Yocto Project - User contributions [en]

LSB Result

2011-05-25T11:24:30Z

Jingdong Lu: /* Failures tracker */

==Introduction==
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)

==Test Environment==
* Image: core-image-lsb-qt3
* Platform: x86-32(emenlow), x86-64(), ppc(mpc8315e-rdb)

==result==
Below table shows the result of LSB Test on different platforms.

{|border="1"
|| '''Test''' || '''Version''' || '''X86-32(emenlow)''' || '''X86-64()''' || '''ppc(mpc8315e-rdb)''' ||
|-
|| '''Command Check''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Library Check''' || v 4.1.0-1 || Warning || || Warning ||
|-
|| '''Alsa-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Core Tests''' || v 4.1.0-1 || Failures: 12 || || Failures: 66 ||
|-
|| '''Core-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Cpp-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Desktop Tests''' || v 4.1.0-2 || Failures: 2 || || Failures: 24 ||
|-
|| '''Desktop-T2C Tests''' || v 4.1.0-1 || Failures: 2 || || Failures: 17 ||
|-
|| '''Libstdc++ Tests''' || v 4.1.0-13 || Success || || Failures: 2 ||
|-
|| '''OLVER Core Tests''' || v 4.1.0-1 || Failures: 10 || || Block ||
|-
|| '''Perl Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 1 ||
|-
|| '''Printing Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 3 ||
|-
|| '''Python Runtime Tests''' || v 4.1.1-2 || Success || || Success ||
|-
|| '''Qt3-Azov Tests''' || v 4.1.0-1 || Success || || Failures: 106 ||
|-
|| '''Qt4-Azov Tests''' || v 4.1.0-1 ||Failures: 5 || || Failures: 46 ||
|-
|| '''Xml2-Azov Tests''' || v 4.1.0-1 ||Success || || Success ||
|-
|| '''Xts5 Tests''' || v 5.1.5-38 || Failures: 1 || || Failures: 2 ||
|-
|| '''Apache Tests''' || v 2.2.14-3 || Success || || ||
|-
|| '''Expect Tests''' || v 5.43.0-11 || Success || || Success ||
|-
|| '''Groff Tests''' || v 1.20.1-5 || Success || || Success ||
|-
|| '''Raptor Tests''' || v 1.4.19-3 || Success || || Success ||
|-
|| '''Rsync Tests''' || v 3.0.6-3 || Success || || Success ||
|-
|| '''Samba Tests''' || v 3.4.3-5 || Success || || Success ||
|-
|| '''Tcl Tests''' || v 8.5.7-6 || Success || || Success ||
|-
|| '''Xpdf Tests''' || v 1.01-10 || Success || || Failures: 1 ||
|}

==Analysis of result==
Below table shows the failed test cases.
* '''Total failures''': The number of total failures after running test. It includes known problems and real failures which should be fixed.
* '''[[LSB_Bug_tracker | Known problem]]''': Known problem means it is a bug of LSB itself and we can find trace these bugs on http://bugs.linuxbase.org. On link page we give a summary of known problems.
* '''Failures(need to fix)''' : Real failures we should fix them
===x86-32 (emenlw)===
We have 4 failures to fix.
* Core tests: 2
* Xts5 Tests:1
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 12 || 10 || 2 || ||
|-
|| '''Desktop Tests''' || 2 || 2 || || ||
|-
|| '''Desktop-T2C Tests''' || 2 || 2 || || ||
|-
|| '''OLVER Core Tests''' || 10 || 10 || || ||
|-
|| '''Perl Tests''' || 1 || 1 || || ||
|-
|| '''Printing Tests''' || 1 || 1 || || ||
|-
|| '''Qt4-Azov Tests''' || 5 || 5 || || ||
|-
|| '''Xts5 Tests''' || 1 || || 1 || ||
|}

===ppc(mpc8315e)===
We have the following failures(including "unresolved" and "failed") to fix.
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 66 || 10 || 47(unresolved), 8(failed), 1(unreported) || ||
|-
|| '''Desktop Tests''' || 24 || 20 || 2(unresolved), 1(failed), 1 unreported || ||
|-
|| '''Desktop-T2C Tests''' || 17 || 2 || 15(unresolved) || ||
|-
|| '''Libstdc++ Tests''' || 2 || || 2 || ||
|-
|| '''OLVER Core Tests''' || || || || Blocked ||
|-
|| '''Perl Tests''' || 1 || 1 || || ||
|-
|| '''Printing Tests''' || 3 || 1 || 1(unresolved), 1(failure), 1(unreported) || ||
|-
|| '''Qt3-Azov''' || 106 || || 106(unresolved) || ||
|-
|| '''Qt4-Azov''' || 46 || 1 || 45(unresolved) || ||
|-
|| '''Xts5 Tests''' || 2 || || 2 || ||
|-
|| '''Xpdf Tests''' || 1 || || 1 || ||
|}
* Core Tests:
** /tset/ANSI.os/math/... : SIGILL cause 47 unresolved failures.
* OLVER Core Tests:
** OLVER Core Tests can't be finished on mpc8315e-rdb
** We think the reason which make test blocked is the low memory(128M on mpc8315e). Because we re-run the test case which is blocked during OLVER core tests and it can pass successfully. That is to say, if we run the single test case, it will be passed. But we run all OLVER core tests and the whole tests will be blocked. We have ever run OLVER Core Tests for nearly 50 hours and it can't finish.
** lsb-test-olver-core may require about 512Mb of system memory (with an X server and a contemporary desktop running), as well as 2Gb of free disk space to complete a test run. The reference linkage: http://ldn.linuxfoundation.org/lsb/preparing-lsb-distribution-testing
* Qt3-Azov Tests:
** Out of memory error cause all of the failures
* Xpdf Tests:
** SIGILL cause Xpdf failed.

==Failures tracker==
We should fix the following problems. We also filed bugs for them and try to fix them.
{|border="1"
|| '''Tests''' || '''Sub Tests''' || '''Test Number''' || '''Arch''' || '''Bug ID of yocto''' || '''Proposal suggestion''' ||
|-
|| '''Core Tests''' || /tset/LSB.fhs/var/lib/lib-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| '''Core Tests''' || /tset/LSB.fhs/var/lib-misc/lib-misc-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| '''Xts5 Tests''' || /tset/Xopen/strtkysym/Test || 7 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 || http://git.pokylinux.org/cgit.cgi/poky-contrib/commit/?h=jingdonglu/distro&id=c6dde065b9fafabeda6904c23118a11e99d23e08 ||
|-
|| '''Perl Tests''' || ../ext/IPC/SysV/t/ipcsysv.t || 294 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1078 || Maybe a LSB bug(we have filed it as a bug on LSB bugzilla ||
|}

==Known problems tracker==
See details on [[LSB_Bug_tracker | Known problems tracker]]

LSB Result

2011-05-25T11:13:00Z

Jingdong Lu: /* x86-32 (emenlw) */

==Introduction==
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)

==Test Environment==
* Image: core-image-lsb-qt3
* Platform: x86-32(emenlow), x86-64(), ppc(mpc8315e-rdb)

==result==
Below table shows the result of LSB Test on different platforms.

{|border="1"
|| '''Test''' || '''Version''' || '''X86-32(emenlow)''' || '''X86-64()''' || '''ppc(mpc8315e-rdb)''' ||
|-
|| '''Command Check''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Library Check''' || v 4.1.0-1 || Warning || || Warning ||
|-
|| '''Alsa-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Core Tests''' || v 4.1.0-1 || Failures: 12 || || Failures: 66 ||
|-
|| '''Core-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Cpp-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Desktop Tests''' || v 4.1.0-2 || Failures: 2 || || Failures: 24 ||
|-
|| '''Desktop-T2C Tests''' || v 4.1.0-1 || Failures: 2 || || Failures: 17 ||
|-
|| '''Libstdc++ Tests''' || v 4.1.0-13 || Success || || Failures: 2 ||
|-
|| '''OLVER Core Tests''' || v 4.1.0-1 || Failures: 10 || || Block ||
|-
|| '''Perl Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 1 ||
|-
|| '''Printing Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 3 ||
|-
|| '''Python Runtime Tests''' || v 4.1.1-2 || Success || || Success ||
|-
|| '''Qt3-Azov Tests''' || v 4.1.0-1 || Success || || Failures: 106 ||
|-
|| '''Qt4-Azov Tests''' || v 4.1.0-1 ||Failures: 5 || || Failures: 46 ||
|-
|| '''Xml2-Azov Tests''' || v 4.1.0-1 ||Success || || Success ||
|-
|| '''Xts5 Tests''' || v 5.1.5-38 || Failures: 1 || || Failures: 2 ||
|-
|| '''Apache Tests''' || v 2.2.14-3 || Success || || ||
|-
|| '''Expect Tests''' || v 5.43.0-11 || Success || || Success ||
|-
|| '''Groff Tests''' || v 1.20.1-5 || Success || || Success ||
|-
|| '''Raptor Tests''' || v 1.4.19-3 || Success || || Success ||
|-
|| '''Rsync Tests''' || v 3.0.6-3 || Success || || Success ||
|-
|| '''Samba Tests''' || v 3.4.3-5 || Success || || Success ||
|-
|| '''Tcl Tests''' || v 8.5.7-6 || Success || || Success ||
|-
|| '''Xpdf Tests''' || v 1.01-10 || Success || || Failures: 1 ||
|}

==Analysis of result==
Below table shows the failed test cases.
* '''Total failures''': The number of total failures after running test. It includes known problems and real failures which should be fixed.
* '''[[LSB_Bug_tracker | Known problem]]''': Known problem means it is a bug of LSB itself and we can find trace these bugs on http://bugs.linuxbase.org. On link page we give a summary of known problems.
* '''Failures(need to fix)''' : Real failures we should fix them
===x86-32 (emenlw)===
We have 4 failures to fix.
* Core tests: 2
* Xts5 Tests:1
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 12 || 10 || 2 || ||
|-
|| '''Desktop Tests''' || 2 || 2 || || ||
|-
|| '''Desktop-T2C Tests''' || 2 || 2 || || ||
|-
|| '''OLVER Core Tests''' || 10 || 10 || || ||
|-
|| '''Perl Tests''' || 1 || 1 || || ||
|-
|| '''Printing Tests''' || 1 || 1 || || ||
|-
|| '''Qt4-Azov Tests''' || 5 || 5 || || ||
|-
|| '''Xts5 Tests''' || 1 || || 1 || ||
|}

===ppc(mpc8315e)===
We have the following failures(including "unresolved" and "failed") to fix.
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 66 || 10 || 47(unresolved), 8(failed), 1(unreported) || ||
|-
|| '''Desktop Tests''' || 24 || 20 || 2(unresolved), 1(failed), 1 unreported || ||
|-
|| '''Desktop-T2C Tests''' || 17 || 2 || 15(unresolved) || ||
|-
|| '''Libstdc++ Tests''' || 2 || || 2 || ||
|-
|| '''OLVER Core Tests''' || || || || Blocked ||
|-
|| '''Perl Tests''' || 1 || 1 || || ||
|-
|| '''Printing Tests''' || 3 || 1 || 1(unresolved), 1(failure), 1(unreported) || ||
|-
|| '''Qt3-Azov''' || 106 || || 106(unresolved) || ||
|-
|| '''Qt4-Azov''' || 46 || 1 || 45(unresolved) || ||
|-
|| '''Xts5 Tests''' || 2 || || 2 || ||
|-
|| '''Xpdf Tests''' || 1 || || 1 || ||
|}
* Core Tests:
** /tset/ANSI.os/math/... : SIGILL cause 47 unresolved failures.
* OLVER Core Tests:
** OLVER Core Tests can't be finished on mpc8315e-rdb
** We think the reason which make test blocked is the low memory(128M on mpc8315e). Because we re-run the test case which is blocked during OLVER core tests and it can pass successfully. That is to say, if we run the single test case, it will be passed. But we run all OLVER core tests and the whole tests will be blocked. We have ever run OLVER Core Tests for nearly 50 hours and it can't finish.
** lsb-test-olver-core may require about 512Mb of system memory (with an X server and a contemporary desktop running), as well as 2Gb of free disk space to complete a test run. The reference linkage: http://ldn.linuxfoundation.org/lsb/preparing-lsb-distribution-testing
* Qt3-Azov Tests:
** Out of memory error cause all of the failures
* Xpdf Tests:
** SIGILL cause Xpdf failed.

==Failures tracker==
We should fix the following problems. We also filed bugs for them and try to fix them.
{|border="1"
|| '''Tests''' || '''Sub Tests''' || '''Test Number''' || '''Arch''' || '''Bug ID of yocto''' || '''Proposal suggestion''' ||
|-
|| '''Core Tests''' || /tset/LSB.fhs/var/lib/lib-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| '''Core Tests''' || /tset/LSB.fhs/var/lib-misc/lib-misc-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| '''Xts5 Tests''' || /tset/Xopen/strtkysym/Test || 7 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 || http://git.pokylinux.org/cgit.cgi/poky-contrib/commit/?h=jingdonglu/distro&id=c6dde065b9fafabeda6904c23118a11e99d23e08 ||
|-
|| '''Perl Tests''' || ../ext/IPC/SysV/t/ipcsysv.t || 294 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1078 || Maybe a LSB bug(we have filed if as a bug on LSB bugzilla ||
|}

==Known problems tracker==
See details on [[LSB_Bug_tracker | Known problems tracker]]

LSB Result

2011-05-25T11:10:29Z

Jingdong Lu: /* ppc(mpc8315e) */

==Introduction==
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)

==Test Environment==
* Image: core-image-lsb-qt3
* Platform: x86-32(emenlow), x86-64(), ppc(mpc8315e-rdb)

==result==
Below table shows the result of LSB Test on different platforms.

