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/13-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/15-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/15-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/22-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a
|}

====1.3 20120802 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_getparam/6-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || conformance/interfaces/sched_getparam/6-1: execution: '''UNRESOLVED'''
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0.
It is a system call and implemented in kernel source sched/core.c. In SYSCALL_DEFINE2(sched_getparam, ...) it calls security_task_getscheduler() to check the permission.
For default security operations, security_task_getscheduler() is a stub function and just return 0.

||

|-
||sched_getscheduler/7-1 || '''Not Supportted''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||conformance/interfaces/sched_getscheduler/7-1: execution: '''FAILED'''
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.

|| Similiar with sched_getparam/6-1
|| n/a

|-

||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_getscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/8-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/12-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/13-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/14-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/16-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/18-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
|| sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/9-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/10-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/11-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/13-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/15-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/15-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/22-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a
|}

====1.3 M2 RC1 20120712 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_getparam/6-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || conformance/interfaces/sched_getparam/6-1: execution: '''UNRESOLVED'''
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0. In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate
privileges (Linux: does not have the
CAP_SYS_NICE capability).

It is obvious that Linux does NOT support this case.
||

|-
||sched_getscheduler/7-1 || '''Not Supportted''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||conformance/interfaces/sched_getscheduler/7-1: execution: '''FAILED'''
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.

|| Similiar with sched_getparam/6-1
|| n/a

|-

||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_getscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/8-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/12-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/13-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/14-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/16-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/18-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
|| sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/9-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/10-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/11-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/13-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/15-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/15-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/22-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a
|}

====1.2.1 20120629 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_getparam/6-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand || conformance/interfaces/sched_getparam/6-1: execution: '''UNRESOLVED'''
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0. In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate
privileges (Linux: does not have the
CAP_SYS_NICE capability).

It is obvious that Linux does NOT support this case.
||

|-
||sched_getscheduler/7-1 || '''Not Supportted''' || beagleboard routerstation mpc8315e sugarbay blacksand ||conformance/interfaces/sched_getscheduler/7-1: execution: '''FAILED'''
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.

|| Similiar with sched_getparam/6-1
|| n/a

|-

||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_getscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/8-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/12-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/13-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/14-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/16-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/18-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
|| sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/9-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/10-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/11-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/13-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/22-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a
|}

====1.3 M1 RC1 20120613 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_getparam/6-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || conformance/interfaces/sched_getparam/6-1: execution: '''UNRESOLVED'''
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
||
This case try to call sched_getparam as non-root user to get scheduling parameters of process with pid 0. In the manual of sched_getparam about return value:
EPERM The calling process does not have appropriate
privileges (Linux: does not have the
CAP_SYS_NICE capability).

It is obvious that Linux does NOT support this case.
||

|-
||sched_getscheduler/7-1 || '''Not Supportted''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||conformance/interfaces/sched_getscheduler/7-1: execution: '''FAILED'''
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.

|| Similiar with sched_getparam/6-1
|| n/a

|-

||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_getscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/8-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/12-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/13-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/14-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/16-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/18-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
|| sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/9-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/10-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/11-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/13-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/15-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/15-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a

|-
||sched_setscheduler/22-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || Just print something and then return || n/a
|}

====1.3 20120606 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_getparam/6-1 || '''Ignore''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
|| sched_getparam is a system call, and defined in kernel/sched/core.c:L4266. It calls security_task_getscheduler() ==> security_ops->task_getscheduler() to perform security check. Default security policy is "Unix Discretionary Access Control". Its task_getscheduler() refer to cap_task_getscheduler() and doesn't perform any permission check.
WR: A permission test. On Linux, the kernel makes no check on
user permission to call this API. So basically we don't know
on what condition a system should return EPERM.
It is implementation defined.
||

|-
||sched_getscheduler/7-1 || '''Ignore''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.

|| Same with sched_getparam/6-1
WR: A permission test. On Linux, the kernel
makes no check on user permission to call
this API. So basically we don't know on what
condition a system should return EPERM.
It is implementation defined.

|| n/a

|-

||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_getscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/8-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/12-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/13-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/14-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/16-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/18-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
|| sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/9-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/10-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/11-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/13-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/22-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a
|}

====1.2 RC5 Denzil====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_getparam/6-1 || '''Ignore''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
|| sched_getparam is a system call, and defined in kernel/sched/core.c:L4266. It calls security_task_getscheduler() ==> security_ops->task_getscheduler() to perform security check. Default security policy is "Unix Discretionary Access Control". Its task_getscheduler() refer to cap_task_getscheduler() and doesn't perform any permission check.
WR: A permission test. On Linux, the kernel makes no check on
user permission to call this API. So basically we don't know
on what condition a system should return EPERM.
It is implementation defined.
||

|-
||sched_getscheduler/7-1 || '''Ignore''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.

|| Same with sched_getparam/6-1
WR: A permission test. On Linux, the kernel
makes no check on user permission to call
this API. So basically we don't know on what
condition a system should return EPERM.
It is implementation defined.

|| n/a

|-

||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_getscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/8-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/12-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/13-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/14-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/16-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/18-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
|| sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/9-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/10-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/11-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/13-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/22-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a
|}

====1.2 RC4 Denzil====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_getparam/6-1 || '''Ignore''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
|| sched_getparam is a system call, and defined in kernel/sched/core.c:L4266. It calls security_task_getscheduler() ==> security_ops->task_getscheduler() to perform security check. Default security policy is "Unix Discretionary Access Control". Its task_getscheduler() refer to cap_task_getscheduler() and doesn't perform any permission check.
WR: A permission test. On Linux, the kernel makes no check on
user permission to call this API. So basically we don't know
on what condition a system should return EPERM.
It is implementation defined.
||

|-
||sched_getscheduler/7-1 || '''Ignore''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.