{|border="1"
|| '''Test''' || '''Version''' || '''X86-32(emenlow)''' || '''X86-64()''' || '''ppc(mpc8315e-rdb)''' ||
|-
|| '''Command Check''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Library Check''' || v 4.1.0-1 || Warning || || Warning ||
|-
|| '''Alsa-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Core Tests''' || v 4.1.0-1 || Failures: 12 || || Failures: 66 ||
|-
|| '''Core-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Cpp-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Desktop Tests''' || v 4.1.0-2 || Failures: 2 || || Failures: 24 ||
|-
|| '''Desktop-T2C Tests''' || v 4.1.0-1 || Failures: 2 || || Failures: 17 ||
|-
|| '''Libstdc++ Tests''' || v 4.1.0-13 || Success || || Failures: 2 ||
|-
|| '''OLVER Core Tests''' || v 4.1.0-1 || Failures: 10 || || Block ||
|-
|| '''Perl Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 1 ||
|-
|| '''Printing Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 3 ||
|-
|| '''Python Runtime Tests''' || v 4.1.1-2 || Success || || Success ||
|-
|| '''Qt3-Azov Tests''' || v 4.1.0-1 || Success || || Failures: 106 ||
|-
|| '''Qt4-Azov Tests''' || v 4.1.0-1 ||Failures: 5 || || Failures: 46 ||
|-
|| '''Xml2-Azov Tests''' || v 4.1.0-1 ||Success || || Success ||
|-
|| '''Xts5 Tests''' || v 5.1.5-38 || Failures: 1 || || Failures: 2 ||
|-
|| '''Apache Tests''' || v 2.2.14-3 || Success || || ||
|-
|| '''Expect Tests''' || v 5.43.0-11 || Success || || Success ||
|-
|| '''Groff Tests''' || v 1.20.1-5 || Success || || Success ||
|-
|| '''Raptor Tests''' || v 1.4.19-3 || Success || || Success ||
|-
|| '''Rsync Tests''' || v 3.0.6-3 || Success || || Success ||
|-
|| '''Samba Tests''' || v 3.4.3-5 || Success || || Success ||
|-
|| '''Tcl Tests''' || v 8.5.7-6 || Success || || Success ||
|-
|| '''Xpdf Tests''' || v 1.01-10 || Success || || Failures: 1 ||
|}

==Analysis of result==
Below table shows the failed test cases.
* '''Total failures''': The number of total failures after running test. It includes known problems and real failures which should be fixed.
* '''[[LSB_Bug_tracker | Known problem]]''': Known problem means it is a bug of LSB itself and we can find trace these bugs on http://bugs.linuxbase.org. On link page we give a summary of known problems.
* '''Failures(need to fix)''' : Real failures we should fix them
===x86-32 (emenlw)===
We have 4 failures to fix.
* Core tests: 2
* Xts5 Tests:1
* Perl Tests:1
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 12 || 10 || 2 || ||
|-
|| '''Desktop Tests''' || 2 || 2 || || ||
|-
|| '''Desktop-T2C Tests''' || 2 || 2 || || ||
|-
|| '''OLVER Core Tests''' || 10 || 10 || || ||
|-
|| '''Perl Tests''' || 1 || 1 || || ||
|-
|| '''Printing Tests''' || 1 || 1 || || ||
|-
|| '''Qt4-Azov Tests''' || 5 || 5 || || ||
|-
|| '''Xts5 Tests''' || 1 || || 1 || ||
|}

===ppc(mpc8315e)===
We have the following failures(including "unresolved" and "failed") to fix.
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 66 || 10 || 47(unresolved), 8(failed), 1(unreported) || ||
|-
|| '''Desktop Tests''' || 24 || 20 || 2(unresolved), 1(failed), 1 unreported || ||
|-
|| '''Desktop-T2C Tests''' || 17 || 2 || 15(unresolved) || ||
|-
|| '''Libstdc++ Tests''' || 2 || || 2 || ||
|-
|| '''OLVER Core Tests''' || || || || Blocked ||
|-
|| '''Perl Tests''' || 1 || 1 || || ||
|-
|| '''Printing Tests''' || 3 || 1 || 1(unresolved), 1(failure), 1(unreported) || ||
|-
|| '''Qt3-Azov''' || 106 || || 106(unresolved) || ||
|-
|| '''Qt4-Azov''' || 46 || 1 || 45(unresolved) || ||
|-
|| '''Xts5 Tests''' || 2 || || 2 || ||
|-
|| '''Xpdf Tests''' || 1 || || 1 || ||
|}
* Core Tests:
** /tset/ANSI.os/math/... : SIGILL cause 47 unresolved failures.
* OLVER Core Tests:
** OLVER Core Tests can't be finished on mpc8315e-rdb
** We think the reason which make test blocked is the low memory(128M on mpc8315e). Because we re-run the test case which is blocked during OLVER core tests and it can pass successfully. That is to say, if we run the single test case, it will be passed. But we run all OLVER core tests and the whole tests will be blocked. We have ever run OLVER Core Tests for nearly 50 hours and it can't finish.
** lsb-test-olver-core may require about 512Mb of system memory (with an X server and a contemporary desktop running), as well as 2Gb of free disk space to complete a test run. The reference linkage: http://ldn.linuxfoundation.org/lsb/preparing-lsb-distribution-testing
* Qt3-Azov Tests:
** Out of memory error cause all of the failures
* Xpdf Tests:
** SIGILL cause Xpdf failed.

==Failures tracker==
We should fix the following problems. We also filed bugs for them and try to fix them.
{|border="1"
|| '''Tests''' || '''Sub Tests''' || '''Test Number''' || '''Arch''' || '''Bug ID of yocto''' || '''Proposal suggestion''' ||
|-
|| '''Core Tests''' || /tset/LSB.fhs/var/lib/lib-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| '''Core Tests''' || /tset/LSB.fhs/var/lib-misc/lib-misc-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| '''Xts5 Tests''' || /tset/Xopen/strtkysym/Test || 7 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 || http://git.pokylinux.org/cgit.cgi/poky-contrib/commit/?h=jingdonglu/distro&id=c6dde065b9fafabeda6904c23118a11e99d23e08 ||
|-
|| '''Perl Tests''' || ../ext/IPC/SysV/t/ipcsysv.t || 294 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1078 || Maybe a LSB bug(we have filed if as a bug on LSB bugzilla ||
|}

==Known problems tracker==
See details on [[LSB_Bug_tracker | Known problems tracker]]

LSB Result

2011-05-25T11:09:39Z

Jingdong Lu: /* x86-32 (emenlw) */

==Introduction==
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)

==Test Environment==
* Image: core-image-lsb-qt3
* Platform: x86-32(emenlow), x86-64(), ppc(mpc8315e-rdb)

==result==
Below table shows the result of LSB Test on different platforms.

{|border="1"
|| '''Test''' || '''Version''' || '''X86-32(emenlow)''' || '''X86-64()''' || '''ppc(mpc8315e-rdb)''' ||
|-
|| '''Command Check''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Library Check''' || v 4.1.0-1 || Warning || || Warning ||
|-
|| '''Alsa-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Core Tests''' || v 4.1.0-1 || Failures: 12 || || Failures: 66 ||
|-
|| '''Core-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Cpp-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Desktop Tests''' || v 4.1.0-2 || Failures: 2 || || Failures: 24 ||
|-
|| '''Desktop-T2C Tests''' || v 4.1.0-1 || Failures: 2 || || Failures: 17 ||
|-
|| '''Libstdc++ Tests''' || v 4.1.0-13 || Success || || Failures: 2 ||
|-
|| '''OLVER Core Tests''' || v 4.1.0-1 || Failures: 10 || || Block ||
|-
|| '''Perl Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 1 ||
|-
|| '''Printing Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 3 ||
|-
|| '''Python Runtime Tests''' || v 4.1.1-2 || Success || || Success ||
|-
|| '''Qt3-Azov Tests''' || v 4.1.0-1 || Success || || Failures: 106 ||
|-
|| '''Qt4-Azov Tests''' || v 4.1.0-1 ||Failures: 5 || || Failures: 46 ||
|-
|| '''Xml2-Azov Tests''' || v 4.1.0-1 ||Success || || Success ||
|-
|| '''Xts5 Tests''' || v 5.1.5-38 || Failures: 1 || || Failures: 2 ||
|-
|| '''Apache Tests''' || v 2.2.14-3 || Success || || ||
|-
|| '''Expect Tests''' || v 5.43.0-11 || Success || || Success ||
|-
|| '''Groff Tests''' || v 1.20.1-5 || Success || || Success ||
|-
|| '''Raptor Tests''' || v 1.4.19-3 || Success || || Success ||
|-
|| '''Rsync Tests''' || v 3.0.6-3 || Success || || Success ||
|-
|| '''Samba Tests''' || v 3.4.3-5 || Success || || Success ||
|-
|| '''Tcl Tests''' || v 8.5.7-6 || Success || || Success ||
|-
|| '''Xpdf Tests''' || v 1.01-10 || Success || || Failures: 1 ||
|}

==Analysis of result==
Below table shows the failed test cases.
* '''Total failures''': The number of total failures after running test. It includes known problems and real failures which should be fixed.
* '''[[LSB_Bug_tracker | Known problem]]''': Known problem means it is a bug of LSB itself and we can find trace these bugs on http://bugs.linuxbase.org. On link page we give a summary of known problems.
* '''Failures(need to fix)''' : Real failures we should fix them
===x86-32 (emenlw)===
We have 4 failures to fix.
* Core tests: 2
* Xts5 Tests:1
* Perl Tests:1
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 12 || 10 || 2 || ||
|-
|| '''Desktop Tests''' || 2 || 2 || || ||
|-
|| '''Desktop-T2C Tests''' || 2 || 2 || || ||
|-
|| '''OLVER Core Tests''' || 10 || 10 || || ||
|-
|| '''Perl Tests''' || 1 || 1 || || ||
|-
|| '''Printing Tests''' || 1 || 1 || || ||
|-
|| '''Qt4-Azov Tests''' || 5 || 5 || || ||
|-
|| '''Xts5 Tests''' || 1 || || 1 || ||
|}

===ppc(mpc8315e)===
We have the following failures(including "unresolved" and "failed") to fix.
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 66 || 10 || 47(unresolved), 8(failed), 1(unreported) || ||
|-
|| '''Desktop Tests''' || 24 || 20 || 2(unresolved), 1(failed), 1 unreported || ||
|-
|| '''Desktop-T2C Tests''' || 17 || 2 || 15(unresolved) || ||
|-
|| '''Libstdc++ Tests''' || 2 || || 2 || ||
|-
|| '''OLVER Core Tests''' || || || || Blocked ||
|-
|| '''Perl Tests''' || 1 || 1 || || ||
|-
|| '''Printing Tests''' || 3 || 1 || 1(unresolved), 1(failure), 1(unreported) || ||
|-
|| '''Qt3-Azov''' || 106 || || 106(unresolved) || ||
|-
|| '''Qt4-Azov''' || 46 || 1 || 45(unresolved) || ||
|-
|| '''Xts5 Tests''' || 2 || || 2 || ||
|-
|| '''Xpdf Tests''' || 1 || || 1 || ||
|}
* Core Tests:
** /tset/ANSI.os/math/... : SIGILL error cause 47 unresolved failures.
* OLVER Core Tests:
** OLVER Core Tests can't be finished on mpc8315e-rdb
** We think the reason which make test blocked is the low memory(128M on mpc8315e). Because we re-run the test case which is blocked during OLVER core tests and it can pass successfully. That is to say, if we run the single test case, it will be passed. But we run all OLVER core tests and the whole tests will be blocked. We have ever run OLVER Core Tests for nearly 50 hours and it can't finish.
** lsb-test-olver-core may require about 512Mb of system memory (with an X server and a contemporary desktop running), as well as 2Gb of free disk space to complete a test run. The reference linkage: http://ldn.linuxfoundation.org/lsb/preparing-lsb-distribution-testing
* Qt3-Azov Tests:
** Out of memory error cause all of the failures

==Failures tracker==
We should fix the following problems. We also filed bugs for them and try to fix them.
{|border="1"
|| '''Tests''' || '''Sub Tests''' || '''Test Number''' || '''Arch''' || '''Bug ID of yocto''' || '''Proposal suggestion''' ||
|-
|| '''Core Tests''' || /tset/LSB.fhs/var/lib/lib-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| '''Core Tests''' || /tset/LSB.fhs/var/lib-misc/lib-misc-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| '''Xts5 Tests''' || /tset/Xopen/strtkysym/Test || 7 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 || http://git.pokylinux.org/cgit.cgi/poky-contrib/commit/?h=jingdonglu/distro&id=c6dde065b9fafabeda6904c23118a11e99d23e08 ||
|-
|| '''Perl Tests''' || ../ext/IPC/SysV/t/ipcsysv.t || 294 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1078 || Maybe a LSB bug(we have filed if as a bug on LSB bugzilla ||
|}

==Known problems tracker==
See details on [[LSB_Bug_tracker | Known problems tracker]]

LSB Result

2011-05-25T11:09:24Z

Jingdong Lu: /* ppc(mpc8315e) */

==Introduction==
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)

==Test Environment==
* Image: core-image-lsb-qt3
* Platform: x86-32(emenlow), x86-64(), ppc(mpc8315e-rdb)

==result==
Below table shows the result of LSB Test on different platforms.

{|border="1"
|| '''Test''' || '''Version''' || '''X86-32(emenlow)''' || '''X86-64()''' || '''ppc(mpc8315e-rdb)''' ||
|-
|| '''Command Check''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Library Check''' || v 4.1.0-1 || Warning || || Warning ||
|-
|| '''Alsa-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Core Tests''' || v 4.1.0-1 || Failures: 12 || || Failures: 66 ||
|-
|| '''Core-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Cpp-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Desktop Tests''' || v 4.1.0-2 || Failures: 2 || || Failures: 24 ||
|-
|| '''Desktop-T2C Tests''' || v 4.1.0-1 || Failures: 2 || || Failures: 17 ||
|-
|| '''Libstdc++ Tests''' || v 4.1.0-13 || Success || || Failures: 2 ||
|-
|| '''OLVER Core Tests''' || v 4.1.0-1 || Failures: 10 || || Block ||
|-
|| '''Perl Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 1 ||
|-
|| '''Printing Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 3 ||
|-
|| '''Python Runtime Tests''' || v 4.1.1-2 || Success || || Success ||
|-
|| '''Qt3-Azov Tests''' || v 4.1.0-1 || Success || || Failures: 106 ||
|-
|| '''Qt4-Azov Tests''' || v 4.1.0-1 ||Failures: 5 || || Failures: 46 ||
|-
|| '''Xml2-Azov Tests''' || v 4.1.0-1 ||Success || || Success ||
|-
|| '''Xts5 Tests''' || v 5.1.5-38 || Failures: 1 || || Failures: 2 ||
|-
|| '''Apache Tests''' || v 2.2.14-3 || Success || || ||
|-
|| '''Expect Tests''' || v 5.43.0-11 || Success || || Success ||
|-
|| '''Groff Tests''' || v 1.20.1-5 || Success || || Success ||
|-
|| '''Raptor Tests''' || v 1.4.19-3 || Success || || Success ||
|-
|| '''Rsync Tests''' || v 3.0.6-3 || Success || || Success ||
|-
|| '''Samba Tests''' || v 3.4.3-5 || Success || || Success ||
|-
|| '''Tcl Tests''' || v 8.5.7-6 || Success || || Success ||
|-
|| '''Xpdf Tests''' || v 1.01-10 || Success || || Failures: 1 ||
|}

==Analysis of result==
Below table shows the failed test cases.
* '''Total failures''': The number of total failures after running test. It includes known problems and real failures which should be fixed.
* '''[[LSB_Bug_tracker | Known problem]]''': Known problem means it is a bug of LSB itself and we can find trace these bugs on http://bugs.linuxbase.org. On link page we give a summary of known problems.
* '''Failures(need to fix)''' : Real failures we should fix them
===x86-32 (emenlw)===
We have 4 failures to fix.
* Core tests: 2
* Xts5 Tests:1
* Perl Tests:1
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 12 || 10 || 2 || ||
|-
|| '''Desktop Tests''' || 2 || 2 || || ||
|-
|| '''Desktop-T2C Tests''' || 2 || 2 || || ||
|-
|| '''OLVER Core Tests''' || 10 || 10 || || ||
|-
|| '''Perl Tests''' || 1 || || 1 || ||
|-
|| '''Printing Tests''' || 1 || 1 || || ||
|-
|| '''Qt4-Azov Tests''' || 5 || 5 || || ||
|-
|| '''Xts5 Tests''' || 1 || || 1 || ||
|}

===ppc(mpc8315e)===
We have the following failures(including "unresolved" and "failed") to fix.
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 66 || 10 || 47(unresolved), 8(failed), 1(unreported) || ||
|-
|| '''Desktop Tests''' || 24 || 20 || 2(unresolved), 1(failed), 1 unreported || ||
|-
|| '''Desktop-T2C Tests''' || 17 || 2 || 15(unresolved) || ||
|-
|| '''Libstdc++ Tests''' || 2 || || 2 || ||
|-
|| '''OLVER Core Tests''' || || || || Blocked ||
|-
|| '''Perl Tests''' || 1 || 1 || || ||
|-
|| '''Printing Tests''' || 3 || 1 || 1(unresolved), 1(failure), 1(unreported) || ||
|-
|| '''Qt3-Azov''' || 106 || || 106(unresolved) || ||
|-
|| '''Qt4-Azov''' || 46 || 1 || 45(unresolved) || ||
|-
|| '''Xts5 Tests''' || 2 || || 2 || ||
|-
|| '''Xpdf Tests''' || 1 || || 1 || ||
|}
* Core Tests:
** /tset/ANSI.os/math/... : SIGILL error cause 47 unresolved failures.
* OLVER Core Tests:
** OLVER Core Tests can't be finished on mpc8315e-rdb
** We think the reason which make test blocked is the low memory(128M on mpc8315e). Because we re-run the test case which is blocked during OLVER core tests and it can pass successfully. That is to say, if we run the single test case, it will be passed. But we run all OLVER core tests and the whole tests will be blocked. We have ever run OLVER Core Tests for nearly 50 hours and it can't finish.
** lsb-test-olver-core may require about 512Mb of system memory (with an X server and a contemporary desktop running), as well as 2Gb of free disk space to complete a test run. The reference linkage: http://ldn.linuxfoundation.org/lsb/preparing-lsb-distribution-testing
* Qt3-Azov Tests:
** Out of memory error cause all of the failures

==Failures tracker==
We should fix the following problems. We also filed bugs for them and try to fix them.
{|border="1"
|| '''Tests''' || '''Sub Tests''' || '''Test Number''' || '''Arch''' || '''Bug ID of yocto''' || '''Proposal suggestion''' ||
|-
|| '''Core Tests''' || /tset/LSB.fhs/var/lib/lib-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| '''Core Tests''' || /tset/LSB.fhs/var/lib-misc/lib-misc-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| '''Xts5 Tests''' || /tset/Xopen/strtkysym/Test || 7 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 || http://git.pokylinux.org/cgit.cgi/poky-contrib/commit/?h=jingdonglu/distro&id=c6dde065b9fafabeda6904c23118a11e99d23e08 ||
|-
|| '''Perl Tests''' || ../ext/IPC/SysV/t/ipcsysv.t || 294 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1078 || Maybe a LSB bug(we have filed if as a bug on LSB bugzilla ||
|}

==Known problems tracker==
See details on [[LSB_Bug_tracker | Known problems tracker]]

LSB Result

2011-05-25T10:54:52Z

Jingdong Lu: /* Failures tracker */

==Introduction==
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)

==Test Environment==
* Image: core-image-lsb-qt3
* Platform: x86-32(emenlow), x86-64(), ppc(mpc8315e-rdb)

==result==
Below table shows the result of LSB Test on different platforms.

{|border="1"
|| '''Test''' || '''Version''' || '''X86-32(emenlow)''' || '''X86-64()''' || '''ppc(mpc8315e-rdb)''' ||
|-
|| '''Command Check''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Library Check''' || v 4.1.0-1 || Warning || || Warning ||
|-
|| '''Alsa-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Core Tests''' || v 4.1.0-1 || Failures: 12 || || Failures: 66 ||
|-
|| '''Core-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Cpp-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Desktop Tests''' || v 4.1.0-2 || Failures: 2 || || Failures: 24 ||
|-
|| '''Desktop-T2C Tests''' || v 4.1.0-1 || Failures: 2 || || Failures: 17 ||
|-
|| '''Libstdc++ Tests''' || v 4.1.0-13 || Success || || Failures: 2 ||
|-
|| '''OLVER Core Tests''' || v 4.1.0-1 || Failures: 10 || || Block ||
|-
|| '''Perl Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 1 ||
|-
|| '''Printing Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 3 ||
|-
|| '''Python Runtime Tests''' || v 4.1.1-2 || Success || || Success ||
|-
|| '''Qt3-Azov Tests''' || v 4.1.0-1 || Success || || Failures: 106 ||
|-
|| '''Qt4-Azov Tests''' || v 4.1.0-1 ||Failures: 5 || || Failures: 46 ||
|-
|| '''Xml2-Azov Tests''' || v 4.1.0-1 ||Success || || Success ||
|-
|| '''Xts5 Tests''' || v 5.1.5-38 || Failures: 1 || || Failures: 2 ||
|-
|| '''Apache Tests''' || v 2.2.14-3 || Success || || ||
|-
|| '''Expect Tests''' || v 5.43.0-11 || Success || || Success ||
|-
|| '''Groff Tests''' || v 1.20.1-5 || Success || || Success ||
|-
|| '''Raptor Tests''' || v 1.4.19-3 || Success || || Success ||
|-
|| '''Rsync Tests''' || v 3.0.6-3 || Success || || Success ||
|-
|| '''Samba Tests''' || v 3.4.3-5 || Success || || Success ||
|-
|| '''Tcl Tests''' || v 8.5.7-6 || Success || || Success ||
|-
|| '''Xpdf Tests''' || v 1.01-10 || Success || || Failures: 1 ||
|}

==Analysis of result==
Below table shows the failed test cases.
* '''Total failures''': The number of total failures after running test. It includes known problems and real failures which should be fixed.
* '''[[LSB_Bug_tracker | Known problem]]''': Known problem means it is a bug of LSB itself and we can find trace these bugs on http://bugs.linuxbase.org. On link page we give a summary of known problems.
* '''Failures(need to fix)''' : Real failures we should fix them
===x86-32 (emenlw)===
We have 4 failures to fix.
* Core tests: 2
* Xts5 Tests:1
* Perl Tests:1
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 12 || 10 || 2 || ||
|-
|| '''Desktop Tests''' || 2 || 2 || || ||
|-
|| '''Desktop-T2C Tests''' || 2 || 2 || || ||
|-
|| '''OLVER Core Tests''' || 10 || 10 || || ||
|-
|| '''Perl Tests''' || 1 || || 1 || ||
|-
|| '''Printing Tests''' || 1 || 1 || || ||
|-
|| '''Qt4-Azov Tests''' || 5 || 5 || || ||
|-
|| '''Xts5 Tests''' || 1 || || 1 || ||
|}

===ppc(mpc8315e)===
We have the following failures(including "unresolved" and "failed") to fix.
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 66 || 10 || 47(unresolved), 8(failed), 1(unreported) || ||
|-
|| '''Desktop Tests''' || 24 || 20 || 2(unresolved), 1(failed), 1 unreported || ||
|-
|| '''Desktop-T2C Tests''' || 17 || 2 || 15(unresolved) || ||
|-
|| '''Libstdc++ Tests''' || 2 || || 2 || ||
|-
|| '''OLVER Core Tests''' || || || || Blocked ||
|-
|| '''Perl Tests''' || 1 || || 1 || ||
|-
|| '''Printing Tests''' || 3 || 1 || 1(unresolved), 1(failure), 1(unreported) || ||
|-
|| '''Qt3-Azov''' || 106 || || 106(unresolved) || ||
|-
|| '''Qt4-Azov''' || 46 || 1 || 45(unresolved) || ||
|-
|| '''Xts5 Tests''' || 2 || || 2 || ||
|-
|| '''Xpdf Tests''' || 1 || || 1 || ||
|}
* Core Tests:
** /tset/ANSI.os/math/... : SIGILL error cause 47 unresolved failures.
* OLVER Core Tests:
** OLVER Core Tests can't be finished on mpc8315e-rdb
** We think the reason which make test blocked is the low memory(128M on mpc8315e). Because we re-run the test case which is blocked during OLVER core tests and it can pass successfully. That is to say, if we run the single test case, it will be passed. But we run all OLVER core tests and the whole tests will be blocked. We have ever run OLVER Core Tests for nearly 50 hours and it can't finish.
** lsb-test-olver-core may require about 512Mb of system memory (with an X server and a contemporary desktop running), as well as 2Gb of free disk space to complete a test run. The reference linkage: http://ldn.linuxfoundation.org/lsb/preparing-lsb-distribution-testing
* Qt3-Azov Tests:
** Out of memory error cause all of the failures

==Failures tracker==
We should fix the following problems. We also filed bugs for them and try to fix them.
{|border="1"
|| '''Tests''' || '''Sub Tests''' || '''Test Number''' || '''Arch''' || '''Bug ID of yocto''' || '''Proposal suggestion''' ||
|-
|| '''Core Tests''' || /tset/LSB.fhs/var/lib/lib-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| '''Core Tests''' || /tset/LSB.fhs/var/lib-misc/lib-misc-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| '''Xts5 Tests''' || /tset/Xopen/strtkysym/Test || 7 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 || http://git.pokylinux.org/cgit.cgi/poky-contrib/commit/?h=jingdonglu/distro&id=c6dde065b9fafabeda6904c23118a11e99d23e08 ||
|-
|| '''Perl Tests''' || ../ext/IPC/SysV/t/ipcsysv.t || 294 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1078 || Maybe a LSB bug(we have filed if as a bug on LSB bugzilla ||
|}

==Known problems tracker==
See details on [[LSB_Bug_tracker | Known problems tracker]]

LSB Result

2011-05-25T10:54:34Z

Jingdong Lu: /* Failures tracker */

==Introduction==
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)

==Test Environment==
* Image: core-image-lsb-qt3
* Platform: x86-32(emenlow), x86-64(), ppc(mpc8315e-rdb)

==result==
Below table shows the result of LSB Test on different platforms.