|| Same with sched_getparam/6-1
WR: A permission test. On Linux, the kernel
makes no check on user permission to call
this API. So basically we don't know on what
condition a system should return EPERM.
It is implementation defined.

|| n/a

|-

||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_getscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/8-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/12-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/13-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/14-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/16-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/18-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
|| sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/9-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/10-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/11-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/13-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/22-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a
|}

====1.2 M4 RC3====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sched_setparam/9-1 || NEW || blacksand || conformance/interfaces/sched_setparam/9-1: execution: FAILED || || n/a
|-
||sched_getparam/6-1 || '''Ignore''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
|| sched_getparam is a system call, and defined in kernel/sched/core.c:L4266. It calls security_task_getscheduler() ==> security_ops->task_getscheduler() to perform security check. Default security policy is "Unix Discretionary Access Control". Its task_getscheduler() refer to cap_task_getscheduler() and doesn't perform any permission check.
WR: A permission test. On Linux, the kernel makes no check on
user permission to call this API. So basically we don't know
on what condition a system should return EPERM.
It is implementation defined.
||

|-
||sched_getscheduler/7-1 || '''Ignore''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.

|| Same with sched_getparam/6-1
WR: A permission test. On Linux, the kernel
makes no check on user permission to call
this API. So basically we don't know on what
condition a system should return EPERM.
It is implementation defined.

|| n/a

|-

||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_getscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/8-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/12-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/13-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/14-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/16-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/18-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
|| sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/9-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/10-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/11-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/13-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/22-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a
|}

====1.2 M4 RC2====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
||sched_getparam/6-1 || '''Ignore''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
|| sched_getparam is a system call, and defined in kernel/sched/core.c:L4266. It calls security_task_getscheduler() ==> security_ops->task_getscheduler() to perform security check. Default security policy is "Unix Discretionary Access Control". Its task_getscheduler() refer to cap_task_getscheduler() and doesn't perform any permission check.
WR: A permission test. On Linux, the kernel makes no check on
user permission to call this API. So basically we don't know
on what condition a system should return EPERM.
It is implementation defined.
||

|-
||sched_getscheduler/7-1 || '''Ignore''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.

|| Same with sched_getparam/6-1
WR: A permission test. On Linux, the kernel
makes no check on user permission to call
this API. So basically we don't know on what
condition a system should return EPERM.
It is implementation defined.

|| n/a

|-

||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_getscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/8-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/12-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/13-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/14-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/16-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/18-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
|| sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/9-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/10-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/11-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/13-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/22-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a
|}

====1.2 M4 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sched_setparam/9-1 || || blacksand || conformance/interfaces/sched_setparam/9-1: execution: FAILED || || n/a
|-
||sched_getparam/6-1 || '''Ignore''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
|| sched_getparam is a system call, and defined in kernel/sched/core.c:L4266. It calls security_task_getscheduler() ==> security_ops->task_getscheduler() to perform security check. Default security policy is "Unix Discretionary Access Control". Its task_getscheduler() refer to cap_task_getscheduler() and doesn't perform any permission check.
WR: A permission test. On Linux, the kernel makes no check on
user permission to call this API. So basically we don't know
on what condition a system should return EPERM.
It is implementation defined.
||

|-
||sched_getscheduler/7-1 || '''Ignore''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.

|| Same with sched_getparam/6-1
WR: A permission test. On Linux, the kernel
makes no check on user permission to call
this API. So basically we don't know on what
condition a system should return EPERM.
It is implementation defined.

|| n/a

|-

||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_getscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/8-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/12-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/13-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/14-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/16-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/18-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
|| sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/9-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/10-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/11-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/13-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/22-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a
|}

====1.2 M3 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sched_setparam/9-1 || || blacksand || conformance/interfaces/sched_setparam/9-1: execution: FAILED || || n/a
|-
||sched_getparam/6-1 || '''Ignore''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
|| sched_getparam is a system call, and defined in kernel/sched/core.c:L4266. It calls security_task_getscheduler() ==> security_ops->task_getscheduler() to perform security check. Default security policy is "Unix Discretionary Access Control". Its task_getscheduler() refer to cap_task_getscheduler() and doesn't perform any permission check.
WR: A permission test. On Linux, the kernel makes no check on
user permission to call this API. So basically we don't know
on what condition a system should return EPERM.
It is implementation defined.
||

|-
||sched_getscheduler/7-1 || '''Ignore''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.

|| Same with sched_getparam/6-1
WR: A permission test. On Linux, the kernel
makes no check on user permission to call
this API. So basically we don't know on what
condition a system should return EPERM.
It is implementation defined.

|| n/a

|-

||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_getscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/8-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/12-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/13-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/14-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/16-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/18-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
|| sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/9-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/10-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/11-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/13-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/22-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a
|}

====1.2 M2 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sched_setparam/9-1 || || blacksand || conformance/interfaces/sched_setparam/9-1: execution: FAILED || || n/a
|-
||sched_getparam/6-1 || '''Ignore''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
|| sched_getparam is a system call, and defined in kernel/sched/core.c:L4266. It calls security_task_getscheduler() ==> security_ops->task_getscheduler() to perform security check. Default security policy is "Unix Discretionary Access Control". Its task_getscheduler() refer to cap_task_getscheduler() and doesn't perform any permission check.
WR: A permission test. On Linux, the kernel makes no check on
user permission to call this API. So basically we don't know
on what condition a system should return EPERM.
It is implementation defined.
||

|-
||sched_getscheduler/7-1 || '''Ignore''' || beagleboard routerstation mpc8315e sugarbay blacksand ||
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.

|| Same with sched_getparam/6-1
WR: A permission test. On Linux, the kernel
makes no check on user permission to call
this API. So basically we don't know on what
condition a system should return EPERM.
It is implementation defined.

|| n/a

|-
||sched_yield/1-1 || Bug / Fixed || routerstation mpc8315e beagleboard || || SIGINT is trapped by bin/run-test.sh || n/a

|-
||sched_get_priority_max/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_get_priority_min/1-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_getscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/8-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/12-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/13-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/14-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/15-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/16-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/17-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/18-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/20-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/23-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
|| sched_setparam/23-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-5 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/5-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/9-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/10-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/11-1 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/13-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/14-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/17-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-2 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-3 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-4 || Ignore || beagleboard routerstation mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/22-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/22-2 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || Just print something and then return || n/a
|}

====1.2 M1 RC2====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| sched_setparam/9-1 || || blacksand || conformance/interfaces/sched_setparam/9-1: execution: FAILED || || n/a
|-
|| sched_setscheduler/17-5 || POSIX || sugarbay blacksand || conformance/interfaces/sched_setscheduler/17-5: execution: UNRESOLVED || Test next milestion with new version POSIX suite. || n/a
|-
||sched_getparam/6-1 || '''Ignore''' || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand ||
Testing with user deamon (euid, uid) = (1, 1)
The function sched_getparam has successed.
|| Call sched_getparam() to get process init as non-root user succeed unexpectedly.
sched_getparam is a system call, and defined in kernel/sched.c:L5510. It calls security_task_getscheduler() ==> security_ops->task_getscheduler() to perform security check. Default security policy is "Unix Discretionary Access Control". Its task_getscheduler() refer to cap_task_getscheduler() and doesn't perform any permission check.
WR: A permission test. On Linux, the kernel makes no check on
user permission to call this API. So basically we don't know
on what condition a system should return EPERM.
It is implementation defined.
||

|-
||sched_getscheduler/7-1 || '''Ignore''' || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand ||
Testing with user deamon (uid: 1)
The function sched_getscheduler has successed.
|| Same with sched_getparam/6-1
WR: A permission test. On Linux, the kernel
makes no check on user permission to call
this API. So basically we don't know on what
condition a system should return EPERM.
It is implementation defined.

|| n/a

|-
||sched_yield/1-1 || Bug / Fixed || qemu-arm qemu-mips routerstation qemu-ppc mpc8315e beagleboard || || SIGINT is trapped by bin/run-test.sh || n/a

|-
||sched_get_priority_max/1-3 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_get_priority_min/1-3 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_getscheduler/2-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/3-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/6-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/7-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/8-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/12-1 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/13-1 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/14-1 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/15-1 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/16-1 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/17-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/18-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/19-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setparam/20-1 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-1 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/21-2 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || PTHREAD_SCOPE_PROCESS for pthread_attr_setscope() is not supported by linux || n/a

|-
||sched_setparam/23-2 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
|| sched_setparam/23-3 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-4 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/23-5 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-2 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-3 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setparam/25-4 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/2-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/5-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/6-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/7-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/9-1 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/10-1 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/11-1 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/12-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/13-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/14-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/15-2 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/17-2 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-3 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/17-4 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-2 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-3 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/19-4 || Ignore || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Schedule policy SCHED_SPORADIC is not supported by linux || n/a

|-
||sched_setscheduler/22-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a

|-
||sched_setscheduler/22-2 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || Just print something and then return || n/a
|}

===MEM===

====1.3 RC2 20120814 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/11-4 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.

Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.

The mapped page is cached. This case is not supported by Linux.

mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
|| n/a

|-
|| mmap/11-5 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
Modification of the partial page
at the end of an object is written out
|| Same with mmap/11-4, and this case test share memory instead of regular file.

shmfs's file->f_op->mmap() point to shm_fault() in ipc/shm.c, then it call shmem_fault() ==> shmem_getpage() ==> shmem_getpage_gfp() ==> find_lock_page(). In find_lock_page() it will search the desired pagecache page.
|| n/a

|-
|| mmap/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || This case try to test implement which doesn't support flag MAP_FIXED. eglibc supports this flag so the case quits with UNTESTED || n/a

|-
|| mmap/28-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
Test Fail: mmap/28-1.c Got no error at mmap()
|| This case tests mmap() with length of 2 timed file size and expects fail with errno ENXIO( No such device or address), but mmap() successed.

Because Linux kernel just make the mmap connection between file and memory when mmap() called. When first read/write, the kernel mmap the physical file page to the virtual memory page. So it doesn't fail in mmap().

This case is NOT supported by Linux.
|| n/a

|-
|| mmap/31-1 || POSIX || mpc8315e beagleboard sugarbay blacksand huronriver ||

off: fffff000, len: fffff000

expect EOVERFLOW but get other error: Cannot allocate memory

|| Parameters lenth and offset for mmap() are too large. Case 24-2 with same length expects mmap() failed with ENOMEM.

In function get_unmapped_area(), it checks len should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value on different platforms
beagleboard 0xC0000000 - 0x01000000 = 0xBF000000
mpc8315e 0xc0000000
routerstation 0x7fff8000UL
sugarbay 0xffff880000000000
|| n/a

|-
|| shm_open/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/9-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || ||test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/29-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/36-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/42-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a
|}

====1.3 20120802 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/11-4 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.

Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.

The mapped page is cached. This case is not supported by Linux.

mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
|| n/a

|-
|| mmap/11-5 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
Modification of the partial page
at the end of an object is written out
|| Same with mmap/11-4, and this case test share memory instead of regular file.

shmfs's file->f_op->mmap() point to shm_fault() in ipc/shm.c, then it call shmem_fault() ==> shmem_getpage() ==> shmem_getpage_gfp() ==> find_lock_page(). In find_lock_page() it will search the desired pagecache page.
|| n/a

|-
|| mmap/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || This case try to test implement which doesn't support flag MAP_FIXED. eglibc supports this flag so the case quits with UNTESTED || n/a

|-
|| mmap/28-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
Test Fail: mmap/28-1.c Got no error at mmap()
|| This case tests mmap() with length of 2 timed file size and expects fail with errno ENXIO( No such device or address), but mmap() successed.