{|border="1"
|| '''Test''' || '''Version''' || '''X86-32(emenlow)''' || '''X86-64()''' || '''ppc(mpc8315e-rdb)''' ||
|-
|| '''Command Check''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Library Check''' || v 4.1.0-1 || Warning || || Warning ||
|-
|| '''Alsa-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Core Tests''' || v 4.1.0-1 || Failures: 12 || || Failures: 66 ||
|-
|| '''Core-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Cpp-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Desktop Tests''' || v 4.1.0-2 || Failures: 2 || || Failures: 24 ||
|-
|| '''Desktop-T2C Tests''' || v 4.1.0-1 || Failures: 2 || || Failures: 17 ||
|-
|| '''Libstdc++ Tests''' || v 4.1.0-13 || Success || || Failures: 2 ||
|-
|| '''OLVER Core Tests''' || v 4.1.0-1 || Failures: 10 || || Block ||
|-
|| '''Perl Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 1 ||
|-
|| '''Printing Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 3 ||
|-
|| '''Python Runtime Tests''' || v 4.1.1-2 || Success || || Success ||
|-
|| '''Qt3-Azov Tests''' || v 4.1.0-1 || Success || || Failures: 106 ||
|-
|| '''Qt4-Azov Tests''' || v 4.1.0-1 ||Failures: 5 || || Failures: 46 ||
|-
|| '''Xml2-Azov Tests''' || v 4.1.0-1 ||Success || || Success ||
|-
|| '''Xts5 Tests''' || v 5.1.5-38 || Failures: 1 || || Failures: 2 ||
|-
|| '''Apache Tests''' || v 2.2.14-3 || Success || || ||
|-
|| '''Expect Tests''' || v 5.43.0-11 || Success || || Success ||
|-
|| '''Groff Tests''' || v 1.20.1-5 || Success || || Success ||
|-
|| '''Raptor Tests''' || v 1.4.19-3 || Success || || Success ||
|-
|| '''Rsync Tests''' || v 3.0.6-3 || Success || || Success ||
|-
|| '''Samba Tests''' || v 3.4.3-5 || Success || || Success ||
|-
|| '''Tcl Tests''' || v 8.5.7-6 || Success || || Success ||
|-
|| '''Xpdf Tests''' || v 1.01-10 || Success || || Failures: 1 ||
|}

==Analysis of result==
Below table shows the failed test cases.
* '''Total failures''': The number of total failures after running test. It includes known problems and real failures which should be fixed.
* '''[[LSB_Bug_tracker | Known problem]]''': Known problem means it is a bug of LSB itself and we can find trace these bugs on http://bugs.linuxbase.org. On link page we give a summary of known problems.
* '''Failures(need to fix)''' : Real failures we should fix them
===x86-32 (emenlw)===
We have 4 failures to fix.
* Core tests: 2
* Xts5 Tests:1
* Perl Tests:1
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 12 || 10 || 2 || ||
|-
|| '''Desktop Tests''' || 2 || 2 || || ||
|-
|| '''Desktop-T2C Tests''' || 2 || 2 || || ||
|-
|| '''OLVER Core Tests''' || 10 || 10 || || ||
|-
|| '''Perl Tests''' || 1 || || 1 || ||
|-
|| '''Printing Tests''' || 1 || 1 || || ||
|-
|| '''Qt4-Azov Tests''' || 5 || 5 || || ||
|-
|| '''Xts5 Tests''' || 1 || || 1 || ||
|}

===ppc(mpc8315e)===
We have the following failures(including "unresolved" and "failed") to fix.
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 66 || 10 || 47(unresolved), 8(failed), 1(unreported) || ||
|-
|| '''Desktop Tests''' || 24 || 20 || 2(unresolved), 1(failed), 1 unreported || ||
|-
|| '''Desktop-T2C Tests''' || 17 || 2 || 15(unresolved) || ||
|-
|| '''Libstdc++ Tests''' || 2 || || 2 || ||
|-
|| '''OLVER Core Tests''' || || || || Blocked ||
|-
|| '''Perl Tests''' || 1 || || 1 || ||
|-
|| '''Printing Tests''' || 3 || 1 || 1(unresolved), 1(failure), 1(unreported) || ||
|-
|| '''Qt3-Azov''' || 106 || || 106(unresolved) || ||
|-
|| '''Qt4-Azov''' || 46 || 1 || 45(unresolved) || ||
|-
|| '''Xts5 Tests''' || 2 || || 2 || ||
|-
|| '''Xpdf Tests''' || 1 || || 1 || ||
|}
* Core Tests:
** /tset/ANSI.os/math/... : SIGILL error cause 47 unresolved failures.
* OLVER Core Tests:
** OLVER Core Tests can't be finished on mpc8315e-rdb
** We think the reason which make test blocked is the low memory(128M on mpc8315e). Because we re-run the test case which is blocked during OLVER core tests and it can pass successfully. That is to say, if we run the single test case, it will be passed. But we run all OLVER core tests and the whole tests will be blocked. We have ever run OLVER Core Tests for nearly 50 hours and it can't finish.
** lsb-test-olver-core may require about 512Mb of system memory (with an X server and a contemporary desktop running), as well as 2Gb of free disk space to complete a test run. The reference linkage: http://ldn.linuxfoundation.org/lsb/preparing-lsb-distribution-testing
* Qt3-Azov Tests:
** Out of memory error cause all of the failures

==Failures tracker==
We should fix the following problems. We also filed bugs for them and try to fix them.
{|border="1"
|| '''Tests''' || '''Sub Tests''' || '''Test Number''' || '''Arch''' || '''Bug ID of yocto''' || '''Proposal suggestion''' ||
|-
|| '''Core Tests''' || /tset/LSB.fhs/var/lib/lib-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| '''Core Tests''' || /tset/LSB.fhs/var/lib-misc/lib-misc-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| '''Xts5 Tests''' || /tset/Xopen/strtkysym/Test || 7 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 || http://git.pokylinux.org/cgit.cgi/poky-contrib/commit/?h=jingdonglu/distro&id=c6dde065b9fafabeda6904c23118a11e99d23e08 ||
|-
|| '''Perl Tests''' || ../ext/IPC/SysV/t/ipcsysv.t || 294 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1078 || Maybe a LSB bug(we have filed if as a bug on LSB bugzilla ||
|}

==Known problems tracker
See details on [[LSB_Bug_tracker | Known problems tracker]]==

LSB Result

2011-05-25T10:53:59Z

Jingdong Lu: /* Test Environment */

==Introduction==
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)

==Test Environment==
* Image: core-image-lsb-qt3
* Platform: x86-32(emenlow), x86-64(), ppc(mpc8315e-rdb)

==result==
Below table shows the result of LSB Test on different platforms.

{|border="1"
|| '''Test''' || '''Version''' || '''X86-32(emenlow)''' || '''X86-64()''' || '''ppc(mpc8315e-rdb)''' ||
|-
|| '''Command Check''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Library Check''' || v 4.1.0-1 || Warning || || Warning ||
|-
|| '''Alsa-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Core Tests''' || v 4.1.0-1 || Failures: 12 || || Failures: 66 ||
|-
|| '''Core-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Cpp-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Desktop Tests''' || v 4.1.0-2 || Failures: 2 || || Failures: 24 ||
|-
|| '''Desktop-T2C Tests''' || v 4.1.0-1 || Failures: 2 || || Failures: 17 ||
|-
|| '''Libstdc++ Tests''' || v 4.1.0-13 || Success || || Failures: 2 ||
|-
|| '''OLVER Core Tests''' || v 4.1.0-1 || Failures: 10 || || Block ||
|-
|| '''Perl Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 1 ||
|-
|| '''Printing Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 3 ||
|-
|| '''Python Runtime Tests''' || v 4.1.1-2 || Success || || Success ||
|-
|| '''Qt3-Azov Tests''' || v 4.1.0-1 || Success || || Failures: 106 ||
|-
|| '''Qt4-Azov Tests''' || v 4.1.0-1 ||Failures: 5 || || Failures: 46 ||
|-
|| '''Xml2-Azov Tests''' || v 4.1.0-1 ||Success || || Success ||
|-
|| '''Xts5 Tests''' || v 5.1.5-38 || Failures: 1 || || Failures: 2 ||
|-
|| '''Apache Tests''' || v 2.2.14-3 || Success || || ||
|-
|| '''Expect Tests''' || v 5.43.0-11 || Success || || Success ||
|-
|| '''Groff Tests''' || v 1.20.1-5 || Success || || Success ||
|-
|| '''Raptor Tests''' || v 1.4.19-3 || Success || || Success ||
|-
|| '''Rsync Tests''' || v 3.0.6-3 || Success || || Success ||
|-
|| '''Samba Tests''' || v 3.4.3-5 || Success || || Success ||
|-
|| '''Tcl Tests''' || v 8.5.7-6 || Success || || Success ||
|-
|| '''Xpdf Tests''' || v 1.01-10 || Success || || Failures: 1 ||
|}

==Analysis of result==
Below table shows the failed test cases.
* '''Total failures''': The number of total failures after running test. It includes known problems and real failures which should be fixed.
* '''[[LSB_Bug_tracker | Known problem]]''': Known problem means it is a bug of LSB itself and we can find trace these bugs on http://bugs.linuxbase.org. On link page we give a summary of known problems.
* '''Failures(need to fix)''' : Real failures we should fix them
===x86-32 (emenlw)===
We have 4 failures to fix.
* Core tests: 2
* Xts5 Tests:1
* Perl Tests:1
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 12 || 10 || 2 || ||
|-
|| '''Desktop Tests''' || 2 || 2 || || ||
|-
|| '''Desktop-T2C Tests''' || 2 || 2 || || ||
|-
|| '''OLVER Core Tests''' || 10 || 10 || || ||
|-
|| '''Perl Tests''' || 1 || || 1 || ||
|-
|| '''Printing Tests''' || 1 || 1 || || ||
|-
|| '''Qt4-Azov Tests''' || 5 || 5 || || ||
|-
|| '''Xts5 Tests''' || 1 || || 1 || ||
|}

===ppc(mpc8315e)===
We have the following failures(including "unresolved" and "failed") to fix.
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 66 || 10 || 47(unresolved), 8(failed), 1(unreported) || ||
|-
|| '''Desktop Tests''' || 24 || 20 || 2(unresolved), 1(failed), 1 unreported || ||
|-
|| '''Desktop-T2C Tests''' || 17 || 2 || 15(unresolved) || ||
|-
|| '''Libstdc++ Tests''' || 2 || || 2 || ||
|-
|| '''OLVER Core Tests''' || || || || Blocked ||
|-
|| '''Perl Tests''' || 1 || || 1 || ||
|-
|| '''Printing Tests''' || 3 || 1 || 1(unresolved), 1(failure), 1(unreported) || ||
|-
|| '''Qt3-Azov''' || 106 || || 106(unresolved) || ||
|-
|| '''Qt4-Azov''' || 46 || 1 || 45(unresolved) || ||
|-
|| '''Xts5 Tests''' || 2 || || 2 || ||
|-
|| '''Xpdf Tests''' || 1 || || 1 || ||
|}
* Core Tests:
** /tset/ANSI.os/math/... : SIGILL error cause 47 unresolved failures.
* OLVER Core Tests:
** OLVER Core Tests can't be finished on mpc8315e-rdb
** We think the reason which make test blocked is the low memory(128M on mpc8315e). Because we re-run the test case which is blocked during OLVER core tests and it can pass successfully. That is to say, if we run the single test case, it will be passed. But we run all OLVER core tests and the whole tests will be blocked. We have ever run OLVER Core Tests for nearly 50 hours and it can't finish.
** lsb-test-olver-core may require about 512Mb of system memory (with an X server and a contemporary desktop running), as well as 2Gb of free disk space to complete a test run. The reference linkage: http://ldn.linuxfoundation.org/lsb/preparing-lsb-distribution-testing
* Qt3-Azov Tests:
** Out of memory error cause all of the failures

==Failures tracker==
We should fix the following problems. We also filed bugs for them and try to fix them.
{|border="1"
|| '''Tests''' || '''Sub Tests''' || '''Test Number''' || '''Arch''' || '''Bug ID of yocto''' || '''Proposal suggestion''' ||
|-
|| Core Tests || /tset/LSB.fhs/var/lib/lib-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| Core Tests || /tset/LSB.fhs/var/lib-misc/lib-misc-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| Xts5 Tests || /tset/Xopen/strtkysym/Test || 7 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 || http://git.pokylinux.org/cgit.cgi/poky-contrib/commit/?h=jingdonglu/distro&id=c6dde065b9fafabeda6904c23118a11e99d23e08 ||
|-
|| Perl Tests || ../ext/IPC/SysV/t/ipcsysv.t || 294 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1078 || Maybe a LSB bug(we have filed if as a bug on LSB bugzilla ||
|}

==Known problems tracker
See details on [[LSB_Bug_tracker | Known problems tracker]]==

LSB Result

2011-05-25T10:53:36Z

Jingdong Lu: /* Known problem tracker */

==Introduction==
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)

==Test Environment==
Image: core-image-lsb-qt3
Platform: x86-32(emenlow), x86-64(), ppc(mpc8315e-rdb)

==result==
Below table shows the result of LSB Test on different platforms.