Because Linux kernel just make the mmap connection between file and memory when mmap() called. When first read/write, the kernel mmap the physical file page to the virtual memory page. So it doesn't fail in mmap().

This case is NOT supported by Linux.
|| n/a

|-
|| mmap/31-1 || POSIX || mpc8315e beagleboard sugarbay blacksand huronriver ||

off: fffff000, len: fffff000

expect EOVERFLOW but get other error: Cannot allocate memory

|| Parameters lenth and offset for mmap() are too large. Case 24-2 with same length expects mmap() failed with ENOMEM.

In function get_unmapped_area(), it checks len should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value on different platforms
beagleboard 0xC0000000 - 0x01000000 = 0xBF000000
mpc8315e 0xc0000000
routerstation 0x7fff8000UL
sugarbay 0xffff880000000000
|| n/a

|-
|| shm_open/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/9-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || ||test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/29-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/36-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/42-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a
|}

====1.3 M2 RC1 20120712 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/11-4 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.

Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.

The mapped page is cached. This case is not supported by Linux.

mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
|| n/a

|-
|| mmap/11-5 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
Modification of the partial page
at the end of an object is written out
|| Same with mmap/11-4, and this case test share memory instead of regular file.

shmfs's file->f_op->mmap() point to shm_fault() in ipc/shm.c, then it call shmem_fault() ==> shmem_getpage() ==> shmem_getpage_gfp() ==> find_lock_page(). In find_lock_page() it will search the desired pagecache page.
|| n/a

|-
|| mmap/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || This case try to test implement which doesn't support flag MAP_FIXED. eglibc supports this flag so the case quits with UNTESTED || n/a

|-
|| mmap/28-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
Test Fail: mmap/28-1.c Got no error at mmap()
|| This case tests mmap() with length of 2 timed file size and expects fail with errno ENXIO( No such device or address), but mmap() successed.

Because Linux kernel just make the mmap connection between file and memory when mmap() called. When first read/write, the kernel mmap the physical file page to the virtual memory page. So it doesn't fail in mmap().

This case is NOT supported by Linux.
|| n/a

|-
|| mmap/31-1 || POSIX || mpc8315e beagleboard sugarbay blacksand huronriver ||

off: fffff000, len: fffff000

expect EOVERFLOW but get other error: Cannot allocate memory

|| Parameters lenth and offset for mmap() are too large. Case 24-2 with same length expects mmap() failed with ENOMEM.

In function get_unmapped_area(), it checks len should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value on different platforms
beagleboard 0xC0000000 - 0x01000000 = 0xBF000000
mpc8315e 0xc0000000
routerstation 0x7fff8000UL
sugarbay 0xffff880000000000
|| n/a

|-
|| shm_open/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/9-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || ||test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/29-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/36-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/42-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a
|}

====1.2.1 20120629 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mlockall/3-6 || Fixed || routerstation || conformance/interfaces/mlockall/3-6: execution: FAILED ||
I have push fix to yocto/standard/routerstationpro with commit 220d89fcf345ee28fb0cdcf0f33f83b3dc7c460f, but 1.2.1 doesn't include it. I don't know the reason.
||
|-

|| mlockall/3-7 || Fixed || routerstation || conformance/interfaces/mlockall/3-7: execution: FAILED ||
Same with mlockall/3-6
||
|-

|| mmap/11-4 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
pa: 0x400fb000

pa_2: 0x40115000

Modification of the partial page at the end of an object is written out
|| Test case map a file with size of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'. Test on all platforms are failed. The reason is after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.

The mapped page is cached.

mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
|| n/a

|-
|| mmap/11-5 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || Modification of the partial page at the end of an object is written out || Same with mmap/11-4, and this test case is to test share memory, so file->f_op->mmap() point to shm_fault() in ipc/shm.c, then it call shmem_fault() ==> shmem_getpage() ==> shmem_getpage_gfp() ==> find_lock_page(). In find_lock_page() it will search the desired pagecache page. || n/a

|-
|| mmap/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || eglibc has define macro MAP_FIXED, and test case check MAP_FIXED defined then quit with PTS_UNTESTED || n/a

|-
|| mmap/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test mmap() with length 2 timed file size expect fail with errno ENXIO( No such device or address) but successed. || n/a

|-
|| mmap/31-1 || POSIX || mpc8315e beagleboard sugarbay blacksand huronriver ||

off: fffff000, len: fffff000

expect EOVERFLOW but get other error: Cannot allocate memory

|| Parameters lenth and offset for mmap() are too large. Case 24-2 with same length expects mmap() failed with ENOMEM.

In function get_unmapped_area(), it checks len should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value on different platforms
beagleboard 0xC0000000 - 0x01000000 = 0xBF000000
mpc8315e 0xc0000000
routerstation 0x7fff8000UL
sugarbay 0xffff880000000000
|| n/a

|-
|| shm_open/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/9-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || ||test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/29-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/36-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/42-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a
|}

====1.3 M1 RC1 20120613 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/11-4 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
pa: 0x400fb000
pa_2: 0x40115000
Modification of the partial page
at the end of an object is written out
|| This case maps a file with length of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'.

Test on all platforms are failed. The root cause is that after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.

The mapped page is cached. This case is not supported by Linux.

mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
|| n/a

|-
|| mmap/11-5 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
Modification of the partial page
at the end of an object is written out
|| Same with mmap/11-4, and this case test share memory instead of regular file.

shmfs's file->f_op->mmap() point to shm_fault() in ipc/shm.c, then it call shmem_fault() ==> shmem_getpage() ==> shmem_getpage_gfp() ==> find_lock_page(). In find_lock_page() it will search the desired pagecache page.
|| n/a

|-
|| mmap/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || This case try to test implement which doesn't support flag MAP_FIXED. eglibc supports this flag so the case quits with UNTESTED || n/a

|-
|| mmap/28-1 || '''Not Supported''' || beagleboard routerstation mpc8315e sugarbay blacksand huronriver ||
Test Fail: mmap/28-1.c Got no error at mmap()
|| This case tests mmap() with length of 2 timed file size and expects fail with errno ENXIO( No such device or address), but mmap() successed.

Because Linux kernel just make the mmap connection between file and memory when mmap() called. When first read/write, the kernel mmap the physical file page to the virtual memory page. So it doesn't fail in mmap().

This case is NOT supported by Linux.
|| n/a

|-
|| mmap/31-1 || POSIX || mpc8315e beagleboard sugarbay blacksand huronriver ||

off: fffff000, len: fffff000

expect EOVERFLOW but get other error: Cannot allocate memory

|| Parameters lenth and offset for mmap() are too large. Case 24-2 with same length expects mmap() failed with ENOMEM.

In function get_unmapped_area(), it checks len should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value on different platforms
beagleboard 0xC0000000 - 0x01000000 = 0xBF000000
mpc8315e 0xc0000000
routerstation 0x7fff8000UL
sugarbay 0xffff880000000000
|| n/a

|-
|| shm_open/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/9-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || ||test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/29-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/36-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/42-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand huronriver || || test code just return PTS_UNTESTED and do nothing || n/a
|}

====1.3 20120606 build====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/11-4 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||
pa: 0x400fb000

pa_2: 0x40115000

Modification of the partial page at the end of an object is written out
|| Test case map a file with size of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'. Test on all platforms are failed. The reason is after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.

The mapped page is cached.

mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
|| n/a

|-
|| mmap/11-5 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || Modification of the partial page at the end of an object is written out || Same with mmap/11-4, and this test case is to test share memory, so file->f_op->mmap() point to shm_fault() in ipc/shm.c, then it call shmem_fault() ==> shmem_getpage() ==> shmem_getpage_gfp() ==> find_lock_page(). In find_lock_page() it will search the desired pagecache page. || n/a

|-
|| mmap/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || eglibc has define macro MAP_FIXED, and test case check MAP_FIXED defined then quit with PTS_UNTESTED || n/a

|-
|| mmap/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test mmap() with length 2 timed file size expect fail with errno ENXIO( No such device or address) but successed. || n/a

|-
|| mmap/31-1 || POSIX || mpc8315e beagleboard sugarbay blacksand ||

off: fffff000, len: fffff000

expect EOVERFLOW but get other error: Cannot allocate memory

|| Parameters lenth and offset for mmap() are too large. Case 24-2 with same length expects mmap() failed with ENOMEM.

In function get_unmapped_area(), it checks len should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value on different platforms
beagleboard 0xC0000000 - 0x01000000 = 0xBF000000
mpc8315e 0xc0000000
routerstation 0x7fff8000UL
sugarbay 0xffff880000000000
|| n/a

|-
|| shm_open/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/9-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || ||test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/29-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/36-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/42-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a
|}

====1.2 RC5 Denzil====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mlockall/3-6 || Fixed || routerstation || conformance/interfaces/mlockall/3-6: execution: FAILED || Test on board router_staion-1, failed by using USB sotrage. POSIX version: 20120104

It caused by patch for Yocto 1429, and send patch to fix it. Merged to Yocto routerstation branch.

commit 59c28f7ef99fcea4c7979dde0df650b167da36b9 on Apr 25, 2012

|| n/a

|-
|| mlockall/3-7 || Fixed || routerstation || conformance/interfaces/mlockall/3-7: execution: FAILED || Test on board router_staion-1, failed by using USB sotrage. POSIX version: 20120104

Same with 3-6
|| n/a

|-
|| mmap/11-4 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||
pa: 0x400fb000

pa_2: 0x40115000

Modification of the partial page at the end of an object is written out
|| Test case map a file with size of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'. Test on all platforms are failed. The reason is after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.

The mapped page is cached.

mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
|| n/a

|-
|| mmap/11-5 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || Modification of the partial page at the end of an object is written out || Same with mmap/11-4, and this test case is to test share memory, so file->f_op->mmap() point to shm_fault() in ipc/shm.c, then it call shmem_fault() ==> shmem_getpage() ==> shmem_getpage_gfp() ==> find_lock_page(). In find_lock_page() it will search the desired pagecache page. || n/a

|-
|| mmap/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || eglibc has define macro MAP_FIXED, and test case check MAP_FIXED defined then quit with PTS_UNTESTED || n/a

|-
|| mmap/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test mmap() with length 2 timed file size expect fail with errno ENXIO( No such device or address) but successed. || n/a

|-
|| mmap/31-1 || POSIX || mpc8315e beagleboard sugarbay blacksand ||

off: fffff000, len: fffff000

expect EOVERFLOW but get other error: Cannot allocate memory

|| Parameters lenth and offset for mmap() are too large. Case 24-2 with same length expects mmap() failed with ENOMEM.