{|border="1"
|| '''Test''' || '''Version''' || '''X86-32(emenlow)''' || '''X86-64()''' || '''ppc(mpc8315e-rdb)''' ||
|-
|| '''Command Check''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Library Check''' || v 4.1.0-1 || Warning || || Warning ||
|-
|| '''Alsa-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Core Tests''' || v 4.1.0-1 || Failures: 12 || || Failures: 66 ||
|-
|| '''Core-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Cpp-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Desktop Tests''' || v 4.1.0-2 || Failures: 2 || || Failures: 24 ||
|-
|| '''Desktop-T2C Tests''' || v 4.1.0-1 || Failures: 2 || || Failures: 17 ||
|-
|| '''Libstdc++ Tests''' || v 4.1.0-13 || Success || || Failures: 2 ||
|-
|| '''OLVER Core Tests''' || v 4.1.0-1 || Failures: 10 || || Block ||
|-
|| '''Perl Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 1 ||
|-
|| '''Printing Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 3 ||
|-
|| '''Python Runtime Tests''' || v 4.1.1-2 || Success || || Success ||
|-
|| '''Qt3-Azov Tests''' || v 4.1.0-1 || Success || || Failures: 106 ||
|-
|| '''Qt4-Azov Tests''' || v 4.1.0-1 ||Failures: 5 || || Failures: 46 ||
|-
|| '''Xml2-Azov Tests''' || v 4.1.0-1 ||Success || || Success ||
|-
|| '''Xts5 Tests''' || v 5.1.5-38 || Failures: 1 || || Failures: 2 ||
|-
|| '''Apache Tests''' || v 2.2.14-3 || Success || || ||
|-
|| '''Expect Tests''' || v 5.43.0-11 || Success || || Success ||
|-
|| '''Groff Tests''' || v 1.20.1-5 || Success || || Success ||
|-
|| '''Raptor Tests''' || v 1.4.19-3 || Success || || Success ||
|-
|| '''Rsync Tests''' || v 3.0.6-3 || Success || || Success ||
|-
|| '''Samba Tests''' || v 3.4.3-5 || Success || || Success ||
|-
|| '''Tcl Tests''' || v 8.5.7-6 || Success || || Success ||
|-
|| '''Xpdf Tests''' || v 1.01-10 || Success || || Failures: 1 ||
|}

==Analysis of result==
Below table shows the failed test cases.
* '''Total failures''': The number of total failures after running test. It includes known problems and real failures which should be fixed.
* '''[[LSB_Bug_tracker | Known problem]]''': Known problem means it is a bug of LSB itself and we can find trace these bugs on http://bugs.linuxbase.org. On link page we give a summary of known problems.
* '''Failures(need to fix)''' : Real failures we should fix them
===x86-32 (emenlw)===
We have 4 failures to fix.
* Core tests: 2
* Xts5 Tests:1
* Perl Tests:1
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 12 || 10 || 2 || ||
|-
|| '''Desktop Tests''' || 2 || 2 || || ||
|-
|| '''Desktop-T2C Tests''' || 2 || 2 || || ||
|-
|| '''OLVER Core Tests''' || 10 || 10 || || ||
|-
|| '''Perl Tests''' || 1 || || 1 || ||
|-
|| '''Printing Tests''' || 1 || 1 || || ||
|-
|| '''Qt4-Azov Tests''' || 5 || 5 || || ||
|-
|| '''Xts5 Tests''' || 1 || || 1 || ||
|}

===ppc(mpc8315e)===
We have the following failures(including "unresolved" and "failed") to fix.
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 66 || 10 || 47(unresolved), 8(failed), 1(unreported) || ||
|-
|| '''Desktop Tests''' || 24 || 20 || 2(unresolved), 1(failed), 1 unreported || ||
|-
|| '''Desktop-T2C Tests''' || 17 || 2 || 15(unresolved) || ||
|-
|| '''Libstdc++ Tests''' || 2 || || 2 || ||
|-
|| '''OLVER Core Tests''' || || || || Blocked ||
|-
|| '''Perl Tests''' || 1 || || 1 || ||
|-
|| '''Printing Tests''' || 3 || 1 || 1(unresolved), 1(failure), 1(unreported) || ||
|-
|| '''Qt3-Azov''' || 106 || || 106(unresolved) || ||
|-
|| '''Qt4-Azov''' || 46 || 1 || 45(unresolved) || ||
|-
|| '''Xts5 Tests''' || 2 || || 2 || ||
|-
|| '''Xpdf Tests''' || 1 || || 1 || ||
|}
* Core Tests:
** /tset/ANSI.os/math/... : SIGILL error cause 47 unresolved failures.
* OLVER Core Tests:
** OLVER Core Tests can't be finished on mpc8315e-rdb
** We think the reason which make test blocked is the low memory(128M on mpc8315e). Because we re-run the test case which is blocked during OLVER core tests and it can pass successfully. That is to say, if we run the single test case, it will be passed. But we run all OLVER core tests and the whole tests will be blocked. We have ever run OLVER Core Tests for nearly 50 hours and it can't finish.
** lsb-test-olver-core may require about 512Mb of system memory (with an X server and a contemporary desktop running), as well as 2Gb of free disk space to complete a test run. The reference linkage: http://ldn.linuxfoundation.org/lsb/preparing-lsb-distribution-testing
* Qt3-Azov Tests:
** Out of memory error cause all of the failures

==Failures tracker==
We should fix the following problems. We also filed bugs for them and try to fix them.
{|border="1"
|| '''Tests''' || '''Sub Tests''' || '''Test Number''' || '''Arch''' || '''Bug ID of yocto''' || '''Proposal suggestion''' ||
|-
|| Core Tests || /tset/LSB.fhs/var/lib/lib-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| Core Tests || /tset/LSB.fhs/var/lib-misc/lib-misc-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| Xts5 Tests || /tset/Xopen/strtkysym/Test || 7 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 || http://git.pokylinux.org/cgit.cgi/poky-contrib/commit/?h=jingdonglu/distro&id=c6dde065b9fafabeda6904c23118a11e99d23e08 ||
|-
|| Perl Tests || ../ext/IPC/SysV/t/ipcsysv.t || 294 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1078 || Maybe a LSB bug(we have filed if as a bug on LSB bugzilla ||
|}

==Known problems tracker
See details on [[LSB_Bug_tracker | Known problems tracker]]==

LSB Result

2011-05-25T10:51:14Z

Jingdong Lu:

==Introduction==
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)

==Test Environment==
Image: core-image-lsb-qt3
Platform: x86-32(emenlow), x86-64(), ppc(mpc8315e-rdb)

==result==
Below table shows the result of LSB Test on different platforms.

{|border="1"
|| '''Test''' || '''Version''' || '''X86-32(emenlow)''' || '''X86-64()''' || '''ppc(mpc8315e-rdb)''' ||
|-
|| '''Command Check''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Library Check''' || v 4.1.0-1 || Warning || || Warning ||
|-
|| '''Alsa-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Core Tests''' || v 4.1.0-1 || Failures: 12 || || Failures: 66 ||
|-
|| '''Core-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Cpp-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Desktop Tests''' || v 4.1.0-2 || Failures: 2 || || Failures: 24 ||
|-
|| '''Desktop-T2C Tests''' || v 4.1.0-1 || Failures: 2 || || Failures: 17 ||
|-
|| '''Libstdc++ Tests''' || v 4.1.0-13 || Success || || Failures: 2 ||
|-
|| '''OLVER Core Tests''' || v 4.1.0-1 || Failures: 10 || || Block ||
|-
|| '''Perl Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 1 ||
|-
|| '''Printing Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 3 ||
|-
|| '''Python Runtime Tests''' || v 4.1.1-2 || Success || || Success ||
|-
|| '''Qt3-Azov Tests''' || v 4.1.0-1 || Success || || Failures: 106 ||
|-
|| '''Qt4-Azov Tests''' || v 4.1.0-1 ||Failures: 5 || || Failures: 46 ||
|-
|| '''Xml2-Azov Tests''' || v 4.1.0-1 ||Success || || Success ||
|-
|| '''Xts5 Tests''' || v 5.1.5-38 || Failures: 1 || || Failures: 2 ||
|-
|| '''Apache Tests''' || v 2.2.14-3 || Success || || ||
|-
|| '''Expect Tests''' || v 5.43.0-11 || Success || || Success ||
|-
|| '''Groff Tests''' || v 1.20.1-5 || Success || || Success ||
|-
|| '''Raptor Tests''' || v 1.4.19-3 || Success || || Success ||
|-
|| '''Rsync Tests''' || v 3.0.6-3 || Success || || Success ||
|-
|| '''Samba Tests''' || v 3.4.3-5 || Success || || Success ||
|-
|| '''Tcl Tests''' || v 8.5.7-6 || Success || || Success ||
|-
|| '''Xpdf Tests''' || v 1.01-10 || Success || || Failures: 1 ||
|}

==Analysis of result==
Below table shows the failed test cases.
* '''Total failures''': The number of total failures after running test. It includes known problems and real failures which should be fixed.
* '''[[LSB_Bug_tracker | Known problem]]''': Known problem means it is a bug of LSB itself and we can find trace these bugs on http://bugs.linuxbase.org. On link page we give a summary of known problems.
* '''Failures(need to fix)''' : Real failures we should fix them
===x86-32 (emenlw)===
We have 4 failures to fix.
* Core tests: 2
* Xts5 Tests:1
* Perl Tests:1
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 12 || 10 || 2 || ||
|-
|| '''Desktop Tests''' || 2 || 2 || || ||
|-
|| '''Desktop-T2C Tests''' || 2 || 2 || || ||
|-
|| '''OLVER Core Tests''' || 10 || 10 || || ||
|-
|| '''Perl Tests''' || 1 || || 1 || ||
|-
|| '''Printing Tests''' || 1 || 1 || || ||
|-
|| '''Qt4-Azov Tests''' || 5 || 5 || || ||
|-
|| '''Xts5 Tests''' || 1 || || 1 || ||
|}

===ppc(mpc8315e)===
We have the following failures(including "unresolved" and "failed") to fix.
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 66 || 10 || 47(unresolved), 8(failed), 1(unreported) || ||
|-
|| '''Desktop Tests''' || 24 || 20 || 2(unresolved), 1(failed), 1 unreported || ||
|-
|| '''Desktop-T2C Tests''' || 17 || 2 || 15(unresolved) || ||
|-
|| '''Libstdc++ Tests''' || 2 || || 2 || ||
|-
|| '''OLVER Core Tests''' || || || || Blocked ||
|-
|| '''Perl Tests''' || 1 || || 1 || ||
|-
|| '''Printing Tests''' || 3 || 1 || 1(unresolved), 1(failure), 1(unreported) || ||
|-
|| '''Qt3-Azov''' || 106 || || 106(unresolved) || ||
|-
|| '''Qt4-Azov''' || 46 || 1 || 45(unresolved) || ||
|-
|| '''Xts5 Tests''' || 2 || || 2 || ||
|-
|| '''Xpdf Tests''' || 1 || || 1 || ||
|}
* Core Tests:
** /tset/ANSI.os/math/... : SIGILL error cause 47 unresolved failures.
* OLVER Core Tests:
** OLVER Core Tests can't be finished on mpc8315e-rdb
** We think the reason which make test blocked is the low memory(128M on mpc8315e). Because we re-run the test case which is blocked during OLVER core tests and it can pass successfully. That is to say, if we run the single test case, it will be passed. But we run all OLVER core tests and the whole tests will be blocked. We have ever run OLVER Core Tests for nearly 50 hours and it can't finish.
** lsb-test-olver-core may require about 512Mb of system memory (with an X server and a contemporary desktop running), as well as 2Gb of free disk space to complete a test run. The reference linkage: http://ldn.linuxfoundation.org/lsb/preparing-lsb-distribution-testing
* Qt3-Azov Tests:
** Out of memory error cause all of the failures

==Failures tracker==
We should fix the following problems. We also filed bugs for them and try to fix them.
{|border="1"
|| '''Tests''' || '''Sub Tests''' || '''Test Number''' || '''Arch''' || '''Bug ID of yocto''' || '''Proposal suggestion''' ||
|-
|| Core Tests || /tset/LSB.fhs/var/lib/lib-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| Core Tests || /tset/LSB.fhs/var/lib-misc/lib-misc-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=xiaofeng/sudo
||
|-
|| Xts5 Tests || /tset/Xopen/strtkysym/Test || 7 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 || http://git.pokylinux.org/cgit.cgi/poky-contrib/commit/?h=jingdonglu/distro&id=c6dde065b9fafabeda6904c23118a11e99d23e08 ||
|-
|| Perl Tests || ../ext/IPC/SysV/t/ipcsysv.t || 294 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1078 || Maybe a LSB bug(we have filed if as a bug on LSB bugzilla ||
|}

==[[LSB_Bug_tracker | Known problem tracker]]==

LSB Result

2011-05-25T10:46:10Z

Jingdong Lu: /* x86-32 (emenlw) */

==Introduction==
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)

==Test Environment==
Image: core-image-lsb-qt3
Platform: x86-32(emenlow), x86-64(), ppc(mpc8315e-rdb)

==result==
Below table shows the result of LSB Test on different platforms.

{|border="1"
|| '''Test''' || '''Version''' || '''X86-32(emenlow)''' || '''X86-64()''' || '''ppc(mpc8315e-rdb)''' ||
|-
|| '''Command Check''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Library Check''' || v 4.1.0-1 || Warning || || Warning ||
|-
|| '''Alsa-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Core Tests''' || v 4.1.0-1 || Failures: 12 || || Failures: 66 ||
|-
|| '''Core-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Cpp-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Desktop Tests''' || v 4.1.0-2 || Failures: 2 || || Failures: 24 ||
|-
|| '''Desktop-T2C Tests''' || v 4.1.0-1 || Failures: 2 || || Failures: 17 ||
|-
|| '''Libstdc++ Tests''' || v 4.1.0-13 || Success || || Failures: 2 ||
|-
|| '''OLVER Core Tests''' || v 4.1.0-1 || Failures: 10 || || Block ||
|-
|| '''Perl Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 1 ||
|-
|| '''Printing Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 3 ||
|-
|| '''Python Runtime Tests''' || v 4.1.1-2 || Success || || Success ||
|-
|| '''Qt3-Azov Tests''' || v 4.1.0-1 || Success || || Failures: 106 ||
|-
|| '''Qt4-Azov Tests''' || v 4.1.0-1 ||Failures: 5 || || Failures: 46 ||
|-
|| '''Xml2-Azov Tests''' || v 4.1.0-1 ||Success || || Success ||
|-
|| '''Xts5 Tests''' || v 5.1.5-38 || Failures: 1 || || Failures: 2 ||
|-
|| '''Apache Tests''' || v 2.2.14-3 || Success || || ||
|-
|| '''Expect Tests''' || v 5.43.0-11 || Success || || Success ||
|-
|| '''Groff Tests''' || v 1.20.1-5 || Success || || Success ||
|-
|| '''Raptor Tests''' || v 1.4.19-3 || Success || || Success ||
|-
|| '''Rsync Tests''' || v 3.0.6-3 || Success || || Success ||
|-
|| '''Samba Tests''' || v 3.4.3-5 || Success || || Success ||
|-
|| '''Tcl Tests''' || v 8.5.7-6 || Success || || Success ||
|-
|| '''Xpdf Tests''' || v 1.01-10 || Success || || Failures: 1 ||
|}