In function get_unmapped_area(), it checks len should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value on different platforms
beagleboard 0xC0000000 - 0x01000000 = 0xBF000000
mpc8315e 0xc0000000
routerstation 0x7fff8000UL
sugarbay 0xffff880000000000
|| n/a

|-
|| shm_open/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/9-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || ||test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/29-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/36-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/42-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a
|}

====1.2 RC4 Denzil====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mlockall/3-6 || Fixed || routerstation || conformance/interfaces/mlockall/3-6: execution: FAILED || Test on board router_staion-1, failed by using USB sotrage. POSIX version: 20120104

It caused by patch for Yocto 1429, and send patch to fix it. Merged to Yocto routerstation branch.

commit 59c28f7ef99fcea4c7979dde0df650b167da36b9 on Apr 25, 2012

|| n/a

|-
|| mlockall/3-7 || Fixed || routerstation || conformance/interfaces/mlockall/3-7: execution: FAILED || Test on board router_staion-1, failed by using USB sotrage. POSIX version: 20120104

Same with 3-6
|| n/a

|-
|| mmap/11-4 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||
pa: 0x400fb000

pa_2: 0x40115000

Modification of the partial page at the end of an object is written out
|| Test case map a file with size of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'. Test on all platforms are failed. The reason is after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.

The mapped page is cached.

mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
|| n/a

|-
|| mmap/11-5 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || Modification of the partial page at the end of an object is written out || Same with mmap/11-4, and this test case is to test share memory, so file->f_op->mmap() point to shm_fault() in ipc/shm.c, then it call shmem_fault() ==> shmem_getpage() ==> shmem_getpage_gfp() ==> find_lock_page(). In find_lock_page() it will search the desired pagecache page. || n/a

|-
|| mmap/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || eglibc has define macro MAP_FIXED, and test case check MAP_FIXED defined then quit with PTS_UNTESTED || n/a

|-
|| mmap/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test mmap() with length 2 timed file size expect fail with errno ENXIO( No such device or address) but successed. || n/a

|-
|| mmap/31-1 || POSIX || mpc8315e beagleboard sugarbay blacksand ||

off: fffff000, len: fffff000

expect EOVERFLOW but get other error: Cannot allocate memory

|| Parameters lenth and offset for mmap() are too large. Case 24-2 with same length expects mmap() failed with ENOMEM.

In function get_unmapped_area(), it checks len should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value on different platforms
beagleboard 0xC0000000 - 0x01000000 = 0xBF000000
mpc8315e 0xc0000000
routerstation 0x7fff8000UL
sugarbay 0xffff880000000000
|| n/a

|-
|| shm_open/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/9-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || ||test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/29-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/36-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/42-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a
|}

====1.2 M4 RC3====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mlockall/3-6 || Fixed || routerstation || conformance/interfaces/mlockall/3-6: execution: FAILED || Test on board router_staion-1, failed by using USB sotrage. POSIX version: 20120104

It caused by patch for Yocto 1429, and send patch to fix it. Merged to Yocto routerstation branch.

commit 59c28f7ef99fcea4c7979dde0df650b167da36b9 on Apr 25, 2012

|| n/a

|-
|| mlockall/3-7 || Fixed || routerstation || conformance/interfaces/mlockall/3-7: execution: FAILED || Test on board router_staion-1, failed by using USB sotrage. POSIX version: 20120104

Same with 3-6
|| n/a

|-
|| mmap/11-4 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||
pa: 0x400fb000

pa_2: 0x40115000

Modification of the partial page at the end of an object is written out
|| Test case map a file with size of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'. Test on all platforms are failed. The reason is after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.

The mapped page is cached.

mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
|| n/a

|-
|| mmap/11-5 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || Modification of the partial page at the end of an object is written out || Same with mmap/11-4, and this test case is to test share memory, so file->f_op->mmap() point to shm_fault() in ipc/shm.c, then it call shmem_fault() ==> shmem_getpage() ==> shmem_getpage_gfp() ==> find_lock_page(). In find_lock_page() it will search the desired pagecache page. || n/a

|-
|| mmap/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || eglibc has define macro MAP_FIXED, and test case check MAP_FIXED defined then quit with PTS_UNTESTED || n/a

|-
|| mmap/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test mmap() with length 2 timed file size expect fail with errno ENXIO( No such device or address) but successed. || n/a

|-
|| mmap/31-1 || POSIX || mpc8315e beagleboard sugarbay blacksand ||

off: fffff000, len: fffff000

expect EOVERFLOW but get other error: Cannot allocate memory

|| Parameters lenth and offset for mmap() are too large. Case 24-2 with same length expects mmap() failed with ENOMEM.

In function get_unmapped_area(), it checks len should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value on different platforms
beagleboard 0xC0000000 - 0x01000000 = 0xBF000000
mpc8315e 0xc0000000
routerstation 0x7fff8000UL
sugarbay 0xffff880000000000
|| n/a

|-
|| shm_open/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/9-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || ||test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/29-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/36-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/42-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a
|}

====1.2 M4 RC2====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mlockall/3-6 || Fixed || routerstation || conformance/interfaces/mlockall/3-6: execution: FAILED || Test on board router_staion-1, failed by using USB sotrage. POSIX version: 20120104

It caused by patch for Yocto 1429, and send patch to fix it. Merged to Yocto routerstation branch.

commit 59c28f7ef99fcea4c7979dde0df650b167da36b9 on Apr 25, 2012

|| n/a

|-
|| mlockall/3-7 || Fixed || routerstation || conformance/interfaces/mlockall/3-7: execution: FAILED || Test on board router_staion-1, failed by using USB sotrage. POSIX version: 20120104

Same with 3-6

|| n/a

|-
|| mmap/11-4 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||
pa: 0x400fb000

pa_2: 0x40115000

Modification of the partial page at the end of an object is written out
|| Test case map a file with size of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'. Test on all platforms are failed. The reason is after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.