==Analysis of result==
Below table shows the failed test cases.
* '''Total failures''': The number of total failures after running test. It includes known problems and real failures which should be fixed.
* '''[[LSB_Bug_tracker | Known problem]]''': Known problem means it is a bug of LSB itself and we can find trace these bugs on http://bugs.linuxbase.org. On link page we give a summary of known problems.
* '''Failures(need to fix)''' : Real failures we should fix them
===x86-32 (emenlw)===
We have 4 failures to fix.
* Core tests: 2
* Xts5 Tests:1
* Perl Tests:1
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 12 || 10 || 2 || ||
|-
|| '''Desktop Tests''' || 2 || 2 || || ||
|-
|| '''Desktop-T2C Tests''' || 2 || 2 || || ||
|-
|| '''OLVER Core Tests''' || 10 || 10 || || ||
|-
|| '''Perl Tests''' || 1 || || 1 || ||
|-
|| '''Printing Tests''' || 1 || 1 || || ||
|-
|| '''Qt4-Azov Tests''' || 5 || 5 || || ||
|-
|| '''Xts5 Tests''' || 1 || || 1 || ||
|}

===ppc(mpc8315e)===
We have the following failures(including "unresolved" and "failed") to fix.
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 66 || 10 || 47(unresolved), 8(failed), 1(unreported) || ||
|-
|| '''Desktop Tests''' || 24 || 20 || 2(unresolved), 1(failed), 1 unreported || ||
|-
|| '''Desktop-T2C Tests''' || 17 || 2 || 15(unresolved) || ||
|-
|| '''Libstdc++ Tests''' || 2 || || 2 || ||
|-
|| '''OLVER Core Tests''' || || || || Blocked ||
|-
|| '''Perl Tests''' || 1 || || 1 || ||
|-
|| '''Printing Tests''' || 3 || 1 || 1(unresolved), 1(failure), 1(unreported) || ||
|-
|| '''Qt3-Azov''' || 106 || || 106(unresolved) || ||
|-
|| '''Qt4-Azov''' || 46 || 1 || 45(unresolved) || ||
|-
|| '''Xts5 Tests''' || 2 || || 2 || ||
|-
|| '''Xpdf Tests''' || 1 || || 1 || ||
|}
* Core Tests:
** /tset/ANSI.os/math/... : SIGILL error cause 47 unresolved failures.
* OLVER Core Tests:
** OLVER Core Tests can't be finished on mpc8315e-rdb
** We think the reason which make test blocked is the low memory(128M on mpc8315e). Because we re-run the test case which is blocked during OLVER core tests and it can pass successfully. That is to say, if we run the single test case, it will be passed. But we run all OLVER core tests and the whole tests will be blocked. We have ever run OLVER Core Tests for nearly 50 hours and it can't finish.
** lsb-test-olver-core may require about 512Mb of system memory (with an X server and a contemporary desktop running), as well as 2Gb of free disk space to complete a test run. The reference linkage: http://ldn.linuxfoundation.org/lsb/preparing-lsb-distribution-testing
* Qt3-Azov Tests:
** Out of memory error cause all of the failures

==Failures tracker==
We should fix the following problems. We also filed bugs for them and try to fix them.
{|border="1"
|| '''Tests''' || '''Sub Tests''' || '''Test Number''' || '''Arch''' || '''Bug ID of yocto''' || '''Proposal suggestion''' ||
|-
|| Core Tests || /tset/LSB.fhs/var/lib/lib-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || ||
|-
|| Core Tests || /tset/LSB.fhs/var/lib-misc/lib-misc-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || ||
|-
|| Xts5 Tests || /tset/Xopen/strtkysym/Test || 7 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 || ||
|-
|| Perl Tests || ../ext/IPC/SysV/t/ipcsysv.t || 294 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1078 ||
|}

LSB Result

2011-05-25T10:45:30Z

Jingdong Lu: /* ppc(mpc8315e) */

==Introduction==
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)

==Test Environment==
Image: core-image-lsb-qt3
Platform: x86-32(emenlow), x86-64(), ppc(mpc8315e-rdb)

==result==
Below table shows the result of LSB Test on different platforms.

{|border="1"
|| '''Test''' || '''Version''' || '''X86-32(emenlow)''' || '''X86-64()''' || '''ppc(mpc8315e-rdb)''' ||
|-
|| '''Command Check''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Library Check''' || v 4.1.0-1 || Warning || || Warning ||
|-
|| '''Alsa-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Core Tests''' || v 4.1.0-1 || Failures: 12 || || Failures: 66 ||
|-
|| '''Core-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Cpp-T2C Tests''' || v 4.1.0-1 || Success || || Success ||
|-
|| '''Desktop Tests''' || v 4.1.0-2 || Failures: 2 || || Failures: 24 ||
|-
|| '''Desktop-T2C Tests''' || v 4.1.0-1 || Failures: 2 || || Failures: 17 ||
|-
|| '''Libstdc++ Tests''' || v 4.1.0-13 || Success || || Failures: 2 ||
|-
|| '''OLVER Core Tests''' || v 4.1.0-1 || Failures: 10 || || Block ||
|-
|| '''Perl Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 1 ||
|-
|| '''Printing Tests''' || v 4.1.0-1 || Failures: 1 || || Failures: 3 ||
|-
|| '''Python Runtime Tests''' || v 4.1.1-2 || Success || || Success ||
|-
|| '''Qt3-Azov Tests''' || v 4.1.0-1 || Success || || Failures: 106 ||
|-
|| '''Qt4-Azov Tests''' || v 4.1.0-1 ||Failures: 5 || || Failures: 46 ||
|-
|| '''Xml2-Azov Tests''' || v 4.1.0-1 ||Success || || Success ||
|-
|| '''Xts5 Tests''' || v 5.1.5-38 || Failures: 1 || || Failures: 2 ||
|-
|| '''Apache Tests''' || v 2.2.14-3 || Success || || ||
|-
|| '''Expect Tests''' || v 5.43.0-11 || Success || || Success ||
|-
|| '''Groff Tests''' || v 1.20.1-5 || Success || || Success ||
|-
|| '''Raptor Tests''' || v 1.4.19-3 || Success || || Success ||
|-
|| '''Rsync Tests''' || v 3.0.6-3 || Success || || Success ||
|-
|| '''Samba Tests''' || v 3.4.3-5 || Success || || Success ||
|-
|| '''Tcl Tests''' || v 8.5.7-6 || Success || || Success ||
|-
|| '''Xpdf Tests''' || v 1.01-10 || Success || || Failures: 1 ||
|}

==Analysis of result==
Below table shows the failed test cases.
* '''Total failures''': The number of total failures after running test. It includes known problems and real failures which should be fixed.
* '''[[LSB_Bug_tracker | Known problem]]''': Known problem means it is a bug of LSB itself and we can find trace these bugs on http://bugs.linuxbase.org. On link page we give a summary of known problems.
* '''Failures(need to fix)''' : Real failures we should fix them
===x86-32 (emenlw)===
We have 4 failures to fix.
** Core tests: 2
** Xts5 Tests:1
** Perl Tests:1
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 12 || 10 || 2 || ||
|-
|| '''Desktop Tests''' || 2 || 2 || || ||
|-
|| '''Desktop-T2C Tests''' || 2 || 2 || || ||
|-
|| '''OLVER Core Tests''' || 10 || 10 || || ||
|-
|| '''Perl Tests''' || 1 || || 1 || ||
|-
|| '''Printing Tests''' || 1 || 1 || || ||
|-
|| '''Qt4-Azov Tests''' || 5 || 5 || || ||
|-
|| '''Xts5 Tests''' || 1 || || 1 || ||
|}

===ppc(mpc8315e)===
We have the following failures(including "unresolved" and "failed") to fix.
{|border="1"
|| '''Test''' || '''Total failures''' || '''Known problem''' || '''Failures(need to fix)''' || '''Note''' ||
|-
|| '''Core Tests''' || 66 || 10 || 47(unresolved), 8(failed), 1(unreported) || ||
|-
|| '''Desktop Tests''' || 24 || 20 || 2(unresolved), 1(failed), 1 unreported || ||
|-
|| '''Desktop-T2C Tests''' || 17 || 2 || 15(unresolved) || ||
|-
|| '''Libstdc++ Tests''' || 2 || || 2 || ||
|-
|| '''OLVER Core Tests''' || || || || Blocked ||
|-
|| '''Perl Tests''' || 1 || || 1 || ||
|-
|| '''Printing Tests''' || 3 || 1 || 1(unresolved), 1(failure), 1(unreported) || ||
|-
|| '''Qt3-Azov''' || 106 || || 106(unresolved) || ||
|-
|| '''Qt4-Azov''' || 46 || 1 || 45(unresolved) || ||
|-
|| '''Xts5 Tests''' || 2 || || 2 || ||
|-
|| '''Xpdf Tests''' || 1 || || 1 || ||
|}
* Core Tests:
** /tset/ANSI.os/math/... : SIGILL error cause 47 unresolved failures.
* OLVER Core Tests:
** OLVER Core Tests can't be finished on mpc8315e-rdb
** We think the reason which make test blocked is the low memory(128M on mpc8315e). Because we re-run the test case which is blocked during OLVER core tests and it can pass successfully. That is to say, if we run the single test case, it will be passed. But we run all OLVER core tests and the whole tests will be blocked. We have ever run OLVER Core Tests for nearly 50 hours and it can't finish.
** lsb-test-olver-core may require about 512Mb of system memory (with an X server and a contemporary desktop running), as well as 2Gb of free disk space to complete a test run. The reference linkage: http://ldn.linuxfoundation.org/lsb/preparing-lsb-distribution-testing
* Qt3-Azov Tests:
** Out of memory error cause all of the failures

==Failures tracker==
We should fix the following problems. We also filed bugs for them and try to fix them.
{|border="1"
|| '''Tests''' || '''Sub Tests''' || '''Test Number''' || '''Arch''' || '''Bug ID of yocto''' || '''Proposal suggestion''' ||
|-
|| Core Tests || /tset/LSB.fhs/var/lib/lib-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || ||
|-
|| Core Tests || /tset/LSB.fhs/var/lib-misc/lib-misc-tc || 1 || x86-32, x86-64, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 || ||
|-
|| Xts5 Tests || /tset/Xopen/strtkysym/Test || 7 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 || ||
|-
|| Perl Tests || ../ext/IPC/SysV/t/ipcsysv.t || 294 || x86-32, ppc || http://bugzilla.pokylinux.org/show_bug.cgi?id=1078 ||
|}

LSB Result

2011-05-25T10:36:33Z

Jingdong Lu: /* Analysis of result */

LSB Result

2011-05-25T10:24:41Z

Jingdong Lu: /* Analysis of result */

LSB Bug tracker

2011-05-25T10:10:47Z

Jingdong Lu: Created page with '==LSB Bug tracker== Below table is a summary of known problems during LSB tests. We can find these issues on http://bugs.linuxbase.org. {|border="1" || '''Test''' || '''SubTest'…'

==LSB Bug tracker==
Below table is a summary of known problems during LSB tests. We can find these issues on http://bugs.linuxbase.org.
{|border="1"
|| '''Test''' || '''SubTest''' || '''TestCase''' || '''TestNumber''' || '''Arch''' || '''Need fix?''' || '''Notes''' || '''Upstream Bugtracker''' || '''Yocto Bug id''' ||
|-
|| Core Tests || || /tset/POSIX.os/devclass/c_iflag/T.c_iflag || 6, 7, 8, 9 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3033 || ||
|-
|| Core Tests || || /tset/POSIX.os/devclass/tcgetattr || 1, 2 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3033 || ||
|-
|| Core Tests || || /tset/LSB.os/ioprim/readv_L/T.readv_L || 24 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=844 || ||
|-
|| Core Tests || || /tset/LSB.os/ioprim/writev_L/T.writev_L || 30 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=844 || ||
|-
|| Desktop || desktop-gtkvts || /tests/functions/Param_Value/Param_Value || 20 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3044 || ||
|-
|| Desktop || desktop-gtkvts || /tests/functions/Selection/Selections || 33, 34 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3011 || ||
|-
|| Desktop-T2C Tests || || /freetype-t2c/tests/truetype_tables/truetype_tables || 2 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3153 || ||
|-
|| Desktop-T2C Tests || || /gobject-t2c/tests/gobject_gtype_instance/gobject_gtype_instance || 39 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3184 || ||
|-
|| OLVER Core Tests || || /olver/math/cexp/tests/cpow_spec || 5162 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2912 || ||
|-
|| OLVER Core Tests || locale_locale_scenario || /olver/other/other/tests/others || 1 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || ncurses_string_insert_scenario || /olver/other/other/tests/others || 2 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || ncurses_string_add_scenario || /olver/other/other/tests/others || 3 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || || /olver/other/other/tests/others || 561 || x86-32, x86-64 || N || Known Problem || http://linuxtesting.org/results/report?num=S0561 || ||
|-
|| OLVER Core Tests || ncurses_line_rip_scenario || /olver/other/other/tests/others || 5 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || || /olver/util/compress/tests/gzputc_spec || 1 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3057 || ||
|-
|| OLVER Core Tests || || /olver/util/format/tests/getdata_spec || 803 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2913 || ||
|-
|| OLVER Core Tests || || /olver/util/format/tests/strptime_spec || 810, 808 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2914 || ||
|-
|| Qt4-Azov Tests || || /Qt4_Input_Output-t2c/tests/QFileInfo/QFileInfo || 45 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3034 || ||
|-
|| Qt4-Azov Tests || || /Qt4_Menus-t2c/tests/QMenuBar/QMenuBar || 30 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3124 || ||
|-
|| Qt4-Azov Tests || || /Qt5_Menus-t2c/tests/QMenuBar/QMenuBar || 49 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3067 || ||
|-
|| Qt4-Azov Tests || || /Qt4_Miscellaneous-t2c/tests/Qt4_Miscellaneous/Qt4_Miscellaneous || 1 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3134 || ||
|-
|| Qt4-Azov Tests || || /Qt4_SQL-t2c/tests/QSqlTableModel/QSqlTableModel || 46 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2782 || ||
|-
|| Printing Tests || || /testgs/testgs || 7 || x86-32, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2994 || ||
|}