The mapped page is cached.

mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
|| n/a

|-
|| mmap/11-5 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || Modification of the partial page at the end of an object is written out || Same with mmap/11-4, and this test case is to test share memory, so file->f_op->mmap() point to shm_fault() in ipc/shm.c, then it call shmem_fault() ==> shmem_getpage() ==> shmem_getpage_gfp() ==> find_lock_page(). In find_lock_page() it will search the desired pagecache page. || n/a

|-
|| mmap/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || eglibc has define macro MAP_FIXED, and test case check MAP_FIXED defined then quit with PTS_UNTESTED || n/a

|-
|| mmap/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test mmap() with length 2 timed file size expect fail with errno ENXIO( No such device or address) but successed. || n/a

|-
|| mmap/31-1 || POSIX || mpc8315e beagleboard sugarbay blacksand ||

off: fffff000, len: fffff000

expect EOVERFLOW but get other error: Cannot allocate memory

|| Parameters lenth and offset for mmap() are too large. Case 24-2 with same length expects mmap() failed with ENOMEM.

In function get_unmapped_area(), it checks len should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value on different platforms
beagleboard 0xC0000000 - 0x01000000 = 0xBF000000
mpc8315e 0xc0000000
routerstation 0x7fff8000UL
sugarbay 0xffff880000000000
|| n/a

|-
|| shm_open/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/9-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || ||test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/29-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/36-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/42-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a
|}

====1.2 M4 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mlockall/3-6 || Fixed || routerstation || conformance/interfaces/mlockall/3-6: execution: FAILED || Test on board router_staion-1, failed by using USB sotrage. POSIX version: 20120104

It caused by patch for Yocto 1429, and send patch to fix it. Merged to Yocto routerstation branch.

commit 59c28f7ef99fcea4c7979dde0df650b167da36b9 on Apr 25, 2012

|| n/a

|-
|| mlockall/3-7 || Fixed || routerstation || conformance/interfaces/mlockall/3-7: execution: FAILED || Test on board router_staion-1, failed by using USB sotrage. POSIX version: 20120104

Same with 3-6
|| n/a

|-
|| mmap/11-4 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||
pa: 0x400fb000

pa_2: 0x40115000

Modification of the partial page at the end of an object is written out
|| Test case map a file with size of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'. Test on all platforms are failed. The reason is after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.

The mapped page is cached.

mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
|| n/a

|-
|| mmap/11-5 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || Modification of the partial page at the end of an object is written out || Same with mmap/11-4, and this test case is to test share memory, so file->f_op->mmap() point to shm_fault() in ipc/shm.c, then it call shmem_fault() ==> shmem_getpage() ==> shmem_getpage_gfp() ==> find_lock_page(). In find_lock_page() it will search the desired pagecache page. || n/a

|-
|| mmap/27-1 || POSIX/Not A Bug || beagleboard routerstation mpc8315e sugarbay blacksand ||
Test Untested: MAP_FIXED defined
|| The case requires that macros MAP_FIXED, MAP_SHARED, PROT_WRITE, PROT_READ are not defined. eglibc has defined them, so the test cases quit with PTS_UNTESTED || n/a

|-
|| mmap/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test mmap() with length 2 timed file size expect fail with errno ENXIO( No such device or address) but successed. || n/a

|-
|| mmap/31-1 || POSIX || mpc8315e beagleboard sugarbay blacksand ||

off: fffff000, len: fffff000

expect EOVERFLOW but get other error: Cannot allocate memory

|| Parameters lenth and offset for mmap() are too large. Case 24-2 with same length expects mmap() failed with ENOMEM.

In function get_unmapped_area(), it checks len should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value on different platforms
beagleboard 0xC0000000 - 0x01000000 = 0xBF000000
mpc8315e 0xc0000000
routerstation 0x7fff8000UL
sugarbay 0xffff880000000000
|| n/a

|-
|| shm_open/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/9-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || ||test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/29-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/36-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/42-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a
|}

====1.2 M3 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mlockall/3-6 || NEW --> Ignore || routerstation || conformance/interfaces/mlockall/3-6: execution: FAILED || Test on board router_staion-2 about 30 times, no fails. POSIX version: 20120104 || n/a

|-
|| mlockall/3-7 || NEW --> Ignore || routerstation || conformance/interfaces/mlockall/3-7: execution: FAILED || Test on board router_staion-2 about 30 times, no fails. POSIX version: 20120104 || n/a

|-
|| mmap/11-4 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||
pa: 0x400fb000

pa_2: 0x40115000

Modification of the partial page at the end of an object is written out
|| Test case map a file with size of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'. Test on all platforms are failed. The reason is after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.

The mapped page is cached.

mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
|| n/a

|-
|| mmap/11-5 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || Modification of the partial page at the end of an object is written out || Same with mmap/11-4, and this test case is to test share memory, so file->f_op->mmap() point to shm_fault() in ipc/shm.c, then it call shmem_fault() ==> shmem_getpage() ==> shmem_getpage_gfp() ==> find_lock_page(). In find_lock_page() it will search the desired pagecache page. || n/a

|-
|| mmap/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || eglibc has define macro MAP_FIXED, and test case check MAP_FIXED defined then quit with PTS_UNTESTED || n/a

|-
|| mmap/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test mmap() with length 2 timed file size expect fail with errno ENXIO( No such device or address) but successed. || n/a

|-
|| mmap/31-1 || POSIX || mpc8315e beagleboard sugarbay blacksand ||

off: fffff000, len: fffff000

expect EOVERFLOW but get other error: Cannot allocate memory

|| Parameters lenth and offset for mmap() are too large. Case 24-2 with same length expects mmap() failed with ENOMEM.

In function get_unmapped_area(), it checks len should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value on different platforms
beagleboard 0xC0000000 - 0x01000000 = 0xBF000000
mpc8315e 0xc0000000
routerstation 0x7fff8000UL
sugarbay 0xffff880000000000
|| n/a

|-
|| shm_open/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/9-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || ||test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/29-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/36-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/42-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a
|}

====1.2 M2 RC1====
{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mmap/11-4 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand ||
pa: 0x400fb000

pa_2: 0x40115000

Modification of the partial page at the end of an object is written out
|| Test case map a file with size of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'. Test on all platforms are failed. The reason is after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.

The mapped page is cached.

mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
|| n/a

|-
|| mmap/11-5 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || Modification of the partial page at the end of an object is written out || Same with mmap/11-4, and this test case is to test share memory, so file->f_op->mmap() point to shm_fault() in ipc/shm.c, then it call shmem_fault() ==> shmem_getpage() ==> shmem_getpage_gfp() ==> find_lock_page(). In find_lock_page() it will search the desired pagecache page. || n/a

|-
|| mmap/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || eglibc has define macro MAP_FIXED, and test case check MAP_FIXED defined then quit with PTS_UNTESTED || n/a

|-
|| mmap/28-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test mmap() with length 2 timed file size expect fail with errno ENXIO( No such device or address) but successed. || n/a

|-
|| mmap/31-1 || POSIX || mpc8315e beagleboard sugarbay blacksand ||

off: fffff000, len: fffff000

expect EOVERFLOW but get other error: Cannot allocate memory

|| Parameters lenth and offset for mmap() are too large. Case 24-2 with same length expects mmap() failed with ENOMEM.

In function get_unmapped_area(), it checks len should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value on different platforms
beagleboard 0xC0000000 - 0x01000000 = 0xBF000000
mpc8315e 0xc0000000
routerstation 0x7fff8000UL
sugarbay 0xffff880000000000
|| n/a

|-
|| shm_open/2-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/3-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/6-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/7-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/9-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/10-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/12-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/19-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/24-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || ||test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/27-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/29-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/36-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/42-1 || POSIX || beagleboard routerstation mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a
|}

====1.2 M1 RC2====
Note： from LTP/POSIX maintainer Cyril say: "At least the mmap/31-1, mmap/28-1, mmap/27-1, mmap/24-2, mmap/11-4 and
mmap/11-5 are known to fail sometimes and most likely are coded
incorrecly."

Ref:
http://sourceforge.net/mailarchive/forum.php?thread_name=4EFBC16E.9040102%40windriver.com&forum_name=ltp-list

So these cases should exclude from test list.

{|border="1"
|| '''POSIX cases'''|| '''status''' || '''platforms''' || '''error msg''' || '''analysis''' ||'''bugzilla'''
|-
|| mlockall/3-7 || || sugarbay blacksand || conformance/interfaces/mlockall/3-7: execution: UNRESOLVED || || n/a
|-
|| mmap/11-4 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand ||
pa: 0x400fb000

pa_2: 0x40115000

Modification of the partial page at the end of an object is written out
|| Test case map a file with size of 1/2 * page_size, then write char 'b' to next byte of 1/2 * page_size. Then try to re-mmap() the file and expect the byte next to of 1/2 * page_size should not be character 'b'. Test on all platforms are failed. The reason is after first mmap(), the mapped page for the file is cached in page cache. When do the 2nd or 3rd mmap() still get the same mapped page.

The mapped page is cached.

mmap() is a system call and implemented by mmap2(). Then the call sequence is mmap2() ==> sys_mmap_pgoff() ==> do_mmap_pgoff() ==> mmap_region() ==> file->f_op->mmap(). In ext3 file system, file->f_op->mmap() point to generic_file_mmap(). In generic_file_mmap(), assign the '''Page Fault Exception Handler''' to filemap_fault(). When access the Virtual Memory Area, page fault will occur and the run filemap_fault(). In filemap_fault(), kernel run find_get_page() to search the physical page in the page cache.
|| n/a

|-
|| mmap/11-5 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || Modification of the partial page at the end of an object is written out || Same with mmap/11-4, and this test case is to test share memory, so file->f_op->mmap() point to shm_fault() in ipc/shm.c, then it call shmem_fault() ==> shmem_getpage() ==> shmem_getpage_gfp() ==> find_lock_page(). In find_lock_page() it will search the desired pagecache page. || n/a

|-
|| mmap/27-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || eglibc has define macro MAP_FIXED, and test case check MAP_FIXED defined then quit with PTS_UNTESTED || n/a

|-
|| mmap/28-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || test mmap() with length 2 timed file size expect fail with errno ENXIO( No such device or address) but successed. || n/a

|-
|| mmap/31-1 || POSIX || qemu-arm qemu-ppc mpc8315e beagleboard sugarbay blacksand ||

off: fffff000, len: fffff000

expect EOVERFLOW but get other error: Cannot allocate memory

|| Parameters lenth and offset for mmap() are too large. Case 24-2 with same length expects mmap() failed with ENOMEM.

In function get_unmapped_area(), it checks len should less than TASK_SIZE, otherwise it returns -ENOMEM. TASK_SIZE value on different platforms
beagleboard 0xC0000000 - 0x01000000 = 0xBF000000
mpc8315e 0xc0000000
routerstation 0x7fff8000UL
sugarbay 0xffff880000000000
|| n/a

|-
|| shm_open/23-1 || Ignore || qemu-ppc || HUNG || qemu-ppc is too slow to fork and schedule, parent process create 1000 child processes and then wait children quit and then it time out. Limited to hardware. || n/a

|-
|| shm_open/2-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/3-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/6-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/7-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/9-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/10-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/12-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/19-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/24-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || ||test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/27-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/29-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/36-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a

|-
|| shm_open/42-1 || POSIX || qemu-arm beagleboard qemu-mips routerstation qemu-ppc mpc8315e sugarbay blacksand || || test code just return PTS_UNTESTED and do nothing || n/a
|}