LSB Result

2011-05-25T10:07:37Z

Jingdong Lu: /* Analysis of result */

LSB Result

2011-05-25T09:58:24Z

Jingdong Lu:

LSB Result

2011-05-25T09:40:58Z

Jingdong Lu:

LSB Result

2011-05-25T09:35:56Z

Jingdong Lu:

LSB Result

2011-05-25T09:18:27Z

Jingdong Lu:

==Introduction==
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)

===result===
Below table shows the problems of LSB Test

|| || || %BLUE%X86-32%ENDCOLOR%|| %BLUE%X86-64 ||%BLUE%mpc8315e%ENDCOLOR% ||
||%BLUE%Command Tests%ENDCOLOR%|| ||
||Command Check || v 4.1.0-1 || %GREEN%Success%ENDCOLOR% || ||%GREEN%Success%ENDCOLOR% ||
||%BLUE%Static Interface Tests%ENDCOLOR%|| ||
||Library Check || v 4.1.0-1 || %YELLOW%Warning%ENDCOLOR% || || %YELLOW%Warning%ENDCOLOR% ||
||%BLUE%Runtime Interface Tests%ENDCOLOR%|| ||
||Alsa-T2C Tests || v 4.1.0-1 ||%GREEN%Success%ENDCOLOR% || ||%GREEN%Success%ENDCOLOR% ||
||Core Tests || v 4.1.0-1 ||%RED%Failures: 12 || ||%RED%Failures: 66 ||
||Core-T2C Tests || v 4.1.0-1 ||%GREEN%Success%ENDCOLOR% || ||%GREEN%Success%ENDCOLOR% ||
||Cpp-T2C Tests || v 4.1.0-1 ||%GREEN%Success%ENDCOLOR% || ||%GREEN%Success%ENDCOLOR% ||
||Desktop Tests || v 4.1.0-2 ||%RED%Failures: 2 || ||%RED%Failures: 24 ||
||Desktop-T2C Tests || v 4.1.0-1 ||%GREEN%Failures: 2 || ||%RED%Failures: 17 ||
||Libstdc++ Tests || v 4.1.0-13 ||%GREEN%Success%ENDCOLOR% || ||%RED%Failures: 2 ||
||OLVER Core Tests || v 4.1.0-1 ||%GREEN%Failures: 10 || ||%RED%Block||
||Perl Tests || v 4.1.0-1 ||%RED%Failures: 1 || ||%RED%Failures: 1 ||
||Printing Tests || v 4.1.0-1 ||%GREEN%Failures: 1 || ||%RED%Failures: 3||
||Python Runtime Tests || v 4.1.1-2 ||%GREEN%Success%ENDCOLOR% || ||%GREEN%Success%ENDCOLOR% ||
||Qt3-Azov Tests || v 4.1.0-1 ||%GREEN%Success%ENDCOLOR% || ||%RED%Failures: 106 ||
||Qt4-Azov Tests || v 4.1.0-1 ||%GREEN%Failures: 5%ENDCOLOR% || ||%RED%Failures: 46 ||
||Xml2-Azov Tests || v 4.1.0-1 ||%GREEN%Success%ENDCOLOR% || || %GREEN%Success%ENDCOLOR% ||
||Xts5 Tests || v 5.1.5-38 ||%RED%Failures: 1 || ||%RED%Failures: 2 ||
||%BLUE%Automated Application Battery Tests%ENDCOLOR%|| ||
||Apache Tests || v 2.2.14-3 || %GREEN%Success%ENDCOLOR% || || ||
||Expect Tests || v 5.43.0-11 ||%GREEN%Success%ENDCOLOR% || ||%GREEN%Success%ENDCOLOR% ||
||Groff Tests || v 1.20.1-5 ||%GREEN%Success%ENDCOLOR% || ||%GREEN%Success%ENDCOLOR% ||
||Raptor Tests || v 1.4.19-3 ||%GREEN%Success%ENDCOLOR% || ||%GREEN%Success%ENDCOLOR% ||
||Rsync Tests || v 3.0.6-3 ||%GREEN%Success%ENDCOLOR% || ||%GREEN%Success%ENDCOLOR% ||
||Samba Tests || v 3.4.3-5 ||%GREEN%Success%ENDCOLOR% || ||%GREEN%Success%ENDCOLOR% ||
||Tcl Tests || v 8.5.7-6 ||%GREEN%Success%ENDCOLOR% || ||%GREEN%Success%ENDCOLOR% ||
||Xpdf Tests || v 1.01-10 ||%GREEN%Success%ENDCOLOR% || ||%RED%Failures: 1 ||

* '''Known Problem''': LSB bug or known problem
* '''Failure''':

{|border="1"
|| '''Test''' || '''SubTest''' || '''TestCase''' || '''TestNumber''' || '''Arch''' || '''Need fix?''' || '''Notes''' || '''Upstream Bugtracker''' || '''Yocto Bug id''' ||
|-
|| Core Tests || || /tset/POSIX.os/devclass/c_iflag/T.c_iflag || 6, 7, 8, 9 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3033 || ||
|-
|| Core Tests || || /tset/POSIX.os/devclass/tcgetattr || 1, 2 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3033 || ||
|-
|| Core Tests || || /tset/LSB.os/ioprim/readv_L/T.readv_L || 24 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=844 || ||
|-
|| Core Tests || || /tset/LSB.os/ioprim/writev_L/T.writev_L || 30 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=844 || ||
|-
|| Core Tests || || /tset/LSB.fhs/var/lib/lib-tc || 1 || x86-32, x86-64, ppc || Y || '''Failure''' || || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 ||
|-
|| Core Tests || || /tset/LSB.fhs/var/lib-misc/lib-misc-tc || 1 || x86-32, x86-64, ppc || Y || '''Failure''' || || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 ||
|-
|| Desktop || desktop-gtkvts || /tests/functions/Param_Value/Param_Value || 20 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3044 || ||
|-
|| Desktop || desktop-gtkvts || /tests/functions/Selection/Selections || 33, 34 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3011 || ||
|-
|| Desktop-T2C Tests || || /freetype-t2c/tests/truetype_tables/truetype_tables || 2 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3153 || ||
|-
|| Desktop-T2C Tests || || /gobject-t2c/tests/gobject_gtype_instance/gobject_gtype_instance || 39 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3184 || ||
|-
|| OLVER Core Tests || || /olver/math/cexp/tests/cpow_spec || 5162 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2912 || ||
|-
|| OLVER Core Tests || locale_locale_scenario || /olver/other/other/tests/others || 1 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || ncurses_string_insert_scenario || /olver/other/other/tests/others || 2 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || ncurses_string_add_scenario || /olver/other/other/tests/others || 3 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || || /olver/other/other/tests/others || 561 || x86-32, x86-64 || N || Known Problem || http://linuxtesting.org/results/report?num=S0561 || ||
|-
|| OLVER Core Tests || ncurses_line_rip_scenario || /olver/other/other/tests/others || 5 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || || /olver/util/compress/tests/gzputc_spec || 1 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3057 || ||
|-
|| OLVER Core Tests || || /olver/util/format/tests/getdata_spec || 803 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2913 || ||
|-
|| OLVER Core Tests || || /olver/util/format/tests/strptime_spec || 810, 808 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2914 || ||
|-
|| Qt4-Azov Tests || || /Qt4_Input_Output-t2c/tests/QFileInfo/QFileInfo || 45 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3034 || ||
|-
|| Qt4-Azov Tests || || /Qt4_Menus-t2c/tests/QMenuBar/QMenuBar || 30 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3124 || ||
|-
|| Qt4-Azov Tests || || /Qt5_Menus-t2c/tests/QMenuBar/QMenuBar || 49 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3067 || ||
|-
|| Qt4-Azov Tests || || /Qt4_Miscellaneous-t2c/tests/Qt4_Miscellaneous/Qt4_Miscellaneous || 1 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3134 || ||
|-
|| Qt4-Azov Tests || || /Qt4_SQL-t2c/tests/QSqlTableModel/QSqlTableModel || 46 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2782 || ||
|-
|| Xts5 Tests || || /tset/Xopen/strtkysym/Test || 7 || x86-32, ppc || Y || '''Failure''' || || http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 ||
|-
|| Printing Tests || || /testgs/testgs || 7 || x86-32, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2994 || ||

LSB Result

2011-05-25T09:17:42Z

Jingdong Lu:

==Introduction==
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)

===result===
Below table shows the problems of LSB Test

| | | %BLUE%X86-32%ENDCOLOR%| %BLUE%X86-64 |%BLUE%mpc8315e%ENDCOLOR% |
|%BLUE%Command Tests%ENDCOLOR%| |
|Command Check | v 4.1.0-1 | %GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|%BLUE%Static Interface Tests%ENDCOLOR%| |
|Library Check | v 4.1.0-1 | %YELLOW%Warning%ENDCOLOR% | | %YELLOW%Warning%ENDCOLOR% |
|%BLUE%Runtime Interface Tests%ENDCOLOR%| |
|Alsa-T2C Tests | v 4.1.0-1 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Core Tests | v 4.1.0-1 |%RED%Failures: 12 | |%RED%Failures: 66 |
|Core-T2C Tests | v 4.1.0-1 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Cpp-T2C Tests | v 4.1.0-1 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Desktop Tests | v 4.1.0-2 |%RED%Failures: 2 | |%RED%Failures: 24 |
|Desktop-T2C Tests | v 4.1.0-1 |%GREEN%Failures: 2 | |%RED%Failures: 17 |
|Libstdc++ Tests | v 4.1.0-13 |%GREEN%Success%ENDCOLOR% | |%RED%Failures: 2 |
|OLVER Core Tests | v 4.1.0-1 |%GREEN%Failures: 10 | |%RED%Block|
|Perl Tests | v 4.1.0-1 |%RED%Failures: 1 | |%RED%Failures: 1 |
|Printing Tests | v 4.1.0-1 |%GREEN%Failures: 1 | |%RED%Failures: 3|
|Python Runtime Tests | v 4.1.1-2 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Qt3-Azov Tests | v 4.1.0-1 |%GREEN%Success%ENDCOLOR% | |%RED%Failures: 106 |
|Qt4-Azov Tests | v 4.1.0-1 |%GREEN%Failures: 5%ENDCOLOR% | |%RED%Failures: 46 |
|Xml2-Azov Tests | v 4.1.0-1 |%GREEN%Success%ENDCOLOR% | | %GREEN%Success%ENDCOLOR% |
|Xts5 Tests | v 5.1.5-38 |%RED%Failures: 1 | |%RED%Failures: 2 |
|%BLUE%Automated Application Battery Tests%ENDCOLOR%| |
|Apache Tests | v 2.2.14-3 | %GREEN%Success%ENDCOLOR% | | |
|Expect Tests | v 5.43.0-11 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Groff Tests | v 1.20.1-5 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Raptor Tests | v 1.4.19-3 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Rsync Tests | v 3.0.6-3 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Samba Tests | v 3.4.3-5 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Tcl Tests | v 8.5.7-6 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Xpdf Tests | v 1.01-10 |%GREEN%Success%ENDCOLOR% | |%RED%Failures: 1 |

|a | b | c |
|d | e | f |

* '''Known Problem''': LSB bug or known problem
* '''Failure''':

{|border="1"
|| '''Test''' || '''SubTest''' || '''TestCase''' || '''TestNumber''' || '''Arch''' || '''Need fix?''' || '''Notes''' || '''Upstream Bugtracker''' || '''Yocto Bug id''' ||
|-
|| Core Tests || || /tset/POSIX.os/devclass/c_iflag/T.c_iflag || 6, 7, 8, 9 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3033 || ||
|-
|| Core Tests || || /tset/POSIX.os/devclass/tcgetattr || 1, 2 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3033 || ||
|-
|| Core Tests || || /tset/LSB.os/ioprim/readv_L/T.readv_L || 24 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=844 || ||
|-
|| Core Tests || || /tset/LSB.os/ioprim/writev_L/T.writev_L || 30 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=844 || ||
|-
|| Core Tests || || /tset/LSB.fhs/var/lib/lib-tc || 1 || x86-32, x86-64, ppc || Y || '''Failure''' || || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 ||
|-
|| Core Tests || || /tset/LSB.fhs/var/lib-misc/lib-misc-tc || 1 || x86-32, x86-64, ppc || Y || '''Failure''' || || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 ||
|-
|| Desktop || desktop-gtkvts || /tests/functions/Param_Value/Param_Value || 20 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3044 || ||
|-
|| Desktop || desktop-gtkvts || /tests/functions/Selection/Selections || 33, 34 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3011 || ||
|-
|| Desktop-T2C Tests || || /freetype-t2c/tests/truetype_tables/truetype_tables || 2 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3153 || ||
|-
|| Desktop-T2C Tests || || /gobject-t2c/tests/gobject_gtype_instance/gobject_gtype_instance || 39 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3184 || ||
|-
|| OLVER Core Tests || || /olver/math/cexp/tests/cpow_spec || 5162 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2912 || ||
|-
|| OLVER Core Tests || locale_locale_scenario || /olver/other/other/tests/others || 1 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || ncurses_string_insert_scenario || /olver/other/other/tests/others || 2 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || ncurses_string_add_scenario || /olver/other/other/tests/others || 3 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || || /olver/other/other/tests/others || 561 || x86-32, x86-64 || N || Known Problem || http://linuxtesting.org/results/report?num=S0561 || ||
|-
|| OLVER Core Tests || ncurses_line_rip_scenario || /olver/other/other/tests/others || 5 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || || /olver/util/compress/tests/gzputc_spec || 1 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3057 || ||
|-
|| OLVER Core Tests || || /olver/util/format/tests/getdata_spec || 803 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2913 || ||
|-
|| OLVER Core Tests || || /olver/util/format/tests/strptime_spec || 810, 808 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2914 || ||
|-
|| Qt4-Azov Tests || || /Qt4_Input_Output-t2c/tests/QFileInfo/QFileInfo || 45 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3034 || ||
|-
|| Qt4-Azov Tests || || /Qt4_Menus-t2c/tests/QMenuBar/QMenuBar || 30 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3124 || ||
|-
|| Qt4-Azov Tests || || /Qt5_Menus-t2c/tests/QMenuBar/QMenuBar || 49 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3067 || ||
|-
|| Qt4-Azov Tests || || /Qt4_Miscellaneous-t2c/tests/Qt4_Miscellaneous/Qt4_Miscellaneous || 1 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3134 || ||
|-
|| Qt4-Azov Tests || || /Qt4_SQL-t2c/tests/QSqlTableModel/QSqlTableModel || 46 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2782 || ||
|-
|| Xts5 Tests || || /tset/Xopen/strtkysym/Test || 7 || x86-32, ppc || Y || '''Failure''' || || http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 ||
|-
|| Printing Tests || || /testgs/testgs || 7 || x86-32, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2994 || ||

LSB Result

2011-05-25T09:17:06Z

Jingdong Lu:

==Introduction==
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)

===result===
Below table shows the problems of LSB Test

| | | %BLUE%X86-32%ENDCOLOR%| %BLUE%X86-64 |%BLUE%mpc8315e%ENDCOLOR% |
|%BLUE%Command Tests%ENDCOLOR%| |
|Command Check | v 4.1.0-1 | %GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|%BLUE%Static Interface Tests%ENDCOLOR%| |
|Library Check | v 4.1.0-1 | %YELLOW%Warning%ENDCOLOR% | | %YELLOW%Warning%ENDCOLOR% |
|%BLUE%Runtime Interface Tests%ENDCOLOR%| |
|Alsa-T2C Tests | v 4.1.0-1 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Core Tests | v 4.1.0-1 |%RED%Failures: 12 | |%RED%Failures: 66 |
|Core-T2C Tests | v 4.1.0-1 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Cpp-T2C Tests | v 4.1.0-1 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Desktop Tests | v 4.1.0-2 |%RED%Failures: 2 | |%RED%Failures: 24 |
|Desktop-T2C Tests | v 4.1.0-1 |%GREEN%Failures: 2 | |%RED%Failures: 17 |
|Libstdc++ Tests | v 4.1.0-13 |%GREEN%Success%ENDCOLOR% | |%RED%Failures: 2 |
|OLVER Core Tests | v 4.1.0-1 |%GREEN%Failures: 10 | |%RED%Block|
|Perl Tests | v 4.1.0-1 |%RED%Failures: 1 | |%RED%Failures: 1 |
|Printing Tests | v 4.1.0-1 |%GREEN%Failures: 1 | |%RED%Failures: 3|
|Python Runtime Tests | v 4.1.1-2 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Qt3-Azov Tests | v 4.1.0-1 |%GREEN%Success%ENDCOLOR% | |%RED%Failures: 106 |
|Qt4-Azov Tests | v 4.1.0-1 |%GREEN%Failures: 5%ENDCOLOR% | |%RED%Failures: 46 |
|Xml2-Azov Tests | v 4.1.0-1 |%GREEN%Success%ENDCOLOR% | | %GREEN%Success%ENDCOLOR% |
|Xts5 Tests | v 5.1.5-38 |%RED%Failures: 1 | |%RED%Failures: 2 |
|%BLUE%Automated Application Battery Tests%ENDCOLOR%| |
|Apache Tests | v 2.2.14-3 | %GREEN%Success%ENDCOLOR% | | |
|Expect Tests | v 5.43.0-11 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Groff Tests | v 1.20.1-5 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Raptor Tests | v 1.4.19-3 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Rsync Tests | v 3.0.6-3 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Samba Tests | v 3.4.3-5 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Tcl Tests | v 8.5.7-6 |%GREEN%Success%ENDCOLOR% | |%GREEN%Success%ENDCOLOR% |
|Xpdf Tests | v 1.01-10 |%GREEN%Success%ENDCOLOR% | |%RED%Failures: 1 |

* '''Known Problem''': LSB bug or known problem
* '''Failure''':

{|border="1"
|| '''Test''' || '''SubTest''' || '''TestCase''' || '''TestNumber''' || '''Arch''' || '''Need fix?''' || '''Notes''' || '''Upstream Bugtracker''' || '''Yocto Bug id''' ||
|-
|| Core Tests || || /tset/POSIX.os/devclass/c_iflag/T.c_iflag || 6, 7, 8, 9 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3033 || ||
|-
|| Core Tests || || /tset/POSIX.os/devclass/tcgetattr || 1, 2 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3033 || ||
|-
|| Core Tests || || /tset/LSB.os/ioprim/readv_L/T.readv_L || 24 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=844 || ||
|-
|| Core Tests || || /tset/LSB.os/ioprim/writev_L/T.writev_L || 30 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=844 || ||
|-
|| Core Tests || || /tset/LSB.fhs/var/lib/lib-tc || 1 || x86-32, x86-64, ppc || Y || '''Failure''' || || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 ||
|-
|| Core Tests || || /tset/LSB.fhs/var/lib-misc/lib-misc-tc || 1 || x86-32, x86-64, ppc || Y || '''Failure''' || || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 ||
|-
|| Desktop || desktop-gtkvts || /tests/functions/Param_Value/Param_Value || 20 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3044 || ||
|-
|| Desktop || desktop-gtkvts || /tests/functions/Selection/Selections || 33, 34 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3011 || ||
|-
|| Desktop-T2C Tests || || /freetype-t2c/tests/truetype_tables/truetype_tables || 2 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3153 || ||
|-
|| Desktop-T2C Tests || || /gobject-t2c/tests/gobject_gtype_instance/gobject_gtype_instance || 39 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3184 || ||
|-
|| OLVER Core Tests || || /olver/math/cexp/tests/cpow_spec || 5162 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2912 || ||
|-
|| OLVER Core Tests || locale_locale_scenario || /olver/other/other/tests/others || 1 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || ncurses_string_insert_scenario || /olver/other/other/tests/others || 2 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || ncurses_string_add_scenario || /olver/other/other/tests/others || 3 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || || /olver/other/other/tests/others || 561 || x86-32, x86-64 || N || Known Problem || http://linuxtesting.org/results/report?num=S0561 || ||
|-
|| OLVER Core Tests || ncurses_line_rip_scenario || /olver/other/other/tests/others || 5 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || || /olver/util/compress/tests/gzputc_spec || 1 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3057 || ||
|-
|| OLVER Core Tests || || /olver/util/format/tests/getdata_spec || 803 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2913 || ||
|-
|| OLVER Core Tests || || /olver/util/format/tests/strptime_spec || 810, 808 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2914 || ||
|-
|| Qt4-Azov Tests || || /Qt4_Input_Output-t2c/tests/QFileInfo/QFileInfo || 45 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3034 || ||
|-
|| Qt4-Azov Tests || || /Qt4_Menus-t2c/tests/QMenuBar/QMenuBar || 30 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3124 || ||
|-
|| Qt4-Azov Tests || || /Qt5_Menus-t2c/tests/QMenuBar/QMenuBar || 49 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3067 || ||
|-
|| Qt4-Azov Tests || || /Qt4_Miscellaneous-t2c/tests/Qt4_Miscellaneous/Qt4_Miscellaneous || 1 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3134 || ||
|-
|| Qt4-Azov Tests || || /Qt4_SQL-t2c/tests/QSqlTableModel/QSqlTableModel || 46 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2782 || ||
|-
|| Xts5 Tests || || /tset/Xopen/strtkysym/Test || 7 || x86-32, ppc || Y || '''Failure''' || || http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 ||
|-
|| Printing Tests || || /testgs/testgs || 7 || x86-32, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2994 || ||

LSB Result

2011-05-24T07:47:00Z

Jingdong Lu: /* result */

LSB Result

2011-05-24T07:45:42Z

Jingdong Lu: /* result */

LSB Result

2011-05-24T07:44:58Z

Jingdong Lu: /* result */

==Introduction==
The Linux Standard Base(LSB) was created to lower the overall costs of supporting the Linux platform. By reducing the differences between individual Linux distributions, the LSB greatly reduces the costs involved with porting applications to different distributions, as well as lowers the cost and effort involved in after-market support of those applications. (http://www.linuxfoundation.org/collaborate/workgroups/lsb)

===result===
Below table shows the problems of LSB Test
* '''Known Problem''': LSB bug or known problem
* '''Failure''':

{|border="1"
|| '''Test''' || '''SubTest''' || '''TestCase''' || '''TestNumber''' || '''Arch''' || '''Need fix?''' || '''Notes''' || '''Upstream Bugtracker''' || '''Yocto Bug id''' ||
|-
|| Core Tests || || /tset/POSIX.os/devclass/c_iflag/T.c_iflag || 6, 7, 8, 9 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3033 || ||
|-
|| Core Tests || || /tset/POSIX.os/devclass/tcgetattr || 1, 2 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3033 || ||
|-
|| Core Tests || || /tset/LSB.os/ioprim/readv_L/T.readv_L || 24 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=844 || ||
|-
|| Core Tests || || /tset/LSB.os/ioprim/writev_L/T.writev_L || 30 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=844 || ||
|-
|| Core Tests || || /tset/LSB.fhs/var/lib/lib-tc || 1 || x86-32, x86-64, ppc || Y || '''Failure''' || || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 ||
|-
|| Core Tests || || /tset/LSB.fhs/var/lib-misc/lib-misc-tc || 1 || x86-32, x86-64, ppc || Y || '''Failure''' || || http://bugzilla.pokylinux.org/show_bug.cgi?id=1092 ||
|-
|| Desktop || desktop-gtkvts || /tests/functions/Param_Value/Param_Value || 20 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3044 || ||
|-
|| Desktop || desktop-gtkvts || /tests/functions/Selection/Selections || 33, 34 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3011 || ||
|-
|| Desktop-T2C Tests || || /freetype-t2c/tests/truetype_tables/truetype_tables || 2 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3153 || ||
|-
|| Desktop-T2C Tests || || /gobject-t2c/tests/gobject_gtype_instance/gobject_gtype_instance || 39 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3184 || ||
|-
|| OLVER Core Tests || || /olver/math/cexp/tests/cpow_spec || 5162 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2912 || ||
|-
|| OLVER Core Tests || locale_locale_scenario || /olver/other/other/tests/others || 1 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || ncurses_string_insert_scenario || /olver/other/other/tests/others || 2 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || ncurses_string_add_scenario || /olver/other/other/tests/others || 3 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || || /olver/other/other/tests/others || 561 || x86-32, x86-64 || N || Known Problem || http://linuxtesting.org/results/report?num=S0561 || ||
|-
|| OLVER Core Tests || ncurses_line_rip_scenario || /olver/other/other/tests/others || 5 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2871 || ||
|-
|| OLVER Core Tests || || /olver/util/compress/tests/gzputc_spec || 1 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3057 || ||
|-
|| OLVER Core Tests || || /olver/util/format/tests/getdata_spec || 803 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2913 || ||
|-
|| OLVER Core Tests || || /olver/util/format/tests/strptime_spec || 810, 808 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2914 || ||
|-
|| OLVER Core Tests || || /olver/util/format/tests/strptime_spec || 810 || x86-32, x86-64 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2914 || ||
|-
|| Qt4-Azov Tests || || /Qt4_Input_Output-t2c/tests/QFileInfo/QFileInfo || 45 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3034 || ||
|-
|| Qt4-Azov Tests || || /Qt4_Menus-t2c/tests/QMenuBar/QMenuBar || 30 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3124 || ||
|-
|| Qt4-Azov Tests || || /Qt5_Menus-t2c/tests/QMenuBar/QMenuBar || 49 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3067 || ||
|-
|| Qt4-Azov Tests || || /Qt4_Miscellaneous-t2c/tests/Qt4_Miscellaneous/Qt4_Miscellaneous || 1 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=3134 || ||
|-
|| Qt4-Azov Tests || || /Qt4_SQL-t2c/tests/QSqlTableModel/QSqlTableModel || 46 || x86-32, x86-64, ppc || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2782 || ||
|-
|| Xts5 Tests || || /tset/Xopen/strtkysym/Test || 7 || x86-32 || Y || '''Failure''' || || http://bugzilla.pokylinux.org/show_bug.cgi?id=1095 ||
|-
|| Printing Tests || || /testgs/testgs || 7 || x86-32 || N || Known Problem || http://bugs.linuxbase.org/show_bug.cgi?id=2994 || ||

LSB Result

2011-05-22T07:38:08Z

Jingdong Lu: /* result */

LSB Result

2011-05-22T07:19:22Z

Jingdong Lu: /* result */

LSB Result

2011-05-22T07:15:36Z

Jingdong Lu: /* result */

LSB Result

2011-05-21T06:30:51Z

Jingdong Lu: /* result */

LSB Result

2011-05-21T06:16:50Z

Jingdong Lu: /* result */

LSB Result

2011-05-21T06:15:30Z

Jingdong Lu: /* result */

LSB Result

2011-05-21T06:13:04Z

Jingdong Lu: /* result */

LSB Result

2011-05-21T06:05:35Z

Jingdong Lu: /* result */

LSB Result

2011-05-21T06:03:40Z

Jingdong Lu: /* emenlow(x86-32) */